Belkin F5D8232-4V2 N1 Vision Router v2 User Manual

Belkin International, Inc. N1 Vision Router v2

User manual

Download: Belkin F5D8232-4V2 N1 Vision Router v2 User Manual
Mirror Download [FCC.gov]Belkin F5D8232-4V2 N1 Vision Router v2 User Manual
Document ID960937
Application IDBjsVgXcJ6Vh8wjVy1wWQaw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize164.09kB (2051141 bits)
Date Submitted2008-06-25 00:00:00
Date Available2008-06-25 00:00:00
Creation Date2008-06-04 15:26:32
Producing SoftwareAdobe PDF Library 8.0
Document Lastmod2008-06-12 09:40:44
Document TitleUser manual
Document CreatorAdobe InDesign CS3 (5.0.2)

User Manual
Table of Contents
1. Introduction .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Advantages of a Wireless Network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Placement of your N1 Vision .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
2. Product Overview .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Product Features .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
3. Knowing your N1 Vision .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Package Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		System Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Assistant Software System Requirements .  .  .  .  .  .  .  .  .  .  .  .
		Hardware Characteristics . .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
4. Connecting and Configuring your N1 Vision .  .  .  .  .  .  .  .  .  .  .
		Step 1: Hardware Connections – Follow the Quick
Installation Guide . .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Step 2: Set Up the N1 Vision – Using the Plug-and-Play
Router Setup .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Interactive Display .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Information Screens . .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Menu Screen .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Troubleshooting Assistant CD  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
5. Alternate Setup Method .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
6. Using the Web-Based Advanced User Interface  . .  .  .  .  .  .  .
		Changing LAN Settings .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Viewing the DHCP Client List Page .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Configuring the Wireless Network Settings  .  .  .  .  .  .  .  .  .  .  .
		Setting WPA Security . .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Setting WEP Encryption . .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Using the Access Point Mode .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Setting MAC Address Control  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Configuring the Firewall .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Using Dynamic DNS  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Utilities  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Restarting the N1 Vision  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
		Updating the Firmware  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
7. Manually Configuring Network Settings . .  .  .  .  .  .  .  .  .  .  .  .  .
8. Recommended Web Browser Settings  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
9. Troubleshooting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
10. Information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
10
14
 . 15
16
18
18
22
22
30
46
46
48
48
57
59
61
62
64
68
69
70
75
83
88
90
106
Introduction
•
Share one high-speed Internet connection with all the computers in
your home
•
Share resources, such as files and hard drives among all the
connected computers in your home
•
Share a single printer with the entire family
•
Share documents, music, video, and digital pictures
•
Store, retrieve, and copy files from one computer to another
•
Simultaneously play games online, check Internet email, and chat
Advantages of a Wireless Network
Here are some of the advantages of setting up a Belkin
Wireless Network:
•
 obility – you’ll no longer need a dedicated “computer
room”—now you can work on a networked laptop or desktop
computer anywhere within your wireless range
•
 asy installation – Belkin’s Easy Installation Wizard makes
setup simple
•
 lexibility – set up and access printers, computers, and other
networking devices from anywhere in your home
•
 asy expansion – the wide range of Belkin networking products let
you expand your network to include devices such as printers and
gaming consoles
•
 o cabling required – you can spare the expense and hassle of
retrofitting Ethernet cabling throughout the home or office
•
 idespread industry acceptance – choose from a wide range of
interoperable networking products
10
section
Thank you for purchasing the Belkin N1 Vision wireless router (the N1
Vision). Following are two short sections—the first discusses the benefits
of home networking, and the other outlines best practices that maximize
your wireless home network range and performance. Please be sure to
read through this User Manual completely, and pay special attention to
the section entitled “Placement of your N1 Wireless N1 Vision” on the next
page. By following our simple setup instructions you will be able to use
your Belkin Home Network to:
Introduction
Revolutionary N1 Wireless Technology with MIMO (N1 MIMO)
Your Belkin Vision wireless router uses a new smart-antenna technology
called Multiple Input Multiple Output (MIMO). N1 MIMO complies
with the IEEE draft 802.11n specification. It increases speed, range,
reliability, and spectral efficiency for wireless networking systems.
The element that makes Belkin’s N1 MIMO technology different from a
conventional radio is the use of multiple antennas and two simultaneous
data streams to deliver wireless transfers around your home or office. A
conventional radio uses one antenna to transmit a data stream. Belkin’s
N1 MIMO technology, on the other hand, uses three antennas. This
design helps combat distortion and interference. Belkin’s N1 MIMO is
multidimensional. It builds on one-dimensional smart-antenna technology
by simultaneously transmitting two data streams through the same channel,
which increases wireless capacity.
Another element that enhances Belkin’s N1 MIMO technology is the use of
aggregation as specified in the draft 802.11n standard. By shortening the
space between packets and combining multiple smaller packets into one
larger packet, Belkin’s N1 MIMO technology can transmit more data through
available bandwidth.
Think of conventional radio transmission as a two-lane highway. The
speed limit governs the maximum allowable flow of traffic through
that lane. Compared with conventional radios, one-dimensional
smart-antenna systems help move traffic through that lane faster
and more reliably—analogous to a four-lane road on which traffic
consistently moves at a rate closer to the speed limit. Belkin’s N1
MIMO technology helps traffic move at the speed limit and opens
more lanes—to become the superhighway in this example. The rate of
traffic flow is multiplied by the number of lanes that are opened.
Placement of your N1 Vision
Important Factors for Placement and Setup
Your wireless connection will be stronger the closer your computer is
to your N1 Vision. Typical indoor operating range for wireless devices
is between 100 and 200 feet.
In the same way, your wireless connection and performance will degrade
somewhat as the distance between your N1 Vision and connected devices
increases. This may or may not be noticeable to you. As you move further
from your N1 Vision, connection speed may decrease. Factors that can
weaken signals simply by getting in the way of your network’s radio waves
are metal appliances or obstructions, and walls.
Introduction
Note: While some of the items listed below can affect network
performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating at
its maximum effectiveness, this checklist may help.
1.
N1 Vision
Place your N1 Vision, the central connection point of your
network, as close as possible to the center of your wireless
network devices.
To achieve the best wireless network coverage for your “wireless
clients” (i.e., computers enabled by Belkin Wireless Notebook
Network Cards, Wireless Desktop Network Cards, and Wireless
USB Adapters):
2.
•
 nsure that your N1 Vision’s networking antennas are parallel
to each other, and are positioned vertically (toward the
ceiling). If your N1 Vision itself is positioned vertically, point
the antennas as much as possible in an upward direction.
•
I n multistory homes, place the N1 Vision on a floor that is as
close to the center of the home as possible. This may mean
placing the N1 Vision on an upper floor.
•
Try not to place the N1 Vision near a cordless 2.4GHz phone.
Avoid Obstacles and Interference
Avoid placing your N1 Vision near devices that may emit radio
“noise,” such as microwave ovens. Dense objects that can inhibit
wireless communication include:
• Refrigerators
• Washers and/or dryers
• Metal cabinets
• Large aquariums
• Metallic-based, UV-tinted windows
If your wireless signal seems weak in some spots, make sure that
objects such as these are not blocking the signal’s path (between
your computers and N1 Vision).
10
section
If you have concerns about your network’s performance that might be
related to range or obstruction factors, try moving the computer to a
position between five and 10 feet from the N1 Vision in order to see
if distance is the problem. If difficulties persist even at close range,
please contact Belkin Technical Support.
Introduction
3.
Cordless Phones
If the performance of your wireless network is impaired after
attending to the above issues, and you have a cordless phone:
• Try moving cordless phones away from your N1 Vision and your
wireless-enabled computers.
• Unplug and remove the battery from any cordless phone
that operates on the 2.4GHz band (check manufacturer’s
information). If this fixes the problem, your phone may
be interfering.
• If your phone supports channel selection, change the channel
on the phone to the farthest channel from your wireless
network. For example, change the phone to channel 1 and
move your N1 Vision to channel 11. See your phone’s user
manual for detailed instructions.
• If necessary, consider switching to a 900MHz or 5GHz
cordless phone.
4.
Choose the “Quietest” Channel for your Wireless Network
I n locations where homes or offices are close together, such as
apartment buildings or office complexes, there may be wireless
networks nearby that can conflict with yours.
	Use the Site Survey capabilities found in the Wireless Utility of
your wireless adapter to locate any other wireless networks that
are available (see your wireless adapter’s user manual), and move
your N1 Vision and computers to a channel as far away from
other networks as possible.
• Experiment with more than one of the available channels, in
order to find the clearest connection and avoid interference from
neighboring cordless phones or other wireless devices.
• For Belkin wireless networking products, use the detailed Site
Survey and wireless channel information included with your
wireless network card. See your network card’s user guide for
more information.
	These guidelines should allow you to cover the maximum
possible area with your N1 Vision. Should you need to cover an
even wider area, we suggest the Belkin Wireless Range
Extender/Access Point.
Introduction
Secure Connections, VPNs, and AOL
Secure connections typically require a user name and
password, and are used where security is important. Secure
connections include:
• Virtual Private Network (VPN) connections, often used to
connect remotely to an office network
• The “Bring Your Own Access” program from America Online
(AOL), which lets you use AOL through broadband provided by
another cable or DSL service
• Most online banking websites
• Many commercial websites that require a user name and
password to access your account
Secure connections can be interrupted by a computer’s power
management setting, which causes it to “go to sleep.” The
simplest solution to avoid this is to simply reconnect by rerunning
the VPN or AOL software, or by re-logging into the secure
website.
A second alternative is to change your computer’s power
management settings so it does not go to sleep; however, this
may not be appropriate for portable computers. To change your
power management setting under Windows, see the “Power
Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs,
and AOL, please review the steps above to be sure you have
addressed these issues.
For more information regarding our networking products, visit our website
at www.belkin.com/networking or call Belkin Technical Support at:
US:	877-736-5771
		 800-223-5546 ext. 2263
		 310-898-1100 ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
10
section
5.
Product Overview
Product Features
In minutes you will be able to share your Internet connection and
network your computers. The following is a list of features that make
your new Belkin N1 Vision an ideal solution for your home or small
office network.
Works with Both PCs and Mac® Computers
The N1 Vision supports a variety of networking environments
including Mac OS ® X v10.4 or v10.5; Windows ® 2000, XP, or Vista ®;
and others. All that is needed is an Internet browser and a network
adapter that supports TCP/IP (the standard language of the Internet).
Interactive Display
The interactive display on the front of the N1 Vision indicates which
features are in operation. You’ll know at-a-glance whether your N1
Vision is connected to the Internet. This feature eliminates the need
for advanced software and status-monitoring procedures typically
needed through the use of a computer.
Web-Based Advanced User Interface
You can set up the N1 Vision’s advanced functions easily through
your web browser, without having to install additional software onto
the computer. There are no disks to install or keep track of and, best
of all, you can make changes and perform setup functions from any
computer on the network quickly and easily.
NAT IP Address Sharing
Your N1 Vision employs Network Address Translation (NAT) to share
the single IP address assigned to you by your Internet Service
Provider (ISP) while saving the cost of adding additional IP addresses
to your Internet service account.
SPI Firewall
Your N1 Vision is equipped with a firewall that will protect your network
from a wide array of common hacker attacks including IP Spoofing,
Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero
length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear
Drop Attack, ICMP defect, RIP defect, and fragment flooding.
Product Overview
Integrated 10/100/1000 4-Port Switch
Universal Plug and Play (UPnP)
UPnP is a technology that offers seamless operation of voice
messaging, video messaging, games, and other applications that
are UPnP-compliant.
Support for VPN Pass-Through
If you connect to your office network from home using a VPN
connection, your N1 Vision will allow your VPN-equipped computer to
pass through the N1 Vision and to your office network.
Built-In Dynamic Host Configuration Protocol (DHCP)
Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes
for the easiest possible connection of a network. The DHCP server
will assign IP addresses to each computer automatically so there is
no need for a complicated networking setup.
Belkin Troubleshooting Assistant CD
The Troubleshooting Assistant software takes the guesswork out of
setting up your N1 Vision. This software automatically determines
your network settings for you and sets up the N1 Vision for
connection to your ISP. In a matter of minutes, your N1 Vision will be
up and you will be surfing the Internet.
Note: Troubleshooting Assistant software is compatible with Windows
2000, XP, and Vista; and Mac OS X v10.4 and v10.5. If you are using
another operating system, the N1 Vision can be set up using the
Alternate Setup Method described in this User Manual (see page 30).
10
section
The N1 Vision has a built-in, four-port network switch to allow your
wired computers to share printers, data and MP3 files, digital photos,
and much more. The switch features automatic detection so it will
adjust to the speed of connected devices. The switch will transfer
data between computers and the Internet simultaneously without
interrupting or consuming resources.
Product Overview
Integrated N1 Wireless Access Point
N1 MIMO is an exciting new wireless technology based on the draft
IEEE 802.11n specification. It employs MIMO (Multiple Input Multiple
Output) smart-antenna technology that achieves data rates of up to
300Mbps.* Actual throughput is typically lower than the connected
data rate and will vary depending on your networking environment.
*NOTE: The standard transmission rate—300Mbps—is the physical
data rate. Actual data throughput will be lower.
MAC Address Filtering
For added security, you can set up a list of MAC addresses (unique
client identifiers) that are allowed access to your network. Every
computer has its own MAC address. Simply enter these MAC
addresses into a list using the Web-Based Advanced User Interface
and you can control access to your network.
Knowing your N1 Vision
Package Contents
•
Belkin N1 Vision Wireless Router
•
Quick Installation Guide
•
Belkin Assistant CD with User Manual
•
RJ45 Ethernet Networking Cable
•
Power Supply
System Requirements
•
Broadband Internet connection such as a cable or DSL modem
with RJ45 (Ethernet) functionality
•
At least one computer with an installed network interface adapter
•
TCP/IP networking protocol installed on each computer
•
Internet browser
Assistant Software System Requirements
•
A computer running Windows 2000, XP, or Vista;
or Mac OS X v10.4 or v10.5
•
Minimum 1GHz processor and 512MB RAM
•
Internet browser
10
section
Knowing your N1 Vision
Hardware Characteristics
The N1 Vision has been designed to be placed on a desktop. All of
the cables exit from the BACK of the N1 Vision for better organization
and utility. The N1 Vision’s interactive display is easily visible on
the FRONT of the N1 Vision to provide you with information about
network activity and status.
(D)
(A)
(B)
(C)
10
Knowing your N1 Vision
A.
The interactive display is on the front of the N1 Vision, which
indicates which features are in operation.
4-Way Keypad
The keypad enables the movement of the up, down, left, and right
function that may apply to the screen shown in the interactive
display.
C.
D.
