Beijing Xiaomi Electronics MITVMDZ22AB MI BOX User Manual Declaration

Beijing Xiaomi Electronics Co.,Ltd MI BOX Declaration

User Manual Declaration

Mi Box Important Product InformationMODEL: MDZ-22-ABBeijing Xiaomi Electronics Co.,Ltd112mm112mm纸张：105G双铜K：100字体：Adelle Sans 系列SIMPLIFIED EU DECLARATION OF CONFORMITYHereby, Beijing Xiaomi Electronics Co.,Ltd declares that the radio equipment type MI BOX is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.mi.comThis device is restricted to indoor use only when operating in 5150-5350MHz frequency range in following countries: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. warning: Ensure that the power adapter used meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards.For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible.Receiver Category 2RF FREQUENCY AND POWERThis device offers the following frequency bands in EU areas only and maximum radio-frequency powerBluetooth 2402-2480 MHz: < 10dBmWi-Fi 2412-2472 MHz: < 20dBmWi-Fi 5180-5320MHz and 5500-5700: < 20dBmWi-Fi 5745-5825: < 14dBmAT BE BG HR CY CZ DKEE FI FR DE EL HU IEIT LV LT LU MT NL PLPT RO SK SI ES SE UKCaution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.How to dispose this product Do’s: Don’ts: E-WasteXiaomi products are in conformity with the requirements of the reduction of hazardous substances of the E-waste Rules 2016. The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the E-waste Rules:1. Lead (Pb) – not over 0.1% by weight;2. Cadmium (Cd) – not over 0.01% by weight;3. Mercury (Hg) – not over 0.1% by weight;4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.Carry it to nearest service centre of Xiaomi OR Call the Toll Free Number: 1800 103 6286OR Write to us on service.in@xiaomi.com. Instructions of handling the product during and aer its use and Do’ s and Don ’t s with respect to handling the product;a. Always look for information on the catalogue with your product for end-of-life equipment handling.b. Ensure that only Authorized Recyclers repair and handle your electronic products.c. Always call Authorized E-waste Recyclers to Dispose products that have reached end-of life.d. Always drop your used electronic products, baeries or any accessories when they reach the end of their life at your nearest Authorized E-Waste CollectionCenter / Collection Point.e. Wherever possible or as instructed, separate the packaging material according to responsible waste disposal options and sorting for recycling. a. Do not dismantle your electronic Products on your own.b. Do not throw electronics in bins having “Do not Dispose” sign. c. Do not give e-waste to informal and unorganized sectors like Local Scrap Dealer/ Rag Pickers. For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized Collection Centre, registered Dismantler or Recycler, or Xiaomi Service Centre when disposing of this product. What the Wheelie Bin symbol means: The symbol says don’ t dispose your e-waste into the municipal waste collection bins. That’ s because these wastes are hazardous in nature and need to be recycled in a special way.Address: Room 707,7F,Building 5,No 58,JinghaiWulu Road,Beijing economic and Technological Development Zone,ChinaUse only the following listed power supplies: AIRING MECHANICAL CO.,LTD /EWC+10052-2100 or EBVC+10052-2100Dongguan Aoyuan Electronics Technology Co., Ltd. /AY11DA-AF0522102-UK or AY11DA-AF0522102-EUOperating temperature range：-10 °C to +45 °CFCC StatementNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.The shielded HDMI cable must be used with this unit to ensure compliance with the Class B FCC limits.The device is going to be operated in 5150~5250MHz frequency range. It is restricted indoor environment onlyOperating temperature range：-10 °C to +45 °C

Navigation menu