Belkin F8T016 Bluetooth (class II) User Manual BT c1cu eng Manual
Belkin International, Inc. Bluetooth (class II) BT c1cu eng Manual
Belkin >
Users Manual
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
rence to radio or television reception, which can be determined by turning the equipment off and on, the
is encouraged to try to correct the interference by one of the following measures:
interfe
Reorient or relocate the receiving antenna.
user
. Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment. (Example - use only
shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
This device complies with Part 15 of the FCC Rules and RSS-210 of Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
User Manual
1. Package Content
Before installation, please check if the following package
content is missing. If anything missing, please contact your
local distributor.
z Bluetooth Mini USB Adapter
z Software CD including User manual, Driver and utility
2. Installation steps
NOTE：Please install the USB Bluetooth Software Driver before
plugging the USB adapter !
2-1.Place the installation CD-ROM into the PC, the setup should
start automatically. If the setup does not start, please go to
Windows Explorer, locate the CD-ROM and run [setup.exe].
2-2. On the Welcome screen click [Next] to continue.
2-3. Read the License Agreement and select [I accept the terms in
the license agreement]. Click [Next].
2-4. Click [Next] to accept the default destination folder, click
[Change] to browse to a new destination folder for the Bluetooth
software.
2-5.Click [Install] to begin the installation of the Bluetooth
software.
2-6. For Windows 2000/XP users, a [Driver Signature Notice]
window appears, please click the [OK] button.
2-7.The [Bluetooth device not found] window appears. Plug the
USB Bluetooth adapter into the USB port. Click [OK].
2-8. Click [Finish] to complete the Bluetooth software installation.
2-9. Click [Yes] to restart the computer and complete the
installation.
2-10. After reboot your pc, the CD-ROM driver will be completely
installed and the [Bluetooth icon] resides in the Windows system
tray.
2-11. Click [start/(settings)/controlpanel/system/devicemanager].
Check under“ Bluetooth Devices” then a “ Bluetooth Device”
is installed.
2-12. If the information is not presented, please unplug the Mini
USB adapter, re-plug the CD-ROM to initiate the driver.