Belkin F9K1001V1 N150 Wireless N Router User Manual

Belkin International, Inc. N150 Wireless N Router

User manual

User Manual 8820-00773 Rev. A00 N150 Wireless N RouterF9K1001v1
TABLE OF CONTENTSGetting Started ........................................... 1What’s in the Box .............................................1Initial Setup ..................................................1Advanced Tools & Settings.....................................6The Belkin Router Manager ....................................7Manual Setup Using Your Browser ..............................8Adding Computers to Your Network .............................9Getting to Know Your Router .............................. 11Front Panel .................................................11Back Panel .................................................12Technical Details ........................................ 13Technical Features ..........................................13System Requirements ........................................14Using Your Router ....................................... 15Enabling Auto Update on Your Belkin Router.....................15Updating Your Router via Your System Tray (Windows) or Menu Bar (Mac) .................................17Updating the Router’s Firmware via the Web Interface ............18Resetting the Router .........................................22Restoring Your Router to Factory Defaults .......................22Restoring the Router to Default Settings Using the Web Interface ...23Troubleshooting, Support, and Warranty ...................26Troubleshooting .............................................26Technical Support ...........................................33Belkin International, Inc., Limited 2-Year Product Warranty .........34Regulatory Information ................................... 37FCC Statement..............................................37CE Statement ...............................................38
1GETTING STARTEDWhat’s in the BoxN150 Wireless Router Ethernet cable (attached to router)Power supply (attached to router)Network information card (attached to router)Belkin Setup CD with User ManualInitial SetupWhere to Place Your Router For the best results, place the Router next to your modem in an open location away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal.
2GETTING STARTED2 3modem1How to Set It Up
3GETTING STARTED1. Connect your Router’s Ethernet cable to your modem’s Ethernet port (on the back of your modem). This port might be labeled differently on your particular modem. If you are adding a Router for the first time, this port may be connected to your computer by an Ethernet cable. It is OK to disconnect your computer and plug the Router into the modem instead.2. Plug the Router’s power supply into a wall outlet.3. Put the CD into your computer. If the CD doesn’t open automatically, please browse to your CD drive and double-click on the Belkin Setup CD icon.4. Click the Setup icon on the CD menu.Setup
4GETTING STARTED5. After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router. Store the card under the base of your Router for future reference.
5GETTING STARTED6. A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router.During setup you may be asked for additional information.You may need to enter a username and password provided by your ISP. This username and password is likely to be found on materials that came from your ISP when you signed up for service. If necessary, you may need to contact your ISP to retrieve your username and password.If you have a static IP address, you may need to enter additional information also provided by your ISP.If your computer doesn’t have a wireless adapter, or the setup software is unable to control it, you may be asked to connect your computer to the Router with a network cable.
6GETTING STARTEDAdvanced Tools & SettingsAfter the initial setup is complete, you have the option to change settings like your network name, security type, and password. To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to change:Network Name & Security – Personalize your network name (SSID), password, and strength of wireless security.Internet Service Provider & Login Settings – Have you moved or changed Internet Service Providers? If you’d like to change these settings without running through the setup process again, this is the place.
7GETTING STARTEDThe Belkin Router ManagerThe Belkin Router Manager appears in your system tray (Windows) or menu bar (Mac). Its icon indicates the current status of your Router and also allows you to access your Router’s settings to make changes. It also provides quick access to software that came bundled with your Router.To access the Router settings, click on the icon and select from the menu that appears.The status of your Router is shown by the Belkin Router Manager icon, which closely mimics the light on the front of the Router.Blue: You are connected to your Belkin Router and it is connected to the Internet.Amber: You are connected to your Belkin Router, but it is not connected to the Internet.belkin.310Router SettingsUser ManualCheck for UpdatesOptionsExit
8GETTING STARTEDIn your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1” in your browser (you do not need to type in anything else such as “http://” or “www”). Then press the Enter key.Manual Setup Using Your Browser
9GETTING STARTEDAdding Computers to Your NetworkWireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps.Using the CD1. Put the Setup CD into your computer. If the CD doesn’t open automatically, browse to your CD drive and open the Belkin Setup CD icon.2. Click the Setup icon on the CD menu.3. After a brief installation, the setup software will ask you for the network name and password from the network information card that came with your Router. This card is most likely now located underneath the foot of your Router in the provided card slot.4. A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router.Note: The setup software runs only on Windows and Mac OS X systems.
