Behringer Ddx3216 Users Manual DDX3216_A_Specs.p65

Behringer DDX3216 Specification Sheet ddx3216_p0066_s_en Behringer - DDX3216 - Specification Sheet

Behringer DDX3216 Specification Sheet DDX3216_P0066_S_EN Behringer - DDX3216 - Specification Sheet

DDX3216 to the manual 44f4228c-cbf2-47ec-8f4f-eb4ef77ae01d

Behringer DDX3216 Specification Sheet ddx3216_p0066_s_en Behringer - DDX3216 - Specification Sheet

: Behringer Behringer-Ddx3216-Users-Manual-362803 behringer-ddx3216-users-manual-362803 behringer pdf

Open the PDF directly: View PDF .
Page Count: 4

www.behringer.com

ENGLISH

Version 1.0 November 2001

TECH. SPECIFICATIONS

2

Fully automated 32-channel 16-bus 24-bit digital mixing console

IState-of-the-art 32-channel 24-bit digital mixing console

I32 full-fledged channels, 12 ULN (Ultra Low-Noise) mic preamps with analog inserts and switchable phantom power

I16 busses, 8 aux sends and internal input/output patchbay for comprehensive routing options

IFully featured dynamic and snapshot automation

I17 ultra-precise, low-noise 100-mm motorized ALPS® faders

ICompressor/limiter plus gate on all 32 channels

I4-band fully parametric EQ, sweepable high-pass filter and phase reverse on all 32 channels

IAdditional delay on channels 1-16

IFour simultaneously operable effects processors with dozens of first-class algorithms, accessible from all 32 channels

IAdditional compressor/limiter (switchable pre/post) and EQ for stereo main mix

ITwo option slots, three power-packed options for unlimited connectivity (16-channel ADAT®, 16-channel TDIF, 8-channel AES/EBU)

IAnalog feel, intuitive user interface

IHigh-power floating point DSP technology (32-/40-bit) ensures virtually unlimited internal dynamic range

IUltra high-resolution 24-bit AKM® A/D and CRYSTAL® D/A converters

IFreely configurable level meters on all channels

IChannel controlllers with LED rings control any of nine parameters, selectable per channel

IFour freely assignable analog outputs on balanced 1/4" TRS connectors

ISix master controllers with comfortable push-and-turn functionality

ILarge, easy-to-read LCD display with adjustable contrast

ISynchronization via SMPTE, MTC or internal clock

IDither, word length and noise shaping adjustable for digital main outputs

IMIDI and RS232 connectors allow communication with a PC or other devices

IExtensive MIDI implementation (MMC, program changes, control changes, MIDI sysex)

IPCM/CIA card slot for saving/loading various libraries and other settings

IFree PC software for data transmission and management downloadable at www.ddx3216.com (serial cable included)

I19" rack-mounting kit included

IComprehensive Web support area with downloads, tips, application examples and more: www.ddx3216.com

IManufactured under ISO9000 certified management system

3

SPECIFICATIONS

Mono inputs 1-12

Microphone input

Type electronically balanced,

discrete input stage

Connector XLR

Gain +10 to +60 dB (PAD = -20 dB)

Input impedance approx. 1,5k Ω @ 1 kHz

THD + Noise 0.05 %, 20 Hz to 20 kHz, +60 dB

gain, -42 dBu at input

Max. input level +1 dBu (minimum gain)

S/N ratio 95 dB, 20 Hz to 20 kHz, gain 1,

0 dBu at input

Equivalent noise -90 dB, 20 Hz to 20 kHz, input

termination: 150 Ω

Crosstalk < -85 dB (channel 1 against chan-

nel 2), +60 dB gain, -42 dBu at input

Line input

Type electronically balanced

Connector 1/4" TRS connector

Gain -10 to +40 dB (PAD = -20 dB)

Input impedance approx. 16k Ω @ 1 kHz

THD + Noise 0.02 %, 20 Hz to 20 kHz,

+20 dB gain, -20 dBu at input

Max. input level +24 dBu (minimum gain)

S/N ratio 92 dB, 20 Hz to 20 kHz,

gain 1, 0 dBu at input

Equivalent noise -88 dB, 20 Hz to 20 kHz,

input termination: 150 Ω

Crosstalk < -90 dB (channel 1 against chan-

nel 2), gain 1, 0 dBu at input

Stereo inputs 13-16

Type electronically balanced

Connector 1/4" TRS connector

Gain -20 to +20 dB

Input impedance approx. 20k Ω @ 1 kHz

THD + Noise 0.015 %, gain 1, 0 dB at input,

measured at main out

Max. input level +22 dBu (minimum gain)