OK Button
For most screens in the interactive display, the “OK” button will
activate the desired feature.
Menu Button
Pushing this button will take you back to the Menu Screen within
the interactive display.
10
11
section
B.
Interactive Display
Knowing your N1 Vision
(H)
(G)
(E)
(F)
12
Knowing your N1 Vision
E.
Connections to Wired Computers – Gray Ports
F.
Connection to Modem – Yellow Port
This port is for connection to your cable or DSL modem. Use the
cable that was provided with your modem to connect the modem
to this port. Use of a cable other than the one supplied with the
cable modem may not work properly.
G.
Reset Button
The “Reset” button is used in rare cases when the N1 Vision
may function improperly. Resetting the N1 Vision will restore the
N1 Vision’s normal operation while maintaining the programmed
settings. You can also restore the factory default settings by
using the “Reset” button. Use the restore option in instances
where you may have forgotten your custom password.
Press and hold the “Reset” button for at least three seconds,
but no longer than five seconds. The LCD on the N1 Vision
will indicate that it is resetting. When the N1 Vision Network
Status screen appears, the reset is complete.
Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
then release it. The LCD on the N1 Vision will indicate that
it is restoring factory defaults. When the N1 Vision Network
Status screen appears, the restore is complete.
H.
10
i. 	Resetting the N1 Vision
ii.
Power Jack – Black
Connect the included 12V/1.0A DC power supply to this jack.
13
section
Connect your wired (non-wireless) computers to these ports.
These ports are RJ45, 10/100/1000 auto-negotiation, autouplinking ports for standard UTP category 5 or 6 Ethernet cable.
The ports are labeled 1 through 4. Use the gray cable provided to
connect your computer to any one of these ports.
Connecting and Configuring your N1 Vision
Verify the contents of your box. You should have the following:
•
Belkin N1 Vision Wireless Router
•
Quick Installation Guide
•
Belkin Assistant CD with User Manual
•
RJ45 Ethernet Networking Cable
•
Power Supply
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port. Many modems have both an RJ45 Ethernet port and a USB
connection. If you have a modem with both Ethernet and USB, and
are using the USB connection at this time, you will be instructed to
use the RJ45 Ethernet port during the installation procedure. If your
modem has only a USB port, you can request a different type of
modem from your ISP, or you can, in some cases, purchase a modem
that has an RJ45 Ethernet port on it.
Ethernet
USB
14
Connecting and Configuring your N1 Vision
Step 1
Hardware Connections – Follow the Quick Installation
Guide (QIG)
modem
router
back of computer
WWW
routersetup
LAN
existing cable
new cable from package
A.
Plug the power supply into the wall outlet.
B.
Plug the other end into the black port on the N1 Vision.
C.
Find the cable connecting the modem and computer**. Unplug
it from the computer and plug it into the yellow port on the
N1 Vision.
**If you are replacing an existing router, find the cable connecting
the modem and old router. Disconnect it from the old router and
plug it into the yellow port on your Belkin N1 Vision.
D.
Connect the new cable (provided in the box) to any gray port on
the N1 Vision.
E.
Connect the other end of that cable to a networking (Ethernet)
port on your computer.
F.
Rotate the antennas up.
15
10
section
WAN
Connecting and Configuring your N1 Vision
Step 2
 et Up the N1 Vision – Using the Plug-and-Play
Router Setup
A.
Open a web browser on that
computer. The Belkin Router
Setup Wizard should appear
automatically. If it doesn’t,
enter “routersetup” into the
web-address field and press the
“Enter” key on your keyboard.
B.
The Belkin Plug-and-Play Setup
Wizard should automatically
appear. Verify that you have
completed all QIG steps by
clicking “Begin” to continue.
C.
Select the country you are located
in by using the drop-down box.
Click “Next” to continue.
D.
Select your Internet Service
Provider (ISP) by using the
drop-down box. Click “Next” to
continue.
16
Connecting and Configuring your N1 Vision
E.
If your Internet account requires
a user name and password, you
will be taken to the screen below
to enter this information. Click
“Next” to save and continue.
F.
The N1 Vision will now check for
your Internet connection.
G.
You will see the Congratulations
screen when your N1 Vision can
connect to the Internet. You have
finished installing your new Belkin
N1 Vision and can begin surfing
by opening another browser
and going to any website. You
may also choose to change your
network name, set up a wireless
security key, or enable the guest
mode from this screen.
Options
1.
Network Name – This is the name of the N1 Vision.
2.
Network Key Create a wireless security WPA key by typing any 8
to 63 alphanumeric characters in length. Any wireless devices will
need this key to connect to the N1 Vision.
3.
Guest Mode – When enabled, this mode will create a new
network to which guest users can connect that will separate them
from access to your other network and connected devices.
17
10
section
Connecting and Configuring your N1 Vision
Interactive Display
The N1 Vision’s interactive display is a powerful instrument for
viewing your network information. The display can provide essential
router-status information such as the state of the Internet connection
to details such as each device usage and speed of the Internet
connection. Within the numerous features of the display, there are
also built-in help guides and tips for troubleshooting.
Startup Screen
Once the N1 Vision has been plugged
in, the “Startup” screen will appear to
indicate that the N1 Vision is currently
in the boot-up state.
Information Screens
After the N1 Vision has finished starting up and the Plug-and-Play
Router Setup process has been completed, the first in a series of
informational screens will appear. These screens let you view your
network status. Push the right key (>) or the left key (<) to cycle
through them. The following outlines the details on each.
(1)
(2)
(3)
(4)
(5)
(6)
A.
Network Status
Once the N1 Vision has been
plugged in, the “Startup” screen
will appear to indicate that the
N1 Vision is currently in the
boot-up state.
18
Connecting and Configuring your N1 Vision
1.
Internet Connection
This icon shows you when the N1 Vision is connected to
the Internet.
No Internet connection has
been detected
Solid White
N1 Vision is connected to the Internet
Blinking White
Internet connection was detected;
N1 Vision is not currently able to
connect to the Internet
Modem Connection
This icon shows you when the N1 Vision is connected to
the modem.
3.
OFF
Not connected to a modem
Solid White
N1 Vision is connected to modem and
functioning properly
Blinking White
Problem with modem (such as boot
failure, etc.)
N1 Vision (Router) Wireless State
This icon indicates whether or not wireless is enabled.
4.
N1 Vision showing wireless
connection (with curved-lines
illustration)
N1 Vision is ON with wireless
enabled and ready for use with
wireless and wired devices
N1 Vision showing wired
connection (without curvedlines illustration)
N1 Vision is ON with wireless
disabled and ready for use
with only wired devices
Wired Computers
This icon indicates if there are any wired connections present.
OFF
Wired device not present
Solid White
Wired device(s) connected to the
N1 Vision
19
10
section
2.
OFF
Connecting and Configuring your N1 Vision
5.
Wireless Computers
This icon represents if there are any wireless
connections present.
6.
OFF
Wireless device is not present
Solid White
Wireless device(s) is connected to the
N1 Vision
Security
This icon indicates wireless security.
OFF
Wireless security is OFF
Solid White
Wireless security is ON
B.
Broadband Download
Speedometer
This screen will display the
current download speed being
transferred through the Internet
connection. The speed will be
measured on the speedometer
against the fastest speed that has
been measured by the N1 Vision
since being activated.
C.
Broadband Upload/Download
Speedometer
This screen will display the
current upload and download
speed being transferred through
the Internet connection. The
speed will be measured on
the speedometer against the
fastest speed that has been
measured by the N1 Vision since
being activated.
20
Connecting and Configuring your N1 Vision
D.
Usage Past 24 Hours
This screen displays all devices
currently connected to the N1
Vision and their broadband usage
over a period of 24 hours.
F.
G.
Guest Access Status
This screen indicates whether
Guest Access is enabled or
disabled. For more information on
the Guest-Access feature, please
see the “Using the Web-Based
Advanced User Interface” section
in this User Manual.
Date & Time
This screen displays the date and
time. To toggle between standard
and military time, push the up or
down key.
21
10
section
E.
Connections/Speed
This screen displays all devices
currently connected to the N1
Vision and the speed of the
broadband data that is being
downloaded or uploaded per
each device.
Connecting and Configuring your N1 Vision
Menu Screen
Push the “Menu” button to open the
display’s Menu options. The Menu
option allows you to enable features
within the N1 Vision. The following
outlines the details of each feature
within the Menu section.
A.
Wireless Security
Select Wireless Security by pressing the “OK” button to view
these options. From the Wireless Security options, the choices
available are listed below.
Guest Access – Select this option to
enable a separate network to allow
guests to connect to the Internet while
keeping them away from accessing
your network, computers, and
private files.
Select “Turn On” to enable Guest
Access. To enable the Guest-Access
mode, you will need to enable Wi-Fi
Protected AccessTM (WPATM) on
your private network first. To do so,
please see the “Setting WPA Security”
section in this User Manual.
To view the Guest Access network
name and password, select the “Show
login info” option.
22
Connecting and Configuring your N1 Vision
Push Button Security – Select this
option if you would like to set up your
computers or devices using the Wi-Fi
Protected Setup TM (WPS) standard.
Using WPS is not a requirement to
connect to the N1 Vision.
B.
Help and Tips
Select this option for additional
information.
10
C.
Power Save
Select this option to conserve the
display’s power or if you prefer
to turn off graphics. When power
save is ON, the display will turn
off within two minutes after any
user interaction.
23
section
To make a WPS connection, select
the “New Connection” option. To do
so, you must have WPS enabled on
the computer or device connecting to
the N1 Vision. You will need to push
the WPS button in your computer or
device within two minutes.
Connecting and Configuring your N1 Vision
Troubleshooting Assistant CD
Belkin has provided our Assistant software to make installing your
N1 Vision a simple and easy task. You can use it to get your N1
Vision up and running in minutes. The Assistant software requires
that your Windows 2000, XP, or Vista computer be connected
directly to your cable or DSL modem and that the Internet
connection is active and working at the time of installation. If it
is not, you must use the “Alternate Setup Method” section in this
User Manual to configure your N1 Vision. Additionally, if you are
using an operating system other than Windows 2000, XP, or Vista,
you must set up the N1 Vision using the “Alternate Setup Method”
section in this User Manual.
A.
Shut down any programs that are running on your computer
at this time.
Turn off any firewall or Internet-connection-sharing software on
your computer.
B.
Insert the CD into your computer. The Troubleshooting Assistant
will automatically appear on your computer’s screen within 15
seconds. Click on “Go” to run the Troubleshooting Assistant.
Follow the instructions there.
IMPORTANT: Run the Troubleshooting Assistant from the computer
that is directly connected to the Router from Step 1 – B.
24
Connecting and Configuring your N1 Vision
Select your language of choice and
click “Go” to run the
Troubleshooting Assistant.
Confirmation Screen
Verify that you have completed all QIG
steps by checking the box to the right
of the arrow. Click “Next” to continue.
Progress Screen
Troubleshooting Assistant will show
you a progress screen each time a
step in the setup has been completed.
25
10
section
Note for Windows Users: If the
Troubleshooting Assistant does
not start up automatically, select
your CD-ROM drive from “My
Computer” and double-click on the
file named “Setup.exe” to start the
Troubleshooting Assistant.
Connecting and Configuring your N1 Vision
1.1 	C hecking Settings
The Troubleshooting Assistant
will now examine your computer’s
network settings and gather
information needed to complete
the N1 Vision’s connection to
the Internet.
1.2 	Verifying Hardware Connections
The Troubleshooting Assistant
will now verify your hardware
connection.
1.3 	N aming your Wireless Network
The Troubleshooting Assistant
will display the default wireless
network name or Service Set
Identifier (SSID). This is the name
of your wireless network to which
your computers or devices with
wireless network adapters will
connect. You can either use the
default or change it to something
unique. Write down this name
for future reference. Click “Next”
to continue.
26
Connecting and Configuring your N1 Vision
1.4 	R equesting Internet Account
1.5 Configuring the N1 Vision
The Troubleshooting Assistant will
now configure your N1 Vision by
sending data to the N1 Vision
and restarting it. Wait for the
on-screen instructions.
Note: Do not disconnect any
cable or power off the N1 Vision
while the N1 Vision is rebooting.
Doing so will render your
N1 Vision inoperable.
10
27
section
Info (if needed)
If your Internet account requires
a login and password, you will
be prompted with a screen similar
to the one on the left. Select
your country or ISP from the
drop-down boxes.
Connecting and Configuring your N1 Vision
1.6 Checking Internet Connection
We are almost done. The
Troubleshooting Assistant will
now check your connection to
the Internet.
Congratulations
You have finished installing your new
Belkin N1 Vision. You will see the
Congratulations screen when your N1
Vision can connect to the Internet.
You can begin surfing by opening your
browser and going to any website.
You can use the Troubleshooting
Assistant to set up your other wired
and wireless computers to connect to
the Internet by clicking “Next”. If you
decide to add computers to your N1
Vision later, select “Exit the Assistant”
and then click “Next”.
Troubleshooting
If the Troubleshooting Assistant is not
able to connect to the Internet, you will
see this screen. Follow the on-screen
instructions to go through the
troubleshooting steps.
28
Connecting and Configuring your N1 Vision
1.7 Optional: Assistance Connecting
Congratulations
Once you have verified that your other
wired and wireless computers are
properly connected, your network is set
up and working. You can now surf the
Internet. Click “Next” to return to the
main menu.
10
29
section
Other Computers
This optional step will help you
to connect additional wired
and wireless computers to your
network. Follow the on-screen
instructions.
Alternate Setup Method
Step 1
Hardware Connections – Follow the
Quick Installation Guide (QIG)
See the QIG or Step 1: Hardware Connections from the
previous section.
Step 2
Set your Computer’s Network Settings to Work
with a DHCP Server
See the section in this User Manual called “Manually Configuring
Network Settings” for directions.
Step 3
Configuring the N1 Vision Using the Web-Based
Advanced User Interface
Using your Internet browser, you can access the N1 Vision’s
Web-Based Advanced User Interface. In your browser, type
“192.168.2.1” (do not type in anything else such as “http://” or
“www”). Then press the “Enter” key.
30
Alternate Setup Method
Logging into the N1 Vision
You will see the N1 Vision’s home page in your browser window.
The home page is visible to any user who wants to see it. To make
any changes to the N1 Vision’s settings, you have to log in. Clicking
the “Login” button or clicking on any one of the links on the home
page will take you to the login screen. The N1 Vision ships with no
password entered. In the login screen, leave the password blank and
click the “Submit” button to log in.
Logging out of the N1 Vision
One computer at a time can log into the N1 Vision for the purposes
of making changes to the settings of the N1 Vision. Once a user has
logged in to make changes, there are two ways that the computer
can be logged out. Clicking the “Logout” button will log the
computer out. The second method is automatic. The login will time
out after a specified period of time. The default login time-out is
10 minutes. This can be changed from one to 99 minutes. For more
information, see the section in this manual titled “Changing the Login
Time-Out Setting”.
Understanding the Web-Based Advanced User Interface
The home page (shown on the next page) is the first page you will see
when you access the Advanced User Interface (UI). The home page
shows you a quick view of the N1 Vision’s status and settings. All
advanced setup pages can be reached from this page.
31
10
section
Alternate Setup Method
(2)
(10)
(5) (4)
(3)
(9)
(6)
(1)
(7)
(8)
1.
Quick-Navigation Links
You can go directly to any of the N1 Vision’s advanced UI
pages by clicking directly on these links. The links are divided
into logical categories and grouped by tabs to make finding a
particular setting easier to find. Clicking on the purple header of
each tab will show you a short description of the tab’s function.
2.
Home Button
The home button is available in every page of the UI. Pressing
this button will take you back to the home page.
3.
Internet-Status Indicator
This indicator is visible in all pages of the N1 Vision, indicating
the connection status of the N1 Vision. When the indicator says
“Connected” in gray, the N1 Vision is connected to the Internet.
When the N1 Vision is not connected to the Internet, the indicator
will read “No Connection” in red. The indicator is automatically
updated when you make changes to the settings of the N1 Vision.
4.
Login/Logout Button
This button enables you to log in and out of the N1 Vision with
the press of one button. When you are logged into the N1 Vision,
this button will change to read “Logout”. Logging into the N1
Vision will take you to a separate login page where you will need
32
Alternate Setup Method
to enter a password. When you are logged into the N1 Vision,
you can make changes to the settings. When you are finished
making changes, you can log out of the N1 Vision by clicking the
“Logout” button. For more information about logging into the N1
Vision, see the section called “Logging into the N1 Vision”.
5.
LAN Settings
Features
Shows the status of the N1 Vision’s NAT, firewall, and wireless
features. Changes can be made to the settings by clicking on any
one of the links or by clicking the quick-navigation links on the
left side of the screen.
8.
Internet Settings
Shows the settings of the Internet/WAN side of the N1 Vision that
connects to the Internet. Changes to any of these settings can
be made by clicking on the links or by clicking on the “Internet/
WAN” quick-navigation link on the left side of the screen.
9.
The “Help” button gives you access to the N1 Vision’s help
pages. Help is also available on many pages by clicking “more
info” next to certain sections of each page.
Shows you the settings of the Local Area Network (LAN) side of
the N1 Vision. Changes can be made to the settings by clicking
on any one of the links (IP Address, Subnet Mask, DHCP Server)
or by clicking the “LAN” quick-navigation link on the left side of
the screen.
7.
Version Info
Shows the firmware version, boot-code version, hardware
version, and serial number of the N1 Vision.
10. Page Name
The page you are on can be identified by this name. This User
Manual will sometimes refer to pages by name. For instance
“LAN > LAN Settings” refers to the “LAN Settings” page.
33
10
section
6.
Help Button
Alternate Setup Method
Step 4
 onfiguring your N1 Vision for Connection to your
Internet Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your N1 Vision to
connect to your Internet Service Provider (ISP). The N1 Vision is
capable of connecting to virtually any ISP’s system provided you have
correctly configured the N1 Vision’s settings for your ISP’s connection
type. Your ISP connection settings are provided to you by your ISP.
To configure the N1 Vision with the settings that your ISP gave you,
click “Connection Type” (A) on the left side of the screen. Select
the connection type you use. If your ISP gave you DNS settings,
clicking “DNS” (B) allows you to enter DNS address entries for ISPs
that require specific settings. Clicking “MAC Address” (C) will let you
clone your computer’s MAC address or type in a specific WAN MAC
address, if required by your ISP. When you have finished making
settings, the “Internet Status” indicator will read “connection OK” if
your N1 Vision is set up properly.
(A)
(B)
(C)
34
Alternate Setup Method
Setting your Connection Type
From the “Connection Type” page, you can select the type of connection
you use. Select the type of connection you use by clicking the button (1)
next to your connection type and then clicking “Next” (2).
(1)
(2)
10
35
section
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection
Type to Dynamic IP
A dynamic connection type is the most common connection type found with
cable modems. Setting the connection type to “dynamic” in many cases is
enough to complete the connection to your ISP. Some dynamic connection
types may require a host name. You can enter your host name in the space
provided if you were assigned one. Your host name is assigned by your ISP.
Some dynamic connections may require that you clone the MAC address of
the PC that was originally connected to the modem.
1.
Host Name
This space is provided to enter a host name that needs to be
visible to your ISP. Enter your host name here and click “Apply
Changes” (3). If your ISP did not assign you a host name, or you
are not sure, leave this blank.
2.
Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the
service, you can enter a specific MAC address or clone the
current computer’s MAC address through this link.
(1)
(3)
(2)
36
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP address connection type is less common than other
connection types. If your ISP uses static IP addressing, you will
need your IP address, subnet mask, and ISP gateway address. This
information is available from your ISP or on the paperwork that your
ISP left with you. Type in your information, then click “Apply Changes”
(5). After you apply the changes, the Internet Status indicator will
read “connection OK” if your N1 Vision is set up properly.
IP Address
Enter the IP address that has been provided by your ISP here.
2.
Subnet Mask
Enter the subnet mask that has been provided by your ISP here.
3.
ISP Gateway Address
Enter the gateway address that has been provided by your ISP here.
4.
My ISP Provides More Than One Static IP Address
If your ISP assigns you more than one static IP address, your N1
Vision is capable of handling up to five static WAN IP addresses.
Select “My ISP provides more than one static IP address” and
enter your additional addresses.
10
(1)
(2)
(3)
(4)
(5)
37
section
1.
Alternate Setup Method
Setting your ISP Connection Type to PPPoE
Most DSL providers use PPPoE as the connection type. If you use a
DSL modem to connect to the Internet, your ISP may use PPPoE to
log you into the service. If you have an Internet connection in your
home or small office that doesn’t require a modem, you may also
use PPPoE.
Your connection type is PPPoE if:
1) Y
 our ISP gave you a user name and password, which is required
to connect to the Internet.
2) Y
 our ISP gave you software such as WinPOET or Enternet300
that you use to connect to the Internet.
3) Y
 ou have to double-click on a desktop icon other than your
browser to get on the Internet.
38
Alternate Setup Method
(1)
(2)
(3)
(5)
1.
2.
User Name
This space is provided to type in your user name that was
assigned by your ISP.
Password
Type in your password and retype it into the “Retype Password”
box to confirm it.
3.
Service Name
A service name is rarely required by an ISP. If you are not sure if
your ISP requires a service name, leave this blank.
4.
MTU
The MTU setting should never be changed unless your ISP gives
you a specific MTU setting. Making changes to the MTU setting
can cause problems with your Internet connection including
disconnection from the Internet, slow Internet access, and
problems with Internet applications working properly.
5.
Disconnect after X...
The “Disconnect” feature is used to automatically disconnect the
N1 Vision from your ISP when there is no activity for a specified
period of time. For instance, placing a check mark next to this
option and entering “5” into the minute field will cause the N1
Vision to disconnect from the Internet after five minutes of no
Internet activity. This option should be used if you pay for your
Internet service by the minute.
39
10
section
(4)
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European countries only]
Some ISPs require a connection using PPTP protocol, a type of
connection most common in European countries. This sets up a direct
connection to the ISP’s system. Type in the information provided
by your ISP in the space provided. When you have finished, click
“Apply Changes” (9). After you apply the changes, the Internet
Status indicator will read “connection OK” if your N1 Vision is set
up properly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
1.
PPTP Account
Enter the PPTP account name that has been provided by your
ISP here.
2.
PPTP Password
Type in your password and retype it into the “Retype Password”
box to confirm it.
3.
Host Name
Enter the host name that has been provided by your ISP here.
4.
Service IP Address
Enter the service IP address that has been provided by your ISP here.
5.
My IP Address
Enter the IP address that has been provided by your ISP here.
40
Alternate Setup Method
6.
My Subnet Mask
7.
Connection ID (optional)
Enter the subnet mask that has been provided by your ISP here.
If your ISP has provided you with a connection ID, enter it here.
If not, you can leave this blank.
8.
Disconnect after X....
10
41
section
The “Disconnect” feature is used to automatically disconnect the
N1 Vision from your ISP when there is no activity for a specified
period of time. For instance, placing a check mark next to this
option and entering “5” into the minute field will cause the N1
Vision to disconnect from the Internet after five minutes of no
Internet activity. This option should be used if you pay for your
Internet service by the minute.
Alternate Setup Method
Setting your Connection Type if you are a Telstra® BigPond User
[Australia Only]. Your user name and password are provided to you by
Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu (1) will automatically fill in your login server
IP address. If your login server address is different than one provided
here, you may manually enter the login server IP address by placing a
check in the box next to “User decide login server manually” (4) and
type in the address next to “Login Server” (5). When you have entered
all of your information, click “Apply Changes” (6). After you apply the
changes, the Internet Status indicator will read “connection OK” if
your N1 Vision is set up properly.
(1)
(2)
(3)
(4)
(5)
(6)
1.
2.
Select your State
Select your state from the drop-down menu (1). The “Login
Server” box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See “User decide login server manually” (4).
User Name
Type in the user name that has been provided by your ISP here.
3.
Password
Type in your password and retype it into the “Retype Password”
box to confirm it.
42
Alternate Setup Method
4.
User Decide Login Server Manually
If your login server IP address is not available in the “Select Your
State” drop-down menu (1) , you may manually enter the login
server IP address by placing a check in the box next to “User
decide login server manually” and type in the address next to
“Login Server” (5).
Setting Custom Domain Name Server (DNS) Settings
(1)
(2)
43
10
section
A “Domain Name Server” is a server located on the Internet that translates
Universal Resource Locaters (URLs) like “www.belkin.com” to IP addresses.
Many Internet Service Providers (ISPs) do not require you to enter this
information into the N1 Vision. The “Automatic from ISP” box (1) should
be checked if your ISP did not give you a specific DNS address. If you are
using a static IP connection type, then you may need to enter a specific
DNS address and secondary DNS address for your connection to work
properly. If your connection type is dynamic or PPPoE, it is likely that you
do not have to enter a DNS address. Leave the “Automatic from ISP” box
checked. To enter the DNS address settings, uncheck the “Automatic from
ISP” box and enter your DNS entries in the spaces provided. Click “Apply
Changes” (2) to save the settings.
Alternate Setup Method
Configuring your WAN Media Access Controller (MAC) Address
All network components including cards, adapters, and routers, have
a unique “serial number” called a MAC address. Your Internet Service
Provider (ISP) may record the MAC address of your computer’s adapter
and only let that particular computer connect to the Internet service.
When you install the N1 Vision, its own MAC address will be “seen” by
the ISP and may cause the connection not to work. Belkin has provided
the ability to clone (copy) the MAC address of the computer into the N1
Vision. This MAC address, in turn, will be seen by the ISP’s system as
the original MAC address and will allow the connection to work. If you
are not sure whether your ISP needs to see the original MAC address,
simply clone the MAC address of the computer that was originally
connected to the modem. Cloning the address will not cause any
problems with your network.
Cloning your MAC Address
To clone your MAC address, make sure that you are using the computer
that was ORIGINALLY CONNECTED to your modem before the N1 Vision
was installed. Click the “Clone” button (1). Click “Apply Changes” (3).
Your MAC address is now cloned to the N1 Vision.
Entering a Specific MAC Address
In certain circumstances you may need a specific WAN MAC address.
You can manually enter one in the “MAC Address” page. Type in a
MAC address in the spaces provided (2) and click “Apply Changes” (3)
to save the changes. The N1 Vision’s WAN MAC address will now be
changed to the MAC address you specified.
(1)
(3)
44
(2)
Alternate Setup Method
Using your Internet browser, you can access the N1 Vision’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (do not
type in anything else such as “http://” or “www”) then press the
“Enter” key.
You will see the N1 Vision’s home page in your browser window.
Clicking on the header of the LAN tab (1) will take you to the LAN tab’s
header page. A quick description of the functions can be found here. To
view the settings or make changes to any of the LAN settings, click on
“LAN Settings” (2) or to view the list of connected computers, click on
“DHCP client list” (3).
(1)
(2)
(3)
10
45
section
Viewing the LAN Settings
Using the Web-Based Advanced User Interface
Changing LAN Settings
All settings for the internal LAN setup of the N1 Vision can be viewed
and changed here.
(1)
(2)
(3)
(4)
(5)
(6)
1.
IP Address
The “IP address” is the internal IP address of the N1 Vision. The
default IP address is “192.168.2.1”. To access the advanced setup
interface, type this IP address into the address bar of your browser.
This address can be changed if needed. To change the IP address,
type in the new IP address and click “Apply Changes”. The IP
address you choose should be a non-routable IP. Examples of a
non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
2.
Subnet Mask
There is no need to change the subnet mask. This is a unique,
advanced feature of your Belkin N1 Vision. It is possible to change
the subnet mask if necessary; however, do NOT make changes to
the subnet mask unless you have a specific reason to do so. The
default setting is “255.255.255.0”.
46
Using the Web-Based Advanced User Interface
3.
DHCP Server
The DHCP server function makes setting up a network very easy
by assigning IP addresses to each computer on the network
automatically. The default setting is “On”. The DHCP server can
be turned OFF if necessary; however, in order to do so you must
manually set a static IP address for each computer on your network.
To turn off the DHCP server, select “Off” and click “Apply Changes”.
4.
IP Pool
5.
Lease Time
The length of time the DHCP server will reserve the IP address
for each computer. We recommend that you leave the lease
time set to “Forever”. The default setting is “Forever”, meaning
that any time a computer is assigned an IP address by the
DHCP server, the IP address will not change for that particular
computer. Setting lease times for shorter intervals such as one
day or one hour frees IP addresses after the specified period of
time. This also means that a particular computer’s IP address
may change over time. If you have set any of the other advanced
features of the N1 Vision such as DMZ or client IP filters, these
are dependent on the IP address. For this reason, you will not
want the IP address to change.
6.
Local Domain Name
The default setting is “Belkin”. You can set a local domain name
(network name) for your network. There is no need to change
this setting unless you have a specific advanced need to do so.
You can name the network anything you want such as
“MY NETWORK”.
47
10
section
The range of IP addresses set aside for dynamic assignment
to the computers on your network. The default is 2–100 (99
computers). If you want to change this number, you can do so
by entering a new starting and ending IP address and clicking on
“Apply Changes”. The DHCP server can assign 100 IP addresses
automatically. This means that you cannot specify an IP address
pool larger than 100 computers. For example, starting at 50
means you have to end at 150 or lower so as not to exceed the
100-client limit. The starting IP address must be lower in number
than the ending IP address.
Using the Web-Based Advanced User Interface
Viewing the DHCP Client List Page
You can view a list of the computers (known as clients), which are
connected to your network. You are able to view the IP address (1) of
the computer, the host name (2) (if the computer has been assigned
one), and the MAC address (3) of the computer’s network interface
card (NIC). Pressing the “Refresh” (4) button will update the list. If
there have been any changes, the list will be updated.
(1)
(2)
(3)
(4)
Configuring the Wireless Network Settings
The “Wireless” tab lets you make changes to the wireless network
settings. From this tab you can make changes to the wireless network
name or Service Set Identifier (SSID), operating channel, encryption
security settings, and configure the N1 Vision to be used as an
access point.
48
Using the Web-Based Advanced User Interface
Changing the Wireless Network Name (SSID)
(1)
(2)
Note: Please periodically check for new N1 Vision firmware updates
from the “Utilities > Firmware update” page. Newer firmware can fix
problems, add wireless features, and/or improve wireless performance
(see page 75).
49
10
section
To identify your wireless network, a name called the SSID is used.
The SSID is your network name. The default network name of the N1
Vision is “Belkin N1 Wireless” followed by six digits that are unique to
your N1 Vision. Your network name will look something like
“Belkin_N1_Wireless_123456”. You can change this to anything you
choose, or you can leave it unchanged. Keep in mind, if you decide
to change your wireless network name, and there are other wireless
networks operating in your area, your network name needs to be
different from other wireless networks that may be operating in your
area. To change the SSID, type in the SSID that you want to use
in the SSID field (1) and click “Apply Changes” (2). The change is
immediate. If you make a change to the SSID, your wireless-equipped
computers may also need to be reconfigured to connect to your new
network name. Refer to the documentation of your wireless network
adapter for information on making this change.
Using the Web-Based Advanced User Interface
Changing the Wireless Channel
There are a number of operating channels from which you can
choose—in the United States, there are 11 and in the United Kingdom
(and most of Europe), there are 13. In a small number of other countries,
there are other channel requirements. Your N1 Vision is configured to
operate on the proper channels for the country in which you reside. The
channel can be changed if needed. If there are other wireless networks
operating in your area, your network should be set to operate on a
channel that is different than the other wireless networks.
Using the Wireless Mode Switch
This switch allows you to set the N1 Vision’s wireless modes. There are
several modes.
Note: Some modes may require firmware updates to be enabled.
1) 8 02.11b+g+n
Setting the N1 Vision to this mode will allow 802.11b-, 802.11g-, and
802.11n-compliant devices to join the network.
2) O
 ff
This mode will turn OFF the N1 Vision’s access point, so no
wireless devices can join the network. Turning off the wireless
function of your N1 Vision is a great way to secure your network
when you are away from home for a long period of time, or don’t
want to use the wireless feature of the N1 Vision at a certain time.
IEEE 802.11b or 802.11g operation of this product in the U.S.A.
is firmware-limited to channels 1 through 11.
50
Using the Web-Based Advanced User Interface
Using the Bandwidth Switch
This switch allows you to set the N1 Vision’s wireless bandwidth modes.
There are several modes available:
1) 2 0MHz only
Setting the N1 Vision to this mode allows only 20MHz operation.
This mode is compatible with N1, draft 802.11n-, 802.11g-, and
802.11b-compliant devices, but will limit N1, draft 802.11n-compliant
devices’ bandwidth by half. Reducing bandwidth to 20MHz-only
operation might solve some wireless problems.
2) 2 0MHz/40MHz Auto
Setting the N1 Vision to this mode allows it to switch automatically
between 20MHz and 40MHz operation. This mode enables 40MHz
operation, to maximize speed for N1, draft 802.11n-compliant
devices when conditions permit. When a legacy 802.11g
access point is presented and occupies an adjacent secondary
channel, the N1 Vision automatically reverts to 20MHz operation
to maximize compatibility. We recommend using this as the
default mode.
51
10
section
Using the Web-Based Advanced User Interface
Using the Broadcast SSID Feature
Note: This advanced feature should be employed by advanced users
only. For security, you can choose not to broadcast your network’s SSID.
Doing so will keep your network name hidden from computers that are
scanning for the presence of wireless networks. To turn off the broadcast
of the SSID, remove the check mark from the box next to “Broadcast
SSID”, and then click “Apply Changes”. The change is immediate. Each
computer now needs to be set to connect to your specific SSID; an SSID
of “ANY” will no longer be accepted. Refer to the documentation of your
wireless network adapter for information on making this change.
Protected Mode Switch
Protected mode ensures proper operation of N1, draft 802.11n-compliant
devices on your wireless network when 802.11g or 802.11b devices
are present or when there is heavy 802.11g or 802.11b traffic in the
operating environment. Use protected mode if your network consists of
a mix of Belkin N1 Wireless Cards and 802.11g or 802.11b cards on your
network. If you are in an environment that includes little to no 802.11g
or 802.11b wireless network traffic, you will achieve the best N1 wireless
performance with protected mode OFF. Conversely, in an environment
with HEAVY 802.11g or 802.11b traffic or interference, you will achieve
the best N1 wireless performance with protected mode ON. This will
ensure N1 wireless performance is not affected.
Changing the Wireless Security Settings
Your N1 Vision is equipped with the latest security standard called
Wi-Fi Protected Access ™ 2 (WPA2 ™) and the legacy security standard
called Wired Equivalent Privacy (WEP). Your N1 Vision also supports
the Wi-Fi Protected Setup (WPS) specification, which simplifies the
setup of a wireless network. WPS uses familiar methodologies, such
as typing in a Personal Identification Number (PIN) or pushing a
button, to enable users to automatically configure network names
and strong WPA/WPA2 data encryption and authentication. By
default, your N1 Vision does not ship with security enabled. You may
automatically configure the security settings using WPS. To change
the security settings manually, you will need to determine which
standard you want to use. To access the security settings, click
“Security” on the “Wireless” tab.
52
Using the Web-Based Advanced User Interface
Using Wi-Fi Protected Setup
WPS uses WPA2 (described below) for encryption. It does not
provide additional security, but rather, standardizes the method for
securing your wireless network. You may use either the Push Button
Configuration (PBC) method or PIN method to allow a device access to
your wireless network. Conceptually, the two methods work as follows:
PBC: Push the “Menu” button on the front of your N1 Vision and
select “Wireless Security” from the options. Next select “Push
Button Security”, then initiate the WPS process by selecting “New
Connection”. To complete the WPS procedure, the client device
will need to connect within two minutes. Refer to your client’s
documentation on this procedure. Pushing the PBC button will
automatically enable WPS. The client has now been securely added to
your wireless network.
(1)
(2)
(3)
(4)
(5)
53
10
section
PIN: The client device has a PIN number (either four or eight
digits) that is associated with WPS. Enable WPS through the
screen illustrated below. Enter the client’s PIN into the N1 Vision’s
internal registrar (accessed through this screen). The client will be
automatically enrolled into your wireless network within two minutes.
Using the Web-Based Advanced User Interface
1.
Wi-Fi Protected Setup (WPS): Enabled or Disabled.
2.
Personal Identification Number (PIN) Method: In this method,
a wireless client wishing to access your network must supply
a 4- or 8-digit PIN to the N1 Vision. After clicking “Enroll”, you
must start the WPS handshaking procedure from the client within
two minutes.
3.
Router PIN: If an external registrar is available, you may enter in
the N1 Vision’s PIN to the registrar. Click “Generate New PIN”
to change the PIN from the default value. Click “Restore Default
PIN” to reset the PIN value.
4.
Push Button Configuration (PBC) Method: PBC is an
alternate method to connect to a WPS network. Push the
“Start PBC” button and then initiate the PBC on the client
device. Alternatively, push the “Start PBC” soft button to
start this process.
5.
Manual Configuration Method: This section lists the default
security settings if not using WPS.
The N1 Vision features WPA2, which is the second generation of the
WPA ™ based 802.11i standard. It offers a higher level of wireless
security by combining advanced network authentication and stronger
Advanced Encryption Standard (AES) encryption methods.
54
Using the Web-Based Advanced User Interface
WPA2 Requirements
IMPORTANT: In order to use WPA2 security, all your computers and
wireless client adapters must be upgraded with patches, driver, and
client utility software that supported WPA2. At the time of this User
Manual’s publication, a couple security patches are available, for
free download, from Microsoft ®. These patches work only with the
Windows XP operating system. Other operating systems are not
supported at this time.
For Windows XP with Service Pack 2, Microsoft has released
a free download to update the wireless client components to
support WPA2 (KB893357). The update is available from:
http://support.microsoft.com/?kbid=893357
IMPORTANT: You also need to ensure that all your wireless client
cards/adapters support WPA2, and that you have downloaded and
installed the latest driver. Most of the Belkin wireless cards have
driver updates available for download from the Belkin support site:
www.belkin.com/networking.
55
10
section
For Windows XP computers that do not have Service Pack 2
(SP2), a file from Microsoft called “Windows XP Support Patch
for Wireless Protected Access (KB 826942)” is available for free
download at http://support.microsoft.com/?kbid=826942
Using the Web-Based Advanced User Interface
Setting WPA/WPA2-Personal (PSK)
Like WPA security, WPA2 is available in WPA2-Personal (PSK) mode.
Typically, WPA2-Personal (PSK) is the mode that will be used in a
home environment. This guide will focus on WPA2-Personal (PSK)
usage. Please refer to the User Manual for more information about
wireless security and different types of wireless security.
1.
After you’ve set up your N1 Vision, go to the “Security” page
under “Wireless” and select “WPA/WPA2-Personal (PSK)” from the
“Security Mode” drop-down menu.
2.
For “Authentication”, select “WPA-PSK”, “WPA2-PSK”, or
“WPA-PSK + WPA2-PSK”. This setting will have to be identical
on the wireless clients that you set up. “WPA-PSK + WPA2-PSK”
mode will allow the N1 Vision to support clients running either
WPA or WPA2 security.
4.
Enter your pre-shared key (PSK). This can be from eight to 63
characters and can be letters, numbers, or symbols. This same
key must be used on all of the wireless clients that you set up.
For example, your PSK might be something like: “Smith family
network key”. Click “Apply Changes” to finish. You must now set
all wireless clients to match these settings.
56
Using the Web-Based Advanced User Interface
IMPORTANT: Make sure your wireless computers are updated to work
with WPA2 and have the correct settings to get proper connection to
the N1 Vision.
Setting WPA Security
Note: To use WPA security, your wireless network cards must be
equipped with software that supports WPA. At the time this User Manual
was published, a security patch from Microsoft is available for free
download. This patch works only with Windows XP.
Your N1 Vision supports WPA-PSK (no server). WPA-PSK uses what
is known as a pre-shared key as the security key. A pre-shared key is
basically a password that is between eight and 39 characters long. It
can be a combination of letters, numbers, or characters. Each client
uses the same key to access the network. Typically this is the mode
that will be used in a home environment.
57
10
section
Using the Web-Based Advanced User Interface
Setting Guest Access
Within the WPA security page, the Guest-Access feature is available.
Select this option to create a separate network that allows guests to
connect to the Internet while keeping them away from accessing your
network, computers, and private files.
1.
Select “Enable” from the drop-down box.
2.
Create a guest network name or leave default as “guest”. The
name can be 3 to 15 letters or numbers in length.
3.
Create a guest password or push the “Generate” button to
automatically create this. The password can only be eight letters
or numbers in length.
58
Using the Web-Based Advanced User Interface
Setting WEP Encryption
Note to Mac users: The “Passphrase” option will not operate with
Apple ® AirPort®. To configure encryption for your Mac computer, set the
encryption using the manual method described in the next section.
Select “128-bit WEP” or “64-bit WEP” from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
WEP key manually by typing in the hex values in the space
provided, or you can type a passphrase in the “PassPhrase” field
and click “Generate” to create a WEP key from the passphrase.
Click “Apply Changes” to finish. You must now set all of your
clients to match these settings.
10
3.
Encryption in the N1 Vision is now set. Each of your computers
on your wireless network will now need to be configured with the
same passphrase. Refer to the documentation of your wireless
network adapter for information on making this change.
59
section
1.
Using the Web-Based Advanced User Interface
Using a Hexadecimal Key
A hexadecimal key is a mixture of numbers and letters from A–F
and 0–9. 64-bit keys are 10 digits long and can be divided into five
two-digit numbers. 128-bit keys are 26 digits long and can be divided
into 13 two-digit numbers.
For instance:
AF 0F 4B C3 D4 = 64-bit key
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key
In the boxes below, make up your key by writing in two characters
between A–F and 0–9. You will use this key to program the encryption
settings on your N1 Vision and your wireless computers.
Note to Mac users: Original Apple AirPort products support 64-bit
encryption only. Apple AirPort 2 products can support 64-bit or 128-bit
encryption. Please check your product to see which version you are
using. If you cannot configure your network with 128-bit encryption,
try 64-bit encryption.
Using Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) is the industry standard method to
simplify the security setup and management of Wi-Fi ® networks.
60
Using the Web-Based Advanced User Interface
Using the Access Point Mode
Note: This advanced feature should be employed by advanced users
only. The N1 Vision can be configured to work as a wireless network
access point. Using this mode will defeat the NAT IP sharing feature
and DHCP server. In Access Point (AP) mode, the N1 Vision will need
to be configured with an IP address that is in the same subnet as
the rest of the network that you will bridge to. The default IP address
is 192.168.2.254 and subnet mask is 255.255.255.0. These can be
customized for your need.
Enable the AP mode my selecting “Enable” (1) in the “Use as
Access Point only” page. When you select this option, you will be
able to change the IP settings.
2.
Set your IP settings to match your network. Click
“Apply Changes” (2).
3.
Connect a cable from the “Modem” port on the N1 Vision to your
existing network.
The N1 Vision is now acting as an access point. To access the N1
Vision’s Web-Based Advanced User Interface again, type the IP
address you specified into your browser’s navigation bar. You can set
the encryption settings, MAC address filtering, SSID, and
channel normally.
(1)
(2)
61
10
section
1.
Using the Web-Based Advanced User Interface
Setting MAC Address Control
The MAC address filter is a powerful security feature that allows you
to specify which computers are allowed on the wireless network.
Note: This list applies only to wireless computers. This list can be
configured so any computer attempting to access the wireless network
that is not specified in the filter list will be denied access. When you
enable this feature, you must enter the MAC address of each client
(computer) to which you want to allow network access. The “Block”
feature lets you turn on and off access to the network easily for any
computer without having to add and remove the computer’s MAC
address from the list.