10GETTING STARTEDManuallyIf you choose not to use the included Setup CD for adding additional computers or wireless devices, you can manually add these items to your network.1. Locate the wireless-network-connections option on your computer or wireless device.2. Select your Belkin Router from the list of available networks. You can identify your Belkin Router by locating the network name (SSID) from the card located underneath the foot of your Router.3. Enter your network password (located on your network information card).Your wireless device will take a few moments to connect to your network. If the connection is not made the first time, try this process again. If you still have difficulty connecting to your network after trying this process a few times, see the “Troubleshooting” section in this manual for help with connecting to your network.Note: In some cases you may be prompted to select the security type. It is printed on the card for your convenience.Using the WPS Button1. Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “WPS,” “PBC,” or “Security” button on the device itself.2. Within two minutes, press the WPS button on your Router.The WPS light (small light above WPS button) will blink blue while it listens for your Wi-Fi device. Once a connection is established, the light will turn blue and then go out. If a connection is not established, the light will blink amber. You may repeat the process to try again.You can repeat this process for each WPS-enabled device you’d like to add to your network.
AB11GETTING TO KNOW YOUR ROUTERA) Router Status LightYour Router’s status is shown by the light on the front.Off: The Router is not plugged into a power source.Blinking Blue: The Router is starting up.Solid Blue: The Router is connected to the Internet.Blinking Amber: The Router can’t detect the modem. Either the modem is off, is not plugged into the Router, or is unresponsive.B) Wi-Fi Protected Setup (WPS) Light and ButtonThe WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Router, see “Getting Started > Adding Computers to Your Network > Using the WPS Button”.The small light near the WPS button shows what is happening while you are using WPS to establish a connection.Off: IdleBlinking Blue: The Router is listening for a WPS-enabled computer or other device.Solid Blue: The Router has made a secure connection with the computer or other device.Amber: A connection was not created.Front Panel
ABCD12GETTING TO KNOW YOUR ROUTERA) Modem (WAN) ConnectorConnect your modem to this port using an Ethernet cable.B) Wired (LAN) ConnectorsConnect computers and other wired network devices to these ports using Ethernet cables.C) Reset ButtonThis button is used to restart your Router in rare cases when it functions incorrectly. Resetting the Router will preserve your settings. This button may also be used to restore the factory default settings. Please see the Troubleshooting section for more information.D) Power ConnectorConnect the included power supply to this jack.Back Panel
13TECHNICAL DETAILSTechnical FeaturesIntegrated 802.11n Wireless Access PointThe N150 technology enhances your Router’s wireless capabilities, allowing for data transfer speeds of up to 150Mbps across your network.NAT IP Address SharingTo save you the cost of adding IP addresses per computer in your house, your Belkin Router uses Network Address Translation (NAT) technology, allowing you to share a single IP address across your network.SPI FirewallYour Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses.Universal Plug-and-Play (UPnP) CompatibilityThe UPnP (Universal Plug-and-Play) feature in your Router offers seamless operation of voice and video messaging, games, and other applications that are UPnP-compliant.Web-Based Advanced User InterfaceYou can easily make changes to your Router’s advanced settings through your web browser. These changes can be made from any computer on your network.Belkin Router MonitorThe Belkin Router Monitor application helps you to monitor your Router’s status and change network settings. Integrated 4-Port 10/100 SwitchYour Router has a built-in, 4-port network switch to allow your wired computers to share: printers, data, MP3 files, digital photos, and much more.
14TECHNICAL DETAILSSystem RequirementsRouter Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connectionAt least one computer with an installed network interface adapterTCP/IP networking protocol installed on each computerRJ45 Ethernet networking cableInternet browserSetup SoftwareA computer running Windows® XP SP3 or higher, Windows Vista®, or Windows 7; or Mac OS® X v10.5 or v10.6 only Minimum 1GHz processor and 512MB RAM600MB of free hard-drive space for installation
15USING YOUR ROUTEREnabling Auto Update on Your Belkin RouterThe Router has the capability to automatically check for a newer version of firmware and alert you when it’s available. You can choose to download the new version or ignore it. By default this feature is disabled. If you want to enable it, select “Enable” and click “Apply Changes”.Note: We recommend you use a computer that has a wired connection to the Router.Setup steps:1. Open a web browser on the computer. 2. In the address bar of the web browser, type “http://192.168.2.1”. 3. Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.
16USING YOUR ROUTER165. Toward the lower-half side of the screen you will find “Auto Update Firmware Enabling”. 6. Select “Enable” by clicking the radio button and then click “Apply Changes” at the bottom of the screen.4. Click on “System Settings” in the left-hand column under the “Utilities” heading.
17USING YOUR ROUTER17Updating Your Router via Your System Tray (Windows) or Menu Bar (Mac) Once you have completed the setup process, you will need to update the new software for your Router. This can be done easily via your computer’s system tray or menu bar.Setup steps:1. Click on the green Belkin Router Manager icon (right-click for Windows) in your system tray (Windows) or menu bar (Mac).2. Select “Check for Updates” or “Update Available” from the menu.3. You should now see the Belkin Updater window.4. Click on the “Install Update” icon.
18USING YOUR ROUTER18Updating the Router’s Firmware via the Web InterfaceThe following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself.Setup steps:1. Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.) 2. Save the file to a location on your computer where you can get to it easily, such as your desktop. 3. Connect the computer to one of the four LAN ports on the Router.
19USING YOUR ROUTER194. Open a web browser on the computer. 5. In the address bar of the web browser, type “http://192.168.2.1” and press “Enter” on your keyboard. 6. Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.7. Click on “Firmware Update” toward the bottom of the left-hand menu.
20USING YOUR ROUTER208. Click the “Browse” button toward the middle of the screen to search for the file you saved previously.Note: The firmware version in the images below is depicted as an example. Your file name will vary depending on your model and version. 9. Select the firmware file by left-clicking on it and then click the “Open” button in the lower-right corner of the window. This will take you back into the Router’s interface.
21USING YOUR ROUTER2110. Click the “Update” button.11. A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”. 12. A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the Router. Click “OK” once more. Congratulations. The firmware has been updated successfully.
22USING YOUR ROUTERResetting the RouterReset Button – Red The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password.Resetting the Router Push and release the “Reset” button. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the reset is complete.Restoring Your Router to Factory DefaultsPress and hold the “Reset” button for at least 10 seconds, and then release it. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the restore is complete.
23USING YOUR ROUTERRestoring the Router to Default Settings Using the Web InterfaceSymptomsYou need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings.Setup steps1. Open a web browser on the computer. 2. In the address bar of the web browser, type “http://192.168.2.1”. 3. Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.
24USING YOUR ROUTER4. Click on “Restore Factory Defaults” in the left-hand column under the “Utilities” heading.5. Click on the “Restore Defaults” button.
25USING YOUR ROUTER6. A warning box will open that says, “Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK”.7. The Router will begin the restoring process. Once the restore is complete, the Router will reboot.Note: This may take several minutes. Your Router has successfully been restored to its factory settings.
26TROUBLESHOOTING, SUPPORT, AND WARRANTYTroubleshootingThe Setup CD does not automatically start.If Belkin Setup does not run when you insert the CD-ROM, your computer may not be configured to open CDs automatically.If Belkin Setup does not appear within 15 seconds, browse to your CD-ROM drive and open the “Belkin Setup” icon. Alternatively, you may visit http://router/ and perform the setup manually. Please see “Manual Setup Using Your Browser” earlier in this manual for more information.Belkin Setup cannot find my Router.If Belkin Setup is not able to communicate with your Router during the installation process, please check the following items.1. Make sure that the wireless hardware on your computer is turned on, if available.2. Try connecting your computer to one of the four “wired” ports on the Router with an Ethernet cable.3. Ensure that the Router is on. The front-panel light should be on.4. Unplug the Router’s power supply for 10 seconds, then plug it back in.5. There may be firewall software on your computer preventing an outgoing connection. You may choose to temporarily disable this software before attempting setup.If Belkin Setup still cannot find the Router, you might choose to do a manual setup. Refer to “Manually Configuring Network Settings” in this manual for details.
27TROUBLESHOOTING, SUPPORT, AND WARRANTYBelkin Setup cannot connect my Router to the Internet.If Belkin Setup is not able to connect the Router to the Internet, please check the following items:1. Use the troubleshooting suggestions within Belkin Setup.2. If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP’s domain may be at the end of the name. Example: “myname@myisp.com”. The “@myisp.com” part of the user name may need to be typed as well as your user name.3. If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method.Belkin Setup completed installation, but I cannot browse the Web. The light on the front of my Router is blinking amber.1. Make sure the Router is connected to your modem with an Ethernet cable via the Router’s one WAN (modem) port.2. Unplug the modem from its power source and make sure that it goes dark. Then reapply power to the modem.3. Unplug your Router’s power supply, wait 10 seconds, and plug it back in. This will cause the Router to try to reestablish communication with the modem.
28TROUBLESHOOTING, SUPPORT, AND WARRANTYBelkin Setup completed installation, but I cannot browse the Web. The light on the front of my Router is solid amber.1. Use the troubleshooting suggestions within Belkin Setup.2. If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP’s domain may be at the end of the name. Example: “myname@myisp.com”. The “@myisp.com” part of the user name may need to be typed as well as your user name.3. If you have a static connection, your ISP will have assigned you an IP address, subnet mask, and gateway address. Please re-run Belkin Setup and enter this information when a static connection is mentioned.4. You may need to configure your Router to meet the specific requirements of your ISP. To search our knowledge base for ISP-specific issues, go to: http://www.belkin.com/support and type in “ISP”.5. If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method.I can’t connect to the Internet wirelessly.If the light on the front of the Router is solid blue, then your Router is connected to the Internet. You may not be connected to the Router’s wireless network. Please refer to “Adding Computers to Your Network” in this manual for instructions.If your Windows XP computer is running SP2, you will not be able to set up the Router via the wireless setup process. You will need to either update to Windows XP SP3 or complete the setup via a wired connection.
29TROUBLESHOOTING, SUPPORT, AND WARRANTYI can’t connect to the Internet wirelessly and my network name is not listed in Available Networks.1. Verify that your Router is on and the front-panel light shows solid blue.2. If you are far from the Router, you might try moving closer to see if you might have been out of range.3. Using a computer attached to the Router via a network cable, visit http://router/ and ensure that “Broadcast SSID” is ON. This setting is found on the “Channel and SSID” page.My wireless net work per formance is slow, inconsistent, suffers from weak signal, or I’m having difficulty maintaining a VPN connection.Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that connection speed may decrease as you move farther away from the Router.In order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the Router if possible.Changing the wireless channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. See the section titled “Changing the Wireless Channel” for instructions on how to choose other channels.
30TROUBLESHOOTING, SUPPORT, AND WARRANTYI’ve installed this new Router and some of my network clients (computers, game consoles, etc.) are now unable to connect.Your new Router came pre-configured with a network name and password, found printed on an attached card. All clients must use this network name and password to connect wirelessly to your Router. You will need to find the network settings on your client, select the network name printed on the card from the list of available networks, and enter the password when prompted to join the wireless network.Limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open “Network Connections”, and double-click on your wireless card’s connection. In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the rate property.Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment. Note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless card’s user manual.
