Bellwave BPP-UP100 Dual-Band GSM Mobile Phone User Manual UP100

Download:
Mirror Download [FCC.gov]
Document ID	587898
Application ID	2J1FuslUyR3y48KdvCqTfw==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.74kB (121798 bits)
Date Submitted	2005-10-03 00:00:00
Date Available	2005-09-30 00:00:00
Creation Date	2005-09-29 11:00:05
Producing Software	Acrobat PDFWriter 5.0 Windows NT¿ë
Document Lastmod	0000-00-00 00:00:00
Document Title	UP100 인증용매뉴얼.doc
Document Creator	UP100 인증용매뉴얼 - Microsoft Word
Document Author:	wooyoung

GSM Phone
USER’S MANUAL
MODEL : BPP-UP100
Please read this manual carefully before
operating your handset.
Retain it for future reference
Draft Version (09/28/2005)
FCC RF EXPOSURE
INFORMATION
Vehicle Mounted External
In August 1996 the Federal Communications commission
A minimum separation distance of 7.9 inches (20cm)
(FCC) of the United States with its action in Report and
must be maintained between a person and the vehicle
Order FCC 96-326 adopted an updated safety standard
mounted external antenna to satisfy FCC RF exposure
for human exposure to radio frequency electromagnetic
requirements.
energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard
previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC
guidelines and these international standards.
Use only the supplied or an approved antenna.
Unauthorized antennas, modifications, or attachments
could impair call quality, damage the phone, or result in
violation of FCC regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin, a
minor burn may result. Please contact your local dealer
for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations
using the optional belt-clip/holster placed 0.7 inches
(1.8cm) from the body. To comply with FCC RF exposure
requirements, a minimum separation distance of 0.7
inches (1.8cm) must be maintained between the user’s
body and the phone, including the antenna, whether
extended or retracted. The use of third-party belt-clips/
holsters with no metallic components that provide the
minimum separation distance of 0.7 inches (1.8cm) can
be used to satisfy FCC RF exposure requirements. The
use of non-tested accessories or other body-worn
operations
may not comply with FCC RF exposure requirements and
should be avoided. Contact your local dealer for optional
accessory items.
Antenna (optional, if available.)
Table of Contents
Incoming Call ............................................
Safety precautions ......................................
Call Timer ..................................................
Unpacking...................................................
Messages .................................................
Your Phone .............................................
Write Messages ..........................................
Part of Your Phone ....................................
Out Message ..............................................
Display .....................................................
In Message ................................................
Backlight ..................................................
Status Report ............................................
Call Indicator LED .....................................
Call Voicemail ............................................
Getting Started ........................................
Call Broadcast ...........................................
Installing a SIM Card ..................................
Memory Status ..........................................
Charging a Battery ....................................
Setting .....................................................
Switching the Phone On/Off ........................
Entering Text ..........................................
Your Phone’s Mode .....................................
Changing Text Input Mode ...........................
Call Functions ..........................................
Ezi Pinyin Mode ..........................................
Making a Call .............................................
Ezi Stroke Mode .........................................
Making International Calls ...........................
Ezi English Mode ........................................
Making a Call from the Phonebook ...............
Letter Mode ...............................................
Redialing the Last Number ..........................
Number Mode ............................................
Adjusting the Volume...................................
Symbol Mode .............................................
Answering a Call ........................................
Settings ...................................................
Viewing Missed Calls ...................................
PIN ..........................................................
Quick-switching to Vibration Mode ................
Private Password ........................................
In-Call Options ..........................................
Using the Menus ......................................
Net Service ..............................................
Accessing a Menu Functions by Scrolling .......
Call Divert .................................................
List of Menu Functions ................................
Call Barring ...............................................
Reference Information ..........................
Call Waiting ...............................................
Access Codes ...........................................
Send My Caller ID ......................................
Using the Batteries ...................................
Network Selection ......................................
Safety Information ...................................
Phonebook ..............................................
Care and Maintenance ...............................
Storing a Phone Number with a Name ..........
Glossary ................................................
Speed-Dialing from Phonebook ....................
Using Phonebook Options ...........................
Recent Call ..............................................
Outgoing Call .............................................
Missed Call ................................................
Safety
is switched on.
Precautions
Ensure the phone is switched on and in service.
Read these simple guidelines. Failure to comply
official emergency number) and press the
with them may be dangerous or illegal. For more
key. Give your location. Do not end the call until
detailed safety information, see “Safety
told to do so.
Information”
Non-Ionizing Radiation
Road safety comes first
No part of the human body is allowed to come
Do not use a hand-held phone while driving; park
too close to the antenna during operation of the
the vehicle first. Remember that in some
equipment.
countries, it is illegal to use a hand-held phone
IMPORTANT! Use only approved accessories
while driving.
and batteries.
Switch off when refueling
The use of any other power accessory will
Do not use the phone at a refueling point
invalidate any approval or warranty applying to
(service station) or near fuels or chemicals.
the phone, and may be dangerous.
Switch off in aircraft
When you disconnect the power cord of any
Wireless phones can cause interference. Using
accessory, grasp and pull the connector, not the
them on aircraft is both illegal and dangerous.
cord.
Switch off in hospital
In addition, you can obtain the following
Follow any regulations or rules. Switch phone off
accessories for your phone from your local
near medical equipment.
dealer:
Respect special regulations
• Hands-free car kit
Follow any special regulations in force in any
• Slim, Standard, and Extended Li-Ion batteries
area and always switch off your phone whenever
• PC Synch Software
it is forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Interference
All wireless phones may be subject to radio
interference, which may affect their performance.
Use qualified service
Only qualified service personnel must repair
equipment.
Use sensibly
Use only in the normal position (to ear). Do not
touch the antenna unnecessarily when the phone
Emergency calls
Enter the emergency number (911 or another
Unpacking
Your Phone
Your package contains the following items.
Part of Your Phone
Phone
The following illustration shows the main
Battery
elements of your phone.
Travel Adapter
Front View
Ear-micro phone
Earpiece
Data Cable
Navigation /Hot keys
User Manual
Right soft key
End/Power on-off key
Display
Left soft key
Send keys
Alphanumeric keys
Microphone
Speaker
Earphone jack
Display
LED
Rear View
Hand strap hole
SIM card socket
Battery terminals
Battery Lock
Cable connector slot
Display
Backlight
The display comprises three areas.
The display and keypad are illuminated by a
Icons
backlight. When you press any key, the backlight
Text and graphic area
illuminates. It turns off if no key is pressed within
Text indications
a given period of time.
Area Description
To specify the length of time the phone waits
First line displays various icons (see next page).
before the backlight turns off, set the Backlight
Middle line Display messages, instructions and
menu.
any information that you enter (number to be
dialed, for example). Last line shows the
functions currently assigned to the two words.
Icons
Signal strength: Shows the received signal
strength. The greater the number of bars shows,
the better the signal is strong.
No Service: Appears when you are outside a
service area. With it displayed, you cannot make
or receive calls. Wait a little while for a better
signal or move into an open area to regain the
service.
Roaming: Appears when you are out of your
home area and have registered with a different
network (when traveling in other countries,
for example).
New Message: Indicates that there is a new
message waiting to be checked. (VS indicates
voice mails, and SMS means text messages.)
Alarm: Appears when you set an alarm.
Vibration mode: Appears when the ring volume
for calls is set to Vibrate.
Battery status: Shows the level of your battery.
The more bars you see, the more power you have
left.
Getting Started
Charging the Battery Alone
Installing a SIM Card
charger unit.
To charge the battery alone, use the desktop
When you subscribe to a mobile network, you
1. Open the cover of the desktop charger.
are provided with a plug-in SIM card loaded with
2. Insert the battery alone into the slot making
your subscription details (PIN, optional services
sure that the terminals on the battery contact
available and so on).
to the terminals on the slot.
1. If necessary, switch the phone off to press
3. Push down the battery until you hear a click.
and hold down the  key.
4. Insert the lead of the travel adapter into the
2. Remove the battery. To do so:
① After pushing the lock button, pull the battery
cover toward outside.
② Lift the battery away, as shown.
3. Insert the SIM card ensuring that the cut
connector socket of the desktop charger.
5. Connect the adapter to a standard AC wall
outlet.
6. The color indication of the LED on the charger
is as follows:
corner is at the top right and the gold contacts
• Red : charging
of the card face into the phone.
• Blue : fully charged
4. Reinstall the battery. To do so:
① Place the battery so that the tabs on it align
to the connectors at the inside of the phone.
② Close the battery cover until it clicks into
7. When charging is finished (the LED turns in
green), unplug the power cord of the adapter
from the AC outlet and remove the battery
from the charger.
place. Make sure that the battery is properly
Charging the Battery with the
installed before switching on the phone.
Phone
Charging a Battery
You can use the phone while charging by
Your phone is powered by a rechargeable Li-ion
charging the battery attached to the phone.
battery.
1. With the battery in position on the phone,
A travel adapter and a desktop charger are
connect the lead from the travel adapter to
provided with your phone. Use only approved
the connector at the bottom of the phone.
batteries and chargers. Ask your local dealer for
further details.
………………………………………………………………………………
2. Connect the charger to a standard AC wall
outlet.
3. When charging is finished (the LED turns in
Note: You must fully charge the battery before using
green), disconnect the adapter from the power
your phone for the first time. The phone can be
outlet and from the phone.
used while the battery is charging.
……………………………………………………………………………………………
Low Battery Indicator
WARNING!
When the battery charge level gets low, you can
Do not switch on the phone when the mobile phone use
see an empty battery icon at the top right of the
is prohibited or when it may cause interference or
display and a text notification.
danger.
Empty
battery icon
Your Phone’s Mode
Standby Mode
If the battery level gets too low, the phone will
Standby is the most basic state of your phone.
turn off automatically. Unfortunately, if this
The phone goes into Standby mode soon after
happens, you’ll lose whatever you are doing,
you turn it on, or whenever you briefly press
including dropping your call. Watch the battery
thekey. When your phone is in
strength icon and make sure your battery is
Standby mode, you will typically see the current
adequately charged.
date and time.
Switching the Phone
On/Off
If you enter a phone number, you can press
1. Press and hold down the key for
key to save it in the internal Phonebook.
more than one second to switch the phone on.
2. If the phone asks for a password, enter the
the key to dial it, or press the Save soft
Press the  key at any time to
return to Standby mode. Be careful; if you are on
password. For details on the phone password,
a call when you press the  key,
see Password
you will return to Standby mode, but it also
3. If PIN code request of your SIM card is
disconnects the call.
enabled, your phone asks you to enter the PIN
Press the C or Back soft key several times or
code. Enter the PIN code, then your phone
hold it down to return to Standby mode without
connects to the GSM network.
ending the call.
The 3 lights on the cover of the phone flashes,
Talk Mode
and an alert sounds. When the system locates
You can place and answer calls only when your
services, you can see the following idle screens
phone is turned on. During a call, the phone is in
on the main and front LCD respectively.
Talk mode. While you are in Talk mode, pressing
If the phone is out of service, the icon
 gives you a list of options
and ‘No Service’ appear in the display. In this
referred to as “In-Call Options.”
case, you cannot place and receive calls. You
can try again later when service is available.
4. When you wish to switch the phone off, hold
down the key for more than two
seconds
Call Functions
Ending a Call
Making a Call
 key.
When you have finished your call, press the
To make a call, proceed as follows:
1. In Standby mode, enter the area code and
The call time (length of the call) displays with
phone number.
the number of the called party. If the number is
………………………………………………………………………………
stored in your Phonebook, the name is displayed.
Note: When entering the number, pressing and
If there is no match in Phonebook, you can press
holding down the key inserts a pause. The
the Save soft key and store the number to the
number after a pause will be sent a few
Phonebook. For further information on storing
seconds after dialing the first number.
the number in the Phonebook, see [Phonebook]
……………………………………………………………………………………………
menu.
2. Press the key. The phone places the
call to the entered number.
Or, simply close the phone to end a call.
………………………………………………………………………………
Note: If you have set Auto Redial menu (Menu 4-6-3) to
Making International Calls
On and when nobody answers to you or the line is busy,
1. Press and hold down the O key.
the phone automatically retries to make the call.
The + appears in display.
……………………………………………………………………………………………
2. Enter the country code, area code, and phone
Correcting the Number
number, then press the key to begin
To clear...
Then press...
dialing.
The last digit
the C soft key displayed
Any other digit
the or
in the number
 key
Making a Call from the
Phonebook
You can store the phone numbers called regularly
until the cursor is
in memory, called Phonebook. You then simply
immediately to the right of
recall the number to dial. For further information
the digit to be cleared.
refer to [Phonebook] menu.
Press the C soft key. You
can also insert a missing
Redialing the Last Number
digit simply by pressing the
To redial the number you dialed last, press
appropriate key.
thekey twice.
The whole display hold down the C soft key for
Your phone stores up to 30 last numbers you
more than one seconds.
dialed in Call Records. To recall any of these
numbers, refer to ‘Dialed No.’ on [Call Records]
part.
Adjusting the Volume
Viewing Missed Calls
During a call, if you want to adjust the voice
If you are unable to answer a call for any reason,
volume, go to Sound menu of the phone.
you can find out who was calling you, if this
You can select in Low, Medium, High and
service is available. In this way, you can call the
Increasing.
person back, if necessary.
Answering a Call
The number of missed calls is displayed on the
When somebody calls you, the phone alerts you
idle screen immediately after the call was
by ring, blinking service light and the following
missed.
screen on the display.
If you have subscribed the Line Identification
The number corresponding to the most recent
Service (contact your service provider) and the
missed call is displayed, if available.
caller can be identified, the caller’s phone number
(or name if stored in your Phonebook) is
To...
Then press the...
displayed.
Scroll through the
 or
missed calls
 key.
phone.
Call the number
key.
If the phone is set to Any-Key answer, you can
Displayed
1. To answer a call, press Answer key of the
answer a call by pressing any key except
the key.
Edit or delete a
Opt soft key
If the menu is set to Send Key Only, you must
missed call number
(see the following
press the  key to answer the call.
2. End the call by pressing the 
key.
… … … … … … … … … … … … … … … … … … … … … … … … … … … …
Note: You can answer a call while using the Phonebook
or menu features. The current operation will be
interrupted.
… … … … … … … … … … … … … … … … … … … … … … … … … … … …
paragraphs).
Editing a Missed Call Number
immediately.
1. Press the Opt soft key.
Press and hold the <*> key again to return to
2. When Edit is highlighted, press the SELECT
bell mode.
soft key.
This feature is convenient when you are in a
3. Change the number as required.
hurry to mute the phone sound (in a theater, for
4.
example).
To...
Call the number
Store the number
Then press the...
 key.
Save soft key and enter
In-Call Options
the name and select
Your phone provides a number of functions that
location required (for
you can use during a call. You may not utilize all
further details, refer to
of these functions at all times. Many of the in-call
[Call Records]
options are for network services.
Putting a Call on Hold
Deleting a Missed Call
You can place the current call on hold whenever
1. Press the Opt soft key.
you want. By doing this, you can make or
2. Press the  or  key to highlight the Delete option.
progress if this service is supported by the
3. Press the SELECT soft key.
network.
You can press the  key at any
time to exit the Missed Call feature.
To make a call while you have a call in progress,
………………………………………………………………………………
proceed as follows.
Note: You can access the Missed Calls feature at any
1. Press the Opt soft key to enter In-Call
time by selecting the Missed No. menu in Call
Options.
Records.
2. When Hold Call is highlighted, press the
……………………………………………………………………………………………
SELECT soft key to put the current call on hold.
3. If there is a waiting call, press the
Quick Switching to
Vibration Mode
If you want to make a call, dial the number in
You can quickly switch your phone to the
normal way.
vibration mode with a touch of the key.
Retrieving a Call
In Vibration mode, Your phone alerts you an
If you have a call already on hold, you can
incoming call by vibrating the phone instead of
retrieve that call.
key to answer the call.
ringing.
1. Press the Opt soft key to enter In-Call
Press and hold the <*>key until the Vibration
Options.
Mode icon and ‘Vibrate’ appears in the display.
2. Select Retrieve Call by pressing the
Your phone goes to the vibration mode
 or  key
press the SELECT soft key.
2. Select Private by pressing the  or  key and press the
Swapping Between Two Parties
SELECT soft key.
When there are an active call and a held call,
The call is ended with that participant, but you
this menu places the active call on hold and the
can continue to talk with the other participants.
held call on active. You may swap between the
3. To end the conference call, close the phone or
two parties back and forth.
select Disconnect by pressing the  or  key and press the
Options.
SELECT soft key in in-Call Options.
2. Select Swap Call by pressing the
Disconnecting the Calls
 or  key,
When you have an active call and the held call,
press the SELECT soft key.
you can disconnect the calls at one time.
3. Repeat steps 1 and 2 as required.
1. Press the Opt soft key to enter In-Call
Making a Conference Call
Options.
Conference Call allows up to six people to take
2. Select Disconnect by pressing the
part simultaneously in a call.
 or  key
Making a Conference Call
and press the SELECT soft key.
1. During a call, dial a phone number, and press
3. Select the desired call you want to disconnect
the key. The first call is put on hold.
by pressing the  or  key.
press the Opt soft key and then enter In-Call
Options.
• Active Call: disconnects the call which is
3. Select Conference Call by pressing the
currently activated.
 or  key
• Held Call: disconnects the call which is
and press the SELECT soft key.
currently on hold.
4. To add more participant to the call, repeat
• All Call: disconnects all calls which are
steps 1 to 2, and Select Add Conference Call
currently connected with you.
by pressing the or  key and press the SELECT soft key.
Dropping One Participant
1. During a conference call, in the list of call
participants, highlight the required person, by
pressing the  or  key, followed by the Opt soft key and
choose the Conference Call option.
4. Press the SELECT soft key.
Muting the Microphone
Using the Message Service
You can temporarily switch your phone’s
Your phone can receive an incoming message
microphone off, so that the other party cannot
during a call. You can read it immediately without
hear you.
disconnecting the call. Also, you can send a
message during a call.
Example: You wish to say something to another person
in the room but do not want the other party to hear you.
1. Press the Opt soft key and select Call
Message by pressing the key.
To switch the microphone off temporarily,
2. Press the SELECT soft key
proceed as follows.
The phone enters the Message menu. Refer to
1. During a call, press the Opt soft key to enter
In-Call Options.
2. Press the  or  key to highlight Mute.
3. Press the SELECT soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Opt soft key to enter In-Call
Options.
2. Press the  or  key to highlight Unmute.
3. Press the SELECT soft key.
Your correspondent can hear you again.
[Messages] menu.
Net Service
The current status is displayed. To Divert activate
These menu functions are network services.
 and SELECT Soft Key.
or deactivate, press  or
Please contact your service provider to check
their availability and subscribe to them, if you so
1. To...
wish.
Activate call
Call Divert
This network service enables incoming calls to be
Then...
• Select Set and Press the
SELECT soft key.
diverting
• Go to step 2.
----------------------------------------------------
Change the
• Select Set and Press the
Example: You can:
call number
rerouted to the number that you specify.
• systematically divert fax calls to your office fax
SELECT soft key.
• Go to step 2.
machine.
• divert voice calls to your colleague if you are
already using the phone.
----------------------------------------------------
Deactivate
• Select Cancel and Press
the SELECT call diverting
soft key.
You can specify individual diverting options for
each of the following call types:
2. Enter the number to which the calls are to be
diverted and press the SELECT soft key.
• Voice calls
To enter the international code, press the 0
• All data calls
key until the + sign is displayed.
• All fax calls
The phone sends your settings to the network
and the network’s acknowledgement is displayed.
after selecting the item, you can select the
You can deactivate all call diverting settings by
service.
selecting the Cancel All option.
Example: You may wish to divert your business
calls to a colleague while you are on holiday.
Call diverting can be set up in the following ways.
All Calls: all calls are diverted.
If Busy: calls are diverted if you are already
making another call.
If No Answer: calls are diverted if you do not
answer the phone.
Cancel All: all call diverting options are cancelled.
Call Barring
To set your call barring options, proceed as
The call barring network service allows you to
follows.
restrict your calls.
1. Select the type of calls to be barred by
First you can select the item among below ones.
pressing the  or  key until the appropriate option is
each of the following call types:
highlighted and then press the SELECT soft key.
2. Select the type of call barring required by
• Voice calls
pressing the  or  key until the appropriate option is
• All fax calls
highlighted and then press the SELECT soft key.
3. Press the Activate soft key to confirm your
Call barring can be set up in the following ways.
settings.
4. Enter your call barring password supplied by
All: calls cannot be received or made.
your service provider.
Outgoing: calls cannot be made.
The phone sends your settings to the network
International: international calls cannot be
and the network’s acknowledgement is displayed.
made.
Int exp. Home: when abroad, calls can be
To deactivate specific call barring settings,
made only to numbers within the current country
proceed as follows.
and to your home country, that is the country
where your home network provider is located.
1. Select the type of call to which this option
When Roam: calls cannot be received when you
applies.
are using your phone outside your home service
2. Select the call barring option to be
area.
deactivated.
Cancel All: all call barring settings are
3. Press the Deactivate soft key.
deactivated; calls can be made and received
4. Enter your call barring password supplied by
normally.
your service provider.
You can specify individual barring options for
each of the following call types:
The phone sends your settings to the network
and the network’s acknowledgement is displayed.
• Voice calls
You can also deactivate all call barring settings
• All data calls
by selecting the Cancel All option.
• All fax calls
You can set and change the call barring password
obtained from your service provider using the
Password Change option. You must enter the
current password before you can specify a new
one. Once you have entered a new password,
Network Selection
you are asked to confirm it by entering it again.
The Network Selection feature enables you to
Call Waiting
indicate whether the network used when roaming
This network service enables you to be informed
(outside your home area) is selected
when someone is trying to reach you during
automatically or manually.
another call.
You can specify the call waiting option for voice
Note: You can select a network other than your home
calls only.
network only if it has a valid roaming agreement
To set your call waiting options, proceed as
with your home network.
follows.
The screen informs you whether call waiting is
To indicate whether the network is to be selected
activated or deactivated.
automatically or manually when roaming,
- You can activate or deactivate the call waiting
proceed as follows.
feature as necessary using the Activate or
Deactivate soft key respectively.
1. Press the  or  key until the appropriate option is
You can send your phone number to the
highlighted and then press the SELECT soft key.
designated phone when making a call so that the
If you select Automatic, you are connected
recipient can see your phone number.
to the first available network in the preferred
list when roaming.
Note: Some networks do not allow the user to change
If you select Manual, the phone scans for
this setting.
the available networks. Go to Step 2.
2. Press the  or  key until the preferred network is
highlighted and then press the SELECT soft key.
Off: your number is not displayed on
the other party’s phone.
On: your number is sent each time you
make a call and displays on the other party’s
phone.
You are connected to that network.
Phonebook
number.
You can store phone numbers and their
Speed-Dialing from
Phonebook
corresponding names in the memories of your
Once you have assigned speed-dial allocation to
SIM card and the phone. You can store up to 500
the Phonebook entries (refer to ‘Speed Dials’ in
and 200 entries respectively the SIM card and
Phonebook options), you can dial the number
phone memories, although physically separate,
with one key press. Speed-dialing will save you
are used as if they were a single entity, called the
entering all digits of the number.
Phonebook.
To speed-dial a number, press and hold down the
appropriate key 2 to 9 in Standby mode.
……………………………………………………………………………
Note: Memory location 1 is reserved for your Voice
Mail server number.
…………………………………………………………………………………………
Storing a Phone Number
with a Name
Using Phonebook Options
1. Key in the number to be stored.
right soft key to allow you to access the
………………………………………………………………………………
Phonebook. The Phonebook provides you with
Note: If you make a mistake while entering a number,
the various options.
correct it using the C key. For further details,
Accessing the Options
refer to eZi text input.
To access the various Phonebook options,
………………………………………………………………………………
proceed as follows.
In Standby mode, Names appears above the
2. When you are sure that it is correct, press the
Save soft key.
1. In Standby mode, press the Names soft key.
3. Enter the corresponding name up to 20
The first available option is highlighted.
characters.
2. To...
For information on how to enter a name, see eZi
Select
text input.
highlighted option
Then press the...
the SELECT soft key.
If necessary, press the key to
highlight the Number field and edit the number.
4. When you are satisfied, press the SELECT soft
Highlight a
different option
the  key one or more
key.
times until the required
5. Press the  or  key to select the desired memory location
from Phone and SIM Card.
6. Press the SAVE soft key to store the name and
Exit the Phonebook
Back soft key or the
 key.
Back soft key to cancel copying.
The Selectable Options
Search All
Move
This option lists all Phonebook entries by name.
This option allows you to move the selected entry
- Press the  or  key until you find the desired entry.
vice versa.
Then, press the  key to dial the number
1. Press the  or  key to select where the entry will be
Search
moved, SIM -> Phone or Phone -> SIM. Then,
This option allows you to find a entry by its
press the SELECT soft key.
name.
2 .Select the desired one from the following
Add Entry
options using the  or
This option allows you to create a new entry.
 key and press the SELECT
Enter the desired name and number, then select
soft key.
memory location.
Copy
This option allows you to copy the selected entry
from the phone memory to the SIM memory and
vice versa.
• One by One: allows you to move a selected
entry one by one to another place
• Copy All: to move all entries in the memory
location to another place.
1. Press the  or  key to select where the entry will be
press the SELECT soft key to move the entry or
copied, SIM -> Phone or Phone -> SIM. Then,
press the SELECT soft key.
the
Back soft key to cancel copying.
2 .Select the desired one from the following
Delete All
options using the  or
This option allows you to delete all entries in SIM
 key and press the SELECT
card or Phonebook memory.
soft key.
Select the desired memory location. When a
confirming message appears, press the SELECT
• One by One: allows you to copy a selected
entry one by one to another place
• Copy All: to copy all entries in the memory
location to another place.
soft
key. If you want to cancel, press the Back soft
key.
Memory Status
You can check how many names and numbers
3. When your phone confirms your selection,
are stored in the Phonebook (SIM card and phone
press the SELECT soft key to copy the entry or
memories).
the
Speed Dials
• Define your caller groups. You can define up to
Using this option, you can assign a speed dial
10 caller groups.
location to the desired entries. You can assign up
• Assign the numbers in the Phonebook to the
to 8 entries (2 to 9). For more details on speed-
appropriate group.
dialing, see [Phonebook] menu.
To add speed dial allocation, do as follow:
To add and define a caller group, do as follows:
1. Press the  or  key to find the desired location and
pressing the  or  key. And press the Option soft key.
2. Press the  or  key to find the desired entry and press
SELECT soft key. The group is added.
the OK soft key.
3. When the new group is highlighted, press the
Opt soft key.
To change or delete speed dial allocation, do as
4. When Member List is highlighted, press the
follows:
SELECT soft key.
1. Press the  or  or  key to select the desired speed dial
Down> key to select Join Member and press
entry and press the Opt soft key.
the SELECT soft key.
2. The phone shows the name and number of
the entry. press the SELECT soft key.
Join Member option allows you to add an
3. Press the  or  key to select the desired option and
from the list.
press the SELECT soft key.
To delete a caller group, do as follow:
• Change: allows you to change the speed
1. Select the group to be deleted by pressing the
dial number of the selected entry. Enter the
 or  key
desired entry number.
and press the Opt soft key.
• Delete: allows you to delete the selected
2. Press the  or  key to select Delete All and press the
press the SELECT soft key to delete.
SELECT soft key.
3. When your phone confirms your selection,
Group
press the SELECT soft key to delete the selected
You can set the phone to ring in a specific way
group or the Back soft key to cancel deleting.
When a particular person calls you.
To change the name a caller group, do as
follows:
To do so, you must:
1. Select the group to be deleted by pressing the
 or  key
and press the Opt soft key.
2. Press the  or  key to select Rename Group and press
the SELECT soft key.
3. Edit the name of the group as your reference,
and press the SELECT soft key.
Own Number
This feature allows you to:
• Store your own phone numbers registered on
your SIM card with a name
• Edit the names and numbers
This function is a memory aid, which you can use
to check your own phone numbers if you need to
do so. Any changes made here do not in any way
affect the actual subscriber numbers on your SIM
card.
1. Press the SELECT soft key.
2. Enter a name and press the SELECT soft key.
For further details refer to entering text part
3. Enter the number and press the SELECT soft
key.
Once you have stored the numbers, you can see
the number list when you access this option.
Press the Opt soft key and the following options
are available:
Add: allows you to add your number with a name.
Edit: allows you to edit the name of the selected
number.
Delete: allows you to delete the selected number
from the list
Recent Call
Outgoing Call
This option lets you view the last 30 numbers
Via this menu, you can view the following
which you recently dialed regardless they are
submenus:
successfully connected or not.
Whenever you scroll to call record list,
• Outgoing Call
You can View details on the call in the bottom of
• Incoming Call
screen.
• Missed Call
• Call Timer
To...
Press the...
- Last Call
Scroll to the desired
 or
- Incoming Calls

- Outgoing Calls
- All Calls
The number and name (if available) are given,
Make a call
 key.
Exit the call record
Back soft key one or
together with the date and time at which the call
more times or key.
To view all call records include incoming,
Outgoing, Missed Call, press the  key in
When you view details on the number, press the
Standby mode.
Opt soft key and the following options are
available:
Store Number:
Allows you to save the number into your
Phonebook.
Send Message :
Allows you to send SMS to the number.
Delete: Deletes the selected number.
When a confirmation message, press the Right
soft key.
Delete All : Delete all number in the selected
menu.
When a confirmation message, press the Right
soft key.
Incoming Call
This option lets you view the 30 numbers which
you recently received. Your phone records these
numbers only if you subscribe the Line
identification service.
Missed Call
This option lets you view the 30 numbers which
you recently received, but failed to answer. Your
phone records these numbers only if you
subscribe the Line identification service.
Call Timer
This option inform user of call time duration
information and consists of Last Call, Incoming
Calls, Outgoing Calls, All Calls submenu.
Last Call
allow you to view the latest call duration.
Incoming Calls
Allow you to view total call duration about
Incoming calls
Outgoing Calls
Allow you to view total call duration about
Outgoing calls
All Calls
Allow you to view total call duration about
Incoming, Outgoing call when you view call
duration information, if you press right soft key,
you can reset call duration information.
Messages
pressing
Search key and then use
The SMS (Short Message Service) function is a
the number, press SELECT soft key
network service and may not be supported by
4. Before sending the message, the phone will
your network.
check the SMS Center number. If the number is
Messages can be sent by text, e-mail and paging
not stored, you can send the message after
messaging systems, provided that these services
inputting the number.
 key. If you find out
are supported by your network. To send text
messages by phone, you must obtain the number
Out Message
of the SMS centre from your service provider.
Out Message stores the messages that you have
Your phone can store up to 20 incoming and
already sent or will send.
outgoing messages. If the message memory is
When you enter this menu, you can see the first
full, an error message is displayed and you
stored message. Scroll to the desired message by
cannot receive or save any new messages. If
using the  key and
then, you should delete obsolete messages in [In
scan through the message by pressing the
Message] menu in [Message].
 or  key.
To access the Messages menu, press the key
Press the Edit soft key to edit the message text
in Standby mode.
or use the options.
Write Messages
While viewing a message, you can choose the
Via this menu, you can write text messages of
following options, by pressing the Opt soft key:
up to 160 alphanumeric characters and for
Chinese 70 characters are allowed.
Send: sends the selected message.
Save: saves the selected message if you have
1. When accessing this menu, the following
options are available.
changed.
Extract Number: extracts a number from the
• Send: sends the message immediately.
message if it has, so that you can call the
Enter the message and then input a number
number or save it in the Phonebook.
or search the stored number
Delete: deletes the selected message from
• Save: allows you to save the message so
Out Message.
that it can be sent later. You can read the
Delete All: deletes all messages stored in
message in your Out Message.
Out Message. When a confirming message
2. Create the message as needed. For further
details on how to enter text, see below. See
[ Ezi Text Input ].
3. Input the full number, press Select soft key
or You can also find the stored number by
appears, press the SELECT soft key to remove
them or the Back soft key to cancel deleting.
In Message
Memory Status
In Message stores the messages that you have
This menu shows you the status of memory for
received.
messages regardless of Out Message or In
When you received a new message, ‘Received
Message. You can see the number of the stored
Message’ and New message icon ( ) appears in
messages and the total number of the message
display.
the phone can store.
To read the message immediately, press the
Setting
SELECT soft key.
Via this menu, you can set up default SMS
Once you enter this menu, you can see the last
information.
received message. Scroll to the desired message
The following options are available:
by using the  or  key scan through the message by
service Cent: allows you to store or change the
pressing the  or  key.
sending messages. You must obtain this number
Press the Opt soft key to use the following
from your service provider.
options.
Validity: allows you to set the length of time for
While viewing a message, you can choose the
which your text messages will be stored at the
following options, by pressing the Opt soft key:
message centre while attempts are made to
deliver them to you. 1 hour, 6 hours, 12 hours,
Reply: allows you to send a reply message to the
1 day, 2 days, 1 week, and Max are available.
sender.
Selecting Max stores the message as long as
Forward: allows you to forward the selected
defined in SMS center.
message to another phone number.
Extract Number: extracts a number from the
SMS Alert: allows you to set how many times
message if it has, so that you can call the
and how often the phone alerts you the incoming
number or save it in the Phonebook.
messages. If you do not want to be alerted,
Delete: allows you to delete the selected
select OFF. If you select One Time, the phone will
message.
alert you just one time when a messages comes
Delete All: deletes all messages stored in Out
in. If you select Periodic, the phone will alert you
Message.
at every predefined times.
When a confirming message appears, press the
Status Report: allows you to activate or
SELECT soft key to remove them or the Back
deactivate the report function. When this function
soft key to cancel deleting.
is activated, the network informs you whether
your message has been delivered or not.
When you receive Status Report, it is
automatically displayed on the screen. If the
message is so long and cannot display all in a
CB Alert: allows you to set how many times and
screen, scroll through it by pressing the
how often the phone alerts you the incoming
 or  key.
CB messages. If you do not want to be alerted,
Your phone will store it until a new message of
select OFF. If you select One Time, the phone
the channel is reached.
will alert you just one time when a messages
GSM: allows you to set GSM/CSD mode.
comes in. If you select Periodic, the phone will
alert you at every predefined times.
Cell Broadcast
Call Voicemail
Cell Broadcast messages are text messages
Using this menu, you can listen to your voice
broadcasted by the network to groups of GSM
Messages.
phone users. They provide general information
……………………………………………………………………………….
such as weather reports, traffic news, and stock
Note: To quickly connect to the voice server, press and
market prices. Each type of information has an
hold down the 1 key.
associated information type number.
……………………………………………………………………………………………
When you receive broadcast message, it is
Voice Mail
automatically displayed on the screen. If the
If your phone stores voice message center
message is so long and cannot display all in a
address, it calls automatically, otherwise, asks to
screen, scroll through it by pressing the
enter the number.
 or  key.
Voice Mail is a network feature. Please contact
Your phone will store it until a new message of
your service provider for more information.
the channel is reached.
Set Voice Mail
allows you to store or change the number of your
The following options are available.
Voice message centre required when listening to
Activate: allows you to enable or disable the
your voice messages. You must obtain this number
reception of broadcast messages. Select ACtivate
from your service provider.
to receive the broadcast messages or Deactivate
not to do.
Read: lets you view the last received messages.
NEW: allows you to indicate the channels from
which you wish to receive broadcast messages by
adding the CB message category in the phone or
SIM memory.
Several options are available.
LIST: View the channel from the list
Delete: used to remove a channel from the list by
 key.
Entering Text
Changing Text Input Mode
When you are in a field that allows characters
When using your phone, you will need to enter
entry, you should notice the text input mode
text at many times. For example, when storing a
indicator in the display.
name in the Phonebook, creating a greeting note,
To change to another text input mode;
writing a text message or scheduling events in
1. Press the @ key repeatedly until you find the
your calendar.
desired mode.
2. Press the  key
The following text input modes are available.
repeatedly until you find the desired input
• Ezi Pinyin: allows you to enter the Chinese
mode from the list.
characters using their pinyin, the phonetic
3. Press the SELECT soft key.
system.
• Ezi Stroke: allows you to enter the Chinese
You will see the text input mode indicator in
characters using their Strokes.
the top line of the display:
• Ezi English: allows you to enter the English
letters by pressing each key once for each
• Ezi Pinyin mode › Pinyin
character. The words are predicted along along
• Ezi Stroke mode › Stroke
with other candidates that fit the letters typed
• Ezi English mode › Letter
thus far.
• Ezi ABC mode › ABC, Abc, or abc
• Ezi ABC: allows you to enter letters by pressing
• Ezi 123 mode › 123
the key labeled with the desired letter once, twice,
• Symbol mode › Symbol
or three times until the letter appears on the
• Dictionary mode › Dictionary
display.
• List Dictionary mode › List Dictionary
• Ezi 123: allows you to enter numbers.
• Symbol: allows you to enter the symbols or
Directions for using each of the text input modes
punctuation marks.
appear later in this chapter.
………………………………………………………………………………
Note: All text input modes are not available when
entering characters. When entering a name for a
Phonebook entry, for example, only Letter mode is
available.
……………………………………………………………………………………………
Ezi Pinyin Mode
To insert a space, press the 0 key.
Pinyin is a system to mark Chinese pronunciation
Scrolling through the Alternative Pinyin
in Latin alphabets. With the pinyin input method,
or Characters
you can enter Chinese characters by keying in
• The < or > key scrolls to alternative pinyin
the pinyin string from the phone keypad and the
strings for the keypresses.
phone automatically presents the matching
• The  or 
alternatives.
key scrolls to the alternative characters
corresponding the entered pinyin spelling.
Typing Characters in Pinyin Mode
Clearing Pinyin Spelling and Characters
1. Press keys corresponding to the phonetic
Press the Back soft key one or more times to
spelling, referring to the Roman letters printed
remove pinyin spelling to the left. Once the Pinyin
on the keys. Notice that the choices in the
Area is empty, pressing the Back soft key
Character Selection Map change.
removes characters from the Text Area.
Rapid Character Entry
Example: Typing 力 in Pinyin mode
Rapid character entry is easy in any mode, using
1.To find the candidates for the keypresses in
the Character Selection Map. As you enter
the Pinyin Area, press the key.
character you might want and presents choices
Tomove back, press key.
in the Character Selection Map area. When a
2. If you cannot find the character you want,
desired character appears, you may select it as
press the key to scroll
described on [ ].
through choices in the Character Selection map.
To move back, press the  key.
For example, when you type the word “zhong
When the character you are typing appears in
guo (中國 )”, if you enter the first character
the Character Selection Map, you may select
using the following keyStrokes; 9, 4, 6, 6, 4, 1,
it, without completing the Pinyin spelling for
1, you do not have to complete the Pinyin
the character.
spelling to include “guo (國)”. With no extra
3. To select a character, press the 1 key to
typing, the letter is displayed conveniently in the
activate the Character Selection Map.
Character Selection Map for you to choose.
A number (1 to 6) is added above a
corresponding character.
4. With the Character Selection Map being
activated, a normal press on the 1 key to the
6 key selects the corresponding character.
5. Repeat steps 1 to 4 to enter more characters
as required.
Ezi Stroke Mode
character. Characters displayed in the Character
This mode allows you to enter individual Chinese
Selection Map correspond to keys 1 to 6 on the
Strokes, in written order - from top to bottom,
keypad. To select a character from the Character
and from left to right.
Selection Map and add it to your message, press
Even though there are many different Strokes
the corresponding key.
used to create Chinese characters, the Strokes
………………………………………………………………………………
are classified into 5 basic categories; heng, shu,
Note: If you are uncertain of the order of one or more
pie, dian and zhe. The basic Strokes are printed
Strokes, press the # key in place of each
on the keypad, on keys 7 to 0.
questionable Stroke. Continue entering Strokes
To enter a Stroke, press the key printed with the
until the character is displayed in the Character
Stroke that most closely represents the exact
Selection Map or until you have finished the
Stroke you desire. The table shows the
character.
Stroke/key relationship:
……………………………………………………………………………………………
Categories Keys Strokes represented in each
Scrolling
Categories.
• The  or 
Typing StSelectes and Characters in
key scrolls to the alternative characters
Stroke
corresponding the entered pinyin spelling.
Mode
• The < or > key moves the cursor left or right
1. To type a character, press keys corresponding
in Text area.
to its component Strokes. Press keys on the
Clearing Strokes and Characters
handset in the order that you would write the
Press the Back key one or more times to remove
Strokes, using one press per desired Stroke.
Strokes to the left. Once the Stroke Area is
empty, pressing the Back key removes
Example: Typing (力 ) in Stroke mode
characters from the Text Area.
Rapid Character Entry
2. The phone displays your Strokes in the Key
Rapid character entry is easy in any mode, using
Stroke Area and offers character choices in
the Character Selection Map. As you enter
the Character Selection Map. As you enter
characters, your phone predicts the next
Strokes, notice that the choices in the Character
character you might want and presents choices
Selection Map change. To scroll through choices
in the Character Selection Map area. When a
in the Character Selection Map, press
desired character appears, you may select it as
the key. (To move back,
described above.
press  key.)
In most cases, you will see the desired character
3. When the character you are typing appears in
in the Character Selection Map area before you
the Character Selection Map, you may select it
have entered all of the Strokes to build it.
without finishing the Stroke sequence for the
For example, try typing the twelve Stroke
displays the most commonly used choice first.
character pair “中國 “ using the following
………………………………………………………………………………
keyStrokes; 8, 3, 1. Even though “中國 “ is a
Note: The phone displays all the words which is
twelve Stroke character pair, your phone enables
containing the letters you have entered. By doing
you to type it in only three key presses!
this, the eZi mode saves you typing extra keypresses.
Ezi English Mode
……………………………………………………………………………………………
This mode allows you to enter English words with
Smart Punctuations
only one keypress per letter. Each key on a
Period, hyphen, and apostrophe are available on
keypad has more than one letter - a single press
the 1 key. eZi applies rules of grammar to insert
on the 5 key could be J, K, or L. The Ezi English
the correct punctuation. Notice that the 1 key is
mode automatically compares your key presses
used twice in this example to display two
to an internal linguistic database to determine
punctuation marks:
the correct word.
Shifting a Case
The mode requires far fewer keyStrokes than
To change the case of the word, press the
the traditional multi-tap method; ABC mode.
 key repeatedly when
Typing English Words
the word is highlighted. Lower Case, Capital Lock
To type a word, press keys corresponding to the
and Initial Capital are available. Also you can
letters you need. Remember the following as you
insert periods between the alphabets for
are typing:
abbreviations.
Scrolling
1. Press keys on the phone just once per desired
• The  key scrolls to
letter. For example, to enter ‘hello’, press the
the alternative characters corresponding the
following keyStrokes: 4, 3, 5, 5, 6.
keypresses.
2. The word you are typing appears in the
• To view your message without moving the
display. It may change with each key you
cursor, press the volume keys on the left side
press.
of the phone.
3. Type to the end of the word before editing or
• To move the cursor left or right through your
deleting any keyStrokes.
text message, press the < or > key. Note that
4. Complete each word with a space by pressing
pressing the > key without completing a word
the 0 key.
by the 0 key displays the alternative word.
Clearing Characters
If the word that appears in the display is not the
Press the Back soft key one or more times to
word that you desire, press the key one or more
remove characters from the Text Area.
times to display alternate word choices for the
keys you have typed. (For example, ‘of’ and ‘me’
both shares the sequence 6, 3) The phone
There are two shift states:
Letter Mode
Lower Case is indicated by abc in the display,
Letter mode is indicated by ABC. When typing in
and Capitals Lock is indicated by ABC.
Letter mode, you should press key labeled with
Scrolling
the required character:
• To view your message without moving the
-Once for the first character
cursor, press the volume keys on the left side
-Twice for the second character and so on.
of the phone.
• To move the cursor left or right through your
For example, you press the 2 key three times
text message, press the < or > key.
quickly to display the character “C” , the 5 key
Clearing Strokes and Characters
two times quickly to display the character “L”.
Press the Back soft key one or more times to
So, this method is called Multi-tap typing.
remove characters from the Text Area.
The cursor moves to the right when you press a
Number Mode
different key. When entering the same character
Number mode is indicated by 123. It enables you
twice (or a different character on the same key),
to enter numbers into a text message. Press keys
just wait for a few seconds for the cursor to move
corresponding to the desired digits, and manually
right automatically, and then select the
switch back to the text entry mode of choice.
next character.
Symbol Mode
Refer to the table on next page for the list of
Symbolic mode enables you to enter symbols into
characters assigned on each key.
a text message.
List of characters available:
To scroll through the symbols available, press the
Key Characters in the Order Displayed
All Navigation Key(the volume key on the left
1 . ! ’, - ? @ 1 _
side of the phone). Press the keys corresponding
2 ABC2
to the desired mark, then the phone
3 DEF3
automatically switches back to the text entry
4 GHI4
mode used just prior to selecting Symbols mode.
5 JKL5
6 MNO6
7 PQRS7
8 TUV8
9 WXYZ9
0 0+
(Caps Lock mode)
Shifting a Case
To shift the case of the next character(s) that
you type, press the # key one or more times.
Settings
you must enter the 8-digit password each time
PIN
prevents your private information from being
Using this menu, you can activate use of PIN
accessed by unauthorized person.
you try to access the Private menu. This
(Personal Identification Number) provided by SIM
card and change the PIN code if available.
The following options are available.
Enable PIN/Disable PIN
Off: you are not asked to enter the phone
When the PIN Request feature is enabled, you
password when you switch the phone on.
must enter your PIN each time you switch the
On: you are required to enter the phone
phone on. Consequently, any person who does
password when you switch the phone on.
not have your PIN cannot use your phone
Change Password
without your approval.
The Change Password feature allows you to
If the PIN is disabled, Enable PIN menu is
change your current Private password to a new
displayed and vice versa.
one. You must enter the current password before
you can specify a new one.
Note: Before disabling the PIN Request feature, you
The password is factory set to 00000000. Once
must enter your PIN.
you have entered a new password, you are asked
to confirm it by entering it again.
The following options are available.
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN
This feature allows you to change your current
PIN to a new one, provided that the PIN Request
feature is enabled. You must enter the current
PIN before you can specify a new one.
Once you have entered a new PIN, you are asked
to confirm it by entering it again.
Private Password
Using this menu, you can activate use of the
password for the Private menu and change the
the password.
Password Request
When the Password Request feature is enabled,
Using the Menus
The phone offers a range of functions that allows
List of Menu Functions
The list shows the menu structure available and
indicates the number assigned to each option.
you to tailor the phone to your needs. These
functions are arranged in menus and submenus.
Messages
The menus and submenus can be accessed by
Write
scrolling or using the shortcuts.
Inbox
Accessing a Menu
Functions by Scrolling
Outbox
1. In idle mode, press the Left soft key to access
Call Broadcast
the menu facility. Scroll with the left/right soft
Voice Mail
key to reach the desired main menu. To show the
Phonebook
main menu’s entry, press the 
Search
key.
Add New Entry
2. If the menu contains any submenus:
Speed Dial
for example, you can find the one you want by
Service no.
scrolling with the  or
My Number
 key.
Memory Status
Press the  or Left soft key
Select BoSelect
to enter the submenu.
Call Register
If the menu you have selected contains
Missed Calls
submenus, repeat this step.
Received Calls
3. Scroll menu with the  or
Dialed Calls
 key, press the  key to confirm the chosen menu.
Network Services
Settings
Call Divert
…………………………………………………………………………….
Call waiting
Notes: • You can return the previous menu level by
Call Barring
pressing the right soft key.
Hide ID
• You can exit the menu without changing the
Network Sel.
menu settings by pressing the key.
Applications
……………………………………………………………………………………………
Game
Scheduler
View Day
View Weekly
Make
Delete All
Find
Set up
Reference
Calculator
Information
Tip Calculator
Access Codes
Unit Converter
There are several access codes that are used by
Settings
your phone and its SIM card. These codes help
Clock Set
you protect the phone against unauthorized use.
Alarm Set
Phone Password
Phone Set
The security code can be used to avoid
Languages
unauthorized use of your phone. The security
Display
code 0000 is usually supplied with the phone.
Sound
Change the security code before you start using
Key Backlight
your phone. Keep the new code secret and in a
Auto Redial
safe place, which is separate from the phone.
Auto-Answer
If you key in an incorrect security code five times
Any-key Answer
in succession, the phone will not accept the
Security Set
correct code for the next five minutes.
Factory Reset
PIN code
The PIN (Personal Identification Number) code
protects your SIM card against unauthorized use.
The PIN code is usually supplied with the SIM
card. When the PIN code request is enabled
(Menu 6-6), the code is asked each time the
phone is switched on.
If you key in an incorrect PIN code three times in
succession, key in the PUK code and press
SELECT.
Key in a new PIN code and press SELECT. Key in
the
new code again and press SELECT.
PIN2 code
The PIN2 code, supplied with some SIM cards, is
required to access some functions, such as
charging unit counters. These functions are only
available if supported by your SIM card.
If you key in an incorrect PIN2 code three times
– Slim battery
in succession, key in the PUK2 code and press
– Standard battery
SELECT key in a new PIN2 code and press
– Extended battery
SELECT Key
Precautions When Using
in the new code again and press SELECT.
Batteries
PUK code
• Never use any charger or battery that is
The PUK (Personal Unblocking Key) code is
damaged in any way.
required to change a blocked PIN code. The PUK
• Use the battery only for its intended purpose.
code may be supplied with the SIM card. If not,
• If you use the phone near the network’s base
contact your local service provider for the code.
station, it uses less power; talk and standby
If you key in an incorrect PUK code ten times in
times are greatly affected by the signal strength
succession, the SIM card cannot be used
on the cellular network and the parameters set
anymore. Contact your service provider for a
by the network operator.
new card.
• Battery charging times depend on the
You cannot change the PUK code. If you lose the
remaining battery charge and the type of battery
code, contact your service provider.
and charger used. The battery can be charged
PUK2 code
and discharged hundreds of times, but it will
The PUK2 code, supplied with some SIM cards, is
gradually wear out. When the operation time
required to change a blocked PIN2 code.
(talk time and standby time) is noticeably
If you key in an incorrect PUK2 code ten times in
shorter than normal, it is time to buy a new
succession, you cannot use the functions
battery.
requiring the PIN2 code. Contact your service
• If left unused, a fully charged battery will
provider for a new card.
discharge itself over time.
You cannot change the PUK2 code. If you lose
• Use only approved batteries and recharge your
the code, contact your service provider.
battery only with approved chargers. When a
Barring Password
charger is not in use, disconnect it from the
The 4-digit barring password is required when
power source. Do not leave the battery
you use the Call Barring function. You obtain the
connected to a charger for more than a week,
password from your service provider when you
since overcharging may shorten its life.
subscribe to this function.
• Extreme temperatures will affect the charging
Using the Batteries
capacity of your battery: it may require cooling
Your phone is powered by a rechargeable Li-ion
or warming first.
standard battery.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
The following batteries are also available (ask
as you will reduce the capacity and life-time of
your local dealer for further details):
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
When connecting the phone or any accessory to
battery may temporarily not work, even when the
another device, read its user’s guide for detailed
battery is fully charged. Li-ion batteries are
safety instructions. Do not connect incompatible
particularly affected by temperatures below 0 °C
products.
(32 °F).
As with other mobile radio transmitting
• Do not short-circuit the battery. Accidental
equipment, users are advised that for the
short circuiting can occur when a metallic object
satisfactory operation of the equipment and for
(coin, clip or pen) causes a direct connection
the safety of personnel, it is recommended that
between the + and - terminals of the battery
the equipment should only be used in the normal
(metal strips on the back of the battery), for
operating position (held to your ear with the
example when you carry a spare battery in a
antenna pointing over your shoulder).
pocket or bag. Short-circuiting the terminals may
Electronic Devices
damage the battery or the object causing the
Most modern electronic equipment is shielded
short-circuit.
from radio frequency (RF) signals. However,
• Dispose of used batteries in accordance with
certain electronic equipment may not be shielded
local regulations. Always recycle. Do not dispose
against the RF signals from your mobile phone.
of batteries in a fire.
Pacemakers
• Caution : Risk of explosion if battery is replaced
Pacemaker manufacturers recommend that a
by an incorrect type. Dispose of used batteries
minimum separation of 6 inches (20 cm) be
according to the instructions.
maintained between a hand-held mobile phone
Safety Information
and a pacemaker to avoid potential interference
Traffic Safety
with the pacemaker. These recommendations are
Do not use a hand-held mobile phone while
consistent with the independent research by and
driving a vehicle. If using a hand-held phone,
recommendations of Wireless Technology
park the vehicle before conversing. Always secure
Research.
the phone in its holder, do not place the phone
on the passenger seat or where it can break
Persons with pacemakers:
loose in a collision or sudden stop.
• Should always keep the phone more than 6
The use of an alert device to operate a vehicle’s
inches (20 cm) from their pacemaker when
lights or horn on public roads is not permitted.
the phone is switched on.
Remember, road safety always comes first!
• Should not carry the phone in a breast
Operating Environment
Pocket.
Remember to follow any special regulations in
• Should use the ear opposite the pacemaker
force in any area and always switch off your
to minimize the potential for interference.
phone whenever it is forbidden to use it, or when
• If you have any reason to suspect that
it may cause interference of danger.
interference is taking place, switch off your
phone immediately.
Potentially Explosive
Atmospheres
Switch off your phone when in any area with a
Hearing Aids
potentially explosive atmosphere and obey all
Some digital mobile phones may interfere with
signs and instructions. Sparks in such areas
some hearing aids. In the event of such
could cause an explosion or fire resulting in
interference, you may want to consult your
bodily injury or even death.
service provider.
Users are advised to switch off the phone while
Other Medical Devices
at a refueling point (service station). Users are
Operation of any radio transmitting equipment,
reminded of the need to observe restrictions on
including cellular phones, may interfere with the
the use of radio equipment in fuel depots (fuel
functionality of inadequately protected medical
storage and distribution areas), chemical plants
devices. Consult a physician or the manufacturer
or where blasting operations are in progress.
of the medical device to determine if they are
Areas with a potentially explosive atmosphere
adequately shielded from external RF energy or if
are often but not always clearly marked. They
you have any questions. Switch off your phone
include below deck on boats; chemical transfer
in health care facilities when any regulations
or storage facilities; vehicles using liquefied
posted in these areas instruct you to do so.
petroleum gas (such as propane or butane);
Hospitals or health care facilities may be using
areas where the air contains chemicals or
equipment that could be sensitive to external RF
particles, such as grain, dust or metal powders;
energy.
and any other area where you would normally be
Vehicles
advised to turn off your vehicle engine.
RF signals may affect improperly installed or
Vehicles
inadequately shielded electronic systems in
Only qualified personnel should service the phone,
motor vehicles (for example, electronic fuel
or install the phone in a vehicle. Faulty
injection systems, electronic anti-skid (anti-lock)
installation or service may be dangerous and may
braking systems, electronic speed control
invalidate any warranty which may apply to the
systems, air bag systems).
unit.
Check with the manufacturer or its representative
Check regularly that all mobile phone equipment
regarding your vehicle. You should also consult
on your vehicle is mounted and operating
the manufacturer of any equipment that has been
properly.
added to your vehicle.
Do not store or carry flammable liquids, gases or
Posted Facilities
explosive materials in the same compartment as
Switch your phone off in any facility where
the phone, its parts or accessories.
posted notices so require.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
3. Press the key.
wireless equipment in the area over the air bag
If certain features are in use (keyguard, restrict
or in the air bag deployment area. If in-vehicle
calls, etc.), you may first need to turn those
wireless equipment is improperly installed and
features off before you can make an emergency
the air bag inflates, serious injury could result.
call. Consult this document and your local cellular
Switch off your phone before boarding an aircraft.
service provider.
The use of mobile phones in an aircraft may be
When making an emergency call, remember to
dangerous to the operation of the aircraft, disrupt
give all the necessary information as accurately
the wireless telephone network and may be
as possible.
illegal.
Remember that your phone may be the only
Failure to observe these instructions may lead to
means of communication at the scene of an
the suspension or denial of telephone services to
accident - do not cut off the call until given
the offender, or legal action, or both.
permission to do so.
Emergency Calls
Radio Frequency (RF) Signals
Important!
Your wireless phone is a radio transmitter and
receiver.
This phone, like any mobile phone, operates
using radio signals, wireless and landline
networks as well as user programmed functions
which cannot guarantee connection in all
conditions. Therefore, you should never rely
solely upon any wireless phone for essential
communications (for example, medical
It is designed and manufactured not to exceed
the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of
comprehensive
guidelines
and
establish
permitted level of RF energy for the general
population. The guidelines are based on the
safety standards that were developed by
independent scientific organizations though
periodic and through evaluation of scientific
studies studies.
emergencies).
Remember, to make or receive any calls the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check with
local service providers.
To make an emergency call:
The standards include a substantial safety
margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit
set by the FCC is 1.6W/kg＊.
＊
In the U.S. and Canada, the SAR limit for
mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial
margin of safety to give addition protection for
the public and to account for any variations in
measurements.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary
by location.
SAR tests are conducted using standard
operating positions specified by the FCC with
the phone transmitting at its highest certified
power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of
the phone while operating can be well below
the maximum value. This is because the phone
is designed to operate at multiple power level
so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the
power output of the phone.
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Care and Maintenance
Before a new model phone is available for sale
to the public, it must be tested and certified to
the FCC that it does not exceed the limit
established
by
the
government-adopted
requirement for safe exposure.
Your phone is a product of superior design and
The tests are performed in positions and
locations (e.g., at the ear and worm on the
body) as required by the FCC for each model.
While there may be differences between the
SAR levels of various phones and at various
positions, they all meet the government
requirement.
warranty obligations and allow you to enjoy this
craftsmanship and should be treated with care.
The suggestions below will help you to fulfill any
product for many years. When using your phone,
battery, charger, OR any accessory:
• Keep it and all its parts and accessories out of
small children’s reach.
The
FCC
has
granted
an
Equipment
Authorization for this model phone with all
reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines.
SAR information on this model phone is on file
with the FCC and can be found under the
Display
Grant
section
of
http://fcc.gov/cet/fccid after searching on FCC
ID printed in the label on the phone. FCC
certification information for this model phone is
attached separation paper.
• Keep it dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic
circuits.
• Do not use or store it in dusty, dirty areas as
its moving parts can be damaged.
• Do not store it in hot areas. High temperatures
can shorten the life of electronic devices, damage
For body worn operation, this model phone has
been tested and meets the FCC RF exposure
guidelines when used with a Bellwave-supplied
approved accessory designated for this product
or when used with and accessory that contains
no metal and that positions the handset a
minimum from the body.
batteries, and warp or melt certain plastics.
The minimum distance for this model phone is
written in the FCC certification information
from the body. None compliance with the
above conditions may violate FCC RF exposure
guidelines.
damage the phone’s electronic circuit boards.
• Do not store it in cold areas. When the phone
warms up (to its normal operating temperature),
moisture can form inside the phone, which may
• Do not drop, knock or shake it. Rough handling
can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents,
For more Information concerning exposure to
radio frequency signals, see the following
websites:
or strong detergents to clean it. Wipe it with a
soft cloth slightly dampened in a mild soap and
water solution.
Federal Communications Commission (FCC)
http://www.fcc.gov/rfsafety
• Do not paint it. Paint can clog the device’s
moving parts and prevent proper operation.
Cellular
Telecommunications
Association (CITA)
Industry
http://www.wow-com.com
• Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications of attachments could damage the
U.S. Food and Drug Administration (FDA)
phone and may violate regulations governing
http://www.fda.gov/cdth.consumer
radio devices.
• If the phone, battery, charger, or any accessory
is not working properly, take it to your nearest
Glossary
qualified service facility. The personnel there will
Airtime
assist you, and if necessary, arrange for service.
Actual time spent talking on the wireless phone.
Most carriers bill customers based on how many
minutes of airtime they use each month.
Antenna
A device for transmitting or receiving signals.
The size and shape of antennas is determined,
in part, by the frequency of the signal they
receive. Wireless phones and the base station
must have antennas.
ALS(Alternate Line Service)
ALS provides the capability of associating two
alternate lines with one SIM card. You can make
and receive calls on either line as desired with
this service.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another mobile or fixed
line.
Call Holding
Ability to put one call on standby while answering
or making another call; you can then switch
between the two calls, as required.
Call Waiting
Ability to inform users that they have an
incoming call when engaged on another call.
Conference Calling
Ability to establish a conference call involving
up to five additional parties.
DTMF
(Dual-tone Modulated Frequency ) You send
DTMF signals when you enter numbers by
pressing the digit keys.
Hands-Free
PUK (PIN Unblocking Key)
A feature that permits a driver to use a wireless
Security code used to unlock the phone when
phone without lifting or holding the handset -an
an incorrect PIN has been entered three times
important safety feature for automobiles, tractors
in succession. The eight-digit number is supplied
and most other motorized vehicles.
by the service provider with the SIM card.
GSM (Global System for Mobile
Roaming
Communication)
Use of your phone when you are outside your
International standard for cellular communication,
home area (when traveling for example).
guaranteeing compatibility between the various
SIM (Subscriber Identification Module)
network operators. GSM covers most European
Card containing a chip with all the information
countries and many other parts of the world.
required to operate the phone (network and
LCD
memory information, as well as the subscriber’s
(Liquid Crystal Display) Commonly used to refer
personal data). The SIM card fits into a small slot
to the screen display on the wireless phone.
on the back of the phone and is protected by the
LED
battery.
(Light Emitting Diode) Commonly used to refer
SMS (Short Message Service)
to a small light on the wireless phone or on the
Network service sending and receiving messages
Desktop Charger. The LED lights on the phone
to and from another subscriber without having to
to indicate an incoming call. The lights on the
speak to the correspondent.
charger indicate that battery charging is taking
The message created or received (up to 160
place.
characters long) can be displayed, received,
Line Identification Services
edited or sent.
Service allowing subscribers to view or block
Soft Keys
the telephone numbers of callers.
Keys marked on the phone, the purpose of
Phone’s Password
which:
Security code used to unlock the phone when
• Varies according to the function that you
you have selected the option to lock it
are currently using
automatically each time it switches on.
• Is indicated on the bottom line of the
PIN (Personal Identification Number)
display just above the corresponding key
Security code that protects the phone against
Voice Mail
unauthorised use. The PIN is supplied by the
Computerized answering service that
service provider with the SIM card. It may be a
automatically answers your calls when you are
four to eight-digit number and can be changed,
not available, plays a greeting (optionally in your
as required.
own voice) and records a message.
Wireless
Radio-based Systems that allow transmission of
telephone or data signals through the air without
a physical connection, such as a metal wire
(copper) or fiber optic cable.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 41
Creator                         : UP100 인증용매뉴얼 - Microsoft Word
Create Date                     : 2005:09:29 11:00:05
Title                           : UP100 인증용매뉴얼.doc
Author                          : wooyoung
Producer                        : Acrobat PDFWriter 5.0 Windows NT¿ë

EXIF Metadata provided by EXIF.tools