Belkin F9K1003V1 N450 Wireless N+ Router User Manual

Belkin International, Inc. N450 Wireless N+ Router

User Manual

27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok WIRELESS N+ ROUTER N450 USER MANUAL  8820-00775 F9K1003 v1 Ok mk 1/12/11   TABLE OF CONTENTS  Getting Started What’s in the Box Initial Setup Advanced Tools & Settings The Belkin Router Manager Manual Setup Using Your Browser Adding Computers to Your Network Additional Capabilities   Getting to Know Your Router Front Panel Back Panel  Technical Details Technical Features System Requirements   Using Your Router Enabling Auto Update on Your Router Updating Your Router via Your System Tray Updating the Router’s Firmware via the Web Interface Resetting the Router Restoring Your Router to Factory Defaults Restoring the Router to Default Settings Using the Web Interface   Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty  Regulatory Information FCC Statement
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok CE Statement
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Getting Started What’s in the Box N450 Wireless N+ RouterEthernetcable(attachedtorouter)Powersupply(attachedtorouter)Networkinformationcard(attachedtorouter)BelkinSetupCDwithUserManualInitial Setup WheretoPlaceYourRouterForthebestresults,placetheRouternexttoyourmodeminanopenlocationawayfromlargemetalobjectsandmagnetssuchasthosefoundinspeakers.RaisingtheRouterabovefloorlevelcanimprovethestrengthofyourwirelesssignal.HowtoSetItUp[RN150N300N450setup.ai]1) ConnectyourRouter’sEthernetcabletoyourmodem’sEthernetport(onthebackofyourmodem).Thisportmightbelabeleddifferentlyonyourparticularmodem.IfyouareaddingaRouterforthefirsttime,thisportmaybeconnectedtoyourcomputerbyanEthernetcable.ItisOKtodisconnectyourcomputerandplugtheRouterintothemodeminstead.2) PlugtheRouter’spowersupplyintoawalloutlet.3) PuttheCDintoyourcomputer.IftheCDdoesn’topenautomatically,pleasebrowsetoyourCDdriveanddoubleclickontheBelkinSetupCDicon.[SCREENSHOTOFSETUPMENUsetupmenu.png] 4) ClicktheSetupiconontheCDmenu.[SCREENSHOTOFNETWORKINFOCARDSCREENsetupnetinfocard.png]
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 5) Afterabriefinstallation,thesetupsoftwarewillaskyouforthenetworknameandpasswordfromthenetworkinformationcardthatisattachedtoyourRouter.StorethecardunderthebaseofyourRouterforfuturereference.[SCREENSHOTOFSUCCESSsetupsuccess.png] 6) Aprogressscreenwillappearwhileadditionalsoftwareisinstalled.Thismaytakeafewminutestocomplete.Oncefinished,a“Success”messagewillappearindicatingthatyouareconnectedtotheInternetviayournewBelkinRouter.Duringsetupyoumaybeaskedforadditionalinformation.YoumayneedtoenterausernameandpasswordprovidedbyyourISP.ThisusernameandpasswordislikelytobefoundonmaterialsthatcamefromyourISPwhenyousignedupforservice.Ifnecessary,youmayneedtocontactyourISPtoretrieveyourusernameandpassword.IfyouhaveastaticIPaddress,youmayneedtoenteradditionalinformationalsoprovidedbyyourISP.Ifyourcomputerdoesn’thaveawirelessadapter,orthesetupsoftwareisunabletocontrolit,youmaybeaskedtoconnectyourcomputertotheRouterwithanetworkcable.Advanced Tools & Settings [SCREENSHOTOFADVANCEDMENUsetupadvanced2.png]Aftertheinitialsetupiscomplete,youhavetheoptiontochangesettingslikeyournetworkname,securitytype,andpassword.Tomakethesechangesandothers,clickontheAdvancedToolsiconattheCDSetupmenuandselectoneofthefollowingsettingsthatyouwouldliketochange:NetworkName&SecurityPersonalizeyournetworkname(SSID),password,andstrengthofwirelesssecurity.InternetServiceProvider&LoginSettingsHaveyoumovedorchangedInternetServiceProviders?Ifyou’dliketochangethesesettingswithoutrunningthroughthesetupprocessagain,thisistheplace.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok The Belkin Router Manager [SHARESCREENSHOTOFTRAYAPPMENU(TBD)]TheBelkinRouterManagerappearsinyoursystemtray(Windows)ormenubar(Mac).ItsiconindicatesthecurrentstatusofyourRouterandalsoallowsyoutoaccessyourRouter’ssettingstomakechanges.ItalsoprovidesquickaccesstosoftwarethatcamebundledwithyourRouter.ToaccesstheRoutersettings,clickontheiconandselectfromthemenuthatappears.ThestatusofyourRouterisshownbytheBelkinRouterManagericon,whichcloselymimicsthelightonthefrontoftheRouter.Blue: You are connected to your Belkin Router and it is connected to the Internet. Amber: You are connected to your Belkin Router, but it is not connected to the Internet.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Manual Setup Using Your Browser [ZOOMEDSCREENSHOTOFADDRESSBARaddressbar.png]Inyourbrowser,type“http://router”(youdonotneedtotypeinanythingelsesuchas“www”).ThenpresstheEnterkey.Ifyou’restillhavingtroublerunningthemanualsetupoption,type“192.168.2.1”inyourbrowser(youdonotneedtotypeinanythingelsesuchas“http://”or“www”).ThenpresstheEnterkey.Adding Computers to Your Network Wirelessdevicessuchascomputers,networkprinters,andgamingsystemscanconnecttoyourRouterwithafewsimplesteps.UsingtheCD1) PuttheSetupCDintoyourcomputer.IftheCDdoesn’topenautomatically,browsetoyourCDdriveandopentheBelkinSetupCDicon.2) ClicktheSetupiconontheCDmenu.3) Afterabriefinstallation,thesetupsoftwarewillaskyouforthenetworknameandpasswordfromthenetworkinformationcardthatcamewithyourRouter.ThiscardismostlikelynowlocatedunderneaththefootofyourRouterintheprovidedcardslot.4) Aprogressscreenwillappearwhileadditionalsoftwareisinstalled.Thismaytakeafewminutestocomplete.Oncefinished,a“Success”messagewillappearindicatingthatyouareconnectedtotheInternetviayournewBelkinRouter.Note:ThesetupsoftwarerunsonlyonWindowsandMacOSXsystems.ManuallyIfyouchoosenottousetheincludedSetupCDforaddingadditionalcomputersorwirelessdevices,youcanmanuallyaddtheseitemstoyournetwork.1) Locatethewirelessnetworkconnectionsoptiononyourcomputerorwirelessdevice.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 2) SelectyourBelkinRouterfromthelistofavailablenetworks.YoucanidentifyyourBelkinRouterbylocatingthenetworkname(SSID)fromthecardlocatedunderneaththefootofyourRouter.3) Enteryournetworkpassword(locatedonyournetworkinformationcard).Yourwirelessdevicewilltakeafewmomentstoconnecttoyournetwork.Iftheconnectionisnotmadethefirsttime,trythisprocessagain.Ifyoustillhavedifficultyconnectingtoyournetworkaftertryingthisprocessafewtimes,seethe“Troubleshooting”sectioninthismanualforhelpwithconnectingtoyournetwork.Note:Insomecasesyoumaybepromptedtoselectthesecuritytype.Itisprintedonthecardforyourconvenience.UsingtheWPSButton1) StartWPSPushButtonConnection(WPSPBC)onyourcomputerorotherWiFidevicethatyouwouldliketoconnectwirelesslytoyourRouter.Oftentherewillbeabuttonforthispurposeinsoftwarethatcamewiththedevice,oraphysical“WPS,”“PBC,”or“Security”buttononthedeviceitself.2) Withintwominutes,presstheWPSbuttononyourRouterandholdfortwoseconds.TheWPSlight(smalllightaboveWPSbutton)willblinkbluewhileitlistensforyourWiFidevice.Onceaconnectionisestablished,thelightwillturnblueandthengoout.Ifaconnectionisnotestablished,thelightwillblinkamber.Youmayrepeattheprocesstotryagain.YoucanrepeatthisprocessforeachWPSenableddeviceyou’dliketoaddtoyournetwork.Additional Capabilities GuestAccess
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok YoucanallowgueststouseyourInternetconnectionwithoutjoiningyourpersonalnetwork.ThenetworknameandpasswordfortheguestnetworkislocatedonthenetworkinformationcardfoundunderthefootofyourRouter.Apersonusingyourguestnetworkwillbeabletojoinwithoutapassword,butwillbeshownaloginpagewhentheyattempttosurftheWeb.Theywillneedtoentertheguestpasswordintothispagetocontinue.   Getting to Know Your Router Front Panel [DIAGRAMfront.ai]A)RouterStatusLightYourRouter’sstatusisshownbythelightonthefront.Off:TheRouterisnotpluggedintoapowersource.BlinkingGreen:TheRouterisstartingup.SolidGreen:TheRouterisconnectedtotheInternet.BlinkingAmber:TheRoutercan’tdetectthemodem.Eitherthemodemisoff,isnotpluggedintotheRouter,orisunresponsive.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok B)Wi‐FiProtectedSetup(WPS)LightandButtonTheWPSbuttononthefrontofyourRoutercanbeusedtohelpestablishasecureconnectionbetweenyourRouterandotherWPSenabledWiFidevicessuchascomputers.TousetheWPSfeatureonyourRouter,see“GettingStarted>AddingComputerstoYourNetwork>UsingtheWPSButton”.ThesmalllightneartheWPSbuttonshowswhatishappeningwhileyouareusingWPStoestablishaconnection.Off:IdleBlinkingBlue:TheRouterislisteningforaWPSenabledcomputerorotherdevice.SolidBlue:TheRouterhasmadeasecureconnectionwiththecomputerorotherdevice.Amber:Aconnectionwasnotcreated.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Back Panel [RDIAGRAMFORN150N300N450_back.ai]A)Modem(WAN)ConnectorConnectyourmodemtothisportusinganEthernetcable.B)Wired(LAN)ConnectorsConnectcomputersandotherwirednetworkdevicestotheseportsusingEthernetcables.C)ResetButtonThisbuttonisusedtorestartyourRouterinrarecaseswhenitfunctionsincorrectly.ResettingtheRouterwillpreserveyoursettings.Thisbuttonmayalsobeusedtorestorethefactorydefaultsettings.PleaseseetheTroubleshootingsectionformoreinformation.D)PowerConnectorConnecttheincludedpowersupplytothisjack.      Technical Details  Technical Features Integrated 802.11n Wireless Access Point Utilizing MIMO (Multiple Input Multiple Output) smart-antenna technology, your Router can reach data transfer speeds of up to 300Mbps across your network.  NAT IP Address Sharing To save you the cost of adding IP addresses per computer in your house, your Belkin Router uses Network Address Translation (NAT) technology, allowing you to share a single IP address across your network.  SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses.   Web-Based Advanced User Interface
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok You can easily make changes to your Router’s advanced settings through your web browser. These changes can be made from any computer on your network.  Belkin Router Monitor The Belkin Router Monitor application helps you to monitor your Router’s status and change network settings.   Integrated 4-Port 10/100 Switch Your Router has a built-in, 4-port network switch to allow your wired computers to share: printers, data, MP3 files, digital photos, and much more.    System Requirements Router  Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Internet browser  Setup Software  A computer running Windows® XP SP2 or higher, Windows Vista®, or Windows 7; or Mac OS® X v10.x Minimum 1GHz processor and 256MB RAM 600MB of free hard-drive space for installation  Windows XP SP3 or higher or Windows Vista; or Mac OS X v10.4 or later Minimum 1GHz processor and 256MB RAM 50MB of free hard-drive space for installation    Using Your Router  Enabling Auto Update on Your Belkin Router The Router has the capability to automatically check for a newer version of firmware and alert you when it’s available. You can choose to download the new version or ignore it. By default this feature is disabled. If you want to enable it, select “Enable” and click “Apply Changes”. Note: We recommend you use a computer that has a wired connection to the Router. Setup steps: 1.  Open a web browser on the computer.  2.  In the address bar of the web browser, type “http://192.168.2.1”.  3.  Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok  4.  Click on “System Settings” in the left-hand column under the “Utilities” heading.   5.  Toward the lower-half side of the screen you will find “Auto Update Firmware Enabling”.  6.  Select “Enable” by clicking the radio button and then click “Apply Changes” at the bottom of the screen.     Updating Your Router via Your System Tray (Windows) or Menu Bar (Mac)  Once you have completed the setup process, you will need to update the new software for your Router. This can be done easily via your computer’s system tray or menu bar. Setup steps: 1.  Click on the green Belkin Router Manager icon (right-click for Windows) in your system tray (Windows) or menu bar (Mac). 2.  Select “Check for Updates” or “Update Available” from the menu. 3.  You should now see the Belkin Updater window. 4.  Click on the “Install Update” icon.       Updating the Router’s Firmware via the Web Interface
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself. Setup steps: 1.  Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.)  2.  Save the file to a location on your computer where you can get to it easily, such as your desktop.  3.  Connect the computer to one of the four LAN ports on the Router.  4.  Open a web browser on the computer.  5.  In the address bar of the web browser, type “http://192.168.2.1” and press “Enter” on your keyboard.  6.  Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 7.  Click on “Firmware Update” toward the bottom of the left-hand menu.  8.  Click the “Browse” button toward the middle of the screen to search for the file you saved previously. Note: The firmware version in the images below is depicted as an example. Your file name will vary depending on your model and version.    