Belkin G3A2000 HD Bluetooth Music Receiver User Manual
Belkin International, Inc. HD Bluetooth Music Receiver
Belkin >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1809788 |
| Application ID | TtDJG5LBYnxQeS2HO+bsjw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.18kB (339799 bits) |
| Date Submitted | 2012-10-08 00:00:00 |
| Date Available | 2012-10-15 00:00:00 |
| Creation Date | 2012-08-30 16:20:47 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2012-10-04 18:29:40 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS5 (7.0.4) |
FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, G3A2000, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IMPORTANT NOTE: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE: IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instructions as documented in this manual. IC Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B conforme a la norme NMB-003 du Canada Industry Canada statement: This device complies with RSS standards of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme a la norme CNR- standards d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Belkin International, Inc., Limited 2-Year Product Warranty What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin warrants the Belkin product for two years. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use. What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. Technical Support US http://www.belkin.com/support UK http://www.belkin.com/uk/support Australia http://www.belkin.com/au/support New Zealand http://www.belkin.com/au/support Singapore 1800 622 1130 Europe http://www.belkin.com/uk/support GPL License The source code files for all Belkin products using GPL based code are available on this webpage: http://www.belkin.com/support/opensource/ Select your Belkin product model and a firmware version from the list below to download the source code library. The source code found here is complete to the best of Belkin’s knowledge. If you believe any additional source code files should be provided under the applicable open source license, please contact Belkin and provide in detail the product or code module in question. Belkin is committed to meeting the requirements of the open source licenses including the GNU General Public License (GPL) and will make all required source code available. For more information on the GPL license, please go to http://www.gnu.org/licenses/licenses.html. Table of Contents * GNU GENERAL PUBLIC LICENSE * Preamble * TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION, AND MODIFICATION GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. How to get service To get service for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., at http://www.belkin.com/Support within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. 1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an PR# 34759 File name INS_G3A2000_8820-01246_RevA00_legal_statement SKU# G3A2000 P#/MKTG# 8820-01246 Rev. A00 DESIGNER(S) Richard/Jack Date 8/30/12 VERSION 01 announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: If the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. Y ou are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. E ach time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. © 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. 8820-01246 Rev. A00 G3A2000
