Belkin F8T012 CLASS 1 EDR ADAPTOR User Manual P74768 F8T008 9 QIG indd

Belkin International, Inc. CLASS 1 EDR ADAPTOR P74768 F8T008 9 QIG indd

Users Manual

EnBluetooth™ USB AdapterF8T008 - F8T009 Connect your peripherals and computing devices, without cablesQuick Installation QuideP74768_F8T008-9_QIG.indd 1 3/23/05 2:46:51 PM
IntroductionPC System Requirements• PC-compatible computer, CPU speed of 200MHz or above• Memory: 64MB or above, 128MB recommended• One available USB port, USB 1.1 standard • Windows® 98 SE, Me, 2000, and XPMac® System Requirements• One available USB port, USB 1.1 standard• Mac OS® X v10.3 and higher*Product Contents• Bluetooth USB Adapter • CD-ROM for installation software and documentation• User Manual• Quick Installation Guide*Mac OS X driver and software provided by Apple®.1P74768_F8T008-9_QIG.indd 1 3/23/05 2:46:53 PM
232Step 1: Software SetupSoftware Setup for Windows 98 SE, Me, 2000, and XPTo install the software for the USB Adapter, follow the instructions below:Note: The installation process for Windows XP may look slightly different from Windows 98 SE, Me, and 2000. Note: Do not insert the USB Adapter into the USB port prior to software installation. 1. Insert the software installation CD-ROM into the PC’s CD-ROM drive.2. The “Software InstallShield Wizard” window appears. Click on “Next” to begin the installation process.P74768_F8T008-9_QIG.indd 2 3/23/05 2:46:54 PM
2323. Choose “I accept the terms in the license agreement” to accept the license agreement. Click on “Next” to continue. 4. Specify the location where the software files will be installed on your hard drive. It is recommended that you install the software in the default directory “C:\Program Files\belkin\Bluetooth\Software\”. Click on “Next” to continue. Step 1: Software SetupP74768_F8T008-9_QIG.indd 3 3/23/05 2:46:55 PM
454Step 1: Software Setup5. Confirm that the device software is ready to be installed and click on “Install”.6. The InstallShield Wizard will begin to install the Belkin Bluetooth Software. This may take several minutes. P74768_F8T008-9_QIG.indd 4 3/23/05 2:46:56 PM
454Step 1: Software Setup7. During the installation process you may be prompted to insert your USB Adapter. If your USB Adapter is not plugged into your computer at this time, you may insert it into an available USB 1.1-compliant port on your desktop or notebook computer, then click “OK” to continue. Click on “Cancel” to continue installation without the Bluetooth device inserted. Refer to the “Hardware Installation” section of this User Manual for instructions for installing the hardware.Note: If at any time during the installation process you receive a “Driver Signature Notice”, click “OK” to continue the installation process. P74768_F8T008-9_QIG.indd 5 3/23/05 2:46:57 PM
676Step 1: Software Setup8. Confirm the completion of the software installation; click “Finish” and restart the system if prompted to do so.P74768_F8T008-9_QIG.indd 6 3/23/05 2:46:57 PM
676Step 2: Hardware SetupHardware Setup for Windows 98 SE, Me, 2000, and XPFollow these instructions to install your USB Adapter on your PC.Note: Your USB Adapter is sensitive to static electricity, which can damage its delicate electrical components. To protect your device, always touch the metal chassis of your computer before handing the USB Adapter. This will ground any potential electrostatic discharge. Avoid touching the metal connector when handling the USB Adapter. Dry weather conditions or walking across carpeted floors may cause you to acquire an electrostatic charge.1. Connect the USB Adapter directly to an available USB A-type connector on your desktop or notebook computer. Your system should register a new USB device found.2. Choose “Install from a list or specific location”; then click “Next”.P74768_F8T008-9_QIG.indd 7 3/23/05 2:46:58 PM
898Step 2: Hardware Setup3. Browse for the location of the device driver “:\Program Files\Belkin\ Bluetooth\Software\bin\” then click “Next”.4. If you receive the following “Hardware installation notice”, click on “Continue Anyway” to continue with the installation process.P74768_F8T008-9_QIG.indd 8 3/23/05 2:46:59 PM
898Step 2: Hardware Setup5. A window will appear that confirms the completion of the hardware installation; click on “Finish” to complete the installation process.P74768_F8T008-9_QIG.indd 9 3/23/05 2:47:00 PM
1010Step 3: Uninstalling the SoftwareUninstalling the Software for Windows 98 SE, Me, 2000, and XP Follow these instructions to uninstall your USB Adapter on your PC.1. Insert the CD-ROM included with your USB Adapter.2. This “InstallShield Wizard” should automatically load. If it does not load, explore the CD and run the “Setup.exe” file.3. The “InstallShield” window should now appear. Click “Next” to continue with the uninstall process.P74768_F8T012-13_QIG.indd 10 3/23/05 2:47:00 PM
© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc. and are used by Belkin Corporation under license. Mac, Mac OS, and Apple are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.Belkin Corporation501 West Walnut Street,Compton, CA 90220-5221, USA+1 310 898 1100+1 310 898 1111 faxBelkin Ltd.Express Business Park, Shipton Way Rushden NN10 6GL, United Kingdom+44 (0) 1933 35 2000+44 (0) 1933 31 2000 faxBelkin B.V.Boeing Avenue 3331119 PH Schiphol-Rijk, The Netherlands+31 (0) 20 654 7300+31 (0) 20 654 7349 faxBelkin Ltd.7 Bowen Crescent, West GosfordNSW 2250, Australia+61 (0) 2 4372 8600+61 (0) 2 4372 8603 faxBelkin Tech SupportUS: 310-898-1100, ext. 2263 800-223-5546, ext. 2263Europe: 00 800 223 55 460Australia: 1800 235 546New Zealand: 0800 235 546Singapore: 800 616 1790Bluetooth™ USB AdapterP74768P74768_F8T008-9_QIG.indd 12 3/23/05 2:47:00 PM
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .Consult the dealer or an experienced radio/TV technician for help. FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu