Belco Co PM2400 2.4 GHz Analog Cordless Telephone User Manual Manual
Belco International Co Ltd 2.4 GHz Analog Cordless Telephone Manual
Belco Co >
Manual
PhoneMate and the PhoneMate Logo are registered trademarks of PhoneMate
Corporation and are used under license from PhoneMate Corporation.
Thank you for purchasing this PhoneMate Telephone.
Please read this manual carefully prior to using.
IMPORTANT SAFETY INSTRUCTIONS ........................................................................1
FCC REGULATIONS...................................................................................................3
BATTERY CAUTIONARY INSTRUCTIONS....................................................................5
PM2400 PARTS CHECKLIST.......................................................................................6
CONTROLS AND FEATURES ......................................................................................7
CHOOSING A LOCATION .........................................................................................9
TELEPHONE SET-UP.................................................................................................10
BATTERY INSTALLATION .........................................................................................12
BASIC OPERATION..................................................................................................14
SPEED DIALING.......................................................................................................15
OTHER FEATURES....................................................................................................16
CARE AND MAINTENANCE .....................................................................................17
TROUBLE SHOOTING..............................................................................................18
GLOSSARY...............................................................................................................20
WARRANTY STATEMENT.........................................................................................21
PM2400 TABLE OF CONTENTS
1
!! Always follow basic safety precautions when using this product to
reduce the risk of injury, fire, or electrical shock.
When using this product, basic precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions
2. Follow all warnings and instructions marked on the product.
3. Use only with class 2 power source DC 9V 300mA.
4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use this product near water; for example, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
6. Do not place this product on an unstable cart, stand, or table. The product may fall
causing serious damage to the product.
7. Slots and openings in the cabinet back or bottom are provided for ventilation. To
protect it from overheating, these openings must not be blocked or covered. The
openings should never be blocked by placing the product on the bed, sofa, rug, or
other similar surface. This product should never be placed near or over a radiator or
heat register. This product should not be placed in an enclosed environment unless
proper ventilation is provided.
8. Do not allow anything to rest on the power cord. Do not locate this product where
the cord will be abused by animals or persons walking on it.
9. Do not overload wall outlets and extension cords as this can result in risk of fire or
electrical shock.
10. Never push objects of any kind into this product through cabinets slots as they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electrical shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electrical shock, do not disassemble this product. Instead take
it to a qualified service person when service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks. Incorrect re-
assembly can cause electrical shock when the appliance is subsequently used.
12. Unplug all cords and refer servicing to qualified service personnel under the
following conditions:
iWhen the power supply cord or plug is damaged or frayed
ii If liquid has been spilled into the product.
iii If the product has been exposed to rain or water.
iv If the product does not operate normally by following the operating instructions,
adjust only those controls covered in the operating instructions. Improper
Model PM2400
IMPORTANT SAFETY INSTRUCTIONS
!!
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 1 AGFA SelectSet Avantra 25
2
adjustment of other controls may result in damage and require work by a
qualified technician to restore the product to normal operation.
13. Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
14. Do not use a telephone to report a gas leak in the vicinity of the leak.
IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL
PRECAUTIONS SHOULD BE OBSERVED:
1. Use only the type and size of batteries specified in the users manual.
2. Do not dispose of batteries in a fire. The cells may explode. Check with local codes
for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It maybe toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets and keys. The battery or conductor may overheat
and cause burns.
5. Do not attempt to recharge the batteries with this product or identified for use with
this product. The batteries may leak corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries provided with or identified for use with
this product by heating them. Sudden release of the battery electrolyte may occur
causing burns or irritation to eyes or skin.
7. When replacing batteries, all batteries should be replaced at the same time. Mixing
fresh and discharged batteries could increase internal cell pressure and rupture the
discharged batteries.
8. When inserting the batteries into this product, the proper polarity or direction must
be observed. Reverse insertion of the batteries can cause charging, which may result
in leakage or explosion. If a battery is installed incorrectly it may explode.
9. Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during this time the batteries could
leak, damaging the product.
10. Discard "dead" batteries as soon as possible since they are more likely to leak in a
product.
11. Do not store this product, or the batteries provided with or for identified use with
this product, in high temperature areas.
12. If your product uses a rechargeable battery, charge the battery (ies) only in
accordance with the instructions and limitation specified in the User Manual.
13.
Plug the adaptor to the socket-outlet that is nearest to the equipment and
shall be easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
3
FCC REGULATIONS Model PM2400
1. This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that contains,
among other information, a product identifier in the format US : AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
2. The USOC number of the registration jack for the equipment is RJ11C.
3. A FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network
or premises wiring using a compatible modular jack which is Part 68 compliant. See
Installation Instructions for details.
