Belkin F7U052 WIRELESS CHARGER User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	3780763
Application ID	hph2jEGIkCRkiFrOFPcYfQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	299.23kB (3740435 bits)
Date Submitted	2018-03-14 00:00:00
Date Available	2018-09-10 00:00:00
Creation Date	2018-03-07 11:36:56
Producing Software	Microsoft: Print To PDF
Document Lastmod	2018-03-07 11:36:56
Document Title	Microsoft Word - User and FCC information F7U052 revised 2
Document Author:	Rajesh.Karki

°.“,° belkin®
BOOSTTUP’"l
Wireless Charging Stand
Pupitre de charge sans fil
Base de carga inalémbrica
SKU/MODEL: F7U052
UGS / MODELE : F7U052
NUMERO DE SKU/MODELO: F7U052
Product and Warranty Information
lnformations sur le produit et la garantie
lnformacién del producto y de la garantia
a,
a"IFFCCEQ‘
I”
Safety Instructions:
1.
Please read these instructions before using the device to ensure
safe and proper use.
. Connect the wall adapter of the wireless charging pad into a socket
outlet that is close by and is easy to disconnect from the source.
. Use indoors and in a dry location only; keep away from wet or
damp locations
. Keep wireless charging pad and wall adapter away from any
liquids or moisture.
Unplug the wireless charging pad when unused for long periods
oftime.
. Do not store your device in very hot or very cold areas. It is
recommended to use your device at room temperatures.
Caution: if you experience problems with the wireless charging
pad, please discontinue use, unplug the wall adapter of the wireless
charging pad from the AC socket, and contact Belkin forassistance.
Do not use if visible defects are observed on the wireless charging
pad or wall adapter. Do not attempt to service or disassemble.
Consignes de sécurité
1.
Veuillez lire ces instructions avant toute utilisa-tion afin d'utiliser
cet appareil de maniere sure et adéq uate.
Brancher l'adaptateur mural du socle de charge sans fil sur une
prise de coura nt proche et facile a débrancher de la source.
Utiliser l'appareil seulement a I'inte'rieur et dans des endroits
secs; tenir éloigné de tout empIa-cement humide ou mouille‘.
. Tenir le socle de charge sans fil et l'adaptateur mural éloignés de
tout liquide ou environne-ment humide.
Débrancher Ie socle de charge sans fil lorsqu‘il n'est pas utilisé
pendant une période prolongée.
Ne pas entreposer votre appareil dans un endroit exposé au
froid intense ou a des tempe’ratures e'leve'es. || est recommande‘
d'utiliser votre ap pa-reil a température ambiantea
Attention : Si vous rencontrez des problemes avec le socle de
charge sans fil, veuillez cesser de l'utiliser, débrancher l‘adaptateur
mural du socle de charge sans fil de la prise de courant et com-
muniquer avec Belkin pour obtenir de I'assis-tance.
Ne pas utiliser sides défauts visibles ont été constatés sur le
socle de charge sans fil ou I'adap-tateur mural. Ne pas essayer de
le démonter ou d'en faire I'entretien.
ESPANOL
lnstrucciones de seguridad:
1.
Por favor, lea estas instrucciones antes de usar el disposifivo para
asegurar un uso seguro y adecuado.
. Conecfe el adaptador de pared de la base de carga inala’mbrica
en un tomacorriente cercano en el que sea sencillo desconectar la
base.
. Usela solo en interiores y en lugares secos y sin humedad;
manténgala lejos de lugares mojados a con humedad.
. Mantenga la base de carga inala’mbrica y el adapfador de pared
lejos de ll'quidosy humedades.
. Desconecte la base de carga inalémbrica del tomacorriente
cuando no la utilice durame largos periodos de Tiempo.
No almacene el dispositivo en areas con mucho caloro mucho
frio. Se recomienda usar el dispositivo con Temperature ambien’re.
Precaucién: si sufre problemas con la base de carga inalambrica
deje inmediata meme de usarla, desconecte eI ada p’rador de
pared de la base del tomacorriente CA y contacte con Belkin para
obfener asistencia técnica.
No utilizar si hay defectos visibles en la base de carga
inala’mbrica 0 el adaptador de pared‘ No intente hacer al
disposifivo un mantenimiento ni desarmarlo.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
belkin.com
We. Belkin International. lnc.. of 12045 E. Waterfront Drive, Playa Vista,
CA 90091.. declare under our sole responsibility that the product
F7U052, to which this declaration relates, complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference. and (2) this device
must accept any interference received. including interference that may
cause undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits
for a Class 8 digital device. pursuant to Part 15 ofthe FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. it this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on. the user is encouraged to try and
correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna.
0 Increase the distance between the equipment and the receiver.
. Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/T V technician for help
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user‘s authority to
operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. To
maintain compliance with FCC RF exposure compliance requirements,
please follow operation instructions as documented in this manual.
This equipment should be installed and operated with a minimum
distance of 10 cm between the radiator and your body.
IMPORTANT NOTE:
Industry Canada Statement
This device complies with RSS-216 of the Industry Canada Rules.
Operation is subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Radiation Exposure State ment:
This equipment complies with IC radiation exposure limits set forth
for an uncontrolled environment. This equipmentshould be installed
and operated with a minimum distance of 10cm between the radiator
and your body.
Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-3(B)/NM 8-3 (B).
NOTE IMPORTANTE:
énoncé d'lnd ustrie Canada
Ce dispositif est conforme a la norme CNR- 216 standard d‘lndustrie
Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes : (1) Ie
dispositif ne doit pas produire de brouillage prejudiciable. et (2) ce
dispositif doit accepter tout brouillage recu, y compris un brouillage
susceptible de provoquer un fonctionnement indesirable.
De’claration d’exposition aux radiations:
Cet équipement est conforme aux Iimites d’exposition aux
rayonnements IC établies pour un environnement non controle'. Cet
équipement doit étre installé et utilise‘ avec un minimum de10 cm de
distance entre la source de rayonnement et votre corps.
HOW DO | GET HELP?
If you have a question about your product or experience a problem
with it. please go to http://www.belkin.com/support or http://support.
|inl
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (72 0 obj) not found at 3738667

EXIF Metadata provided by EXIF.tools