Behringer Ct100 Specification Sheet CT100_SPECS_Rev. A.PMD

CT100 CT100

: Behringer Behringer-Ct100-Specification-Sheet-751859 behringer-ct100-specification-sheet-751859 behringer pdf

Open the PDF directly: View PDF .
Page Count: 3

CABLE TESTER CT100

Version 1.0 March 2003

Technical Specifications

ENGLISH

CABLE TESTER CT100

2

CT100

Microprocessor Controlled 6 in 1 Cable Tester

sAccepts XLR, mono and TRS phone (1/4", 1/8", TT), RCA and

MIDI connectors

sSports three different testing modes: cable test mode, installed

cable test mode and test tone mode

sDetects phantom power, intermittent connections and indicates

the cables internal wiring

sChecks signal continuity

sGenerates different test tones (1 kHz and 440 Hz) to fast-

check your gear when your lab is out of reach

sGenerates test tones with various signal levels (+4 dBu, -10

dBV and -50 dBV mic level)

sBattery operation (requires two AA alkaline batteriesnot

included)

sBelt clip included

sDurable, professional quality input/output connectors

sManufactured under BEHRINGERs stringent quality control

system

CABLE TESTER CT100

3

The information contained in this publication is subject to change without notice.

No part of this publication may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and recording of any kind, for any purpose,

without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.

BEHRINGER is a registered trademark. ALL RIGHTS RESERVED.

© 2003 BEHRINGER Spezielle Studiotechnik GmbH.

BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,

47877 Willich-Münchheide II, Germany

Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30