Belter Health Measurement and Analysis Technology EIVSCB Fat scale User Manual IVSCB manual GB
Shenzhen Belter Health Measurement and Analysis Technology Co., Ltd. Fat scale IVSCB manual GB
IVSCB manual GB
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2815430 |
| Application ID | rqckAFBHtvE3lBuvz8TGtA== |
| Document Description | IVSCB manual GB |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 220.06kB (2750764 bits) |
| Date Submitted | 2015-11-18 00:00:00 |
| Date Available | 2015-11-18 00:00:00 |
| Creation Date | 2015-11-18 13:53:30 |
| Producing Software | GPL Ghostscript 9.0 |
| Document Lastmod | 2015-11-18 13:53:30 |
| Document Title | IVSCB manual GB.pdf |
| Document Creator | PDFCreator Version 1.2.0 |
| Document Author: | ferry-al |
kg
Health Belter
Health Belter
IVSCB
Health Belter
Birthday
male,female
Fat
Water
Muscle
Bone
Visceral in number
7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%
GLJLWDOGHYLFHSXUVXDQWWRSDUWRIWKH)&&UXOHV7KHVHOLPLWVDUHGHVLJQHGWR
SURYLGH UHDVRQDEOH SURWHFWLRQ DJDLQVW KDUPIXO LQWHUIHUHQFH LQ D UHVLGHQWLDO
LQVWDOODWLRQ7KLVHTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\
DQGLIQRWLQVWDOOHGDQGXVHGLQDFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIXO
LQWHUIHUHQFH WR UDGLR FRPPXQLFDWLRQV +RZHYHU WKHUH LV QR JXDUDQWHH WKDW
LQWHUIHUHQFHZLOOQRWRFFXULQDSDUWLFXODULQVWDOODWLRQ
,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQ
ZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHULVHQFRXUDJHG
WRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJPHDVXUHV
ĺ5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
ĺ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
ĺ&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFK
WKHUHFHLYHULVFRQQHFWHG
ĺ&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
7RDVVXUHFRQWLQXHGFRPSOLDQFHDQ\FKDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHG
E\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHUĂżVDXWKRULW\WRRSHUDWH
WKLVHTXLSPHQW
Radiation Exposure Statement
7KLV HTXLSPHQW FRPSOLHV ZLWK )&& UDGLDWLRQ H[SRVXUH OLPLWV VHW IRUWK IRU DQ
XQFRQWUROOHGHQYLURQPHQWDQGLWDOVRFRPSOLHVZLWK3DUWRI)&&5)5XOHV
CAUTION
7RFRPSO\ZLWKWKHOLPLWVRIWKH&ODVV%GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH
)&&5XOHVWKLVGHYLFHLVFRPSO\ZLWK&ODVV%OLPLWV$OOSHULSKHUDOVPXVWEHVKLHOGHG
DQGJURXQGHG2SHUDWLRQZLWKQRQFHUWLILHGSHULSKHUDOVRUQRQVKLHOGHGFDEOHVPD\
UHVXOWVLQLQWHUIHUHQFHWRUDGLRRUUHFHSWLRQ
MODIFICATION
$Q\FKDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHJUDQWHHRIWKLVGHYLFH
FRXOGYRLGWKHXVHUĂżVDXWKRULW\WRRSHUDWHWKHGHYLFH
Annex of Report
Manufacturerâs Declaration of the EUT
(altogether 5 pages)
Guidance and manufacturerâs declaration â electromagnetic emission â
for all EQUIPMENT AND SYSTEMS
Guidance and manufacturerâs declaration â electromagnetic emission
The SF-371 body fat scale is intended for use in the electromagnetic environment specified below. The
customer or the user of SF-371 body fat scale should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
Group 1
The SF-371 body fat scale uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
RF emissions
Class B
CISPR 11
Harmonic emissions
N/A
The SF-371 body fat scale is suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low-voltage power supply netw
ork
that supplies buildings used for domestic purposes.
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
N/A
IEC 61000-3-3
Guidance and manufacturer's declaration â electromagnetic immunity â
for all EQUIPMENT and SYSTEMS
Guidance and manufacturerâs declaration â electromagnetic immunity
The SF-371 body fat scale is intended for use in the electromagnetic environment specified below. The customer
or the user of the SF-371 body fat scale should assure that it is used in such an environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrostatic
transient / burst
IEC 60601
test level
Compliance level
Âą 6 kV contact
Âą 6 kV contact
Âą 8 kV air
Âą 8 kV air
Âą 2 kV for power
supply lines
1$
IEC 61000-4-4
Âą 1 kV for input/output
lines
Surge
Âą 1 kV differential
mode
IEC 61000-4-5
1$
Âą 2 kV common mode
< 5 % UT
(>95 % dip in UT )
for 0.5 cycle
Voltage
dips,
40 % UT
short
(60 % dip in UT )
interruptions and
for 5 cycles
voltage variations
on power supply
70 % UT
input lines
(30 % dip in UT )
for 25 cycles
IEC 61000-4-11
1$
< 5 % UT
(>95 % dip in UT )
for 5 sec
Power frequency
(50/60 Hz)
magnetic field
3 A/m
3 A/m
Electromagnetic environment guidance
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative
humidity
should be at least 30 %.
Mains power quality should be that of
typical commercial or hospital
environment.
Mains power quality should be that of
typical commercial or hospital
environment.
Mains power quality should be that of
typical commercial or hospital
environment. If the user of the
SF-371 body fat scale
requires
continued operation during power
mains
interruptions,
it
is
recommended that the SF-371 body
fat scale
be powered from an
uninterruptible power supply or a
battery.
Power frequency magnetic fields
should be at levels characteristic of a
typical location in a typical
commercial or hospital environment.
IEC 61000-4-8
NOTE
UT is the a. c. mains voltage prior to application of the test level.
Guidance and manufacturerâs declaration â electromagnetic immunity â
for EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING
Guidance and manufacturerâs declaration â electromagnetic immunity
The SF-371 body fat scale is intended for use in the electromagnetic environment specified below. The customer or
the user of the SF-371 body fat scale should assure that it is used in such an environment.
Immunity test
IEC 60601 test
level
Compliance level
Electromagnetic environment - guidance
Portable and mobile RF communications equipment
should be used no closer to any part of the SF-371 body
fat scale , including cables, than the recommended
separation
distance
calculated
from
the
equation
applicable to the frequency of the transmitter.
Recommended separation distance
Conducted RF
3 Vrms
IEC 61000-4-6
150 kHz to 80 MHz
Radiated RF
3.5
] P
V1
3.5
] P
E1
] P
E1
1$
3 V/m
80 MHz to 800 MHz
800 MHz to 2.5 GHz
3 V/m
IEC 61000-4-3
80 MHz to 2.5 GHz
where p is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and d is the recommended separation
distance in metres (m).b
Field strengths from fixed RF transmitters, as determined
by an electromagnetic site survey,a should be less than the
compliance level in each frequency range.b
Interference may occur in the vicinity of equipment
marked with the following symbol:
NOTE 1
At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic is affected by absorption and reflection from structures,
objects and people.
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios,
amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field
strength in the location in which the SF-371 body fat scale
SF-371 body fat scale
is used exceeds the applicable RF compliance level above, the
should be observed to verify normal operation. If abnormal performance is observed, additional measures
may be necessary, such as reorienting or relocating the SF-371 body fat scale
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.
Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between
portable and mobile RF communications equipment and the SF-371 body fat scale
The SF-371 body fat scale
is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the SF-371 body fat scale
can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the SF-371 body
fat scale
as recommended below, according to the maximum output power of the communications equipment
Separation distance according to frequency of transmitter
Rated maximum
output of
transmitter
150 kHz to 80 MHz
3.5
] P
V1
80 MHz to 800 MHz
3.5
] P
E1
800 MHz to 2.5 GHz
] P
E1
0.01
0.12
0.23
0.1
0.38
0.73
1.2
2.3
10
3.8
7.3
100
12
23
For transmitters rated at a maximum output power not listed above the recommended separation distance d in metres
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 17 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 5b337b54-9057-11e5-0000-487737fd5681 Producer : GPL Ghostscript 9.0 Keywords : () Modify Date : 2015:11:18 13:53:30+00:00 Create Date : 2015:11:18 13:53:30+00:00 Creator Tool : PDFCreator Version 1.2.0 Document ID : 5b337b54-9057-11e5-0000-487737fd5681 Format : application/pdf Title : IVSCB manual GB.pdf Creator : ferry-al Description : () Author : ferry-al Subject :EXIF Metadata provided by EXIF.tools