62
Using the Web-Based Advanced User Interface
Setting up an Allow Access List
1. Select the “Allow” radio button (1) to begin setting up a list of
computers allowed to connect to the wireless network.
2.
Next, in the “MAC Address” field that is blank (3), type in the
MAC address of the wireless computer to which you want to give
access to the wireless network.
3.
Continue to do this until all of the computers you want to add
have been entered.
4.
Click “Apply Changes” (4) to finish.
The “Deny Access” list lets you specify computers that you DO NOT
want to access the network. Any computer in the list will not be
allowed access to the wireless network. All others will.
1.
Select the “Deny” radio button (2) to begin setting up a list of
computers to be denied access to the wireless network.
2.
Next, in the “MAC Address” field that is blank (3), type in the
MAC address of the wireless computer to which you want to deny
access to the wireless network.
3.
Continue to do this until all of the computers you want to deny
access to have been entered.
4.
Click “Apply Changes” (4) to finish.
(1)
(2)
(3)
(4)
63
10
section
Setting up a Deny Access List
Using the Web-Based Advanced User Interface
Configuring the Firewall
Your N1 Vision is equipped with a firewall that will protect your
network from a wide array of common hacker attacks including:
•
IP Spoofing
•
Land Attack Ping of Death (PoD)
•
Denial of Service (DoS)
•
IP with zero length
•
Smurf Attack
•
TCP Null Scan
•
SYN flood
•
UDP flooding
•
Tear Drop Attack
•
ICMP defect
•
RIP defect
•
Fragment flooding
The firewall also masks common ports that are frequently used to
attack networks. These ports appear to be “stealth” meaning that
for all intents and purposes, they do not exist to a would-be hacker.
Disabling the firewall protection will not leave your network completely
vulnerable to hacker attacks, but it is recommended that you leave the
firewall enabled.
64
Using the Web-Based Advanced User Interface
Configuring Internal Forwarding Settings
The Virtual Servers function will allow you to route external (Internet) calls
for services such as a web server (port 80), FTP server (Port 21), or other
applications through your N1 Vision to your internal network. Since your
internal computers are protected by a firewall, computers outside your
network (over the Internet) cannot get to them because they cannot be
“seen”. A list of common applications has been provided in case you need
to configure the Virtual Server function for a specific application. If your
application is not listed, you will need to contact the application vendor to
find out which port settings you need.
10
Choosing an Application
Select your application from the drop-down list. Click “Add”. The
settings will be transferred to the next available space in the screen.
Enter an IP address of the computer on which the application will be
running. Click “Apply Changes” to save the setting for that application.
To remove an application, select the number of the row that you want
to remove then click “Clear”.
Manually Entering Settings into the Virtual Server
To manually enter settings, enter the IP address in the space provided
for the internal (server) machine, the port(s) required to pass (for
multiple ports, each single port or port range may need to be on
separate rows), select the port type (TCP, UDP, or BOTH), and click
“Apply Changes”. You can only pass one port per internal IP address.
Opening ports in your firewall can pose a security risk. You can enable
and disable settings very quickly. It is recommended that you disable
the settings when you are not using a specific application.
65
section
Using the Web-Based Advanced User Interface
Setting Client IP Filters
The N1 Vision can be configured to restrict access to the Internet,
e-mail, or other network services at specific days and times.
Restriction can be set for a single computer, a range of computers,
or multiple computers.
To restrict Internet access to a single computer for example, enter
the IP address of the computer you wish to restrict access to in the
IP fields (1). Next, enter “80” in both the port fields (2). Select “Both”
(3). Select “Block” (4). You can also select “Always” to block access
all of the time. Select the day to start on top (5), the time to start on
top (6), the day to end on the bottom (7), and the time to stop (8) on
the bottom. Select “Enable” (9). Click “Apply Changes”. The computer
at the IP address you specified will now be blocked from Internet
access at the times you specified. Note: Be sure you have selected the
correct time zone under “Utilities> System Settings> Time Zone”.
(1)
(2)
(3)
(4)
66
(5)
(6)
(7)
(8)
(9)
Using the Web-Based Advanced User Interface
Enabling the Demilitarized Zone (DMZ)
The DMZ feature allows you to specify one computer on your network
to be placed outside of the firewall. This may be necessary if the
firewall is causing problems with an application such as a game or
video conferencing application. Use this feature on a temporary basis.
The computer in the DMZ is NOT protected from hacker attacks.
To put a computer in the DMZ, enter the last digits of its IP address in
the IP field and select “Enable”. Click “Apply Changes” for the change
to take effect. If you are using multiple static WAN IP addresses, it
is possible to select which WAN IP address the DMZ host will be
directed to. Type in the WAN IP address you wish the DMZ host to
direct to, enter the last two digits of the IP address of the DMZ host
computer, select “Enable” and click “Apply Changes”.
67
10
section
Using the Web-Based Advanced User Interface
Using Dynamic DNS
The Dynamic DNS service allows you to alias a dynamic IP address
to a static host name in any of the many domains DynDNS.org offers,
allowing your network computers to be more easily accessed from
various locations on the Internet. DynDNS.org provides this service, for
up to five host names, free to the Internet community.
The Dynamic DNS SM service is ideal for a home website, file server, or
to make it easy to access your home PC and stored files while you’re at
work. Using the service can ensure that your host name always points
to your IP address, no matter how often your ISP changes it. When your
IP address changes, your friends and associates can always locate you
by visiting yourname.dyndns.org instead!
To register free for your Dynamic DNS host name, please visit
http://www.dyndns.org.
Setting up the N1 Vision’s Dynamic DNS Update Client
You must register with DynDNS.org’s free update service before using
this feature. Once you have your registration, follow the directions below.
1. Enter your DynDNS.org user name in the “User Name” field (1).
2. Enter your DynDNS.org password in the “Password” field (2).
3. Enter the DynDNS.org domain name you set up with DynDNS.org
in the “Domain Name” field (3).
4. Click “Update DDNS/Apply” to update your IP address.
Whenever your IP address assigned by your ISP changes, the N1 Vision will
automatically update DynDNS.org’s servers with your new IP address. You
can also do this manually by clicking the “Update DDNS/Apply” button (4).
(1)
(2)
(3)
68
(4)
Using the Web-Based Advanced User Interface
Blocking an ICMP Ping
Computer hackers use what is known as “pinging” to find
potential victims on the Internet. By pinging a specific IP address
and receiving a response from the IP address, a hacker can
determine that something of interest might be there. The N1 Vision
can be set up so it will not respond to an ICMP ping from the
outside. This heightens your N1 Vision’s security level.
To turn off the ping response, select “Block ICMP Ping” (1) and click
“Apply Changes”. The N1 Vision will not respond to an ICMP ping.
Utilities
The “Utilities” screen lets you manage different parameters of the
N1 Vision and perform certain administrative functions.
69
10
section
(1)
Using the Web-Based Advanced User Interface
Restarting the N1 Vision
Sometimes it may be necessary to restart or reboot the N1 Vision if it
begins working improperly. Restarting or rebooting the N1 Vision will
NOT delete any of your configuration settings.
Restarting the N1 Vision to Restore Normal Operation
1.
Click the “Restart
Router” button.
2.
The following message
will appear. Click “OK”.
3.
The following message
will appear. Restarting
the N1 Vision can take
up to 80 seconds. It is
important not to turn
off the power to the N1
Vision during the restart.
4.
An 80-second countdown will appear on the screen. When the
countdown reaches zero, the N1 Vision will be restarted. The N1
Vision’s home page should appear automatically. If not, type in
the N1 Vision’s address (default = 192.168.2.1) into the navigation
bar of your browser.
70
Using the Web-Based Advanced User Interface
Restoring Factory Default Settings
Using this option will restore all of the settings in the N1 Vision to the
factory (default) settings. It is recommended that you back up your
settings before you restore all of the defaults.
1.
Click the “Restore
Defaults” button.
The following message
will appear. Click “OK”.
3.
4.
The following message
will appear. Restoring
the defaults includes
restarting the N1 Vision.
It can take up to 80
seconds. It is important
not to turn the power to
the N1 Vision off during
the restart.
10
An 80-second countdown will appear on the screen. When the
countdown reaches zero, the N1 Vision’s defaults will be restored.
The N1 Vision’s home page should appear automatically. If it
does not, type in the N1 Vision’s address (default = 192.168.2.1)
into the navigation bar of your browser.
71
section
2.
Using the Web-Based Advanced User Interface
Saving a Current Configuration
You can save your current configuration by using this feature. Saving
your configuration will allow you to restore it later if your settings are
lost or changed. It is recommended that you back up your current
configuration before performing a firmware update.
1.
Click “Save”. A window
called “File Download”
will open. Click “Save”.
2.
A window will open that
allows you to select
the location where
you want to save the
configuration file. Select
a location. You can
name the file anything
you want, or use the
default name “Config”.
Be sure to name the
file so you can locate
it yourself later. When
you have selected the
location and name of
the file, click “Save”.
72
Using the Web-Based Advanced User Interface
3.
When the save is
complete, you will
see this window.
Click “Close”.
The configuration is
now saved.
This option will allow you to restore a previously saved configuration.
1.
Click “Browse”.
A window will open that
allows you to select
the location of the
configuration file. All
configuration files end
with a “.bin”. Locate
the configuration file
you want to restore and
double-click on it.
10
73
section
Restoring a Previous Configuration
Using the Web-Based Advanced User Interface
2.
You will be asked if you
want to continue.
Click “OK”.
3.
A reminder window
will appear. It will take
up to 60 seconds
for the configuration
restoration to complete.
Click “OK”.
4.
A 60-second countdown will appear on the screen. When
the countdown reaches zero, the N1 Vision’s configuration
will be restored. The N1 Vision’s home page should appear
automatically. If not, type in the N1 Vision address (default =
192.168.2.1) into the navigation bar of your browser.
74
Using the Web-Based Advanced User Interface
Updating the Firmware
From time to time, Belkin may release new versions of the N1 Vision’s
firmware. Firmware updates contain feature improvements and fixes to
problems that may have existed. When Belkin releases new firmware,
you can download the firmware from the Belkin update website and
update your N1 Vision’s firmware to the latest version.
(1)
Checking for a New Version of Firmware
The “Check Firmware” (1) button allows you to instantly check for a
new version of firmware. When you click the button, a new browser
window will appear informing you that either no new firmware is
available or that there is a new version available. If a new version is
available, you will have the option to download it.
75
10
section
Using the Web-Based Advanced User Interface
Downloading a New Version of Firmware
If you click the “Check Firmware” button and a new version of
firmware is available, you will see a screen similar to the one below:
1.
To download the new version of firmware, click “Download”.
2.
A window will open that allows you to select the location where
you want to save the firmware file. Select a location. You can
name the file anything you want, or use the default name. Be sure
to locate the file in a place where you can locate it yourself later.
When you have selected the location, click “Save”.
76
Using the Web-Based Advanced User Interface
3. When the save is
complete, you will see
the following window.
Click “Close”.
The download of the
firmware is complete.
To update the firmware,
follow the next steps
in “Updating the N1
Vision’s Firmware”.
1.
2.
In the “Firmware
Update” page, click
“Browse”. A window will
open that allows you to
select the location of
the firmware update file.
10
Browse to the firmware
file you downloaded.
Select the file by
double-clicking on the
file name.
77
section
Updating the N1 Vision’s Firmware
Using the Web-Based Advanced User Interface
3.
The “Update Firmware”
box will now display the
location and name of
the firmware file
you just selected.
Click “Update”.
4.
You will be asked if you
are sure you want to
continue. Click “OK”.
5.
You will see one more message. This message tells you that
the N1 Vision may not respond for as long as one minute as
the firmware is loaded into the N1 Vision and the N1 Vision is
rebooted. Click “OK”.
6.
A 180-second countdown will appear on the screen. When
the countdown reaches zero, the N1 Vision’s firmware update
will be complete. The N1 Vision’s home page should appear
automatically. If not, type in the N1 Vision’s address (default =
192.168.2.1) into the navigation bar of your browser.
78
Using the Web-Based Advanced User Interface
Changing System Settings
The “System Settings” page is where you can enter a new administrator
password, set the time zone, and enable remote management.
Setting or Changing the Administrator Password
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the N1 Vision’s advanced setup interface. The timer
starts when there has been no activity. For example, imagine you have
made some changes in the advanced setup interface, then left your
computer alone without clicking “Logout”. Assuming the time-out is
set to 10 minutes, 10 minutes after you leave, the login session will
expire. You will have to log into the N1 Vision again to make any more
changes. The login time-out option is for security purposes and the
default is set to 10 minutes.
Note: Only one computer can be logged into the N1 Vision’s advanced
setup interface at one time.
79
10
section
The N1 Vision ships with NO password entered. If you wish to add
a password for greater security, you can set a password here.
Write down your password and keep it in a safe place, as you will
need it if you need to log into the N1 Vision in the future. It is also
recommended that you set a password if you plan to use the remote
management feature of your N1 Vision.
Using the Web-Based Advanced User Interface
Setting the Time and Time Zone
The N1 Vision keeps time by c onnecting to a Simple Network Time
Protocol (SNTP) server. This allows the N1 Vision to synchronize the
system clock to the global Internet. The synchronized clock in the N1
Vision is used to record the security log and control client filtering.
Select the time zone that you reside in. You have the option to select
a primary and a backup NTP server to keep your N1 Vision’s clock
synchronized. Select your desired NPT server from the drop-down
box, or simply keep it as is.
If you reside in an area that observes daylight saving, then place a
check mark in the box next to “Enable Daylight Saving”. The system
clock may not update immediately. Allow at least 15 minutes for
the N1 Vision to contact the time servers on the Internet and get a
response. You cannot set the clock yourself.
Enabling Remote Management
Before you enable this advanced feature of your Belkin N1 Vision,
MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD.
Remote management allows you to make changes to your N1 Vision’s
settings from anywhere on the Internet. There are two methods of
remotely managing the N1 Vision. The first is to allow access to the
N1 Vision from anywhere on the Internet by selecting “Any IP address
can remotely manage the router”. By typing in your WAN IP address
from any computer on the Internet, you will be presented with a login
screen where you need to type in the password of your N1 Vision.
The second method is to allow a specific IP address only to remotely
manage the N1 Vision. This is more secure, but less convenient. To
use this method, enter the IP address you know you will be accessing
the N1 Vision from in the space provided and select “Only this IP
address can remotely manage the N1 Vision”. Before you enable
this function, it is STRONGLY RECOMMENDED that you set your
administrator password. Leaving the password empty will potentially
open your N1 Vision to intrusion.
80
Using the Web-Based Advanced User Interface
Advanced Feature: The “Remote Access Port” option allows you to
configure the desired “Remote Access Port for Remote Management”
feature. The default access port is set to port 80.
UPnP (Universal Plug-and-Play) is yet another advanced feature
offered by your Belkin N1 Vision. It is a technology that offers
seamless operation of voice messaging, video messaging, games, and
other applications that are UPnP-compliant. Some applications require
the N1 Vision’s firewall to be configured in a specific way to operate
properly. This usually requires opening TCP and UDP ports, and in
some instances, setting trigger ports. An application that is UPnPcompliant has the ability to communicate with the N1 Vision, basically
“telling” the N1 Vision which way it needs the firewall configured. The
N1 Vision ships with the UPnP feature disabled. If you are using any
applications that are UPnP-compliant, and wish to take advantage of
the UPnP features, you can enable the UPnP feature. Simply select
“Enable” in the “UPnP Enabling” section of the “Utilities” page. Click
“Apply Changes” to save the change.
81
10
section
Enabling/Disabling UPnP
Using the Web-Based Advanced User Interface
Enabling/Disabling Auto Firmware Update
This innovation provides the N1 Vision with the built-in capability
to automatically check for a new version of firmware and alert you
that the new firmware is available. When you log into the N1 Vision’s
advanced interface, the N1 Vision will perform a check to see if new
firmware is available. If so, you will be notified. You can choose to
download the new version or ignore it.
82
Manually Configuring Network Settings
Set up the computer that is connected to the cable or DSL modem
FIRST using these steps. You can also use these steps to add
computers to your N1 Vision after the N1 Vision has been set up to
connect to the Internet.
Manually Configuring Network Settings in Mac OS up to 9.x
1.
Pull down the Apple menu. Select “Control Panels” and
select “TCP/IP”.
2.
You will see the TCP/IP control panel. Select “Ethernet Built-In”
or “Ethernet” in the “Connect via:” drop-down menu (1).
3.
Next to “Configure”
(2), if “Manually” is
selected, your N1
Vision will need to be
set up for a static IP
connection type. Write
the address information
in the table below.
You will need to enter
this information into
the N1 Vision.
(1)
10
4.
If not already set, at “Configure:”, choose “Using DHCP Server”.
This will tell the computer to obtain an IP address from the
N1 Vision.
5.
Close the window.
If you made any changes, the following window will appear.
Click “Save”.
Restart the computer. When the computer restarts, your network
settings are now configured for use with the N1 Vision.
83
section
(2)
Manually Configuring Network Settings
Manually Configuring Network Settings in Mac OS X
1. Click on the “System Preferences” icon.
2.
Select “Network” (1) from the “System Preferences” menu.
3.
Select “Built-in Ethernet” (2) next to “Show” in the
Network menu.
(1)
(5)
(2)
(3)
(4)
84
Manually Configuring Network Settings
4.
5.
Select the “TCP/IP” tab (3). Next to “Configure” (4), you should
see “Manually” or “Using DHCP”. If you do not, check the
PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT
selected. If it is, you will need to configure your N1 Vision for a
PPPoE connection type using your user name and password.
If “Manually” is selected, your N1 Vision will need to be set up
for a static IP connection type. Write the address information
in the table below. You will need to enter this information into
the N1 Vision.
6.
If not already selected, select “Using DHCP” next to “Configure”
(4), then click “Apply Now”.
Your network settings are now configured for use with the
N1 Vision.
85
10
section
Manually Configuring Network Settings
Manually Configuring Network Settings in Windows 2000, NT®, or XP
1.
Click “Start”, “Settings”, then “Control Panel”.
2.
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP).
3.
Right-click on the “Local Area Connection” associated with
your network adapter and select “Properties” from the
drop-down menu.
4.
In the “Local Area Connection Properties” window, click “Internet
Protocol (TCP/IP)” and click the “Properties” button. The
following screen will appear:
(1)
(2)
(3)
5.
If “Use the following IP address” (2) is selected, your N1 Vision
will need to be set up for a static IP connection type. Write the
address information the table below. You will need to enter this
information into the N1 Vision.
6.
If not already selected, select “Obtain an IP address
automatically” (1) and “Obtain DNS server address automatically”
(3). Click “OK”.
Your network settings are now configured for use with the
N1 Vision.
86
Manually Configuring Network Settings
Manually Configuring Network Adapters in Windows 98SE or Me
1.
Right-click on “My Network Neighborhood” and select
“Properties” from the drop-down menu.
2.
Select “TCP/IP Settings” for your installed network adapter. You
will see the following window.
(3)
(1)
(2)
3.
If “Specify an IP address” is selected, your N1 Vision will need to
be set up for a static IP connection type. Write the address
information in the table below. You will need to enter this
information into the N1 Vision.
4.
Write the IP address and subnet mask from the “IP Address”
tab (3).
5.
Click the “Gateway” tab (2). Write the gateway address down in
the chart.
6.
Click the “DNS Configuration” tab (1). Write the DNS address(es)
in the chart.
7.
If not already selected,
select “Obtain IP
address automatically”
on the IP address tab.
Click “OK”.
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the N1 Vision.
87
10
section
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web
browser’s settings. If you are having trouble accessing the Internet or
the advanced web-based user interface, then change your browser’s
settings to the recommended settings in this section.
Microsoft® Internet Explorer 4.0 or Higher
1.
Start your web browser. Select “Tools” then “Internet Options”.
2.
In the “Internet Options” screen, there are three selections:
“Never dial a connection”, “Dial whenever a network connection
is not present”, and “Always dial my default connection”. If you
can make a selection, select “Never dial a connection”. If you
cannot make a selection, go to the next step.
3.
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings…”.
88
Recommended Web Browser Settings
4.
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic
configuration script”, and “Use a proxy server”. Click “OK”. Then
click “OK” again in the “Internet Options” page.
Netscape® Navigator® 4.0 or Higher
1. Start Netscape. Click on “Edit” then “Preferences”.
2.
In the “Preferences” window, click on “Advanced” then select
“Proxies”. In the “Proxies” window, select “Direct connection
to the Internet”.
89
10
section
Troubleshooting
Assistant CD does not automatically start.
If the CD-ROM does not start the Assistant software automatically,
it could be that the computer is running other applications that are
interfering with the CD drive.
1.
If the Assistant software’s Welcome screen does not appear
within 15-20 seconds, open up your CD-ROM drive by
double-clicking on the “My Computer” icon that is located on
your desktop.
2.
Next, double-click on the CD-ROM drive that the Assistant
software CD has been placed in to start the installation.
3.
The Assistant software should start within a few seconds. If,
instead, a window appears showing the files on the CD,
double-click on the icon labeled “setup.exe”.
4.
If the Assistant software still does not start, reference the section
titled “Manually Configuring Network Settings” (page 83) in this
User Manual for an alternative setup method).
Assistant software cannot find my N1 Vision.
If the Assistant software is not able to find the N1 Vision during the
installation process, please check the following items:
1.
If the Assistant software is not able to find the N1 Vision during
the installation process, there may be third-party firewall
software installed on the computer attempting to access the
Internet. Examples of third-party firewall software are ZoneAlarm,
BlackICE PC Protection, McAfee Personal Firewall, and Norton
Personal Firewall. If you do have firewall software installed on
your computer, please make sure that you properly configure it.
You can determine if the firewall software is preventing Internet
access by temporarily turning it off. If, while the firewall is
disabled, Internet access works properly, you will need to change
the firewall settings to function properly when it is turned on.
Please refer to the instructions provided by the publisher of your
firewall software for instructions on configuring the firewall to
allow Internet access.
90
Troubleshooting
2.
3.
Unplug power to the N1 Vision for 10 seconds, and then plug the
power back into the N1 Vision. Ensure that the N1 Vision’s “router”
icon is on. If not, check to make sure that the AC adapter is
connected to the N1 Vision and plugged into a wall outlet.
Ensure that you have a cable connected between (1) the network
(Ethernet) port on the back of the computer and (2) one of the “to
Wired Computers” ports on the back of the N1 Vision.
Note: The computer should NOT be connected to the port labeled
“to Modem” on the back of the N1 Vision.
4.
Try shutting down and restarting your computer, then rerunning
the Assistant software.
If the Assistant software is still unable to find the N1 Vision, reference
the section titled “Manually Configuring Network Settings” for
installation steps.
Assistant software cannot connect my N1 Vision to the Internet
1.
Use the troubleshooting suggestions within the Assistant
software.
2.
If your ISP requires a user name and password, make sure
that you have typed in your user name and password correctly.
Some user names require that the ISP’s domain may be at the
end of the name. Example: “myname@myisp.com”. The “@myisp.
com” part of the user name may need to be typed as well as your
user name.
If you continue to have no Internet connection, reference the section
titled “Manually Configuring Network Settings” (page 83 of this User
Manual for an alternative setup method).
91
10
section
If the Assistant software is not able to connect the N1 Vision to the
Internet, please check the following items:
Troubleshooting
•
The Assistant software completed installation, but my web
browser doesn’t work.
•
I am unable to connect to the Internet. The “modem” icon on
my N1 Vision is blinking, and the “internet” icon is blinking.
If you cannot connect to the Internet, and the “modem” icon is
blinking, and the “internet” icon is blinking, the problem may be that
your modem and N1 Vision are not connected properly.
1.
Make sure the network cable between the modem and the N1
Vision is connected. The cable should be connected at one end
to the N1 Vision’s “to Modem” port, and at the other end to the
network port on your modem.
2.
Unplug the cable or DSL modem from its power source for
three minutes. After three minutes, plug the modem back into its
power source. This may force the modem to properly recognize
the N1 Vision.
3.
Unplug the power to your N1 Vision, wait 10 seconds, and then
reconnect the power. This will cause the N1 Vision to reattempt
communication with the modem. If the “modem” icon on the
N1 Vision is not lit after completing these steps, please contact
Belkin Technical Support.
4.
Try shutting down and restarting your computer.
92
Troubleshooting
•
The Assistant software completed installation, but my web
browser doesn’t work.
•
I am unable to connect to the Internet. The “modem” icon on
my N1 Vision is on, and the “internet” icon is blinking.
1.
If you cannot connect to the Internet, the “modem” icon is on,
and the “internet” icon is blinking, the problem may be that your
connection type may not match the ISP’s connection.
2.
If you have a “static IP address” connection, your ISP must
assign you the IP address, subnet mask, and gateway address.
Please refer to the section entitled “Alternate Setup Method” for
details on changing this setting.
3.
4.
If you have a “PPPoE” connection, your ISP will assign you a user
name and password and sometimes a service name. Make sure
the N1 Vision’s connection type is configured to PPPoE and the
settings are entered properly. Please refer to the section entitled
“Alternate Setup Method” for details on changing this setting.
If you are still unable to access the Internet after verifying these
settings, please contact Belkin Technical Support.
93
10
section
You may need to configure your N1 Vision to meet the specific
requirements of your ISP. To search our knowledge base for
ISP-specific issues, go to: http://web.belkin.com/support and
type in “ISP” into the “Product Support Search” text box.
Troubleshooting
•
The Assistant software completed, but my web browser
doesn’t work.
•
I am unable to connect to the Internet. The “modem” icon on
my N1 Vision is blinking, and the “internet” icon is solid.
1.
If the “modem” icon is blinking, and the “internet” icon is
solid, but you are unable to access the Internet, there may be
third-party firewall software installed on the computer attempting
to access the Internet. Examples of third-party firewall software
are ZoneAlarm, BlackICE PC Protection, McAfee Personal
Firewall, and Norton Personal Firewall.
2.
If you do have firewall software installed on your computer,
please make sure that you properly configure it. You can
determine if the firewall software is preventing Internet access by
temporarily turning it off. If, while the firewall is disabled, Internet
access works properly, you will need to change the firewall
settings to function properly when it is turned on.
3.
Please refer to the instructions provided by the publisher of your
firewall software for instructions on configuring the firewall to
allow Internet access.
If you are still unable to access the Internet after disabling any firewall
software, please contact Belkin Technical Support.
94
Troubleshooting
I can’t connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless computer,
please check the following items:
1.
Look at the lights on your N1 Vision. They should be as follows:
• The “router” icon should be on.
• The “radio wave” icon above the “router” icon should be on.
• The “modem” light should be on, and not blinking.
• The “internet” icon should be on, and not blinking.
• The “Wireless” light should be on, not blinking.
2.
Open your wireless utility software by clicking on the icon in the
system tray at the bottom, right-hand corner of the screen.
3.
The exact window that opens will vary depending on the model of
wireless card you have; however, any of the utilities should have
a list of “Available Networks”—those wireless networks it can
connect to.
Does the name of your wireless network appear in the results?
No, my network name is not listed—go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, and my network name
is not listed”.
95
10
section
Yes, my network name is listed—go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, but my network name
is listed”.
Troubleshooting
I can’t connect to the Internet wirelessly, but my network name
is listed.
If the name of your network is listed in the “Available Networks” list,
please follow the steps below to connect wirelessly:
1.
Click on the correct network name in the “Available
Networks” list.
2.
If the network has security (encryption) enabled, you will
need to enter the network key. For more information regarding
security, see the section entitled “Changing the Wireless
Security Settings”.
3.
Within a few seconds, the tray icon in the lower, left-hand corner
of your screen should turn green, indication of a successful
connection to the network.
I can’t connect to the Internet wirelessly, and my network name
is not listed.
If the correct network name is not listed under “Available Networks” in
the wireless utility, please attempt the following troubleshooting steps:
1.
Temporarily move computer, if possible, five to 10 feet from the
N1 Vision. Close the wireless utility, and reopen it. If the correct
network name now appears under “Available Networks”, you may
have a range or interference problem. Please see the suggestions
discussed in the section titled “Placement of your N1 Vision” in
this User Manual.
2.
Using a computer that is connected to the N1 Vision via a
network cable (as opposed to wirelessly), ensure that “Broadcast
SSID” is enabled. This setting is found on the N1 Vision’s wireless
“Channel and SSID” configuration page.
If you are still unable to access the Internet after completing these
steps, please contact Belkin Technical Support.
96
Troubleshooting
•
My wireless network performance is inconsistent.
•
Data transfer is sometimes slow.
•
Signal strength is poor.
•
Difficulty establishing and/or maintaining a Virtual Private
Network (VPN) connection.
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors that
will cause signal degradation (metal is generally the worst culprit)
are obstructions such as walls and metal appliances. Note also
that connection speed may decrease as you move farther away from
the N1 Vision.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer, if possible, five to 10 feet
from the N1 Vision.
Limiting the wireless transmit rate—Limiting the wireless transmit
rate can help improve the maximum wireless range and connection
stability. Most wireless cards have the ability to limit the transmission
rate. To change this property, go to the Windows Control Panel, open
“Network Connections” and double-click on your wireless card’s
connection. In the properties dialog, select the “Configure” button on
the “General” tab (Windows 98 users will have to select the wireless
card in the list box and then click “Properties”), then choose the
“Advanced” tab and select the rate property.
