Belkin F5D7010 WLAN PCMCIA Card User Manual P74217 F5D7010 man 1 03

Belkin International, Inc. WLAN PCMCIA Card P74217 F5D7010 man 1 03

Users Manual

User ManualF5D7010Belkin Corporation501 West Walnut StreetCompton • CA • 90220 • USATel: 310.898.1100Fax: 310.898.1111Belkin Components, Ltd.Express Business ParkShipton Way • Rushden • NN10 6GLUnited KingdomTel: +44 (0) 1933 35 2000Fax: +44 (0) 1933 31 2000Belkin Components B.V.Starparc Building • Boeing Avenue 3331119 PH Schiphol-Rijk • The NetherlandsTel: +31 (0) 20 654 7300Fax: +31 (0) 20 654 7349Belkin, Ltd.7 Bowen Crescent • West GosfordNSW 2250 • AustraliaTel: +61 (0) 2 4372 8600Fax: +61 (0) 2 4372 8603Belkin Tech SupportUS: 310.898.1100 ext. 2263800.223.5546 ext. 2263Europe: 00 800 223 55 460Australia: 1800 666 040P74217© 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.belkin.com54g Wireless NotebookNetwork CardShare your broadband Internet connection and files
TABLE OF CONTENTS1INTRODUCTIONIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Applications and Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Knowing your Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Installing and Setting Up the Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Software and Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Connecting to your Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . .12Uninstalling the Software and Drivers . . . . . . . . . . . . . . . . . . . . . . . .12Using the Belkin Wireless LAN Configuration Utility . . . . . . . . . . . . . . . . . .13The Wireless Networks Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19The Link Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20The Site Survey Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Thank you for purchasing the Belkin 54g Wireless Notebook Network Card (theCard). Now you can take advantage of this great new technology and gain thefreedom you need around the home or office without using cables. The WirelessNotebook Network Card works like a conventional network card, but without thewires. The easy installation and setup will have you networking wirelessly inminutes. Please be sure to read through this manual completely to be sure thatyou are getting the most out of your Wireless Notebook Network Card.
OVERVIEWApplications and Advantages • Wireless roaming with a laptop around the home or officeOffers the freedom of networking without cables.• Connection rates of up to 54MbpsProvides immediate, higher-speed wireless connectivity at home, work, and hotspot locations without compromising the use of existing 802.11b products.• Compatibility with 802.11b products54g wireless LAN solutions are backward-compatible with existing Wi-Fi (IEEE802.11b) products and with other products that display the 54g mark.• Difficult-to-wire environmentsEnables networking in buildings with solid or finished walls, or open areaswhere wiring is difficult to install.• Frequently changing environmentsAdapts easily in offices or environments that frequently rearrange or change locations.• Temporary LANs for special projects or peak timeSets up temporary networks such as at trade shows, exhibitions, andconstructions sites, which need networks on a short-term basis; alsocompanies who need additional workstations for a peak activity period.• SOHO (Small Office/Home Office) networking needsProvides the easy and quick, small network installation SOHO users need.OVERVIEW2FeaturesThe Card complies with the IEEE 802.11b standard in order to communicate withother 802.11b-compliant wireless devices at 11Mbps as well as other 54gproducts at 54Mbps that have the 54g™ badge on the package.54g products run at speeds of up to 54Mbps and operate on the same 2.4GHzfrequency band as 802.11b Wi-Fi products.• 2.4GHz ISM (Industrial, Science, and Medical) band operation• Integrated easy-to-use Wireless Configuration Utility• Wireless interface compliance with the IEEE 802.11b standard and 54gproducts• PCMCIA interface, for operation in virtually any notebook computer• 64 or 128-bit Wireless (WEP) Encryption• Wireless access to networked resources• Support for both Infrastructure and Ad-Hoc (peer-to-peer) networking modes• Data rate of up to 54Mbps o Supports 11, 5.5, 2 or 1Mbps rates (802.11b)o Supports 54, 48, 36, 24, 18, 12, 9, or 6Mbps rates (54g)• Easy installation and use• Internal antenna• LED power and network link indicators3