4. The REN is used to determine the quantity of devices which may be connected to
the telephone line. Excessive RENs on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company.
5. If this terminal equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is unnecessary.
6. The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equipment. If this
happens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted services.
7. The equipment cannot be used on public coin phone service provided by the
telephone company. Connection to party line service is subject to state tariffs.
8. Please follow all instructions when replacing any parts (e.g. battery
replacement section), otherwise do not attempt to alternate or repair any
parts of the device except those specified.
9. This equipment, if it uses a telephone handset is hearing aid compatible.
10. If trouble is experienced with this equipment, for repair or warranty information,
please contact the service center below. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
WARNING:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 3 AGFA SelectSet Avantra 25
4
Service can be obtained at:
PhoneMate Service Center
14515 Valley View Ave. #B
Santa Fe Springs, CA
90670
INTERFERENCE INFORMATION: PART 15 OF FCC RULES
Some telephone equipment generates and uses radio frequency energy, which if not
properly installed, may cause interference to radio and television reception.
This unit has been tested and found to comply with the limits for a Class B computing
device in accordance with the specifications in Part 15 of the FCC rules. These
specifications are designed to provide reasonable protection against such interference in a
residential installation.
If this equipment does cause interference to radio or television reception, when it’s in use,
the user is encouraged to try to correct the interference by one or more of the following
measures:
A. Where it can be done safely, reorient the radio or TV receiving antenna.
B. To the extent possible, relocate the television, radio, or other receiver with
respect to the telephone equipment.
C. If your telephone products run on AC power, plug your product into an AC outlet
that’s not on the same circuit as the one used by the radio or television.
NOTICE : If your home has a wired alarm equipment system connected to the
telephone line, ensure the installation of this PM2400 does not disable your
alarm equipment. If you have questions about what will disable the alarm
equipment, consult your telephone company or a qualified installer.
FCC REGULATIONS
This device complies with Part15 of the FCC rules. Operation is subject to the
following two conditions : (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation. Privacy of communications
may not be ensured when using this phone.
5
CAUTION :
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions:
■
For the cordless handset, use only 3.6V 400mAh Nickel-Cadmium (Ni-CD), SN05-
AS003-215 made by SANIK BATTERY Co.,Ltd, cordless telephone battery pack.
(included).
■
Do not dispose of the batteries in a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
■
Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
■
Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or conductor
may overheat and cause burns.
■
Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may occur causing burns
or irritation to eyes or skin.
■
When inserting batteries into this product, the proper polarity or direction must
be observed. Reverse insertion of batteries can cause charging, and that may
result in leakage or explosion.
■
Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during this time the battery could
leak in the product.
■
Do not store this product, or the batteries identified for use with this product, in
high temperature areas. Batteries that are stored in a freezer or refrigerator for the
purpose of extending shelf life should be protected from condensation during
storage and defrosting.
Batteries should be stabilized at room temperature prior to use after cold
storage.
BATTERY CAUTIONARY INSTRUCTIONS Model PM2400
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 5 AGFA SelectSet Avantra 25
6
Handset
Base
AC power adapter
Cord for desk use
Ni-CD battery pack
PM2400 PARTS CHECKLIST
2
1
1
2
3
4
5
5
4
3
7
Talk
The Talk is used to access the telephone
line or end a call.
Redial Key
When the phone is off-hook,
press Redial key to redial the last number
dialed. Redial is also used to insert a
measured pause into a number stored
in the phone book.
Channel Key (CH)
The CH key, if pressed when the line is
off-hook, will scan up to 40 channels
and select the clearest one to provide
the best possible reception.
Mute Key
The Mute key is used to temporarily
mute the handset microphone.
Dial Pad
Numeric keys are used in the
conventional manner for dialing.
Flash Key
The Flash key is used to access telephone
company services, such as call waiting.
Memory Key (MEM)
Use MEM to program and retrieve the
numbers in the speed dial directory.
Temporary Tone key *
If the base is set to pulse dialing, pressing *
causes subsequent digits to be dialled out
using tone until the line is put back on hook.
In Use LED
On (red) when line is in use. Flashes
steadily when the phone is muted.
Volume Switch
The Volume switch is used to adjust the
handset receiving level among Hi, Low.
CONTROLS AND FEATURES Model PM2400
9
10
7
8
2
3
1
10
1 6
2 7
8
3
9
410
5
6
5
4
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 7 AGFA SelectSet Avantra 25
8
BASE
Page
Used to initiate a handset page.
Charge LED
On (red) when the handset is on the
cradle being charged or when the handset
is in use. On if the line is in use.
Charging Contacts
Used to recharge battery and reset the
security code in the handset.
Tone/Pulse Switch
Used to set the dialing method for tone or
pulse dialing. It is located at the bottom of
the base unit.
CONTROLS AND FEATURES
3
1
2
4
1 3
24
9
When installing your telephone, consider the following:
The best location:
■
Near a central location on a level dry surface.
■
Away from microwave ovens
■
Away from VCR’s and TV sets and other electronic equipment
■
Away from sources of noise, such as windows opening onto a busy street
■
Away from personal computers
■
Away from excessive moisture, extremely low or extremely high temperatures,
dust, mechanical vibration or shock.
The location of your telephone affects the quality of the reception. Consider the following
when choosing a location or if you are experiencing poor reception.
■
Away from other cordless telephones
■
Place the base near an AC electrical outlet and near a telephone line jack
■
Place the base away from metal walls and metal file cabinets.
■
Try to avoid power bars or multiple appliances plugged into the same electrical
outlet
CHOOSING A LOCATION Model PM2400
CAUTION: The cordless telephone operates at a frequency that may cause
interference to nearby TV’s and VCR’s; the base phone should not be placed
near, or on top of a TV or VCR. If interference is experienced, moving the
cordless phone telephone farther away from the TV or VCR will often reduce or
eliminate the interference.
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 9 AGFA SelectSet Avantra 25
10
Connecting the Base
1. Connect the telephone line cord to the "TEL LINE" jack and to a telephone outlet.
2. Connect the AC power adapter to the 9V DC jack and to an AC outlet.
Note: Use only the supplied AC power adapter. Do not use any other AC power adapter.
Connect the AC power adapter to a continuous power supply. Place the phone close to the AC
outlet so that you can plug in the AC power adapter easily.
TIP: If your telephone outlet is not modular, contact your telephone company
for assistance.
Tone/Pulse Switch
1. Choose the correct dialing mode.
2. Select the dialing mode Tone or Pulse by setting the switch at the bottom of the
base unit.
Note: Changes to the switch position during a call do not take effect until the call has ended.
TIP: If you are unsure of the proper dialing mode, make a trial call
with the dial mode setting to TONE. If the call connects, leave
the switch as is (TONE mode), otherwise, set to PULSE.
Handset Ringer Switch
Adjust the handset ringer volume using the RINGER switch on the right side of the
handset. Select between ringer On, or ringer Off.
Wall Mounting
The PM5800 telephone conforms to a standard wall mount bracket. If you are not using
a standard wall mount bracket, the PM5800 maybe installed onto two screws (not
included) fastened into the wall. When installing screws into plasterboard walls, use wall
anchors (not included) to ensure that the screws remain secure. Place the base unit on
the wall and mark the location of the screws. Insert the screws in the wall leaving 3/16"
of each screw extending out from the wall.
TELEPHONE SETUP
11
Model PM2400
To install the 3.6V 600mAh cordless handset battery pack:
1. Slide open the battery compartment door on the back of the handset.
2. Plug the battery connector into the 2-pin connector in the battery compartment,
and then insert the battery.
3. Close the battery compartment door.
4. Place the handset on the base unit cradle.
5. Once you have installed the battery pack and placed the handset on the base you
will hear a tone indicating the handset has connected with the base and will
successfully charge.
6. IMPORTANT: Charge the battery pack for at least 12 hours before using the
handset the first time.
7. The CHARGE LED on the base illuminates when the handset is properly making
contact with the charge terminals.
Battery Duration
A fully charged battery lasts for approximately:
■
3 hours when you use the handset continuously (talk time).
■
3 days when the handset is not in use (standby).
When the Battery Needs Charging
■
The handset will beep in a talk mode.
■
The In Use/Batt. Low LED will flash in an idle mode.
BATTERY INSTALLATION
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 11 AGFA SelectSet Avantra 25
12
Making Calls
1. If the handset is in the base, lift the handset from the base. Push the "Talk" button
and listen for the dial tone.
2. Dial the number you wish to dial.
3. When you are finished talking, press the Talk key or place the unit back into the
base to end the call.
Note: The IN USE light on the handset will illuminate when the line is active.
Receiving Calls
When you hear the phone ring:
1. If the handset is in the base, lift the handset from the base. Push the "Talk" button
to answer the call.
2. If the handset is off the base, you will need to press Talk to answer the call.
3. When you are finished, push Talk or place the handset back on the base.
Additional Options
DO THIS
Press Talk. Wait for dial
tone and then press
Redial.
Switch the Volume switch
during a call until the
desired volume level is
reached.
Press the * key after the
phone is in use. The phone
will remain in tone dialing
mode for the duration of
the call.
Press the Mute key.
Press Mute to continue
speaking to the caller
TO
Redial the
last number
Adjust the
volume in
the earpiece
Switch to
temporary
tone dialing
Mute a call
BASIC OPERATION
13
The Unit will store up to 10 speed dial numbers.
Storing Phone Numbers
1. With the handset in the idle state, press MEM. The handset will beep.
2. Dial the number you wish to store (up to 16 digits).
Note: Press Redial to insert a dialing pause into the number. The pause lasts for 4 seconds
and uses one digit of the 16 digits available.
3. Press MEM.
4. Press the dial pad key for the location where you wish to store the number. The
handset will give a confirmation tone.
Note: If you make a mistake the handset will give three quick beeps to let you know that the
number was not stored.
Making Speed Dial Calls
1. Push Talk. The LED on the handset will flash while the handset is scanning for a
clear channel. The handset In Use LED will glow steadily when a connection is
made. Wait until you hear a dial tone.
2. Press MEM and the dial pad key location where the
number is stored.
3. When you are finished with your call, press TALK, or
place the handset back on the base.
Note: Be sure to check that the line is not in use by another
extension.
Deleting a Stored Number
1. With the handset in the idle state, press MEM. The
handset will beep.
2. Press Redial and then press MEM. After each press the
phone will beep.
3. Press the dial pad key location where the stored number
that you want to delete is located. The handset will give
a confirmation tone.
SPEED DIALING Model PM2400
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 13 AGFA SelectSet Avantra 25
14
Using the Handset Finder (PAGE)
1. Press Page on the base. If the handset is within range, a triple beep will sound for
50 seconds.
2. Place the handset in the base or press the PAGE key on the base or press the TALK
key on the handset, to stop the page.
Security Code
The security code prevents your cordless telephone conversation from being accessed by
a phone on a different line. Once the handset battery is fully charged, the handset will
automatically select the code from a total of over 65,000 combinations. The code is
changed every time the handset is placed in the cradle (indicated by a beep).
If you experience difficulty with placing or receiving calls, a lost security code may be the
cause of the problem. When this occurs, the handset can no longer communicate with
the base. Reset by placing the handset on the base for 5-10 seconds. If that does not
work, unplug the AC adapter from the wall outlet. Disconnect the handset battery for 5-
10 seconds and then reconnect. Place the handset back on the base and then replug the
AC adapter.
Channel Changing
If you are experiencing interference during a telephone call, press the CH key. The Unit
will scan up to 40 channels and select the clearest one to provide the best possible
reception.
Out of Range Warning
If the handset is moving too far away from the base, the phone will sound a triple beep
every two seconds to warn you that it is out of range. Move closer to the base to end the
beeping and maintain the connection on your phone call. Otherwise, the call may be
disconnected.
OTHER FEATURES
15
Your PhoneMate PM2400 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please read the
following maintenance instructions.
1. Keep the PM2400 away from heat as high temperatures can shorten the life of the
electrical components and distort or melt its plastic parts.
2. The PM2400 should be kept free of dust and moisture. If it gets wet, wipe it dry
immediately. Liquids can contain minerals that can corrode electronic circuits.
3. Handle your PM2400 gently and carefully. Dropping it can cause serious damage to
circuitry, or the plastic case, which may result in malfunction.
4. Do not use any type of chemical or any abrasive powder to clean the cabinet. Use
only mild detergents on a soft damp cloth to clean the PM2400 telephone.
5. The PM2400 has built-in surge protection circuits that meet or exceed FCC
requirements. However, an incident such as a lightning strike at or near the
telephone lines, could cause serious damage.
6. If the PM2400 is installed in an area with frequent or severe electrical storms, it is
suggested that the telephone be disconnected during these storms or that
additional surge suppression equipment be added to the installation.
7. In the case of trouble with the telephone, do not attempt to repair the telephone
yourself. It is the responsibility of users requiring service to report the need for
service to our Service Department. They will make the necessary arrangements for
repair or replacement.
8. If you should have any questions regarding the operation of your PhoneMate
PM2400, please visit our web site: www.phonemate.com
9. Please register your product by mailing in the Product Registration form included
with your PhoneMate PM2400
CARE AND MAINTENANCE Model PM2400
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 15 AGFA SelectSet Avantra 25
16
No dial tone/phone will not dial out
■
Check that the AC power adapter is plugged into a working AC power outlet.
■
Check all telephone cord connections or try another wall jack.
■
Do a basic reset of the phone: Disconnect the phone from the wall and remove
the battery for 30 minutes and then re-install as instructed by the manual.
