Behringer Ultratone K1800Fx Users Manual K3000FX/K1800FX/K900FX/K450FX
Behringer-Ultratone-K1800Fx-Users-Manual-751642 behringer-ultratone-k1800fx-users-manual-751642
Behringer-Ultratone-K450Fx-Users-Manual-751646 behringer-ultratone-k450fx-users-manual-751646
Behringer-Ultratone-K900Fx-Users-Manual-751647 behringer-ultratone-k900fx-users-manual-751647
Behringer-Ultratone-K1800Fx-Owners-Manual behringer-ultratone-k1800fx-owners-manual
Behringer-Ultratone-K450Fx-Owners-Manual behringer-ultratone-k450fx-owners-manual
2015-06-29
: Behringer Behringer-Ultratone-K1800Fx-Users-Manual-751643 behringer-ultratone-k1800fx-users-manual-751643 behringer pdf
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
User Manual ULTRATONE K3000FX/K1800FX/K900FX/K450FX Ultra-Flexible 300/180/90/45-Watt 4/3-Channel PA System/ Keyboard Amplifier with FX and FBQ Feedback Detection 2 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Before you get started....................................................... 5 1.1.1 Shipment........................................................................... 5 1.1.2 Initial operation.............................................................. 5 1.1.3 Online registration........................................................ 5 2. Control Elements........................................................ 5 3. Wiring Tips.................................................................. 7 4. Audio Connections..................................................... 8 5. Specifications.............................................................. 8 3 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands LIMITED WARRANTY § 1 Warranty (1) This limited warranty is valid only if you purchased the product from a MUSIC Group Authorized Reseller in the country of purchase. A list of authorized resellers can be found on BEHRINGER’s website behringer.com under “Where to Buy”, or you can contact the MUSIC Group office closest to you. (2) MUSIC Group* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in § 4 below), unless a longer minimum warranty period is mandated by applicable local laws. If the product shows any defects within the specified warranty period and that defect is not excluded under § 4, MUSIC Group shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case MUSIC Group decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product. (3) Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by MUSIC Group. (4) Warranty claims other than those indicated above are expressly excluded. PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE. § 2 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase at behringer.com under “Support” and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! § 3 Return materials authorization (1) To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your MUSIC Group Authorized Reseller not be located in your vicinity, you may contact the MUSIC Group Authorized Fulfiller for your country listed under 4 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the product’s warranty eligibility with the original sales receipt, MUSIC Group will then issue a Return Materials Authorization (“RMA”) number. (2) Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. (3) Shipments without freight prepaid will not be accepted. § 4 Warranty Exclusions (1) This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. (2) This limited warranty does not cover the product if it has been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modification/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, MUSIC Group shall not be held responsible for any cost resulting from such a modification/adaptation. (3) This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided “AS IS” unless expressly provided for in any enclosed software limited warranty. (4) This limited warranty is invalid if the factory-applied serial number has been altered or removed from the product. (5) Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, guitar strings, illuminants and similar parts. (6) Damage/defects caused by the following conditions are not covered by this limited warranty: • improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals; • connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; • damage/defects caused by acts of God/Nature (accident, fire, flood, etc) or any other condition that is beyond the control of MUSIC Group. (7) Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the limited warranty. (8) If an inspection of the product by MUSIC Group shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer. (9) Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyer’s expense. MUSIC Group or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, MUSIC Group will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order. (10) MUSIC Group Authorized Resellers do not sell new products directly in online auctions. Purchases made through an online auction are on a “buyer beware” basis. Online auction confirmations or sales receipts are not accepted for warranty verification and MUSIC Group will not repair or replace any product purchased through an online auction. § 5 Warranty transferability This limited warranty is extended exclusively to the original buyer (customer of authorized reseller) and is not transferable to anyone who may subsequently purchase this product. No other person (reseller, etc.) shall be entitled to give any warranty promise on behalf of MUSIC Group. § 6 Claim for damage Subject only to the operation of mandatory applicable local laws, MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product. § 7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and MUSIC Group. It supersedes all other written or oral communications related to this product. MUSIC Group provides no other warranties for this product. § 8 Other warranty rights and national law (1) This limited warranty does not exclude or limit the buyer’s statutory rights as a consumer in any way. (2) The limited warranty regulations mentioned herein are applicable unless they constitute an infringement of applicable mandatory local laws. (3) This warranty does not detract from the seller’s obligations in regard to any lack of conformity of the product and any hidden defect. § 9 Amendment Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information regarding MUSIC Group’s limited warranty, please see complete details online at behringer.com. * MUSIC Group Macao Commercial Offshore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all MUSIC Group companies 5 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual 1. Introduction ATTENTION! Congratulations! The ULTRATONE is a modern, powerful keyboard amplifier with the qualities of a complete PA system. It combines a whole lot of features, huge power reserves and extreme flexibility in one device, and thanks to its comprehensive connection and extension options—for example Stereo Link facility for true stereo operation and additional Line Out for direct connection to a mixing console—you will always be able to achieve the best possible performance in every situation. ◊ High volume levels can damage your hearing or your headphones. 1.1 Before you get started (1) The LEVEL controls adjust the signal level of channels 1 - 4 (K900FX and K450FX: channels 1 - 3). 1.1.1 Shipment (2) The four FX controls adjust the channel 1 - 4 signal level at the input of the integrated effects processor (K900FX and K450FX: three controls for channels 1 - 3). Your ULTRATONE was carefully packed at the factory, and the packaging was designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred during transit. ◊ If the unit is damaged, please do NOT return it to BEHRINGER. Instead, notify your dealer and the shipping company immediately. Otherwise, claims for damage or replacement may not be honored. ◊ Always use the original packing carton to prevent damage during storage or transport. ◊ Make sure that no children are left unsupervised with the ULTRATONE or its packaging. ◊ Please ensure proper disposal of all packing materials. 1.1.2 Initial operation Be sure that there is enough space around the unit for cooling and please do not place the ULTRATONE on high temperature devices such as radiators etc. to avoid overheating. ◊ Blown fuses must be replaced by fuses of the same type and rating! Please refer to the “Specifications” for details. The mains connection of the ULTRATONE is made by using the enclosed mains cable and a standard IEC receptacle. It meets all of the international safety certification requirements. ◊ Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor from the unit or of the AC power cord. 1.1.3 Online registration Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (http://behringer.com). Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently. Thank you for your cooperation! Please turn down the VOLUME control to zero (all the way to the left) before you power up the amp. Always make sure you use appropriate volume levels. 2. Control Elements (3) The channel 4 signal (K3000FX and K1800FX only) is normally routed just to the PHONES output without effects. This way you can practice without being heard, or you can connect a metronome that you need on headphones but not on speakers. By pressing the TO MAIN button the signal will be additionally routed to the speakers without effects. (4) By pressing the TO LINE OUT button the channel 4 signal will be additionally routed to the LINE OUT output without effects (K3000FX and K1800FX only). ◊ If you press both the TO MAIN and TO LINE button, channel 4 will be equal to channels 1 - 3. The signal will be routed to the speakers and the LINE OUT output including effects. (5) The ULTRATONE is equipped with a 7-band graphic equalizer (K900FX and K450FX: 5-band graphic equalizer). Use the EQ to adapt the sound to the room acoustics. (6) Press the FBQ switch to activate the FBQ Feedback Detection System. The frequencies causing feedback are shown by the brightly lit fader LEDs. Simply lower the level of the respective frequency range until feedback disappears and the LED goes out. (7) The FX display shows the currently selected preset. The SIG LED lights up when the effects processor receives an input signal. When the CLIP LED lights up please reduce the effects input signal by using the respective FX control(s) (2) . (8) Turn the FX control to select an effects preset (preset number starts flashing). Push the control briefly to confirm your selection. (9) The LEVEL control in the master section is used to adjust the main output volume. (10) Turn the FX RET control to add the effect signal to the main mix. (11) Pressing the SHAPE button will add the Shape effect to the main signal. The Shape function on your ULTRATONE provides a revolutionary type of filter that you can use to modify your keyboard sound (K3000FX and K1800FX only). (12) Use the PHONES jack to plug in your headphones. (13) The PHONES LEVEL control adjusts the headphones output level (K3000FX and K1800FX only). (14) Use the POWER switch to switch the ULTRATONE on or off. You should always make sure that the POWER switch is in the “Off” position when initially connecting the unit to the mains. To disconnect the unit from the mains, pull out the main cord plug. When installing the product, ensure that the plug is easily accessible. ◊ Please note: Merely switching the unit off does not mean that it is fully disconnected from the mains. When not using the unit for prolonged periods of time, please unplug the unit’s power cord from the power outlet. 6 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual (15) MAINS CONNECTION. Use the power cord supplied with the unit to connect it to the mains. (21) The SUB OUT connector provides the line-level mono subwoofer signal for connection to the input of a power amp or active subwoofer. (16) FUSE HOLDER/VOLTAGE SELECTOR. Before connecting the unit to the mains, make sure that the voltage setting matches your local voltage. A blown fuse should only be replaced by a fuse of the same type and rating. On some units, the fuse holder can be switched to one of two positions, i.e. 230 V and 120 V. When operating the unit outside Europe at 120 V, a higher fuse rating is required. (22) Connect your footswitch to the FOOT SW jack, so as to activate/deactivate the effects processor. (17) The GROUND LIFT switch disconnects (switch pressed) the ground connection at the LINE OUT output to effectively eliminate hum noise resulting from ground loops (K3000FX and K1800FX only). (18) Use the balanced LINE OUT XLR connectors to feed the audio signal from your ULTRATONE to a mixing console (K3000FX and K1800FX only). The LINE OUT signal is post-EQ. (23) Use the CD IN (K900FX and K450FX: AUX IN) connectors to connect the output of your CD player, tape deck, CD or MD walkman. This way you can play along to music or keyboard tutorial CDs. (24) These are the LINE inputs for channels 1 - 4 on 1/4" TS connectors. For mono input signals please use the L (MONO) connector. (25) Channel 1 is equipped with an additional XLR MIC input. Due to internal +15 V phantom power you can even use condenser microphones. Both XLR and 1/4" TS connectors can be used simultaneously. In this case the LEVEL control of channel 1 adjusts both the level of the LINE and MIC signal. (19) These are the LINE OUT outputs on 1/4" TS connectors (K900FX and K450FX: one 1/4" TS connector). ◊ Both XLR and 1/4" TS LINE OUT connectors can be used simultaneously. (20) For stereo operation the ULTRATONE features a STEREO LINK facility. You can connect the OUT of the ULTRATONE to the LINK IN of another keyboard amp that serves as slave to achieve true stereo sound. When using the ULTRATONE as slave, connect the LINK OUT of the master amp to the IN (K3000FX and K1800FX only). (2) (4) (1) (3) (8) (5) (6) (7) (10) (12) (14) (9) (11) (13) Fig. 2.1: Front panel control elements (K3000FX and K1800FX) (16) (18) (15) (17) Fig. 2.2: Rear panel control elements (K3000FX and K1800FX) (19) (20) (21) (26) (22) (24) (23) (25) 7 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual (2) (8) (5) (1) (6) (10) (7) (12) (14) (9) Fig. 2.3: Front panel control elements (K900FX and K450FX) (15) (16) (22) (21) (19) (23) (24) (25) Fig. 2.4: Rear panel control elements (K900FX and K450FX) 3. Wiring Tips B1520 PRO EP2000 Keyboard 2 x Keyboard Main Outputs CD Player Line In XM8500 Footswitch X2222FX Mic In Line In Drum Computer XM8500 Drum Computer Aux In Phones HPS3000 Line In Mic In 1 Line In 3 Line Out Line In 2 Footswitch Line In 4 Sub Out EP2000 BEHRINGER ULTRATONE K900FX Fig. 3.1: Example of a setup using the ULTRATONE BEHRINGER ULTRATONE K3000FX Fig. 3.2: Live setup B1800X PRO 8 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual Fig. 3.1 shows how to connect your keyboard, a drum machine and a microphone to the ULTRATONE. Additionally a CD player is connected to the AUX IN input to feed in a playback. With the footswitch you can activate/deactivate the internal effects processor. Fig. 3.2 shows a recommended setup for amplifying the sound of your ULTRATONE using a sound reinforcement system of any size. This way, you can also use your amp for playing live or for rehearsals with your band. 4. Audio Connections The ULTRATONE features 1/4" connectors on inputs and outputs plus additional balanced XLR connectors for channel 1 input and Line Out outputs (K3000FX and K1800FX). More detailed information can be found in chapter 5, “Specifications.” Balanced use with XLR connectors 2 1 3 input 1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) 1 2 3 output For unbalanced use, pin 1 and pin 3 have to be bridged Unbalanced ¼" TS connector strain relief clamp Fig. 4.3: XLR connectors sleeve tip tip tip sleeve sleeve (ground/shield) tip (signal) Fig. 4.1: 1/4" TS connector shield Fig. 4.4: RCA cable (for CD IN/AUX IN connection) 5. Specifications Audio Inputs Line In 1 - 4 ¼" TRS headphones connector strain relief clamp sleeve ring tip Input impedance Stereo Link In Input impedance CD In/Aux In sleeve ground/shield ring right signal tip left signal Fig. 4.2: 1/4" TRS connector sleeve Input impedance Mic In 1 Input impedance 1/4" TS connector approx. 30 kΩ balanced 1/4" TS connector approx. 20 kΩ unbalanced RCA connector approx. 20 kΩ unbalanced XLR connector approx. 2 kΩ balanced Audio Outputs Headphones connector 1/4" TRS connector Line Out 1/4" TS and XLR connector Output impedance Stereo Link Out Output impedance Sub Out Output impedance 1/4" TS connector: approx.150 Ω unbalanced XLR connector: approx. 300 Ω balanced 1/4" TS connector approx. 150 Ω unbalanced 1/4" TS connector approx. 150 Ω unbalanced 9 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual Equalizer Type Power Supply Graphic EQ with FBQ Feedback Detection Frequency range K1800FX/K3000FX 63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/ 6.3 kHz/12 kHz K450FX/K900FX 63 Hz/250 Hz/1 kHz/3.5 kHz/12 kHz Bandwidth 2/3-oct. Control range +12 to -12 dB USA/Canada 120 V~, 60 Hz U.K./Australia 230 V~, 50 Hz Europe 230 V~, 50 Hz China/Korea 220 V~, 50 Hz Japan 100 V~, 50 - 60 Hz General export model 120/230 V~, 50 - 60 Hz Power consumption Digital Effects Processor Converters 24-bit sigma-delta, 64/128-times oversampling Sampling rate 40 kHz System Specifications Power amp output K3000FX approx. 350 Watts K1800FX approx. 290 Watts K900FX approx. 150 Watts K450FX approx. 75 Watts Fuse K3000FX 300 Watts K1800FX 180 Watts K900FX 90 Watts K450FX 45 Watts Loudspeaker Type K3000FX 15'' BUGERA woofer and custom-made 1'' driver K1800FX 12'' BUGERA woofer and custom-made 1'' driver K900FX 12'' BUGERA woofer and custom-made 1'' driver K450FX 10'' BUGERA speaker Input impedance Mains voltage 4Ω K3000FX 100 - 120 V~: 6.3 A H 250 V 220 - 240 V~: 3.15 A H 250 V K1800FX 100 - 120 V~: 6.3 A H 250 V 220 - 240 V~: 3.15 A H 250 V K900FX 100 - 120 V~: 3.5 A H 250 V 220 - 240 V~: 1.6 A H 250 V K450FX 100 - 120 V~: 2.5 A H 250 V 220 - 240 V~: 1.25 A H 250 V Mains connection Standard IEC receptacle Dimensions/Weight Dimensions K3000FX approx. 20 7/8 x 23 1/2 x 16" approx. 530 x 597 x 406 mm K1800FX approx. 16 7/8 x 19 3/8 x 11 3/4" approx. 429 x 492 x 299 mm K900FX approx. 16 7/8 x 19 3/8 x 11 3/4" approx. 429 x 492 x 299 mm K450FX approx. 16 1/2 x 17 3/8 x 11 3/4" approx. 419 x 441 x 299 mm Weight K3000FX approx. 65.04 lbs / 29.5 kg K1800FX approx. 44.32 lbs / 20.1 kg K900FX approx. 41.45 lbs / 18.8 kg K450FX approx. 32.19 lbs / 14.6 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown. 10 ULTRATONE K3000FX/K1800FX/K900FX/K450FX User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION ULTRATONE K3000FX/K1800FX/K900FX/K450FX Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 ULTRATONE K3000FX/K1800FX/K900FX/K450FX complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user’s authority to use the equipment. We Hear You
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Author : Behringer Create Date : 2012:02:07 17:11:45+08:00 Modify Date : 2012:02:09 17:16:50+08:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Instance ID : uuid:12eea1db-73d2-124f-8b3d-cb17e6a9f0b8 Original Document ID : adobe:docid:indd:fc5c23c9-a85e-11df-9945-f5d144549ebf Document ID : xmp.did:A45E8277232068118083BCF182B2FDD4 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:89027A780A2068118083BCF182B2FDD4 Derived From Document ID : xmp.did:37FEB0A14320681188C6B1E58B9DFDAE Derived From Original Document ID: adobe:docid:indd:fc5c23c9-a85e-11df-9945-f5d144549ebf Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:4C4CB7A94620681188C6B55A9195E590, xmp.iid:4D4CB7A94620681188C6B55A9195E590, xmp.iid:45EF7402082068118083BC379147CE7A, xmp.iid:B4ECFF65192068118083A015CFDE6BC4, xmp.iid:2E3A96F24C2068118083A015CFDE6BC4, xmp.iid:C469A99F4A2068118EF19D55A2DABA9D, xmp.iid:B5F74FF02F20681180838EA8B7A438AD, xmp.iid:94B2D8693020681180838EA8B7A438AD, xmp.iid:42BDEF81142068118083F9617A357E73, xmp.iid:C5A16299142068118083F9617A357E73, xmp.iid:4EE39FDC192068118083B0A3E132DCEB, xmp.iid:6E3285E5242068118083B0A3E132DCEB, xmp.iid:EA463E31302068118083B0A3E132DCEB, xmp.iid:97A1FD38302068118083B0A3E132DCEB, xmp.iid:F04F4946302068118083B0A3E132DCEB, xmp.iid:F14F4946302068118083B0A3E132DCEB, xmp.iid:F24F4946302068118083B0A3E132DCEB, xmp.iid:F34F4946302068118083B0A3E132DCEB, xmp.iid:F44F4946302068118083B0A3E132DCEB, xmp.iid:1E84607C3C2068118083B0A3E132DCEB, xmp.iid:F93F0A833C2068118083B0A3E132DCEB, xmp.iid:1CEDA62F372068118083E0F1855C43CC, xmp.iid:1DEDA62F372068118083E0F1855C43CC, xmp.iid:1EEDA62F372068118083E0F1855C43CC, xmp.iid:07146742372068118083E0F1855C43CC, xmp.iid:93342074072068118083982844BF7CBF, xmp.iid:94342074072068118083982844BF7CBF, xmp.iid:62415DEC4320681188C6B1E58B9DFDAE, xmp.iid:63415DEC4320681188C6B1E58B9DFDAE, xmp.iid:95B7EC5D3F2068118083E9490FF27F21, xmp.iid:96B7EC5D3F2068118083E9490FF27F21, xmp.iid:7F39DF020C206811871F9FCF7AFDE4A7, xmp.iid:8039DF020C206811871F9FCF7AFDE4A7, xmp.iid:981FF3EC382068118083D942D75AB66C, xmp.iid:991FF3EC382068118083D942D75AB66C, xmp.iid:0F5ACB480D2068118083AF431BBF6871, xmp.iid:105ACB480D2068118083AF431BBF6871, xmp.iid:1BFCC38D36206811822ACAC747C06E67, xmp.iid:7C55E0CB4C206811822ACAC747C06E67, xmp.iid:89027A780A2068118083BCF182B2FDD4, xmp.iid:A45E8277232068118083BCF182B2FDD4, xmp.iid:711368B6232068118083BCF182B2FDD4, xmp.iid:721368B6232068118083BCF182B2FDD4, xmp.iid:140A9F10242068118083BCF182B2FDD4, xmp.iid:A357C718242068118083BCF182B2FDD4, xmp.iid:6740AE33242068118083BCF182B2FDD4, xmp.iid:9A21567D242068118083BCF182B2FDD4, xmp.iid:530463EE242068118083BCF182B2FDD4, xmp.iid:DB5F89BA2A2068118083BCF182B2FDD4, xmp.iid:1E0E60A13F2068118083BCF182B2FDD4, xmp.iid:C5C4C4D53F2068118083BCF182B2FDD4, xmp.iid:C446F349402068118083BCF182B2FDD4, xmp.iid:63D51F78402068118083BCF182B2FDD4, xmp.iid:7EBF6F83402068118083BCF182B2FDD4, xmp.iid:721B118D402068118083BCF182B2FDD4, xmp.iid:01E770A6402068118083BCF182B2FDD4, xmp.iid:34B9A981412068118083BCF182B2FDD4, xmp.iid:F3567AC8412068118083BCF182B2FDD4, xmp.iid:D67413DA412068118083BCF182B2FDD4, xmp.iid:0183E443422068118083BCF182B2FDD4, xmp.iid:1AF85347422068118083BCF182B2FDD4, xmp.iid:1BF85347422068118083BCF182B2FDD4, xmp.iid:1052DF84442068118083BCF182B2FDD4, xmp.iid:1152DF84442068118083BCF182B2FDD4, xmp.iid:93A527740720681188C6B30ADB4CF538, xmp.iid:911059AF1920681188C6B30ADB4CF538, xmp.iid:5CC9053C1820681188C6EF3399EE22EC, xmp.iid:6542044E4220681188C6EF3399EE22EC, xmp.iid:676AE0A04220681188C6EF3399EE22EC, xmp.iid:4E3457B04220681188C6EF3399EE22EC, xmp.iid:45AB03B44220681188C6EF3399EE22EC, xmp.iid:9BA388BE4220681188C6EF3399EE22EC, xmp.iid:0D7396CF4220681188C6EF3399EE22EC History When : 2011:05:30 17:21:44+08:00, 2011:05:30 17:21:44+08:00, 2011:06:01 11:21:03+08:00, 2011:06:02 11:18:07+08:00, 2011:06:02 17:27:08+08:00, 2011:06:10 17:01:17+08:00, 2011:07:04 15:15:45+08:00, 2011:07:04 15:15:45+08:00, 2011:07:04 17:47:33+08:00, 2011:07:04 17:48:12+08:00, 2011:07:05 11:02:37+08:00, 2011:07:05 12:21:38+08:00, 2011:07:05 13:42:30+08:00, 2011:07:05 13:42:43+08:00, 2011:07:05 13:43:05+08:00, 2011:07:05 13:43:08+08:00, 2011:07:05 13:43:15+08:00, 2011:07:05 13:45:01+08:00, 2011:07:05 13:47:07+08:00, 2011:07:05 15:10:41+08:00, 2011:07:05 15:10:41+08:00, 2011:07:05 15:30:22+08:00, 2011:07:05 15:30:22+08:00, 2011:07:05 15:30:54+08:00, 2011:07:05 15:30:54+08:00, 2011:07:06 08:52:54+08:00, 2011:07:06 08:52:54+08:00, 2011:08:16 17:48:40+08:00, 2011:08:16 17:48:40+08:00, 2011:08:19 15:52:23+08:00, 2011:08:19 15:52:23+08:00, 2011:08:22 10:44:44+08:00, 2011:08:22 10:44:44+08:00, 2011:09:07 14:57:45+08:00, 2011:09:07 14:57:45+08:00, 2011:10:27 10:10:22+08:00, 2011:10:27 10:10:22+08:00, 2012:01:02 15:10:29+08:00, 2012:01:02 17:49:42+08:00, 2012:02:02 14:01:45+08:00, 2012:02:02 14:01:45+08:00, 2012:02:02 14:03:31+08:00, 2012:02:02 14:03:38+08:00, 2012:02:02 14:06:02+08:00, 2012:02:02 14:06:16+08:00, 2012:02:02 14:07:01+08:00, 2012:02:02 14:09:05+08:00, 2012:02:02 14:12:14+08:00, 2012:02:02 14:53:44+08:00, 2012:02:02 17:23:21+08:00, 2012:02:02 17:24:49+08:00, 2012:02:02 17:28:04+08:00, 2012:02:02 17:29:22+08:00, 2012:02:02 17:29:41+08:00, 2012:02:02 17:29:57+08:00, 2012:02:02 17:30:39+08:00, 2012:02:02 17:36:47+08:00, 2012:02:02 17:38:46+08:00, 2012:02:02 17:39:15+08:00, 2012:02:02 17:42:13+08:00, 2012:02:02 17:42:19+08:00, 2012:02:02 17:42:42+08:00, 2012:02:02 17:58:21+08:00, 2012:02:02 17:58:50+08:00, 2012:02:03 12:18:16+08:00, 2012:02:03 14:29:53+08:00, 2012:02:07 12:06:52+08:00, 2012:02:07 17:08:01+08:00, 2012:02:07 17:10:20+08:00, 2012:02:07 17:10:46+08:00, 2012:02:07 17:10:52+08:00, 2012:02:07 17:11:09+08:00, 2012:02:07 17:11:38+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2012:02:09 17:16:50+08:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 7434 bytes, use -b option to extract), (Binary data 4667 bytes, use -b option to extract) Doc Change Count : 245 Format : application/pdf Title : ULTRATONE K3000FX/K1800FX/K900FX/K450FX Creator : Behringer Producer : Adobe PDF Library 9.9 Trapped : False Page Layout : SinglePage Page Mode : UseOutlines Page Count : 11EXIF Metadata provided by EXIF.tools