9.  Select the firmware file by left-clicking on it and then click the “Open” button in the lower-right corner of the window. This will take you back into the Router’s interface.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 10.  Click the “Update” button.  11.  A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”.  12.  A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the Router. Click “OK” once more.   Congratulations. The firmware has been updated successfully.    Resetting the Router  Reset Button – Red   The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password.  Resetting the Router  Push and release the “Reset” button. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the reset is complete.   Restoring Your Router to Factory Defaults  Press and hold the “Reset” button for at least 10 seconds, and then release it. The lights on the Router will momentarily flash. The “Router” light will begin to blink. When the “Router” light becomes solid again, the restore is complete.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Restoring the Router to Default Settings Using the Web Interface Symptoms You need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings.  Setup steps: 1.  Open a web browser on the computer.  2.  In the address bar of the web browser, type “http://192.168.2.1”.  3.  Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit”.   4.  Click on “Restore Factory Defaults” in the left-hand column under the “Utilities” heading.    5.  Click on the “Restore Defaults” button.    6.  A warning box will open that says, “Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK”.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok   7.  The Router will begin the restoring process. Once the restore is complete, the Router will reboot.  Note: This may take several minutes.   Your Router has successfully been restored to its factory settings.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok  Troubleshooting, Support, and Warranty Troubleshooting TheSetupCDdoesnotautomaticallystart.IfBelkinSetupdoesnotrunwhenyouinserttheCDROM,yourcomputermaynotbeconfiguredtoopenCDsautomatically.IfBelkinSetupdoesnotappearwithin15seconds,browsetoyourCDROMdriveandopenthe“BelkinSetup”icon.Alternatively,youmayvisithttp://router/andperformthesetupmanually.Pleasesee“ManualSetupUsingYourBrowser”earlierinthismanualformoreinformation.BelkinSetupcannotfindmyRouter.IfBelkinSetupisnotabletocommunicatewithyourRouterduringtheinstallationprocess,pleasecheckthefollowingitems.1) Makesurethatthewirelesshardwareonyourcomputeristurnedon,ifavailable.2) Tryconnectingyourcomputertooneofthefour“wired”portsontheRouterwithanEthernetcable.3) EnsurethattheRouterison.Thefrontpanellightshouldbeon.4) UnplugtheRouter’spowersupplyfor10seconds,thenplugitbackin.5) Theremaybefirewallsoftwareonyourcomputerpreventinganoutgoingconnection.Youmaychoosetotemporarilydisablethissoftwarebeforeattemptingsetup.IfBelkinSetupstillcannotfindtheRouter,youmightchoosetodoamanualsetup.Referto“ManuallyConfiguringNetworkSettings”inthismanualfordetails.BelkinSetupcannotconnectmyRoutertotheInternet.IfBelkinSetupisnotabletoconnecttheRoutertotheInternet,pleasecheckthefollowingitems:
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 1)  Use the troubleshooting suggestions within Belkin Setup. 2)  If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP’s domain may be at the end of the name. Example: “myname@myisp.com”. The “@myisp.com” part of the user name may need to be typed as well as your user name. 3)  If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method. BelkinSetupcompletedinstallation,butIcannotbrowsetheWeb.ThelightonthefrontofmyRouterisblinkingamber.1) MakesuretheRouterisconnectedtoyourmodemwithanEthernetcableviatheRouter’soneWAN(modem)port.2) Unplugthemodemfromitspowersourceandmakesurethatitgoesdark.Thenreapplypowertothemodem.3) UnplugyourRouter’spowersupply,wait10seconds,andplugitbackin.ThiswillcausetheRoutertotrytoreestablishcommunicationwiththemodem.BelkinSetupcompletedinstallation,butIcannotbrowsetheWeb.ThelightonthefrontofmyRouterissolidamber.1) Use the troubleshooting suggestions within Belkin Setup. 