Belco Co GH5810H 2.4GHz/5.8GHz Analog Cordless Phone (Handset) User Manual FCC information
Belco International Co Ltd 2.4GHz/5.8GHz Analog Cordless Phone (Handset) FCC information
Belco Co >
Contents
- 1. FCC information
- 2. User Manual part 1
- 3. User Manual part 2
FCC information
FCC WANTS YOU TO KNOW This equipment complies with Part 58 ot the FCC nilee and the requirements adopted by the ACTADn the bottom ofthis equipment is a label that contains, among other inionnation, a product Identifier In the format us: XXXXXXXXXXXXXXXX .|i required, This number must be provided to the telephone company . An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment Is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant, See Installation Instructions ior details. The REN is used to determine the number oi devices that may be connected to a telephone line, Excessive HENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum otthe HENs should not exceed live (50), To be certain of the number of devtces that may be connected to a line. as determined by the total RENs, contact the local telephone company(For products approved aiter July 23,2001,the REN tor this product Is pan oi the product identifier that has the iormat US: xxxxxxxxxxxxxxxx .The digits represented byoz are the REN without a decimal pointte.g.,03 is a HEN oi 0.3).For earlier products, the HEN is sepa- rately shown on the label. It your telephone equipment causes harm to the telephone network. the telephone company may discontinue your service temporarily. Ii possible, they will notify you in advance. But ii advance notice isn't practical, you will be notiiied as soon as possible. You will be iniormed oi your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations, or procedures that could aiiect the proper functioning at your equipment. If they do. you will be notified in advance to give you an opportunity to maintain uninterrupted telephone servroe. Ii you experience trouble with this telephone equipment, disconnect irom the network until the problem has been corrected or until you are sure that the equipment Is not mallun- ctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subleci to state teril‘ts. The USOC number at the registration iack iorthe equipment is HJiiC. This equipment is hearing aid compatible. Warning: Changes or modiiications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 10 NOTE: This equipment has been tested and iound to comply with the limits for a Class B digital device, pursuant to Part 15 at the FCC Rules. These limits are designed to provide reasonable protection against harmful interierenoe in a residential installation. Some cordless telephones operate at Irequencies that may cause interierence to nearby TV’s and VCH's. To minimize or prevent such interierence, the base at the cordless telephone should not be placed near or on top oi a TV or VCR. Ii interference is experienced, moving the cordless telephone iarther away irom the TV or VCR will citen reduce or eliminate the interierence. However, there is no guarantee that interior- once will not occur in a particular installation. If this equipment does cause harmiul intarierence to radio or television reception. which can be determined by turning the equipment pit and on. the user is encouraged to try to correct the interference by one or more oi the iotlowing measures: . Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receivert - Connect the equipment into an outlet on a circuit diiferent lrom that to which the receiver is connected. - Consult the dealer or an enperienced radio TV technician ior help. NOTICE: If your home has specially wired alarm equipment connected to the telephone Iine,ensure the Installation oi this GHSBiO does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone con-A pany or qualified installer . 11 NOTE: This equipment has been tested and found to comply With the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a panicular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures: Fteorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. NOTICE: If your home has specially wired alarm equipment connected to the telephone line,ensure the installation of this GH5810 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone com- pany or qualified installer . tl
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2004:02:01 16:42:05+08:00 Create Date : 2004:02:01 16:41:47+08:00 Creator : Adobe Photoshop 6.0 Producer : Adobe Photoshop for Windows X Resolution : 360 Y Resolution : 360 Displayed Units X : inches Displayed Units Y : inches Global Angle : 30 Global Altitude : 30 Copyright Flag : False URL List : Slices Group Name : Num Slices : 1 Photoshop Thumbnail : (Binary data 2234 bytes, use -b option to extract) Has Real Merged Data : Yes Writer Name : Adobe Photoshop Reader Name : Adobe Photoshop 6.0 Page Count : 2EXIF Metadata provided by EXIF.tools