Wireless client cards are usually set to automatically adjust the
wireless transmit rate for you, but doing so can cause periodic
disconnects when the wireless signal is too weak; as a rule, slower
transmission rates are more stable. Experiment with different
connection rates until you find the best one for your environment.
Note that all available transmission rates should be acceptable for
browsing the Internet. For more assistance, see your wireless card’s
user manual.
97
10
section
Changing the wireless channel—Depending on local wireless traffic
and interference, switching the wireless channel of your network
can improve performance and reliability. The default channel the N1
Vision is shipped with is channel 11; you may choose from several
other channels depending on your region. See the section on page 50
entitled “Changing the Wireless Channel” for instructions on how to
choose other channels.
Troubleshooting
I am having difficulty setting up Wired Equivalent Privacy (WEP)
security on my Belkin N1 Vision.
1.
Log into your N1 Vision.
Open your web browser and type in the IP address of the N1
Vision. (The N1 Vision’s default is 192.168.2.1.) Log into your N1
Vision by clicking on the “Login” button in the top right-hand
corner of the screen. You will be asked to enter your password. If
you never set a password, leave the “Password” field blank and
click “Submit”.
Click the “Wireless” tab on the left of your screen. Select
the “Encryption” or “Security” tab to get to the security
settings page.
2.
Select “128-bit WEP” from the drop-down menu.
3.
After selecting your WEP encryption mode, you can type in
your hex WEP key manually, or you can type in a passphrase
in the “Passphrase” field and click “Generate” to create a WEP
key from the passphrase. Click “Apply Changes” to finish. You
must now set all of your clients to match these settings. A hex
(hexadecimal) key is a mixture of numbers and letters from A-F
and 0-9. For 128-bit WEP, you need to enter 26 hex keys.
For example:
C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key
4.
Click “Apply Changes” to finish. Encryption in the Wireless N1
Vision is now set. Each of your computers on your wireless
network will now need to be configured with the same security
settings.
WARNING: If you are configuring the N1 Vision from a computer with
a wireless client, you will need to ensure that security is turned on
for this wireless client. If this is not done, you will lose your
wireless connection.
Note to Mac users: Original Apple AirPort products support 64-bit
encryption only. Apple AirPort 2 products can support 64-bit or
128-bit encryption. Please check your Apple AirPort product to see
which version you are using. If you cannot configure your network
with 128-bit encryption, try 64-bit encryption.
98
Troubleshooting
I am having difficulty setting up Wired Equivalent Privacy (WEP)
security on a Belkin client card.
The client card must use the same key as the N1 Vision. For instance,
if your N1 Vision uses the key 00112233445566778899AABBCC, then
the client card must be set to the exact same key.
1.
Double-click the Signal Indicator icon to bring up the “Wireless
Network” screen.
2.
The “Advanced” button will allow you to view and configure more
options of the card.
3.
Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card.
Under the “Wireless Network Properties” tab, select a
network name from the “Available Networks” list and click the
“Properties” button.
5.
Under “Data Encryption”, select “WEP”.
6.
Ensure the check box “The key is provided for me automatically”
at the bottom is unchecked. If you are using this computer to
connect to a corporate network, please consult your network
administrator if this box needs to be checked.
7.
Type your WEP key in the “Network key” box.
Important: A WEP key is a mixture of numbers and letters
from A-F and 0-9. For 128-bit WEP, you need to enter 26 keys.
This network key needs to match the key you assign to your
N1 Vision.
For example:
C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key
8.
Click “OK”, and then “Apply” to save the settings.
If you are NOT using a Belkin wireless client card, please consult the
manufacturer’s user manual for that wireless client card.
99
10
section
4.
Troubleshooting
Do Belkin products support WPA?
Note: To use WPA security, all your clients must be upgraded
to drivers and software that support it. At the time of this FAQ
publication, a security patch download is available, for free,
from Microsoft. This patch works only with the Windows XP
operating system.
Download the patch here:
http://www.microsoft.com/downloads/details.
You also need to download the latest driver for your Belkin Wireless
Network Card from the Belkin support site. Other operating systems
are not supported at this time. Microsoft’s patch only supports
devices with WPA-enabled drivers such as Belkin N1 products
Download the latest driver at http://web.belkin.com/support for
the following products:
F5D8001, F5D8011, F5D8051, F5D8071
I am having difficulty setting up Wireless Protected Access (WPA)
security on my Belkin N1 Vision for a home network.
1.
From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)”.
2.
For “Encryption Technique”, select “TKIP”. This setting will have
to be identical on the clients that you set up.
3.
Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, symbols, or spaces.
This same key must be used on all of the clients that you set up.
For example, your PSK might be something like: “Smith family
network key”.
4.
Click “Apply Changes” to finish. You must now set all clients to
match these settings.
100
Troubleshooting
I am having difficulty setting up Wireless Protected Access (WPA)
security on a Belkin wireless client card for a home network.
Clients must use the same key that the N1 Vision uses. For instance,
if the key is “Smith Family Network Key” in the N1 Vision, the clients
must also use that same key.
1.
Double-click the Signal Indicator icon to bring up the “Wireless
Network” screen. The “Advanced” button will allow you to view
and configure more options of your card.
2.
Once the “Advanced” button is clicked, the Belkin Wireless Utility
will appear. This Utility will allow you to manage all the advanced
features of the Belkin Wireless Card.
3.
Under the “Wireless Network Properties” tab, select a
network name from the “Available Networks” list and click the
“Properties” button.
4.
Under “Network Authentication”, select “WPA-PSK (no server).
5.
Type your WPA key in the “Network key” box.
from A-Z and 0-9. For WPA-PSK you can enter eight to 63
characters. This network key needs to match the key you assign
to your N1 Vision.
6.
Click “OK, then “Apply” to save the settings.
101
10
section
Important: WPA-PSK is a mixture of numbers and letters
Troubleshooting
I am NOT using a Belkin client card for a home network and
I am having difficulty setting up Wireless Protected Access
(WPA) security.
If you are not using a Belkin Wireless Desktop or Wireless Notebook
Network Card that is not equipped with WPA-enabled software, a
file from Microsoft called “Windows XP Support Patch for Wireless
Protected Access” is available for free download. Download the
patch from Microsoft by searching the knowledge base for Windows
XP WPA.
Note: The file that Microsoft has made available works only with
Windows XP. Other operating systems are not supported at this
time. You also need to ensure that the wireless card’s manufacturer
supports WPA and that you have downloaded and installed the latest
driver from their support site.
Supported Operating Systems:
• Windows XP Professional
• Windows XP Home Edition
1.
Under Windows XP, click “Start > Control Panel >
Network Connections”.
2.
Right-clicking on the “Wireless Networks” tab will display the
following screen. Ensure the “Use Windows to configure my
wireless network settings” check box is checked.
102
Troubleshooting
3.
Under the “Wireless Networks” tab, click the “Configure” button
and you will see the following screen.
4.
For a home or small business user, select “WPA-PSK” under
“Network Administration”.
Note: Select WPA (with radius server) if you are using this computer to
5.
Select “TKIP” or “AES” under “Date Encryption”. This setting will
have to be identical to the N1 Vision that you set up.
6.
Type in your encryption key in the “Network key” box.
Important: Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
7.
Click “OK” to apply settings.
What’s the difference between 802.11b, 802.11g, 802.11a, and
draft 802.11n?
Currently there are four levels of wireless networking standards,
which transmit data at very different maximum speeds. Each is
based on the designation for certifying network standards. The
most common wireless networking standard, 802.11b, transmits
information at 11Mbps; 802.11a and 802.11g work at 54Mbps; and
draft 802.11n works at 108Mbps. See the chart on the next page for
more detailed information.
103
10
section
connect to a corporate network that supports an authentication server
such as a radius server. Please consult your network administrator for
further information.
Troubleshooting
G Plus
(802.11g with
HSM)
Frequency
Common
household
devices such
as cordless
phones and
microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Common
household
devices such
as cordless
phones and
microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Common
household
devices such
as cordless
phones and
microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Common
household
devices such
as cordless
phones and
microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Common
household
devices such
as cordless
phones and
microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Compatibility
Compatible
with 802.11g
Compatible
with 802.11b/g
Compatible
with 802.11b/g
Compatible
with 802.11b/g
Compatible
with draft
802.11n** and
802.11b/g
Coverage*
Typically
100–200 ft.
indoors
Up to 400 ft.*
Up to 700 ft.*
Up to 1,000 ft.* Up to 1,400 ft.*
Common—
Mature—legacy widespread
use for Internet
technology
sharing
Enhanced
speed and
coverage
Leading
Better coverage
edge—best
and consistent
coverage and
speed at range
throughput
G Plus MIMO
(802.11g with
MIMO MRC)
(802.11g)
10x faster
than 802.11b*
802.11b
5x faster than
802.11b*
Wireless
Technology
Speed*
11Mbps link
rate/baseline
Advantage
N1 MIMO
(draft 802.11n
with MIMO)
Wireless Comparison Chart
10x faster than
802.11b*
Wired speed
over the air*
*Distance and connection speeds will vary depending on your networking environment.
**This N1 Vision is compatible with products based on the same version of the draft
802.11n specifications, and may require a software upgrade for best results.
104
Troubleshooting
Technical Support
You can find technical support information at www.belkin.com/
networking. If you want to contact technical support by phone,
please call:
US:	877-736-5771
800-223-5546 ext. 2263
310-898-1100 ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
10
105
section
Information
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street,
Compton, CA 90220, declare under our sole responsibility
that the product,
F5D8232-4 v2000
to which this declaration relates, complies with Part 15
of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio frequency
exposure limits. Nevertheless, the device shall be used in such a manner that
the potential for human contact during normal operation is minimized.
When connecting an external antenna to the device, the antenna shall be
placed in such a manner to minimize the potential for human contact during
normal operation. In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less
than 20cm (8 inches) during normal operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
106
Information
Modifications
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Belkin International, Inc., may
void the user’s authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry
Canada. This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003
du Canada.
Europe-European Union Notice Radio products with the
CE 0560 or CE alert marking comply with the R&TTE Directive
(1995/5/EC) issued by the Commission of the European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• EN 301 489/ EN 50385
To determine the type of transmitter, check the identification label on your
Belkin product.
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity
• EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with CE 0560 or CE
alert marking and may also carry the CE logo.
低功率電波幅性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使
用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發
現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。
前項合法通信,指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或
工業、科學及醫療用電波輻射性電機設備之干擾。
107
10
section
Products with the CE marking comply with the EMC Directive
(2004/108/EEC) and the Low Voltage Directive (2006/95/EEC) issued
by the Commission of the European Community. Compliance with these
directives implies conformity to the following European
Norms (in brackets are the equivalent international standards).
Information
Belkin International, Inc., Limited Lifetime Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this
Belkin product that the product shall be free of defects in design, assembly,
material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for the lifetime of the product.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge
(except for shipping charges for the product). Belkin reserves the right to
discontinue any of its products without notice, and disclaims any limited
warranty to repair or replace any such discontinued products. In the event
that Belkin is unable to repair or replace the product (for example, because
it has been discontinued), Belkin will offer either a refund or a credit toward
the purchase of another product from Belkin.com in an amount equal to the
purchase price of the product as evidenced on the original purchase receipt
as discounted by its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided
to Belkin for inspection upon Belkin’s request at the sole expense of
the purchaser, or if Belkin determines that the Belkin product has been
improperly installed, altered in any way, or tampered with. The Belkin Product
Warranty does not protect against acts of God such as flood, earthquake,
lightning, war, vandalism, theft, normal-use wear and tear, erosion,
depletion, obsolescence, abuse, damage due to low voltage disturbances
(i.e. brownouts or sags), non-authorized program, or system equipment
modification or alteration.
How to get service.
To get service for your Belkin product you must take the following steps:
1.	Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA
90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of
the Occurrence. Be prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
108
Information
2.	Your Belkin Customer Service Representative will then instruct you on
how to forward your receipt and Belkin product and how to proceed
with your claim.
Belkin reserves the right to review the damaged Belkin product. All costs of
shipping the Belkin product to Belkin for inspection shall be borne solely by
the purchaser. If Belkin determines, in its sole discretion, that it is impractical
to ship the damaged equipment to Belkin, Belkin may designate, in its sole
discretion, an equipment repair facility to inspect and estimate the cost to
repair such equipment. The cost, if any, of shipping the equipment to and
from such repair facility and of such estimate shall be borne solely by the
purchaser. Damaged equipment must remain available for inspection until the
claim is finalized. Whenever claims are settled, Belkin reserves the right to be
subrogated under any existing insurance policies the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED
BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION
OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN
DURATION TO THE TERM OF THIS WARRANTY.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS,
BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF
THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other
rights, which may vary from state to state. Some states do not allow the
exclusion or limitation of incidental, consequential, or other damages, so the
above limitations may not apply to you
109
10
section
Some states do not allow limitations on how long an implied warranty lasts,
so the above limitations may not apply to you.
Belkin Tech Support
US:	877-736-5771
800-233-5546 ext. 2263
310-898-1100 ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
P75490-A • F5D8232-4  
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. Mac, Mac OS, Apple, and AirPort are trademarks of Apple Inc.,
registered in the U.S. and other countries. Windows, NT, Microsoft, and Windows Vista are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2008:06:12 09:40:44+08:00
Create Date                     : 2008:06:04 15:26:32-07:00
Creator                         : Adobe InDesign CS3 (5.0.2)
Page Count                      : 114
Has XFA                         : No
About                           : uuid:af57f07b-2996-44c5-9b70-d69a9dbe02fb
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Creation Date                   : 2008:06:04 15:26:32-07:00
Mod Date                        : 2008:06:12 09:40:44+08:00
Metadata Date                   : 2008:06:12 09:40:44+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0.2)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 5508 bytes, use -b option to extract)
Instance ID                     : uuid:9ca133d2-ddca-964a-b6d2-137d2d1281c7
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:fb6b5f74-1ded-11dd-87b2-f5df89e823e2
Derived From Instance ID        : fb6b5f73-1ded-11dd-87b2-f5df89e823e2
Derived From Document ID        : adobe:docid:indd:d999068c-2680-11dc-b551-cca826f220c5
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 96.00, 96.00, 72.00, 300.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 300.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 300.00, 300.00, 300.00, 96.00, 96.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 96.00, 96.00, 72.00, 300.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 300.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 300.00, 300.00, 300.00, 96.00, 96.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:72D05D1520E911DCB5BE864C99769AB6, uuid:72D05D1520E911DCB5BE864C99769AB6, uuid:f04cab42-24fc-11dc-8f18-000d93b8254a, uuid:29db2f52-e743-11d6-a982-f04d8608c94d, uuid:E5E49487261CDD11903EDF5F3A7658E5, uuid:8ae0b77d-258c-11dc-95e7-fac8a94ceda0, uuid:8d65ae7e-258c-11dc-95e7-fac8a94ceda0, uuid:8bb02e8a-258c-11dc-95e7-fac8a94ceda0, uuid:8ca69189-258c-11dc-95e7-fac8a94ceda0, uuid:8d65ae88-258c-11dc-95e7-fac8a94ceda0, uuid:8ee44556-258c-11dc-95e7-fac8a94ceda0, uuid:8e200417-258c-11dc-95e7-fac8a94ceda0, uuid:d168657f-258c-11dc-95e7-fac8a94ceda0, uuid:f379df3d-258c-11dc-95e7-fac8a94ceda0, uuid:f42283d0-258c-11dc-95e7-fac8a94ceda0, uuid:f42283da-258c-11dc-95e7-fac8a94ceda0, uuid:f57be47c-258c-11dc-95e7-fac8a94ceda0, uuid:f6255d99-258c-11dc-95e7-fac8a94ceda0, uuid:f6ce39a4-258c-11dc-95e7-fac8a94ceda0, uuid:f4cfdd09-258c-11dc-95e7-fac8a94ceda0, uuid:f7ad7e0b-258c-11dc-95e7-fac8a94ceda0, uuid:ee2647f8-258c-11dc-95e7-fac8a94ceda0, uuid:eed63d97-258c-11dc-95e7-fac8a94ceda0, uuid:ef807284-258c-11dc-95e7-fac8a94ceda0, uuid:f05bc0d1-258c-11dc-95e7-fac8a94ceda0, uuid:f05bc0d1-258c-11dc-95e7-fac8a94ceda0, uuid:f1fd30fd-258c-11dc-95e7-fac8a94ceda0, uuid:f2a8bb2a-258c-11dc-95e7-fac8a94ceda0, uuid:b38915ca-e7e3-11da-9683-caaa1f97f51f, uuid:523D9578FE1811DBA353EB09FCD030A9, uuid:4959d6c8-e7e3-11da-9683-caaa1f97f51f, uuid:1698b98a-e7e6-11da-9683-caaa1f97f51f, uuid:6e7b1f0d-e7e6-11da-9683-caaa1f97f51f, uuid:f7bc3ca2-e7e3-11da-9683-caaa1f97f51f, uuid:2f5cb81c-2636-11dc-a5c7-d0ac40e8881c, , uuid:d365ef9a-e7ea-11da-9683-caaa1f97f51f, uuid:3155bafc-2637-11dc-a5c7-d0ac40e8881c, uuid:533a1af4-e7ec-11da-9683-caaa1f97f51f, uuid:0783756a-2638-11dc-a5c7-d0ac40e8881c, uuid:d5693168-e7ee-11da-9683-caaa1f97f51f, uuid:f214ef7a-e7ef-11da-9683-caaa1f97f51f, uuid:3aac7bcb-e7f0-11da-9683-caaa1f97f51f, uuid:c054d82f-258c-11dc-95e7-fac8a94ceda0, uuid:cf93caed-258c-11dc-95e7-fac8a94ceda0, uuid:d068c058-258c-11dc-95e7-fac8a94ceda0, uuid:bd85cb02-258c-11dc-95e7-fac8a94ceda0, uuid:cb97f067-258c-11dc-95e7-fac8a94ceda0, uuid:c46294fd-258c-11dc-95e7-fac8a94ceda0, uuid:7d138f7a-267e-11dc-b5cf-a4f089c3821e, uuid:cc67967c-258c-11dc-95e7-fac8a94ceda0, uuid:bcb1028d-258c-11dc-95e7-fac8a94ceda0, uuid:c31ffdfc-258c-11dc-95e7-fac8a94ceda0, uuid:7849d0fc-e810-11da-ba1f-855b2b373a04, uuid:c131f5b0-258c-11dc-95e7-fac8a94ceda0, uuid:c2449e2f-258c-11dc-95e7-fac8a94ceda0, uuid:bac6a849-258c-11dc-95e7-fac8a94ceda0, uuid:b7859896-258c-11dc-95e7-fac8a94ceda0, uuid:b7859896-258c-11dc-95e7-fac8a94ceda0, uuid:29d23caf-266c-11dc-b5cf-a4f089c3821e, uuid:ca8b260e-258c-11dc-95e7-fac8a94ceda0, uuid:c9b2f073-258c-11dc-95e7-fac8a94ceda0, uuid:c8da3c98-258c-11dc-95e7-fac8a94ceda0, uuid:2ea7e2ae-51b8-11d9-8492-d0921a19fe85, uuid:8fa17c5b-258c-11dc-95e7-fac8a94ceda0, uuid:7c674b7d-e810-11da-ba1f-855b2b373a04, uuid:bd85cb0c-258c-11dc-95e7-fac8a94ceda0, uuid:ce7968a8-258c-11dc-95e7-fac8a94ceda0, uuid:b8950d83-258c-11dc-95e7-fac8a94ceda0, uuid:6e534b28-e810-11da-ba1f-855b2b373a04, uuid:bba24916-258c-11dc-95e7-fac8a94ceda0, uuid:b97ce86e-258c-11dc-95e7-fac8a94ceda0, uuid:d068c062-258c-11dc-95e7-fac8a94ceda0, uuid:cda24293-258c-11dc-95e7-fac8a94ceda0, uuid:bc3c7f61-51b3-11d9-8492-d0921a19fe85, uuid:2178DD18231DDD11BD9A904DDEA564E1, uuid:c64e0345-258c-11dc-95e7-fac8a94ceda0, uuid:c727393e-258c-11dc-95e7-fac8a94ceda0, uuid:be94adeb-51b3-11d9-8492-d0921a19fe85, uuid:bf2df0a2-51b3-11d9-8492-d0921a19fe85, uuid:c7fd6553-258c-11dc-95e7-fac8a94ceda0, uuid:077186EAFF0211DB947F94C06A5EB956, uuid:077186F0FF0211DB947F94C06A5EB956, uuid:c7273948-258c-11dc-95e7-fac8a94ceda0, uuid:72D0F7BBFF0F11DB947F94C06A5EB956, uuid:8045AB33FF0211DB947F94C06A5EB956, uuid:bdc2cefc-51b3-11d9-8492-d0921a19fe85, uuid:be94ade3-51b3-11d9-8492-d0921a19fe85, uuid:be79f271-258c-11dc-95e7-fac8a94ceda0, uuid:1cfbf53a-51b8-11d9-8492-d0921a19fe85, uuid:c065b7d3-51b3-11d9-8492-d0921a19fe85, uuid:a770d793-51b3-11d9-8492-d0921a19fe85, uuid:b0ab2f34-51b3-11d9-8492-d0921a19fe85, uuid:c0d87324-51b3-11d9-8492-d0921a19fe85, uuid:c4c07a82-51b3-11d9-8492-d0921a19fe85, uuid:c4c07a7a-51b3-11d9-8492-d0921a19fe85, uuid:bf5e797c-258c-11dc-95e7-fac8a94ceda0, uuid:4a08172f-e810-11da-ba1f-855b2b373a04, uuid:e9337974-267b-11dc-b5cf-a4f089c3821e, uuid:80b99ebe-e810-11da-ba1f-855b2b373a04, uuid:8b09d96c-e810-11da-ba1f-855b2b373a04, uuid:6c5c07b4-e810-11da-ba1f-855b2b373a04, uuid:b7ca84b8-51b3-11d9-8492-d0921a19fe85, uuid:c2fe8cd5-51b3-11d9-8492-d0921a19fe85, uuid:c0d8732c-51b3-11d9-8492-d0921a19fe85, uuid:c6253dec-51b3-11d9-8492-d0921a19fe85, uuid:b6c0a656-51b3-11d9-8492-d0921a19fe85, uuid:b64cf99d-51b3-11d9-8492-d0921a19fe85, uuid:b6c0a65c-51b3-11d9-8492-d0921a19fe85, uuid:b8767167-51b3-11d9-8492-d0921a19fe85, uuid:cc738037-51b3-11d9-8492-d0921a19fe85, uuid:cc032f94-51b3-11d9-8492-d0921a19fe85, uuid:9e63118c-51b3-11d9-8492-d0921a19fe85, uuid:cc032f94-51b3-11d9-8492-d0921a19fe85, uuid:77861750-e810-11da-ba1f-855b2b373a04, uuid:8c867c78-e899-11da-beed-ed889504c356, uuid:c31a7ba4-e899-11da-beed-ed889504c356, uuid:ef75cd34-e899-11da-beed-ed889504c356, uuid:ef75cd3c-e899-11da-beed-ed889504c356, uuid:1dc0be51-e8af-11da-beed-ed889504c356, uuid:c86ca7c9-3606-684e-94b3-5de0a6d4acf9, uuid:bc428ac9-59e8-304b-8cb9-21e86ab6b8ea, uuid:b37c52de-ba48-6448-9304-a4b862267c16, uuid:e5fd6468-2682-11dc-b5cf-a4f089c3821e, uuid:637038329AE0DC119545AD3574B6FAD3, uuid:e7b657c8-c3c6-1e47-b6df-bcd22d2e840f, uuid:33042eb2-07f6-394b-b41f-2fb18efcb114
Manifest Reference Document ID  : uuid:4AB4717EE520DC11AF32C1B2894D9CF7, uuid:4AB4717EE520DC11AF32C1B2894D9CF7, adobe:docid:photoshop:274b683c-e743-11d6-a982-f04d8608c94d, uuid:25E793653819DD119AC6A69CBB79117D, adobe:docid:photoshop:8ae0b77c-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:8ca69192-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:8bb02e89-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:8ca69188-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:8d65ae87-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:8ee44555-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:8e200416-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:d168657e-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f379df3c-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f379df46-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f42283d9-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f57be47b-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f6255d98-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f6ce39a3-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f4cfdd08-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f7ad7e0a-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:ee2647f7-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:eed63d96-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:ef807283-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f05bc0d0-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f05bc0d0-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f1fd30fc-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:f2a8bb29-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:b38915c9-e7e3-11da-9683-caaa1f97f51f, adobe:docid:photoshop:0d5e50af-e7e2-11da-9683-caaa1f97f51f, adobe:docid:photoshop:4959d6c7-e7e3-11da-9683-caaa1f97f51f, adobe:docid:photoshop:1698b989-e7e6-11da-9683-caaa1f97f51f, adobe:docid:photoshop:1698b992-e7e6-11da-9683-caaa1f97f51f, adobe:docid:photoshop:f7bc3ca1-e7e3-11da-9683-caaa1f97f51f, adobe:docid:photoshop:a635d3cc-e7e6-11da-9683-caaa1f97f51f, adobe:docid:photoshop:80d02bac-e7e8-11da-9683-caaa1f97f51f, adobe:docid:photoshop:d365ef99-e7ea-11da-9683-caaa1f97f51f, adobe:docid:photoshop:368dbf61-e7eb-11da-9683-caaa1f97f51f, adobe:docid:photoshop:533a1af3-e7ec-11da-9683-caaa1f97f51f, adobe:docid:photoshop:533a1afc-e7ec-11da-9683-caaa1f97f51f, adobe:docid:photoshop:d5693167-e7ee-11da-9683-caaa1f97f51f, adobe:docid:photoshop:f214ef79-e7ef-11da-9683-caaa1f97f51f, adobe:docid:photoshop:f214ef82-e7ef-11da-9683-caaa1f97f51f, adobe:docid:photoshop:c054d82e-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:cf93caec-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:cf93caf6-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:bcb10296-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:cb97f066-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c46294fc-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c539cf25-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:cc67967b-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:bcb1028c-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c31ffdfb-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:7849d0f6-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:c131f5af-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c2449e2e-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:bac6a848-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:b7859895-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:b7859895-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:29d23cae-266c-11dc-b5cf-a4f089c3821e, adobe:docid:photoshop:ca8b260d-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c9b2f072-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c8da3c97-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:2ea7e2ad-51b8-11d9-8492-d0921a19fe85, adobe:docid:photoshop:8fa17c5a-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:7c674b77-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:bd85cb0b-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:ce7968a7-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:b8950d82-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:6e534b22-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:bba24915-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:b97ce86d-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:d068c061-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:cda24292-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:bc3c7f60-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:bc9f3d9b-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c64e0344-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:c64e034e-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:be94adea-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:bf2df0a1-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c7fd6552-258c-11dc-95e7-fac8a94ceda0, uuid:5741A734FEFF11DB947F94C06A5EB956, uuid:077186EFFF0211DB947F94C06A5EB956, adobe:docid:photoshop:c7273947-258c-11dc-95e7-fac8a94ceda0, uuid:72D0F7BAFF0F11DB947F94C06A5EB956, uuid:8045AB32FF0211DB947F94C06A5EB956, adobe:docid:photoshop:bdc2cefb-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:be94ade2-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:be79f270-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:1cfbf539-51b8-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c065b7d2-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:a770d792-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:b0ab2f33-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c0d87323-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c4c07a81-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c44e371c-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:bf5e797b-258c-11dc-95e7-fac8a94ceda0, adobe:docid:photoshop:4a081729-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:7e063735-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:80b99eb8-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:8b09d966-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:6b9c0577-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:b7ca84b7-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c2fe8cd4-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c0d8732b-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:c6253deb-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:b6c0a655-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:b64cf99c-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:b6c0a65b-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:b8767166-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:cc738036-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:cb2ab72c-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:9e63118b-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:cb2ab72c-51b3-11d9-8492-d0921a19fe85, adobe:docid:photoshop:7786174a-e810-11da-ba1f-855b2b373a04, adobe:docid:photoshop:66d908e8-e828-11da-beed-ed889504c356, adobe:docid:photoshop:8c867c80-e899-11da-beed-ed889504c356, adobe:docid:photoshop:c31a7bac-e899-11da-beed-ed889504c356, adobe:docid:photoshop:ef75cd3b-e899-11da-beed-ed889504c356, adobe:docid:photoshop:056bda78-e8af-11da-beed-ed889504c356, uuid:6e41b71c-9be3-11d9-aa1d-000d93b8254a, uuid:6E83307F7CE0DC119545AD3574B6FAD3, uuid:C92AAD4695E0DC119545AD3574B6FAD3, uuid:B67324631C1A11DCA3FCAB059FB0573E, uuid:627038329AE0DC119545AD3574B6FAD3, uuid:23E793653819DD119AC6A69CBB79117D, uuid:6A9BE7643EDADC1191BCD00ED09A23E6
Format                          : application/pdf
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K7SF5D8232-4V2

Navigation menu