2) If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP’s domain may be at the end of the name. Example: “myname@myisp.com”. The “@myisp.com” part of the user name may need to be typed as well as your user name. 3) If you have a static connection, your ISP will have assigned you an IP address, subnet mask, and gateway address. Please re-run Belkin Setup and enter this information when a static connection is mentioned.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 4) You may need to configure your Router to meet the specific requirements of your ISP. To search our knowledge base for ISP-specific issues, go to: http://www.belkin.com/support and type in “ISP”. 5) If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method. Ican’tconnecttotheInternetwirelessly.IfthelightonthefrontoftheRouterissolidgreen,thenyourRouterisconnectedtotheInternet.YoumaynotbeconnectedtotheRouter’swirelessnetwork.Pleasereferto“AddingComputerstoYourNetwork”inthismanualforinstructions.If your Windows XP computer is running SP2, you will not be able to set up the Router via the wireless setup process. You will need to either update to Windows XP SP3 or complete the setup via a wired connection.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Ican’tconnecttotheInternetwirelesslyandmynetworknameisnotlistedinAvailableNetworks.1) VerifythatyourRouterisonandthefrontpanellightshowssolidgreen.2) IfyouarefarfromtheRouter,youmighttrymovingclosertoseeifyoumighthavebeenoutofrange.3) UsingacomputerattachedtotheRouterviaanetworkcable,visithttp://router/andensurethat“BroadcastSSID”isON.Thissettingisfoundonthe“ChannelandSSID”page.Mywirelessnetworkperformanceisslow,inconsistent,suffersfromweaksignal,orI’mhavingdifficultymaintainingaVPNconnection.Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that connection speed may decrease as you move farther away from the Router. In order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the Router if possible. Changing the wireless channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. See the section titled “Changing the Wireless Channel” for instructions on how to choose other channels. Limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open “Network Connections”, and double-click on your wireless card’s connection. In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the rate property.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment. Note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless card’s user manual. I’veinstalledthisnewRouterandsomeofmynetworkclients(computers,gameconsoles,etc.)arenowunabletoconnect.YournewRoutercamepreconfiguredwithanetworknameandpassword,foundprintedonanattachedcard.AllclientsmustusethisnetworknameandpasswordtoconnectwirelesslytoyourRouter.Youwillneedtofindthenetworksettingsonyourclient,selectthenetworknameprintedonthecardfromthelistofavailablenetworks,andenterthepasswordwhenpromptedtojointhewirelessnetwork.DoestheRoutersupportWirelessProtectedAccess(WPA)security?TheRoutershipswithWPA/WPA2securityturnedon.WindowsXPandsomeoldernetworkhardwaremayrequireasoftwareupdatetosupportWPA/WPA2.IamhavingdifficultysettingupWPAsecurityonmyRouter.1) LogintoyourRouterbyvisitinghttp://router/withyourwebbrowser.Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”. 2) Click“Wireless”inthelefthandmenu.Thenclick“Security”justbelowthat.3) Selectthe“WPA/WPA2”option.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok 4) Enterapassword.Thiscanbefrom8–63charactersofyourchoice,includingspacesandpunctuation,ORa64digithexadecimalnumber(usingonlythenumbers0–9andlettersA–F).5) Click“ApplyChanges”tofinish.Yourwirelessconnectionisnowencrypted.Eachcomputerusingyourwirelessnetworkwillneedtousethenewkey.Note:IfyouareconfiguringtheRouteroverawirelessconnection,youwillhavetoreconnecttotheRouterafterchanginganysecuritysettings.Note:SomeoldernetworkinghardwaresupportsonlyWEPencryption.Ifyouroldercomputerscannotconnecttoyournetwork,try128bitor64bitWEP,orseeksoftwareupdatesfromtheirmanufacturers.IamhavingdifficultysettingupWiredEquivalentPrivacy(WEP)securityonmyRouter.1) LogintoyourRouter.Visithttp://router/withyourwebbrowser.Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”. 