Behringer Europower Ep2000 Brochure EP4000/EP2000
Behringer EP2000 Brochure EP2000_EP4000_WebBrochure Behringer - EP2000 - Brochure
Behringer EP2000 Brochure ep2000_ep4000_webbrochure Behringer - EP2000 - Brochure
Behringer EP2000 Brochure ep2000_ep4000_webbrochure Behringer - EP2000 - Brochure
2015-06-29
: Behringer Behringer-Europower-Ep2000-Brochure-751583 behringer-europower-ep2000-brochure-751583 behringer pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
PA Amplifiers EUROPOWER EP4000/EP2000 4000 & 2000-Watt EUROPOWER Stereo Power Amplifiers with ATR (Accelerated Transient Response) Technology EP4000: 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode) EP2000: 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode) Precise Power, Signal and Clip LEDs to monitor performance XLR and ¼" TRS input connectors for compatibility with any source Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies Independent limiters per channel offer reliable protection against overload and distortion High-current toroidal transformer for ultra-high transient response and absolute reliability Ultra-reliable Toshiba/Fairchild power transistors Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system including air filter for reliable operation “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany The EP2000 and EP4000 represent everything musicians love about our popular EP1500/EP2500—excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces. amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it’s an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you’re feeling lucky. Everything you need, nothing you don’t Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system’s capabilities). The über-simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input. Panel discussion A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode. Continued on next page Page 2 of 4 These amps have guts There’s plenty of awesome features on the outside of the EP2000 and EP4000, but there’s also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There’s no need for fuses, giving you one fewer potential mid-gig headache. EUROPOWER EP4000/EP2000 The EP2000 and EP4000 have both XLR and ¼" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you’re dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impactresistant, all-steel 2U rack-mount chassis helps these workhorses stand up to all the rigors of the road. Continued on next page POWER switch CLIP LED GAIN controls SIGNAL LED XLR input (channel 1) BREAKER (automated fuse) ¼" TRS input (channel 1) MODE switches (stereo, bridge, high-pass filters, limiters) Speakoncompatible outputs Binding Post Terminal Replaceable IEC power connector Overview of MODE switches Stereo Mode EUROLIVE B1520 PRO XENYX SX2442FX L Stereo out Input channel 1 R Input channel 2 EUROPOWER EP4000 (Stereo Mode) Page 3 of 4 EUROPOWER EP4000/EP2000 Accelerated Transient Response delivers the knock-out punch It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That’s called Transient Response and it’s the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound. The legend powers on If you read the reviews of the EP2000 and EP4000’s older brothers, the EP1500 and EP2500, and it’s clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level. Why shell out for a “Brand-X” amp when you can get a BEHRINGER EUROPOWER amp and have money left over for other gear? Parallel Mode EUROLIVE B1520 PRO EUROPOWER EP4000 (Parallel Mode) XENYX SX2442FX Mono Out Input channel 1 Bi-Amp Mode with Subwoofer XENYX SX2442FX Stereo out L 4- pole Speakon 2- pole Speakon 4- pole Speakon 2- pole Speakon R SUPER-X PRO CX2310 Crossover EUROPOWER EP4000 (STEREO MODE) EUROLIVE B1800X PRO EUROLIVE B1220 PRO Page 4 of 4 EUROPOWER EP4000/EP2000 OUTPUT POWER EP4000/EP2000 20 Hz – 20 kHz @ 0.1% THD, both channels driven EP4000 Cooling EP4000 Distortion 8 Ω per channel 4 Ω per channel 2 Ω per channel 550 W 950 W 1250 W EP2000 8 Ω per channel 4 Ω per channel 2 Ω per channel 350 W 500 W 650 W RMS @ 1% THD (sine wave), bridged mode EP4000 8 Ω 4 Ω 1750 W 2400 W EP2000 8 Ω 4 Ω 1000 W 1300 W Peak Power, both channels driven EP4000 8 Ω per channel 4 Ω per channel 2 Ω per channel 750 W 1400 W 2000 W EP2000 8 Ω per channel 4 Ω per channel 2 Ω per channel 400 W 750 W 1000 W Peak Power, bridged mode EP4000 8 Ω 4 Ω <0.02% Distortion <0.01% Load protection Frequency Response At 10 dB below rated output power At -3 dB points 20 Hz – 20kHZ, +0/-dB Output circuit type 