Belkin F9K1009V1 Wireless N150 Router User Manual belkin N150 indd
Belkin International, Inc. Wireless N150 Router belkin N150 indd
Belkin >
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
User Manual Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2239550 |
| Application ID | enhg1RTCIf6ts7C4iY4+7w== |
| Document Description | User Manual Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 128.54kB (1606697 bits) |
| Date Submitted | 2014-04-11 00:00:00 |
| Date Available | 2014-04-16 00:00:00 |
| Creation Date | 2012-08-30 18:21:21 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2014-04-10 08:55:39 |
| Document Title | belkin N150.indd |
| Document Creator | Adobe InDesign CS5 (7.0.2) |
WIRELESS ROUTER N150 User Manual F9K1009v1 8820zb01125 Rev.B00 TABLE OF CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How to Set It UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Adding Computers to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Manually Set Up Your Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting to Know Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using the LAN IP Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Configuring Your Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Cloning your MAC address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Configuring Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Restarting Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Restoring Your Router to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . 24 Backing Up Your Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Restoring Previous Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Enabling Auto Firmware Update for Your Router . . . . . . . . . . . . . . . . . 29 Updating the Router’s Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Configuring Administrator Password . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Configuring Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Configuring Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Configuring UPnP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Configuring the Eco Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Configuring Self Healing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Troubleshooting, Support, and Warranty . . . . . . . . . . . . . . . . . . . . 39 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Warranty Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 GETTING STARTED What’s in the Box Initial Setup N150 Wireless Router Where to Place Your Router Ethernet cable For the best results, place the Router next to your modem in an open location away from large metal objects and magnets such as those found in speakers. Raising the Router above floor level can improve the strength of your wireless signal. Power supply Belkin CD with User Manual Quick Installation Guide Service Card GETTING STARTED How to Set It UP 3. Power up your modem by plugging in its power supply. 4. Power up your Router by plugging in its power supply. Connect Your N150 Router 1. Turn off your modem by disconnecting its power supply. 2. Connect your Router to your modem using the cable. GETTING STARTED Adding Computers to Your Network When requested, please enter the password Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps. (security key) provided on the card. Using the WPS Button Manual Setup Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “WPS” button on the device itself. If you know what sort of Internet service you have, you might try a manual setup. For this you will need a Wi-Fi-enabled smartphone, tablet, or computer. Within two minutes, press the WPS button on your Router. Wirelessly Connect to Your Router The WPS indicator will blink green while it listens for your Wi-Fi device. Once a connection is established, the light will turn green for about 5 minutes and then go out. If a connection is not established, the light will blink green for 30s. You may repeat the process to try again. The default network name and password are printed on the