Beijing iLeja Tech LJ-C2 Intelligent Car Terminal User Manual Carrobot HUD s

Download:
Mirror Download [FCC.gov]
Document ID	3318803
Application ID	vgLr9/LXWp1SwjWQIXS+AA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.4kB (92520 bits)
Date Submitted	2017-03-16 00:00:00
Date Available	2017-03-16 00:00:00
Creation Date	2017-03-03 15:39:05
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2017-03-03 15:39:05
Document Title	Microsoft Word - Carrobot HUD User Manuals
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Carrobot HUD User Manual
Table of Contents
Introduction
Disclaimer
Carrobot components
Installation
Power supply instructions
Button descriptions
Basic operation
Voice activation
Function selection
Navigation function
Call function
Functions setting
Traffic-checking functions
Carrobot network connection
Carrobot accessories
System update options
Troubleshooting
Service
Product Introduction
Carrobot, a multi-functional, holographic heads-up auto display that provides hands-free access to your phone, GPS, wechat messages, music, and online radio. It is a smart HUD equipped with full voice control, which is installed on the dashboard in front of your
car’s steering wheel. Carrobot is the world’s most useful personal driving assistant designed to keep you safe and make your journey
more efficient and enjoyable.
Disclaimer
Looking away from the road can be dangerous. Watch the display screen may increase your risk of distraction and accident. Carrobot is not responsible for any damage, injury, or death due to the use of this product. Users assume all liability for all consequences, financial and otherwise while using this product.
Carrobot components
Standard components: Carrobot, Carrobot power cord
Installation
1.Adhere the Carrobot base to the dashboard
2.Install Carrobot on the base
3.Connect Carrobot with Carrobot OBD (Carrobot power cord)
4.Turn on the reflective film
Power supply instructions
When Carrobot is connected with Carrobot OBD (Carrobot power cord), it will charge whenever you turn it on.
We recommend that you charge your Carrobot with the provided Carrobot OBD cable. While connected to your car with the Carrobot
OBD cable, the unit can be turned on or off automatically when you operate your vehicle.
Recommended installation location for Carrobot OBD
Note: Usually,OBD is installed in Area A
Carrobot button instructions
Three main buttons: Power button, Volume down button, Volume up button
When Carrobot is on,
To continue to use the voice function with the screen off, briefly press the power button
To turn off Carrobot, press and hold the power button for 3 seconds
To restart Carrobot, press and hold the power button for 5 seconds
Power button
Volume down button
Volume up button
Basic operation
All Carrobot features can be accessed through the use of voice control (English only)
To help Carrobot understand you clearly, begin speaking after Carrobot plays the pound tone
We recommend you read the voice control instructions before you using Carrobot.
Carrobot voice control accuracy will improve with every software version update
Note: To control Carrobot more quickly and accurately, use of the Bluetooth remote control is recommended
Voice activation
Say “Hey Carrot!” to activate Carrobot
The following image is the main interface, it will display a message of “please say ‘Hey Carrot’ “ on the interface
Note: The software interface is for reference only, please refer to the matching version
All the commands will show on the interface, after the indication voice when Carrobot is activated
Note: To give commands on Carrobot when Carrobot is playing music or doing navigation, please say “Carrobot"
Function selection
To select a particular function, please choose relevant command language. Here are all the command languages.
Command language
Navigation
Navigate to Yellowstone national park
Call Lily
Play music
Listen to radio
Real-time traffic information
Set
Go back
Function
To use GPS function
To set the destination to be Yellowstone national park
To make a phone call
To play music
To listen to radio
To check real-time traffic information
To setup Carrobot
To close the current page
Navigation function
Voice navigation
Step 1: Activate Carrobot
Say “Carrobot” in the home page to activate Carrobot and enter the function selection page
Step 2: Enter navigation function
Say “Navigation" to enter the destination setting page
Step 3: Select the destination
Say the destination name such as “Yellowstone National Park” to set the destination
Shortcuts: Go Home, Go to Company, Continue Navigation
Command language instructions for the destination setting
Command language
Function
Go Home
To choose home address as the destination.You need set a address as home address
Go to Company
To choose company address as the destination.You need set a address as company address
Continue Navigation
To navigate to the last destination which is not arrived yet
Reset home /company address
To reset home /company address
Exit Current Navigation
To exit Current Navigation page
Step 4: Address selection confirmation
Some destinations may be searched for more than one results, please select one to confirm it
Note: If there are many similar locations, it will show up in more than one page. You can say "next page / previous page”to choose
the destination.
Step 5: Route Options
Carrobot will provide some route options to choose like avoid highways, avoid tolls, avoid ferries
Command language instructions for Route Options
Command language
Avoid highways
Avoid tolls
Avoid ferries
Function
To choose the route avoiding highways
To choose the route avoiding tolls
To choose the route avoiding ferries
Cancel
To cancel the destination and go back to the destination setting page
The navigation process
After you start navigating, you will see the following navigation interface:
1. Travel path 2. Compass 3. Current speed 4. Small map overview and real-time traffic information
ahead of the road 6. speed limit information ahead of the road
Command language instructions
Command language
Re-Navigate
Exit Current Navigation
Check the overview map
Navigate to the rail station
Function
To end the current navigation and start a new one
To exit current navigation
To check the overview map
To set rail station as a destination
Note: Maps are provided by Google maps
Call function
Connect phone through bluetooth before making a phone call
Carrobot bluetooth name is “Carrobot-HUD”
Note:
Phone will connect with Carrobot automatically via Bluetooth after the initial pairing.
Make a phone call with voice control
Step 1: Activate Carrobot
5. traffic camera information
Say “Carrobot” to activate Carrobot and enter the function selection page
Step 2: Enter phone call function
Say “make a phone” and enter the contact selection page
Step 3:Select an contact
Say the contact name or phone number
Step 4 :After selecting a contact, a confirmation screen will appear. You can choose dial directly or wait for the countdown to finish
then dial the number. If the contact is wrong, you can say "Cancel" to cancel the call.
Call process
Carrobot will remind you if phone is ringing
Command language instructions
Command language
Answer
Decline
Function
To answer the call
To decline the call
Note:
1.Carrobot does not currently support multi-party call
2.Carrobot does not currently support supported multiple concurrent Bluetooth connections
Function setting:
Command language instructions
Command language
Function
Turn on the hotspot
Turn on the hotspot (carrobot-xxx)and get the password automatically
Turn on radar detector
Turn on radar detector and it will provide radar detector information
Check real-time traffic information
Carrobot will provide you with the real-time traffic information
Turn on the wireless network
Turn Carrobot wireless network on to connect with other device
Increase brightness / lower brightness
Adjust Carrobot screen brightness
Turn on/ off gestures
Turn on/ off gestures function
Turn on/off system update automatically function Turn on/off system update automatically function
Turn on/off radio station
Turn on/off radio station
Exit the settings
Exit the settings menu
Carrobot accessories
Carrobot provide the video adapter, which allows you can connect Carrobot with a dashcam.
Note: For a detailed description of Carrobot accessories, please check product manual
System update automatically function
When Carrobot is connected with internet, the system will update to the latest software version automatically. This will add new features and improve existing functions.
Troubleshooting
Q: The interface is displayed, but no sound is heard
A: Please check the volume, turn up the volume, and if you turn on the music and the radio at the same time, please "turn off the radio”
Q: I can’t activate Carrobot with “Hey Carrobot”
A: Try repeating the command more slowly. If this does not work, try turning off the device and then turning it back on again.
Services
This is the Carrobot promise: We are so confident that you will love your Carrobot C2 that we offer you a 14-day money-back guarantee. If within 14-days of receiving Carrobot, you are not completely satisfied, simply return the product for a full refund. Carrobot and
all accessories must be returned in new and re-sellable condition upon receipt of the product to ensure a full refund.
We also provide a 1 year quality guarantee against manufacturer defects.
Accessories Warranty
We provide warranty policy for Carrobot accessories which are purchased from Carrobot or our licensed distributors.
Note: Gifts are not included
Product warranty card
Product information
Product Name: Carrobot HUD
Product Model: LJ-C2
Factory number:
Purchasing date:
Customer information
Customer Name:
Customer address:
Customer phone number:
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Intelligent Car Terminal / (FCC ID:
2AKVNLJ-C2) has also been tested against this SAR limit. SAR information on this and other pad can be viewed on‐line
at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical body-worn
operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure requirements, and should be avoided.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:03:03 15:39:05+08:00
Modify Date                     : 2017:03:03 15:39:05+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - Carrobot HUD User Manuals
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:38232d9d-0de5-4d44-9242-07d5467e6437
Instance ID                     : uuid:e638b1f9-d034-4f44-9912-f661392fbebf
Page Count                      : 14

EXIF Metadata provided by EXIF.tools