Beijing Xiaomi Electronics MITVXMRM006 Bluetooth Voice Remote User Manual Declaration

Beijing Xiaomi Electronics Co.,Ltd Bluetooth Voice Remote Declaration

Contents

User Manual Declaration

Bluetooth Voice Remote
Important Product Information
MODEL: XMRM-006
Beijing Xiaomi Electronics Co.,Ltd
112mm
112mm
纸张：105G双铜
K：100
字体：Adelle Sans 系列
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Beijing Xiaomi Electronics Co.,Ltd declares that the
radio equipment type Bluetooth Voice Remote is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address: www.mi.com
RF FREQUENCY AND POWER
This device offers the following frequency bands in EU
areas only and maximum radio-frequency power
Bluetooth V4.0 ( 2402-2480 MHz): < 4 dBm
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
How to dispose this product
Do’s:
Don’ts:
E-Waste
Xiaomi products are in conformity with the requirements of the reduction of
hazardous substances of the E-waste Rules 2016. The content of hazardous
substance with the exemption of the applications listed in SCHEDULE II of the
E-waste Rules:
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.
Carry it to nearest service centre of Xiaomi OR Call the Toll Free Number: 1800 103 6286
OR Write to us on service.in@xiaomi.com. Instructions of handling the product during and aer its use
and Do’ s and Don ’t s with respect to handling the product;
a. Always look for information on the catalogue with your product for end-of-life equipment handling.
b. Ensure that only Authorized Recyclers repair and handle your electronic products.
c. Always call Authorized E-waste Recyclers to Dispose products that have reached end-of life.
d. Always drop your used electronic products, baeries or any accessories when they reach the end of their life at your nearest Authorized
E-Waste CollectionCenter / Collection Point.
e. Wherever possible or as instructed, separate the packaging material according to responsible waste disposal options and sorting for
recycling.
a. Do not dismantle your electronic Products on your own.
b. Do not throw electronics in bins having “Do not Dispose” sign.
c. Do not give e-waste to informal and unorganized sectors like Local Scrap Dealer/ Rag Pickers.
For the purpose of recycling to facilitate effective
utilization of resources, please return this
product to a nearby authorized Collection
Centre, registered Dismantler or Recycler, or
Xiaomi Service Centre when disposing of this
product.
What the Wheelie Bin symbol means: The symbol says don’ t
dispose your e-waste into the municipal waste collection
bins. That’ s because these wastes are hazardous in nature
and need to be recycled in a special way.
Address: Room 707,7F,Building 5,No 58,JinghaiWulu Road,Beijing economic and Technological Development Zone,China
Operating temperature range：-10 °C to +45 °C
WARNING
Do not mix old and new batteries and Do not mix alkaline, standard
(carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
FCC Statement
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.—Consult the dealer or an
experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment

Navigation menu