Belkin F8Z896 LiveAction Camera Remote (F8Z896) User Manual Fridge Mount QIG

Belkin International, Inc. LiveAction Camera Remote (F8Z896) Fridge Mount QIG

New User Manual

LiveAction Camera Remote User Manual LiveAction Camera Remote [show] Two AAA (LR03) batteries [show] Install the batteries: The Remote takes two AAA (LR03) batteries. 1. Slide the battery cover to remove it from the remote. [illustration 1, show arrow sliding battery cover off] 2. Insert the batteries, paying attention to the + and – markings inside the battery compartment. 3. Slide the battery cover back on. Pair the remote with your iPhone: 1. Turn on the remote using the switch on the side. [illustration 2] 2. Visit the Settings app on your iPhone. [show Settings app icon] Choose General, then Bluetooth. Make sure Bluetooth is On. 3. Press and hold the Pair button on the remote until the green light blinks rapidly, then release it. This should take three seconds or so. 4. LiveAction Remote will appear in the list of Bluetooth devices. Touch the LiveAction Remote list item. 5. If your iPhone asks for a PIN, enter 0000. Your remote is now paired with your iPhone. Get the LiveAction app: 1. The Remote works with the Belkin LiveAction camera app. Visit the App Store and search for LiveAction. [show LiveAction icon – get it from Lucky Diaz if you need it] 2. When you find the app, install it. (It’s free.) Take pictures and video: 1. Open the Belkin LiveAction app. 2. Use the black button on the remote to take still pictures. Use the red button on the remote to start and stop taking video. [illustration 3 indicating buttons] 3. Still pictures (frames of video) can be taken while recording video; just press the black button. Prop your iPhone with the included stand: 1. Remove the stand from the body of the remote by grasping the stand and pulling it from the remote body. [illustration 4 with arrow pulling stand from remote body] 2. Rotate the leg of the stand to the desired angle. 3. Fit the jaws of the stand over your iPhone. The jaws will spread to grip
tightly, even over a case. [illustration 5] Information Belkin International, Inc., Limited 1-Year Product Warranty What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin warrants the Belkin product for one year. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use. What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed per the instructions provided on this guide, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. This warranty is null and void if the Belkin LiveAction Camera Remote (F8z896tt) is used with any phone other than an iPhone 4. Carefully follow these instructions. Misuse or improper installation may cause harm to your iPhone 4. Belkin is not responsible for any damage that may be done as a result of the misuse or improper installation of this product, including but not limited to use with aphone other than iPhone 4.
How to get service. To get service for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. Belkin Tech Support US http://www.belkin.com/support UK http://www.belkin.com/uk/support Australia http://www.belkin.com/au/support New Zealand http://www.belkin.com/au/support Singapore 1800 622 1130 Europe http://www.belkin.com/uk/support © 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. iPad is a trademark of Apple Inc., registered in the U.S. and other countries. 3M and Command are trademarks of 3M. Safety Warnings Your Stand and Remote requires full concentration and both hands to install. Do not attempt to configure your Stand and Remote while driving. Make sure the configuration of your Stand and Remote are properly established before driving. Do not attempt to adjust or retrieve an unsecured Stand and Remote or iPhone while driving. Adjust the position of your Stand and Remote so that your Stand and Remote and your iPhone do not interfere with any of the operating controls of the vehicle. Failure to observe this safety warning can result in injury or property damage. Belkin does not assume any responsibility for personal injury or property damage incurred due to hazardous driving as a result of interaction with the Stand and Remote, the iPhone, or the vehicle.
FCC Statement FCC ID: K7SF8Z896 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Belkin International, Inc., is not responsible for any interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate this equipment. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Caution: Exposure to Radio Frequency Radiation. The device shall be used in such a manner that the potential for human contact during normal operation is minimized. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Navigation menu