Beijing Smartmi Electronic Technology AC-M3-CA Mi Air Purifier Pro User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3515150
Application ID	fEyw0m4YkMZsxs/ya+o1UA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	255.45kB (3193157 bits)
Date Submitted	2017-08-17 00:00:00
Date Available	2017-08-17 00:00:00
Creation Date	2017-06-21 17:31:12
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-06-22 14:48:12
Document Title	Users Manual
Document Creator	Adobe Illustrator CC 2015 (Macintosh)

小米生态链产品包装图纸
840mm
Product Introduction
Use
Use
Correct position
Plug into a power supply
For best performance, keep the air inlets a certain
distance away from walls or other obstructions.
1 Open the filter cabinet
Gently lift the handle on the
rear cover to open the filter
cabinet. Make sure that the
filter is in locked status.
Fan grille
Screen on/off and
filter reset button
Light sensor
Power/Mode button
Screen display
Connect to mobile app
Replace filter
Press to turn on the unit or to switch the
operating mode. Press and hold for 2
seconds to turn off the unit.
Information displayed on the unit's front screen
In the app store, search "Mi Home" or scan the following QR
code to download Mi Home. Open the app, access "My
Device", and add "Mi Air Purifier Pro" from the upper right
corner. The device can be found in "Smart Device List".
Replace the filter every 3 to 6 months.
When it is detected that the filter service
life is running out, the display indicates
the remaining service life of the filter
each time when the unit starts up.
025
2 Take out the power cord
PM2.5
and can interconnect with other Xiaomi
Air quality indicator
Air quality indicated by green, orange and red lights
AQI 0 - 75
Green
AQI 76 - 150
Orange
Red
AQI > 150
Display
Filter life remaining
10%
This product has been incorporated into the
Mi Smart Home kit. It supports MIUI OS,
25℃ 60%
Dust sensor
Power/Mode button
材
质
工
艺
要
求
Use
Take out the power cord
and close the rear cover.
Temperature/Humidity sensor
150mm
材质：太空梭哑粉105g
smart home products.
For device control and purchase of more
smart products, please log in to "Mi Home".
For filter replacement, refer to the "Filter
replacement" label at the back of the
filter cabinet door.
Please make sure to turn off the air
purifier and disconnect power before
performing the preceding operations.
>10cm
Screen on/off button
>20cm
3 Plug into a power supply
Filter cabinet cover
Connect the power cord to
the power port at the bottom
of the unit, and then plug
into a power supply
>20cm
Temperature
Wi-Fi indicator
Operating mode
Auto: Automatically switches modes
according to indoor air quality conditions
Sleep: Low-noise mode for a quiet night's sleep
Note: Doors and windows should be kept closed during the
operation for more efficient air purification.
Favorite: Adjust and save purification mode
by setting usage area via app
Power cord port
Front
Reset Wi-Fi module
Humidity
Press the screen on/off button on the back
of the unit to turn the screen on/off.
If you are unable to
connect your phone to
the air purifier, press and
hold the mode and light
button simultaneously
for 5 seconds. A
beeping sound indicates
that Wi-Fi has been
successfully reset.
After replacement, turn on the unit.
Press and hold the rear button for 6
seconds until you hear a beep sound.
This indicates successful filter
replacement, and the filter replacement
timer is reset.
Note : Units with the RFID label at the
bottom do not require reset of filter
replacement timer.
Note : When the filter reaches saturation absorption of harmful gases, there may be
Rear
工艺：单色印刷、风琴3折
印刷要求：色相正确、印迹牢固、套印准确、
各色套印不露杂色，套印误差≤ 0.1mm
an odor. Please place the filter in a sunny and ventilated place to eliminate odors.
Maintenance
Notes
Hazardous substances statement
Please make sure to turn off the air purifier and disconnect power before
Hazardous substances or elements
performing the following operations.
Part name
Pb
Hg
Cd
Cr(VI)
PBB
Outer Casing
PBDE
Carrying
·Turn off the unit and disconnect power before moving.
Installing
·The unit will not turn on if the rear cover is not properly installed.
·Keep the air inlets at least 20 cm away from walls or other obstacles.
Warnings
·Excessive bending, folding or twisting of the AC power cord may cause damage or expose the cable core.
·Always unplug by holding the power plug, not by pulling by the cord.
·Use only with appropriate AC power sockets.
·Do not use the power cord with any other equipment.
AC power cord
To avoid fire, electric shock or other damages, use the power cord and electric outlets as instructed below:
·Use only with the provided power cord that matches the AC power socket.
·Use a Xiaomi power cord only.
·Before servicing or moving the air purifier, disconnect AC power cord from AC power socket.
Circuit board
Accessories
This table is prepared in accordance with SJ/T 11364.
：Indicates that the amount of the hazardous substances in all homogenous materials used in the component is within the amount permitted by the GB/T 26572
standard.
：Indicates that the amount of the hazardous substances in at least one of the homogenous materials used in the component exceeds the amount permitted by the
GB/T 26572 standard.
Clean the filter cabinet
Clean dust sensor
For best performance, use a vacuum cleaner or soft
cloth to remove dust clinging to air inlets or cabinet
walls.
As shown in the figure, use a non-sharp tool to open
the dust sensor's rear cover, and use an air gun or
blower to clean the filter and sens
Note: Do not use hot blast.
Specifications
Product name
Mi Air Purifier Pro
Rated voltage
100-240V~
CADR (Particle)
500m3/h
Model
AC-M3-CA
Rated AC frequency
50/60Hz
CADR (Formaldehyde)
70m3/h
Dimensions
260 260 735mm
Rated power
66W
CCM (Particle)
P2
Net weight
approx. 8.0 kg
Noise
69dB(A)
Works best within*
35m2-60m2
Gross weight
approx. 9.7 kg
Cleaning efficiency
High
Wi-Fi module
Wi-Fi IEEE 802.11 b/g/n 2.4GHz
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body
In use
·In the event of unusual sounds, undesirable odors, high temperature, irregular fan spin or other irregularities, stop using
immediately.
·Do not insert fingers or other foreign objects into any shield, moving part, or air inlet/outlet.
·Keep hair and fabric away from the unit to avoid blocking or being caught in inlets or outlets.
·Do not sit on, lean on or tilt the unit.
·Ensure proper ventilation when using alongside devices using flammable fuel to prevent carbon monoxide poisoning.
Restrictions
To avoid fire, electric shock or other damages, do not use in following circumstances:
·Surfaces where the unit may tilt or otherwise cannot be stably placed.
·Environments that are extremely hot or wet, or exposed to water, for example bathrooms.
Mi Air Purifier Pro User Manual
Manufacturer : Beijing Zhimi Electronic Technology Limited
纹
理
方
向
Mi Air Purifier Pro User Manual
Keep this user manual in a safe place and read carefully before use
version1.0
Customer Service : www.mi.com/service
Address : 11-1102, Office Building Rainbow City, NO.68 Qinghe Mid-Street, Haidian District, Beijing
* Calculated based on standard Q/BJZMK0001-2015
使用说明书
V1.3
2017.02.17
专色：PANTONE Cool Gray 9C
龙翔
字体:
字号：
历史
版本
版本号：
修改点：
修改人：
商品ID
SKU编码
14270
FJY4011CN
版本号：
修改点：
修改人：
商品名称
69码
米家空气净化器Pro
6970244522153
版本号：
修改点：
修改人：
产品型号
AC-M3-CA
版本号：
修改点：
修改人：
比例
1:1
版本号：
修改点：
修改人：
单位
mm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Format                          : application/pdf
Title                           : 米家空气净化器Pro-使用说明书-20161219
Metadata Date                   : 2017:06:22 14:48:12+08:00
Modify Date                     : 2017:06:22 14:48:12+08:00
Create Date                     : 2017:06:21 17:31:12+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13740 bytes, use -b option to extract)
Instance ID                     : uuid:955f07a2-c08b-ba4e-81b1-d52b51bc733e
Document ID                     : xmp.did:8e563eae-4d81-4e19-8758-e18cf7d255cb
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:dac3a298-ce20-1541-b4e5-3813fc3d4c9b
Derived From Document ID        : xmp.did:9e3a4dab-15de-4b1d-aa32-227f46bf008e
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:37a7d977-7cd7-4389-acfb-f799ff680de1, xmp.iid:8e563eae-4d81-4e19-8758-e18cf7d255cb
History When                    : 2016:09:08 19:38:25+08:00, 2017:06:21 17:31:12+08:00
History Software Agent          : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2015 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 1532.219817
Max Page Size H                 : 1009.072768
Max Page Size Unit              : Millimeters
Font Name                       : HelveticaNeueLTStd-Th, HelveticaNeueLTStd-Lt, HelveticaNeueLTStd-Roman, HelveticaNeueLTStd-Bd, AdobeSongStd-Light, MI-LANTING--GBK1-Light, FZLTHK--GBK1-0, FZLTHJW--GB1-0, FZYOUH_504L--GB1-4, FZYOUH_506L--GB1-4, FZYOUH_509R--GB1-4, MicrosoftYaHei, FZLTZHUNHK--GBK1-0, FZLTXHK
Font Family                     : Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Adobe 宋体 Std, 小米兰亭, 方正兰亭黑_GBK, 方正兰亭黑简体, 方正悠黑, 方正悠黑, 方正悠黑, MicrosoftYaHei GBpc-EUC-H, FZLTZHUNHK -GBK1-0-GBpc-EUC-H, FZLTXHK GBpc-EUC-H
Font Face                       : 35 Thin, 45 Light, 55 Roman, 75 Bold, L, Light, Regular, Regular, 504L, 506L, 509R, GBpc-EUC-H, -GBK1-0-GBpc-EUC-H, GBpc-EUC-H
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, TrueType, TrueType, TrueType, TrueType, Unknown, Unknown, Unknown
Font Version                    : OTF 1.029;PS 001.003;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, Version 1.047;PS 001.103;Core 1.0.38;makeotf.lib1.6.5960, OTF 1.029;PS 001.102;Core 1.0.33;makeotf.lib1.4.1585, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.04, 1.00, 1.00, 2.00, 2.00, 2.00, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : HelveticaNeueLTStd-Th_0.otf, HelveticaNeueLTStd-Lt.otf, HelveticaNeueLTStd-Roman.otf, HelveticaNeueLTStd-Bd.otf, AdobeSongStd-Light.otf, MI_LanTing_Light.ttf, 方正兰亭黑_GBK.TTF, FZLTHJW.TTF, 方正悠黑_504L.ttf, 方正悠黑_准ttf.ttf, 方正悠黑_509R.ttf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 9 C, PANTONE Cool Gray 7 C, PANTONE Cool Gray 11 C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants L       : 59.607841
Swatch Groups Colorants A       : -1
Swatch Groups Colorants B       : -1
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 15.00
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 17.0
For                             : ����,
Bounding Box                    : -432 -1663 3912 1198
Container Version               : 9
Creator Version                 : 19

EXIF Metadata provided by EXIF.tools