■
Try other phones in the house to ensure it is not a line problem with the
telephone company.
■
Was the battery charged for at least 12 – 15 hours?
■
Is the "LOW BATTERY INDICATOR" on?
Can’t hear the ring signal
■
Check the ringer volume controls; verify that the switch is not set to "Off".
■
Check that the AC power adapter is plugged into a working AC power outlet.
■
Check all telephone cord connections or try another wall jack
While on a call, you hear another call on the line
or experience radio frequency interference
■
Switch channels to a clear channel
■
Check the wiring for bad connections
■
Do not use this phone within close proximity to other electronic appliances such
as TV’s, VCR’s and microwave ovens
Can’t receive or make phone calls
■
Check if the phone is set to the correct type of service, either Tone or Pulse
■
Check that the AC power adapter is plugged into a working AC power outlet.
■
Check all telephone cord connections or try another wall jack
■
Check to make sure that the Battery is properly installed and connected
TROUBLE SHOOTING
17
There are continuous short beeps instead of a
dial tone when the handset is far from the base
■
The beeps are a warning that you are too far away from the base. Move closer to
the base.
There is interference on the handset
■
Was the battery charged for at least 12 – 15 hours?
■
Is the "LOW BATTERY INDICATOR" on?
■
Move closer to the base.
■
Is the phone within close proximity to other electronic appliances such as TV’s,
VCR’s and microwave ovens?
The LOW BATTERY INDICATOR lights after a few telephone calls,
even though the battery has been fully charged for 12-15 hours
■
Replace the battery pack with a new battery
EXTRA HELP
■
Should you have any additional questions, please visit our web site at
www.phonemate.com
TROUBLE SHOOTING Model PM2400
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 17 AGFA SelectSet Avantra 25
18
PBX (Private Branch Exchange)
A small, central, privately owned, switching telephone system where a digit (like "9")
must be dialed first in order to access an outside line.
FLASH
A signal sent by the phone to the local telephone company supporting services such as
call waiting.
REDIAL
Performs single button dialing of the last number dialed.
RINGER LEVEL CONTROL
Permits adjustment of the ringer volume level.
SPEED DIALING
Allows programming of frequently dialed numbers so that they can be dialed with the
two touch speed dial button.
TONE/PULSE OPTION
Enables you to switch from pulse (rotary dial method) to tone (push button) dialing.
VOLUME LEVEL CONTROL
Permits volume adjustment of the handset and headset during a conversation.
GLOSSARY
19
This limited warranty gives you specific legal rights: you may also have other rights,
which vary from state to state. The limited warranty is extended only to the original
consumer of a PhoneMate branded product by the Manufacturer and is valid only with
respect to consumers within the United States of America and Canada. Should this
product prove defective by reason of improper workmanship or material during the
period of one (1) year from date of original purchase, the Manufacturer will repair or, at
its option, replace the product without charge for parts or labor. If Manufacturer elects to
replace the product, such replacement may be accomplished with a factory-
reconditioned unit.
This limited warranty does not apply: (a) to any product damaged by accident, misuse,
improper line voltage, lightning, fire, water, or other acts of nature, (b) if the product is
altered or repaired by anyone other than the Manufacturer or one of its authorized
warranty stations or (c) if the FCC-approved connector plugs are removed. This limited
warranty does not cover broken or marred cabinets.
Except to the extent prohibited by law, all implied warranties made by the Manufacturer
in connection with this product are limited in duration to a period of one (1) year from
the date of original purchase, and no warranties, whether expressed or implied, shall
apply to this product after said period.
Should this product prove defective in workmanship or material, the consumer’s sole
remedies shall be such repair or replacement as is herein above provided. Under no
circumstances shall the Manufacturer or PhoneMate Corporation be liable for any loss or
damage, direct, consequential, or incidental arising out of the use of or inability to use
this product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In order to obtain warranty service, you must provide evidence of purchase date. For your
convenience, keep the dealer’s dated bill of sales or delivery ticket as evidence of the
purchase date.
PhoneMate and the PhoneMate Logo are registered trademarks of PhoneMate
Corporation and are used under license from PhoneMate Corporation.
WARRANTY Model PM2400
IMPORTANT! SALES SLIP OR EVIDENCE OF PURCHASE DATE REQUIRED.
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 19 AGFA SelectSet Avantra 25
INSTALLATION
AND
OPERATING
GUIDE
www.phonemate.com
Model PM2400
2.4GHz
CORDLESS
TELEPHONE
Rev.0
PM2400Manual_En_v6 2005.2.5 12:56 PM ˘ ` 21 AGFA SelectSet Avantra 25