Behringer Ultra Flanger Uf300 Users Manual ULTRA_FLANGER_UF300

Behringer-Ultra-Flanger-Uf300-Owners-Manual behringer-ultra-flanger-uf300-owners-manual

Behringer UF300 User Manual UF300_P0600_M_EN Behringer - UF300 - User Manual

Behringer UF300 User Manual uf300_p0600_m_en Behringer - UF300 - User Manual

Behringer UF300 User Manual uf300_p0600_m_en Behringer - UF300 - User Manual

: Behringer Behringer-Ultra-Flanger-Uf300-Users-Manual-753216 behringer-ultra-flanger-uf300-users-manual-753216 behringer pdf

Open the PDF directly: View PDF .
Page Count: 3

ULTRA FLANGER UF300

2-Mode Flanger Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA FLANGER UF300.

This high-quality eects pedal delivers two angers in one—from jet-plane thick chorus, vibrato to

short delay eects. Thanks to its high-performance features you can choose between classic and detuned

anger eects with extensive parameter controls for awesome sound shaping.

Originally, the anger eect was generated with two tape recorders running synchronously. The same audio

signal was recorded on both machines. If you put a nger on the left spool of one of the machines, the spool

and the playback speed are slowed down. The generated delay results in phase shifting of the signals.

1. Controls

(1) The MODE switch lets you choose between negative feedback (Mode 1) or positive feedback

(Mode 2) anger modes. Negative feedback means that the delayed signal is inverted before it is

fed back to the original signal. In positive feedback mode the delayed signal is not inverted. In this

case the eect has a more detuned character perfect for vibrato eects.

(2) With the MANUAL control you can adjust the anger delay time. Longer delay times produce a

sharper, more detuned sound, very close to a chorus eect.

(3) Turn up the DEPTH control to achieve a fuller and deeper eect sound.

(4) The RATE control determines the speed of the anger eect.

(5) The RES(onance) control determines the amount of output signal fed back to the anger input to

increase the resonance frequency. That way the anger eect gets more intensive.

(6) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.

(7) Use the footswitch to activate/deactivate the eect.

(8) Use this ¼" TS IN connector to plug in the instrument cable.

(9) The ¼" TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

(1)

(2)

(9)

(6)

(7)

(4)

(3)

(5)

(8)

ULTRA FLANGER UF300

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS

WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,

Tortola, British Virgin Islands

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

◊ The UF300 has no on/o switch. As soon as you insert the jack into the in connector,

the UF300 begins running. When not using the UF300, remove the jack from the in

connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

In

Connector ¼" TS

Impedance 500 kΩ

Out

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

U.K./Australia 240 V~, 50 Hz

China/Korea 220 V~, 50 Hz

Europe 230 V~, 50 Hz

Japan 100 V~, 50 - 60 Hz

Power connector 2 mm DC jack,

negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

FEDERAL COMMUNICATIONS

COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: MUSIC Group Services US Inc.

Address: 18912 North Creek Parkway,

Suite 200 Bothell, WA 98011,

USA

Phone Number: Phone: +1 425 672 0816

ULTRA FLANGER UF300

complies with the FCC rules as mentioned in the followingparagraph:

This equipment has been tested and found to comply with the limits for a ClassB digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the followingmeasures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician forhelp.

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Important information:

Changes or modications to the equipment not expressly approved by MUSIC Group can void

the user’s authority to use the equipment.

ULTRA FLANGER UF300