5 Hz – 50 kHz EP2000 EP4000/EP2000 Damping Factor Noise >300 @ 8Ω Unweighted, 20 Hz to 20 kHz -100 dB Voltage gain EP4000/EP2000 40X (32 dB) EP4000/EP2000 50X (34 dB) Input sensitivity VRMS (@ 8 Ω) Input Impedance Controls Front Rear Indicators POWER CLIP SIGNAL Connectors Inputs Outputs 2800 W 4000 W 1.15 V (+3.4 dBu) 10 kΩ unbalanced, 20 kΩ balanced EP4000 Output circuit type Class H complementary linear output Class AB complementary linear output POWER SUPPLY EP4000/EP2000 Mains Voltage/Breaker 100-120 V~, 50/60 Hz 15A 220-230 V~, 50/60 Hz 8A EP4000 Power consumption 2600 W EP2000 Power consumption 1600 W EP4000/EP2000 Power switch, gain control (channels 1 and 2) DIP switches (10x) green LED red LED, 1 per channel yellow LED, 1 per channel Balanced XLR and ¼" TRS connectors Touch-proof binding posts and professional speaker connectors EP2000 8 Ω 4 Ω Amplifier protection EP2000 Continuously variable speed fan, back-to-front air flow Full short circuit, open circuit, thermal and HF protection Stable into reactive or mismatched loads Turn-on/off muting, AC coupling Mains Connector Standard IEC receptacle DIMENSIONS/WEIGHT EP4000/EP2000 Dimensions (HxWxD) approx. 3.5 x 19 x 15.8" approx. 88 x 483 x 402 mm EP4000 Weight approx. 36.6 lbs / 16.6 kg EP2000 Weight approx. 34.6 lbs / 15.7 kg Please note these specifications are preliminary and conceptual in nature, and as such are subject to change as product development progresses. This information is supplied for market research purposes only and is not to be made public in any manner. This document is solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner. 1500 W 2000 W For service, support or more information contact the BEHRINGER location nearest you: Europe MUSIC Group Services UK Tel: +44 156 273 2290 Email: CARE@music-group.com USA/Canada MUSIC Group Services NV Inc. Tel: +1 702 800 8290 Email: CARE@music-group.com Japan MUSIC Group Services JP K.K. Tel.: +81 3 6231 0454 Email: CARE@music-group.com Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only. Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands. 985-10000-00383
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Author : BEHRINGER Create Date : 2012:11:05 14:21:36+08:00 Modify Date : 2012:11:05 14:32:54+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Instance ID : uuid:0b87c90d-b1a3-714d-ba42-c0a88503392f Document ID : adobe:docid:indd:74af8ce7-3554-11e0-b1de-f75fec647cef Original Document ID : adobe:docid:indd:74af8ce7-3554-11e0-b1de-f75fec647cef Rendition Class : proof:pdf Derived From Instance ID : 74af8ce6-3554-11e0-b1de-f75fec647cef Derived From Document ID : adobe:docid:indd:74af8ce3-3554-11e0-b1de-f75fec647cef History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:EBA489112A2068118C14BBEB4C397E3D, xmp.iid:ECA489112A2068118C14BBEB4C397E3D, xmp.iid:036A17740720681180839D1EC801F528, xmp.iid:1314365E152068118C14DD0A5BC97917, xmp.iid:DE20CFFD152068118C14DD0A5BC97917, xmp.iid:2C3A4505162068118C14DD0A5BC97917, xmp.iid:65960E08162068118C14DD0A5BC97917, xmp.iid:D65A700E162068118C14DD0A5BC97917, xmp.iid:A3B11218162068118C14DD0A5BC97917, xmp.iid:9320B028162068118C14DD0A5BC97917, xmp.iid:9420B028162068118C14DD0A5BC97917, xmp.iid:0BC86457162068118C14DD0A5BC97917, xmp.iid:AA0DD059162068118C14DD0A5BC97917, xmp.iid:3956965E162068118C14DD0A5BC97917, xmp.iid:3EF14D50172068118C14DD0A5BC97917, xmp.iid:64BF5F63172068118C14DD0A5BC97917, xmp.iid:65BF5F63172068118C14DD0A5BC97917, xmp.iid:F65D286B19206811871FAACC8C33C295, xmp.iid:1A614F66172068118C14D874622F085F History When : 2012:10:10 17:58:47+08:00, 2012:10:10 17:58:47+08:00, 2012:10:12 09:11:30+08:00, 2012:10:12 14:31:11+08:00, 2012:10:12 14:35:38+08:00, 2012:10:12 14:35:51+08:00, 2012:10:12 14:35:56+08:00, 2012:10:12 14:36:06+08:00, 2012:10:12 14:36:23+08:00, 2012:10:12 14:36:50+08:00, 2012:10:12 14:37:59+08:00, 2012:10:12 14:38:09+08:00, 2012:10:12 14:38:13+08:00, 2012:10:12 14:38:21+08:00, 2012:10:12 14:45:06+08:00, 2012:10:12 14:45:38+08:00, 2012:10:12 14:46:26+08:00, 2012:10:15 11:19:53+08:00, 2012:11:05 14:18:34+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2012:11:05 14:32:54+08:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 12418 bytes, use -b option to extract), (Binary data 11293 bytes, use -b option to extract) Doc Change Count : 17 Format : application/pdf Title : EUROPOWER EP4000/EP2000 Creator : BEHRINGER Producer : Adobe PDF Library 9.9 Trapped : False Page Layout : SinglePage Page Count : 4EXIF Metadata provided by EXIF.tools