S/N ratio 86 dB, 20 Hz to 20 kHz, gain 1

(measured at main out)

Equivalent noise -85 dB, 20 Hz to 20 kHz,

(measured at main out) input termination: 150 Ω

Crosstalk < -85 dB (channel 13 against chan-

(measured at main out) nel 14), gain 1, 0 dBu at input

Main outputs

Type servo-balanced

Connector XLR

Output impedance approx. 160 Ω @ 1 kHz

Max. output level +16 dBu

Multi outputs

Type servo-balanced

Connector 1/4" TRS connector

Output impedance approx. 160 Ω @ 1 kHz

Max. output level +16 dBu

Control Room outputs

Type servo-balanced

Connector 1/4" TRS connector

Output impedance approx. 160 Ω @ 1 kHz

Max. output level +16 dBu

S/PDIF digital input/output

Input Connector RCA

Special feature Sample rate converter

(32 to 50 kHz)

Output Connector RCA

Dither 16, 20 and 24 bits

Special feature Noise shaping

Wordclock input/output

Input Connector BNC

Input impedance 20 kΩ

Output Connector BNC

Output impedance 30 Ω

Signal type TTL level square wave

SMPTE input

Connector XLR

Input impedance 20k Ω

RS232 port

Connector 9-pin DIN jack

Transmission 115,200 bauds, 8 data bits,

1 stop bit, no parity

System specifications

Sampling rate 44.1 and 48 kHz

(internal and external)

Signal delay <1.6 ms at 48 kHz, channel input

against main out

Frequency response 20 Hz to 20 kHz, +/- 0.1 dB

Faders

Type 100-mm ALPS® motorized faders

Resolution +12 from 0 to -oo dB

(256 increments)

Converters

A/D converters

Resolution 24-bit delta-sigma AKM®

Oversampling 128 times

Dynamic range 116 dB typ.

D/A converters

Resolution 24-bit delta-sigma CRYSTAL®

Oversampling 128 times

Dynamic range 106 dB typ.

MIDI interface

Type 5-pin DIN jacks

Connectors MIDI IN, MIDI THRU and MIDI OUT

Level meters

Channel 16-digit LED display

Main 2 x 16-digit LED display

Special feature Peak-hold function

(off, 0-29 s, and oo)

Mono inputs 1-12, microphone (minimum gain)

Sig LED -46 dBu at input

Clip LED 0 dBu at input

Mono inputs 1-12, line (minimum gain)

Sig LED -25 dBu at input

Clip LED +23 dBu at input

Stereo inputs 13-16 (gain at center position)

Sig LED -36 dBu at input

Clip LED +10 dBu at input

Accessories

ADT1616 16 (2 x 8) inputs and 16 (2 x 8) output,

ADAT® digital interface (optical)

TDIF1616 16 (2 x 8) inputs and 16 (2 x 8) outputs,

TDIF digital interface (25-pin D-Sub)

AES808 8 inputs and 8 outputs, AES/EBU

digital interface (25-pin D-Sub)

ACB808P 19" interface box for AES808, with

4 x XLR inputs and 4 x XLR outputs

Power supply

Power consumption approx. 68 W

Fuse 100 to 240 V ~: T 4 A H

Mains connector Standard IEC receptacle

Physical

Dimensions (H * W * D) approx. 6 ½" x 17 ¼" x 22 ½"

(163 mm x 438 mm x 572 mm)

Weight (net) approx. 29 ¾" lbs (13.5 kg)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of

these efforts, modifications may be made from time to time to existing products without prior

notice. Specifications and appearance may differ from those listed or illustrated.

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form

or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written

permission of BEHRINGER Spezielle Studiotechnik GmbH.

BEHRINGER is a registered trademarks. ALL RIGHTS RESERVED.

AKM, ALESIS, ALPS, ANALOG DEVICES, CRYSTAL, TASCAM, WINDOWS, ADAT, DTRS and SHARC are all registered

trademarks of their respective owners, which are in no way associated or affiliated with BEHRINGER.

© 2001 BEHRINGER Spezielle Studiotechnik GmbH.

BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany

Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30

4