31TROUBLESHOOTING, SUPPORT, AND WARRANTYDoes the Router support Wireless Protected Access (WPA) security?The Router ships with WPA/WPA2 security turned on. Windows XP and some older network hardware may require a software update to support WPA/WPA2.I am having difficulty setting up WPA security on my Router.1. Log in to your Router by visiting http://router/ with your web browser. Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”.2. Click “Wireless” in the left-hand menu. Then click “Security” just below that.3. Select the “WPA/WPA2” option.4. Enter a password. This can be from 8–63 characters of your choice, including spaces and punctuation, OR a 64-digit hexadecimal number (using only the numbers 0–9 and letters A–F).5. Click “Apply Changes” to finish. Your wireless connection is now encrypted. Each computer using your wireless network will need to use the new key.Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings.Note: Some older networking hardware supports only WEP encryption. If your older computers cannot connect to your network, try 128-bit or 64-bit WEP, or seek software updates from their manufacturers.
32TROUBLESHOOTING, SUPPORT, AND WARRANTYI am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router.1. Log in to your Router. Visit http://router/ with your web browser. Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”.2. Click “Wireless” in the left-hand menu. Then click “Security” just below that.3. Select the “128-bit WEP” option.4. You may type in a WEP key manually, or generate one from a passphrase. Type a phrase in the “Passphrase” field and click the “Generate” button. A WEP key is composed of 26 hexadecimal digits (0–9, A–F.. For example, C3 03 0F AF 4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.5. Click “Apply Changes” to finish. Your wireless activity is now encrypted. Each computer using your wireless network will need to use the new key.Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings.Note: Some older networking hardware supports only 64-bit WEP encryption. If your older computers cannot connect to your network, try 64-bit WEP.
33TROUBLESHOOTING, SUPPORT, AND WARRANTYTechnical SupportUShttp://www.belkin.com/supportUKhttp://www.belkin.com/uk/supportAustraliahttp://www.belkin.com/au/support New Zealandhttp://www.belkin.com/au/supportSingapore1800 622 1130Europehttp://www.belkin.com/uk/support
34TROUBLESHOOTING, SUPPORT, AND WARRANTYBelkin International, Inc., Limited 2-Year Product WarrantyWhat this warranty covers.Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship.What the period of coverage is.Belkin warrants the Belkin product for two years.What will we do to correct problems?Product Warranty.Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use.What is not covered by this warranty?All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.
35TROUBLESHOOTING, SUPPORT, AND WARRANTYHow to get service.To get service for your Belkin product you must take the following steps:1. Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt.2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim.Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.
36TROUBLESHOOTING, SUPPORT, AND WARRANTYHow state law relates to the warranty.THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.
37REGULATORY INFORMATIONFCC StatementDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, F9K1001 v1, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation.The device shall be used in such a manner that the potential for human contact normal operation is minimizedThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Federal Communications Commission NoticeThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:• Reorientorrelocatethereceivingantenna.• Increasethedistancebetweentheequipmentandthereceiver.• Connecttheequipmenttoanoutletonacircuitdifferentfrom that to which the receiver is connected. • Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
38REGULATORY INFORMATIONCanada-Industry Canada (IC)The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.CE StatementEuropeEuropean Union Radio products with the CE or CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). • EN60950-1:2006(IEC60950-1)–ProductSafety• EN300328Technicalrequirementforradioequipment• ETS301489GeneralEMCrequirementsforradioequipment.Europe – EU Declaration of ConformityThis device complies with the essential requirements of the (R&TTE) Radio and Telecommunications Terminal Equipment Directive 1999/5/EC, (EMC) Electromagnetic compatibility Directive 2004/108/EC, and the (LVD) Low Voltage Directive 2006/95/EC. A copy of the European union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc.InformationProducts with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Product Family Standards.• EN55022(CISPR22)–ElectromagneticInterference• EN55024-1–ElectromagneticImmunity• EN61000-3-2(IEC610000-3-2)–PowerLineHarmonics• EN61000-3-3(IEC610000)–PowerLineFlicker• EN60950-1(IEC60950-1)–ProductSafetyProducts that contain the radio transmitter are sometimes labeled with the Notified Body number (CE0560) or CE alert marking if the standard used in the conformity is not harmonized across the European Community.
© 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Navigation menu