KNOWING YOUR CARD(a) Power LEDWhen the Card receives power, this light will be on.(b) Link LEDWhen the Card has a link to a wireless network, the light will be solid.When not linked to a wireless network, the light will slowly flash.(c) Card ConnectorThis is the side of the Card that fits into the PCMCIA slot of your laptop(d) AntennaOVERVIEWProduct SpecificationsHost Interface: 32-bit CardBusPower Consumption: Tx/Rx peak 550/350mA @ 3.3VDC (max.)Certification: FCC Class B, CE Mark, C-TickOperating Temperature: (0–85 degrees C)Storage Temperature: (-40–90 degrees C)Humidity: Max. 95% (non-condensing)Typical Operating Range: 802.11b: 590.6 ft. (180m) @ 11Mbps, 984.3 ft. (300m) @ 5.5 Mbps or lower54g: 164 ft. (50m) @ 54Mbps, 492.1 ft. (150m) @ 18Mbps System Requirements• PC-compatible laptop with one available PCMCIA slot• Windows® 98, 2000, Me, XPPackage Contents• Belkin 54g Wireless Notebook Network Card• Quick Installation Guide• Installation Software CD• User Manual54(c)(a)(d)(b)
Installing your Card is done in three easy steps.1. Install the software FIRST. If you plug your Card into your laptop before youinstall the software, it will not work. 2. Plug the Card into your laptop.3. Let Windows operating system finish installing the Card.Note: Install the software first before you install the card into your notebook.Software and Driver Installation1. Insert the CD into your CD-ROM drive.2. The Belkin Wireless Notebook Network Card Setup Utility screen willautomatically appear. If it does not appear within 15-20 seconds, then select your CD-ROM drive and double-click on the folder named “Files”. Nextdouble-click on the icon named “F5D7010W_UTILITY.exe”.3. In the menu window, drag your mouse over the “Install” button then select“Click here” to start the software installation program.INSTALLING AND SETTING UP THE CARD4. The installer will start. If you are using Windows XP, it is recommended thatyou use the Belkin Wireless Notebook Network Card Utility to manage theCard’s wireless settings. If you want to use Windows XP to manage the Card,check “Use the Windows XP Wireless Network Connection Utility”. Instructionson how to use Windows XP’s Connection Utility are available from Microsoft.Click “Next” to continue. 5. Accept the Belkin Software License Agreement by clicking the “YES” button.INSTALLING AND SETTING UP THE CARD6 7
INSTALLING AND SETTING UP THE CARD8. After the software installation is complete, click “Finish”. You are now ready toinstall the Wireless LAN notebook adapter hardware. 9. After connecting your Card, Windows will detect that new hardware has beeninstalled. Depending on which version of Windows you are using, a windowsimilar to the one pictured below will appear. Select the option that willautomatically install the software.INSTALLING AND SETTING UP THE CARD6. Select a folder where you would like to install the program files. It isrecommended that you use the default folder “C:\Program Files\Belkin\Belkin54Mbps Wireless Utility\”. Click “Next” to install the files. 7. During the install process, you will be prompted to insert your Card. Insert theCard, label side UP, into your computer’s PCMCIA slot firmly until it stops. Thepower light on the top will turn on when it is inserted properly.8 9
INSTALLING AND SETTING UP THE CARD1112. When the installation is complete, a small icon in your system tray (bottomright corner of most screens) will appear. This is your shortcut to the BelkinWLAN Monitor. It also indicates the status of your connection.Green Icon: Connected to a wireless network, good connectionYellow Icon: Connected to a wireless network, fair connectionRed Icon: No connection to a wireless networkNote: The Wireless LAN Utility icon will also appear in your Control Panel. To openthe Wireless LAN Utility, double-click on this icon.INSTALLING AND SETTING UP THE CARD10. If you are using Windows 2000 or Windows XP, you may see a screen similar to the one below. This does not mean there is a problem. Select“Continue Anyway”.11. If you are using Windows 98 or Me, you will be asked to restart yourcomputer. Select “Restart”. If you are using Windows 2000 or XP, you willsee a window similar to the one below. Click “Finish”.10 11
USING THE BELKIN WIRELESS LAN CONFIGURATION UTILITYProceed with the following instructions for configuring your network profiles. Theinstructions explain how to open the Utility and how to use it to configure anetwork profile.When you launch the Wireless LAN Utility (the Utility), you will be presentedwith the “Connect to Wireless Network” screen. The following small icon will also be present in your system tray. Once installed, the Wireless LAN Utility will automatically display when Windowsboots up.The Utility can be set to always show up in your system tray. You can hide theicon if you right-click on it in your system tray. Although no icon will bedisplayed, your preferred network will continue to be managed by the Card. Thesystem tray icon can be re-enabled from the Wireless LAN Configuration Utility,available from the Control Panel.Single-clicking on the icon in the system tray will open the window. Note: You may double-click on the Utility icon on your system tray to go directly tothe “Advanced Configuration” window.INSTALLING AND SETTING UP THE CARD12Connecting to your Wireless NetworkIf you already have a wireless router or an access point in your home or office,the Card will automatically attempt to connect to your wireless network. In mostcases, the Card will be able to connect to your network automatically. If yourwireless network is using encryption, you will need to set the encryption settingsof your Card to match that of your wireless network. For information aboutconfiguring your Card, see the next section in this manual.Uninstalling the Software and DriversIf you need to remove the software and drivers for any reason, you can easilyaccomplish this in one of two ways. You can insert the software CD and click onthe “Uninstall” option in the menu, or you can go to the Windows Control Paneland select the “Add/Remove Programs” option. The Belkin Wizard will walk youthrough the removal process.12 13
Note: Under Windows XP, clicking on the “Advanced” button for the first time willdisplay the following window. The “Use Windows to configure my wireless networksettings” option will be enabled by default. Click on the check box to disable it anduse the Belkin Wireless Network Utility instead.USING THE BELKIN WIRELESS LAN CONFIGURATION UTILITYUSING THE BELKIN WIRELESS LAN CONFIGURATION UTILITYThe Utility will automatically detect all the 802.11b and 54g wireless networks inthe area. Select an available listed network and click on the “Connect” button toconnect to that network.If the wireless network you want to connect with has WEP encryption enabled,the “Network key” text box will be active. Type the network key for that networkto connect.Click “Cancel” to exit.The “Advanced” button will allow you to view and configure more options of your Card.1514
USING THE BELKIN WIRELESS LAN UTILITY(c) Preferred NetworksDisplays a list of the networks that you have configured. You may rank thenetworks by selecting the network name in the “Preferred Networks” list thenclicking on the “Move UP” and “Move Down” buttons. Networks appearing higheron the list will be preferred over networks listed lower on the list. If a preferrednetwork is unavailable, the Card will attempt to connect to the next availablenetwork on the list.Note: You must click on the “Apply” button before any changes take into effect.(d) Preferred NetworkThe blue bubble on top of the icon for that network specifies that you arecurrently connected to that network.(e, f) Add, RemoveYou may “Add” (e) and “Remove” (f) networks from the Preferred Networks listby using these buttons.(g) System Tray IconCheck this box so that the wireless icon appears on your system tray.(h) PropertiesTo check the properties and WEP settings of the preferred network, select anetwork then click on the “Properties” button.17USING THE BELKIN WIRELESS LAN CONFIGURATION UTILITYThe Wireless Networks Tab(a) Enable RadioUse this option to toggle your wireless network radio ON or OFF. You may wantto turn the radio off while in airplanes or to conserve the battery life of yourmobile computer. When the radio is disabled, the power LED on your Card willturn off and the system tray wireless network icon will be depicted with an “X”.(b) Available NetworksThis displays a list of all available wireless networks in your area. Select anetwork by clicking on the network name or click on the “Refresh” (j) button torescan the area for available wireless networks to connect to.Once you select a network, you can click on the “Configure” (i) button. Click“OK” in the “Wireless Network Properties” box. The network name and icon willappear at the top of the “Preferred Networks” (c) list. Wait up to one minute forthe network connection to be made. Your computer is connected to the selectednetwork when you see a blue bubble on top of the icon for that network.(a)(b)(c)(d)(e)(f)(g) (h)(i)(j)(k)(l)16 17
USING THE BELKIN WIRELESS LAN UTILITYEncryption To configure a profile for a listed network that requires a WEP key: 1. After opening the Utility, select the network from the “Available networks” listand click “Configure”. 2. Select the “Data encryption (WEP enabled)” box. 3. Clear the “The key is provided for me automatically” box. 4. Type the network key in the “Network key” box. Note: You do not need to select the “Key format” or the “Key length” beforetyping the network key. These settings automatically change to the appropriatesetting as you type the network key.5. Click “OK”.Note: You must click on the “Apply” button before any changes take into effect.(l) AdvancedAllows you to filter the type of networks you want to connect to.Any Available Network: When this option is selected, the Card will attemptto connect to any available network in the area. Access points will bepreferred networks over ad-hoc networks.Access Point Networks Only: When this option is selected, the Card willattempt to connect to any available access point in the area. Ad-hocnetworks will be excluded from the list of available networks when thisoption is selected.Computer-to-Computer Networks Only: When this option is selected, theCard will attempt to connect to any available ad-hoc network in the area.Access points will be excluded from the list of available networks when thisoption is selected.USING THE BELKIN WIRELESS LAN UTILITY1818 19