2) Click“Wireless”inthelefthandmenu.Thenclick“Security”justbelowthat.3) Selectthe“128bitWEP”option.4) YoumaytypeinaWEPkeymanually,orgenerateonefromapassphrase.Typeaphraseinthe“Passphrase”fieldandclickthe“Generate”button.AWEPkeyiscomposedof26hexadecimaldigits(0–9,A–F).Forexample,C3030FAF4BB2C3D44BC3D4EE74isavalid128bitWEPkey.5) Click“ApplyChanges”tofinish.Yourwirelessactivityisnowencrypted.Eachcomputerusingyourwirelessnetworkwillneedtousethenewkey.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Note:IfyouareconfiguringtheRouteroverawirelessconnection,youwillhavetoreconnecttotheRouterafterchanginganysecuritysettings.Note:Someoldernetworkinghardwaresupportsonly64bitWEPencryption.Ifyouroldercomputerscannotconnecttoyournetwork,try64bitWEP.    Technical Support  UShttp://www.belkin.com/supportUKhttp://www.belkin.com/uk/supportAustraliahttp://www.belkin.com/au/supportNewZealandhttp://www.belkin.com/au/supportSingapore1800 622 1130 Europehttp://www.belkin.com/uk/support    Belkin International, Inc., Limited 2-Year Product Warranty  What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship.   What the period of coverage is. Belkin warrants the Belkin product for two years.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok  What will we do to correct problems?  Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use.      What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.  How to get service.    To get service for your Belkin product you must take the following steps:  1.  Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt.  2.  Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim.  Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.   How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.   Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.  IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.   This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.   *Regulatory Information  FCC Statement:  Federal Communication Commission Interference Statement  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok ●  Reorient or relocate the receiving antenna. ●  Increase the separation between the equipment and receiver. ●  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●  Consult the dealer or an experienced radio/TV technician for help.   FCC Caution: Any changes or modifications not expressly approved by the party  responsible for compliance could void the user’s authority to operate this equipment.    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.    For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.   This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.   IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok IC Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.  This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.   IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.   CE Statement  Europe European Union Radio products with the CE or CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community.  Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards).  • EN 60950-1:2006 (IEC60950-1) – Product Safety  • EN 300 328 Technical requirement for radio equipment  • ETS 301 489 General EMC requirements for radio equipment.  Europe – EU Declaration of Conformity  This device complies with the essential requirements of the (R&TTE) Radio and Telecommunications Terminal Equipment Directive 1999/5/EC, (EMC) Electromagnetic compatibility Directive 2004/108/EC, and the (LVD) Low Voltage Directive 2006/95/EC.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok A copy of the European union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc.   Information Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Product Family Standards. • EN 55022 (CISPR 22) – Electromagnetic Interference  • EN 55024-1 – Electromagnetic Immunity  • EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics  • EN 61000-3-3 (IEC610000) – Power Line Flicker  • EN 60950-1 (IEC60950-1) – Product Safety Products that contain the radio transmitter are sometimes labeled with the Notified Body number (CE0560) or CE alert marking if the standard used in the conformity is not harmonized across the European Community.
27460_8820-00775_F9K1003_N450_Wireless_N_Router_041811-ok *Back cover       © 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Navigation menu