Beijing Roborock Technology RSW01 F89ETSM13-W2 User Manual rev 1

Download:
Mirror Download [FCC.gov]
Document ID	3902279
Application ID	v7UN8Hum86bX+23A8mVUQg==
Document Description	User manual rev.1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.44kB (968051 bits)
Date Submitted	2018-06-26 00:00:00
Date Available	2018-06-27 00:00:00
Creation Date	2018-06-26 14:25:39
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-06-26 15:48:03
Document Title	User manual rev.1
Document Creator	Microsoft® Word 2013
Document Author:	Zhiguang Zhou

Ruby S F89ETSM13-W2 SPEC
Ruby S

石头世纪科技有限公司 内部文档 未经允许请勿转发
Ruby S F89ETSM13-W2 SPEC
Content
1. General Description ...................................................................................................................................3
2. Product Model Information ....................................................................................................................3
3. WIFI Specification .......................................................................................................................................3
3.1 WIFI feature ...........................................................................................................................................3
3.2 WIFI RF Performance .........................................................................................................................4
3.3 Block Diagram ......................................................................................................................................5
3.4 Dimension ..............................................................................................................................................5
3.5 PIN Assignment ...................................................................................................................................6
3.6 Schematic ...............................................................................................................................................7
4. Antenna Specification ...............................................................................................................................8
4.1 Antenna List ..........................................................................................................................................8
4.2 Wireless LAN antenna matching circuit ......................................................................................9
4.3 Antenna design requirements: .......................................................................................................9
5. FCC and IC Warning ................................................................................................................................ 10
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
1. General Description
The F89ETSM13-W2 is a highly integrated single-chip 802.11n Wireless LAN (WLAN)
network SDIO interface (SDIO 1.1/ 2.0/ 3.0 compliant) controller. It is a WLAN MAC, a
1T1R capable WLAN baseband, and WLAN RF in a single chip. It provides a complete
solution for a high throughput performance integrated wireless LAN device.
2. Product Model Information
Model Number
F89ETSM13-W2
FCC ID
2AN2O-RSW01
IC
23317-RSW01
3. WIFI Specification
3.1 WIFI feature
1)
Operate at ISM frequency Band (2.4GHz);
2)
IEEE standards support, 802.11 b/g/n,;
3)
Enterprise level security supporting: WEP 64bit&128bit, WPA, WPA2, WPA2PSK and IEEE802.11i;
4)
IEEE 802.11e QoS Enhancement(WMM);
5)
Support 1 transmission and 1 receiving, transmission rate can up to 150Mbps
(Physical Rate) in downstream and upstream.
When it operating in the 2.4GHz ISM band (2.412-2.462GHz,11 Channels).it support
wireless WLAN standards include 802.11b/g/n, communication has 11 channels,
whose center frequencies are
CH1: 2412MHz, CH2: 2417MHz, CH3: 2422MHz, CH4: 2427MHz, CH5: 2432MHz,
CH6: 2437MHz, CH7: 2442MHz, CH8: 2447MHz, CH9: 2452MHz, CH10: 2457MHz,
CH11:2462MHz respectively.
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
3.2 WIFI RF Performance
Feature
Description
Standard
IEEE 802.11 b/g/n
802.11 b: 11, 5.5, 2, 1 Mbps
802.11 /g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rate
802.11 n: MCS 0 to 7 for HT20MHz：65 Mbps
MCS 0 to 7 for HT40MHz：150 Mbps
IEEE 802.11b mode: CCK, DQPSK, DBPSK
Modulation mode
IEEE 802.11g mode: 64QAM, 16QAM, QPSK, BPSK
IEEE 802.11n mode : 64QAM, 16QAM, QPSK, BPSK
Ad-hoc Mode(Peer-to-Peer)
Network Architecture
Infrastructure mode
Scatter Net
Frequency Range
2.4GHz band: 2.412-2.462GHz
802.11 b: 18dBm;
Transmit Output
Power
(Tolerance: +/-1dBm)
802.11 g: 14dBm;
802.11 n (2.4GHz):
14dBm：20MHz;
13dBm：40MHz;
Antenna Type
石头世纪科技有限公司 内部文档
1x1 Diversity
Ruby S F89ETSM13-W2 SPEC
3.3 Block Diagram
3.3V
Antenna
SDIO/GSPI
PA
2.4GHz
HOST Interface
CLK
3.4 Dimension
Unit ±0.15mm
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
3.5 PIN Assignment
Pin #
Name
Description
GND
GND
RF
RF OUTPUT
GND
GND
4~8
NC
NC
VBAT
3.3 or 4.2V Optional
10
NC
NC
11
NC
NC
12
WL_REG_ON
WL_REG_ON
13
WL_HOST_WAKE
WAKE UP
14
SDIO_DATA_2
SDIO_D2
15
SDIO_DATA_3
SDIO_D3
16
SDIO_DATA_CMD
SDIO_CMD
17
SDIO_DATA_CLK
SDIO_CLK
18
SDIO_DATA_D0
SDIO_D0
19
SDIO_DATA_D1
SDIO_D1
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
20
GND
GND
21
NC
NC
22
VDIO
1.8~3.3V
23~30
NC
NC
31
GND
GND
32
NC
NC
33
GND
GND
34~35
NC
NC
36
GND
GND
37~40
NC
NC
41
GND
GND
42~44
NC
NC
3.6 Schematic
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
4. Antenna Specification
4.1 Antenna List
No.
Model
Type
Band(s)
Max Peak Gain(dBi)
PCB
PCB antenna
2.4GHz - 2.5GHz
3.7
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
4.2 Wireless LAN antenna matching circuit
4.3 Antenna design requirements:
1)
RF-line need 50Ω single line impedance；
2)
Antenna is 2.4G WiFi Frequency band MIFA type Board antenna
3)
Antenna length, width, shape(s) as follows，Company：mm；
石头世纪科技有限公司 内部文档
Ruby S F89ETSM13-W2 SPEC
4)
PCB thickness is 1.5mm，Copper-Layer 6，Antenna is Layer1；
5)
Antenna put on the edge of the pcb，Clearance around and below；
5. FCC and IC Warning
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
石头世纪科技有限公司 内部文档
10
Ruby S F89ETSM13-W2 SPEC
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more
should be maintained between the antenna of this device and persons during device
operation. To ensure compliance, operations at closer than this distance is not
recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse
y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce
que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’
antenne. La FCC des éltats-unis stipule que cet appareil doit être en tout temps
éloigné d’au moins 20 cm des personnes pendant son functionnement.
Limited by local law regulations, version for North America does not have region
selection option.
This device is intended for OEM integrators only. Please see the full grant of
equipment document for restrictions.
If the FCC ID of this module is not visible when it is installed inside another device,
then the outside of the device into which the module is installed must be label with
“Contains FCC ID: 2AN2O-RSW01 and IC: 23317-RSW01”.
石头世纪科技有限公司 内部文档
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Zhiguang Zhou
Create Date                     : 2018:06:26 14:25:39+08:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2018:06:26 15:48:03+08:00
Metadata Date                   : 2018:06:26 15:48:03+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:a7526d25-a2fc-40b8-b8d5-a6184546c5e2
Instance ID                     : uuid:2e4fc44d-b703-4a23-8f5d-e51f0b2cb64b
Page Count                      : 11
Author                          : Zhiguang Zhou

EXIF Metadata provided by EXIF.tools