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : 3.1-701 Create Date : 2012:08:30 16:20:47-07:00 Metadata Date : 2012:10:04 18:29:40+08:00 Modify Date : 2012:10:04 18:29:40+08:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Page Image Page Number : 1 Page Image Format : JPEG Page Image Width : 1024 Page Image Height : 1024 Page Image : (Binary data 137632 bytes, use -b option to extract) Instance ID : uuid:af0f471b-7f60-4435-aac2-f014fd3a06d5 Document ID : xmp.did:4E3CD16C082068118A6D83FD0AD91E30 Original Document ID : xmp.did:4E3CD16C082068118A6D83FD0AD91E30 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:4E3CD16C082068118A6D83FD0AD91E30, xmp.iid:503CD16C082068118A6D83FD0AD91E30, xmp.iid:513CD16C082068118A6D83FD0AD91E30, xmp.iid:563CD16C082068118A6D83FD0AD91E30, xmp.iid:46D7F9301F2068118A6D83FD0AD91E30, xmp.iid:49D7F9301F2068118A6D83FD0AD91E30, xmp.iid:4CD7F9301F2068118A6D83FD0AD91E30, xmp.iid:4FD7F9301F2068118A6D83FD0AD91E30, xmp.iid:7D5FFC5E212068118A6D83FD0AD91E30, xmp.iid:805FFC5E212068118A6D83FD0AD91E30, xmp.iid:815FFC5E212068118A6D83FD0AD91E30, xmp.iid:845FFC5E212068118A6D83FD0AD91E30, xmp.iid:855FFC5E212068118A6D83FD0AD91E30, xmp.iid:AB0F3195232068118A6D83FD0AD91E30, xmp.iid:AE0F3195232068118A6D83FD0AD91E30, xmp.iid:B10F3195232068118A6D83FD0AD91E30, xmp.iid:B40F3195232068118A6D83FD0AD91E30, xmp.iid:507586E6272068118A6D83FD0AD91E30, xmp.iid:537586E6272068118A6D83FD0AD91E30, xmp.iid:023D6D23292068118A6D83FD0AD91E30, xmp.iid:053D6D23292068118A6D83FD0AD91E30, xmp.iid:063D6D23292068118A6D83FD0AD91E30, xmp.iid:073D6D23292068118A6D83FD0AD91E30, xmp.iid:083D6D23292068118A6D83FD0AD91E30, xmp.iid:0B3D6D23292068118A6D83FD0AD91E30, xmp.iid:0C3D6D23292068118A6D83FD0AD91E30, xmp.iid:4AE4F19F2E2068118A6D83FD0AD91E30, xmp.iid:4DE4F19F2E2068118A6D83FD0AD91E30, xmp.iid:4EE4F19F2E2068118A6D83FD0AD91E30, xmp.iid:51E4F19F2E2068118A6D83FD0AD91E30, xmp.iid:54E4F19F2E2068118A6D83FD0AD91E30, xmp.iid:6A873207342068118A6D83FD0AD91E30, xmp.iid:6D873207342068118A6D83FD0AD91E30, xmp.iid:70873207342068118A6D83FD0AD91E30, xmp.iid:AC40670B352068118A6D83FD0AD91E30, xmp.iid:AF40670B352068118A6D83FD0AD91E30, xmp.iid:B040670B352068118A6D83FD0AD91E30, xmp.iid:B340670B352068118A6D83FD0AD91E30, xmp.iid:A48158A4352068118A6D83FD0AD91E30, xmp.iid:A88158A4352068118A6D83FD0AD91E30, xmp.iid:AC8158A4352068118A6D83FD0AD91E30, xmp.iid:AD8158A4352068118A6D83FD0AD91E30, xmp.iid:AE8158A4352068118A6D83FD0AD91E30, xmp.iid:E6A20D4A362068118A6D83FD0AD91E30, xmp.iid:E7A20D4A362068118A6D83FD0AD91E30, xmp.iid:FA7F1174072068118A6D8EDAB67105D2, xmp.iid:FE7F1174072068118A6D8EDAB67105D2, xmp.iid:6A97FCC3472068118C14CAC2EB8E624C, xmp.iid:6E97FCC3472068118C14CAC2EB8E624C, xmp.iid:7297FCC3472068118C14CAC2EB8E624C, xmp.iid:3C68DAFA472068118C14CAC2EB8E624C, xmp.iid:3D68DAFA472068118C14CAC2EB8E624C, xmp.iid:4068DAFA472068118C14CAC2EB8E624C, xmp.iid:5F5B482D492068118C14CAC2EB8E624C, xmp.iid:605B482D492068118C14CAC2EB8E624C, xmp.iid:615B482D492068118C14CAC2EB8E624C, xmp.iid:2C954