USING THE BELKIN WIRELESS LAN UTILITY(e) Channel Shows the current channel the Card is operating on. When operating inInfrastructure mode, the channel is set automatically by the access point orwireless router that the Card is connected to. You cannot change the channels inInfrastructure mode. In Ad-Hoc mode, the channel can be set manually. (f) Client IP Address Shows the IP address of the your wireless client. The IP address is obtainedautomatically by default. You may set the IP address manually through WindowsNetworking Properties. (g) Network Connection TypeShows the current wireless mode the Card is operating in. There are twooperating modes: Infrastructure and Ad-Hoc. Infrastructure is the most common mode to operate in. Infrastructure mode is used when connecting yourPC to a wireless access point or to a wireless router. Ad-Hoc mode is used toconnect two or more computers together without the use of an access point orwireless router.(h) Radio StateShows whether the IP address of your wireless client is enabled or disabled. TheIP address is obtained automatically by default. You may set the IP addressmanually through Windows Networking Properties.(i) Signal Strength Displays the strength of the wireless signal from 0 to 100%. The closer to 100%,the better the signal strength is. The closer you are to a wireless router or accesspoint, the stronger the signal should be.(j) Link Quality (Noise)Displays the amount of radio interference in the environment. Lower noiseratings are optimal. USING THE BELKIN WIRELESS LAN UTILITYThe Link Status Tab(a) SSID The SSID is the wireless network name. This field shows the current SSID withwhich the Card is associated. The Card will automatically look for any wirelessnetwork in the area. To connect to a specific wireless network, you can manuallyselect the SSID of the known wireless network in the Wireless Networks tab. (b) MAC Address Shows the MAC address of the wireless network that you are connected to.(c) WEP Shows whether the network you are associated with has WEP encryption enabledor disabled.(d) Speed Displays the data rate of the current connection.(a)(b)(c)(d)(e)(g)(h) (i)(j)(f)20 21
The Site Survey TabClicking on the Site Survey tab will display a list of all available access points inyour area. The following information about each is displayed:(a) SSIDThe Service Set Identifier (wireless network name) of the access point.(b) Channel Number The current operating channel of the access point.(c) Signal StrengthThe signal strength of the related access point. (a)(b)(c)(d)(e)(f)(g)The Statistics TabThe Statistics tab shows you how much data has been sent and received and ifany errors occurred. This screen is mostly for diagnostics. Note that the numberof data packets lost is recorded. A large number of lost data packets mayindicate that there is a problem or interference in your area.USING THE BELKIN WIRELESS LAN UTILITY2322
USING THE BELKIN WIRELESS LAN UTILITYDiagnostics PageThis Page allows you to perform several diagnostic tests that are available foryour Belkin Wireless Network adapter.Control RegistersThis test verifies the read and write capabilities of the network controllerregisters by writing various values to the registers and verifying the result. Thedevice driver uses these registers to perform network functions such as sendingand receive information. If the test fails, the network adapter may not workproperly.SPROM Format VersionThis test verifies the content of the SPROM by reading a portion of the SPROMand computing the checksum. The test fails if the computed checksum isdifferent than the checksum stored in the SPROM.USING THE BELKIN WIRELESS LAN UTILITY(d) WEP Will display “Off” when encryption is disabled, “64-bit” when 64-bit encryptionis enabled, and “128-bit” when 128-bit encryption is enabled.(e) Ad-Hoc Networks OnlyCheck this box to display available ad-hoc networks only.(f) AdvancedDisplays additional information about the selected network.(g) FreezeTakes a “snapshot” of the signal strength at the time of the site survey. Clickagain to unfreeze.24 25
TROUBLESHOOTINGCannot Connect to the NetworkIf your Card appears to be functioning properly but you cannot connect to thenetwork, the problem may be that there is a mismatch between the “Networkname (SSID)” and “Wireless network key (WEP)” settings in your wireless networkproperties and the name and WEP key of the network you are trying to connectto. The network name and WEP key are case-sensitive. Verify that the spellingand case of these parameters are correct and that the settings are exactly thesame on all computers on the network.If you have verified that the spelling and case of these parameters are correctand that the settings are exactly the same on all computers on the network andyou are still unable to connect to the network, see “Performance andConnectivity Problems”.Possible SolutionWindows 2000 EnvironmentVerify that “File and Printer Sharing” is enabled onall the computers on your network. From the desktop, click the “Start” button, go to“Settings”, and click “Control Panel”. In Control Panel, double-click the “Network and Dial-up Connections” icon. In the “Network and Dial-up Connections” window,double-click the “Local Area Connection” icon. In the “Local Area Connection Status” box, click“Properties”. In the “Local Area Connection Properties” box, verifythat the “File and Printer Sharing for MicrosoftNetworks” check box is selected. If the check box iscleared, select it. If the check box is not present,click “Install”. In the “Select Network ComponentType” box, select “Service” and click “Add”. In the“Select Network Service” box, select “File and PrinterSharing for Microsoft Networks” and click “OK”. Closethe “Local Area Connection Properties” box. Close the “Local Area Connection Status” box. Close the “Network and Dial-up Connections” window. Problem or SymptomThe computers seem to becommunicating, but they donot appear in the “MyComputer” window or in the“My Network Places” window.USING THE BELKIN WIRELESS LAN UTILITYMemory TestsThis tests verifies that the network controller internal memory is functioningproperly. The test writes patterned values to the memory and reading back theresults. The test fails if an erroneous value is read back. The network controllerwill not function without its internal memory.Interrupt TestThis test verifies that the NDIS driver is able to receive interrupts from thenetwork controller.Loopback TestThis test verifies that the NDIS driver is able send packets and receive packetsfrom the network controller. LED TestThis test verifies that your 802.11 wireless networking hardware is functioningcorrectly.26 27
TROUBLESHOOTING2929Data transfer is always very slow.Computers are notcommunicating with the network.In Windows 2000, I get thefollowing error message:“Medium cable disconnected”.Also, there is a red X on my network icon in the system tray.Network performance is reallyslow when the system isconnected to both a wirelessnetwork and an active Ethernet port. Note: For Windows 2000 only.Some homes and most offices are steel-framedstructures. The steel in such buildings may interferewith your network’s radio signals, thus causing aslowdown in the data transmission rate. Try movingyour computers to different locations in the buildingto see if performance improves.If your network has an access point, check all cablesand make sure the power LED on the front of theaccess point is on.This indicates that your computer is not properlyconfigured to connect to the network. Verify that allof the wireless network properties settings arecorrect. Also, make sure that your computer isreceiving a good signal from the access point. This condition occurs if your computer has an activeEthernet port while your Card is still active andconnected to an access point. This happens becauseWindows 2000 must now handle two active networkconnections. You need to either disconnect theEthernet cable from your computer, or disable theradio on your Card. To disable the radio on your Card,right-click on the Belkin Wireless Utility icon in thesystem tray and click “Disable Radio”. Note: The radiois not automatically enabled when your computerstarts up again. To enable the radio, right-click onthe Belkin Wireless Utility icon and click “EnableRadio”.Technical SupportYou can find technical support information at www.networking.belkin.com orwww.belkin.com through the tech support area. If you want to contact technicalsupport by phone, please call 800-223-5546. TROUBLESHOOTING28The computers seem to becommunicating, but they donot appear in the “MyComputer” window or in the“My Network Places” window.(Cont.)Data transfer is sometimesvery slow.Windows XP EnvironmentVerify that “File and Printer Sharing” is enabled onall the computers on your network.From the desktop, click the “Start” button and click“Control Panel” (if you are looking at Category View,click “Switch to Classic View”). In Control Panel, double-click the “NetworkConnections” icon. In the “LAN or High-Speed Internet” area, right-click“Wireless Network Connection” and click “Properties”. In the “Wireless Network Connection Properties” box,if the “General” tab is not on top, click the “General”tab. In the “This connection uses the following items”list, verify that the “File and Printer Sharing forMicrosoft Networks” check box is selected. If thecheck box is cleared, select it. If this item is notpresent, click “Install”. In the “Select NetworkComponent Type” box, select “Service” and click“Add”. In the “Select Network Service” box, select“File and Printer Sharing for Microsoft Networks” andclick “OK”. Close the “Wireless Network ConnectionProperties” box. Close the “Network Connections” window. Microwave ovens and some cordless phones operateat the same radio frequency as the wireless networkcards. When the microwave oven or cordless phone isin use, it interferes with the wireless network.Therefore, keep computers with the Card at least 20feet away from your microwave oven and anycordless telephone that operates at a frequency of2.4GHz.28 29
INFORMATION30FCC StatementDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our soleresponsibility that the product, F5D7010to which this declaration relates,complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Caution: Exposure to Radio Frequency Radiation.The radiated output power of this device is far below the FCC radio frequency exposure limits.Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized.When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoidthe possibility of exceeding the FCC radio frequency exposure limits, human proximity to theantenna shall not be less than 0.5cm (0.2 inches) during normal operation.Federal Communications Commission NoticeThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy. If not installed and usedin accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouragedto try and correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the distance between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.ModificationsThe FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Components may void the users authority to operate the equipment.INFORMATION31Canada- Industry Canada (IC)The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class Bdigital complies with Canadian ICES-003.Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.Europe-European Union NoticeRadio products with the CE 0682 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of theEuropean Community. Compliance with this directive implies conformity to the following European Norms (in bracketsare the equivalent international standards). • EN 60950 (IEC60950) – Product Safety• EN 300 328 Technical requirement for radio equipment• ETS 300 826 General EMC requirements for radio equipment.To determine the type of transmitter, check the identification label on your Belkin product.Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low VoltageDirective (72/23/EEC) issued by the Commission of the European Community. Compliance withthese directives implies conformity to the following European Norms (in brackets are the equivalent international standards).• EN 55022 (CISPR 22) – Electromagnetic Interference• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics• EN 61000-3-3 (IEC610000) – Power Line Flicker• EN 60950 (IEC60950) – Product SafetyProducts that contain the radio transmitter are labeled with CE 0682 or CE alert marking and mayalso carry the CE logo.
INFORMATION32Belkin Corporation Limited Lifetime Product WarrantyBelkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at nocharge provided it is returned during the warranty period, with transportation charges prepaid, tothe authorized Belkin dealer from whom you purchased the product. Proof of purchase may berequired. This warranty does not apply if the product has been damaged by accident, abuse, misuse, ormisapplication; if the product has been modified without the written permission of Belkin; or ifany Belkin serial number has been removed or defaced.THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY ANDALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE.No Belkin dealer, agent, or employee is authorized to make any modification, extension, oraddition to this warranty.BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTINGFROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOTLIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, ORREPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS.Some states do not allow the exclusion or limitation of incidental or consequential damages orexclusions of implied warranties, so the above limitations of exclusions may not apply to you.This warranty gives you specific legal rights, and you may also have other rights that vary fromstate to state.33

Navigation menu