BenQ Mobile and OHG C75 GSM 900/1800/1900 Mobile Phone User Manual Aries

Download:
Mirror Download [FCC.gov]
Document ID	557276
Application ID	PoYNOzQprfjo4ifn5bmYrA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	159.39kB (1992325 bits)
Date Submitted	2005-06-30 00:00:00
Date Available	2005-06-29 00:00:00
Creation Date	2005-06-09 08:15:55
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-06-09 08:15:55
Document Title	Aries.book
Document Creator	FrameMaker 7.0
Document Author:	Thomas Euchner

right page (1) of C75 FCC, us-en FUG am, (09.06.2005, 09:17)
Legal notices .............................. 3
Safety precautions ..................... 5
Antenna care ........................... 6
Phone operation ...................... 6
Electronic devices .................... 7
Overview of phone .................. 11
Display symbols ....................... 13
Getting started ......................... 15
Inserting the SIM card/
battery ................................... 15
See also InCharging the battery .............. 16
dex at the end
Switching
on/off/
of this User
entering PIN ............................. 18
Guide
Enter PIN ............................... 18
Emergency number (SOS) ...... 18
General instructions ................ 19
Standard functions .................. 21
Highlighting mode ................. 22
Menu speed dialling ............... 22
Security .................................... 23
PIN code ................................ 23
Text entry ................................. 25
Calling ...................................... 29
Tone sequences (DTMF) ......... 34
My phone ................................. 35
Default book ............................ 36
Address book ........................... 37
New entry .............................. 37
Change entry ......................... 39
Dialling an entry .................... 39
Groups ................................... 40
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_IVZ.fm
Table of
Contents
Phonebook ............................... 41
New entry .............................. 41
Call (search for an entry) ........ 42
Change entry ......................... 42
 ..................... 43
Call records ............................... 44
Dur./charges ............................. 45
Camera ..................................... 46
Photo mode ........................... 46
Video mode ............................ 47
Main Inbox ............................... 48
SMS ........................................... 49
Write/send .............................. 49
Read ....................................... 51
Setting ................................... 53
MMS ......................................... 55
Create .................................... 55
Templates .............................. 57
Sending an MMS .................... 58
Receiving an MMS .................. 59
Reading an MMS .................... 60
Setting ................................... 61
E-mail ........................................ 63
Write ...................................... 63
Receive/read ........................... 64
Setting ................................... 65
Chat room ................................. 67
Start menu ............................. 67
Login ..................................... 68
Contact lists ........................... 68
Start chat ............................... 71
Msg. history ........................... 72
Setting ................................... 72
See also Index at the end of this User Guide
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Table of Contents
left page (2) of C75 FCC, us-en FUG am, (09.06.2005, 09:17)
Table of Contents
Voice message/mailbox ........... 74
CB services ............................... 75
Surf & fun ................................. 76
Internet ................................ 76
Bookmarks ............................. 78
Games and Applications ......... 79
Download wiz. ....................... 79
Settings .................................... 81
Profiles .................................. 81
Topics .................................... 83
Display ................................... 84
Ring tones ............................. 86
Call setup ............................... 89
Phone setup ........................... 91
Clock ..................................... 93
Connectivity .......................... 94
Security ................................. 97
Network ................................ 99
Accessories .......................... 101
My menu ................................ 102
Fast access key ....................... 103
Speed keys ........................... 104
Organizer ............................... 105
Calendar .............................. 105
Appointments ...................... 106
Tasks ................................... 108
Notes ................................... 108
Missed appts. ....................... 108
Dictat.machine .................... 109
Time zones .......................... 110
Extras ...................................... 111
SIM services (optional) ......... 111
Alarm clock .......................... 111
Sound recorder ..................... 112
Calculator ............................. 112
Unit converter ...................... 113
Stopwatch ............................ 115
Countdown .......................... 115
Remote synchronisation ....... 116
Device manag. ..................... 117
Media player ........................... 119
My stuff .................................. 120
Mobile Phone Manager .......... 122
Questions & Answers ............. 125
Customer Care ........................ 129
Care and maintenance ........... 131
Product data ........................... 132
SAR (C75) ................................ 133
Accessories ............................. 135
Quality .................................... 137
U.S. FDA .................................. 138
FCC/Industry
Canada Notice ........................ 144
Ten Driving Safety Tips ........... 145
Intellectual property .............. 147
End user
license agreement .................. 148
Menu tree ............................... 152
Index ....................................... 158
See also Index at the end of this User Guide
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_IVZ.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Legal notices
Legal notices
The mobile phone described in this guide is approved for use on the GSM and
GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS)
bands. It is approved for use in the country where it was originally sold and
may be approved for use in other countries.
© 2005 Siemens Information and Communication Mobile, LLC.
All rights reserved.
Siemens and the C75 model phone
are trademarks or registered trademarks of Siemens AG and/or its affiliates in the United States and/or other
countries.
T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trademarks and
logos are trademarks or registered
trademarks of Sun Microsystems, Inc.
in the U.S and other countries. The
names of actual companies and products mentioned herein may be the
trademarks of their respective owners.
Disclaimer
The information contained in the User
Guide is written for the C75 phone. Siemens reserves the right to make
changes and improvements to the
products and any of the features of the
products described in this document
without prior notice. The contents of
the user guide are provided "AS IS". Except as required by applicable law, no
warranties of any kind, either express
or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular
purpose, are made in relation to the
accuracy, reliability or contents of this
document. Siemens reserves the right
to revise the user guide or withdraw it
at any time without prior notice. Under no circumstances shall Siemens be
responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
Export Information
The mobile phone may be subject to
export regulation of the United States
and other countries. Diversion contrary to law is prohibited. You must
comply with all applicable export laws,
restrictions and regulations of the
United States foreign agencies or authorities, and may not export, or transfer for the purpose of re-export, the
mobile phone or any part of the phone
in violation of any applicable restrictions, laws or regulations, or without
all necessary approvals.
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_LegalNotices.fm
right page (3) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
Legal notices
Network Services
A number of features included in this
guide are called Network Services.
They are special services provided by
wireless service providers. In order
to use any of these Network Services, you must subscribe to these service(s) from your service provider
and obtain instructions for their use.
Some of these Network Services may
not be available when roaming on a
network other than your home
network.
Standby and
Talk Time Information
The mobile phone incorporates features that are new to the mobile
phone world. These may include color displays and lighting, graphic
games, music reproduction and
browsing the Internet. The way you
use the display and the features will
affect the performance of the battery and how long it lasts between
charge cycles. The quoted standby
times and talk times show the minimum and maximum performance
that can be expected from the battery under normal network conditions and with the default settings as
set by the factory. However, playing
games (particularly with the backlight continuously switched on) and
listening to music will shorten the
time available for standby and to
make and receive telephone calls.
Operation times also vary depending
on network conditions, SIM settings,
charging and battery condition, how
you use your phone and other
factors.
Memory
The mobile phone contains an internal memory device that stores the
software required to operate the
mobile phone, communicate with
the GSM/GPRS network and provide
the user interface. Some features in
the internal memory run additional
devices and some additional games
and utilities. The amount of memory
available in the mobile phone is finite and may be insufficient to store
large numbers of applications and
files.
Warning!
Remember to back up your data and to do
so frequently. Always back up all data and
programs before sending the mobile phone
in for repair.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_LegalNotices.fm
left page (4) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Safety precautions
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal
requirements and local restrictions when using the phone.
For example in aeroplanes,
petrol stations, hospitals or
while driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more information consult your doctor.
The ringtones (p. 88), message
tones (p. 92) and handsfree
(p. 33) talking are reproduced
through the loudspeaker. Do
not hold the phone to your ear
when it rings or when you have
switched on the handsfree
function (p. 33). Otherwise you
risk serious permanent damage to your hearing.
Only use original Siemens batteries (100 % mercury-free)
and – charging devices. Otherwise you risk serious damage
to health and property. The battery could explode, for instance.
Small parts such as the SIM
card, sealing stop, lens ring
and lens cap can be dismantled and swallowed by small
children. The phone must
therefore be stored out of the
reach of small children.
The mains voltage specified on
the power supply unit (V) must
not be exceeded. Otherwise
the charging device may be destroyed.
The power supply must be
plugged into an easily accessible AC mains power socket
when charging the battery. The
only way to turn off the charging device after charging the
battery is to unplug it.
Do not use a handheld while
driving.
Do not use an optical magnifier
to look at the activated infrared
interface [Class 1 LED product
(classification as per
IEC 60825-1)].
Do not place the phone near to
electromagnetic data carriers
such as credit cards and floppy
disks. Information stored on
them could be lost.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FCC_SecurityInfo.fm
right page (5) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Safety precautions
You may only open the phone
to replace the battery (100 %
mercury-free) or SIM card. You
must not open the battery under any circumstances. All other changes to this device are
strictly prohibited and will invalidate the guarantee.
Important
Read this information before using
your wireless handheld phone.
Please dispose of unwanted
batteries and phones as permitted by the laws in your
country.
Antenna care
As this mobile phone is equipped
with a fixed (non-retractable) antenna, some paragraphs in the text
below may not be applicable.
Important:
The phone may cause interference in the vicinity of TV sets,
radios and PCs.
Use only Siemens original accessories. This will avoid potential risks to health or
property and ensure compliance with all relevant
regulations.
Improper use will invalidate the guarantee!
These safety instructions also apply to
Siemens original accessories.
Product attributes are subject to changes in
technology, design and availability.
Siemens reserves the right to modify products without prior notice.
As mobile devices offer a range of functions, they can be used in positions other
than the head, such as on the body. In this
case, at data transfer (GPRS) a separation
distance of 1.5 cm/0.59 inch is required.
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and
may violate FCC regulations.
Phone operation
Normal position
Hold the phone as you would any
other telephone with the antenna
pointed up and over your shoulder.
Tips on efficient operation
For your phone to operate most
efficiently:
• Extend your antenna fully
(if applicable).
• Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects
call quality and may cause the
phone to operate at a higher power level than otherwise needed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FCC_SecurityInfo.fm
left page (6) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Safety precautions
Driving
Laws pertaining to the use of mobile
phones while driving vary significantly
from state to state and sometimes
even from locality to locality within
states. For example, some areas may
allow persons to use their mobile
phones only if they employ a handsfree device, and some areas may
prohibit the use of cell phones
entirely. Accordingly, Siemens recommends that persons check the laws for
the areas in which they drive or will be
driving. For areas where the use of
mobile phones while driving is permitted, Siemens encourages persons to
use their phones responsibly and to
employ hands-free devices. Also, if using your phone while driving, please:
• Give full attention to driving –
driving safely is your first
responsibility;
• Use hands-free operation, if
available;
• Pull off the road and park before
making or answering a call, if
driving conditions so require.
For vehicles equipped with
air bags
An air bag inflates with great force.
DO NOT place objects, including either
installed or portable wireless equipment, in the area over the air bag or in
the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Electronic devices
Most modern electronic equipment
is shielded from radio frequency (RF)
signals. However, certain electronic
equipment may not be shielded
against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers'
Association recommends that a minimum separation of six inches (6")
be maintained between a handheld
wireless phone and a pacemaker to
avoid potential interference with the
pacemaker. These recommendations
are consistent with the independent
research by and recommendations of
Wireless Technology Research.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FCC_SecurityInfo.fm
right page (7) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Safety precautions
Persons with pacemakers
Vehicles
• should ALWAYS keep the phone
more than six inches from their
pacemaker when the phone is
turned ON;
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles.
Check with the manufacturer or its
representative regarding your vehicle. You should also consult the
manufacturer of any equipment that
has been added to your vehicle.
• should not carry the phone in a
breast pocket;
• should use the ear opposite the
pacemaker to minimize the potential for interference;
• should turn the phone OFF immediately if there is any reason to
suspect that interference is taking
place.
Hearing aids
Some digital wireless phones may
interfere with some hearing aids. In
the event of such interference, you
may want to consult your service
provider or your hearing aid manufacturer to discuss alternatives.
Other medical devices
If you use any other personal medical devices, consult the manufacturers of your devices to determine if
they are adequately shielded from
external RF energy. Your physician
may be able to assist you in obtaining this information.
Turn your phone OFF in health care
facilities when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities
may be using equipment that could
be sensitive to external RF energy.
Posted facilities
Turn your phone OFF in any facility
where posted notices so require.
Airplanes
FCC and Airline Regulations prohibit
using your phone while in the air.
Turn your phone OFF when requested by the airline.
Check and comply with the policy of
your airline regarding the use of your
phone while the airplane is on the
ground.
Blasting areas
To avoid interfering with blasting operations, turn your phone OFF when
in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey
all signs and instructions.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FCC_SecurityInfo.fm
left page (8) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Safety precautions
Potentially explosive
atmospheres
Turn your phone OFF when in any
area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in
bodily injury or even death.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include: fueling
areas such as gasoline stations; below deck on boats; fuel or chemical
transfer or storage facilities; vehicles
using liquefied petroleum gas (such
as propane or butane); areas where
the air contains chemicals or particles, such as grain, dust or metal
powders; and any other area where
you would normally be advised to
turn off your vehicle engine.
Emergency calls (SOS)
Your wireless phone can be used
to make emergency calls. You can
make an emergency call from the
main display screen. Enter the local
emergency number such as 911 and
then press the A key.
This phone, like any wireless phone,
operates using radio signals, wireless and landline networks, and userprogrammed functions. Because of
this, connections in all conditions
cannot be guaranteed. Therefore,
you should never rely solely on any
wireless phone for essential communications (for example, medical
emergencies). Remember – to make
or receive any calls, the phone must
be switched on and be used in a service area that has adequate signal
strength. Emergency calls might not
be possible on all wireless phone
networks or when certain network
services or phone features are in use.
Check with local service providers regarding their network features.
Always make certain that your
phone is properly charged before
attempting any emergency calls. If
you allow your battery to discharge,
you will be unable to receive or make
calls, including emergency calls. You
must then wait a few minutes after
the charging begins to place any
emergency calls.
When making an emergency call,
remember to give all of the necessary information as accurately as
possible. Remember that your wireless phone might be the only means
of communication at the scene of an
accident, therefore you should not
terminate the call until given permission to do so.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FCC_SecurityInfo.fm
right page (9) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
10
Safety precautions
Batteries and Chargers
Only use original Siemens batteries
(100% mercury-free) and charging
devices. Use of non-Siemens batteries and/or charging devices may
cause explosion resulting in serious
injury and/or property damage. Use
original Siemens accessories in order
to avoid possible injury and property
damage and to ensure compliance
with applicable laws and regulations. Improper use invalidates the
warranty.
Battery safety precautions
To reduce the risk of fire, injury or
electric shock, and to properly dispose of batteries, please read and
understand the following instructions. CONTAINS LITHIUM-ION OR
NICKEL-METAL HYDRIDE BATTERY.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE IN MUNICIPAL WASTE.
1. Only use the batteries specified
for use with this mobile phone.
2. Do not use batteries of different
sizes or from different manufacturers in this mobile phone.
3. Do not dispose of the battery in a
fire; it may explode. Dispose of
used batteries and phones in
accordance with applicable laws
and safety regulations. Do not
expose battery to water. Check
with local codes for special disposal instructions.
4. Do not open or mutilate the battery. Doing so may cause damage
to the eyes or skin.
5. Exercise care in handling the battery in order not to short the battery with conducting materials
such as rings, bracelets, and keys.
The battery or conducting material may overheat and cause burns
or fire.
6. Charge the battery provided with,
or identified for use with, this
product only in accordance with
the instructions and limitations
specified in the User's Guide. Do
not attempt to charge the battery
by any means other than those
specified in the User's Guide.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FCC_SecurityInfo.fm
left page (10) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
right page (11) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Overview.fm
Overview of phone
1 Joystick
Press the joystick down vertically
to start an application or function
(page 20).
In standby mode:
Open main menu.
Open user profiles.
Open Phonebook/Address book.
Main Inbox open
Start the camera.
In lists, messages and menus:
Scroll up and down.
Back one level.
During a call:
Set volume.
Call options.
A Call key
Dial phone number/name displayed/
highlighted, take calls. Show last phone
numbers dialled in standby mode.
B On/Off/End key
• Switched off: Press and hold to
switch on.
• During a conversation or in an application: press briefly to finish.
• In menus: Press briefly to go back
a level. Press and hold to go back to
standby mode.
• In standby mode: Press and hold to
switch off phone.
£
Service provider
01.10.2005
10:10
NewMMS í Ï
11
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Overview of phone
left page (12) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Overview of phone
1 Integrated antenna
Do not obstruct the phone above the
battery cover unnecessarily. This reduces the signal quality.
Loudspeaker
Display
Infrared interface
Softkeys
The current functions of this key are
shown in the bottom line of the display
as §Text§/symbol (e.g. p).
# Key lock
Press and hold in standby mode:
Switch key lock on/off.
* Ringtone
• Press and hold in standby mode:
Switch all audible signals on/off
(except alarm).
• Press and hold on incoming call:
Switch off ringtone for this call only.
Connection socket
For charger, headset, flash, etc.
Car kit holder
Connection for external antenna
Camera lens
£
Service provider
01.10.2005
10:10
NewMMS í Ï
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Overview.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
12
Display symbols
Display symbols
Display symbols (selection)
Ç
¿
¾
¼
¹
Ä
Å
T9Abc
Signal strength
Charging
Battery charge level, e.g. 50 %
Phonebook/Address book
Call records
Surf & fun
Service provider portal
Organizer
Messages
Camera
Extras
My stuff
Settings
All calls are diverted
Ringing tone off
Short ring (beep) only
Ringetone only if the caller is
stored in the Phonebook
Alarm set
Keypad locked
Auto answer feature on
Text input with T9
£
¢
¤
±
²
³
´
¯
®
Activated and available
Registered
Temporarily interrupted
Browser offline
Browser connecting
Browser via GPRS online
Browser no network
Infrared activated
Infrared transmission
Events (selection)
ã
ä
å
Æ
Â
Ê
SIM card memory full
MMS memory full
Phone memory full
No network access
Missed call
Memory assistant
13
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Displaysymbols.fm
right page (13) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
14
Display symbols
Message symbols (selection)
Camera symbols
Unread
Ñ/Ò
Switches between
photo and video
Read
Draft
Sent
MMS not sent
Û
White balance
MMS received
×
Flash connected
MMS read
MMS with DRM contents
(page 19)
E-mail forwarded
E-mail with attachment
À
Voice mail received
Ù Brightness
Ú Zoom factor
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Displaysymbols.fm
left page (14) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
right page (15) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Getting started
Inserting the
SIM card/battery
• Place the SIM card in front of the
slot with the contact surface facing downwards. Then press the
SIM card slightly to push it in 3
(ensure that the chamfered corner
is in the correct position).
The service provider supplies you
with a SIM card on which all the important data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
Additional information
Please switch off your phone before removing the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if you have an
older card.
SIM card problems .....................page 126
• Press and hold down the catch 1,
then push cover towards the front
in the direction indicated by the
arrow 2.
15
• Insert the battery sideways into
the phone 4, then press it downwards 5 until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Getting started
left page (16) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
Getting started
• Place the battery cover, then push
it towards the front 6, until it
clicks into place.
Charging the battery
Charging the battery
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a mains power socket and charge for at least
two hours.
As an alternative, the battery can be
charged via the USB port (see
Accessories, page 135).
Charging time
An empty battery is fully charged after about 2 hours. Charging is only
possible within a temperature range
of +5 °C to 45 °C (+41°F to +113°F).
If the temperature rises/falls
5°C above/below this, i.e drops to
32°F or rises to 122°F, the charge
symbol flashes a warning.The mains
voltage specified on the power supply unit must not be exceeded.
Operating time
The operating time depends upon
the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Call time: 100 to 330 minutes
Stand-by time: 60 to 300 hours
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immediately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply included in delivery!
Display during charging.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
16
right page (17) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Display while in service
Charge level display during operation (empty–full):
VWX
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly after an uninterrupted charging/discharging cycle. You should therefore
not remove the battery unnecessarily
and where possible not finish the
charging process prematurely.
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.
17
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Getting started
left page (18) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
Switching on/off/entering PIN
Switching on/off/entering PIN
Switching phone on
and off
Press and hold the
On/Off/End key.
Enter PIN
The SIM card can be protected with
a 4 to 8-digit PIN.
§OK§
Enter the PIN using the
number keys. The characters **** appear to ensure nobody can read
your PIN on the display.
Correction with ].
Confirm. Logging on to
the network will take
a few seconds.
Additional information
Change PIN..................................page 23
Clear SIM card barring .................page 24
Switching on your phone
for the first time
Time/date
During commissioning, set the clock
so that it displays the correct time.
You will not have to make this setting again.
Press this key, then select
§Change§.
First enter the date
(day/month/year), then
the time (24 hours, including seconds).
Press this key. The time
and date are updated.
Time zones
Set the time zone you
are in.
Select a city in the desired
time zone.
§Options§
Use Set time zone to save.
Emergency number
(SOS)
Copying SIM addresses
Only to be used in real emergencies!
By pressing the softkey §SOS§ you can
make an emergency call on any network without a SIM card and without
entering a PIN (not available in all
countries).
The first time the SIM card is inserted, the entries on it can be copied to
the Addressbook. Please do not interrupt this procedure. During this time,
do not accept incoming calls. Follow
the instructions in the display.
You can also copy data from the
SIM card at a later time (page 42).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
18
right page (19) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
19
General instructions
Standby mode
Main menu
The phone is in standby mode and is
ready for use when the name of the
service provider appears on the
display.
The main menu is displayed graphically with symbols:
Press and hold the
On/Off/End key to return
to standby mode from
any situation.
Signal strength
Strong signal strength.
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
Digital Rights Mgmt.
(DRM)
Remember that your telephone has
digital rights management. The use
of downloaded pictures, sounds or
applications can be restricted by the
suppliers, e.g. copy protection, use
for a limited period of time only,
number of times it can be used etc.
(see also page 80).
FI
Call up from standby
mode.
Select the application
symbols.
Start an application.
Main menu options
§Options§
Open menu.
Different functions are available depending on the context:
Large letters
Selection between two
font sizes.
Illumination
Set display light
brighter/darker.
Search
List output of the menu.
Entering letters will access a function directly.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
General instructions
left page (20) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
General instructions
User guide
Symbols
Menu controls
The following symbols are used to
explain operation:
The steps needed to reach a function
are shown in a condensed form in the
user guide, e. g. to display call list for
missed calls in condensed form:
C ¢P ¢Missed calls
This comprises the following steps:
Enter numbers or letters.
On/Off/End key.
Call key
Softkeys
Open the main menu.
§Menu§
Displays a soft-key function.
Select P, then select
function Missed calls.
Press the joystick vertically,
e.g., to call up the menu.
Confirm.
DFE
H I G
Press the joystick in the direction indicated.
Function dependent on service provider, may require
special registration.
Press joystick
The symbol in the centre of the lower line of the display shows the current function when the joystick is
pressed down vertically, e.g.:
í
î
ï
ð
ì
Display menu
Take photos
Zoom
Call, accept call
OK
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
20
right page (21) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
21
Standard functions
Option menus
Functions which appear repeatedly
in the options menu are listed here.
§Options§
Open menu.
Edit
Open the entry to edit.
View
Display entry.
Delete/
Delete all
Delete entry/delete all entries after confirmation.
New entry
Create new entry.
Send...
Select transmission service
and medium for sending or
printing.
Reply/
Reply to all
The sender becomes the
recipient, "Re." is placed in
front of the subject matter
and the received text is
transferred into the new
message.
Save
Store entry.
Save to 9
Save recipients in the current address directory.
Sort
Set sort criteria (alphabetical, type, time).
Text input
(page 25)
T9 preferred: Activate/deactivate T9 input.
Input language: Select
language for text.
Rename
Rename selected entry.
Capacity
Display memory capacity.
Properties
Display properties of the
highlighted object.
Help
Display help text.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Standard functions
left page (22) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
Standard functions
Highlighting mode
Menu speed dialling
With some applications (e.g. Phonebook/Addressbook) one or more entries in a list can be highlighted to
carry out a function jointly.
All menu functions are numbered internally. A function may be selected
directly by entering these numbers
in sequence.
§Options§
E.g., write new SMS (from standby
mode):
Mark
Open menu.
Activate highlighting
mode.
Press this key to display
the main menu.
Highlight or delete highlighting.
Press this key for
Messages.
§Mark§
The current entry is highlighted.
Press this key to
Write message.
§Unmark§
Unhighlight the current
entry.
Press this key for SMS.
Select entry/entries.
Additional highlighting functions:
§Options§
Mark all
Open menu.
Highlight all entries.
Deselect all Delete highlighting on all
marked entries.
Delete
marked
All selected entries are
deleted.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
22
right page (23) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
23
Security
The phone and SIM card are protected against misuse by several security
codes.
T¢Security
C¢
¢PIN code
Keep these confidential numbers in
a safe place where you can access
them again if required.
PIN control
PIN code
PIN
Protects your SIM card (personal identification number).
PIN2
This is needed to set the charge
detail display and to access
additional functions on special
SIM cards.
PUK
PUK2
Key code. Used to unlock
SIM cards after the wrong PIN
has been entered repeatedly.
Phone
code
Protects your phone. Must be
entered at the first security
setting.
¢Select function.
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not permit deactivating the control.
§Change§
Press.
Enter PIN.
Confirm input.
Change PIN
You can change the PIN to any
4 to 8-digit number you find easier
to remember.
§Selection§ Press.
Enter current PIN.
Confirm input.
J , C Enter new PIN.
J , C Re-enter new PIN.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Security
left page (24) of C75 FCC, us-en FUG am, (09.06.2005, 09:11)
Security
T¢Security
C¢
¢PIN code
Preventing accidental
activation
Change PIN2
Even if PIN use is deactivated
(page 23) confirmation is required
to switch on the phone.
¢Select function.
(Display only if PIN2 is available).
Proceed as with Change PIN.
Chg.phonecode
(Change phone code)
You define the phone code
(4 - 8 digits) when you call up a
phone-code protected function for
the first time (e.g. Direct call,
page 33). It is then valid for all
phone-code protected functions.
Following the third unsuccessful attempt, access to the phone code and
the functions that use it is denied.
Contact the Siemens Service
(page 129).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the
SIM card in accordance with the instructions. If the PUK (MASTER PIN)
has been lost, please contact your
service provider.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
Press and hold.
§OK§
Press. The phone
switches on.
§Cancel§
Press or take no action.
The phone does not
switch on.
Connecting to PCs
You can connect your phone using
Infrared or a data cable (accessories,
page 135) to a PC. The PC program
MPM (Mobile Phone Manager,
page 122) enables you to backup data on your PC and to synchronise the
Addressbook with Outlook®, Lotus
Notes™ and other Siemens phones
(as well as Gigaset). You can download the Mobile Phone Manager
from the Internet at
www.siemens.com/c75
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Startup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
24
right page (25) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
25
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Text.fm
Text entry
Text entry without T9
Press number key repeatedly until
the required letter appears. After a
brief interval the cursor will advance.
Example:
Ä, ä, 1–9
Press briefly: Special characters are shown.
Press and hold: Open input
menu.
Press once/repeatedly:
.,?!’"0+-()@/:_
Press once briefly to type
the letter a, twice to type
b etc.
Press and hold: Writes 0.
Writes blank. Press twice
= jumps a line.
Press and hold to write the
number.
Umlauts and numbers are
displayed after the relevant letters.
Special characters
Press briefly to delete the
letter before the cursor,
press and hold to erase the
whole word.
Move the cursor
(forwards/backwards).
Press briefly: Swap between abc, Abc, T9abc,
T9Abc, 123. Status shown
in top line of display.
Press and hold: All inputvariants are displayed.
Press briefly. The symbols
chart is displayed
1)
¿ ¡
+ -
_ ;
’
¤ ¥ $ £ € @ \
^ `
? !
& #
% ~ < = >
§ Γ ∆ Θ Λ Ξ
Π Σ Φ Ψ Ω
1) Line break
I, F
Navigate to characters.
§Selection§ Confirm.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Text entry
left page (26) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Text entry
Input menu
Writing with T9
With text input:
Since the display changes as you
proceed,
Press down: The input
menu is displayed:
Text format (SMS only)
Input language
Mark
it is best if you finish a word without looking at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
Copy/Insert
Text entry with T9
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive dictionary.
Activate, deactivate T9
§Options§
Open text menu.
T9 input
Select.
§Change§
Activate T9.
Select input language
Select the language in which you
want to compose your message.
§Options§
Open text menu.
Input language
Select.
Select language.
§Selection§ Confirm, the new language is set. Languages
with T9 support are
marked with the
T9 symbol.
Press briefly for T9Abc then
46835
A blank ends a word.
Do not use special characters such as
Ä but rather use the standard characters, e.g. A; T9 will do the rest for you.
T9® Text Input is licensed under one or more of
the following:
U.S. Pat. Nos. 5,187,480, 5,818,437, 5,945,928,
5,953,541, 6,011,554, 6,286,064, 6,307,548,
6,307,549, and 6,636,162, 6,646,573;
Australian Pat. Nos. 727539, 746674, and
747901;
Canadian Pat. Nos. 1,331,057, 2,302,595, and
2,227,904;
Japan Pat. No. 3532780, 3492981;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK1010924;
Republic of Singapore Pat. No. 51383, 66959,
and 71979;
European Pat. Nos. 0 842 463 (96927260.8),
1 010 057 (98903671.0), 1 018 069
(98950708.2); Republic of Korea Pat. Nos.
KR201211B1 and KR226206B1.
People’s Republic of China Pat. Application Nos.
98802801.8, 98809472.X and 96196739.0;
Mexico Pat. No. 208141;
Russian Federation Pat. No. 2206118; and additional patents are pending worldwide.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Text.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
26
right page (27) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Text.fm
T9 word suggestions
If several options are found in the
dictionary for a key sequence
(a word), the most probable is displayed first. If the word you want has
not been recognised, the next suggestion from T9 may be correct.
The word must §highlighted§ be displayed. Then press
again. The displayed word
is replaced with a different word. If this word is also incorrect, press
again. press until the correct word is displayed.
If the word you want is not in the dictionary, it can also be written without T9.
To add a word to the dictionary:
§Learn§
Select.
The last suggestion is deleted and
the word may now be entered without T9 support. Press §Save§ to add it
automatically to the dictionary.
Correct a word
Move left or right, word
by word, until the required word is
§highlighted§.
Scroll through the T9
word suggestions again.
Deletes the character to
the left of the cursor and
displays a new possible
word!
27
Additional information
Within a "T9-word", individual letters may
not be edited without first removing the
T9-status. In most cases it is better to rewrite the complete word.
Set a full stop. The word is
concluded if it is followed by
a space. Within a word, a full
stop represents an apostrophe or hyphen:
e.g. §provider.s§ = provider’s.
Moving the cursor to the right
ends the word.
Press briefly: Switch between: abc, Abc, T9abc,
T9Abc, 123. Status shown in
top line of display.
Press and hold: All input
modes are displayed.
Press briefly: Select special
characters (page 25).
Press and hold: Open input
menu (page 26).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Text entry
left page (28) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Text entry
Text modules
Use text modules
Text modules can be stored in the
phone for adding to your messages
(SMS, MMS, e-mail).
Write message
(SMS, MMS, e-mail).
§Options§
Open text menu.
Write text modules
Insert from
¢M¢Text modules

Select.
§Options§
Write text.
Save.
Select Text module.
Select text module from
the list.
Confirm. The text module
is displayed.
Confirm. The text module
is inserted in the message
to the right of the cursor.
The input field is opened.
Open menu and select
Save. Accept the specified
name or allocate a new
one.
Select.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Text.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
28
right page (29) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phone.fm
29
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
Enter the number (always
with prefix/international
dialling code).
] A short press clears
the last digit, a long press
clears the entire phone
number.
Press the Call key. The displayed phone number is
dialled.
End call
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
Regulate the volume
(only possible during
a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial previous numbers
To redial the phone number last
called:
Press the Call key twice.
To redial other numbers that were
dialled previously:
Press the Call key once.
Pick out the phone number from the list.
Press this key to select the
phone number.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Calling
left page (30) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Calling
If the number is busy
Reminder
If the called number is busy or cannot be reached because of network
problems several options are available (depending on the service provider). An incoming call or any other
use of the phone interrupts these
functions.
§Prompt§
Either
Auto redial
§Auto dial§ The phone number is automatically dialled ten
times at increasing time
intervals. End with:
B End key.
Or
Call back
§Call back§ Your phone rings when
the busy number is free.
Press the Call key to dial
the number.
A beep reminds you to redial the displayed phone
number after 15 minutes.
Additional information
Store phone number in the
Ð
Addressbook/Phonebook.
§Handsfr.§ Handsfree switch on (playback from loudspeaker).
Always switch off "handsfree
talking" before holding the
phone to your ear! Otherwise,
you might damage your
hearing!
Press and hold to switch microphone off.
International dialling codes
Press and hold until a "+" is
displayed.
§Country§ Press and select country.
Phone number memo
You can enter a phone number during the
call. The person to whom you are speaking
can hear these entries. When the connection has ended you can save or dial the
phone number.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phone.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
30
right page (31) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phone.fm
31
Accept call
Handsfree
The phone must be switched on. An
incoming call will interrupt any other
use of the phone.
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
Press.
§Handsfr.§ Activate handsfree
talking.
Press.
Or
A phone number and the name of
the caller transmitted by the network will be displayed if the number
is saved in the Phonebook/Addressbook. A picture of the caller may also
be displayed (p. 38).
Reject call
§Reject§
§Handsfr.§ Deactivate.
Warning!
Always switch off "handsfree talking" before holding the phone to your ear! Otherwise, you will damage your hearing!
Swapping between
2 calls
Press briefly.
Establish a second connection
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Additional information
and hold to switch off
* Press
the ringing tone and vibration.
Missed call display.
Â
Use the joystick to adjust
the volume.
Press.
Or
Switch on.
You can call another number during
a call.
§Options§
Open call menu.
Hold
The current call is put on
hold.
Now dial the new phone
number or
§Options§, select the Phonebook, Addressbook, or
phone number.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Calling
left page (32) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Calling
When the new connection is
established:
§Toggle§
Swapping between calls.
Incoming calls during a call
You may need to register for this service with your service provider and
set your phone accordingly (p. 89).
During a call, you may be advised
that there is another call waiting. You
will hear a special tone during the
call. You have the following options:
• Accept the waiting call in addition
to the first
§Toggle§
Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap between the two calls.
• Reject the waiting call
§Reject§
§Yes§
You accept the call on hold.
§No§
You end the 2nd call.
Conference
• Accept the waiting call and end the
current call
End the current call.
Accept new call.
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your service provider or may have to be enabled specially.
A connection has already been
established:
§Options§
The waiting call is diverted, for example, to the
mailbox.
Press the End key.
After the Return to held call? display,
you have the following selection:
Press.
Or
§Forward§
Ending call(s)
§Options§
Open menu and select
Hold. The current connection is maintained.
Now dial a new number.
When the new connection is established ...
… open menu and select
Conference. The held call is
joined.
Repeat procedure until all participants are linked together (up to
5 participants).
End
All calls in the multiparty
conversation are ended
when the End key is
pressed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phone.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
32
right page (33) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phone.fm
33
Call options
Direct call
The following functions are only
available during a call:
If this is active, only one number can
be dialled.
§Options§
Open menu.
Hold
Maintain current call.
Microphone
on
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also:
Press and hold *.
Handsfree
Call via the loudspeaker.
Volume
Adjust handset volume.
Switch on
T¢Security
C¢
¢Direct call
Confirm selection.
Enter phone code.
When first prompted you define and
enter the phone code (4 - 8 digits).
Confirm selection.
Default book Phonebook/Addressbook.
Conference
Please do not forget this code (page 23)!
Ï / J Select phone number
from the Phonebook/
Addressbook or enter it.
(p. 32)
Time/charges Display duration of call up
to now and (if set) the
charges incurred while the
call is in progress.
Send DTMF
Enter tone sequences
(numbers) for remote inquiries to an answering
machine.
Call
transfer=
Connect current call to a
second call. For you, both
calls are now ended.
Main menu
Access to the main menu.
Call status
List all held and active calls
(e.g. participants in a conference).
Confirm.
Apply
§Carol§
To dial the phone number
(e.g. Carol’s phone number), press and hold the
right display key.
Switch off
Press down.
Enter phone code.
Confirm input.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Calling
left page (34) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Calling
Tone sequences (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists. These
entries are transmitted directly as
DTMFcodes (control codes).
§Options§
Send DTMF
Open menu.
Select.
Using the Phonebook/
Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phonebook/Addressbook in the same way
as a normal entry.
Enter phone number.
Press until a "+" appears in
the display (wait for the
connection to be established).
Enter DTMF codes
(numbers).
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
Enter a name.
§Save§
Store entry.
You may also store just the DTMF
codes (numbers) and then send
them during the call.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phone.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
34
right page (35) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MyPhone.fm
35
My phone
Adjust your phone according to your
own wishes in the following ways to
give it a personal touch:
Ringtones (p. 86)
Assign individual ringtones to caller
groups or special dates
Pictures (page 120)
Assign individual pictures or photos
to your Addressbook entries.
Animations (p. 85)
Choose a start-up and closing animation as well as a personal greeting.
Screensaver (p. 84)
Choose an analogue or digital clock,
or a personal picture.
(Operator) Logo (p. 84)
Choose an individual picture (to be
displayed in standby mode)
Wallpaper (p. 84)
Choose your own permanent background image.
Colour scheme (p. 84)
Select a colour scheme for the user
interface.
Applications (p. 79)
Download your own applications
from the Internet.
Where do I get what?
You can purchase additional ringtones, logos, animations and Java
applications from your service provider or directly from Siemens.
Service supplier portal
Depending on your service provider,
you will find direct access to his portal on your telephone via menu
items or bookmarks. Please contact
your service provider for more information on these services.
Siemens Mobile Portal
You will find additional ringtones,
logos, animations and screensavers
as well as more application, games
and services in the Internet at this
address:
www.siemens.com/mobilephones
You will also find a service for saving
data here as well as a list of the countries in which these services are
available.
My menu
Create your own menu with frequently (p. 102) used functions,
phone numbers or WAP pages.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
My phone
left page (36) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Default book
Default book
C ¢L¢Select function.
Show entries
The entries in the standard directory
(Addressbook or Phonebook) are
shown.
J/ I
Select a name with the
first letter and/or scroll.
New entry
Phonebook
The Phonebook is located on the
SIM card. Only one phone number
can be entered per entry. The Phonebook on the SIM card can easily be
transferred into a different
telephone.
Business card
Address book (see also page 37)
Create your own business card to
sent to a different GSM-phone. If no
business card has been created yet,
you will be asked for your input.
Phonebook (see also page 41)
Default book
Move from field to field to
enter your details.
§Save§
Press.
You can set a particulary directory as
your preferred one to use.
Additional information
The content of the business card corresponds to international standards (vCard).
Copy numbers from AddressÏ
book/Phonebook.
Create new entry.
The selected standard book is
opened in standby mode with the
joystick.
Open Phonebook or
Addressbook.
Address book
In the Addressbook, a lot of data can
be recorded for each entry and additional functions such as pictures,
birthdays, chat can be used.
Groups
See page 40.

See page 43.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Pref_Book.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
36
right page (37) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Adressbook.fm
37
Address book
The Addressbook can store up to
1000 entries, each with a variety of
telephone and fax numbers as well
as additional address details. These
entries are managed separately from
those in the Phonebook in the phone
memory. However, you can exchange data between the Addressbook and the Phonebook on the
SIM card.
Possible input fields
New entry
E-mail:
The address book is set as standard:
Open Addressbook
(in standby mode)
Display input fields.
Select requiredinput
fields.
Fill in input fields. The
maximum number of
characters available is
shown at the top of the
display.
At least one name must
be entered. Always enter
phone number with
prefix.
Last name:
URL:
First name:
Com. services >>
Phone number:
Group:
Phone no./office:
Company:
Phone no./cell:
Address: >>
Fax:
Birthday: >>
Fax #2:
Picture:
Email #2:
All fields
Additional information
Group:
Allocation to a group
(page 40).
Address:
Extension to enter the
complete address:
Street:, ZIP:, City:, Country:
Com. services
Information if the entry is
being used as an inst.
message contact
(page 67):
Nickname:, WV user ID:,
ICQ number:,
AIM screen name:
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Address book
left page (38) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Birthday:
Picture:
Address book
After activation, you can
enter the date of birth.
Display/find entry
Reminder: The telephone
reminds you one day before the birthday at the
time entered.
Assign a picture to the entry. It is displayed if you
are called by the corresponding phone number.
Save the entry.
Additional information
switch to
Î Temporary
Phonebook.
Synchronisation
The Siemens MPM (Mobile Phone Manager, page 122) makes it possible to manage
the Addressbook using PCs.
Using Remote sync. you can synchronise
your mobile with an organiser stored on the
Internet (see also page 116).
Select required entry.
Display.
Display options
§Options§
All fields/Reduced fields
Display of number of input fields.
§Save§
Open Addressbook
(in standby mode).
The options menu only
ever offers the functions
for the currently selected
input field.
Move to ...
Allocate current or highlighted entries to a group.
View
Display an allocated
picture.
Copy to SIM Copies name and one
phone number to the
SIM card (Phonebook).
New SMS,
New MMS,
New e-mail
Create a message with the
selected entry.
Browser
Start WAP browser and visit URL.
Chat room
Begin chat page 67.
(For standard functions see page 21)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Adressbook.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
38
right page (39) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Adressbook.fm
Change entry
Open Addressbook
(in standby mode).
Select required entry.
§Edit§
Press.
Select input field.
Make changes. If necessary, delete or overwrite
entry.
§Save§
Save.
Addressbook options
Depending on the actual situation,
different functions will be offered.
These functions can be applied to
the entry currently selected as well
as to multiple selected entries:
§Options§
Move to ...
Open Addressbook
(in standby mode).
J/ I
Select a name with the
first letter and/or scroll.
The number is dialled.
If there are several numbers in the
address book entry, these are offered for selection.
Select phone number.
The number is dialled.
Open menu.
Allocate current or highlighted entries to a group.
Copy to SIM Copies name and number
to the SIM card (Phonebook).
Filter
Only those entries which
match the filter criteria are
displayed.
Import
Set up readiness to receive
for a Phonebook entry via
Infrared (page 94) or SMS
(p. 49).
Search
Enter search term.
Dialling an entry
39
(For standard functions see page 21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Address book
left page (40) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Address book
Groups
Ringing tone for group
Nine groups are specified in your
phone to enable you to arrange your
Addressbook entries clearly. You can
rename seven groups.
Assign a ringtone to a group that
plays when one of its members calls
you.
Open Addressbook
(in standby mode).
 Select (the number of entries is listed behind the
group name).
C ¢T¢Ring tones
¢Group calls
Select group.
Groups menu
§Options§
Open menu.
Rename
Change name of group.
Group
symbol
Assign a symbol to a group.
The symbol must then appear
in the display when one of the
group members calls.
Additional information
No group: Contains all Addressbook entries that do not belong to a group (name
cannot be changed).
Received: Contains Addressbook entries
received by Infrared (page 94) or SMS
(p. 49) (name cannot be changed).
Select group.
Confirm. If a ringtone has
already been set, it will be
played. Otherwise, the
ringtone list will be displayed and you can select
one.
I If necessary, select
a ringtone.
Confirm.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Adressbook.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
40
right page (41) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phonebook.fm
41
Phonebook
Entries in the Phonebook (on the
SIM card) are managed separately
from those in the Addressbook. You
can, however, exchange data between the Phonebook and the
Addressbook.
New entry
If the Phonebook has been selected
as standard:
Open Phonebook
(in standby mode).
Group:
Default No group
Important phone numbers are combined together in a group (VIP). This
is independent of the Addressbook
groups.
Location:
Default SIM
Special SIM cards can save phone
numbers in a protected area (SIM
protected) (PIN2 required).
Display input fields.
Record #:
Each entry is automatically assigned
a record number. You can also dial
using the record number.
Select input field.
§Save§
Select .
Fill in input fields. The
maximum number of
characters available is
shown at the top of the
display.
Number:
Always enter phone number with
prefix. An entry is not saved without
a phone number.
Name:
Enter first and/or last names.
Press to store the new
entry.
Additional information
switch to
Î Temporary
Addressbook.
§Country§
International dialling code.............page 30
Functions related to Text entry .....page 25
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Phonebook
left page (42) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Phonebook
Call (search for an entry)
Open Phonebook.
J/ I
Select a name with the
first letter and/or scroll.
Number is dialled.
Phonebook options
The following functions are available, depending on the current
situation.
§Options§
Open menu.
Copy to 9
Copy all highlighted entries to the Addressbook.
Copy all to 9
Copy all entries to the
Addressbook.
Delete all
The entire Phonebook
is deleted.
PIN-protected.
Import
Set up readiness to receive for a Phonebook
entry via Infrared
(page 94) or SMS
(p. 49).
Call using record no.
A record number is automatically assigned to every new entry in Phonebook.
Enter record number.
Press.
Press.
Change entry
Select entry in
Phonebook.
§Edit§
Press.
Select desired input field.
Make changes.
§Save§
Press.
(For standard functions see page 21)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phonebook.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
42
right page (43) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Phonebook.fm

/
Open Addressbook
(in standby mode).

Select.

Enter "own" phone numbers in
Phonebook (e.g., fax) for information. These numbers can be
changed, deleted and also sent as an
SMS message.

Display the phone numbers saved in
the VIP group.

Entries stored in the Phonebook on
the SIM card can also be used on other GSM phones.

43
On special SIM cards, phone numbers can be stored in a protected location. PIN2 is required for editing.
There might be phone numbers
saved in your Phonebook that have
been provided by your service provider. They may be used to call local
or national information services or to
use services offered by your service
provider.
Phone number extensions in the
Phonebook
Digits may be replaced by a "?" when
phone numbers are entered in the Phonebook/Addressbook:
# Press and hold.
These wildcards must be replaced with
numbers before dialling (e.g., with the extension numbers in a phone system).
To make a call, select the phone number
from the Phonebook/Addressbook.
Press.
Replace "?" with numbers.
Number is dialled.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Phonebook
left page (44) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Call records
Call records
The phone number of a caller is displayed if
Up to 500 entries are stored in
the records:
• the caller has switched off the
Incognito function and
Missed calls
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
• the network supports the "Caller
Identity" function.
Alternatively, a caller’s name is displayed if it is stored in the Phonebook/Addressbook.
Your phone stores the phone numbers of calls for convenient
redialling.
C ¢P
Select record.
Â
Icon for missed call (in
standby mode). Press the
display key beneath the
symbol to call up the Main
Inbox (page 48).
Calls received
Accepted calls are listed.
Open call list.
Calls dialed
Access to the last numbers dialled by
you.
Select phone number.
Dial phone number.
Delete records
The records are deleted.
Display information on
the phone number.
Call list menu
Or
§View§
Fast access in standby
mode.
The records menu can be called up if
an entry is highlighted.
§Options§
Open menu.
Copy to 9/
Copy to SIM
Copy the currently selected phone number into the preferred
directory.
(For standard functions see page 21)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Records.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
44
right page (45) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_TimeCharge.fm
45
Dur./charges
You can display the charges and duration during a call. You can set
a unit limitation for outgoing calls.
C ¢P¢Dur./charges
Last call
All outg. calls
Account limit
(PIN2 prompt)
Special SIM cards allow you or the
service provider to define a credit or
a period after which the phone is
barred for outgoing calls.
All incom.calls
§Edit§
Press.
Remain. units
Enter PIN2.
Charge setting
Select.
Account limit
Switch on.
Open report or settings.
Enter number of units.
§Reset§
Reset the selected report.
§OK§
Confirm.
Charge setting
Open menu.
Currency
Edit your currency.
Charge/Unit
(PIN2 prompt)
Enter the currency as well as the
charge per unit and time.
Then confirm the credit or reset the
counter. The status display for prepaid cards may vary depending on
the service provider.
Auto display
Call duration and charges are
automatically displayed.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Dur./charges
left page (46) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Camera
Camera
You can view photos/videos recorded on the integrated camera immediately,
• use the photo as a background image, logo, a switch on/off animation or a screensaver.
lected resolution. In video mode, the
recording time already used and the
maximum recording time still available is shown here.
è Camera
ÙÚ
• send the photo/video via MMS or
e-mail.
×
24
Switch on
C ¢R
Or
Starts camera in standby
mode.
Ñ
Switch over to single
image
Ò
and video recording.
The current (preview) image is displayed. You will see the following in
the first line from left to right:
Ù
Ú
Û
×
Brightness
Zoom factor.
White balance.
Flash connected.
In the top right-hand corner of the
preview image, the number of photos which can still be taken in the selected resolution is displayed. This
number varies considerably from
motif to motif (storage space required). Beneath the preview image,
you will find a reference to the se-
Premium
î Options
Ò
Photo mode
Takes a photo.
Displays the preview image of the next photo.
The photo is saved with a name, the
date and the time. To enter the
name, see Settings in the options
menu.
Settings prior to taking a photo:
Setting the brightness.
Sets the zoom factor.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Camera.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
46
right page (47) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Camera.fm
Image resolution
Camera options
A setting can be made for the quality
of the image regardless of the preview image resolution.
The following functions are available, depending on the current
situation.
Premium:
High:
Medium:
Wallpaper:
§Options§
640 × 480 (VGA)
320 × 240 (QVGA)
160 × 120 (QQVGA)
132 × 176
The resolution may decrease
depending on the selected digital
zoom.
Video mode
Start the video recording.
• Name for recordings
• Image resolution.
Pictures
Displays list of photos.
Other videos Display the video list.
Microphone Switches the microphone
on
on or off.
Use flash
Choose between:
Automatic, Off,
Red-eye
Auto-timer
The photo is taken approx.
15 seconds after triggering. For the last 5 seconds,
you will hear a signal tone
each second.
White
balance
Choose between:
Automatic, Indoor,
Outdoor
Terminate the video
recording.
A red point appears in the top right
in the display while the video recording is being made.
§Play§
Plays the video recording.
Flash (Accessories)
If the flash is active, this is shown by
a symbol in the display. The flash is
constantly loaded while connected
to the telephone. This reduces the
stand-by time.
×
This symbol appears when
the flash is being loaded.
Seettings, see options menu.
Open menu.
Settings
The video mode resolution is the same
as the preview image resolution.
47
(For standard functions see page 21)
Additional information
Insufficient memory available.
Start the memory assistant to
delete specific data (p. 91).
A mirror can be attached to the rearside of
the telephone depending on the telephone
variant. This makes it easier to make self
portraits.
Ê
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Camera
left page (48) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Main Inbox
Main Inbox
The central input folder offers immediate access to the messages currently received. This means that you
no longer have to look through all input folders for the various message
types. The entries are marked with a
symbol to indicate their type and status. You will find a list of the symbols
on page 13.
To call up the central input folder,
e.g. if a new SMS has been received:
ç
Press the display key beneath the symbol.
Or
In standby mode:
In the central input folder, you will
find the following message types:
SMS, MMS, E-mail
System messages:
Message about MMS, Missed alarm,
Missed appts., Missed calls, WAP push,
Voice message
Data objects:
Ring tones, Pictures and Video, calendar entries, Notes and Business card
When you open an entry,
the relevant application
also starts.
After a set time span, entries which
have already been read and opened
are only displayed in the messagerelated incoming lists (see Settings in
the options menu).
Main Inbox options
§Options§
Open menu.
Receive e-mails Select set access and
send all e-mails.
Settings
If entries have been
read, remove them from
the Main Inbox:
Daily,
Never,
Immediately
If Daily has been selected, specify the time.
(For standard functions see page 21)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_UnifiedInbox.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
48
right page (49) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
49
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SMS.fm
SMS
You can transmit and receive very
long messages (up to 760 characters) on your phone. They are automatically composed of several "normal" SMS messages (note higher
charges).
Additionally you can insert pictures
and sounds in an SMS.
Write/send
C ¢M¢Create new
¢SMS
Enter text.
You will find informationen on writing texts with
and without T9 in the
chapter "Text entry"
(page 25).
The following is displayed
in the to display line: Text
entry status, number of
SMS required, number of
characters still available.
Start sending procedure.
Ï / J Select phone number
from the Phonebook/
Addressbook or enter it.
§Group§ If necessary, select
a group.
Confirm. The SMS is transmitted to the service centre to be sent and saved in
the Sent items list.
Text options
§Options§
Open menu.
Save
Save composed text in draft
list.
Picture&
sound
Add pictures, animations and
sounds into message (see following text).
Insert
from
Text module (page 28)
Bookmarks, From 9
(Addressbook/Phonebook).
Format
Font size: Small font,
Medium font, Large font
Underline
Alignment: Default alignm.,
Left, Center, Right
Mark (highlight text with the
joystick)
Delete
text
Delete the whole text.
Send
with...
Select SMS profile so the SMS
can be sent.
(For standard functions see page 21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
SMS
left page (50) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
SMS
Picture&sound
Send the pictures and tones with
or without accompanying text.
Remember that these may be protected (DRM, page 19).
For My anim./My pictures/My sounds:
The selection is displayed/played back.
The selection is added to
the SMS.
§Options§
Open menu.
The pictures which have been added
are displayed, sounds are displayed
in the form of "wildcards".
Select Picture&sound.
SMS to group
The menu contains:
You can send an SMS message as
a "circular" to a recipient group.
The text input field is open:
Def animations
Def. sounds
My anim.
My pictures
My sounds
Select area.
Confirm. The first entry of
the selected section is
displayed.
Scroll to entry required.
For Def animations/Def. sounds:
The selection is added to
the SMS.
§Group§
Start sending procedure.
The Addressbook is
opened.
 The list of groups is
displayed.
Select group.
Open group and highlight
all/individual entries.
A safety inquiry is made
and then sending is
started.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
50
right page (51) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SMS.fm
Read
51
Reply options
Arrival of a new SMS announced in the display.
Open it with the display
key beneath it Main Inbox
(page 48).
Reading the SMS.
Scroll through message
line by line.
ç SMS
01.10.2005
19:42
+ 12398765431
Text of SMS . . .
Reply immediately.
Write message
Create a new reply
text.
Edit
Edit received SMS or
add new text.
Answer is YES
Add Answer is YES to
the SMS.
Answer is NO
Add Answer is NO to
the SMS.
Please call back, Add a standard text as
Delay, Thank
a reply to the SMS.
you
Read options
Delete
ì Options
§Options§
Open menu.
Reply
Reply
See "Reply options"
above.
Picture&sound
You can answer the SMS now open
immediately. The new additional
text is placed above the received
text.
Save picture/sound
contained in the SMS.
Zoom in
Enlarge/reduce text
display.
Archive
Move SMS message
to archive.
Functions for a direct
reply.
(For standard functions see page 21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
SMS
left page (52) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
SMS
Lists
All SMS messages are archived in different lists, according to their status.
(List of message symbols, see
page 14):
Inbox
C ¢M¢Inbox¢SMS
The list of received SMS messages is
displayed.
Draft
C ¢M¢Draft¢SMS
The list of not yet transmitted SMS
messages is displayed.
Unsent
C ¢M¢Unsent¢SMS
The list of concatenated SMS messages not yet completely sent is displayed. Transmission can be
restarted.
Sent
C ¢M¢Sent¢SMS
The list of sent SMS messages is
displayed.
SMS archive
C ¢M¢SMS archive
The list of SMS messages stored in
the phone is displayed.
List options
Different functions are offered depending on the list.
§Options§
Send
Open menu.
Send or forward entry.
Send with... Select an SMS profile for
transmission.
Archive
Move SMS message to
archive.
(For standard functions see page 21)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
52
right page (53) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SMS.fm
Setting
SMS signature
M¢Msg settings
C¢
¢SMS setup¢SMS signature
You can enter a "signature" with a
maximum of 16 characters. This signature will then be attached to each
SMS except §Reply§ and when changes are made to an existing SMS.
SMS profiles
Message • Manual: Inquiry for all
type
messages.
• Standard text: Normal SMS
message.
• Fax: Transmission via SMS.
• E-mail: Transmission via
SMS.
• New: You may need to obtain the required code number from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual, 1 hour, 3 hours,
6 hours, 1 day, 1 week,
Maximum*
* Maximum period that the service provider permits.
Status
report
Receive confirmation of successful/failed transimssion of a
message. This service may be
subject to a charge.
M¢Msg settings
C¢
¢SMS setup¢SMS profiles
Up to 5 SMS profiles can be set. The
transmission characteristics of an
SMS are defined in these. The presetting depends on the SIM card
inserted.
Activate profile
Select profile.
Activate.
Set profile
Select profile.
§Edit§
Open to edit the profile.
Service
center
Enter the phone numbers for
the service centre as provided
by the service provider.
Recipient Enter a standard recipient for
the profile.
53
Direct
If activated, the reply to your
reply = SMS message is handled via
your service centre (for information, please contact your
service provider).
SMS via
GPRS
Sent SMS automatically via
GPRS (page 94).
Save aft.
send
Sent SMS messages are
saved in the Sent items list.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
SMS
left page (54) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
SMS
More information on SMS
SMS status report
If the message cannot be transmitted to the service centre you are offered the chance to repeat the transmission. If this also fails, contact
your service provider. The Message
sent. message only indicates transmission to the service centre. This
will then attempt to relay the message within a certain period.
See also Validity period (page 53).
Phone number in SMS
Phone numbers displayed in the
§highlighted§ text can be dialled
(A) or saved in the
Phonebook/Addressbook.
Downloading ringtones and
logos
You can receive links for downloading ringtones, logos, screensavers,
animations and information about
applications with an SMS. Please
highlight this link and, by pressing
the Call key A, start the download. Please check that the dial-in access (page 94) is configured.
Remember that these may be protected (DRM, page 19).
ã SIM memory full
If the message icon flashes the
SIM memory is full. No more SMS
messages can be received. Messages
must be deleted or archived.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
54
right page (55) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
55
MMS
The Multimedia Messaging Service
enables you to send texts, pictures/
videos and sounds in a combined
message to another mobile phone or
to an e-mail address. All elements of
an MMS message are merged to
form a "slide show".
Depending on your phone's settings,
you will receive either the complete
message automatically or notification that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Ask your service provider whether
this service is available. You may
need to register for this service
separately.
Write texts with the help of T9
(page 25).
Pictures and videos can be recorded
with the integrated camera and/or
loaded from My stuff (page 120).
You can record Sounds with the
sound recorder and/or load them
from My stuff (page 120).
First select an object for processing
to be added to the first page of
the MMS:
Pictures/videos
Limits on picture size can be set in
the user settings.
Display picture/video
functions:
Create
Insert picture
Open list to select a picture.
C ¢M¢Create new¢MMS
Insert video
Open list to select a video.
An MMS consists of the address
header and the content.
An MMS may consists of a series of
pages. Each page may contain a text,
a picture/video and a sound. Remember that pictures and sounds
may be protected (DRM, page 19).
Camera
Activate the camera to take a photo
or record a video for the MMS
(page 46).
Also possible.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
MMS
left page (56) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
MMS
Open
Text
Display picture.
TEXT
Select and write the text.
Delete item
Delete inserted picture/video.
The text functions are displayed (see also page 25):
Save picture/Save video
Save picture/video for use later on.
Rights details
Display properties, incl. any user
right restrictions (page 19).
Sounds
SOUND
Select.
Display sound functions:
Insert sound
Open list to select a tone.
Record
Activate tone recording in order to
record tones (page 112).
Also possible.
Open
Play back the tone.
Delete item
Delete inserted tone.
Save sound
Save tone for use later on.
Rights details
Display properties, incl. any user
right restrictions (page 19).
Insert
Choose any of the following for
insertion: Text module, Bookmark,
From 9
Delete text
Delete text on current page.
Save text
Save text on the page as text module.
T9 input
T9 settings:
T9 preferred, Input language
Mark
Text processing together with
Copy and Insert.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
56
right page (57) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
Generation options
§Options§
Open menu.
Send
Send MMS.
Preview
Play entire MMS on the
display.
Picture...
See above page 55.
Sound...
See above page 56.
Text...
See above page 56.
Page...
Add page: Insert new page
behind current one.
Delete Page: Delete current page.
Page list: Display available
pages.
Timing: Enter the lifespan
of a page in seconds.
Properties
Enter sending parameters
(see next chapter).
Save as
templ.
After creating MMS, save it
as a template. See also
below.
Layout
Select one of four possible
layouts:
Text above, beneath, beside (on left or right) of
picture.
Color...
Select the colours for:
• Pict. backgrd.
• Text backgrd.
• Text color
(For standard functions see page 21)
57
Templates
C ¢M¢MMS templates
MMS templates are saved MMS with
not address. They can be sent as new
MMS or used as part of a new MMS.
A maximum of 10 templates can be
saved.
Create templates by writing a new
MMS or using an MMS which you
have already received.
§Options§
Open menu and select
Save as templ..
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
MMS
left page (58) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
MMS
Sending an MMS
The page(s) of the new MMS is (are)
already created and the MMS is displayed.
Open address entry.
ç MMS
Subject:
Greetings from London
To:
+1234567654321 |
Size:
85 KB
Þßá
Enter a brief description.
Send to:
Enter one or more
phone number(s)/e-mail
address(es).
Ï Insert from
Addressbook.
Display the size of the
current MMS.
Attachments:
Insert attachments.
Start sending procedure.
The MMS is sent after
confirmation.
Scroll downwards.
More:
Provide additional address fields.
Cc:
Address(es) of copy
recipient(s).
Bcc:
Address(es) of copy
recipient(s) who are not
visible to the other
recipients.
Date:
Creation date.
Use delivery time:
Use specified send time.
If §Yes§:
Delivery date:
Send date.
ì Options
Subject:
Size:
Expanded address fields
Delivery time:
Send time.
Icons for status information
Þ
ß
á
Priority.
Send report.
Contains DRM (page 19).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
58
right page (59) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
Sending options
§Options§
Open menu.
Send
Send MMS.
Play
Play entire MMS on the
display.
Edit
Object selection to change
an object.
Add
addressee
Add recipient from the current address directory.
Del.
addressee
Delete individual recipient.
Add
attchmnt.
Add attachment:
• Business card
• Appointments
• Picture
• Video
• Audio
• File
Page list
Display MMS pages for
viewing and/or changing.
Save as
templ.
After creating MMS, save it
as a template.
(For standard functions see page 21)
59
Receiving an MMS
Depending on the setting, an MMS
can (page 61) be received in two
ways:
Complete transmission
The complete MMS is sent to your
telephone. This can take quite long if
the MMS is large. Thus, the request
to switch to GPRS is displayed before
reception, if need be.
ç
Shown in the display.
Start reception. The MMS
is sent.
Preliminary notification
You are notified that an MMS is
awaiting reception.
Shown in the display.
Open the notification.
Display sender/date.
Display the properties of
the MMS.
§Accept§
The complete MMS is
sent.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
MMS
left page (60) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
MMS
Reading an MMS
Lists
An MMS has been fully received.
All MMS are saved in four different
lists (list of message icons, see
page 14):
Select the MMS.
Start automatic playing of
the MMS.
Key functions for playback:
To the next page.
Press briefly once to return
to the start of the current
page; press briefly twice to
return to the start of the
previous page.
Set volume.
C / B Terminate.
When the MMS is complete, the
message details are displayed.
Subject:
Description of the MMS.
From:
Information about the
sender.
Size:
Size of the MMS in Kbytes.
Expanded address fields
Scroll downwards.
More:
Additional input fields.
Cc:
Copy recipient.
Attachments:
Save attachments.
Date:
Reception date.
Symbols for status information
(see page 58).
Inbox
C ¢M¢Inbox¢MMS
The list of MMS messages and notifications received is displayed. To receive an MMS subsequently, open
notification and press §Accept§.
Draft
C ¢M¢Draft¢MMS
The list of stored drafts is displayed.
Unsent
C ¢M¢Unsent¢MMS
The list of the MMS messages not yet
completely transmitted is displayed.
Sent
C ¢M¢Sent¢MMS
The list of sent MMS messages is
displayed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
60
right page (61) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
List options
Setting
Different functions are offered depending on the list/situation.
M¢Msg settings
C¢
¢MMS settings
§Options§
Open menu.
61
¢Select function.
Play
Play MMS on the
display.
Edit
Display MMS for processing.
View
Display MMS for
viewing only (writeprotected).
Send all
Send MMS.
Reply to all
Reply to MMS
immediately.
Six MMS profiles can be set (5 in the
telephone memory, one on the
SIM card). The send properties can
be specified in them. If the setting
has not yet been set, you will receive
the necessary data from the service
provider or via the "Setting Configurator" at (page 125):
www.siemens.com/
mobilephonescustomercare
Forward
Enter recipient(s) for
forwarding.
Activate profile
Select profile.
Properties
Display message
parameters.
§OK§
Receiv.all MMS Send all new MMS
immediately.
(For standard functions see page 21)
Connection profile:
Profile is activated.
Set profile
§Change§ Display list of profiles.
Select profile.
§Edit§
Press. Make settings.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
MMS
left page (62) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
MMS
User settings
Set the MMS dispatch to suit your
requirements:
Delivery
report:
Request delivery confirmation for sent messages.
Default
priority:
Send priority:
Normal, High, Low
Expiry time: Select the period in which
the service centre is to try
to deliver the message:
Manual, 1 hour,
3 hours, 6 hours,
1 day, 1 week, Maximum*
* Maximum period that the
service provider permits.
Page
duration:
Enter the lifespan of a page
in seconds (standard
requirement).
Scroll forward in Manual or
Automatic mode.
Retrieval:
Receive complete MMS or
only notification of arrival.
Automatic
Receive complete MMS
immediately.
Auto.homenet
Receive complete MMS immediately in home network.
Manual
Only receive the
notification.
Create
mode:
Free, Limited, Warning
May be used to receive a
warning message or to limit
the size of a message.
Size
indication:
Set max. message size and
message handling.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MMS.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
62
right page (63) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Email.fm
63
E-mail
Your phone has an e-mail program
(client). You can use it to create and
receive e-mails.
Write
Different functions are offered depending on the position of the
cursor.
§Options§
C ¢M¢Create new¢E-mail
Enter the address data for the e-mail:
To:
Options
Enter one or more
e-mail address(es).
Ï Insert them from
the Addressbook/
Phonebook.
Open menu.
Send
Send e-mail.
Send later
Transfer e-mail into the
Unsent list.
Save
Save e-mail in the Draft
list.
Subject:
Enter e-mail heading
(up to 255 characters).
Add addressee Add recipient from the
current address
directory.
Text:
Enter text.
Delete line
Delete current line.
Insert from
Text module
Bookmark
From 9 Insert from
the Addressbook/
Phonebook.
Add attchmnt.
My stuff Open to make
a selection. Remember
that pictures and
sounds may be protected (DRM, page 19).
Delete text
Delete the whole text.
Text input
• T9 preferred
• Input language
Expanded address fields
More:
Opens additional input
fields.
Cc:
Address(es) of copy
recipient(s).
Bcc:
Address(es) of copy
recipient(s) who are not
visible to the other
recipients.
Attachments:
Add attachments such as
images and sounds.
To send:
Press.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
E-mail
left page (64) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
E-mail
Receive/read
Attachments
M¢Inbox
C¢
¢Select function.
Contains the e-mail attachments,
these can be saved in My stuff
(page 120).
Before an e-mail can be read, it must
be retrieved from the server. You
have two options:
§Options§
Open menu and select
Save attach..
Retrieve email
Lists
Only the message header in Main Inbox (page 48) is sent. You can then
decide if you also want to receive the
contents:
All e-mails are saved in different lists
depending on their status (list of
message icons, see page 14):
§Options§
Open menu and select
Ret. content.
or want to delete the e-mail on the
server:
§Options§
Open menu and select
Del. on server.
Send/receive
The set access is selected and all
e-mails transferred into Main Inbox
(page 48). At the same time, completed e-mails are transferred from
the Unsent list.
Inbox
C ¢M¢Inbox¢E-mail
The list of received e-mails is
displayed.
Draft
C ¢M¢Draft¢E-mail
The list of e-mails not yet transmitted is displayed.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Email.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
64
right page (65) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Email.fm
Unsent
Setting
C ¢M¢Unsent¢E-mail
M¢Msg settings
C¢
¢E-mail setup
The list of e-mails not yet transmitted is displayed.
65
¢Select function.
Sent
Accounts
C ¢M¢Sent¢E-mail
Before using this service you must
set the server access (account) and
your e-mail parameters. You will receive the necessary data from the
service provider.
The list of transmitted e-mails is
displayed.
List options
Different functions are offered depending on the list.
§Options§
Retrieve
email
Open menu.
Only transfer the message
header into Main Inbox
(page 48).
Ret. content Fetch the contents from the
server if only the message
header was received.
Del. on
server
Delete message on the
server.
(For standard functions see page 21)
Select account.
Activate access
Activate an account that
has already been created.
Set access
§Edit§
Start editing. Fill in the data fields as specified by
your service provider.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
E-mail
left page (66) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
E-mail
Account sett.
SMTP port: * (Default: 25)
Provider:
Select provider.
Your name.
SMTP
authentic.:
Authentication: Yes/No
User name:
E-mail
address:*
Your e-mail address, e.g.:
name@domain.abc
SMTP
password:
A user password will be
required if "Authentication" is set to Yes.
Reply
address:
Additional e-mail address
for replies.
User ID: *
Your user ID.
* Your service provider will supply you with
this information.
§Save§
Save settings.
Password: *
Your password.
General sett.
Only downl.
emails
smaller than
<10> Kbytes
Set maximum size for incoming e-mails.
Enter an e-mail address to which a
Bcc (blind carbon copy) is always sent.
Copy on
server:
E-mails remain on the
server after they have
been retrieved or are
deleted.
Download
mode:
Subject only, whole
e-mail, prompt.
Server type:
Select POP3 or IMAP4.
POP3
server: *
Enter Internet address if
the server type is POP3
and SMTP.
POP3 port: *
(Default: 110)
IMAP4
server: *
Enter Internet address if
the server type is IMAP4
and SMTP.
IMAP4 port: * (Default: 25)
SMTP
server: *
Enter Internet address.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Email.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
66
right page (67) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
Chat room
With this function you can transfer
text, audio clips, pictures and files
straight to and from one or more terminals (mobile phone, PC). This
function is not offered by all service
providers. Please ask your service
provider about this.
Your dialogue partners are entered
in contact lists. When a connection
has been established, these lists
show who is available, whether they
want to be disturbed and what mood
they are in.
Rapid access ...
Select the access (page 72)
C ¢M¢Chat room¢Login
The current contact list or the list is
displayed (if necessary, set access
first, page 72).
Specify your own status
(page 73)
§Options§
My settings
Open menu.
Select and make entries.
GPRS must be switched on.
C ¢M¢Inst. Message
Enter new contact
Start menu
§Options§
Open menu.
Set
Press, then:
Login
Select the access via
which the dialogue runs
or
Account: select (page 72).
Msg. history
Read the messages from
the last meeting.
Settings
Settings for your representation, the applications and servers.
Exit
End application.
67
Return to contact list.
Add contact
select and enter the user
ID at least.
Return to contact list.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Chat room
left page (68) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Chat room
Inst. Message with new contact
(page 71)
Select the contact.
Start Inst. Message.
Open editor.
Write text.
Send text …
... etc.
Login
C ¢M¢Chat room¢Login
Select the last access to be used
(see also Automatic login: page 73).
Contact lists
When the connection has been established, the contact list or the list
of the contact lists is shown for
selection.
In the contact list, you will find a list
of the most recently used contacts.
The first time you log in, an "empty"
contact list will be generated by the
server if necessary.
Displays in the list:
-Conversation
Displays of the online contacts for
the messages are available.
-Online
Online contacts with whom no conversation is being held at the moment.
-Group
Groups for Inst. Message with several contacts.
-Offline
Contacts who are not online at
present.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
68
right page (69) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
Managing the contacts
Managing the groups
69
Select a contact.
Select one of the groups
you set up yourself.
§Options§
Open menu.
§Options§
Open menu.
Set
Select.
Set
Select.
Contacts
Different functions are offered depending on the selection:
Group settings
Different functions are offered depending on the selection:
Add contact
User ID:
Enter a non-ambiguous
user (login) name.
Nickname:
Enter your own nickname for the contact.
Friend:
The contact receives the
status Friend: and
access to personal information (page 73).
Add member
Search for contact.
Find contact
Delete contact Delete contact from the
list.
Block contact
No more messages are
received from the contact and the contact receives no status
information from you.
This function works for
all your lists.
Add a new group member,
see also Add contact
(page 69).
Find member Search for group member.
Invite
Invitation to the contacts
in your own group to Inst.
Message.
Delete
member
Delete contact from the
group member list.
Add group
Add new group.
Find group
Search for group on the
server (no longer in the
"administered groups" list).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Chat room
left page (70) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Chat room
Create group Group ID:
Enter a non-ambiguous
group name.
Name:
Name of group.
Topic:
Topic of group.
Searchable:
Other people can look for
the group.
Welcome msg.:
Enter welcome text.
Contact list options
Create group Delete group.
Creating a new contact list
The current contact list is displayed.
§Options§
Open menu.
Contact lists
Available contact lists are
displayed.
§Options§
Open menu.
Create
Select.
Contact list ID:
Give the contact list its
own, specific name.
Name:
Allocate self-explanatory
names.
Confirm.
§Options§
Open menu.
Details =
Additional information
about the contact or the
group.
My settings
Information on your current personal status
(page 73).
Set
Functions for managing
a contact or a group.
Contact lists
Display contact lists for
selection.
Block list
Display all blocked contacts. Can be unblocked.
App. settings Set the application
(page 73).
Exclude
Terminate the application, the server remains
connected.
Logout
Log off from the server
and return to start menu.
Help
Display help text.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
70
right page (71) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
Start chat
Options (individual contact)
A contact list must be displayed.
§Options§
Select a contact or
a group.
Start communication with
the contact.
The page is displayed.
During Inst. Message with
a group, the name of the
sender is placed in front
of each contribution.
Send
sound =
71
Open menu.
Select and send a melody/
tone from the list
(DRM page 19).
Send
Select and send a picture
picture = from the list
(DRM page 19).
Send
other =
Send any file.
Details
Information about the contact (if this is authorised
by him).
Open editor.
Write text
Clear all
Send text. The text appears in the chat soon
afterwards.
Delete all texts in the current Inst. Message.
Block
contact
No more messages are received from the contact
and the contact receives
no status information from
you.
This function works for all
your lists.
Naturally, you can also receive messages from contacts whom you do
not know. This will be pointed out to
you in the display, and you can either switch to Inst. Message or ignore/block the contact.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Chat room
left page (72) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Chat room
Options (group contact)
§Options§
Open menu.
M¢Chat room
C¢
¢Settings
Leave group Exit group.
Details
Clear all
Account
Delete all texts in the current Inst. Message.
I /C
You will be informed in the display if
sounds or pictures are sent to you
during a dialogue.
Accept object.
or
§Reject§
¢Select function.
Information about the
group:
Group ID:, Name:, Topic:,
Owner:
Receiving objects
§Accept§
Setting
Reject object.
Msg. history
C ¢M¢Chat room
¢Msg. history
The messages from the last meeting
are displayed. You can read and delete the contributions.
Requirement: The server must be
disconnected, see Exclude (page 70)
and Automatic login: (page 73).
The list of available accesses is
displayed.
Select an access to establish a connection.
Or
/Account sett.
Set up an access or
change the settings as
specified by the service
provider. Depending on
the service provider, the
settings may not be
changeable.
Name:
Name of the access.
URL:
Enter URL, e.g.
www.abc.com
User ID:
Enter a non-ambiguous
user (login) name.
Password:
Enter password (shown
as a series of asterisks).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
72
right page (73) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Instantmsg.fm
My settings
App. settings
Information on your current
personal status:
Settings for the application used:
Alias:
Your own alias by which
you can be found on the
server.
AIM screen
name:
Name to be displayed in
the group.
Mood:
Information about your own
mood, e.g.
Happy, Sad, Tired, etc.
Status text:
Random text information,
e.g. "Am at home".
Availability: Availability:
Available, Not available,
Discreet
Cellphone:
§Options§
Enter the phone number
with internal extension
code.
For each setting, specify
who is allowed to view
your personal
information:
Public
All contacts.
Private
Contacts designated as
Friend: (page 69).
Hide
Nobody.
73
Automatic
login:
Auto-reconnect to the last
access to be used.
Timeout:
Time without action after
which the application is
terminated. However,
the server remains
connected.
Message info:/ Signal the receipt of mesOnline info:
sages: Yes/No
Signal given as:
• Audio
• Silent alert
• Pop-up
Popup windows authorised: Yes/No
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Chat room
left page (74) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Voice message/mailbox
Voice message/mailbox
Save call divert number
M¢Settings
C¢
¢Voice message
Most service providers provide
a mailbox in which a caller can leave
a voice mail for you if
• if your phone is switched off or
not ready to receive,
• if you do not want to answer,
• if you are making a phone call
(and if Call waiting (page 89) is not
activated).
If the voice mail service is not part of
your service provider's standard
package, you will need to register for
it, and possibly make the settings
manually. The following sequence
may vary from service provider to
service provider.
Settings
Calls are diverted to this phone
number.
T¢Call setup¢Divert
C¢
¢e. g. Unanswered¢Set
Or
§Mailbox§
Press to divert to the mailbox number.
§OK§
Registration with the network is confirmed a few
seconds later.
Listening to message
À
Save mailbox number
You call this phone number to listen
to the voice mails left for you.
ç
Ï / J Select number from
Phonebook/Addressbook
or enter/change it.
§OK§
Confirm.
A new voice message can be announced as follows, depending on
the service provider:
The service provider supplies you
with two phone numbers:
M¢Settings
C¢
¢Voice message
Enter phone number.
Icon plus beep.
Or
Notification via SMS.
Or
You receive a call with an automatic
announcement.
Call your mailbox and play the message(s) back.
Press and hold (if necessary enter mailbox number once only). Confirm
with §OK§ and §Mailbox§ depending on your service
provider.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Mailbox.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
74
right page (75) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_CB.fm
CB services
M¢Settings
C¢
¢CB services
Some service providers offer information services (info channels, Cell
Broadcast). If reception is activated,
your Topic list will supply you with
messages on the activated topics.
Topic
Select
§Options§
Open list menu.
75
If a topic is selected in the list you
can view it, activate/deactivate it, edit it or delete it.
CB messages are displayed in standby mode, longer messages are
scrolled automatically.
CB languages
Receive Cell Broadcast messages in
only one specific language or in all
languages.
Receive CB
You can activate and deactivate the
CB service. If the CB service is activated, standby time for the phone will
be reduced.
Ö, Õ
Topic list
You can add any topics to this personal list from the topic index. You
can preset 10 entries with their
channel numbers (ID) and, if applicable, with their names.
New topic Select.
• If no topic index is available, enter
a topic with its channel number
and confirm with §OK§.
• If the topic index has already been
transmitted, select a topic and activate it with §Options§.
Displays
Topic activated/deactivated.
New messages received on
the topic.
Messages already read.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
CB services
left page (76) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Surf & fun
Surf & fun
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
In addition, you can download
games and applications to your
phone. Internet access may require
registration with the service
provider.
Browser menu
§Options§
Open menu.
Homepage
Call up the pre-set homepage for the current profile.
Bookmarks
• List bookmarks
Display list of bookmarks stored in the
phone.
• Bookmark site
The current page is
saved as a bookmark.
Go to...
Enter URL for direct dial
to an Internet address,
e.g. wap.siemens.com
Reload
Reload current page.
Show URL
Display the URL of the
page currently loaded for
sending via
SMS/MMS/e-mail.
History
Display last Internet sites
to be visited.
Disconnect
Disconnect the Internet.
File
Save object on the current
page or save the complete page; display saved
pages.
Settings
Set or reset browser
(page 77).
Exit browser
Close the browser.
Access to the service
provider
Direct call-up of the browser with
the URL from your service provider.
Internet
C ¢O¢Internet
The browser is activated with the
pre-set option as soon as you call up
the function (Browser settings,
page 77; may be specified/preassigned by service provider).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Internet.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
76
right page (77) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Internet.fm
End connection
Browser settings
Press and hold to clear
down the connection and
close the browser.
Navigation in the browser
• Select a link.
• Settings, status on/off.
B • Press briefly: back a page.
• One input field/link forward/back.
• Scroll one line.
Display symbols in the browser
(selection)
²
±
Connecting
Offline
77
´
³
No network
GPRS
online
C ¢O¢Internet
§Options§
Open menu.
Settings
Select.
Browser
Set start option as well as
handling of pictures and
sounds plus send options.
Profiles
The list of profiles is displayed for activation/setting. For more information,
contact your service
provider.
Protocol
Set protocol parameters,
parameters push messages and abort
time as well as handling of
cookies.
Security
Set encryption.
Context
Reset session; delete
cache, history and cookies.
Enter special characters
* , 0 Select important special
characters.
Your Internet browser is licensed by:
Profiles
Preparation of the phone for Internet
access depends on the service provider concerned:
Profile pre-set
In most cases, access profiles have
already been created for one or more
service provider(s).
Select profile.
Activate profile.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Surf & fun
left page (78) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Surf & fun
Set profile manually
Save
You will receive the necessary data
from the service provider or via the
"Setting Configurator" (page 125) at:
www.siemens.com/
mobilephonescustomercare
Bookmark site
The current page is saved
in the phone as a
bookmark.
§Options§
Open menu.
Edit
Start processing. For the
Internet-specific settings
below, please contact your
service provider.
Delete
Delete selected profile.
Bookmarks
C ¢O¢Bookmarks
Display URL/call up page
List bookmarks
Display list of bookmarks
stored in the phone.
Select bookmark.
Call up URL.
Bookmark options
§Options§
Open menu.
Here you will find functions for
changing and managing bookmarks
and their folders. This includes editing individual entries with the corresponding URLs as well as deleting
and moving them to other folders.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Internet.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
78
right page (79) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Games&Apps.fm
Surf & fun
Games and Applications
or complete download
Games and applications are offered
on the Internet. Once downloaded,
these are available to you via the
telephone. Most applications include instructions. Some applications and games are already pre-installed on your telephone. You will
find these listed here:
www.siemens.com/c75
Ë
Requirements
WAP profile (page 77) and the access (page 94) must be configured.
Download
Select the correct access depending
on whether you are loading games
or applications:
C ¢O¢Games
or
C ¢O¢Applications
Load or start games, or else start applications or reload them with Download wiz..
Only description file
The description file is
loaded for information
purposes only. The application/game itself must
be loaded separately.
Ì
79
The application/game is
completely loaded.
Apply
Remember that applications/games
may be protected (DRM, page 19).
Í
The executable application is saved on the telephone and can be started
immediately.
Download wiz.
C ¢O¢Download wiz.
You will not be left on your own during the download!
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Surf & fun
left page (80) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Surf & fun
Options
Additional information
Processing and administering your
applications and folders:
Move
Move applications between
folders.
New folder Create and name new
folder.
Update
Reinstall an application
(update).
Security
Select a safety level.
Reinstall
Repeat after transmission
error.
Properties
Show details of the application/folder (name, version,
size, path, producer, date).
HTTP
profile
Display profile list for
activation/setting
(For standard functions see page 21)
You can use the browser to download applications (e.g. ringtones, games, pictures, animations) from the Internet.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applications subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications and for any direct damage or consequential damage of whatever nature resulting
from the use of this application. For technical reasons, such applications and subsequent enabling
of certain functions are lost in the event of the device being replaced/re-supplied and may be lost if
it is repaired. In such cases, the buyer is required
to download or enable the application again.
Please ensure that your phone has Digital Rights
Management (DRM) so that downloaded applications are protected from unauthorised reproduction. These applications are then exclusively
intended for your phone and cannot be transferred from this even to create a backup.
Siemens offers no warranty or guarantee nor
does it accept any liability for the customer's ability to download or enable applications again or to
do so free of charge. We recommend that you
carry out a backup from time to time of the applications on your PC using the "Mobile Phone Manager" (www.siemens.com/c75), page 122.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Games&Apps.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
80
right page (81) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Profiles.fm
81
Settings
Profiles
Profile settings
C ¢T¢Profiles
Edit a default profile or create a new
personal profile:
Several settings can be stored in
a phone profile in order, for example, to adapt the phone to the surrounding level of noise.
• Five standard profiles are provided
with default settings. They can be
changed however:
Normal environment
Quiet environment
Noisy environment
Car Kit
Headset
• You can set two personal profiles
().
• The special profile Airplane mode is
fixed and cannot be changed.
Switching on a profile
Select default profile or
personal profile.
Switch on profile.
Select profile.
§Options§
Open menu.
Change sett.
Select.
The list of available functions is
displayed.
When you have finished setting
a function, you return to the profile
menu where you can change
a further setting.
Additional information
• Calling up the list in standby mode:
G Profile list is displayed.
• The active profile is marked with ·.
Profile Options
§Options§
Open menu.
Activate
Activate selected profile.
Change sett.
Change profile settings.
Copy from
Copy settings from
another profile.
Rename
Change personal profile
(except default profiles).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (82) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Car Kit
If an original Siemens Car Kit is used,
the profile is switched on automatically as soon as the phone is inserted
into the cradle (see also accessories,
page 135).
Headset
The profile is only switched on automatically if an original Siemens
headset is used (see also accessories,
page 135).
Airplane mode
All alarms (appointments, alarm
clock) are deactivated. This profile
cannot be modified.
Switch on
Scroll to Airplane mode.
Confirm selection.
Confirm safety inquiry
again in order to activate
the profile. The phone
switches itself off
automatically.
Normal mode
When you switch on your phone
again, the previously set profile will
be reactivated automatically.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Profiles.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
82
right page (83) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Themes.fm
Settings
Topics
C ¢T¢Topics
Load a completely new user interface in your telephone. With the
press of a key, various functions are
re-organised based on a topic, e.g.
• switch on/off animation,
• background image,
• screensaver,
• switch on/off melody,
• additional animations.
Topic files are compressed to save
memory space. After a download or
a call from My stuff, these are automatically unzipped when activated.
Additional information
It is possible that the existing settings could
be overwritten.
Activate new topic
Select topic.
Display topic preview.
Activate new topic.
83
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (84) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Display
Wallpaper
T¢Display
C¢
¢Select function.
Set wallpaper graphic for display.
Language
Choose graphic to be displayed instead of the provider logo.
Set the language of the display text.
When "automatic" is set, the language of your home service provider
is used.
If a language that you do not understand happens to be set, the phone
can be reset to the language of your
home service provider with the following input (in standby mode):
*#0000#A
Text input
T9 preferred
Activate/deactivate intelligent text
entry.
Input language
Select language for text entry. Languages with T9 support are marked
with the T9 symbol.
Logo
Color scheme
Select colour scheme, incl. background image for the entire user
interface.
Screensaver
The screensaver shows a picture in
the display when a period of time set
by you has elapsed. An incoming call
and pressing any key will end the
function except if the code protection with the telephone code is
activated.
Change settings:
§Change§
Settings are displayed:
Preview
Display the screensaver.
Style:
Select Analog clock, Digital clock,
Bitmap, Energy saving
Picture:
Select image in the My stuff.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Display.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
84
right page (85) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Display.fm
Timeout:
Greeting
Set period after which the screensaver starts.
Enter greeting to be displayed instead of animation when phone is
switched on.
Code protection:
To terminate the screensaver, the
telephone code is requested.
Auto key lock:
Automatic keypad locking if no key
has been pressed for one minute in
standby mode.
Unlocking:
Press and hold.
Note
The screensaver Digital clock reduces the
phones standby time.
Start up anim.
Select animation to be shown when
phone is switched on.
Shutdn anim.
Select animation to be shown when
phone is switched off.
85
Large letters
You can choose between two font
sizes for the display.
Illumination
Set display light brighter/darker. The
darker the setting the longer the
standby time.
Press the joystick repeatedly at the top/bottom to
adjust up or down.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (86) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
Settings
Ring tones
Volume
T¢Ring tones
C¢
¢Select function.
Set different volumes for types of
call/functions.
Set the tones on the telephone to
suit your requirements.
Ringer setting
Settings are displayed for
changing.
Select
Calls
On/off
Activate/deactivate all
tones.
Messages
Beep
Reduce ringtone to
a short signal (beep).
Alarm clock
CB services
Organizer
Silent alert
To avoid the disturbance caused by
a ringing phone, you can activate
the silent alert function as an alternative. The silent alert can also be
activated in addition to the ringtone
(e.g. in noisy environments). This
function is deactivated when the
battery is being loaded and accessories are connected (except the headset).
Settings are displayed for
changing.
Select one of several different silent alerts.
Confirm setting.
System
Applications
The ringtone is sounded
again.
Set volume.
Confirm setting.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Ringtones.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
86
right page (87) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Ringtones.fm
Allocating a ringtone
More melodies
A ringtone which has already been
selected will be played or the list of
possible ringtones will be displayed
for selection.
Allocate further ringtones for:
d Calls
Allocate a single ringtone to all
phone numbers in the Addressbook.
Group calls
Allocate a different ringtone to each
group.
Other calls
Allocate one ringtone to the remaining callers.
87
Messages
Alarm clock
Organizer
Startup melody
Shutdown mel.
or record new ones with:
Sound recorder (page 112)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (88) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Phone Pilot
T¢Phone Pilot
C¢
¢Select function.
Your Phone Pilot accompanies you
with instructions for many actions
you can perform with your phone. It
reminds you of important deadlines
or birthdays.
A Phone Pilot is in the phone by default and cannot be deleted.
Activate/deactivate
Off
You can deactivate Phone
Pilot function.
Default
Select the included "standard figure".
If you have additional figures downloaded, you can also install, activate,
or delete them:
Select entry.
Activate.
Install
You can download additional figures
on the Internet.
Select entry in the list or
Inbox.
When installing a new
Phone Pilot you can give it
its own name.
§Yes§
Activate.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Avatar.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
88
right page (89) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_CallSetup.fm
Settings
Call setup
Ö
Õ
Ô
T¢Call setup
C¢
¢Select function.
Hide ID
89
Condition set.
Not set.
Display if status is unknown (e.g. with a new
SIM card).
When you make a call, your phone
number can be displayed on the recipient's display (depending on the
service providers).
Clear all
All set diversions are cleared.
To suppress this display, you can enable the "Hide ID" mode for all subsequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
The most common condition for call
divert is, for example:
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
Set up call divert (example)
Unanswered
Select Unanswered. (Includes the conditions Not
reachable, No reply, Busy,
see below)
Confirm.
Set
Select.
Confirm.
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
Ï/ J Select or enter the phone
Status check
You can check the current divert status for all conditions. After a short
pause, the current situation is transmitted by the network and
displayed.
§Mailbox§ Use existing mailbox phonenumbers, or
enter them if necessary.
number to which the calls
are to be diverted.
§OK§
Confirm. After a short
pause, the setting is confirmed by the network.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (90) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Not reachable
Divert occurs if phone is switched off
or is out of range.
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored phone number is displayed. Confirm number.
Ç
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress.
If Call waiting is activated (page 89),
you will hear the call waiting tone
during a call (page 32).
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signalled. Other
calls are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for B).
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_CallSetup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
90
right page (91) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_PhoneSetup.fm
Settings
91
Phone setup
Phone identity
T¢Phone setup
C¢
¢Select function.
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
Key tones
§More§
Set the type of acoustic key
acknowledgement.
Info tones
Set service and alarm tones:
On/off
Activate/deactivate tones.
Extended If switched on, a wider
range of service tones is
available, e.g.: end of
menu reached, network
connection interrupted.
Auto off
The phone switches off each day at
the set time.
Activate
§Time§
Press.
Enter time
(24-hour clock).
§OK§
Confirm.
Deactivate
§Manual§ Press.
§OK§
Confirm.
Press several times to display additional information about the device.
Device check
After the last information page,
a self-test as well as individual test
are offered. If you select Self test, all
individual test are carried out.
Software version
Display the software version for your phone
in standby mode:
# 0 6 #, then press §More§.
Memory assis.
The memory assistant will help you if
there is insufficient phone memory.
If necessary, it is automatically started by applications.
After the capacity has been checked,
all files and folders are displayed
with their size and you can view,
open or delete them as necessary.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (92) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
File system
Fact. settings
Format
(Phone-code protected)
Reset phone to default values (factory setting). This does not affect the
SIM card or the network settings.
The telephone memory is formatted
and all saved data such as ringtones,
pictures, games, etc. is deleted. Formatting can last longer than one
minute.
Clean up
Creating more memory by deleting
temporary, non-required files.
Alternatively enter in standby mode:
*#9999#A
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_PhoneSetup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
92
right page (93) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Clock.fm
Settings
93
Clock
§Options§
T¢Clock
C¢
¢Select function.
Set time
zone
Set time zone.
Time/date
Auto time
zone=
The clock must be set correctly once
at start-up.
Have the time zone automatically set by the network.
Search city
Search for a city.
Help
Operating instructions.
§Change§
Press.
First enter the date
(day/month/year), then
the time
(hours/minutes/seconds).
Additional information
If the battery is removed for longer than
30 seconds, the clock must be reset.
Time zones
The time zone can be selected in the
world map or a city list:
World map
Select the desired time
zone.
City list
Select a city in the selected time zone.
Open menu.
Date format
Select the display format for the
date.
Time format
Select 24h or 12h.
Buddhist date
Switch to the Buddhist year (not on
all phone models).
Show clock
Activate/deactivate time display in
standby mode.
Auto time
The time is set automatically.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (94) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Connectivity
IrDA
T¢Connectivity
C¢
¢Select function.
Your phone has an infrared interface. With this interface, you can exchange data such as pictures, ringtones, Addressbook entries,
business cards or organiser data with
other appliances which also have an
infrared interface.
GPRS
(General Packet Radio Service)
Switch GPRS on/off
GPRS is a new method for transmitting data faster in the mobile network. Use GPRS and if the network
has sufficient capacity, you can be
connected to the Internet permanently. Only the actual transmission
time is charged by the network operator. Some service providers do not
yet support this service.
Shown in the display:
£
¢
¤
Activated and available.
Registered.
Temporarily interrupted.
GPRS info
Display of information on connection status.
The infrared interface is on the right
side of the phone. The distance between the two devices must not exceed 30 cm. The infrared windows in
both appliances must be aligned as
accurately as possible with each
other.
Shown on the display:
¯
®
Infrared activated.
During transmission.
Data services
Basic setting and activation of the
connection profiles for data transmission such as MMS, WAP.
The phone default setting varies
from service provider to service provider.
• The settings have already been
implemented by the provider. You
can start immediately.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Connectivity.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
94
right page (95) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Connectivity.fm
• Access profiles have already been
created by your provider. Then select and activate profile.
• The access profiles must be configured manually. In this case, you
will receive the necessary data
from the service provider or via
the "Setting Configurator" at
(page 125):
www.siemens.com/
mobilephonescustomercare
Select profile
95
CSD settings (Circuit Switched Data)
Dial-up
number:
Enter ISP number.
Call type:
Select ISDN or analogue.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
DNS 2 (opt.):
(optional).
Select the profile.
Confirm selection.
GPRS settings (General Packet Radio
Service)
You can only start to use GPRS once
you have activated GPRS on your
phone (page 94).
Select the profile.
APN:
Open menu.
Open the selection.
Enter service provider
address.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
(optional).
Set profile
§Options§
§Edit§
Select CSD settings, and/or
GPRS settings.
§Edit§
Select service and enter
data (see below).
DNS 1 (opt.):
DNS 2 (opt.):
§Save§
Save settings.
HTTP profile
The phone default setting varies
from service provider to service provider.
• The settings have already been
implemented by the provider. You
can start immediately.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (96) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
• Access profiles have already been
created by your provider. Then select and activate profile.
• The access profiles must be configured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service provider in the Internat at this address:
www.siemens.com/
mobilephonescustomercare (page 125).
Make the settings.
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be enabled by the service provider. There
are variations in fax and data reception, depending on the network.
Please ask your service provider
about this.
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec voice/fax
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connection).
End transmission
End transmission with PC-software
and/or press B.
Rcve fax/data
Your service provider has given you
a number for telephoning and
a fax/data number.
The call is signalled by a special ringing tone and the type of call (fax or
data) is displayed. Now start the
communication program in your PC
to receive the fax/data.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Connectivity.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
96
right page (97) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Security.fm
Settings
Security
Only ‚
T¢Security
C¢
¢Select function.
(PIN 2 or phone code protected)
Auto key lock
If activated, the keypad is locked automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
Press and hold.
Direct call
(Phone-code protected)
Only one phone number can be dialled (see also page 33).
97
Dialling options are restricted to
SIM-protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually before dialling.
If the SIM card does not support
PIN 2 input, the whole Phonebook
can be protected with the phone
code.
This SIM only
(Phone-code protected)
The phone can be connected to
a SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a different SIM card, enter the phone
code when requested.
PIN code
Description, see page 23:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (98) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Barring
When roaming
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit network password for network barring.
Your service provider will give you
this password. You may need to be
registered separately for each
barring.
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
All outgoing
All outgoing calls except emergency
numbers are barred.
Ö
Õ
Ô
Outgoing intl.
(International outgoing)
Only national calls can be made.
Out.int.x home
(International outgoing without
home country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
All incoming
The phone is barred for all incoming
calls (forwarding of all calls to mailbox provides a similar effect).
Status check
The following information can be
displayed after a status check:
Barring set.
Barring not set.
Status unknown
(e. g. new SIM card).
Clear all
All barrings are deleted. A password
which the service provider will give
you is necessary for this function.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Security.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
98
right page (99) of C75 FCC, us-en FUG am, (09.06.2005, 08:58)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Network.fm
Settings
Network
Network info
T¢Network
C¢
¢Select function.
The list of GSM networks currently
available is displayed.
Line
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Select line
Select the currently used phone
number.
Display current phone
number.
Protected
(Phone-code protected)
You may limit usage to one phone
number.
Additional information
Special settings may be made for each
phone number (e.g., melody, call divert
etc.) To do this, first switch to the required
phone number.
Switch from phone number/connection in
standby mode:
0 Press.
§Line 1§
Press.
Æ
99
Indicates non-authorised
service providers (depending on SIM card).
Choose netwrk
Network search is restarted. This is
useful if you are not on your home
network or want to register on a different network. The network list is rebuilt when Auto network is set.
Auto network
Activate/deactivate, see also "Choose
netwrk" above. If "Automatic network" is activated, the next network
on the list is dialled in ranking order
of your "preferred networks". Otherwise a different network can be selected manually from the list of the
available GSM networks.
Preferred net
Enter your preferred service providers here for when you leave your
home network (e.g. if there are differences in price).
Your service provider is displayed:
§List§
Display list of preferred
networks.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Settings
left page (100) of C75 FCC, us-en FUG am, (09.06.2005, 08:58)
Settings
User group
Create/change entry:

or select an existing entry,
then select a new service
provider in the list and
confirm.
Record new service provider (last entry in the list):
Furth.network
Select, enter the provider
data and save it.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred network is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the telephone is next switched on or if another network is selected manually.
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900. Make sure that your service provider supports the selected
band.
Fast search
When this function is active, network reconnection is speeded up
(standby time is reduced).
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for example, or special tariffs apply. The details can be clarified with your service provider.
Active
Activate/deactivate function. "User
group" must be deactivated for normal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are obtained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls withinthe
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Network.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
100
Settings
Settings
Accessories
T¢Accessories
C¢
¢Select function.
Automatic settings
• Permanent illumination:
switched on.
• Key lock: switched off.
Car Kit
• Charging the phone battery.
Only in combination with an original
Siemens handsfree Car kit (see accessories). The car kit profile is activated automatically as soon as the
phone is inserted into the cradle.
• Auto. activation of the Car Kit
profile when phone is inserted
in cradle.
Auto answer
(factory default: off)
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
Å
Shown on the display.
Automatic switch off
(factory default: 2 hours)
The phone is powered by the car's
power supply. You can adjust the
time between switching off the ignition and the automatic switching off
of the phone.
Car loudspk.
Improves playback in certain circumstances.
101
Headset
Only in conjunction with an original
Siemens headset (see accessories). If
an original Siemens Headset is used
the profile is automatically activated
when the headset is plugged in.
Auto answer
(factory default: off)
Calls are accepted automatically after a few seconds (except where the
ringer is switched off or set to beep).
You should therefore be wearing the
headset.
Automatic setting
Accept call with Call key or PTT key,
even when the auto key lock is activated.
Auto answer
If you do not notice that your phone has accepted a call, there is the danger that the
caller may eavesdrop.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SetupAccessory.fm
right page (101) of C75 FCC, us-en FUG am, (09.06.2005, 08:59)
left page (102) of C75 FCC, us-en FUG am, (09.06.2005, 08:59)
My menu
My menu
C Press.
§My menu§ Press.
Create your own menu with frequently used functions, phone numbers or WAP pages.
Change menu
You can replace each entry (1–10)
with another entry from the selection list.
The list of 10 entries is preset. You
can, however, change it as you
want.
Use
Select the required entry.
Confirm.
Or
If the entry selected is
a phone number, you can
also call it with the Call
key.
§Change§
Select the required entry.
The function list is opened
for selection.
Select the new entry from
the list.
Confirm. The entry is
saved.
If Phonebook is selected,
the phone number must
also be selected; if Internet
is selected, the bookmark
must also be selected.
Reset all
(Telephone code required)
§Reset all§ Select. After a safety
query, the pre-assignment is reset.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MyMenu.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
102
right page (103) of C75 FCC, us-en FUG am, (09.06.2005, 08:59)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FastDial.fm
103
Fast access key
You can assign one important phone
number of a function to each one of
the two softkeys and number
keys 2 to 9 (speed-dial numbers).
The phone number can then be dialled or the function can be started
at the touch of a button.
£
Softkeys
Change
For example, the Internet function is
assigned to the softkey. To change
this (in standby mode):
§Internet§
Press briefly.
§Change§
Scroll to new assignment
in the list.
Service Provider
01.10.2005
Internet ì
10:10
Help
Additional information
The service provider may have already assigned functions to a softkey (e.g access to
"SIM services" or direct call-up of the Internet portal). It may not be possible to modify
this key assignment.
The left softkey may sometimes be replaced automatically by p/À to access
a new message for example.
Confirm.
• Special case Phone number. Pick
out a name from the Phonebook/
Addressbook for assignment to
the key.
• Special case Bookmark. Scroll to
a URL in the bookmark list for assignment to the key.
Apply
In standby mode:
Application
The "Internet" is just used as an example here.
§Internet§
Press and hold, the application is started.
Phone number:
The setting "Carol" is used here only
as an example.
§Carol§
Press and hold, the phone
number is dialled.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Fast access key
left page (104) of C75 FCC, us-en FUG am, (09.06.2005, 08:59)
Fast access key
Speed keys
Number keys 2 to 9 can be used as
speed dialling numbers for fast access. Number key 1 is reserved for
the mailbox phone number
(page 74) and number key 0 is reserved for switching over two connections during use (page 99).
Change
In standby mode:
Number key briefly press
(e.g. 3).
This number is still free:
§Set§
Press.
Select a new function
from the list and confirm
with §OK§.
Or
An assignment has already been made to this
key (assignment displayed above the right
softkey, e.g. Games)
§Games§
Press briefly.
§Change§
Scroll to application in the
list.
Confirm.
• Special case Phone number. Pick
out a name from the Phonebook/
Addressbook for assignment to
the key.
• Special case Bookmark. Scroll to
a URL in the bookmark list for assignment to the key.
Apply
Select a stored phone number or
start a stored application (e. g.
Calendar).
In standby mode:
Press briefly.
The assignment of the number key 3
is displayed above the right softkey
e.g.:
§Calendar§ Press down.
Or simply
Press and hold.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FastDial.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
104
right page (105) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Organizer.fm
105
Organizer
Calendar
Daily view
C ¢Q¢Calendar
Special displays:
You can enter appointments in the
calendar. Time and date must be set
for the Calendar to work correctly.
The calendar offers you three views:
Monthly view
Special colour coding:
Day with entries for appointments,
day-long appointments, weekend
Navigation:
One day forward/back.
One week forward/back.
Daily view open.
Weekly view
Special displays:
Appointments are shown as a horizontal colour bar on the vertical hour
division.
Navigation:
One day forward/back.
Forward/backward by the
hour through the day.
Description of appointment.
Navigation:
One day forward/back.
To the start/end of the day
or next/last entry.
Calend. setup
C ¢Q¢Calend. setup
Start of day:
Hour when the working day begins.
Start of week:
Weekday on which the monthly and
weekly view on the left starts
Weekend:
Set the days for the weekend.
Show birthdays:
Yes/No.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Organizer
left page (106) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Organizer
Appointments
C ¢Q¢Appointments
Appointments are displayed in chronological order in a list.
Enter new appointment

Select.
Category:
Memo
Text input for description
Voice memo
Enter voice memo. Shown
with alarm.
Call
Enter phone number to
be displayed with the
alarm.
Meeting
Text input for description
Vacation
Enter start and end date.
Birthday
Enter name and date.
Different input/selection fields are
displayed depending on the type.
The number of fields can be restricted, see Default at the end of the list.
Description:
Description of appointment.
Phone number:
Enter a phone number or select one
from the Addressbook.
Voice memo:
Enter a voice recording, see
Dictat.machine, page 109.
Location:
Location of appointment.
Whole day:
All-day appointment: Yes/No
Start date:
Date when appointment starts.
Start time:
Time when appointment starts.
End date:
Date when appointment ends.
End time:
Time when appointment ends.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Organizer.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
106
right page (107) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Organizer.fm
Information on the alarm
Alarm:
On/off or Silent.
107
Enter the timespan before
the appointment and select the time unit:
Minutes, Hours, Days
Recurrence:
Select a timeframe for repeating the
appointment:
No, Daily, Weekly, Monthly, Yearly
Enter a parameter for repeating:
Forever, Until, Events (number)
If Weekly is selected, certain weekdays can be highlighted.
All fields/Reduced fields
In the list, select those fields which
are to be offered for future entries.
Additional information
Display above set alarms:
¹
Alarm clock.
»
Appointment.
An alarm sounds even when the phone is
switched off (except in Airplane mode,
page 82). The phone does not go to standby mode. To deactivate it press any key.
When the set date and time are
reached there is an audio and a visual alarm. If an alarm is missed it appears in the list of missed appointments (p. 108).
Alarm type Memo: The text is
displayed.
Alarm type Meeting: The text is
shown in the display.
Alarm type Call: The phone number
is displayed and can be dialled immediately.
Alarm type Birthday: You can send
special birthday greetings by SMS,
MMS, e-mail or a call via §Options§.
With Pause you can set a repetition of
the alarm.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Organizer
left page (108) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Organizer
Tasks
Notes
C ¢Q¢Tasks
C ¢Q¢Notes
A task is displayed like an appointment in the agenda of the selected
day. However, unlike an appointment it does not require a time.
When no time is entered the task appears at the top of the list every day
until it is marked as completed.
The entries are made in the same
way as Appointments, see this section. Then:
Status:
Choose between: Done or Outstanding
Priority:
Selection in 5 levels of Lowest bis
Highest.
Date used:
If activated with Yes, the following
time-input option is offered.
Date due:/Due time:
Enter the date and time by when the
task is to be completed.
Alarm: as for Appointments.
Write and manage brief text notes.
Protect confidential information using a phone code.
Enter a new memo

Write a normal note.

Write a confidential note.
The phone code is required.
Enter text. The first line is
displayed later as a "title"
in the notes list.
§Options§
Open menu.
Save
Save note.
Missed appts.
C ¢Q¢Missed appts.
Events with an alarm (Appointments,
Tasks) to which you have not reacted
are listed for reading.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Organizer.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
108
right page (109) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Organizer.fm
Organiser options
Dictat.machine
Depending on the application used
(Calendar, Appointments, Tasks, Notes)
and the current situation, different
functions are offered.
C ¢Q¢Dictat.machine
§Options§
Open menu.
109
Use the dictating machine to record
short voice memos.
• Use your phone as a dictating machine when on the move.
Delete by
Delete all entries prior to
a certain date.
• Record a memo as a reminder or
as a note for others.
Delete done
Delete all completed
tasks.
• Add a voice memo to an appointment in the Calendar.
Activate/
Deactivate
Switch alarm on/off.
• Record a call.
Confidential
Protect note with phone
code. We recommend that
you do not store any passwords (PIN, TAN etc.) as
notes.
(For standard functions see page 21)
Warning!
The use of this feature may be subject to
restrictions under criminal law.
Please inform the other party to the conversation in advance if you want to record the
conversation and please keep such recordings confidential.
You may only use this feature if the other
party to the conversation agrees.
New recording

Select.
The remaining time available as well as the recording time are shown in the
display.
A brief tone sounds when
the recording starts. Now
say the text.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Organizer
left page (110) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Organizer
Pause/recording
alternately.
End recording.
The recording is automatically saved with a time
stamp. Rename with
§Options§.
Time zones
C ¢Q¢Time zones
The time zone can be selected in the
world map or a city list:
World map
Playback
D/ E
Select the desired
recording.
Playback/pause,
alternately.
Press and hold rapid rewind and fast forward.
Dictating machine options
§Options§
Handsfree
Open menu.
Playback via the built-in
loudspeaker.
(For standard functions see page 21)
Select the desired
recording.
City list
Select a city in the selected time zone.
Time zone options
§Options§
Open menu.
Set
Specify the time zone.
Auto time
zone=
The time zone is switched
automatically to local time
by the network.
Search city
Search for a city.
Help
Operating instructions.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Organizer.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
110
right page (111) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Extras
C ¢S¢Select function.
SIM services (optional)
Your service provider may offer special applications such as mobile
banking, share prices, etc. via the
SIM card.
If you have such a SIM card, the
SIM services will appear in the main
menu under "Extras" or directly
above the softkey (on the left).
Navigate to the various
days.
Display options: alarm call
time and days.
¹
§On§
07:30
Mo Tu We Th Fr Sa Su
Edit
Alarm clock
Switch to the week days.
é Alarm clock
Where there are several applications,
these are displayed in a SIM services
menu. With the SIM services menu,
your phone can support future additions in your service provider's user
package. For further information,
please contact your service provider.
§Edit§
Set alarm call time
(hh:mm).
Symbol for SIM services.
The alarm will ring at the time set by
you, even when the phone is
switched off.
111
OK
Set days for alarm calls.
Press again to delete the
highlighting.
Press and hold to highlight/unhighlight all the
days.
Confirm setting.
Press to set.
§OK§
Activate/deactivate the
alarm.
Additional information
Screen display in standby
mode: alarm clock activated.
With Pause you can set the alarm to repeat.
Switch to time setting.
¹
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Extras
left page (112) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Extras
C ¢S¢Select function.
Sound recorder
Use the sound recorder to record
noises and tones for use as ring
tones. The tone recording is normally started by other applications/ functions such as "assign ring tone".
New recording
Playback
D/ E
§Options§
Select the desired
recording.
Playback/pause,
alternately.
Press and hold rapid rewind and fast forward.
Open menu.
Handsfree
Playback via the builtin loudspeaker.
Set as...
Set the recording as
a ringtone.
Start from main menu
C ¢S¢Sound recorder
or also start from another
application:
(For standard functions see page 21)

Select.
Calculator
The remaining time available as well as the recording time are shown in the
display.
A brief tone sounds when
the recording starts.
The calculator can be used in a basic
version and with an advanced range
of functions. The input line and two
calculation lines (including the matrice with the calculation functions)
are located in the top display half.
Pause/record alternately.
Enter digits(s).
End recording.
F/ I
Navigate functions.
The recording is saved
with a timestamp in the
folder Sounds. Rename
with §Options§.
If starting from another application,
e.g. create MMS:
§Insert§
Transfer recording into
the application.
Use function.
Enter digits(s).
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
112
right page (113) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Use function. The result is
calculated and displayed
immediately.
Basic mode
+, -, *, /
Basic calculation types.
Result.
1/x
Conversion
Convert to percentage.
Decimal point.
±
Sign change "+" / "–"
§Options§ Extended mode:
Square root
Square
Exponent.
MS
save displayed number.
MR
Call up saved number.
M+
Insert number from memory.
Calculator options
§Options§
Open menu.
Convert
Call up the unit converter with the current
result.
Clear all
Delete all units.
Extended
mode/Basic
mode
Convert calculation
functions.
Memory save,
Memory recall,
Memory clear
Save or recall result;
delete memory.
(For standard functions see page 21)
113
Unit converter
C ¢S¢Unit converter
You can convert various measurement units into other measurement
units.
The following types are offered with
various units:
Velocity
Energy
Mass
Pressure
Time
Volume
Area
Length
Power
Temperature
Currency
Example of type Velocity units:
Type
Units
Velocity
Kilometers/h, Meters/sec,
Miles/h, Miles/sec, Knots,
Mach
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Extras
left page (114) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Extras
Convert
Currency
Select the source unit/
currency.
Switch to the input field.
Enter the quantity to be
converted.
Switch to the selection
field.
Select the target measurement unit / currency
The result is displayed.
You can use both input fields
alternately.
Special key functions:
Set decimal point.
Change prefix.
When you call up the function, you
must enter a basic currency into
which the conversions are to be
made.
Enter currency
(e. g. euro)
§Save§
Store entry.
Now enter the name and exchange
rate of the currency to be converted.
§Options§
Open menu.
Add currency Enter new currency and
exchange rate.
Set as base
Use entered currency as
basic currency.
Edit rate
Change the exchange
rate of the basic currency.
Calc.
Start calculator.
(For standard functions see page 21)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
114
right page (115) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
115
C ¢S¢Select function.
Countdown
Stopwatch
A set time elapses. The last
3 seconds are indicated by a beep.
At the end a special beep sounds.
Two intermediate times can be recorded and saved.
Display, also in standby mode.
Display, also in standby mode.
If no time has been enetered:
Start/stop.
Open input window
Save intermediate time.
Set period of time.
After a stop:
§Reset§
Reset to zero.
Stopwatch options
§Options§
Display saved entries.
(For standard functions see page 21)
Start.
If a countdown time is specified:
Open menu.
Stopwatch
list
Confirm.
Start countdown.
While the time is elapsing:
Interrupt counter.
Let counter continue
running.
§Reset§
Reset counter to starting
time.
§Edit§
Enter new period of time
and confirm with §OK§.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Extras
left page (116) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Extras
Remote synchronisation
Server sett.
C ¢S¢Remote sync.
Providers
You can use this function remotely
to access externally filed data (addresses, calendar, etc.) and synchronise these with the data on your
phone. The data can, for example,
be saved on a company computer or
in the Internet.
www.siemens-mobile.com/syncml
Syncronise
§Sync§
The computer is selected
and synchronisation started. When completed, the
actions which have been
performed are displayed.
§Next§
Scroll through the various
displays.
Sync. setting
The following settings can be made
prior to synchronisation:
Active profile
You can choose between 5 profiles.
Select profile.
Activate profile.
or
§Edit§
Set profile
Display the current service
provider.
Homepage: e.g.
www.siemens.com
Port:
Enter port number, e.g. 80.
User name: Enter user name (Login
name).
Password:
Enter password (shown as a
series of asterisks).
Calendar
path:
Contacts
path:
Notes path:
Tasks path:
HTTP authentication.
Confirmation required;
Yes/No (if No, the input
fields are not visible).
HTTP
name:
Enter name.
HTTP
password:
Enter password.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
116
right page (117) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Last sync:
Time of the last synchronisation.
Sync. mode
• Sync data: Modified data or All data
• Sync instruction: Two-way,
Device update or Server update
Date range
Select On/off
Enter the time in weeks in which entries (past and future) are to be synchronised.
Sync items:
Highlight database areas to be
synchronised:
Calendar
Contacts
Notes
Tasks
Save settings.
117
Device manag.
C¢S¢Device manag.
If you were informed about software
updates by a push message, you can
establish a connection to the provider's server using the Device manager, so you can download them.
When downloading is finished, you
will be asked to switch the phone off
and on again. Afterwards, the software of your phone will be updated.
Please follow the instructions in the
display.
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then select and activate profile.
• The access profiles must be configured manually. If necessary,
check with your service provider
for details. You will find the current settings for the service provider on the Internet at
www.siemens.com/
mobilephonescustomercare
under "FAQ".
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Extras
left page (118) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Extras
Active profile
A standard profile for downloading
the current software of the operating system is displayed.
§Sync§
Establish a connection
with the active profile.
Or
§Edit§
Call up profile list.
Select profile.
Activate profile.
Or
§Edit§
Set profile.
Last connect.
Display last connection.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Extras.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
118
right page (119) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MediaPlayer.fm
Media player
When you are viewing a picture/video or listening to a melody, the application starts a media playback.
Scroll to the next media
file.
Pictures
The following functions can be applied to a displayed picture:
Zoom function if the displayed picture has a higher resolution than the
display. The two softkeys
(+/–) enlarge/reduce the
picture. The joystick
moves the picture detail.
5 Centre the picture.
Switch to full-picture
mode and back again.
0-9
Switch on display illumination (only in full screen
mode).
§Send§
e.g. send via MMS or
e-mail.
119
Melodies/video
The media playback offers the following functions for melody and video playback:
Play or pause, depending
on the situation.
Set volume.
Mute.
§Stop§
Stop function.
End playback.
Options
§Options§
Open menu.
Different functions are offered depending on the starting situation
and the object.
Volume
Set the volume with the
joystick.
Set as...
Set picture as Wallpaper,
Logo for example, and
sounds for Incoming call,
Startup melody, for example.
Slideshow
Automatic run-through in
full-picture mode. Individual picture connection with
joystick.
Edit
Access to picture processing (application must be
loaded).
(For standard functions see page 21)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Media player
left page (120) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
My stuff
My stuff
To organise your files, you can use
the file system like a PC file manager.
There are some folders in My stuff for
the various data types for this purpose. If, for example, you want to
download new pictures or sounds,
the download function is contained
in the relevant folder.
My stuff options
§Options§
Move
Place highlighted file(s)
or folder in temporary
memory.
Copy
Place highlighted file(s)
or folder in temporary
memory.
Paste
Transfer content of temporary memory into current folder.
New folder
Create a new folder and
name it.
Preview
Switch over to miniature
view.
The cursor can be moved
freely in the preview.
Properties
Display information on
file or folder selected.
Open folder and start
download or start file with
related application
(For standard functions see page 21)
Remember that pictures and sounds
may be protected (DRM, page 19).
C ¢N
The list of the folders and files is
displayed.
Navigation
F/I
Open menu.
Select file/folder in lists.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MediaFolder.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
120
right page (121) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MediaFolder.fm
Index structure
Some folders have already been created for different data types in My
stuff. These folders cannot be
changed.
Folder
Description
Format
Pictures
Pictures
bmp
bmx
jpg/jpeg
png
gif
Videos
Videos
3gp
Animations
Switch on/off
animations
bmx
gif
Sounds
Melodies
mid
amr
wav
Topics
Loaded theme
(zipped)
Theme
configuration
(unzipped)
sdt
stc
Color skins
Colour skins for scs
the user interface.
Games
Java archive
Download info
jar
jad
Applications Applications,
such as Photo
Editor or Download Assistant.
Other
Internet sites.
html
wml
121
Depending on the service provider, the
structure, content and functionality of My
stuff may vary.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
My stuff
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
122
Mobile Phone Manager
Mobile Phone Manager
MPM (Mobile Phone Manager) enables you to use extended phone
functions from your PC. The phone
and PC communicate via infrared or
a data cable (see Accessories,
page 135).
You can download the newest version of MPM from the internet:
www.siemens.com/c75
Please consult the online help for
further information on the functions
and use of MPM.
Organiser
With the Organiser you can administer the contacts and appointments
of your phone and synchronize it between your phone, Outlook® and
other Siemens phones (including Gigaset). From PIM, you can use all
functions of Call Control.
Call Control
You can dial by mouse click directly
from Organiser. The initiation and
administration of phone conferences is also possible in a most convenient way - Your conversation partners are shown on the screen in a
virtual conference room, so you can
switch between a single call and the
conference without difficulty, and
call new participants and add them
to the conference by mouse click.
SMS and EMS management
Write EMS and SMS messages from
the convenience of your PC. Use all
the options your PC offers and use
your sounds and pictures to create
EMS messages. You can read, forward, print, delete and archive your
messages.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_PhoneManager.fm
left page (122) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Mobile Phone Manager
123
Backup and restore
Phone explorer
With the backup function, you can
regularly make a copy of your phone
data on the PC. If you ever lose the
data on your phone or replace the
phone, you can quickly retrieve all
data with the restore function.
Please observe all applicable restrictions for DRM protected data.
With Phone Explorer you can access
your phone's data fast and comfortably. The phone is simply added to
your PC's file structure as i fit was just
another folder on your PC.
Mobile Modem Assistant
Bookmark Management
Use your PC to browse the internet
and define your preferred internet
sites. Save the internet addresses as
bookmarks on your phone so that
you can quickly call them up at a later time when you are on the move.
Mobile Modem Assistant quickly and
effortlessly sets up an internet connection over your mobile phone so
that you can at once surf the internet
at home or abroad without difficulty.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_PhoneManager.fm
right page (123) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
124
Mobile Phone Manager
Processing pictures and photos
Plug & Sync
Picture and photo processing offers
you the opportunity to conveniently
create, edit and manage pictures
and photos. Filters and effects are
offered to help you create colourful,
attractive graphics. The user-friendly
interface makes child's play of transferring pictures/photos from or to
the mobile phone, and of changing
the graphic settings.
If desired, Plug & Sync relieves you of
routine tasks. With "Photos > PC" you
can transfer your newly taken pictures to the PC.
Media Pool
Media-Manager offers you a comfortable way of managing ringing
tones.
SmartSync
With SmartSync you can synchronize
your data with Outlook®, OutlookExpress® or Lotus Notes™ as soon as
your phone is connected to the PC.
New and edited contacts are synchronized automatically as are messages and appointments.
Notifier
While your phone is connected to
the PC, you are, if desired, always informed about incoming calls or
events on your PC's monitor - even if
your phone's ringing is switched off.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_PhoneManager.fm
left page (124) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
right page (125) of C75 FCC, us-en FUG am, (09.06.2005, 09:04)
125
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FAQ.fm
Questions & Answers
If you have any questions about using your phone, visit us at
www.siemens.com/mobilephonescustomercare anytime. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at www.siemens.com/
mobilephonescustomercare. Siemens will then send you the configuration messages.
Please follow the instructions contained in those messages.
Problem
Possible causes
Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Flat battery.
Press On/Off key for at least two seconds.
Too little standby
time.
Battery contacts dirty.
See also below under
"Charging error"
Frequent use of organiser and
games.
Fast search activated.
Display illumination on.
Unintentional keystrokes
(illumination!).
Charge battery. Check charging indicator in the
display.
Clean contacts.
Restrict use if necessary.
Deactivate speed search(page 100).
Switch off display illumination (page 85).
Activate key lock (page 97).
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Questions & Answers
left page (126) of C75 FCC, us-en FUG am, (09.06.2005, 09:04)
Questions & Answers
Problem
Possible causes
Possible solution
Charging error
(charge icon not
displayed).
Battery totally discharged.
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Temperature out of range:
+5 °C to +45 °C
(+41°F to +113°F).
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and telephone connection
socket, clean them if necessary, then insert battery
again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Only use original Siemens accessories.
Battery faulty.
Replace battery.
SIM error.
SIM card not inserted correctly. Check that the SIM card is inserted correctly
(page 15).
Dirty SIM card contacts.
Clean SIM card with a dry cloth.
SIM card with wrong voltage.
Use 3V SIM cards only.
SIM card damaged
Carry out a visual check. Change SIM card at ser(e.g. broken).
vice provider.
No network
Weak signal.
Move higher, to a window or an open space.
connection.
Outside GSM range.
Check service provider's coverage area.
Invalid SIM card.
Complain to the service provider.
New network not authorised.
Try manual selection or select a different network
(page 99).
Network call barring is set.
Check network barrings (page 98).
Network overloaded.
Try again later.
Phone loses
Signal too weak.
Reconnection to another service provider is autonetwork.
matic (page 99). Switching phone off and on again
can speed this up.
Calls not possible. Second line set.
Set first line \ (page 100).
New SIM card inserted.
Check for new barrings.
Charge limit reached.
Reset limit with PIN 2 (page 45).
Credit used up.
Load credit.
Certain uses of
Call restrictions are in place.
Barrings can be set by service provider.
phone not possible.
Check barrings (page 98).
Impossible to make Phonebook/Addressbook is full. Delete entries in Phonebook /Addressbook (see
entries in PhoneStandard functions, page 21).
book/Addressbook.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FAQ.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
126
right page (127) of C75 FCC, us-en FUG am, (09.06.2005, 09:04)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FAQ.fm
127
Problem
Possible causes
Possible solution
Voice message not
functioning.
ã flashes to indicate an SMS.
ä flashes to indicate an MMS.
å flashes to indicate an MMS.
Function cannot be
set.
Capacity problems
with, for example,
Games & More, ringtones, pictures, videos, SMS archive.
No WAP access,
downloading not
possible.
Text message cannot be sent.
Call divert to mailbox not set.
Set call divert to mailbox (page 74).
SMS memory is full.
Delete (see Standard functions, page 21) or file
SMS (page 52).
Delete MMS (see Standard functions, page 21).
EMS pictures &
sounds are not displayed at the destination phone.
No Internet access
possible.
PIN error/
PIN2 error.
Phone code error.
Service provider
Code error.
MMS memory full.
Phone memory full.
Delete messages, pictures, videos, games or applications.
Not supported by service provid- Contact your service provider.
er or registration required.
Phone memory full.
Delete files in the relevant areas. You can use the
memory assistant to delete specific files (page 91).
Profile not activated, profile set- Activate or set WAP profile (page 78). If necessary
tings wrong/incomplete.
ask your service provider.
Service provider does not support this service.
Phone number for service centre not set or incorrectly set.
SIM card contract does not support this service.
Service centre too busy.
Recipient does not have a
compatible phone.
Destination phone does not support the EMS standard.
Incorrect WAP profile set, or
wrong or incomplete settings.
Three wrong entries.
Contact your service provider.
Set service centre (page 53).
Contact your service provider.
Repeat message.
Check.
Check WAP settings; (page 78) contact your service provider if necessary.
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Three wrong entries.
Contact Siemens Service (page 129).
No authorisation for this service. Contact your service provider.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Questions & Answers
left page (128) of C75 FCC, us-en FUG am, (09.06.2005, 09:04)
Questions & Answers
Problem
Possible causes
Too few/too many
menu entries.
Functions may have been added or deleted by the service provider via the SIM card.
No fax possible.
Wrong settings in the PC.
No authorisation for this service.
Charge meter does Charge pulse is not transmitted.
not work.
Possible solution
Check with your service provider.
Check settings (page 96).
Contact your service provider.
Contact your service provider.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
connector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the phone!
Reset all settings to factory default page 92:
*#9999#A
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_FAQ.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
128
right page (129) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Hotline.fm
129
Customer Care
We offer fast, individual advice! You have
several options:
Our online support on the Internet:
www.siemens.com/
mobilephonescustomercare
We can be reached any time, any place.
You are given 24 hour support on all aspects of our products. Here you will find an
interactive fault-finding system, a compilation of the most frequently asked questions and answers, plus user guides and
current software updates to download.
When calling customer service, please
have ready your receipt and the phone
identity number (IMEI, to display press
#06#), the software version (to display,
press #06#, then §More§) and if available,
your Siemens Service customer number.
You will also find the most frequently
asked questions and answers in the section entitled "Questions & Answers" in this
user guide on page 125.
In some countries repair and replace services are impossible where the products are
not sold through our authorised dealers.
If repair work is necessary, please contact
one of our service centres:
Abu Dhabi .........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
Chile..................................................8 00 53 06 62
China ...........................................0 21 23 01 71 88
Colombia....................................01 80 07 00 66 24
Croatia ..............................................0 16 10 53 81
Czech Republic.................................2 33 03 27 27
Denmark ............................................. 35 25 86 00
Dubai ................................................0 43 96 64 33
Ecuador ..........................................18 00 10 10 00
Egypt.................................................0 23 33 41 11
Estonia.................................................. 6 30 47 97
Finland ............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany ......................................0 18 05 33 32 26
Greece ............................................80 11 11 11 16
Hong Kong .......................................... 28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland .................................................. 5 11 30 00
India .............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast.......................................... 05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.................................................... 2 72 37 17
Kuwait ................................................... 2 45 41 78
Latvia .................................................... 7 50 11 18
Lebanon.............................................. 01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 70 07 07 00
Luxembourg........................................ 43 84 33 99
Macedonia .......................................... 02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta .......................................+ 35 32 14 94 06 32
Mauritius ............................................... 2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco .............................................. 22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway................................................ 22 70 84 00
Oman ....................................................... 79 10 12
Pakistan ..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Peru ..................................................0 80 05 24 00
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Customer Care
left page (130) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Customer Care
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 09 99 66
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia ............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand ............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 64 59 98 98
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Venezuela....................................0 80 01 00 56 66
Vietnam...........................................84 89 20 24 64
Zimbabwe ............................................04 36 94 24
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Hotline.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
130
right page (131) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Maintenance.fm
131
Care and maintenance
Your phone has been designed and
manufactured to the highest of standards and should be treated with
great care. The suggestions below
will help you to enjoy your phone for
many years.
• Do not drop, knock or shake your
phone. Rough handling can damage internal circuit boards!
• Protect your phone from moisture
and humidity! Precipitation, humidity and liquids contain minerals that will corrode electronic
circuits. Should your phone nonetheless become wet, disconnect it
immediately from any power supply to avoid electric shock. Do not
place your phone (even to dry it)
on/in a source of heat such as a
microwave oven, oven or radiator.
The phone may become overheated and possibly explode.
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts is not working properly,
obtain fast and reliable help at our
service centres (see page 129).
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may be damaged and the casing
may become deformed and discoloured.
• Do not store your phone in hot areas (e.g. vehicle instrument panel
in the summer). High temperatures can shorten the life of electronic devices, damage batteries
and warp or melt certain plastics.
• Do not store your phone in cold areas. When the phone warms up
again (to its normal ambient temperature), moisture can form inside the phone, which may
damage electronic circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the phone!
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Care and maintenance
left page (132) of C75 FCC, us-en FUG am, (09.06.2005, 09:08)
Product data
Product data
Declaration of conformity
Siemens Information and Communication
mobile hereby declares that the phone described in this user guide is in compliance
with the essential requirements and other
relevant provisions of European Directive
1999/5/EC (R&TTE). The declaration of conformity (DoC) concerned has been signed.
Please call the company hotline if you require a copy of the original, or:
www.siemens.com/mobiledocs
Technical data
GSM class:
Frequency range:
4 (2 watt)
880–960 MHz
GSM class:
1 (1 watt)
Frequency range:
1,710–1,880 MHz
GSM class:
1 (1 watt)
Frequency range:
1,850–1,990 MHz
Weight:
85 g
Size:
103x44x17mm
(70 cm3)
Li-Ion battery:
750 mAh
Operating
temperature:
–10 °C… +55 °C
(+14°F to +131°F)
SIM card:
Plug-In 1.8V/3.0 V
Phone ID
You will need the following details if you
lose your phone or SIM card:
the number of the SIM card (on the card):
..............................................................
15 digit serial number of the phone
(under the battery):
..............................................................
the customer service number of the service
provider:
..............................................................
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to prevent misuse.
Operating time
The operating time depends upon
the respective conditions of use: Extreme temperatures considerably reduce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Call time: 100 to 330 minutes
Standby time: 60 to 300 hours
Action taken
Time Reduction of
(min) stand-by time by
Calling
30–90 minutes
Light *
40 minutes
Network search 1
5–10 minutes
* Key input, games, organiser etc.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Data.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
132
right page (133) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_SAR.fm
133
SAR (C75)
RF EXPOSURE/SPECIFIC ABSORPTION
RATE (SAR) INFORMATION
THIS SIEMENS C75 PHONE MEETS
THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO ELECTROMAGNETIC FIELDS.
Your cell phone is a radio transmitter
and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy established by
the Federal Communications Commission (FCC) of the U.S. Government and by Health Canada. These
limits are part of comprehensive
guidelines and establish permitted
levels of RF energy for the general
population. The guidelines were
developed and confirmed by independent scientific organizations
through periodic and thorough evaluation of scientific studies*. The limits include a substantial safety margin designed to assure the safety of
all persons, regardless of age and
health.
The exposure standard for cell
phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit
established by the FCC and by Health
Canada is 1.6 W/kg**. Tests for SAR
are conducted using standard operating positions accepted by the FCC
and by Industry Canada with the
phone transmitting at its highest cer-
tified power level in all tested frequency bands. Although the SAR is
determined at the highest certified
power level, the actual SAR level of
the phone while operating can be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a wireless base station, the lower the power output.
Before a phone model is available for
sale to the public, it must be tested
and the manufacturer must certify to
the FCC and Industry Canada that it
does not exceed the limit established by each government for safe
exposure. The tests are performed in
positions and locations (e.g., at the
ear and worn on the body), reported
to the FCC and available for review
by Industry Canada. The highest SAR
value for this Siemens C75 when
tested for use at the ear is
0.575 W/kg***
and when worn on the body is
0.777 W/kg***
Additional information on Specific
Absorption Rates (SAR) can be found
on the Cellular Telecommunications
Internet Association (CTIA) web-site
at www.phonefacts.net or the Canadian Wireless Telecommunications
Association (CWTA) website
www.cwta.ca
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
SAR (C75)
left page (134) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
SAR (C75)
SAR information on this Siemens
C75 phone is on file with the FCC
and can be found under the Display
Grant section of
www.fcc.gov/oet/fccid after searching
on FCC ID PWX-C75.
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the governmental requirements for safe RF
exposure.
For body worn operation, this mobile
phone has been tested and meets FCC
RF exposure guidelines when used with a
Siemens accessory designated for this
product, where available, or when used
with a carry accessory that contains no
metal and that positions the handset at
least 2.0 cm/0.79 in is the correct testing
distance from the body. Use of other carry
accessories may not ensure compliance
with FCC RF exposure guidelines.
* The World Health Organization (WHO,
CH-1211 Geneva 27, Switzerland), on
the basis of the actual knowledge, does
not see any necessity for special precautionary measures when using cell
phones.
Further information:
www.who.int/peh-emf
www.mmfai.org
www.siemens.com/mobilephones
** averaged over 1 g of tissue.
*** SAR values may vary depending on national requirements and network bands.
SAR information for different regions can
be found at
www.siemens.com/mobilephones
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_SAR.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
134
right page (135) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Accessory.fm
135
Accessories
Fashion & Carry
Carrying Cases
A range of carry cases is available at specialist shops or you can visit the Siemens
Mobile Store online:
Original Siemens Accessories
www.siemens.com/shop
Energy
Li-Ion Battery EBA-660 (750 mAh)
Spare battery.
Travel Charger
Travel Charger EU ETC-500
Travel Charger UK ETC-510
Travel charger with an extended input voltage range of 100–240 V.
Car Charger Plus ECC-600
Charger for the cigarette lighter socket in
the car. It is possible to make telephone calls
during charging.
Desktop Stand EDS-600
A smart and practical desk station for your
mobile phone.
Handsfree Portable
Headset Basic HHS-500
Headset without keys; accepting and ending
calls is done using the phone.
Headset HHS-510
Headset with key to accept and end calls.
Headset Purestyle HHS-610
High quality headset with button for accepting and ending calls. An ear hook which can
be adjusted for the left or the right ear,
makes it more comfortable to wear.
Office
Data Cable DCA-500
For connecting the phone to the serial
RS232 port of the PC.
Data Cable USB DCA-510
For connecting the phone to the USB port of
the PC. With load function.
Data Cable USB DCA-540
For connecting the phone to the USB port of
the PC. With load function.
SyncStation DSC-600
Table support for the telephone to facilitate
simultaneous data exchange and telephone
charging. Contains a desktop stand and
a USB data cable.
Multitainment
Flash IFL-600
Plug-in flash module for taking photos in areas with low ambient light.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Accessories
left page (136) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Accessories
Car Solutions
Mobile Holder Antenna HMH-750
The cradle for connecting an external antenna. Ideal for use with headset PTT or car kit
portable.
Can also be used as cradle for retrofitting
your handsfree car kit (series 55).
Car Kit Comfort Basic HKC-700
Handsfree kit with first-class digital call quality and supreme ease of use. Includes all
components needed for installation. The individual antenna solution is available in specialist shops.
Car Kit Easy HKP-700
Facilitates convenient handsfree talking with
high call quality. With the integrated, rotating
cradle and the flexible microphone positioning, the telephone can be optimally adjusted
to suit any vehicle interior. The power is supplied via the cigarette lighter socket.
Car Kit Portable HKP-500
Handsfree kit with integrated loudspeaker
and microphone, and auto answer feature.
Simply plug into the cigarette lighter socket.
Ideal for mobility between vehicles.
Optional Car Kit accessories
Car Data Adapter HKO-690
Products can be obtained in specialist shops
or you can visit the Siemens Mobile Store
online:
Original Siemens Accessories
www.siemens.com/shop
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_Accessory.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
136
right page (137) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
137
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Quality.fm
Quality
Battery quality statement
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As
a result the operating time of your
mobile phone may be considerably
reduced, even after a full recharge of
the battery.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suffering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
Display quality
declaration
For technological reasons, a few
small dots with different colours
may appear in the display in
exceptional cases.
Just remember that the appearance
of brighter or darker dots generally
does not mean that a fault has
occurred.
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Quality
left page (138) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
U.S. FDA
U.S. FDA
The U.S. Food and Drug
Administration's (FDA) Center
for Devices and Radiological
Health Consumer Update on
Mobile Phones
FDA has been receiving inquiries
about the safety of mobile phones,
including cellular phones and PCS
phones. The following summarizes
what is know – and what remains
unknown – about whether these
products can pose a hazard to
health, and what can be done to
minimize any potential risk. This information may be used to
respond to questions.
Why the concern?
Mobile phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave
range while being used. They also
emit very low levels of radio frequency energy (RF), considered non-significant, when in the stand-by mode.
It is well known that high levels of RF
can produce biological damage
through heating effects (this is how
your microwave oven is able to cook
food). However, it is not known
whether, to what extent, or through
what mechanism, lower levels of RF
might cause adverse health effects
as well. Although some research has
been done to address these questions, no clear picture of the biological effects of this type of radiation
has emerged to date. Thus, the available science does not allow us to
conclude that mobile phones are absolutely safe, or that they are unsafe.
However, the available scientific evidence does not demonstrate adverse health effects associated with
the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about
hand-held mobile phones, the kind
that have a built-in antenna that is
positioned close to the user's head
during normal telephone conversation. These types of mobile phones
are of concern because of the short
distance between the phone's antenna – the primary source of the RF
– and the person's head. The exposure to RF from mobile phones in
which the antenna is located at
greater distances from the user (on
the outside of a car, for example) is
drastically lower than that from
hand-held phones, because a person's RF exposure decreases rapidly
with distance from the source. The
safety of so-called “cordless phones,”
which have a base unit connected to
the telephone wiring in a house and
which operate at far lower power
levels and frequencies, has not been
questioned.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
138
right page (139) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
How much evidence is there that handheld mobile phones might be harmful?
Briefly, there is not enough evidence
to know for sure, either way; however, research efforts are on-going.
The existing scientific evidence is
conflicting and many of the studies
that have been done to date have
suffered from flaws in their research
methods. Animal experiments investigating the effects of RF exposures
characteristic of mobile phones have
yielded conflicting results. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in
laboratory animals. In one study,
mice genetically altered to be predisposed to developing one type of cancer developed more than twice as
many such cancers when they were
exposed to RF energy compared to
controls. There is much uncertainty
among scientists about whether results obtained from animal studies
apply to the use of mobile phones.
First, it is uncertain how to apply the
results obtained in rats and mice to
humans. Second, many of the studies showed increased tumor development used animals that had already been treated with cancercausing chemicals, and other studies
exposed the animals to the RF virtually continuously – up to 22 hours
per day.
For the past five years in the United
States, the mobile phone industry
has supported research into the safe-
139
ty of mobile phones. This research
has resulted in two findings in particular that merit additional study:
1. In a hospital-based, case-control
study, researchers looked for an association between mobile phone use
and either glioma (a type of brain
cancer) or acoustic neuroma
(a benign tumor of the nerve
sheath). No statistically significant
association was found between mobile phone use and acoustic neuroma. There was also no association
between mobile phone use and gliomas when all types of gliomas were
considered together. It should be
noted that the average length of mobile phone exposure in this study
was less than three years.
When 20 types of glioma were considered separately, however, an association was found between mobile
phone use and one rare type of glioma, neuroepithelliomatous tumors.
It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with
how often the mobile phone was
used, or the length of the calls. In
fact, the risk actually decreased with
cumulative hours of mobile phone
use. Most cancer causing agents increase risk with increased exposure.
An ongoing study of brain cancers by
the National Cancer Institute is expected to bear on the accuracy and
repeatability of these results.1
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
U.S. FDA
left page (140) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
U.S. FDA
2. Researchers conducted a large
battery of laboratory tests to assess
the effects of exposure to mobile
phone RF on genetic material. These
included tests for several kinds of abnormalities, including mutations,
chromosomal aberrations, DNA
strand breaks, and structural changes in the genetic material of blood
cells called lymphocytes. None of
the tests showed any effect of the RF
except for the micronucleus assay,
which detects structural effects on
the genetic material. The cells in this
assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the
test cells to radiation for this long resulted in heating. Since this assay is
known to be sensitive to heating,
heat alone could have caused the abnormalities to occur. The data already in the literature on the response of the micronucleus assay to
RF are conflicting. Thus follow-up research is necessary. 2
FDA is currently working with government, industry, and academic
groups to ensure the proper followup to these industry-funded research
findings. Collaboration with the Cellular Telecommunications Industry
Association (CTIA) in particular is expected to lead to FDA providing research recommendations and scientific oversight of new CTIA-funded
research based on such recommendations.
Two other studies of interest have
been reported recently in the
literature:
• Two groups of 18 people were exposed to simulated mobile phone
signals under laboratory conditions while they performed cognitive function tests. There were no
changes in the subjects' ability to
recall words, numbers, or pictures, or in their spatial memory,
but they were able to make choices more quickly in one visual test
when they were exposed to simulated mobile phone signals. This
was the only change noted among
more than 20 variables compared.3
• In a study of 209 brain tumor cases and 425 matched controls,
there was no increased risk of
brain tumors associated with mobile phone use. When tumors did
exist in certain locations, however, they were more likely to be on
the side of the head where the
mobile phone was used. Because
this occurred in only a small number of cases, the increased likelihood was too small to be
statistically significant.4
In summary, we do not have enough
information at this point to assure
the public that there are, or are not,
any low incident health problems associated with use of mobile phones.
FDA continues to work with all parties, including other federal agencies
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
140
right page (141) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
and industry, to assure that research
is undertaken to provide the necessary answers to the outstanding
questions about the safety of mobile
phones.
What is known about cases of human
cancer that have been reported in users
of hand-held mobile phones?
Some people who have used mobile
phones have been diagnosed with
brain cancer. But it is important to
understand that this type of cancer
also occurs among people who have
not used mobile phones. In fact,
brain cancer occurs in the U.S. population at a rate of about 6 new cases
per 100,000 people each year. At
that rate, assuming 80 million users
of mobile phones (a number increasing at a rate of about 1 million per
month), about 4800 cases of brain
cancer would be expected each year
among those 80 million people,
whether or not they used their
phones. Thus it is not possible to tell
whether any individual's cancer
arose because of the phone, or
whether it would have happened
anyway. A key question is whether
the risk of getting a particular form
of cancer is greater among people
who use mobile phones than among
the rest of the population. One way
to answer that question is to compare the usage of mobile phones
among people with brain cancer
with the use of mobile phones
among appropriately matched people without brain cancer. This is
141
called a case-control study. The current case-control study of brain cancers by the National Cancer Institute,
as well as the follow-up research to
be sponsored by industry, will begin
to generate this type of information.
What is FDA's role concerning the safety
of mobile phones?
Under the law, FDA does not review
the safety of radiation emitting consumer products such as mobile
phones before marketing, as it does
with new drugs or medical devices.
However, the agency has authority
to take action if mobile phones are
shown to emit radiation at a level
that is hazardous to the user. In such
a case, FDA could require the manufacturers of mobile phones to notify
users of the health hazard and to repair, replace or recall the phones so
that the hazard no longer exists.
Although the existing scientific data
do not justify FDA regulatory actions
at this time, FDA has urged the mobile phone industry to take a number
of steps to assure public safety. The
agency has recommended that the
industry:
• Support needed research into possible biological effects of RF of the
type emitted by mobile phones;
• Design mobile phones in a way
that minimizes any RF exposure
to the user that is not necessary
for device function; and
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
U.S. FDA
left page (142) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
U.S. FDA
• Cooperate in providing mobile
phone users with the best possible
information on what is known
about possible effects of mobile
phone use on human health.
• At the same time, FDA belongs to
an interagency working group of
the federal agencies that have responsibility for different aspects
of mobile phone safety to ensure
a coordinated effort at the federal
level. These agencies are:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Health and Safety
Administration
• National Telecommunications and
Information Administration
The National Institutes of Health also
participates in this group.
In the absence of conclusive information
about any possible risk, what can concerned individuals do?
If there is a risk from these products
– and at this point we do not know
that there is – it is probably very
small. But if people are concerned
about avoiding even potential risks,
there are simple steps they can take
to do so. For example, time is a key
factor in how much exposure a person receives. Those persons who
spend long periods of time on their
hand-held mobile phones could consider holding lengthy conversations
on conventional phones and reserving the hand-held models for shorter
conversations or for situations when
other types of phones are not available.
People who must conduct extended
conversations in their cars every day
could switch to a type of mobile
phone that places more distance between their bodies and the source of
the RF, since the exposure level
drops off dramatically with distance.
For example, they could switch to:
• a mobile phone in which the antenna is located outside the vehicle,
• a hand-held phone with a built-in
antenna connected to a different
antenna mounted on the outside
of the car or built into a separate
package, or
• a headset with a remote antenna
to a mobile phone carried at the
waist.
Where can I find additional information?
For additional information, see the
following websites:
• Federal Communications Commission (FCC) RF Safety Program
(select “Information on Human Exposure to RF Fields from Cellular
and PCS Radio Transmitters”):
www.fcc.gov/oet/rfsafety
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
142
right page (143) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
• World Health Organization (WHO)
International Commission on
Non-Ionizing Radiation Protection
(select Qs & As):
www.who.int/emf
• United Kingdom, National Radiological Protection Board:
www.nrpb.org.uk
• Cellular Telecommunications Industry Association (CTIA):
www.wow-com.com
• U.S. Food and Drug Administration (FDA) Center for devices and
Radiological Health:
www.fda.gov/cdhr/consumer/
1 Muscat et al. Epidemiological Study of
Cellular Telephone Use and Malignant Brain
Tumors. In: State of the Science Symposium; 1999 June 20; Long Beach, California.
2 Tice et al. Tests of mobile phone signals for
activity in genotoxicity and other laboratory
assays. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999,
Washington, DC; and personal communication, unpublished results.
3 Preece, AW, Iwi, G, Davies-Smith, A,
Wesnes, K, Butler, S, Lim, E, and Varey, A.
Effect of a 915- MHz simulated mobile
phone signal on cognitive function in man.
Int. J. Radiat. Biol., April 8, 1999.
4 Hardell, L, Nasman, A, Pahlson, A,
Hallquist, A and Mild, KH. Use of cellular
telephones and the risk for brain tumors;
a case-control study. Int. J. Oncol, 15:
113-116, 1999.
143
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
U.S. FDA
left page (144) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
FCC/Industry Canada Notice
FCC/Industry
Canada Notice
Your phone may cause TV or radio interference (for example, when using
a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to
stop using your telephone if such interference cannot be eliminated.
If you require assistance, please contact your local service facility.
This device complies with part 15 of
the FCC rules. Operation is subject to
the condition that this device does
not cause harmful interference.
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_FDA.fm
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
144
Ten Driving Safety Tips
145
When available, use a hands-free device.
Ten Driving Safety
Tips
Your Siemens wireless phone gives
you the power to communicate by
voice – almost anywhere, anytime.
But an important responsibility accompanies the benefits of wireless
phones, one that every user must
uphold.
When driving a car, driving is your
first responsibility. When using your
wireless phone behind the wheel of
a car, practice good common sense
and remember the following tips:
Get to know your phone and its features
such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of
valuable features most phones offer
including, automatic redial and
memory dial – most phones can
store up to 99 numbers in memory
dial. Also, work to memorize the
phone keypad so you can use the
speed dial function without taking
your attention off the road.
A number of hands-free wireless
phone accessories are readily available today. Whether you choose an
installed mounted device for your
phone or a speaker phone accessory,
take advantage of these devices if
they are available to you.
Position your phone within easy reach.
Make sure you place your wireless
phone within easy reach and where
you can grab it without removing
your eyes from the road. If you get
an incoming call at an inconvenient
time, let your voicemail answer it for
you.
Suspend conversations during hazardous driving conditions or situations.
Let the person you are speaking to
know you are driving; if necessary,
suspend the call in heavy traffic or
hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay
attention to the road.
Do not take notes or look up
phone numbers while driving.
If you are reading an address book or
business card while driving a car, or
writing a “to do” list, then you are not
watching where you are going. It’s
common sense. Don’t get caught in a
dangerous situation because you are
reading or writing and not paying attention to the road or nearby
vehicles.
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_Driving_Tips.fm
right page (145) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
146
Ten Driving Safety Tips
Dial sensibly and assess the traffic.
If possible, place calls when you are
not moving or before pulling into
traffic. Try to plan your calls before
you begin your trip, or attempt to coincide your calls with times you may
be stopped at a stop sign, red light or
otherwise stationary. But if you need
to dial while driving, follow this simple tip – dial only a few numbers,
check the road and your mirrors,
then continue.
Do not engage in stressful or emotional
conversations that may be distracting.
Stressful or emotional conversations
and driving do not mix – they are distracting and even dangerous when
you are behind the wheel. Make people you are talking with aware you
are driving and if necessary, suspend
phone conversations that have the
potential to divert your attention
from the road.
Use your phone to call for help.
Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous situations – with your phone
at your side, help is only three numbers away. Dial 9-1-1 in the case of
fire, traffic accident, road hazard, or
medical emergency. Remember, it is
a free call on your wireless phone.
Use your phone to help others in
emergencies.
Your wireless phone provides you a
perfect opportunity to be a “good Samaritan” in your community. If you
see an auto accident, crime in
progress or other serious emergencies where lives are in danger, call
9-1-1, as you would want others to
do for you.
Call roadside assistance or a special
wireless non-emergency assistance
number when necessary.
Certain situations you encounter
while driving may require attention,
but are not urgent enough to merit a
call to 9-1-1. But you can still use
your wireless phone to lend a hand.
If you see a broken-down vehicle
posing no serious hazard, a broken
traffic signal, a minor traffic accident
where no one appears injured, or a
vehicle you know to be stolen, call
roadside assistance or other special
non-emergency wireless numbers.
“The wireless industry reminds you to
use your phone safely when driving.”
For more information, please call
1 (888) 901-SAFE, or visit our Web site
at: www.wow-com.com
Provided by the Cellular Telecommunications Industry Association (CTIA)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_Driving_Tips.fm
left page (146) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Intellectual property
147
Intellectual property
Intellectual Property Restrictions
All Intellectual Property, as defined
below, which is owned by or otherwise the property of Siemens Information and Communications Mobile, LLC ("Siemens"), its affiliates,
partners or suppliers, relating to the
Phone, including but not limited to
accessories, parts or software relating thereto (the “Phone System”), is
proprietary under federal laws, state
laws and International treaty provisions. Intellectual Property includes,
but is not limited to, inventions (patentable or unpatentable), patents,
trade secrets, copyrights, software,
computer programs, and related
documentation and other works of
authorship. You may not infringe or
otherwise violate the rights secured
by the Intellectual Property. Moreover, you agree that you will not
(and will not attempt to) disassemble, decompile, reverse engineer,
prepare derivative works from, modify or make any other effort to create
source code from the software. No
title to ownership in the Intellectual
Property is transferred to you
through purchase or possession of
the Phone or its components. All applicable rights of the Intellectual
Property shall remain with Siemens,
its affiliates, partners or suppliers.
Siemens will have no liability with respect to any claim of patent infringe-
ment which is based upon the combination of the Product or parts
furnished hereunder with software,
apparatus or devices not furnished
by Siemens, nor will Siemens have
any liability for the use of ancillary
equipment or software not furnished by Siemens which is attached
to or used in connection with the
Product, The foregoing states the entire liability of Siemens with respect
to infringement of patents by the
Product or any parts thereof.
Laws in the United States and other
countries preserve for Siemens certain exclusive rights for copyrighted
Siemens software, such as the exclusive rights to reproduce and distribute copies of such Siemens software.
Siemens software may be used only
in the Product in which the software
was originally embodied when purchased, and such software in such
Product may not be replaced, copied, distributed. modified in any
way, or used to produce any derivative thereof. No other use including,
without limitation, alteration, modification, reproduction, distribution.
or reverse engineering of such
Siemens software or exercise of
rights in such Siemens software is
permitted. No license is granted by
implication, estoppel or otherwise
under Siemens patent rights or copyrights.
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_Intellectual_property.fm
right page (147) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
148
End user license agreement
End user license agreement
This Software License Agreement
("Agreement") is between You and
Siemens Information and Communication Mobile, LLC and/or one of its
affiliates ("Licensor"). The Agreement authorizes You to use the Software specified in Clause 1 below,
which may be included on Your
phone, stored on a CD-ROM, sent to
You by electronic mail, downloaded
from Licensor's Web pages or servers
or from other sources under the
terms and conditions set forth below. This is an agreement on end user rights and not an agreement for
sale. Licensor continues to own the
copy of the Software and any other
copy that You are authorized to
make pursuant to this Agreement.
Read this Agreement carefully before installing, downloading or using
the Software. Further, by installing,
downloading and/or using the Software, You agree to the terms and
conditions of this Agreement.
1. Software.
As used in this Agreement, the term
"Software" means, collectively:
(i) all the software in Your phone, all
of the contents of the disk(s),
CD-ROM(s), electronic mail and its
file attachments, or other media with
which this Agreement is provided;
(ii) related Licensor or third party
software;
(iii) digital images, stock photographs, clip art or other artistic
works ("Stock Files");
(iv) related explanatory written materials ("Documentation");
(v) fonts;
(vi) upgrades, modified versions, updates, additions and copies of the
Software, if any, licensed to You by
Licensor (collectively "Updates") and
(vii) any other possible documentation related thereto.
2. End user rights and use.
Licensor grants to You a non-exclusive, non-transferable end user right
to install the Software or use the
Software installed on the phone. The
Software is licensed with the phone
as a single integrated product and
may be used with the phone only as
set forth in these licensing terms.
3. Limitations on end user rights.
(a) You may not copy, distribute, or
make derivative works of the
Software.
(b) You may not use, modify, translate, reproduce or transfer the right
to use the Software or copy the Software except as expressly provided in
this Agreement.
(c) You may not resell, sublicense,
rent, lease or lend the Software; except You may permanently transfer
all of Your rights as set forth in the
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_EndUserLic.fm
left page (148) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
End user license agreement
Agreement only as part of a permanent sale or transfer of the phone,
provided the recipient agrees to the
terms of this Agreement.
(d) You may not reverse engineer,
reverse compile, disassemble or otherwise attempt to discover the
source code of the Software (except
to the extent that this restriction is
expressly prohibited by law) or create derivative works based on the
Software.
(e) You shall not display, modify,
reproduce or distribute any of the
Stock Files included with the
Software.
(f) You shall not display, modify, reproduce or distribute any of the preloaded content included with the
software unless permitted as stated
in the User Guide or in the prompts
in the Software. In the event that
You are allowed to display, modify,
reproduce or distribute certain parts
of the pre-loaded content, You shall
review the "Readme" files associated
with the pre-loaded content (contained on the CD) to ascertain what
rights You have with respect to such
materials. Pre-loaded content may
not be used in the production of libelous, defamatory, fraudulent, infringing, lewd, obscene or pornographic material or in any otherwise
illegal manner. You agree that You
shall only use the pre-loaded content
in a manner that complies with all
applicable laws, including, but not
149
limited to, applicable restrictions
concerning copyright and other intellectual property rights. You may
not register or claim any rights in the
pre-loaded content or derivative
works thereof.
(g) You agree that You shall only use
the Software in a manner that complies with all applicable laws in the
jurisdiction in which You use the
Software, including, but not limited
to, applicable restrictions concerning copyright and other intellectual
property rights.
4. Copyright.
Licensor and/or its software suppliers and their respective affiliates
own the Software and all rights, including without limitation including
proprietary rights therein, are protected by international treaty provisions and other applicable national
laws of the country in which it is being used. The structure, organization
and code of the Software are the
valuable trade secrets and confidential information.
5. Multiple copies/updates.
If the Software supports multiple
platforms or languages, if You receive the Software on multiple media, of if You otherwise receive multiple copies of the Software, the
number of phones on which all versions of the Software are installed
shall be one phone. If the Software is
an Update to a previous version of
the Software, You must possess a
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_EndUserLic.fm
right page (149) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
150
End user license agreement
valid end user right to such previous
version in order to use the Update
and You may use the previous version for ninety (90) days after You
receive the Update in order to assist
You in the transition to the Update.
After such time You no longer have a
right to use the previous version, except for the sole purpose of enabling
You to install the Update.
6. Commencement & termination.
This Agreement is effective from the
first date You use or install the Software. Your end user rights automatically and immediately terminate
without notice from Licensor if You
fail to comply with any provision of
this Agreement. In such event, You
must immediately delete, destroy or
return at Your own cost and expense, and without entitlement to
any refund of the purchase price, the
phone and the Software, and all related material to Licensor.
7. Except as expressly provided
in the limited warranty for the
phone, you acknowledge the Software is provided "as is" without warranty of any kind express or implied.
To the maximum extent permitted
by applicable law neither Licensor,
Licensor's Software suppliers or their
respective affiliates, nor the copyright holders make any representations or warranties, express or implied, including but not limited to
the warranties of merchantability or
fitness for a particular purpose or
that the Software will not infringe
any third party patents, copyrights,
trademarks or other rights. There is
no warranty by Licensor or by any
other party that the functions contained in the Software will meet your
requirements or that the operation
of the Software will be uninterrupted or error free.
8. Not fault tolerant.
The Software may contain technoloy
that is not fault tolerant and is not
designed, manufactured, or intended for use in environments or applications in which the failure of the licensed Software could lead direclty
to death, personal injury, or severe
physical or environmental damage
or financial loss.
9. Limitation of liability.
To the maximum extent permitted
by applicable law, in no event shall
Licensor or Licensor's Software suppliers or their respecitve affiliates
and employees be liable for any lost
profits, revenue, sales, data or costs
of procurement of substitute goods
or services, property damage, personal injury, interruption of business, loss of business information or
for any special, direct, indirect, incidental, economic, cover, punitive,
special or consequential damages,
however caused and whether arising
under contract, tort, negligence, or
other theory of liability arising out of
the use of or inability to use the Software, even if Licensor or its Software
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_EndUserLic.fm
left page (150) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
End user license agreement
suppliers are advised of the possibility of such damages. Because some
countries/states/jurisdictions do not
allow the exclusion or limitation of liability, but may allow liability to be
limited, in such cases, the liability of
Licensor, its Software suppliers and
their respective affiliates and employees shall be limited to, at Licensor's option, either (a) return of the
price paid less a reasonable amount
for usage, or (b) repair or replacment
of the Software that does not meet
the limited warranty provided with
the phone and which is returned in
accordance with the requirements of
the limited warranty.
Nothing contained in this Agreement shall prejudice the statutory
rights of any party dealing as a consumer. Nothing contained in this
Agreement limits Licensor's liability
to You in the event of death or personal injury resulting from Licensor's
negligence if law prohibits such a
limitation. Licensor is acting on behalf of its software suppliers and
their respective employees and affiliates for the purpose of disclaiming,
excluding and/or restricting obligations, warranties and liability as provided in this clause 9, but in no other
respects and for no other purpose.
151
10. Technical support.
Licensor has no obligation to furnish
You with technical support except as
agreed in writing between You and
Licensor in the Limited Warranty provided with the phone.
11. Export control.
The Software may be subject to export regulations of the United States
and other countries. You agree that
You shall comply with all applicable
export laws, restrictions and regulations of the United States or foreign
agencies or authorities, and shall not
export, or transfer for the purpose of
re-export, any Software, product or
technical data received under this
Agreement or any Software or product produced by use of such technical data, including processes and
services, in violation of any applicable restrictions, laws or regulations,
or without all necessary approvals.
12. Applicable law & general provisions.
This Agreement shall be governed by
and construed in accordance with
the laws of the State of California
without regard to its conflicts of laws
rules. This is the entire agreement
between Licensor and You relating
to the Software and it supersedes
any prior representations, discussions, undertakings, end user agreements, communications or advertising relating to the Software.
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050524
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\STD_FCC_EndUserLic.fm
right page (151) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
left page (152) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
Menu tree
Menu tree
Default book
> Show entries
New entry
Business card
Groups
Default book

Call records
> Missed calls
Calls received
Calls dialed
Delete records
Dur./charges
> Last call
All incom.calls
All outg. calls
Remain. units
Charge setting
> Currency
Charge/Unit
Surf & fun
> URL/service provider
Account limit
Games
Auto display
Applications
Download wiz.
Bookmarks
Internet
Camera
Messages
> Create new
> SMS
MMS
E-mail
Chat room
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MenuTree.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
152
right page (153) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MenuTree.fm
Messages
> Inbox
153
> SMS
MMS
E-mail
WAP push
Retrieve email
Send/receive
CB messages
Draft
> SMS
MMS
E-mail
Unsent
> SMS
MMS
E-mail
Send e-mail
Send/receive
Sent items
> SMS
MMS
E-mail
MMS templates
SMS archive
Text modules
Msg settings
> Zoom in
SMS setup
> SMS profiles
SMS signature
MMS settings
> Connection profile:
User settings
Help
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Menu tree
left page (154) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
Menu tree
Messages
> Msg settings
> E-mail setup
> Accounts
WAP push set.
General sett.
Voice message
Help
CB services
Organizer
> Calendar
Appointments
Tasks
Notes
Missed appts.
Dictat.machine
Time zones
Calend. setup
Extras
> SIM services
Alarm clock
Sound recorder
Calculator
Unit converter
Stopwatch
Countdown
Device manag.
Remote sync.
My stuff
Settings
> Profiles
Topics
Display
> Language
Text input
Wallpaper
Logo
Color scheme
Screensaver
Start up anim.
Shutdn anim.
> T9 preferred
Input language
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MenuTree.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
154
right page (155) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MenuTree.fm
Settings
> Display
> Greeting
Large letters
Illumination
Ring tones
> Ringer setting
Silent alert
Volume
> Calls
Messages
CB services
Alarm clock
d Calls
Organizer
Group calls
System
Other calls
Applications
More melodies
> Messages
Alarm clock
Organizer
Startup melody
Shutdown mel.
Phone Pilot
Call setup
Sound recorder
> Hide ID
Call waiting
Divert
> All calls
Call screening
Not reachable
Any key
No reply
Minute beep
Busy
Receiving fax
Receiving data
Status check
Clear all
Unanswered
155
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Menu tree
left page (156) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
Settings
Menu tree
> Phone setup
> Key tones
Info tones
Auto off
Phone identity
Memory assis.
File system
Fact. settings
Clock
> Format
Clean up
> Time/date
Time zones
Date format
Time format
Buddhist date
Show clock
Auto time
Connectivity
> GPRS
GPRS info
IrDA
Data services
HTTP profile
Authentication
Fax/data
> Send voice/fax
Rec voice/fax
Security
> Auto key lock
Rcve fax/data
Direct call
Only ‚
PIN code
This SIM only
> PIN control
Change PIN
Change PIN2
Chg.phonecode
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MenuTree.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
156
right page (157) of C75 FCC, us-en FUG am, (09.06.2005, 08:55)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_MenuTree.fm
Settings
> Security
> Barring
> All outgoing
Outgoing intl.
Out.int.x home
All incoming
When roaming
Status check
Clear all
Network
> Line
Network info
> Select line
Protected
Choose netwrk
Auto network
Preferred net
Band selection
Fast search
User group
> Active
Select group
All outgoing
Pref. group
Accessories
> Car Kit
> Auto answer
Auto off
Car loudspk.
Key assmnt.
Headset
> Auto answer
157
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Menu tree
left page (158) of C75 FCC, us-en FUG am, (09.06.2005, 09:19)
Index
Index
Accessories ....................................... 135
Additional books ................................. 43
Addressbook
Dial entry........................................ 39
Groups ........................................... 40
New entry ...................................... 37
Read entry ...................................... 39
Aircraft mode...................................... 82
Alarm
Alarm clock................................... 111
Type ............................................. 107
Alarm clock....................................... 111
All calls (call time/charge) ................... 45
All calls (diversion).............................. 90
All incoming (barrings) ....................... 98
Answering service (external) ............... 74
Any to answer..................................... 90
Appointments................................... 106
Authentication.................................... 96
Auto display
Clock .............................................. 93
Duration/charges ............................ 45
Auto key lock ...................................... 97
Auto time zone ...........................93, 110
Auto. Network selection...................... 99
Auto. redial......................................... 30
Automobile accessories..................... 136
Calculator......................................... 112
Calendar .......................................... 105
Call
Accept/end..................................... 31
Barring........................................... 98
Charges ......................................... 45
Conference .................................... 32
Divert............................................. 89
End ................................................ 29
Hold............................................... 31
Menu ............................................. 33
Reject............................................. 31
Swap (change) ............................... 31
Call back............................................. 30
Call divert........................................... 89
Call transfer........................................ 33
Call waiting .................................. 32, 89
Calling................................................ 29
Calls dialled (call list) .......................... 44
Calls received (call list)........................ 44
Camera .............................................. 46
Car Kit
Accessories .................................. 136
Setting ......................................... 101
Car kit accessories ............................ 136
Care of phone .................................. 131
Cell Broadcast (CB) ............................. 75
Central input ...................................... 48
Charge rate ........................................ 45
Charges.............................................. 45
Charging the battery .......................... 16
Clock.................................................. 93
Codes................................................. 23
Colour scheme ................................... 84
Conference ........................................ 32
Connection profiles ............................ 94
Contact list ......................................... 68
Control code (DTMF) .......................... 34
Countdown ...................................... 115
Credit limit ......................................... 45
CSD settings ....................................... 95
Band selection .................................. 100
Battery
Charge ........................................... 16
Insert.............................................. 15
Operating time .......................16, 132
quality declaration ........................ 137
Big letters ........................................... 85
Bookmarks (WAP) ......................... 76, 78
Browser .............................................. 77
Buddh. Date........................................ 93
Business card ...................................... 36
Busy number ...................................... 30
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SIX.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
158
right page (159) of C75 FCC, us-en FUG am, (09.06.2005, 09:19)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SIX.fm
159
Data connection ................................. 94
Date format ........................................ 93
Default book....................................... 36
Device manag................................... 117
Dialling code....................................... 29
Dialling with number keys................... 29
Dictating machine............................. 109
Digital rights management.................. 19
Direct call ........................................... 33
Direct reply (SMS) ............................... 53
Display
Illumination.................................... 85
Language ....................................... 84
Symbols ......................................... 13
Divert ................................................. 89
Driving safety ................................... 145
DTMF tones (tone sequences) ............. 34
Duration/charges ................................ 45
Handset volume ................................. 29
Handsfree talking ............................... 31
Headset
Accessories .................................. 135
Setting ......................................... 101
Hide ID ............................................... 89
Highlighting mode ............................. 22
Hold call ....................................... 31, 33
Home network ................................... 99
Hotline ............................................. 129
E-mail
Lists................................................ 64
Receive/read ................................... 64
Settings.......................................... 65
Write .............................................. 63
Emergency number ............................ 18
End user license agreement .............. 148
Extras ....................................... 111, 131
Factory settings .................................. 92
Fast access........................................ 103
Fast search ....................................... 100
Fax/data mode .................................... 96
Filter................................................... 90
Formatting (SMS text)......................... 49
Formatting (telephone memory) ......... 92
Forwarding (call) ................................ 33
Frequency range............................... 100
Games and applications ...................... 79
GPRS................................................... 94
Groups ............................................... 40
Identity number (IMEI) ....................... 91
IMEI number ...................................... 91
Info tones........................................... 91
Information services (CB).................... 75
Infrared .............................................. 94
Input language (T9)............................ 26
Inst. Message ..................................... 67
International dialling code .................. 30
Internet.............................................. 76
Kamera .............................................. 46
Key tones ........................................... 91
Language ........................................... 84
Legal notices ........................................ 3
Limit (call time/charge)....................... 45
Logo .................................................. 84
Loss of phone, SIM card .................... 132
Mailbox .............................................. 74
Maintenance of phone ..................... 131
Media Player..................................... 119
Menu
Controls ......................................... 20
My menu ..................................... 102
Speed dialling ................................ 23
Menu speed dialling ........................... 22
Menu tree ........................................ 152
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Index
left page (160) of C75 FCC, us-en FUG am, (09.06.2005, 09:19)
Index
Message
CB .................................................. 75
E-mail............................................. 63
MMS .............................................. 55
SMS..........................................49, 51
Message memory full.......................... 54
Message type...................................... 53
Microphone on/off ........................33, 47
Minute beep ....................................... 90
Missed appointments........................ 108
Missed calls (call list)........................... 44
MMS
Lists................................................ 60
Receive........................................... 59
Send............................................... 58
Write .............................................. 55
Mobile Phone Manager ..................... 122
Muting (microphone)....................33, 47
My menu .......................................... 102
My phone ........................................... 35
Network
Barring ........................................... 98
Connection..................................... 99
Settings.......................................... 99
Notes................................................ 108
Only ‚ ............................................. 97
Only this SIM ...................................... 97
Operating times (battery)............16, 132
Organiser.......................................... 105
Own (phone) numbers........................ 43
Own greeting ..................................... 85
PC connection..................................... 24
Phone (settings) ................................. 91
Phone code......................................... 23
Phone data ....................................... 132
Phone identity number (IMEI) ............. 91
Phone number transmission on/off...... 89
Phone Pilot ......................................... 88
Phonebook
Additional books............................. 43
call an entry.................................... 42
New entry ...................................... 41
Protected SIM ................................. 43
VIP numbers ................................... 43
Pictures & sounds (SMS)...................... 50
PIN
Change .......................................... 23
Control .......................................... 23
Enter.............................................. 18
Error ............................................ 127
PIN2 ................................................... 23
POP3 .................................................. 66
Preferred network .............................. 99
Preventing accidental activation ......... 24
Product data..................................... 132
Profiles
MMS .............................................. 61
Phone ............................................ 81
SMS ............................................... 53
WAP............................................... 77
Prompt ............................................... 30
Provider logo...................................... 84
PUK, PUK2 .......................................... 23
Questions & Answers........................ 125
Records .............................................. 44
Redial................................................. 29
Reminder ........................................... 30
Remote synchronisation ................... 116
Ringtone setting ................................. 86
Ringtones............................... 40, 86, 88
Safety precautions................................ 5
Screensaver........................................ 84
Second phone number ....................... 99
Security.............................................. 23
Service centre (SMS)........................... 53
Service supplier portal ........................ 35
Service tones...................................... 91
Set time/date...................................... 93
Settings.............................................. 81
Short message (SMS).......................... 49
Shown in the display .......................... 13
Shut down animation ......................... 85
Siemens City Portal............................. 35
Signal strength ................................... 19
Silent alert.......................................... 86
SIM card
Clear barring .................................. 24
Insert ............................................. 15
Problems...................................... 126
SIM services (optional) ..................... 111
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SIX.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
160
right page (161) of C75 FCC, us-en FUG am, (09.06.2005, 09:19)
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_SIX.fm
SMS
Archive........................................... 52
Lists................................................ 52
Profiles ........................................... 53
Read............................................... 51
Settings.......................................... 53
Signature ....................................... 53
T9 input ......................................... 26
To group ........................................ 50
Write .............................................. 49
SMTP .................................................. 66
SOS ................................................ 9, 18
Sound recorder ................................. 112
Special characters ............................... 25
Speech time (battery) ....................... 132
Speed dialling keys ........................... 104
Standard functions.............................. 21
Standby mode .................................... 20
Standby time ..............................16, 132
Start up animation .............................. 85
Stopwatch ........................................ 115
Storage location (Phonebook) ............. 41
Surf & fun ........................................... 76
Swap .................................................. 31
Switch off phone
Automatic ...................................... 91
Manually ........................................ 18
Switch on phone................................. 18
Symbols.............................................. 13
Synchronisation ................................ 116
T9 text entry ....................................... 26
Tasks ................................................ 108
Technical data .................................. 132
Text entry
With T9 .......................................... 26
Without T9 ..................................... 25
Text module ....................................... 26
Time zones ...........................18, 93, 110
Topics................................................. 83
161
Unanswered ....................................... 89
Unit converter .................................. 113
Upper and lowercase letters ............... 25
User group ....................................... 100
Validity, SMS ...................................... 53
Voice message (mailbox) .................... 74
Volume
Handset volume ............................. 29
Profiles........................................... 81
Ringtone ........................................ 86
Wallpaper (display)............................. 84
WAP ................................................... 76
WAP push........................................... 48
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
Index

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Modify Date                     : 2005:06:09 08:15:55Z
Create Date                     : 2005:06:09 08:15:55Z
Page Count                      : 161
Creation Date                   : 2005:06:09 08:15:55Z
Mod Date                        : 2005:06:09 08:15:55Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Thomas Euchner
Metadata Date                   : 2005:06:09 08:15:55Z
Creator                         : Thomas Euchner
Title                           : Aries.book
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools