Belkin F7C031 WeMo Link User Manual Statement

Belkin International, Inc. WeMo Link Statement

Contents

User Manual (Statement).pdf

The following paragraphs are required by the FCC and
prove that this product meets all regulatory limits with
regard to radio interference and radiation exposure.
If you use this product as intended you will have no
issues with either.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 12045 E. Waterfront Drive,
Playa Vista, CA 90094, declare under our sole
responsibility that the product, F5Z0489, to which this
declaration relates, complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment
and the receiver.
• Connect the equipment to an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and
your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Industry Canada Statement / Avis d’Industrie Canada
This digital apparatus complies with CAN ICES-3(B).
Cet appareil numérique conforme à la norme NMB-3(B)
du Canada.
This device complies with RSS-210 of the Industry
Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie
Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible
de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20cm between the radiator and
your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition
aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé
avec un minimum de 20 cm de distance entre la source
de rayonnement et votre corps.
INFORMATION TO USER OF WEMO SMART LED BULBS:
This device is not intended for use with
emergency exits.
Not for use with dimmers.
Do not use where directly exposed to water.
AVIS AUX UTILISATEURS D’AMPOULES DEL
INTELLIGENTES WEMO:
Ce produit n’est pas destiné à être
utilisé pour les sorties d’urgence.
Ne convient pas pour une utilisation avec variateur.
Ne pas utiliser dans les endroits directement
exposés à l’eau.
INFORMATION TO USER OF WEMO LINK:
Use indoors and in dry location only
This product may only be plugged in to
socket outlets that are easily accessible
AVIS AUX USTILISATEURS DU LIEN WEMO:
Pour usage à l’intérieur et dans des
endroits secs seulement.
Ce produit ne doit être branché que sur
des prises de courant faciles d’accès.
8820fc01933 Rev. A01
0.00 x 0.00 x 0.00
Business Unit:
Program Manager:
Packaging Engineer:
Material:
Blank Size (in):
Side Shown:
L x W x D (mm):
DIE LAYOUT
0
Unit:
Flute/Grain:
REV
Intermediate
PRINT SIDE
0 x 0 x 0
L x W x D (in):
8 Pt. SBS
80 gsm wood free paper
16 pt PET
27
/
8
[73.025]
33
/
8
[86.005]
23
[584.200]
83
/
16
[207.962]
7
[177.800]
1419
/
32
[370.681]
31
/
4
[82.550]
Front Back
87
/
8
[225.425]
83
/
8
[212.883]
Front Back
IN/MM
Drawing Scale 1:1
Retail Outside Dimension (Including Hang Tab)
DO NOT PRINT
DIE LINES, PRINTERS NOTES
PRINT SPECS:
DIE/MATERIAL SPECS:
1202.630 x 593.725
47.348 x 23+3/8
Die Line File:
Core
Matthew Duffy-LR
SBS-24/.61mm/400g C1S
IDL_MSKU_DUAL CHARGE N SYNC DOCKS
Color Plates: Notes:
Artwork File:
horizontal
00
RELEASE DATE: 5/16/2014
Tolerance:+/- 1/32" - 0.8mm
Blank Size (mm):
Finish:
DIELINE:
THIS DOCUMENT & THE INFORMATION
IN IT ARE THE CONFIDENTIAL PROPERTY
OF BELKIN INTERNATIONAL AND MUST
NOT BE COPIED, REPRODUCED OR USED
IN ANY MANNER WITHOUT THE WRITTEN
CONSENT OF BELKIN CORPORATION.
IT MUST BE RETURNED UPON REQUEST
This dieline works for following skus (if any):
F8J136; F8J137
0.00 x 0.00 x 0.00
Business Unit:
Program Manager:
Packaging Engineer:
Material:
Blank Size (in):
Side Shown:
L x W x D (mm):
DIE LAYOUT
0
Unit:
Flute/Grain:
REV
Intermediate
PRINT SIDE
0 x 0 x 0
L x W x D (in):
8 Pt. SBS
80 gsm wood free paper
16 pt PET
27
/
8
[73.025]
33
/
8
[86.005]
23
[584.200]
83
/
16
[207.962]
7
[177.800]
1419
/
32
[370.681]
31
/
4
[82.550]
Front Back
87
/
8
[225.425]
83
/
8
[212.883]
Front Back
IN/MM
Drawing Scale 1:1
Retail Outside Dimension (Including Hang Tab)
DO NOT PRINT
DIE LINES, PRINTERS NOTES
PRINT SPECS:
DIE/MATERIAL SPECS:
1202.630 x 593.725
47.348 x 23+3/8
Die Line File:
Core
Matthew Duffy-LR
SBS-24/.61mm/400g C1S
IDL_MSKU_DUAL CHARGE N SYNC DOCKS
Color Plates: Notes:
Artwork File:
horizontal
00
RELEASE DATE: 5/16/2014
Tolerance:+/- 1/32" - 0.8mm
Blank Size (mm):
Finish:
DIELINE:
THIS DOCUMENT & THE INFORMATION
IN IT ARE THE CONFIDENTIAL PROPERTY
OF BELKIN INTERNATIONAL AND MUST
NOT BE COPIED, REPRODUCED OR USED
IN ANY MANNER WITHOUT THE WRITTEN
CONSENT OF BELKIN CORPORATION.
IT MUST BE RETURNED UPON REQUEST
This dieline works for following skus (if any):
F8J136; F8J137
PR# 41256
File name
SKU# F5Z0489FC
P#/mKTG# 8820FC01933 REV.A01
DeSiGneR(S) LYNETTE
DaTe 5/22/14 VeRSiOn 04
INS_F5Z0489fc_8820fc01933_RevA01_FCC_Insert

Navigation menu