foot of the Router. Use your computer, tablet, or smartphone to connect to the wireless network shown on the network ID card. You can repeat this process for each WPS-enabled device you’d like to add to your network. GETTING STARTED Manually Set Up Your Internet Connection You can also try visiting http://192.168.2.1/. Use a browser to visit http://Router/. The Router homepage should appear. The status of your Internet connection is shown in the upper right corner of the Router homepage. GETTING STARTED If after a few moments it says “Connected”, you’re done! You can surf the Internet. If not, select “Connection Type” from the menu on the left. GETTING STARTED If a password screen appears, press “Submit”. Dynamic Connection Cable and fiber customers generally require a dynamic connection. Some DSL customers require a PPPoE connection. Let’s try dynamic first. Select “Dynamic” from the menu that appears and press “Next”. GETTING STARTED Enter the host name provided by your Internet service provider. Click “Apply Changes”. If after a few minutes your Internet Status says “Connected”, you’re done! You can surf the Internet. If these steps do not work, try restarting your modem and repeating the process. If not, we’ll try a PPPoE connection next. GETTING STARTED PPPoE Connection Enter the username and password supplied by your Internet provider and click “Apply Changes”. Ignore the other fields. Some DSL customers require a PPPoE connection. Select PPPoE this time and press “Next”. If after a few minutes your Internet Status says “Connected”, you’re done! You can surf the Internet. If these steps do not work, try restarting your modem and repeating the process. GETTING STARTED Connecting Additional Devices Windows® 7 iOS Your computer provides a menu of available wireless networks at the right end of the task bar. (iphone, iPad, and iPod touch) Right-click on the Open the “Settings” app and select the “Wi-Fi” menu item. Select your wireless network from the list. If asked, enter your network password (network key). Select your wireless network from the list that appears there. If asked to do so, enter the network password. icon that looks like signal strength bars. Mac OS® X Windows Vista® and Windows XP Your Mac® provides a menu of available wireless networks at the right end of the menu bar. Your device provides a menu of available wireless networks at the right end of the task bar. Click on the Right-click on the icon that shows a computer with wireless waves (XP) or two computers (Windows Vista) icon showing wireless waves. Select your wireless network from the list that appears there. If asked to do so, enter the network password. Choose “View Available Wireless Networks” (XP) or “Connect to a network” (Vista) from the menu. Select your wireless network from the list. If asked, enter your network password (network key). Android (phones and tablets) Open the “Settings” app and select “Wireless” and “Network”. From there, select “Wi-Fi” to see the list of available networks. Select your wireless network from the list. If asked to do so, enter your network password. GETTING TO KNOW YOUR ROUTER Successful Connection: The WPS light is SOLID GREEN for 5 minutes and then goes out when the Router has made a secure connection with the computer or other device. Front Panel Failed Connection: The WPS light is BLINKING GREEN for 30s after the WPS connection fails. WAN Light Your Router’s status is shown by the lights on the front panel. Off: WAN connection is not created. Power Light Blinking Green: Data is being transmitted on the WAN port. Off: The Router is not plugged into a power source. Solid Green: The Router is connected to the Internet. Solid Green: Power is supplied to the Router. LAN Light WLAN Light Off: LAN connection is not created. Off: WLAN is disabled. Blinking Green: Data is being transmitted on the LAN port. Blinking Green: Wireless data is being transmitted in the WLAN. Solid Green: The Router is connected to devices through Ethernet cables. Solid Green: WLAN is enabled but no data transfer. Wi-Fi Protected Setup (WPS) Light Off: Idle Blinking Green: The Router is listening for a WPSenabled computer or other device. 10 GETTING TO KNOW YOUR ROUTER Back Panel WPS Button The WPS button on the back of your Router can be used to help establish a secure connection between your Router and other WPSenabled Wi-Fi devices such as computers. To use the WPS feature on your Router, see “Getting Started > Adding Computers to Your Network > Using the WPS Button”. Reset Button This button is used to restore the factory default settings. To reset the Router, press and hold this button for 8-10 seconds. Power Connector Connect the included power supply to this jack. Modem (WAN) Connector Connect your modem to this port using an Ethernet cable. Wired (LAN) Connectors Connect computers and other wired network device to these ports using Ethernet cables. 11 TECHNICAL DETAILS Technical Features You can easily make changes to your Route’s advanced settings through your web browser. These changes can be made from any computer on your network. Integrated 802.11n Wireless Access point Integrated 4-Port 10/100 Switch The N150 technology enhances your Router’s wireless capabilities, allowing for data transfer speeds of up to 150Mbps across your network. Your Router has a built-in, 4-port network switch to allow your wired computers to share: printers, data, MP3 files, digital photos, and much more. NAT IP Address Sharing System Requirements To save you the cost of adding IP address per computer in your house, our Belkin Router uses Network Address Translation (NAT) technology, allowing you to share a single IP address across your network. Router Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection SPI Firewall At least one computer with an installed network interface adapter Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses. TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Universal Plug-and-Play (UPnP) Compatibility Internet browser The UPnP (Universal Plug-and-Play) feature in your Router offers seamless operation of voice and video messaging, game, and other applications that are UPnP-compliant. Web-Based Advanced User Interface 12 USING YOUR ROUTER Using the LAN IP Setup Setup steps: The “LAN Settings” page allows changing the Router’s LAN IP address as required and configuring Dynamic Host Configuration Protocol (DHCP). Open a Web browser on the computer. In the address bar of the Web browser, type http://192.168.2.1. Configuring Parameters of LAN IP Setup LAN IP setup parameters are advanced settings that you may require if you are a network administrator or your network requires a different IP addressing scheme. The Router is shipped with the default IP address on the LAN side and with the DHCP server enabled. Click “Login” in the upper right corner of the page. The Router does not ship with a password, so just click “Submit”. Note: If you change the default LAN IP address, you must use the new LAN IP address to log in. Click on “LAN Settings” in the left column under the “LAN Setup” heading. 13 USING YOUR ROUTER Configure the IP address and subnet mask. Click “Login” in the upper right corner of the page. The Router does not ship with a password, so just click “Submit”. IP Address: The IP address that a LAN user uses to access the Router. The default IP is 192.168.2.1. IP Subnet Mask: Subnet mask of the LAN port. You can enter a different subnet mask according to the actual network status. Click “Apply”. Click on “LAN Settings” in the left column under the “LAN Setup” heading. Using the Router as a DHCP Server By default, the Router acts as a DHCP server, automatically assigning IP addresses to comupters in the LAN. Users do not need to configure TCP/IP protocol paramters such as the IP address, the subnet mask, the gateway, and the DNS server information for computers connected to the Router’s LAN. Setup steps: Open a Web browser on the computer. Select the “On” button to use the Router as a DHCP server. In the address bar of the Web browser, type http://192.168.2.1. Configure the parameters below. IP Pool Starting Address/IP Pool Ending Address: Set the starting and ending IP addresses to specify a pool of IP addresses to be assigned by the DHCP server. After you set “Starting IP Address/Ending IP Address”, hosts in the LAN obtain IP addresses that are in the range of the starting and ending IP addresses. 14 USING YOUR ROUTER Lease Time: The valid time for an IP address that is automatically assigned to a device by the DHCP server to a host. The DHCP server does not assign the IP address to other hosts within the specified time. If selecting “Forever”, you save devices in the LAN with fixed addresses. Setup steps: Click “Connection Type” in the left column under the “Internet WAN” heading. Configuring the Local Domain Name The local domain name is a user-friendly name for your Router. At the bottom of the “LAN Settings” page, you can set a local domain name. The default name is Belkin. There is no need to change this setting unless required. Configuring Your Internet Connection Settings related to your Internet service are specified in the “Connection Type” page under the “Internet WAN” heading. Select a WAN connection type. Contact your ISP if you do not know your WAN connection mode. Dynamic Connection Cable and fiber customers generally require a dynamic connection. 15 USING YOUR ROUTER Select “Dynamic” in the “Connection Type” page that appears. Click “Next”. Enter the host name provided by your Internet provider. Click “Apply Changes”. 16 USING YOUR ROUTER If after a few minutes your Internet Status says “Connected”, you’re done! You can surf the Internet. Configure the parameters below. These parameters cannot be left blank. Static Connection IP Address: Enter the WAN IP address provided by the ISP. The parameter must be entered. Select Static IP if your ISP provides the IP address, subnet mask, and information about the gateway and DNS server. Subnet Mask: Enter the WAN subnet mask provided by the ISP. It varies with the network type. It is usually 255.255.255.0 (Class C). Setup steps: ISP Gateway Address: Enter the IP address of the gateway provided by the ISP. It is the IP address used for connecting to the ISP. Click “Connection Type” in the left column under the “Internet WAN” heading. Select “Static” in the “Connection Type” page that appears. 17 USING YOUR ROUTER Click “Click here to enter your DNS Settings” to configure DNS information. Clear the “Automatic from ISP” check box. In the “DNS Address” and “Secondary DNS Address” fields, enter the IP addresses of the primary DNS server and the secondary server (if available). At least enter one DNS server IP address. Click “Apply Changes”. If after a few minutes your Internet Status says “Connected”, you’re done! You can surf the Internet. PPPoE Connection Most DSL providers use PPPoE (Point-to-Point Protocol over Ethernet) as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service. Setup steps: Click “Connection Type” in the left column under the “Internet WAN” heading. Select “PPPoE” in the “Connection Type” page that appears. 18 USING YOUR ROUTER Configure the parameters below. PPTP/L2TP Connection User Name and Password: Enter the user name and password provided by the ISP. The user name and password are used to log in to the ISP server. Some ISPs require a connection using the PPTP or L2TP protocol. Enter the account and password provided by your ISP. The following takes PPTP connection as an example. Retype Password: Enter the password again. Service Name: If several PPPoE servers are available, specify which server to use. Setup steps: Click “Connection Type” in the left column under the “Internet WAN” heading. IP assigned by ISP: You can select either to an IP address assigned by your ISP, or to manually set an IP address in the “IP Address” field. Select “PPTP” in the “Connection Type” page that appears. MTU: The maximum transmission unit. We strongly recommend you to use the default setting unless your ISP gives you a specific MTU setting. If you select the “Disconnect after xxx minutes of no activity” check box and specify a time interval, the system interrupts the Internet connection when there is no Internet access behavior within the specified time. Click “Apply Changes”. If after a few minutes your Internet Status says “Connected”, you’re done! You can surf the Internet. 19 USING YOUR ROUTER Configure the parameters below. If you select the “Disconnect after xxx minutes of no activity” check box and specify a time interval, the system interrupts the Internet connection when there is no Internet access behavior within the specified time. PPTP Account and PPTP Password: Enter the PPTP account and password provided by the ISP. The PPTP account and password are used to log in to the ISP server. Retype Password: Enter the password again. Host Name: (Optional) Enter the host name. Service Address: Enter the IP address of the ISP server. IP Address Assignment: You can select either to dynamically get an IP address from the ISP or to use a static IP address. If you select “Use Static IP Address”, manually enter the IP address, the subnet mask, and the default gateway. 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2012:08:30 18:21:21+08:00 Creator : Adobe InDesign CS5 (7.0.2) Modify Date : 2014:04:10 08:55:39+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:435f3ef3-2225-4c27-8138-d750368c6fc8 Document ID : xmp.did:CE805D52BBAEE1118986DDF3857B1A1B Original Document ID : adobe:docid:indd:ca38b97f-df45-11de-b1f2-eb94035ac173 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:CD805D52BBAEE1118986DDF3857B1A1B Derived From Document ID : xmp.did:DC34346F8E216811822ABB2C189D8D26 Derived From Original Document ID: adobe:docid:indd:ca38b97f-df45-11de-b1f2-eb94035ac173 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:EA20437E08206811808396F480D09AB2, xmp.iid:EB20437E08206811808396F480D09AB2, xmp.iid:502CB4C30E206811808396F480D09AB2, xmp.iid:FFF490EB0C2068118083803463E82CA3, xmp.iid:736F568F0F2068118083FBFBC3DF072E, xmp.iid:48849546192068118083FBFBC3DF072E, xmp.iid:5E403ED8192068118083FBFBC3DF072E, xmp.iid:6A24A52C1A2068118083FBFBC3DF072E, xmp.iid:6B24A52C1A2068118083FBFBC3DF072E, xmp.iid:2CC71C74072068118083C61573733841, xmp.iid:1B7B5779072068118A6D9FFB83E11F9A, xmp.iid:0C699090082068118083BB29E606109A, xmp.iid:DD1D9CD7FA2068118083BB29E606109A, xmp.iid:95AA1A7407206811822ABB2C189D8D26, xmp.iid:D9EB0F6C9F206811822ABB2C189D8D26, xmp.iid:1B3B50DCA7206811822ABB2C189D8D26, xmp.iid:314928B783216811822ABB2C189D8D26, xmp.iid:57B2962684216811822ABB2C189D8D26, xmp.iid:3B9CCC6A8E216811822ABB2C189D8D26, xmp.iid:DC34346F8E216811822ABB2C189D8D26, xmp.iid:CD805D52BBAEE1118986DDF3857B1A1B, xmp.iid:CE805D52BBAEE1118986DDF3857B1A1B, xmp.iid:EB5BB361BFAEE1118986DDF3857B1A1B, xmp.iid:71B92B4EC1AEE1118986DDF3857B1A1B, xmp.iid:1D512880C2AEE1118986DDF3857B1A1B, xmp.iid:26607815C5AEE1118986DDF3857B1A1B, xmp.iid:59E392B7D6AEE1118986DDF3857B1A1B, xmp.iid:221518F3D7AEE1118986DDF3857B1A1B, xmp.iid:07EDDE9DD9AEE1118986DDF3857B1A1B, xmp.iid:9B4A0CAADAAEE1118986DDF3857B1A1B, xmp.iid:8B2D3620DCAEE1118986DDF3857B1A1B, xmp.iid:CBC87496DCAEE1118986DDF3857B1A1B, xmp.iid:68C5CAE6DCAEE1118986DDF3857B1A1B, xmp.iid:04640C03DDAEE1118986DDF3857B1A1B, xmp.iid:89C4F039DDAEE1118986DDF3857B1A1B, xmp.iid:B4641033DEAEE1118986DDF3857B1A1B, xmp.iid:83406CE6DEAEE1118986DDF3857B1A1B, xmp.iid:3B74E91FDFAEE1118986DDF3857B1A1B, xmp.iid:61678252DFAEE1118986DDF3857B1A1B, xmp.iid:2FCD9F69DFAEE1118986DDF3857B1A1B, xmp.iid:5789658ADFAEE1118986DDF3857B1A1B, xmp.iid:13C7F1A5DFAEE1118986DDF3857B1A1B, xmp.iid:74138BCDDFAEE1118986DDF3857B1A1B, xmp.iid:14AAF5E3DFAEE1118986DDF3857B1A1B, xmp.iid:CBAEABF3DFAEE1118986DDF3857B1A1B, xmp.iid:FCAAB6FCDFAEE1118986DDF3857B1A1B, xmp.iid:F1BA5E01E0AEE1118986DDF3857B1A1B, xmp.iid:23D16467E0AEE1118986DDF3857B1A1B, xmp.iid:B95203B1E0AEE1118986DDF3857B1A1B, xmp.iid:7B8A8D02E2AEE1118986DDF3857B1A1B, xmp.iid:DF4A3EBFE2AEE1118986DDF3857B1A1B, xmp.iid:93DE823FE5AEE1118986DDF3857B1A1B, xmp.iid:A15E9FB9E6AEE1118986DDF3857B1A1B, xmp.iid:AB00A252E8AEE1118986DDF3857B1A1B, xmp.iid:23480F6AE9AEE1118986DDF3857B1A1B, xmp.iid:55350BD6E9AEE1118986DDF3857B1A1B, xmp.iid:42A5F110EDAEE1118986DDF3857B1A1B, xmp.iid:A1C8803EEDAEE1118986DDF3857B1A1B, xmp.iid:A10035D2EDAEE1118986DDF3857B1A1B, xmp.iid:57FE54F5EEAEE1118986DDF3857B1A1B, xmp.iid:58FE54F5EEAEE1118986DDF3857B1A1B, xmp.iid:28E6F0ABF0AEE111BB80A792ACBE373D, xmp.iid:509376D9F0AEE111BB80A792ACBE373D, xmp.iid:87568E2F7AAFE1118823D796C747B282, xmp.iid:D55225027BAFE1118823D796C747B282, xmp.iid:2E1D1D357BAFE1118823D796C747B282, xmp.iid:6D191DA44FB0E1119FAA9F353F3EC113, xmp.iid:C7C9A3EF4FB0E1119FAA9F353F3EC113, xmp.iid:B14DED1867B4E111B63EFC108A9C13DA, xmp.iid:F99C1FDF67B4E111B63EFC108A9C13DA, xmp.iid:63B8853C69B4E111B63EFC108A9C13DA, xmp.iid:3BBA40ADB0BAE11183C7D31B605074E6, xmp.iid:A6170AC96FBBE111BE65ABA3EB5E8C0E, xmp.iid:4189B88370BBE111BE65ABA3EB5E8C0E, xmp.iid:4289B88370BBE111BE65ABA3EB5E8C0E, xmp.iid:972E011978BBE111A5E9A425BE36013E, xmp.iid:3DEE7E0879BBE111A5E9A425BE36013E, xmp.iid:5F7C75BFEBC4E111B333CA56352DDDBF, xmp.iid:FFDD7BE5EBC4E111B333CA56352DDDBF, xmp.iid:2D9A301770C6E1119887F026F6FB841B, xmp.iid:826CBC3070C6E1119887F026F6FB841B, xmp.iid:37D24306E4EFE1118C82AF7685CA331A, xmp.iid:AF59695FE7EFE1118C82AF7685CA331A, xmp.iid:6ABB6F56E8EFE1118C82AF7685CA331A, xmp.iid:2431E396B1F0E111A720D8010CE354A3, xmp.iid:F5183A618CF2E111929BD5A534725202 History When : 2011:10:10 11:13:13-07:00, 2011:10:10 11:13:13-07:00, 2011:10:10 12:04:48-07:00, 2011:10:10 13:12:33-07:00, 2011:10:11 10:26:25-07:00, 2011:10:11 11:35:58-07:00, 2011:10:11 11:40:02-07:00, 2011:10:11 11:42:24-07:00, 2011:10:11 11:43:13-07:00, 2011:10:11 11:44:08-07:00, 2011:10:11 11:48:46-07:00, 2011:10:11 12:03:23-07:00, 2011:10:12 16:57:46-07:00, 2011:10:12 17:11:53-07:00, 2011:10:13 11:19:50-07:00, 2011:10:13 12:20:15-07:00, 2011:10:14 14:34:08-07:00, 2011:10:14 14:37:15-07:00, 2011:10:14 15:50:52-07:00, 2011:10:14 15:50:52-07:00, 2012:06:05 11:05:36+08:00, 2012:06:05 11:05:36+08:00, 2012:06:05 11:34:39+08:00, 2012:06:05 11:48:26+08:00, 2012:06:05 11:56:59+08:00, 2012:06:05 12:15:28+08:00, 2012:06:05 14:21:42+08:00, 2012:06:05 14:30:31+08:00, 2012:06:05 14:42:27+08:00, 2012:06:05 14:49:57+08:00, 2012:06:05 15:00:25+08:00, 2012:06:05 15:03:43+08:00, 2012:06:05 15:05:58+08:00, 2012:06:05 15:06:46+08:00, 2012:06:05 15:08:18+08:00, 2012:06:05 15:15:16+08:00, 2012:06:05 15:20:16+08:00, 2012:06:05 15:21:53+08:00, 2012:06:05 15:23:18+08:00, 2012:06:05 15:23:57+08:00, 2012:06:05 15:24:52+08:00, 2012:06:05 15:25:38+08:00, 2012:06:05 15:26:44+08:00, 2012:06:05 15:27:22+08:00, 2012:06:05 15:27:48+08:00, 2012:06:05 15:28:03+08:00, 2012:06:05 15:28:11+08:00, 2012:06:05 15:31:02+08:00, 2012:06:05 15:33:06+08:00, 2012:06:05 15:42:32+08:00, 2012:06:05 15:47:49+08:00, 2012:06:05 16:05:43+08:00, 2012:06:05 16:16:17+08:00, 2012:06:05 16:27:43+08:00, 2012:06:05 16:35:32+08:00, 2012:06:05 16:38:33+08:00, 2012:06:05 17:01:41+08:00, 2012:06:05 17:02:57+08:00, 2012:06:05 17:07:05+08:00, 2012:06:05 17:15:13+08:00, 2012:06:05 17:19:03+08:00, 2012:06:05 17:27:29+08:00, 2012:06:05 17:28:46+08:00, 2012:06:06 09:51:51+08:00, 2012:06:06 09:57:44+08:00, 2012:06:06 09:59:10+08:00, 2012:06:07 11:19:50+08:00, 2012:06:07 11:21:56+08:00, 2012:06:12 16:17:49+08:00, 2012:06:12 16:23:21+08:00, 2012:06:12 16:33:07+08:00, 2012:06:20 16:19:38+08:00, 2012:06:21 15:07:38+08:00, 2012:06:21 15:12:51+08:00, 2012:06:21 15:16+08:00, 2012:06:21 16:07:08+08:00, 2012:06:21 16:13:50+08:00, 2012:07:03 16:47:40+08:00, 2012:07:03 16:48:44+08:00, 2012:07:05 15:07:32+08:00, 2012:07:05 15:08:15+08:00, 2012:08:27 09:10:43+08:00, 2012:08:27 09:34:41+08:00, 2012:08:27 09:41:35+08:00, 2012:08:28 09:42:12+08:00, 2012:08:30 18:20:53+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2014:04:10 08:55:39+08:00 Creator Tool : Adobe InDesign CS5 (7.0.2) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 6077 bytes, use -b option to extract), (Binary data 8493 bytes, use -b option to extract) Doc Change Count : 4253 Format : application/pdf Title : belkin N150.indd Producer : Adobe PDF Library 9.9 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 22EXIF Metadata provided by EXIF.tools