403172068118A6DD39AA860778B, xmp.iid:2F954403172068118A6DD39AA860778B, xmp.iid:32954403172068118A6DD39AA860778B, xmp.iid:7E5508E0202068118A6DD39AA860778B, xmp.iid:7F5508E0202068118A6DD39AA860778B, xmp.iid:805508E0202068118A6DD39AA860778B, xmp.iid:835508E0202068118A6DD39AA860778B, xmp.iid:865508E0202068118A6DD39AA860778B, xmp.iid:24269D2F2E2068118A6DE6D8FE111FB3, xmp.iid:27269D2F2E2068118A6DE6D8FE111FB3, xmp.iid:4547860B312068118A6DE6D8FE111FB3, xmp.iid:4647860B312068118A6DE6D8FE111FB3, xmp.iid:4747860B312068118A6DE6D8FE111FB3, xmp.iid:97ADC523322068118083A6D88BCB719E, xmp.iid:9AADC523322068118083A6D88BCB719E, xmp.iid:03801174072068118083C4B5BA7BA879, xmp.iid:06801174072068118083C4B5BA7BA879, xmp.iid:03801174072068118083FADE8D8AA67D, xmp.iid:ED03F39B212068118083FADE8D8AA67D, xmp.iid:F003F39B212068118083FADE8D8AA67D, xmp.iid:0AF766D2292068118083FADE8D8AA67D, xmp.iid:0DF766D2292068118083FADE8D8AA67D History When : 2012:04:12 12:00:50-07:00, 2012:04:12 12:04-07:00, 2012:04:12 12:04-07:00, 2012:04:12 14:41:20-07:00, 2012:04:12 14:43:48-07:00, 2012:04:12 14:44:36-07:00, 2012:04:12 14:51:05-07:00, 2012:04:12 14:55:34-07:00, 2012:04:12 14:59:24-07:00, 2012:04:12 15:00:40-07:00, 2012:04:12 15:06:36-07:00, 2012:04:12 15:07:52-07:00, 2012:04:12 15:14:35-07:00, 2012:04:12 15:15:14-07:00, 2012:04:12 15:24-07:00, 2012:04:12 15:26:43-07:00, 2012:04:12 15:44:43-07:00, 2012:04:12 15:46:09-07:00, 2012:04:12 15:46:39-07:00, 2012:04:12 15:55:01-07:00, 2012:04:12 15:57:58-07:00, 2012:04:12 15:58:38-07:00, 2012:04:12 15:59:46-07:00, 2012:04:12 16:01:35-07:00, 2012:04:12 16:03:46-07:00, 2012:04:12 16:04:42-07:00, 2012:04:12 16:34:17-07:00, 2012:04:12 16:36:02-07:00, 2012:04:12 16:40:58-07:00, 2012:04:12 16:52:29-07:00, 2012:04:12 16:59:40-07:00, 2012:04:12 17:12:58-07:00, 2012:04:12 17:15:58-07:00, 2012:04:12 17:17:11-07:00, 2012:04:12 17:20:15-07:00, 2012:04:12 17:20:36-07:00, 2012:04:12 17:21:16-07:00, 2012:04:12 17:21:49-07:00, 2012:04:12 17:24:31-07:00, 2012:04:12 17:25:20-07:00, 2012:04:12 17:25:52-07:00, 2012:04:12 17:27:08-07:00, 2012:04:12 17:27:43-07:00, 2012:04:12 17:29:09-07:00, 2012:04:12 17:30:18-07:00, 2012:04:13 10:00:41-07:00, 2012:04:13 10:01:01-07:00, 2012:04:16 17:31:27-07:00, 2012:04:16 17:32:04-07:00, 2012:04:16 17:32:18-07:00, 2012:04:16 17:32:59-07:00, 2012:04:16 17:33:47-07:00, 2012:04:16 17:33:58-07:00, 2012:04:16 17:43:01-07:00, 2012:04:16 17:43:22-07:00, 2012:04:16 17:44:51-07:00, 2012:04:19 16:58:44-07:00, 2012:04:19 17:02:38-07:00, 2012:04:19 17:03:20-07:00, 2012:04:19 17:04:31-07:00, 2012:04:19 17:08:06-07:00, 2012:04:19 17:09:19-07:00, 2012:04:19 17:10:25-07:00, 2012:04:19 17:10:49-07:00, 2012:04:23 14:56:45-07:00, 2012:04:23 14:58:14-07:00, 2012:04:23 15:00:42-07:00, 2012:04:23 15:01:34-07:00, 2012:04:23 15:03:34-07:00, 2012:08:28 16:32:32-07:00, 2012:08:28 16:41:59-07:00, 2012:08:28 16:58:11-07:00, 2012:08:28 17:02:38-07:00, 2012:08:30 11:43:15-07:00, 2012:08:30 15:47:30-07:00, 2012:08:30 15:47:33-07:00, 2012:08:30 15:49:16-07:00, 2012:08:30 16:20:38-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 937 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 1 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools