Beijing MADV Technology QJXJ01FJ Mi Sphere Camera User Manual

Beijing MADV Technology Co. Ltd Mi Sphere Camera Users Manual

Users Manual

Mi Sphere Camera     User ManualPlease read the manual before using the product.Product OverviewPackage Contents: Mi Sphere Camera×1,  Tripod×1, Power Cable×1, User Manual×1Product: Mi Sphere CameraModel:QJXJ01FJ Dimensions:78.00×67.40×24.03mm               Camera Weight:108.3gInput:5V       2A                      Operating Temperature:-10 — 45℃Focal Length:1.43Aperture:F2.0Battery Capacity:1600mAhIP Rating:IP67              Maximum Photo Resolution:6912×3456Maximum Video Resolution:3456×1728Wireless Connections: Wi-Fi IEEE 802.11 b/g/n 2.4GHz ; Bluetooth 4.0Memory Storage: MicroSD CardCompatible With: Android5.0/iOS8 and aboveCMIIT ID:2016DP6594Power Adaptor Parameters:Input:100-240~50/60HzOutput: 5V       2A/9V       2A/12V       1.5A              Support QC2.0, USB-A ports       Specifications Declaration of conformityRequirements  and  other  relevant  provisions  of  Directive  1999/5/EC.  The  full  text  of  the  EU  declaration  of  conformity  is  available  at The  following  internet  address:  http://www.madv360.com/ CE SAR:RF exposure (SAR) :  The device can safely be used with a distance of 5mm to the human body.FCC ID:2AJ2LQJXJ01FJThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment      and receiver. —Connect the equipment into an outlet on a circuit     different from that to which the receiver is      connected. —Consult the dealer or an experienced radio/TV      technician for help.FCCSARFCC Radiation Exposure Statement This device complies with FCC SAR exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  Hereby,  [Beijing MadV Technology Co. , Ltd]  declares  that  this  device  is  in  compliance  with  the  essential Principal:Xiaomi Communication Co., LtdManufacturer:Beijing MADV Technology Co., LtdAddress:No.80, Floor 4,  building17, Yard 30, Shixingdajie,                     Shijingshan District ,Beijing(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution!  Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This symbol means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reachs its end of life, take it to a collection point designated by localauthorities. Some collection points accept productsfor free. The separate collection and recycling of your product at the time of disposal will help conserve natural resourses and ensure that it is recycled in a manner that protects human health and the environment.
Parts Names Functions 1.   Turn On/Off        Turn On: Press the Power/Mode Button. The          Power Status Indicator will flash 3 times and        display current power status, and the current        mode indicator will be on.       Turn Off: Press and hold the Power/Mode Button.        The Power Status Indicator will flash 3 times and        turn off along with other indicators.2.   Switch between still capturing and video        recording modes       Press the Power/Mode Button to switch between       still capturing and video recording modes. (The        factory default is the video recording mode)3.   Video Recording   When recording videos, the Video Recording       Indicator (blue) is on. Press Shutter/Enter Button        to start shooting, and the Video Recording        Indicator (red) will flash slowly; Press        Shutter/Enter Button again to stop shooting, and   the Video Recording Indicator will resume blue after 3 red flashes.4. Short Videos       When recording videos, press and hold        Shutter/Enter Button to start taking short videos,        and the Video Recording Indicator (red) will        slowly flash. The shooting automatically stops 10        seconds later. The shooting length can be        adjusted via APP.5. Still Capturing        When taking photos, the Still Capturing Indicator       (blue) is on. The Still Capturing Indicator flashes        everytime you press the Shutter/Enter Button.6. Wi-Fi Password Reset       Press and hold the Wi-Fi Button for 3 seconds to        clear the password.  7. Battery Power Indicator         NamePasswordSet up Wi-FiPlease set up Wi-Fi according to              below instructionsSaveConnect to Wi-Fi Click "Connect to Wi-Fi " to connectConnect to Wi-FiConnecting to a Mobile Device1. Download and install "Mi Sphere Camera".2. Turn on Wi-Fi by pressing the Wi-Fi Button, and      the Wi-Fi Indicator slowly flashes blue; The blue      indicator flashes quickly while paring, and remian     blue when paring completed.Download The AppScan the below QR code or go to App store to download "Mi Sphere Camera".Video Recording       IndicatorTripod Lock HoleCharging ContactsTripod Mount HoleBuzzer HoleStill Capturing IndicatorLensPower Status IndicatorMicWi-Fi ButtonShutter/Enter      ButtonMicWi-Fi Status IndicatorMicroSD Card Slot/USB portWi-Fi Status    IndicatorAndroidiOSa. Not Charging Lower than battery alarm: the Power Status Indicator slowly flashes red.Higher than battery alarm: the Power Status Indicator remain turned off.b. ChargingCharging: the Power Status Indicator (red) is on.Charging Completed: the Power Status Indicator (blue) is on.8. Standby Mode       When left unused for more than 120 seconds,        the camera enters standby mode, and the Power        Status Indicator (blue) starts breathing. Press any        button to resume.9. Remote Shooting       Mi Sphere Camera Remote (sold separately)        enables shooting even when you are 30 meters        away from the camera

Navigation menu