Belter Health Measurement and Analysis Technology 706W BODY FAT SCALE User Manual EF 706W Manual

Shenzhen Belter Health Measurement and Analysis Technology Co., Ltd. BODY FAT SCALE EF 706W Manual

Manual

Diagnostic scaleeF-706W
BelterWifi
Search "Smart Life" in APP store or google play for install the APP. Follow the instruction of "APP's USER MANUAL for connection or scan following QR code.kg4. Unit shift button, change the unit KG/LB/ST5. 5
male,femaleBirthday
/LEDFatWaterMuscleVisceral in number8. Capacity:5kg-180kgBone
When the scale stays at 0.0kg and no operating on it, it will turn off in 30’s. If the weight on scale is not stable, the scale will turn off in 30’s.After measurement and step off the scale, the scale will turn off automatically, (even when the data is in transferring).After measurement, if the user does not step off, the scale will turn off in 120’s.If the APP send command asking the scale turn off, it will turn off. 10. Power off23
4This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-ence by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu