BenQ Mobile and OHG C81 GSM Mobile Phone with Bluetooth User Manual C81 PHILLIPPE FCC FUG am

BenQ Mobile GmbH & Co. OHG GSM Mobile Phone with Bluetooth C81 PHILLIPPE FCC FUG am

Users Manual

Table of Contents 1See also Index at the end of this User Guideright page (1) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FUGIVZ.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Legal notices .............................. 3Safety precautions ..................... 6Antenna care ........................... 9Phone operation ...................... 9Electronic devices .................. 10Phone overview ....................... 13Display symbols ....................... 15Getting started ......................... 17Inserting SIM card/battery ...... 17RS MultiMediaCard™ .............. 18Charging the battery .............. 19Switching on/off, PIN entry ...... 20General instructions ................ 21Standby mode ....................... 21Receiving signal ..................... 21Digital Rights Mgmt. (DRM) .... 21Main menu ............................ 22Tabs ...................................... 22Menu controls ........................ 23Centre key ............................. 23Standard functions ................. 24Security .................................... 25Text input ................................. 27Calling ...................................... 31Ending a call .......................... 31Setting the volume ................ 31Accepting a call ...................... 32Rejecting a call ....................... 32Handsfree .............................. 33Swapping between 2 calls ...... 33Conference ............................ 34Call options ............................35Direct call ...............................35Tone sequences (DTMF) ......... 36Contacts .................................... 37All contacts ............................ 37Groups ................................... 38Online status ..........................38SIM ........................................39Filter ......................................39General functions ...................40Call records ............................... 42Time/charges ............................ 43Camera ..................................... 44SMS/MMS .................................. 46Writing an SMS ....................... 46Writing an MMS ......................47Receiving/reading ...................49Draft ......................................50Outbox ...................................50Sent ....................................... 50Msg. archive ...........................50Templates .............................. 51SMS settings ...........................51MMS settings ......................... 52Zoom in .................................53Emoticons ..............................53Save aft. send .........................53E-mail ........................................ 54Writing/sending ...................... 54Receiving/reading ...................55Draft ......................................56Table of ContentsSee also In-dex at the end of this User Guide
2 Table of ContentsSee also Index at the end of this User Guide© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FUGIVZ.fmleft page (2) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Outbox .................................. 56Msg. archive .......................... 56Setting ................................... 56WAP push ................................. 58Chat room ................................ 59Voice mailbox/Mailbox ............ 64CB services ............................... 65Internet .................................... 66Settings .................................... 69Profiles .................................. 69Ringtones .............................. 71Topics .................................... 72Display ................................... 72Silent alert ............................. 73Connectivity .......................... 74Shortcuts ............................... 77Call settings ........................... 79Phone settings ....................... 80Clock ..................................... 83Security ................................. 84Network ................................ 86Accessories ............................ 88Organizer ................................. 89Calendar ................................ 89Appointments ........................ 90Tasks ..................................... 92Notes ..................................... 92Dictat.machine ...................... 93Time zones ............................ 94Remote synchronisation ......... 95Extras ........................................ 97SIM services (optional) ...........97My applications ...................... 97Calculator ...............................97Unit converter ........................ 98Online status ..........................99Sound recorder ..................... 100Stopwatch ............................ 101Countdown .......................... 102Date calculator ..................... 102My menu ..............................102Alarm clock ............................. 104Media player ........................... 105My stuff .................................. 109Mobile Phone Manager .......... 112Questions & Answers ............. 115Customer Care ........................ 119Care and maintenance ........... 121Product data ........................... 122SAR ........................................ 123U.S. FDA .................................. 124FCC/Industry Canada Notice ... 130Intellectual property .............. 131Ten Driving Safety Tips ........... 132End user license agreement ......134Accessories ............................. 139Menu tree ............................... 141Index ....................................... 147See also In-dex at the end of this User Guide
3Legal noticesright page (3) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_LegalNotices.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Legal noticesThe mobile phone described in this guide is approved for use on the GSM and GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries.© 2006 Siemens Communications Inc.All rights reserved.Siemens and the C81 model phone are trademarks or registered trade-marks of Siemens and/or its affiliates in the United States and/or other countries.T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trade-marks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S and other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. DisclaimerThe information contained in the User Guide is written for the C81 phone. Siemens reserves the right to make changes and improvements to the products and any of the features of the products described in this document without prior notice. The contents of the user guide are provided "AS IS". Ex-cept as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a par-ticular purpose, are made in relation to the accuracy, reliability or contents of this document. Siemens reserves the right to revise the user guide or with-draw it at any time without prior no-tice. Under no circumstances shall Sie-mens be responsible for any loss of data or income or any special, inciden-tal, consequential or indirect damages howsoever caused.
Legal notices4© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_LegalNotices.fmleft page (4) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Export InformationThe mobile phone may be subject to export regulation of the United States and other countries. Diversion con-trary to law is prohibited. You must comply with all applicable export laws, restrictions and regulations of the United States foreign agencies or au-thorities, and may not export, or trans-fer for the purpose of re-export, the mobile phone or any part of the phone in violation of any applicable restric-tions, laws or regulations, or without all necessary approvals.Network ServicesA number of features included in this guide are called Network Services. They are special services provided by wireless service providers. In order to use any of these Network Servic-es, you must subscribe to these ser-vice(s) from your service provider and obtain instructions for their use. Some of these Network Services may not be available when roaming on a network other than your home network.Standby andTalk Time InformationThe mobile phone incorporates fea-tures that are new to the mobile phone world. These may include col-or displays and lighting, graphic games, music reproduction and browsing the Internet. The way you use the display and the features will affect the performance of the bat-tery and how long it lasts between charge cycles. The quoted standby times and talk times show the mini-mum and maximum performance that can be expected from the bat-tery under normal network condi-tions and with the default settings as set by the factory. However, playing games (particularly with the back-light continuously switched on) and listening to music will shorten the time available for standby and to make and receive telephone calls. Operation times also vary depending on network conditions, SIM settings, charging and battery condition, how you use your phone and other factors.
5Legal noticesright page (5) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_LegalNotices.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119MemoryThe mobile phone contains an inter-nal memory device that stores the software required to operate the mobile phone, communicate with the GSM/GPRS network and provide the user interface. Some features in the internal memory run additional devices and some additional games and utilities. The amount of memory available in the mobile phone is fi-nite and may be insufficient to store large numbers of applications and files. Warning!Remember to back up your data and to do so frequently. Always back up all data and programs before sending the mobile phone in for repair.
Safety precautions6© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmleft page (6) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Safety precautionsInformation for parentsPlease read the operating instructions and safety precautions carefully be-fore use.Explain the content and the hazards associated with using the phone to your children.Remember to comply with legal requirements and lo-cal restrictions when us-ing the phone. For exam-ple in aeroplanes, petrol stations, hospitals or while driving.Mobile phones can inter-fere with the functioning of medical devices such as hearing aids or pacemak-ers. Keep a distance of at least 9 inches (20cm) be-tween the phone and pacemaker. Whilst using the mobile phone, hold it to the ear furthest away from the pacemaker. For more information consult your doctor.Small parts such as the SIM Card, dust cap, lens ring and lens cap can be dismantled and swal-lowed by small children. The phone must therefore be stored out of the reach of small children.Tones, music and hands-free talking are repro-duced through the loud-speaker. Do not hold the phone to your ear when it rings or when you have switched on the handsfree function. Otherwise you risk serious permanent damage to your hearing.Only use original batteries (100 % mercury-free) and – charging devices. Other-wise you risk serious dam-age to health and proper-ty. The battery could explode, for instance.Permanent hearing loss may occur if you use ear- or headphones at high volume.You can adapt over time to a higher vol-ume, which may sound normal but can be damag-ing to your hearing. Set your volume to a safe lev-el. If you experience ring-ing in your ears, reduce the volume or discontinue use of your system.
7Safety precautionsright page (7) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119The mains voltage speci-fied on the power supply unit (V) must not be ex-ceeded. Otherwise the charging device may be destroyed.The power supply must be plugged into an easily ac-cessible AC mains power socket when charging the battery. The only way to turn off the charging de-vice after charging the battery is to unplug it. Do not use a handheld while driving.Do not place the phone near to electromagnetic data carriers such as credit cards and floppy disks. In-formation stored on them could be lost.You may only open the phone to replace the bat-tery (100 % mercury-free) and SIM Card. You must not open the battery un-der any circumstances. All other changes to this de-vice are strictly prohibited and will invalidate the guarantee.Please dispose of unwant-ed batteries and phones as permitted by the laws in your country.The phone may cause in-terference in the vicinity of TV sets, radios and PCs.Use only original accesso-ries. This will avoid poten-tial risks to health or prop-erty and ensure compliance with all rele-vant regulations.Improper use will invalidate the guarantee! These safety instructions also apply to original accessories.Product attributes are subject to changes in technology, design and availability. BenQ Mobile reserves the right to modify products with-out prior notice.This cellular phone offers a range of functions, it can be used in positions other than the head, such as on the body. In this case, separation dis-tance of 2.0 cm is required. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should posi-tion the device the above-stated dis-tance from your body.
Safety precautions8© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmleft page (8) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Bluetooth®Your phone has a Bluetooth inter-face. This makes it possible to estab-lish a wireless connection with your phone and a headset, a car kit or oth-er Bluetooth-enabled devices.In order to establish a secure link be-tween the devices and to prevent a third party from having access to your phone, you should observe the following points:• The initial connection between two devices, what is called "pair-ing", should take place in familiar surroundings. • Both devices must be able to iden-tify themselves once by using a password/PIN. To ensure suffi-cient security, you should choose a 16-digit number combination for a password that would be diffi-cult to guess (if a PIN has not been assigned).• An automatic connection accep-tance ("connection without confir-mation") should only be used in exceptional cases. In general, only trustworthy devices should be linked in order to minimise security risks. • You should restrict the "visibility" of your phone if possible. This will make it much more difficult for unknown devices to establish a connection with your phone. To do this, in the Bluetooth menu, set the option Visib.to others from Always visible to Not visible (page 76).• The name of your phone is trans-mitted in a Bluetooth connection. The factory default is the "Blue-tooth ID". The first time Bluetooth is activated, or later in the Bluetooth menu, you can change this name (My BT name, page 76).• If Bluetooth is not needed, this function should be deactivated.Before using Bluetooth accessories, or a mobile phone inside a vehicle, check the vehicle user guide for any limitations on the use of these prod-ucts.The Bluetooth® word mark and log-os are owned by Bluetooth SIG, Inc. and any use of such marks by BenQ Corp. is under licence. Other trade-marks and trade names are those of their respective owners.Bluetooth QDID (Qualified Design ID): B02422
9Safety precautionsright page (9) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Antenna careUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attach-ments could damage the phone and may violate FCC regulations.Phone operationNormal positionHold the phone as you would any other telephone with the antenna pointed up and over your shoulder.Tips on efficient operationFor your phone to operate most efficiently:• Extend your antenna fully (if applicable).• Do not touch the antenna unnec-essarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher pow-er level than otherwise needed.DrivingLaws pertaining to the use of mobile phones while driving vary significant-ly from state to state and sometimes even from locality to locality within states. For example, some areas may allow persons to use their mobile phones only if they employ a hands-free device, and some areas may prohibit the use of cell phones entirely. Accordingly, BenQ recom-mends that persons check the laws for the areas in which they drive or will be driving. For areas where the use of mobile phones while driving is per-mitted, BenQ encourages persons to use their phones responsibly and to employ hands-free devices. Also, if us-ing your phone while driving, please:• Give full attention to driving – driving safely is your first responsibility;• Use hands-free operation, if available;• Pull off the road and park before making or answering a call, if driving conditions so require.For vehicles equipped with air bagsAn air bag inflates with great force. DO NOT place objects, including ei-ther installed or portable wireless equipment, in the area over the air bag or in the air bag deployment ar-ea. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.ImportantRead this information before using your wireless handheld phone.As this mobile phone is equipped with a fixed (non-retractable) an-tenna, some paragraphs in the text below may not be applicable.
Safety precautions10© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmleft page (10) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.PacemakersThe Health Industry Manufacturers' Association recommends that a min-imum separation of six inches (6") be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommenda-tions are consistent with the inde-pendent research by and recommen-dations of Wireless Technology Research.Persons with pacemakers• should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;• should not carry the phone in a breast pocket;• should use the ear opposite the pacemaker to minimize the poten-tial for interference;• should turn the phone OFF imme-diately if there is any reason to suspect that interference is taking place.Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider or your hearing aid manu-facturer to discuss alternatives.Other medical devicesIf you use any other personal medi-cal devices, consult the manufactur-ers of your devices to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtain-ing this information.Turn your phone OFF in health care facilities when any regulations post-ed in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehi-cle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted facilitiesTurn your phone OFF in any facility where posted notices so require.
11Safety precautionsright page (11) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119AirplanesFCC and Airline Regulations prohibit using your phone while in the air. Turn your phone OFF when request-ed by the airline.Check and comply with the policy of your airline regarding the use of your phone while the airplane is on the ground.Blasting areasTo avoid interfering with blasting op-erations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Potentially explosive atmospheresTurn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and in-structions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive at-mosphere are often but not always clearly marked. They include: fueling areas such as gasoline stations; be-low deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or parti-cles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.Emergency calls (SOS)Your wireless phone can be used to make emergency calls. You can make an emergency call from the main display screen. Enter the local emergency number such as 911 and then press the A key.This phone, like any wireless phone, operates using radio signals, wire-less and landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential commu-nications (for example, medical emergencies). Remember – to make or receive any calls, the phone must be switched on and be used in a ser-vice area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network services or phone features are in use. Check with local service providers re-garding their network features. Always make certain that your phone is properly charged before attempting any emergency calls. If you allow your battery to discharge, you will be unable to receive or make calls, including emergency calls. You must then wait a few minutes after the charging begins to place any emergency calls.
Safety precautions12© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SecurityInfo.fmleft page (12) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119When making an emergency call, remember to give all of the neces-sary information as accurately as possible. Remember that your wire-less phone might be the only means of communication at the scene of an accident, therefore you should not terminate the call until given permis-sion to do so.Batteries and ChargersOnly use original batteries (100% mercury-free) and charging devices. Use of non-original batter-ies and/or charging devices may cause explosion resulting in serious injury and/or property damage. Use original accessories in order to avoid possible injury and property damage and to ensure compliance with appli-cable laws and regulations. Improper use invalidates the warranty.Battery safety precautionsTo reduce the risk of fire, injury or electric shock, and to properly dis-pose of batteries, please read and understand the following instruc-tions. CONTAINS LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DIS-POSED OF PROPERLY. DO NOT DIS-POSE IN MUNICIPAL WASTE.1. Only use the batteries specified for use with this mobile phone.2. Do not use batteries of different sizes or from different manufac-turers in this mobile phone.3. Do not dispose of the battery in a fire; it may explode. Dispose of used batteries and phones in accordance with applicable laws and safety regulations. Do not expose battery to water. Check with local codes for special dis-posal instructions. 4. Do not open or mutilate the bat-tery. Doing so may cause damage to the eyes or skin.5. Exercise care in handling the bat-tery in order not to short the bat-tery with conducting materials such as rings, bracelets, and keys. The battery or conducting mate-rial may overheat and cause burns or fire.6. Charge the battery provided with, or identified for use with, this product only in accordance with the instructions and limitations specified in the User's Guide. Do not attempt to charge the battery by any means other than those specified in the User's Guide.
13Phone overviewright page (13) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Overview.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Phone overview1 SoftkeysThe current functions of these keys are shown as §text§/symbols (e.g. p).2 A Call key (green)Dial displayed/highlighted phone numbers/names, accepts calls. In standby mode, show last phone num-bers dialled. 3 B On/Off/End key (red)• Switched off: press to switch on.• During a conversation or in an appli-cation: press briefly to end. • In menus: return to standby mode.• In standby mode: Press and hold to switch off the phone;press briefly: switch-off menu.4 Media player keyDirect key for media player.5 Internet keyKey for Internet access unless other-wise preconfigured.6 Centre keyí Press the centre key to open the main menu and to start an appli-cation or function (page 23).7 Navigation keysIn standby mode:G Open user profiles.H Open contacts.E Open inbox.D Start the camera.In lists, messages and menus:I Scroll upwards/downwards.During a conversation:H Open contacts.á £ ß01.06.2006 10:10Service providerInbox í New SMS
Phone overview14© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Overview.fmleft page (14) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 0601191 Integrated antenna 2 Loudspeaker3 [/\ Volume control4 Display5 * Ringtone•Press and hold in standby mode: switch all acoustic signals on/off (except alarm clock). • Press and hold during incoming call: switch off ringtone for this call only.6 # Key lockPress and hold in standby mode: activate/deactivate key lock.7 Plug socket8 Slot for RS MultiMediaCard1 Car Kit holder2 Camera lensá £ ß01.06.2006 10:10Service providerInbox í New SMS
15Display symbolsright page (15) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Displaysymbols.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Display symbolsDisplay symbols (selection)á Signal strengthà ChargingÞ Battery charge level, e.g. 50%L ContactsP Call recordsO Internet/Service provider portalW GamesQ OrganizerM MessagesR CameraS ExtrasV Media playerN My stuffU Alarm clockT SettingsÇ All calls are diverted½ Ringer (beep) off¹ Alarm setÄ Keypad lockedT9Abc Text input with T9£ Activated and available¢ Registered¤ Temporarily interrupted± Browser offline² Browser is being connected³ Browser online via GPRS´ No network (Internet)¬ Bluetooth: Device not visible© Bluetooth: Device visible ª Call accepted on Bluetooth device
Display symbols16© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Displaysymbols.fmleft page (16) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Events (selection) å SMS memory fullæ MMS memory fullç Phone memory fullÆ No network access¿ InboxÊ Memory assistantMessage symbols (selection)m Unreadn Reado Draftp Sentq MMS not sentr MMS notification receivedt MMS with DRM contents (page 21)v E-mail with attachmentl Voice mail receivedCamera symbolsÚ Zoom factorÛ White balance
17Getting startedright page (17) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Getting startedYour phone's display is covered with a protective film. Remove this before using the phone.Inserting SIM card/batteryThe service provider supplies you with a SIM card on which all the im-portant data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.• Place the SIM card in front of the slot with the contacts facing downwards. Then push the SIM card fully into the holder using gentle pressure 1. Ensure that the cut-off corner is in the correct position.• Insert the battery sideways into the phone 2, then press it down-wards 3 until it engages. • To remove, press the retaining tab on the side of the battery, then lift the battery out.In rare cases static discharge can cause temporary discolouration in the display. However, this will disappear within approx. 10 minutes. 132
Getting started18© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmleft page (18) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119• Place the battery cover on the phone slightly off centre 4 and then slide it until it clicks into place.• To remove, press the battery cover 5, and slide it off the phone 6.RS MultiMediaCard™• To insert, place the card in the card holder 1, ensuring the cut off corner is in the correct posi-tion. Push the card holder with the card into the phone until it clicks into place 2.• Press the small button to remove 3 (e.g. with a pin). The card holder will pop out a little and you can remove it.• Before removing the RS Multi-MediaCard, call up the Eject card function in the options menu for My stuff. This saves data you have not yet saved and avoids losing data.Additional informationPlease switch off your phone before re-moving the battery!1.8 and 3 volt SIM cards are supported. Please contact your service provider if you have a different card.465213
19Getting startedright page (19) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Charging the batteryChargingThe battery is not fully charged when delivered. Plug the charger ca-ble into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours (for charging via USB, see page 88). Do not interrupt the charging procedure prematurely.àDisplay when charging is in progress.Charging timeAn empty battery is fully charged af-ter about 2 hours. Charging is only possible within a temperature range of +5 °C to +40 °C (+41°F to +104°F). If the temperature rises/falls 5°C above/below this, i.e drops to 32°F or rises to 113°F, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded. Operating timeThe operating time depends upon the respective network conditions and conditions of use. Extreme tem-peratures considerably reduce the phone’s standby time. You should therefore avoid the leaving the phone in the sun or on a radiator.Talktime: up to 300 minutesStandby time: up to 300 hoursCharge icon not visibleIf the battery has been discharged fully, the charge icon is not immedi-ately visible when the power supply is plugged in. It will appear after up to two hours. In this case the battery is fully charged after 3 to 4 hours.Only use the plug-in power supply unit included in delivery!Display during operationCharge level display during operation (empty–full):Ý Þ ß A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly af-ter an uninterrupted charging/dis-charging cycle. You should therefore not remove the battery unnecessarily and where possible not terminate the charging process before completion.Additional informationThe power supply unit heats up when used for long periods. This is normal and not dangerous.If the battery is removed for longer than 30 seconds, the clock must be reset.
Switching on/off, PIN entry20© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmleft page (20) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Switching on/off, PIN entrySwitching on/offBPress and hold the On/Off/End key.Entering the PINThe SIM card can be protected with a 4to 8-digit PIN.JEnter the PIN using the number keys. The charac-ters **** appear in the display to ensure nobody can read your PIN. Correct with]. §OK§ Press the left softkey to confirm. Logging on to the network will take a few seconds.Emergency number (SOS)Only to be used in real emergencies!By pressing the left softkey §SOS§ you can make an emergency call on any network without a SIM card and with-out entering a PIN (not available in all countries).Switching your phone on for the first timeTime/dateSet the clock correctly once when getting started.ìConfirm.ñStart entry.JFirst enter the date (day/month/year), then the time (24 hours, in-cluding seconds).ìConfirm. The time and date are updated.Time zonesISelect the city in the de-sired time zone.ìConfirm.Additional informationChanging the PIN.........................page 25Clearing SIM card barring ............page 26
21General instructionsright page (21) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119General instructionsStandby mode The phone is in standby mode and is ready for use when the name of the service provider appears on the display.BPress the On/Off/End key to return to standby mode from any situation.Receiving signaláStrong receiving signal.âA weak signal reduces the call quality and may lead to loss of the connection. Change your location.Digital Rights Mgmt. (DRM)Remember that your phone has Digi-tal Rights Management. The use of downloaded pictures, sounds or ap-plications can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, number of times it can be used, etc. (page 81).User guideSymbolsThe following symbols are used to explain operation:J Enter numbers or letters.B On/Off/End key (red)A Call key (green)<> Softkeys§Menu§ Displays a soft-key function.C Press the centre key, for example, to call up the menu. D F E H I G Press the navigation key on the side marked with a triangle.= Function dependent on service provider. May re-quire special registration.
General instructions22© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmleft page (22) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Main menuThe applications are shown with symbols in the main menu:íCall up from standby mode using the centre key.F/ISelect application with the navigation key.ìStart application.Main menu options§Options§ Open menu.TabsThe handy tabs offer you fast access to information and functions.Navigation FSwitch between the indi-vidual tabs.If an input field is activated on a tab, it is only possible to navigate within the field using the navigation key. ITo switch to the next tab, quit the input fields by scrolling up or down. Search List output of the menu. En-tering letters will access a function directly.Large font Select one of two font sizes.Lighting Set display light brighter/ darker.Eject card Starts data backup before the RS MultiMediaCard is removed.Help Display a help text.231312
23General instructionsright page (23) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Menu controlsThe steps needed to reach a function are shown in a condensed form in the user guide, e.g. to display record of missed calls in condensed form:C¢P¢Missed callsThis comprises the following steps:íPressing the centre key opens the main menu in standby mode.GSelect the record application P.ìConfirm with the centre key.HSelect the Missed calls function. ìConfirm with the centre key.Centre keyThe symbol in the centre of the low-er line of the display shows the cur-rent function when the centre key is pressed.íMain menuìOK, confirmñChangeðCallüEdit÷InsertúOptionsùCameraýSendöViewûSaveòPlayôRecordóPauseõStopøZoom
General instructions24© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmleft page (24) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Standard functionsOption menusFunctions which appear repeatedly in the options menu are listed here.§Options§ Open menu.Printing via USBThis Mobile Printing Ready product is designed to provide easy printing from mobile phones by connecting the mobile phone to the printer with a USB data cable (first select Printö, then Via USB and then connect the USB cable).This product follows the Guidelines Version 1.0 for PictBridge from Mo-bile Imaging and Printing Consor-tium (MIPC).Mark modeFor some applications (e.g. deleting several SMS messages) you can highlight several entries on the tab in order to perform multiple func-tions at once. §Options§ Open menu.Mark text Activate mark mode. ISelect entry/entries.ñMark or unmark.Additional highlighting functions:§Options§ Open menu.Edit Open the entry to edit.View Display entry.Delete Delete entry.New entry Create new entry.SendöSelect transmission service and medium for sending.PrintöPrintout on a suitable termi-nal via, Bluetooth or USB.Reply/Reply to all The sender becomes the recipient, "Re:" is placed before the subject, and the received text is transferred into the new message.Save Store entry.Save to ªSave recipient in Contacts.Sort Set sort criteria (alphabetical, type, time).Rename Rename selected entry.Capacity Display memory capacity.Import Device ready to receive da-ta (vcard, vcal, vnotes) via Bluetooth.Attributes Display properties of the highlighted object.Help Display help text.Mark all Mark all entries.Deselect all Unmark all marked entries.Delete marked All marked entries are deleted.
25Securityright page (25) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119SecurityThe phone and SIM card are protect-ed against misuse by several security codes.PIN codeC¢T¢Security¢PIN code¢Select function. PIN controlThe PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not per-mit deactivating the control.ñEdit.JEnter PIN.ìConfirm entry.Change PINYou can change the PIN to any 4 to 8-digit number you find easier to remember.ñEdit.JEnter current PIN.ìConfirm.J,ìEnter new PIN.J,ìRepeat new PIN.Keep these security codes in a safe place where you can access them again if required. PIN Protects your SIM card (personal identification num-ber).PIN2 This is needed to set the charge detail display and to access additional functions on special SIM cards.PUKPUK2 Key code. Used to unlock SIM cards after the wrong PIN has been entered repeatedly.Phone code Protects your phone. Must be entered at the first security setting.
Security26© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Startup.fmleft page (26) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119C¢T¢Security¢PIN code¢Select function. Change PIN2Proceed as for Change PIN.Chg.phonecode(Change phone code)You define the phone code (4 to 8-digit number) the first time you call up a phone-code protected function (e.g. Direct call, page 84). It is then valid for all phone-code protected functions. If the phone code is entered incor-rectly three times, access to the phone code and the functions that use it is denied. If this happens please contact the Service Centre (page 119).Clearing SIM card barringsIf the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN) provided by your service provider with the SIM card in accordance with the in-structions. If the PUK (MASTER PIN) has been lost, please contact your service provider.Preventing accidental activationEven if PIN use is deactivated (page 20) confirmation is required to switch on the phone.This prevents the phone from being switched on accidentally, e. g. when carried in a pocket or whilst you are on an aircraft.BPress and hold. §OK§ Press. The phone switches on.§Cancel§ Press (or no further input) to stop switch-on proce-dure. The phone does not switch on.Connection with PCsYou can connect your phone to a PC using Bluetooth or a data cable (ac-cessory). The PC program MPM (Mo-bile Phone Manager) enables you to store data on your PC and, for exam-ple, synchronise the contacts with Outlook®, Lotus Notes™ and other BenQ-Siemens phones. You will find the Mobile Phone Manager on the CD-ROM supplied or you can down-load it from the Internet at: www.BenQ-Siemens.com/c81
27Text inputright page (27) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Text.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Text inputText input without T9Press the number key repeatedly un-til the required character appears. After a brief interval the cursor will advance. Example:2Press once briefly to write the letter a, twice to write b, etc. Press and hold to write the number.Ä, ä, 1–9 Umlauts and numbers are displayed after the relevant letters.]Press briefly to delete the letter before the cursor, press and hold to erase the whole word.FMove the cursor (forward/back).#Press briefly: swap be-tween abc, Abc, T9abc, T9Abc, 123. Status shown in top line of the display.Press and hold: all input variants are displayed.*Press briefly: special char-acters are displayed.0Press once/repeatedly:. , ? ! ’ " 0 + - ( ) @ / : _ Press and hold: write 0.1Inserts a space. Press twice: line break.Special characters*Press briefly. The symbols chart is displayed:1) Line breakI/FScroll to a character.ìConfirm.1)¿¡_;.,?!+- "’ : */()¤¥$£€@\ &#[ ] { } %~<=>|^` § Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω
Text input28© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Text.fmleft page (28) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Text input withT9"T9" deduces the correct word from the individual key entries by making comparisons with an extensive dictionary.Writing with T9The display changes as you proceed.It is therefore best if you finish a word without looking at the display.Simply press the keys once only where the relevant letter is located. For "hotel", for example:#Press briefly for T9Abc, then4 6 8 3 5 1A blank ends a word.Do not use special characters such as Ä. Use the standard characters in-stead, e.g. A; T9 will do the rest for you.T9 word suggestionsIf several options are found in the dictionary for a key sequence (a word), the most probable is dis-played first. If the word you want has not been recognised, the next sug-gestion from T9 may be correct.The word must be §highlighted§. Then press^The displayed word is re-placed with a different word. If this word is also incorrect, press again.^Repeat until the correct word is displayed.If the word you want is not in the dictionary, it can also be written without T9.T9® Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,187,480, 5,818,437, 5,945,928, 5,953,541, 6,011,554, 6,286,064, 6,307,548, 6,307,549, 6,636,162 and 6,646,573; Australian Pat. Nos. 727539, 746674 and 747901; Canadian Pat. Nos. 1,331,057, 2,302,595 and 2,227,904;Japan Pat. No. 3532780, 3492981;United Kingdom Pat. No. 2238414B;Hong Kong Standard Pat. No. HK1010924;Republic of Singapore Pat. No. 51383, 66959 and 71979; European Pat. Nos. 0 842 463 (96927260.8), 1 010 057 (98903671.0), 1 018 069 (98950708.2); Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; People’s Repub-lic of China Pat. Application Nos. 98802801.8, 98809472.X and 96196739.0;Mexico Pat. No. 208141;Russian Federation Pat. No. 2206118;and additional patents are pending worldwide.
29Text inputright page (29) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Text.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119To add a word to the dictionary:§Learn§ Select.The last suggestion is deleted and the word may now be entered with-out T9 support. Press §Save§ to add it automatically to the dictionary.Correcting a wordFMove left or right, word by word, until the required word is §highlighted§.^Scroll through the T9 word suggestions again.]Deletes the character to the left of the cursor and displays a new possible word!Additional informationWithin a "T9 word", individual letters may not be edited without first removing the T9 status. In most cases it is better to rewrite the complete word.0Set a full stop. The word is concluded if it is followed by a space. Within a word, a full stop represents an apostro-phe or hyphen:e.g. §provider.s§ = provider’s.EMoving the cursor to the right ends the word.#Press briefly: swap between: abc, Abc, T9abc, T9Abc, 123. Status shown in top line of the display.Press and hold: all input vari-ants are displayed.*Press briefly: select special characters (page 27).
Text input30© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Text.fmleft page (30) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Text templatesText modules can be stored in the phone for adding to your messages (SMS, MMS, e-mail). í¢M¢Templates¢Text templates§New§ Select.ìThe input field is opened.JWrite text, select with §Options§ or, if applicable, select input language, and copy or insert texts.ûSave text module.Using text templatesFrom text modules:í¢M¢Templates¢Text templatesISelect text template from the list.§Options§ Select Create message.ISelect the type of mes-sage in which the text module is to be used.ìConfirm. The text module is added.JComplete the message and send.From an application (SMS, MMS, e-mail)JWrite the text for the mes-sage in the application.§Options§ Open the text menu.Insert textöSelect, then Template.ISelect text module from the list.ìConfirm. The text module is added.
31Callingright page (31) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Phone.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119CallingDialling with number keysThe phone must be switched on (standby mode).JEnter number (always with area/international dialling code). ] A short press clears the last digit, a long press clears the entire number.APress the green Call key. The displayed phone number is dialled.Ending a callBPress the red End key briefly. Press this key even if the person on the other end of the line has hung up first.Setting the volume[ / \Adjust the volume with the plus/minus sidekeys (only possible during a call).If a Car Kit is used, its volume setting will not affect the usual setting on the phone.RediallingTo redial the phone number last called:APress the green Call key twice.To redial other phone numbers that were dialled previously:APress the green Call key once.IPick out the phone num-ber from the list, then press …A… to dial.International dialling codes0Press and hold until a "+" is displayed.§Options§ Open call menu.Country Press and select country.Phone number memoYou can enter a phone number during the call. The person to whom you are speaking can hear these entries. When the connec-tion has ended you can save or dial the phone number.
Calling32© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Phone.fmleft page (32) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119If the number is busyIf the called number is busy or can-not be reached because of network problems, several options are available (depending on the service provider). An incoming call or any other use of the phone interrupts these functions.Either Auto last number redial§Options§ Open call menu.Auto dial The phone number is au-tomatically dialled ten times at increasing time intervals. ìConfirm. End with:B End key.Or Call back b§Options§ Open call menu.Call back Your phone rings when the busy number is free. Press the Call key to dial the number. ìConfirm.Reminder§Options§ Open call menu.Reminder A beep reminds you to re-dial the displayed phone number after 15 minutes.Accepting a call The phone must be switched on. An incoming call will interrupt any other use of the phone.APress the green Call key.Or ðPress the centre key.A phone number transmitted by the network plus the corresponding name are displayed if they are stored in Contacts (page 39).Rejecting a call§Reject§ Press.Or BPress the red End key briefly. Warning!Please make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.
33Callingright page (33) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Phone.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119HandsfreeYou can put the phone down during a call. You can then hear the caller via the loudspeaker. §Options§ Open call menu.Handsfr. Activate/deactivate handsfree talking.ìConfirm.Swapping between 2 calls bEstablishing a second connectionYou can call another number during a call.§Options§ Open call menu.Hold The current call is put on hold. ìConfirm.JEnter new phone number or H call up Contacts or A open call records and select a phone number.When the new connection is established:§Options§ Open call menu.Toggle Swap between calls.ìConfirm.Incoming calls during a callYou may need to register for this ser-vice with your service provider and set your phone accordingly. During a call, you may be advised that there is another call waiting. You will hear a special tone during the call (page 79). You have the following options:•Accept the waiting call in addition to the first §Toggle§ Accept the waiting call and place the current call on hold. Always proceed as above to swap between the two calls.• Reject the waiting call§Reject§ Press. Or §Forward§ The waiting call is divert-ed, for example, to mailbox.•Accept the waiting call and end the current call BEnd the current call (red key).ðAccept the new call.Warning!Always switch off "handsfree talking" be-fore holding the phone to your ear. Other-wise you will damage your hearing!
Calling34© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Phone.fmleft page (34) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Ending callsBPress the red End key briefly. After the Return to held call? display, you have the following choice:§Yes§ You accept the call on hold.§No§ You end the second call too.Conference bYou can call up to 5 conference par-ticipants one after the other and then link them together in a confer-ence call. Some of the functions de-scribed may not be supported by your service provider or may have to be enabled specially. A connection has already been established: §Options§ Open menu and select Hold. The current connec-tion is maintained.H/JSelect phone number from Contacts or enter it manually. When the new connec-tion is established …§Options§ … open the menu and se-lect Conference. The held call is joined.Repeat procedure until all partici-pants are linked together (up to 5participants).EndingBAll calls in the conference finish simultaneously when the red End key is pressed.
35Callingright page (35) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Phone.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Call optionsThe following functions are only available during a call:§Options§ Open menu.Direct callIf this is active, only one number can be dialled.Switching oní¢T¢Security¢Direct callìConfirm selection.JEnter phone code.When first prompted you define and enter the phone code (4–8 digits). Please do not forget this code (page 26)! ìConfirm selection.H/JSelect phone number from Contacts or enter it manually. ìConfirm.Applying§Carol§ To dial the phone number (e.g. "Carol") press and hold the right softkey. Switching off#Press and hold.JEnter phone code.ìConfirm entry.Hold Hold current call.Microphone on If switched off, the person on the other end of the line cannot hear you (muting). Also: press * and hold.Handsfree Playback through the loudspeaker. Conference (p. 34)Time/charges Display talktime that has elapsed so far and (if set) cost incurred during the call.Send DTMF Enter tone sequences (numbers) for remote in-quiries to an answering machine.Main menu Access to main menu.Call transfer = Connect the original call to a second call. For you, both calls are now ended.Call status List all held and active calls (e.g. participants in a conference).
Calling36© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Phone.fmleft page (36) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Tone sequences (DTMF)You can, for example, enter tone se-quences (digits) for remote access to an answering machine during an ex-isting connection. These entries are transmitted directly as DTMF codes (tone sequences).§Options§ Open menu.Send DTMFSelect.JEnter phone number.ìConfirm.Using ContactsStore phone numbers and tone se-quences (DTMF tones) in Contacts in the same way as a normal entry.JEnter phone number.0Press until a "+" appears in the display (wait for the connection to be established).JEnter DTMF tones (digits).0If necessary, wait again for three seconds at a time for the receiver to process the entries correctly.JEnter a name.§Save§ Save entry.You may also store just the DTMF tones (digits) and then send them during the call.
37Contactsright page (37) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Contacts.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119ContactsC¢L You can store up to 2500 entries in this phone directory, with several phone and fax numbers plus addi-tional address details. For fast access, the contacts and functions are sorted and offered on five tabs:All contacts, Groups, Online status,SIM, Filter HOpen Contacts (fast ac-cess in standby mode).FSwitch between the individual tabs.CommunicationISelect contact.ACall selected contact.Or §Options§ Open menu, then Create message to start an mes-sage dialogue.All contactsDisplay all entries stored in the phone or on the SIM card in alpha-betical order.New entryìConfirm New entry. The tabs for creating the entry are displayed.FSwitch between the individual tabs.The following tabs are offered:General sett. First name, surname and im-portant phone numbers. A ringtone, a picture, or video with sound can be assigned to each contact.Private General address information and additional communica-tion numbers such as fax and e-mail.Business Company information, ad-dress, communication numbers.Person Personal details such as date of birth, group membership and other notes.Online status Contact information for In-stant Messaging (page 59).
Contacts38© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Contacts.fmleft page (38) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119In the respective tabs:ISelect required input fields.JFill in input fields. The maximum number of characters available is shown at the top of the display. At least one name or one company must be en-tered. Always enter phone number with dialling code. úOpen options menu and select Save.Viewing/editing entriesISelect required entry.FSwitch between the individual tabs.üOpen current tab to edit.úOpen options menu.GroupsYou are offered 10 different groups to enable you to arrange your con-tacts clearly. You can edit the names of groups as you wish.Editing group attributesISelect group.§Options§ Open menu and select Attributes. You can make the following changes:Name:, Ringtone:, Picture: Adding a contactContacts may be added to a group via All contacts.ISelect contact, open §Options§ and selectAdd to group.A contact can only belong to one group. Online statusDisplay all contacts for whom a Instant Messaging address (WV address) is entered.SynchronisationThe MPM (Mobile Phone Manager, page 112) allows you to manage contacts using PCs.
39Contactsright page (39) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Contacts.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119SIMDisplay all contacts stored on the SIM card. New entryìConfirm New entry, enter name and phone number, and select the storage lo-cation (SIM/protected SIM).Viewing/editing entriesISelect required entry.üEdit entry.Editing menu§Options§ Open menu.FilterThose entries which match the se-lected filter criteria are displayed, e.g. those containing a picture.Add more fields Move SIM card entry to the phone memory. Now all tabs are offered for further entries. from contacts Copy entry/entries from the phone memory to the SIM card (reduced information).Change Location: SIM/Protected SIM. On special SIM cards, phone numbers can be stored in a protected loca-tion. PIN2 is required for editing.Record #: Select an unassigned number for the entry. It can be used to dial the phone number. (For standard functions see page 24)Most used (default)URL Birthday Pictures Ringtones E-mail
Contacts40© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Contacts.fmleft page (40) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119General functions§Options§ Different functions are of-fered depending on the tab and the current situation.MoreLocationSwitch the storage location of en-tries between the phone memory and the SIM card.Synchronizatn.You can synchronise your mobile with an organiser stored on the Internet (Remote sync., page 95).CapacityDisplay memory capacity.SettingsFilter Only those entries which match the filter criteria are displayed.Create message Create a message for a selected contact (SMS, MMS, e-mail, Instant Message). Search ID Search for assigned In-stant Message ID.Internet The URL assigned to the contact is visited via the WAP browser.Open Display phone numbers for information.Add to group Add entry to a group.Take a photo, Record video, Record sounds, etc.Create picture, video and sound information for a contact from scratch or add from My stuff.More See below.(For standard functions see page 24)Sort byöFirst name or surnameSpec. numbers Display special phone numbers, yes/noDefault remind. time: Period of time you want to be reminded ahead of a birthday entry.Display name First name or surname is displayed.Field setup Setup for fields on a tab.Entry Tab: Tab that is to be shown first.
41Contactsright page (41) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Contacts.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119As business c.Define a selected contact as a business card.Business cardEstablish a contact as your own business card to send to a different GSM-phone. ImportSet up readiness to receive via Bluetooth.Add more fieldsMove SIM card entry to the phone memory. Now all tabs are offered for further entries.ConferenceAStart a conference with up to five particpants highlighted in advance. The contacts are dialled one after another.
Call records42© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Records.fmleft page (42) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Call recordsA caller's phone number is displayed if • the caller has switched off the Hide ID function and• the network supports the "Caller Identity" function.Alternatively, a caller’s name is dis-played if it is stored in Contacts.Your phone stores the phone numbers of calls for convenient redialling.C¢P ISelect record.COpen record.ISelect phone number.ADial phone number.Or öDisplay information on the phone number.Up to 500 entries are stored in the records:Missed calls bThe phone numbers of calls made to your phone but not answered are stored for call back purposes.¿Symbol for missed call (in standby mode). Press the softkey beneath the symbol to bring up the inbox. Calls receivedAccepted calls are listed. Calls dialedAccess to the last numbers you have dialled.AFast access in standby mode.Delete recordsThe records are deleted.
43Time/chargesright page (43) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_TimeCharge.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Time/chargesYou can display the charges and du-ration during a call. You can set a unit limit for outgoing calls.C¢P¢Time/chargesLast call All outg. calls All incom. calls Remain. units ISelect display.COpen area.Time/charges optionsúOpen menu.Charge settingsCurrencyEnter desired currency.Charge/Unit (PIN2 prompt)Enter the currency used as well as the charge per unit and time.Account limit (PIN2 prompt)Special SIM cards allow you or the service provider to define a credit limit after which the phone is barred for outgoing calls.ñPress.JEnter PIN2.Account limitActivate.JEnter number of units.§Options§ Open menu, then select Save.Auto displayCall duration and charges are dis-played during and after a call if a personal rate is set.Reset Reset the currently select-ed setting.Reset values Reset all settings.Charge settings Call up the menu (see below).
Camera44© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Camera.fmleft page (44) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119CameraA camera is integrated in the phone. Take photos / record videos and • use photos as wallpaper, a logo, screensaver or startup and shut-down animation• assign a photo/video to a contact• send photos/videos via MMS or e-mailSave photos and videos in My stuff (page 109) or on the RS MultiMedia-Card (page 111).Switching onC¢R FSwitch between the Take a photo and Record video tabs.The current (preview) image is dis-played. You will see the following in the first line from left to right:ÚZoom factor.ÙNight mode.ÛWhite balance.The number of photos that can still be taken in the selected resolution is displayed in the preview image. This number varies considerably depend-ing on the subject matter and how much storage space is required. You will also see an indication of the selected resolution or, if video mode has been selected, there is an indica-tion as to how much recording time has already been used and the maxi-mum time still available.Take a photoùTake a photo. A beep is heard as the photo is tak-en (this cannot be deacti-vated).I If necessary, set the zoom factor first.The photo is saved with a name, the date and the time in the Pictures (page 111) folder in My stuff. To rename, see the camera options.Image resolutionIt is possible to set the quality of the image regardless of the preview im-age resolution. The best possible res-olution is 1280 × 960 pixels.To take individual wallpaper images you need to set Background as the im-age resolution in the options.The resolution may decrease depend-ing on the selected digital zoom.
45Cameraright page (45) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Camera.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Record videoThe video mode resolution is the same as the preview image resolution.ôStart video recording.A red dot appears in the top right of the display while the video recording is being made. õEnd video recording.The video is saved with a name, the date and the time in the Videos folder (page 111) in My stuff. Video resolutionIt is possible to set the quality of the image for a video regardless of the preview image resolution. The best possible resolution is 176 × 144 pixels.Camera optionsThe following functions are avail-able, depending on the current situation.§Options§ Open menu.Memory assis. If there is insufficient memory available the memory assistant is started.Pictures Display list of photos.Other videos Display list of videos.Microphone on Switch microphone on or off.Settings • Name for recordings• Video resolution• Image resolution• Brightness• Colour mode• Night mode for poor lighting conditions• ISO sensitivity• Autotimer delay in seconds• Location: My stuff (page 109) or RS MultiMediaCard (page 111).Frame Selection of various decorative frames.Auto-timer Set camera to take photo after a defined period of time.White balance Choose between: Automatic, Indoor, Outdoor (For standard functions see page 24)
SMS/MMS46© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmleft page (46) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119SMS/MMSYou can use your phone to send and receive text messages and MMS (Multimedia Messaging Service) messages.Information about SMSYou can use your phone to transmit and receive very long messages (up to 760 characters). They are auto-matically composed of several "nor-mal" SMS messages (note higher charges). Using special letters in some languages reduces the maxi-mum possible length of an SMS. If you do not wish to use these letters, please change the input language in the options menu. Information about MMSThe Multimedia Messaging Service enables you to send texts, pic-tures/videos and sounds in a com-bined message to another mobile phone or to an e-mail address. All el-ements of an MMS message are merged to form a "slide show".Depending on your phone's settings, you will receive either the complete message automatically or notifica-tion that an MMS has been saved in the network, giving sender and size details. You may then download it to your phone to read it. Ask your service provider whether this service is available. You may have to register for this separately. Writing an SMS C¢M¢Create new¢SMSJEnter text. You will find information on writing texts with and without T9 in the chapter "Text input", (page 27). AEnter phone number or ú open menu, then se-lect Add from †, select re-cipient from Contacts. You can add more than one.AStart sending process.Additional informationThe following is displayed in the uppermost line: text input status, number of SMS mes-sages required, number of characters still available for the current SMS.If the length of the text exceeds 760 char-acters, the message is converted into an MMS.
47SMS/MMSright page (47) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119SMS optionsDifferent functions are offered for editing an SMS depending on the se-lected part of the message.§Options§ Open menu.Writing an MMSC¢M¢Create new¢MMSLayoutAn MMS may comprise a series of pages. Each page may contain a text, a picture/video and a sound. Re-member that pictures and sounds may be protected (DRM, page 21).For functions related to this see MMS options, page 48.ContentsJEnter text. Add addressee Add recipient.Add from †Add a recipient from Contacts.Remove recip. Remove recipient.Save as draft Store the SMS as a draft.Text Edit menu Input language, Mark text, Copy, Insert Send optionsöSee page 51.Insert textöTemplate (page 30)SignatureOpen. sentenceContact detailsBookmark Emoticons Insert small symbols (smileys), page 53Add itemöWhen melodies, pic-tures, videos or anima-tions are added the SMS is converted into an MMS (page 47).Remember that these may be protected (DRM, page 21).Create itemöTake a photo/Record video Start camera (page 44).Record soundsStart sound recorder (page 100). SMS will be converted to MMS.(For standard functions see page 24)
SMS/MMS48© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmleft page (48) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119úOpen menu, then select Add item/Create item.TextYou will find information on writing texts with and without T9 in the chapter "Text input" (page 27). Pictures/VideosAdd pictures and videos from My stuff or take new ones with the camera.AudioAdd melodies from My stuff or record new ones with the sound recorder.Contacts Add address data from Contacts.AttachmentAdd any files from My stuff.SendingAEnter phone number or ú open menu, then se-lect Add from †, select re-cipient from Contacts. You can add more than one.If you want to insert a subject:Open menu, then select Add Subject: and enter a brief description of the MMS.AStart sending process.MMS optionsDifferent functions are offered for editing an MMS depending on the selected part of the message.§Options§ Open menu.Save as templ. Save MMS as a template.Add addressee Add recipient.Add from †Add a recipient from Contacts.Remove recip. Delete recipient.Add Subject: Add subject field.Add itemöAdd contents.Create itemöTake a photo/Record video Start camera (page 44).Record soundsStart sound recorder (page 100).Preview MMS Play entire MMS in the display.Save as draft Store the MMS as a draft.Text Edit menu Input language Mark text Copy Insert Send optionsöSee page 52.
49SMS/MMSright page (49) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Receiving/readingA new incoming message is dis-played (m) in standby mode.¿Use the softkey under-neath to open the Inbox.Or C¢M¢InboxISelect the required message.öRead the message or the notification about an MMS.To receive a complete MMS later on: §Options§ Then select Retrieve MMS.Inbox optionsDifferent functions are offered de-pending on the situation.§Options§ Open menu.Insert textöTemplate (page 30)Signature Open. sentence Contact details Bookmark Emoticons Insert small symbols (smileys), page 53.Page duration: Adjust the time the page will be displayed.Delete Page Delete currently edited page.View pictures/ Play sound Play back animations and melodies with the media player.Open attach. Play back attachment with the media player.(For standard functions see page 24)View Read the SMS/MMS or the notification about an MMS.Reply/Reply to all • With new SMS.• With new MMS.• Quoted original: new SMS with the sender as recipient and the first 50 characters of the received message.Forward Forward message to another recipient. If wished, additional con-tents can be added to an MMS.(For standard functions see page 24)Additional informationPlus/minus keysAdjust volume.*Activate/deactivate sound.For MMS only:IScroll up/down within a page.EJump to next page and return at end to first page.DJump to the start of a page or to the previous page.
SMS/MMS50© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmleft page (50) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Read optionsDifferent functions are offered de-pending on the situation.úOpen menu.DraftC¢M¢Draft¢SMS/MMSThe list of drafts is displayed. Mes-sages you have not yet finished can be saved as drafts. OutboxC¢M¢Outbox¢SMS/MMSThe list of messages not sent is dis-played. Failure may be caused by loss of network connection. SentC¢M¢Sent¢SMS/MMSThe list of messages sent is displayed.Msg. archiveí¢M¢Msg. archive¢SMS/MMSMessages are saved in the archive. Select the list and read required message(s).You can move important messages to the archive with §Options§,Move to archiv..Save picture/Save sound Allows you to save se-lected pictures, videos or sounds on the phone.Play Play back MMS.Pause Pause playback of an MMS.Select Opens submenu for Call, Save to contact, Open link, etc. depending on the text selection.Open link Starts the WAP browser (page 67).Open item The contents of the MMS are listed for playback with the media player or for saving.Save item The contents of the MMS are listed for saving in the relevant folder.Open attach. Open an attachment.Save attach. Opens the relevant folder in My Stuff for saving. Move to archiv. Moves the selected mes-sage to the archive.(For standard functions see page 24)
51SMS/MMSright page (51) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Templatesí¢M¢Templates¢MMS templates/Text templatesMMS templatesMMS templates are messages saved without an address. They can be sent as a whole or as part of a new MMS. ISelect MMS template.ýPrepare message and send.Text templatesSee page 30.SMS settingsí¢M¢Settings¢SMS¢Select function. Send optionsCreationMessage center Enter the phone numbers for the service centre as provided by the service provider.Default recipi. Enter recipient's name as the default for all SMS messages.Transm. rpt. Request delivery confirmation.Validity period Period in which the service centre is to try to deliver the message.SMS via GPRS SMS messages are sent via GPRS.Direct reply = If activated, the reply to your SMS message is handled via your service centre (for information, please contact your service provider).Add signature A "signature" is attached to each SMS. Choose be-tween: Never, Always, New messages Signature Create signature.Add open. sent. An introductory sentence or salutation is placed at the beginning of each SMS. Choose between: Never, Always, New messages Open. sentence Create introductory sentence.Message type May be set by the service provider. Default: Standard text: Normal SMS message.
SMS/MMS52© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmleft page (52) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119MMS settingsí¢M¢Settings¢MMS¢Select function. Send optionsCreationRetrievalTransm. rpt. Request delivery confirmation.Read report Request confirmation that the message has been read.Validity period Period in which the service centre is to try to deliver the message:Delivery time Set the time for delivery.Hide number Hide sender's phone number.Create mode Free, Limited, Warning Max. msg. size Unlimited, 95 kB, 295 kB Page duration Default lifespan of a page in seconds.Add signature A "signature" is attached to each MMS. Choose between: Never, Always, New messages Signature Create signature.Add open. sent. An introductory sentence or salutation is placed at the beginning of each MMS. Choose between: Never, Always, New messages Open. sentence Create introductory sentence.Retrieval Automatic: the whole MMS is saved.Limited: only the notification is saved.Retriev.(roam.) Receive when outside your home network.Reject anonym. Reject anonymous messages.Allow deliv. rep. Permit delivery report.Allow read rep. Permit confirmation that the message has been read.Allow advertise. Permit receipt of advertis-ing material.
53SMS/MMSright page (53) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_SMS-MMS.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Connectiv. set. Select the required MMS profile in which the connection attributes are specified (page 76). You can obtain the data you need for this from the service provider or at: www.BenQ-Siemens.com/mobilesettings Zoom inYou can select one of three specified text sizes for presenting a message.EmoticonsEmoticons are small symbols (smileys) with which you can show your feelings in pictorial form. You can set whether the emoticons are to be displayed as graphics or made up of special text charac-ters.Insert Emoticons into message with §Options§, Emoticons.I/FSelect symbol.ìInsert at the cursor position.You can set whether the emoticons are to be displayed as graphics or made up of special text characters ;-).Save aft. sendConfigure whether messages are saved in the Sent list after sending.
E-mail54© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Email.fmleft page (54) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119E-mailYour phone has an e-mail program (client). You can use it to create and receive e-mails.Writing/sendingC¢M¢Create new¢E-mailJEnter text. You will find information on writing texts with and without T9 in the chapter "Text input", (page 27). AEnter e-mail address or ú open menu, then se-lect Add from †, select re-cipient from Contacts. You can add more than one.Add Subject§Options§ Open menu, then select Add Subject: and enter a brief description of the e-mail.Add additional address fields§Options§ Open menu, then select Add Cc: or Add Bcc: and add additional recipients (see above).Add attachments§Options§ Open menu, then select Attach item. Select any file from your phone to add as an attachment.ASend e-mail.Write/send optionsDifferent functions are offered de-pending on the situation.úOpen menu.Text Edit menu Input language Mark text Copy Insert Add addressee Add a recipient.Add from †Add a recipient from Contacts.Attach itemö•My stuff: Open to make a selection. Re-member that pictures and sounds may be protected (DRM, page 21).•Take a photo/Record video: Start camera. •Record sounds Start sound recorder.•Contacts: Open to make a selection.
55E-mailright page (55) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Email.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Receiving/readingC¢M¢InboxSelect the E-mail tab. Before an e-mail can be read, it must be retrieved from the server. úOpen menu, then select Retrieve e-mail or Ret. con-tent.ISelect the required message.öRead message.OptionsúOpen menu.Add Subject: Add subject line (max. 255 characters).Add Cc: Add address(es) of copy recipient(s).Add Bcc: Add address(es) of copy recipient(s) who are not visible to the other recipients.Remove attach. Remove attachment from e-mail.Open attach. Open selected attachment.Insert textöTemplate (page 30)Signature Open. sentence Contact details Bookmark Save as draft Store the e-mail as a draft.Emoticons Insert small symbols (smileys), page 53.Send optionsö•Transm. rpt.Request delivery confirmation.•Read report: Request confirmation that the message has been read.•Priority: Medium, High, Low (For standard functions see page 24)Reply/Reply to all/Forward Send reply or forward e-mail.Ret. content Retrieve the contents of downloaded e-mail headers.Save attach. Store e-mail attachments in My stuff (page 109).Select Open submenu Call, Save to contact, Open link, etc. depending on the text selection.Save to ªStore sender in Contacts.Move to archiv. Move e-mail to archive.(For standard functions see page 24)
E-mail56© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Email.fmleft page (56) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119DraftC¢M¢Draft¢E-mailThe list of drafts is displayed. SentC¢M¢Sent¢E-mailThe list of messages sent is displayed.OutboxC¢M¢Outbox¢E-mailThe list of messages not sent is dis-played. Failure may be caused by loss of network connection.Msg. archiveí¢M¢Msg. archive¢E-mailMessages are saved in the archive. Select tab and read required message(s).You can move important messages to the archive with §Options§,Move to archiv..Settingí¢M¢Settings¢E-mail¢Select function. General sett.General settings for receiving and sending.Download option Download either complete e-mails or only the header to save download costs.Size limit Limit size for receiving an e-mail in KB.Copy on server Leave copy of e-mail on the server.Delete option Delete e-mail on phone only or also at the server.Add signature A "signature" is attached to each e-mail. Choose between: Never, Always, New messages Signature Create signature.
57E-mailright page (57) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Email.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Connectiv. set.You can obtain the necessary data to set the server access and your e-mail parameters from your service provid-er or at: www.BenQ-Siemens.com/mobilesettings Change active profileñPress.FSelect the new profile.ìActivate.Change profile settingsISelect the fields to edit.§Options§ Open, then select Save.Connect. list List of preferred accesses.User name: Your name.E-mail address: Your e-mail address, e.g.: name@domain.abcReply address: E-mail address where replies to your mails will be sent.User ID: User ID for your e-mail account.Password: Password for your e-mail account.POP3 server: Enter Internet address if the server type is POP3 and SMTP.POP3 port: (Default: 110)SMTP server: Enter Internet address.SMTP port: (Default: 25)SMTP authentic.: Set if separate authenti-cation for SMTP server is required.SMTP User ID: Separate User ID for SMTP authentication. Only if SMTP authenti-cation is set.SMTP password: A user password will be required if "Authentica-tion" is set to Yes.
WAP push58© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_WAPPush.fmleft page (58) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119WAP pushWAP push messages are transmitted from special service centres. If, for example, you have requested con-figuration data from your service provider this will be transmitted via WAP push.A new incoming message is dis-played (m) in standby mode.¿Use the softkey under-neath to open the Inbox.Or C¢M¢WAP pushISelect the required message.öRead the message or in-formation about the transmitted data/pro-grams and, if applicable, start a download.Inbox optionsDifferent functions are offered de-pending on the situation.§Options§ Open menu.SettingsC¢M¢Settings¢WAP push§Options§ Open menu, then select Settings.Execute Execute program.Install Start installation.Accept/Reject Accept/reject message.Settings Call up settings.Allow push Settings to receive WAP push messages: Allow specific, Allow none, Allow all If Allow specific has been set, the following lists may be edited.Accept list All messages from senders included in this list are ac-cepted (max. 20 entries possible).Reject list All messages from senders included in this list are au-tomatically deleted (max. 20 entries possible).Unk. address Handling of messages from senders are neither in the Accept list nor the Reject list: Reject, Delete
59Chat roomright page (59) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Instantmsg.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Chat room bYou can chat on your phone or PC with dialogue partners who are also registered for this service. Your part-ners are entered in contact lists for this and selected from them for a pri-vate or group dialogue. Similarly, you can be invited to a dialogue by other subscribers. (IMSG = Instant Messaging)GPRS must be switched on. Start menu (offline)If Autom. login is activated the main overview is displayed immediately.C¢M¢Chat roomLogin Start to make a connection.Account The access settings are normally preconfigured. If necessary, enter User ID: and Password: to activate access.Please contact your ser-vice provider if you do not have access data.Online statusCall up the Presence Manager to set your per-sonal attributes (page 99).Saved convers.Access to permanently saved dialogues.Conversa. hist.Read all dialogues from the last session offline (deleted next time you log in).Settings Settings for applications and servers.Automatic login: Select your preferred log-in procedure: e.g. manual or when the phone is switched on.Timeout: Set the timeout in min-utes after which Chat room is put in the background if no action is taken. The session continues and can be called up again via the menu. Pop-up info: Activate/deactivate popu-ps for new messages or change the online status, for Chat room only, if the application is visible.
Chat room60© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Instantmsg.fmleft page (60) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Main overview (online)After you have logged in successful-ly, depending on your service provid-er you will see up to 5 tabs as de-scribed below:Conversations IM contacts IM groups Info messages Saved convers. (IMSG = Instant Messaging)ConversationsThe following are shown in the list:• Online contacts in ongoing conversation.• Offline contacts with unread messages.•Joined groups.Starting a dialogueISelect an entry (individual contact or group) for a dialogue.ìStart dialogue.Dialogues that have taken place previously are displayed.Navigation:IScroll in the dialogue.FSwitch between different dialogues.Dialogue:ü/JWrite text.ýSend text. Of course you can also receive mes-sages from contacts you do not know. This will be pointed out to you in the display, and you can either switch to the dialogue or block the contact.Options§Options§ Open menu.Different functions are offered de-pending on the selection and situation:Contact details Additional information about the contact.Group details Additional information about the group.Online status Set your personal attributes (page 99).Add member Add a new member. Find member Look for member.
61Chat roomright page (61) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Instantmsg.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119IM contactsDisplay the contact list last used and, if applicable, entries from Contacts with Instant Message ID.ISelect an entry in a con-tact list for a dialogue.ìStart dialogue.At the end the offline con-tacts are displayed, visual-ly separated and in alphabetical order.IM contacts options§Options§ Open menu.Different functions are offered de-pending on the selection and situation:Invite Invitation to the contacts in your own group to join the dialogue.Delete member Delete contact from the list of members.IM contact Save contact in the cur-rent contact list on the server.Settings Settings for auto login.Block contact No more messages are received from the contact and the contact receives no status information from you. Message to ID Enter ID manually.Logout The session is ended and the start menu displayed.Only the display is ended with §Exit§ or the B end key.The session continues in the background. New messages are stored in the Inbox. To continue the dialogue, open the application again via the main menu.(For standard functions see page 24)Add contact User ID: Enter a unique user (log-in) name.Display name:Enter your own nickname for the contact.Find contact Look for the contact in the contact lists.Block contact No more messages are received from the contact and the contact receives no status information from you. Delete contact Delete contact from the list.
Chat room62© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Instantmsg.fmleft page (62) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119IM groupsDisplay all groups created by you or in which you are yourself a member.Hold dialogue as for IM contacts.IM groups options§Options§ Open menu.Different functions are offered de-pending on the selection and situation:Contact lists Display your personal contact lists.Create new contact list:select New entry and assign an ID and a name.Block list Display the list of rejected contacts.For further functions see page 60.Invite Invite the contacts in your own group for Inst. Message.Add member Add new group member. Find member Search for group member.Delete member Delete contact from the group member list.Add group Add new group.Find group Search for group on the server (also groups no longer managed in the list). Create group Group ID: Enter an unique group name.Name: Name of group.Topic: Topic of group.Searchable: Other people can look for the group.Welcome message: Enter own greeting.Type:Restricted or open.Create group Delete group.Screen name My name for group dialogue.For further functions see page 60.
63Chat roomright page (63) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Instantmsg.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Info messagesDisplay messages such as invitations to a group, server messages or other system messages.öDisplay selected message.Or öReply to invitation/requests.To reject, open §Options§ menu and select Deny.Saved convers.Display permanently saved dialogues.öDisplay selected dialogue.Saved dialogues can be renamed or deleted via the §Options§ menu.
Voice mailbox/Mailbox64© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Mailbox.fmleft page (64) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Voice mailbox/MailboxC¢M¢Voice mailboxMost service providers provide a mailbox in which a caller can leave voice mail for you• if your phone is switched off or not ready to receive,• if you do not want to answer,• if you are making a phone call (and if Call waiting, page 79 is not activated).If the voice mail service is not part of your service provider's standard package, you will need to register for it, and possibly set it manually. The following sequence may vary from service provider to service provider.Settings bThe service provider supplies you with two phone numbers:Save mailbox numberCall this phone number to listen to the voice messages left for you. C¢M¢Voice mailboxL/JSelect phone number from Contacts or enter/ change it manually. §OK§ Confirm.Save call divert numberCalls are diverted to this phone num-ber. í¢T¢Call settings¢ForwardISelect condition, e.g. Unanswered.ñConfirm change, then se-lect Set.JEnter phone number.§Options§ Open, then select Save.Listen bOne of the following symbols will ap-pear when you receive a new voice message:lSymbol plus beep.Or mNotification via SMS.Or You receive a call with an automatic announcement.Call your mailbox and play the mes-sage(s) back.1Press and hold (if neces-sary enter mailbox num-ber once only). Confirm with §OK§ and §Mailbox§ de-pending on your service provider.
65CB servicesright page (65) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_CB.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119CB servicesC¢M¢CB servicesSome service providers offer infor-mation services (info channels, Cell Broadcast). If reception is activated, you will receive messages on the ac-tivated topics in your Topic list. CB messages are displayed in stand-by mode; longer messages are scrolled automatically.Receive CBñActivate/deactivate CBser-vice. If the CB service is ac-tivated, standby time for the phone will be reduced.Read new CBìAll new messages are dis-played in chronological order.Topic listAdd up to 10 topics to your personal list from the topics index. Requirements: Use Topic index is acti-vated and the service provider sup-ports the function.ñActivate/deactivate topic.öDisplay message on cur-rent topic if any received.New topic Add to topic list.• If the topic index is available, se-lect a topic from it and confirm.• Create a new topic. Enter topic name and channel number. Open §Options§ menu and select Save.Auto displayñChoose to display:no messages, all messag-es, or only all new messages.Use Topic indexñActivate/deactivate use of the topic index.CB languagesReceive Cell Broadcast messages in just one language, in several, or in all languages.DisplaysÖ, ÕTopic activated/deactivated.mNew messages received on the topic.nMessages already read.
Internet66© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Internet.fmleft page (66) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Internet í¢O¢Internet¢Select function. Get the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can visit wap.BenQ-Siemens.com ("Down-loads") where you can download or update games, applications, sounds, graphics and more for your phone. Internet access may require registra-tion with the service provider.Access to the service providerDirect call-up of the browser with the URL from your service provider.Download wiz.Offers you support when down-loading.Enter URLOn inputting a URL the browser is started and the entered page displayed.BookmarksDisplay URL/call up pageList bookmarksDisplay list of bookmarks stored in the phone.ISelect bookmark.ìCall up URL.SavingBookmark siteThe current page is saved in the phone as a bookmark.Bookmark options§Options§ Open menu.Here you will find functions for changing and managing bookmarks and their folders. This includes edit-ing individual entries with the corre-sponding URLs as well as deleting and moving them to other folders.
67Internetright page (67) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Internet.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Internet Calling the function opens the browser with the preset option. Browser menu§Options§ Open menu.End connectionBPress to end the connec-tion and close the browser.Navigation in the browserDisplay symbols in the browser (selection)Enter special characters*, 0Select important special characters. Homepage Call up the preset homep-age of the current profile.Bookmarks •List bookmarks Dis-play list of bookmarks stored in the phone. •Bookmark site The cur-rent page is saved as a bookmark.Go toöEnter URL to dial an Inter-net address directly, e.g. wap.BenQ-Siemens.com Reload Reload current page.Show URL Display the URL of the page currently loaded for sending via SMS/MMS/e-mail.History Display most recently vis-ited Internet sites.Disconnect Disconnect the Internet.File Save the object on the current page or the com-plete page; display saved pages.Settings Set or reset browser.Exit browser Close the browser (page 68).ì • Select a link.• Settings, status on/off.§Back§ • Go back a level.I • One input field/link forward/back.• Scroll one line.² Connect ´ No net-work³ GPRS online ± Network
Internet68© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Internet.fmleft page (68) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Browser settingsC¢O¢Internet§Options§ Open menu.Settings Select.Connection settingsHandling depends on the service provider (see page 76).HistoryDisplay most recently visited Internet sites.Saved websitesDisplay list of pages stored in the phone.Browser Set start option as well as handling of pictures and sounds plus send options.Protocol parameters Set protocol parameters, push messages and abort time as well as handling of cookies.Security Set encryption.Context Reset session; delete cache, history and cookies.Your Internet browser is licensed by:
69Settingsright page (69) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119SettingsProfilesC¢T¢ProfilesSeveral settings can be stored in a phone profile so that the phone can be adapted, for example, to the sur-rounding level of noise.• Six profiles are provided with de-fault settings. These can be changed, however: General Silent alert Meeting Outdoor Car Kit Headset • You can name two personal profiles (<Name>).Switching onISelect default profile or personal profile.ìActivate the profile.Changing profile settingsEdit a default profile or create a new personal profile:ISelect profile.§Options§ Open menu.Change sett.Select.The list of available functions is displayed.When you have finished setting a function, you return to the profile menu where you can change a further setting.Additional information• To call up the list in standby mode:G profile list is displayed.• The active profile is identified with ·.
Settings70© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (70) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Profile options§Options§ Open menu.Car Kit If an original car kit is used, the pro-file is switched on automatically when the phone is connected to the Car Kit (see Accessories, page 139). HeadsetThe profile is only switched on auto-matically if an original headset is used (also see Accessories, page 139).Activate Activate selected profile.Change sett. Change profile settings.Copy from Copy settings from anoth-er profile.Rename Change personal profile (except default profiles).
71Settingsright page (71) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Ringtonesí¢T¢Ringtones¢Select function. VolumeSet the volume for all tones.ISet the volume.ìConfirm setting.You can also make individual set-tings for the following functions:•Calls •Messages •Organizer •Alarm clock •Chat room •Games •Shutdown tune •Startup tune •Sound recorder (record your own ring-tones (page 100).Different options are available de-pending on the function:TunesISelect a ringtone from My stuff.Ringer settingRing Play back the ringtone or melody at the set volume.Ascend Set ringtone to a rising volume.Beep Reduce ringtone to a short beep.Off Deactivate all tones for the function concerned.
Settings72© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (72) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119TopicsC¢T¢TopicsLoad a completely new visual pre-sentation onto your phone. Various media settings are reorganised on a theme basis at the press of a key, e.g. •Animations •Sounds •Color skins •Background Theme files are compressed to save memory space. On activation, Theme packages are extracted and registered automatically. Anima-tions, Sounds and Pictures are placed in My stuff in their correspond-ing folders.Activating a new themeISelect theme.ìActivate; if required, view §Preview§.Displayí¢T¢Display¢Select function. BackgroundSet wallpaper graphic for the display.LogoChoose picture to be displayed in-stead of the provider logo.ScreensaverAfter a set time, the screensaver shows a picture in the display. An in-coming call and/or pressing any key will end the function except if the code security with the telephone code is activated. PreviewDisplay the screensaver.Style:Choose between: Standard, Digital clock, Analog clock, Picture, Energy saving, Off. Picture:Select image in My stuff.Timeout:Set period after which the screen-saver starts.Additional informationExisting display and ringtone settings could be overwritten.
73Settingsright page (73) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Code protection:The phone code is requested to close the screensaver.Start up anim.Select animation to be shown when the phone is switched on.Shutdn anim.Select animation to be shown when phone is switched off.Welcome textEnter greeting to be displayed in-stead of animation when phone is switched on.Large fontYou can choose between two font sizes for the display.LightingSet display light brighter/darker. The darker the setting the longer the standby time.IPress the navigation key repeatedly at the top/bot-tom to adjust up or down.Silent alert C¢T¢Silent alertTo avoid the disturbance caused by a ringtone, you can activate vibration as an alternative. The vibration can be switched on in addition to the ringtone (in a noisy environment, for example). This function is deactivat-ed when the battery is being charged and accessories are con-nected (except the headset).Silent alertñActivate/deactivate vibration.Play demoThe types of vibration offered are demonstrated.Assigning types of vibrationEach of the following applications can be assigned their own type of vibration:Calls, Messages, Alarm, Chat room NoteThe Digital clock/Animation screen-savers reduce your phone's standby time.
Settings74© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (74) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Connectivityí¢T¢Connectivity¢Select function. EGPRSñActivate/deactivate EGPRS.EGPRS is a method for transmitting data in the mobile network faster than with GPRS. Use EGPRS and if the network has sufficient capacity, you can be connected to the Internet permanently. Only the actual trans-mission time is charged by the net-work operator. Some service provid-ers do not yet support this service. Shown in the display:£Activated and available.¢Registered.¤Temporarily interrupted.EGPRS infoDisplay information on connection status.Bluetooth® (BT)Bluetooth is a short-range radio con-nection by means of which a headset or car kit, for example, can be con-nected without the need for wires. Using the Sendö function in the op-tions menu for the application con-cerned you can also use this route to send data. With SAP (SIM Access Profile) a car phone GSM module can, for exam-ple, use the access data from the SIM card on your phone. There is no need to swap the SIM card. It is possible that SAP might not be supported by your service provider.Each Bluetooth device has its own specific address and can be given a self-explanatory name as an option. Password protection ensures the se-curity of a Bluetooth connection, as does including the BT partner in a list as a "trusted" device.To establish a Bluetooth connection between your phone and other Blue-tooth devices you must activate Bluetooth.ñActivate/deactivate Bluetooth.If Bluetooth is activated, standby time for the phone will be reduced.Shown in the display in standby mode¬Device not visible.©Device visible to others.ªCall accepted on Bluetooth device.
75Settingsright page (75) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Bluetooth sett.ìBluetooth activation.My BT name: You can give the phone a name when you activate Bluetooth for the first time.SearchThe search can be global or just for certain BT devices specified in the options menu.ìOpen selection.Specify which BT devices are to be searched for:All All BT devices.Audio E.g. headset, Car Kit.Phone Other BT phones.PC Personal computer with BT connection.ìStart search.The number and name of the most recently found BT device are displayed. ìThe search is ended and the first 10 devices found are shown in a list.§Repeat§ Start new search.IScroll to the required entry.ìDial the device and start the procedure for accep-tance as a "trusted" device in the list of known devic-es. To do this, enter the password for the other device. If the list is full it is not possible to add anoth-er device.Device list•Known devices To make selection easier, frequent BT partners can be recorded in the known device list. If entries are "trusted", no password query is made. •Last connected List of most recently and/or still con-nected devices. •Reject list Attempts to make connections to devices in this list are rejected.•Last srch result List of the last devices found.List optionsDifferent functions are offered de-pending on the list.
Settings76© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (76) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119§Options§ Open menu.My BT InfoThe phone is given a name (max. 20 characters) – this is the name the partner sees. If no name is given, the phone uses the non-changeable device address.Information about the BT hardware cannot be modified.•Visib.to othersMake settings to specify how your phone should "act" when in contact with other BT devices. This means that if "visible"is set, the device ad-dress or the BT name of your phone is shown to other BT devices if they request this in order to receive or send data.•Not visible Your phone is not "visible" to other BT devices. Known devices such as the Bluetooth Headset / Car Kit con-tinue operating.•Auto mode Your phone is "visible" to other BT devices for five minutes. You will then be asked if "visibility" should continue.•Always visible Your phone is always "visible" to oth-er BT devices. These devices can cre-ate a connection to your phone and be added to the known device list if necessary. BT aud. streamWhen a Bluetooth headset is used, all audio signals are transmitted to this exclusively.Online settingsDefault setting and activation of the connection profiles for data transmission. The phone default setting varies from service provider to service provider:• The settings have already been implemented by the service pro-vider. You can start immediately.• Access profiles have already been created by your service provider. Then select profile and activate.Search/Retry Search for BT devices or repeat search.Use as audio If not possible automati-cally, specify device as an "audio" device.Higher priority Move entry up the list so that, for example, a spe-cific audio device is used first.Lower priority Move entry down the list.to reject list Move entry to the reject list.to known list Move entry to the list of known devices. (For standard functions see page 24)
77Settingsright page (77) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119• The access profiles must be con-figured manually. In this case, you can obtain the necessary data from the service provider or visit: www.BenQ-Siemens.com/mobilesettings Selecting profileFSelect the profile.ìConfirm selection.Fax/dataSend voice/fax bSet this function on the phone before transmission so that you can switch from voice mode to fax mode.Rcve fax/data bYour service provider has given you a number for telephoning and a fax/data number.The call is signalled by a special ring-tone and the type of call (fax or data) is displayed. Now start the commu-nication program in your PC to re-ceive the fax/data.ShortcutsC¢T¢ShortcutsSoftkeysYou can assign one function to the right softkey. EditingISelect key.ñCall up the edit function.IScroll to new assignment in the list.ìConfirm.ApplyThe "Internet" is just used as an ex-ample here.§Internet§ Press and hold; the appli-cation is started.Additional informationThe service provider may have already as-signed functions to all the keys (e.g. access to "SIM services" or direct call-up of the In-ternet portal). It may not be possible to modify this key assignment.
Settings78© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (78) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Navigation keysThe navigation key can be assigned a function for three directions (only ef-fective in standby mode). The down-wards movement is assigned to opening contacts and cannot be modified. ISelect the desired direction.ñCall up the edit function.IChoose application from the list.ìConfirm selection.Number keysNumber keys 2 to 9 can be used as speed dialling numbers for fast ac-cess to functions. Number key 1 is reserved for the mail-box phone number (page 64).Show featuresShow the functions set for the num-ber keys.Assigning numbers or functionsISelect the key.ñCall up the edit function.IChoose application from the list.ìConfirm selection.ApplyStart a stored application (e.g. Internet).In standby mode:3Press briefly.The assignment of the number key 3 is displayed above the right softkey e.g.:§Internet§ Press and hold.Or simply 3Press and hold.
79Settingsright page (79) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Call settingsí¢T¢Call settings¢Select function. Hide ID bWhen you make a call, your phone number can be displayed on the re-cipient's display (depending on the service providers).To suppress this display, you can en-able the "Hide ID" mode for all subse-quent calls or just for the next call. You may need to register separately with your service provider for these functions.Call waiting bIf you are registered for this service, you can check whether it is set and you can activate/deactivate it.ForwardSelect the condition under which calls should be diverted to your mail-box or another phone number. To set diversion:ISelect condition, e.g. Unanswered.ñConfirm change, then select Set.JEnter phone number.§Options§ Open, then select Save.All callsAll calls are diverted.ÇSymbol in top line of dis-play in standby mode.Unanswered bIncludes the conditions Not reachable, No reply, Busy, see below.Not reachableDivert occurs if phone is switched off or is out of range.No replyA call is only diverted after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5-second intervals.BusyDivert occurs if a call is in progress. If Call waiting is activated, you will hear the call waiting tone during a call.Receiving fax bFax calls are diverted to a number with a fax connection.Receiving data bData calls are diverted to a phone number with a PC connection.Status checkYou can check the current divert sta-tus for all conditions. After a short pause, the current situation is trans-mitted by the network and displayed.
Settings80© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (80) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Clear all bAll set diverts are cleared. Call screening bOnly calls from phone numbers that are in Contacts or on the SIM card or assigned to a group are signalled au-dibly. Other calls are only displayed.Any keyIncoming calls can be accepted by pressing any key (except for B).Minute beepDuring the call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient does not hear this beep.Phone settingsí¢T¢Phone settings¢Select function.LanguageSet the language for the display text. When Automatic is set, the language of your service provider is used. If a language that you do not under-stand happens to be set, the phone can be reset to the language of your home service provider with the fol-lowing input (in standby mode):* # 0 0 0 0 # A Input languageSelect the language for text input. Languages supported by T9 are marked with the T9 symbol.User dictionaryT9 importLoad database for T9 support for the current language.T9 exportSave database for T9 support for the current language to My stuff.Key tonesSet the type of acoustic key acknowledgement.Tune, Tone, Silent Additional informationNote that the divert is stored in the network and not in the phone (e.g. when the SIM card is changed).Reactivating divertThe last divert has been stored. Proceed as with "Set divert". The stored phone number is displayed. Confirm number.
81Settingsright page (81) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Info tonesSet service and alarm tones:On/off Activate/deactivate tones.Extended If switched on, a wider range of service tones is available, e.g.: end of menu, network connec-tion interrupted.Auto offThe phone switches off each day at the set time.ActivatingSet Select.JEnter time.§Save§ Save. Switching offSwitch off Select.ìConfirm.File systemFormat(Phone-code protected)The phone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted. Formatting may take longer than 1minute.Format cardFormat the RS MultiMediaCard.Eject cardRemove the RS MultiMediaCard without loss of data while the phone is switched on.License mgr.The licensed data or applications can be displayed and managed (see also DRM, page 21). Phone identityID no.The phone identity number (IMEI) is displayed. This information may be useful for customer service.About phoneProduct name, production date, software version.CC MonitorThe call centre monitor shows information for customer service purposes.Device checkA self-test and individual tests are of-fered. If you select Self test, all indi-vidual tests are carried out.Software versionDisplay the software version for your phone in standby mode:Press * # 0 6 #, then press E.
Settings82© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (82) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Memory assis.The memory assistant will help you if there is insufficient phone memory. If required it can also be started au-tomatically from applications.After their capacities have been checked, all files and folders are dis-played along with their size and may be viewed/opened and, if necessary, deleted.Device manag. The device manager can be used, for example, to transfer configuration data from the service provider via WAP push (page 58). The phone default setting varies from service provider to service provider: • The settings have already been implemented by the service pro-vider. You can start immediately.• The access profiles must be con-figured manually. If necessary, contact your service provider. You will also find the current settings for the service provider on the In-ternet at www.BenQ-Siemens.com/mobilesettings Active account: Software §Start§ Establish a connection to the server. After the data has been transferred:§OK§ Confirm and switch off the phone.Switch on the phone then ...§Yes§ The software will be up-dated. This procedure can take up to 15 minutes. During this time all other applications on your phone will be locked. Emergency calls are also not possible. Afterwards your phone will restart automatically. Now call up the Device manag. again§Start§ A connection to the server will be established. Finally the successful update will be confirmed on the display.
83Settingsright page (83) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Change profile ñShow settings.FSelect the profile Software Update with the naviga-tion key.HCheck the default settings and if necessary enter your service provider’s ac-cess settings.§Options§ Open the options menu.Save Save the profile.Last connectionöThe data for the last con-nection is displayed. Fact. settingsThe phone is reset to the default val-ues (factory setting). This does not affect SIM card and network settings or data saved during Instant Messaging.Alternatively, in standby mode enter:* # 9 9 9 9 # A Clockí¢T¢Clock¢Select function.Time/dateThe clock must be set to the right time once at start-up.ñStart editing.JFirst enter the date (day/month/year), then the time (hours/min-utes/seconds).Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired time zone.City listISelect a city in the selected time zone.Or §Options§ Open menu and select Search city.Additional information÷Display the calendar to select the date.If the battery is removed for longer than 30 seconds, the clock must be reset.
Settings84© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (84) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Time formatSelect 24h or 12h.Date formatSelect the display format for the date.Start of weekSelect the weekday on which the monthly and weekly view on the left starts.Buddhist date bSwitch to the Buddhist year(not on all phone models). Show clockActivate/deactivate time display in standby mode.Auto time bTime and time zone are set automat-ically. The time zone is detected automatically.Securityí¢T¢Security¢Select function.Auto key lockThe keypad is locked automatically if no key has been pressed for a specif-ic (pre-determinable) time. This pre-vents the phone from being used ac-cidentally. However, you can still be called and you can still make an emergency call.HSelect Set.JEnter time in minutes and seconds after which the keypad lock is to be activated.Direct call(Phone-code protected)Only one phone number can be dialled (page 35). Additional informationThe keypad can also be locked and un-locked directly in standby mode.In each case:#Press and hold.
85Settingsright page (85) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Only ¡b(PIN2 or phone-code protected)Dialling options are restricted to SIM-protected phone numbers. If only ar-ea codes are entered, relevant phone numbers can be added to these manually before dialling.If the SIM card does not support PIN2 input, all phone numbers on the SIM card can be protected with the phone code.This SIM only b(PIN2 or phone-code protected)The phone can be connected to a SIM card once the phone code is en-tered. Unless the phone code is known the phone will not operate with a different SIM card.If the phone is to be used with a dif-ferent SIM card, enter the phone code when requested.CertificatesDisplay certificates for secure data connections.PIN codeFor description, see page 25:PIN control, Change PIN, Change PIN2, Chg.phonecode Call blocking bBarring restricts the use of your SIM card (this is not supported by all ser-vice providers). You need a 4-digit network password for network bar-ring which your service provider will give you. You may need to be regis-tered separately for each barring.All outgoingAll outgoing calls except emergency numbers are barred.Outgoing intl.(Outgoing international)Only national calls can be made.Out.int.x home(International outgoing without home country)International calls are not permitted. However you can make calls to your home country when abroad.All incom. callsThe phone is barred for all incoming calls (forwarding all calls to mailbox provides a similar effect).When roamingYou do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.Status checkStatus check for network barrings.Clear allAll barrings are deleted. A password which the service provider will give you is necessary for this function.
Settings86© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (86) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Networkí¢T¢Network¢Select function. Line bThis function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone.Select lineñChange the connection.\Display the current phone number.Protected(Phone-code protected)You may limit usage to one phone number.Network infoThe list of GSM networks currently available is displayed.ÆIndicates forbidden ser-vice providers (depending on SIM card).Choose netwrkNetwork search takes place again if, for example, you leave your home network or want to register on a different network. The search can take place in Manual (see Network info) or Automatic mode (see also Preferred net).Preferred net Enter your preferred service provid-ers here in order of preference for when you leave your home network (e.g. if there are differences in price).The current service provider is displayed.ìShow list of preferred networks.<Empty> Select.ñConfirm change, then se-lect a new service provid-er from the list.Record service provider again (last entry in the list):Furth.network Select, enter the provider data and save it.Additional informationSpecial settings may be made for each phone number (e.g. ringtones, call diver-sion, etc.). To do this, first switch to the re-quired phone number.
87Settingsright page (87) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Band selection bSelect either GSM 900, GSM 1800, or GSM 1900. Make sure that your service provider also supports the selected band.Fast searchWhen this function is active, net-work reconnection is speeded up (standby time is reduced).User group bDepending on your service provider, you can create groups with this ser-vice. These have access, for exam-ple, to internal (company) informa-tion, or special tariffs apply to them. The details can be clarified with your service provider.ActiveActivate/deactivate function. "User group" must be deactivated for nor-mal phone use.Select groupYou can select or add groups other than preferred groups (see below). Code numbers for the groups are ob-tained from your service provider.All outgoingIn addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted.Pref. groupIf activated, calls may only be made within this standard user group (depending on the network configu-ration).Additional informationIf you are outside your home network, your phone automatically dials another GSM network.If the signal strength of the preferred net-work is inadequate when you switch on the phone, the phone may register in a different network. This can change when the tele-phone is next switched on or if another net-work is selected manually.
Settings88© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Settings.fmleft page (88) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Accessoriesí¢T¢Accessories¢Select function.Car KitOnly in combination with an original wired handsfree car kit (see Accessories). The car kit profile is ac-tivated automatically when the phone is connected to the Car Kit.Edit profileSee page 70.Auto answer (Factory default: off)Calls are accepted automatically af-ter a few seconds. Eavesdropping is possible!Auto off(Factory default: 2 hours)The phone is powered by the car's power supply. You can adjust the time between switching off the igni-tion and the time at which the phone switches off automatically.Automatic settings• Permanent illumination: activated.• Auto key lock: deactivated. • Charging the phone battery.• Automatic activation of the Car Kit profile when the phone is con-nected to the car kit.HeadsetOnly in conjunction with an original headset (see Accessories). If an orig-inal headset is used the profile is au-tomatically activated when the headset is plugged in. Edit profileSee page 70.Auto answer (Factory default: off)Calls are accepted automatically af-ter a few seconds a wired headset (except where the ringer is switched off or set to beep). You should there-fore be wearing the headset. Automatic settingAccept call with Call key or Call ac-ceptance key, even when the auto key lock is activated.Upload via USBIf the phone is connected with the data cable to a PC, the battery can al-so be charged in this way (only with original accessories, page 139).Auto answerIf you do not notice that your phone has ac-cepted a call, there is the danger that the caller may eavesdrop.
89Organizerright page (89) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119OrganizerCalendarC¢Q¢CalendarYou can enter appointments in the calendar. Time and date must be set for the calendar to work correctly. The calendar offers you three views:Monthly viewSpecial appointments are highlighted in colour.IPress briefly to go forward/back a week.Press and hold to go forward/back a month.FPress briefly to go forward/back a day.ìOpen daily view.Weekly viewAppointments are shown as a colour bar on the vertical hour divi-sion. Conflicting appointments are highlighted in colour.FPress briefly to go forward/back a day.Press and hold to go forward/back a week.IForward/backward by the hour through the day.ìOpen daily view.Daily viewDescription of appointment. FOne day forward/back.IScroll by the hour or to next/last entry.ìDisplay current entry.Settings§Options§ Open menu, then select Settings.Start of day:Time when the working day begins.Start of week:Weekday on which the monthly and weekly view on the left starts.WeekendSet the days for the weekend.Show birthdays:Yes/No.
Organizer90© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmleft page (90) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119AppointmentsC¢Q¢AppointmentsAppointments are displayed in chro-nological order in a list.Enter new appointment<New entry>Select.Category:cMemo Text input for description.dVoice memo Create a voice memo. Shown with alarm.eCall Enter phone number to be displayed with the alarm.fMeeting Text input for description.gVacation Enter start and end date.hBirthday Enter name and date.Different input/selection fields are displayed depending on the type. The number of fields can be restrict-ed, see Default at the end of the list. Description:Description of nature of appointment.Phone number:Enter a phone number or select one from Contacts.Voice memo:Enter a voice recording, see Dictat.machine, page 93.Location:Location of appointment.Whole day:Day-long appointment: yes/no.Start date:Date when appointment begins.Start time:Time when appointment starts.End date:Date when appointment ends.End time:Time when appointment ends.Additional information÷Insert date from calendar.
91Organizerright page (91) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Alarm:On/off or Silent alert.JEnter the period of time before the appointment and select the time unit:Minutes, Hours, Days Recurrence:Select a timeframe for repeating the appointment:No, Daily, Weekly, Monthly, Yearly Enter a parameter for repeating:Forever, Until, Events (number)If Weekly is selected, certain week-days can be highlighted. All fields/Fewer fieldsIn the list, select those fields which are to be offered for future entries.§Options§ Open menu.Save Save appointment.Information on the alarmWhen the set date and time are reached there is an audio and a visual alarm. Alarm type Birthday: You can send special birthday greet-ings by SMS, MMS, e-mail or a call via §Options§. The alarm sounds one day before the birthday.Use Pause to set the alarm to repeat.Additional informationDisplay above set alarms:¹Alarm clock»AppointmentAn alarm sounds even when the phone is switched off. The phone does not go to standby mode. To deactivate it press any key.
Organizer92© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmleft page (92) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119TasksC¢Q¢TasksA task is displayed like an appoint-ment in the agenda for the selected day. However, unlike an appoint-ment it does not require a time. When no time is entered the task ap-pears at the top of the list every day until it is marked as completed.The entries are made in the same way as Appointments (see "Appoint-ments"). Then:Status:Select Done or Outstanding.Priority:Select 5 levels from Lowest to Highest. Date used:If activated with Yes, the following time input option is offered.Date due:/Due time:Enter the date and time by which the task is to be completed.Alarm: As for Appointments.§Save§ Save task.NotesC¢Q¢NotesWrite and manage brief text notes. Protect confidential information with the phone code (do not save any important data or the PIN for credit cards etc. here).Entering a new note<New entry>Write a normal note.<Confidential>Write a protected note (phone code).JEnter text. The first line is displayed later as a "title" in the notes list. ûSave.
93Organizerright page (93) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Organiser optionsDepending on the application used (Calendar, Appointments, Tasks, Notes) and the current situation, different functions are offered.§Options§ Open menu.Dictat.machineC¢Q¢Dictat.machineUse the dictating machine to record short voice memos. • Use your phone as a dictating machine when on the move.• Record a memo as a reminder or as a note for others.• Add a voice memo to an appointment in the calendar.• Record a call.Delete by Delete all entries prior to a certain date.Delete done Delete all completed tasks.Activate/Deactivate Switch alarm on/off.Done Set task to completed/in progress.(For standard functions see page 24)Warning!The use of this feature may be subject to restrictions under criminal law. Please inform the other party to the conver-sation in advance if you want to record the conversation and please keep such recordings confidential. You may only use this feature if the other party to the conversation agrees.
Organizer94© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmleft page (94) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119New recordingRecord newSelect. The remaining time available, as well as the recording time, are shown in the display.ôA brief beep sounds when the recording starts. Now dictate the text.ó/ôSwitch between pause/record.§Stop§ End recording.Recording is saved with a time stamp. Rename with §Options§.Playback (via Media player)ISelect the desired recording.ò/óSwitch between playback/pause.D/EPress and hold for fast forward and rewind.Dictating machine options§Options§ Open menu.Time zonesC¢Q¢Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired time zone.City listISelect a city in the selected time zone.Or §Options§ Open menu and select Search city.ìSet time zone.Play Play back current recording.Loudspeaker Playback through the built-in loudspeaker.Settings Set recording quality: Low, Medium, High (For standard functions see page 24)
95Organizerright page (95) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Remote synchronisationC¢Q¢Remote sync.You can use this function to synchro-nise the personal data on your phone (contacts, notes, calendar en-tries) with a remote server. The ex-ternal data can, for example, be saved on a company computer. A request to synchronise data can also be received via WAP push (page 58). The user, however, must agree to the start.Settings and functionsISelect the desired function.öDisplay.Active accountTwo profiles can be set for synchronisation. ñDisplay menu for changing.FSelect profile.ñList of profiles is dis-played, select a profile.ìActivate the profile.Set profile:ñDisplay menu for changing.Last sync:Tabview of: Contacts, Appointments, Tasks, Notes Display date, time and sync type of the last synchronisation.Date range bLimit the time for the synchronisa-tion of appointments in days/weeks. Only appointments within the date range will be synchronised.Contacts, Appointments, Tasks, NotesMark application(s) whose data is to be synchronised. You can set the synchronisation mode for each ap-plication separately.Connect. list Select connection/proxy.Address: Enter the URL that points to remote server. Port: Enter port number, e.g. 80.User name: Enter login name.Password: Enter password (shown as a series of asterisks).Server ID: Default ID/Enter server ad-dress (for WAP push mes-sages).
Organizer96© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Organizer.fmleft page (96) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Synchronisation modes You can choose between six modes for each application. The mode will influence the amount of data trans-ferred and the result.Off: The data of this application will not be synchronised.Fast sync.: Only the modifications made after the last sync will be ex-changed between server and mo-bile. Sync all: All data for the selected ap-plication will be transferred from server to mobile and also from mo-bile to server. Server and mobile will contain the same data afterwards. Update server: Data modified on the mobile will be transferred to the server.Update cell: Data modified on the server will be transferred to the mo-bile. Backup: All data from the mobile will be transferred to the server. Warning! All server data will be delet-ed before backup!Restore: All data from the server will be transferred to the mobile. Warning! All mobile data will be delet-ed before restore!SynchronisationBefore synchronisation you must se-lect a profile (Active account) and the sync mode for the database(s). Con-fidential notes are not transferred. §Sync§ Synchronisation with the selected server is started. When synchronisation has been carried out suc-cessfully, the actions that have been performed are displayed on several tabs.
97Extrasright page (97) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119ExtrasSIM services (optional)C¢S¢SIM servicesYour service provider may offer special applications such as mobile banking, share prices, etc. via the SIM card.If you have such a SIM card, the SIM services will appear in the main menu under "Extras" or directly above the softkey (on the left).iSymbol for SIM services.Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone is ready to support fu-ture additions to your service provid-er's user package. For further infor-mation, please contact your service provider.My applicationsTo help you organise the applica-tions you download from the Inter-net you can use the My applications folder in My stuff.For further information, see page 111.CalculatorC¢S¢Calc.The calculator is offered in a basic version and with an advanced range of functions. The input line is in the middle of the display with two calculation lines above it. Beneath it is the matrix with the calculation functions. JEnter digit(s).F/INavigate to functions in the matrix.ìAccept function.JEnter digit(s).ìApply function. The result is calculated and displayed immediately.
Extras98© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmleft page (98) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Calculator options§Options§ Open menu.Unit converterC¢S¢Unit converterYou can convert various measure-ment units in the decimal system into other measurement units.Example for Velocity units: Converting the units/currencyFSelect the sourceunit/currency.HSwitch to the input field.JEnter the quantity to be converted. HSwitch to the selection field.FSelect the target mea-surement unit/currency. The result is displayed.You can use both input fields alternately. Basic functions+, -, *, / Basic calculation types=Result1/x Reversion%Convert to percentage.Decimal point± Sign change "+" / "–"§AC§ New calculationExtended functions: §Options§ Open menu, then select Extended mode.Square rootSquareeExponentMS Save displayed numberMR Call up saved numberM+ Insert number from memoryConvert Call up the current result in the unit converter.Clear all Delete all units.Memory save, Memory recall, Memory clear Save or recall result; delete memory.Extended mode/Basic mode Switch calculator func-tionality.(For standard functions see page 24)xx2Velocity Energy Mass Pressure Time Volume Area Length Power Temperature Currency Type UnitsVelocity Kilometers/h, Meters/sec, Miles/h, Miles/sec, Knots, Mach
99Extrasright page (99) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Special key functions:*Set the decimal point.#Change the preceding sign. CurrencyWhen you call up the function for the first time, you must enter currencies into which the conversions are to be made. JEnter the name of the currency (e.g. Euro).§Options§ Open menu and save the entry with Save.Now enter the names and exchange rates of up to three additional cur-rencies for conversion.§Options§ Open menu.Online status bThe application can be called up from various other applications, such as Chat room or Contacts.In Online status you can set such at-tributes as Availability or Mood. These are visible to people who have sub-scribed to your Online status. You can also edit your status lists for the re-spective service here.Depending on the service provider and available services, five tabs are offered.Online statusFor Instant message: Available, Busy, Not availableIndicate whether you can be reached in the respective service.§Options§ Select Private area. De-pending on the choice be-tween Public, Private or Hide the following at-tributes can be seen by all subscribers, only by mem-bers of the Private list or by no-one.My alias: Enter your personal nickname.My text: Enter your personal infor-mation text (access to saved texts via §Options§).My logo: Select your personal logo (start via §Options§ My stuff or Camera).Sign change Change the preceding sign.Memory save, Memory recall Save or recall result.Edit rate Change the exchange rate for the base currency.Add currency Enter new currency and exchange rate.Set as base Use current currency as base currency.Calculator Start calculator.(For standard functions see page 24)
Extras100© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmleft page (100) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119My mood: Indicate your personal mood.MSG lists b(Instant Messaging lists)Access to the following lists:Pend. requestsDisplay the current requests for your personal attributes.Watcher listDisplay who is watching your attributes.Private listDisplay subscribers who can see all attributes set to Private.IM block listDisplay all subscribers who can see no attributes and are blocked for Chat room.Info messagesList the messages sent by the service provider.SettingsThe dependence of Online status settings on those of the current profile (page 69) can be activated/deactivated. Sound recorderC¢S¢Sound recorderUse the sound recorder to record noises and tones for use as ring-tones. The sound recorder is usually started from other applications/func-tions such as assigning a ringtone.New recordingNew entry Select. The remaining time avail-able, as well as the record-ing time, are shown in the display.ôA brief beep sounds when the recording starts. ó/ôSwitch between pause/record.§Stop§ The recording is ended and saved with a time stamp in My stuff/Sounds. Start the recording from Sound recorder:òPlay back. Rename the recording via §Options§.Start the recording from another application:ìBack to application.
101Extrasright page (101) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Playback (via Media player)ISelect the desired recording.ò/óSwitch between playback/pause.D/EPress and hold for fast forward and rewind.§Options§ Open menu.StopwatchC¢S¢StopwatchThe stopwatch can work with lap times and intermediate times. With Lap timing, each time a time is taken the stopwatch returns to zero.With Split timing, the clock continues to run and the respective intermedi-ate time is stored (max. 99).Display, also in standby mode.ò/õStart, stop or continue, depending on the situation.§Lap§/§Split§ Store the current inter-mediate/lap time.Stopwatch options§Options§ Open menu.Play Play back current recording.Set asöSet the recording as a ringtone.™ contact Assign recorded sounds to a contact.Settings Set recording quality: Low, Medium, High (For standard functions see page 24)Start Start the stopwatch.Next Continue to take an intermediate time.Reset Reset to zero.Stopwatch list Display saved entries.Lap timing/ Split timing Switch mode.(For standard functions see page 24)
Extras102© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmleft page (102) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119CountdownC¢S¢CountdownA set time elapses. The last 4 seconds are indicated by a beep. At the end a special beep sounds. Display, also in standby mode.JEnter period of timeor Iselect standard timing.òStart countdown.Standard timingsIt is possible to call up or set five timings with different countdown times.ISelect standard timing.§Change§ Open input field.JEnter name, then period of time.§Save§ Save entries.Date calculatorCalculate the period between two specified dates.JFrom: enter date, then Until: enter date.§Calc.§ Start calculation.ñEdit output units.FSelect previous/next value.My menuCreate your own menu with frequently used functions, phone numbers or Internet pages. The list of 20 entries is preset. You can, however, change it as you wish.UsingISelect the required entry.ìConfirm.Or AIf the selected entry is a phone number, you can also call it with the Call key.Additional informationFor Stopwatch and Countdown:§Stop§ ends the function prematurely.§Exit§ or Bend only the display, not the function.
103Extrasright page (103) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Extras.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Change menuYou can replace each entry (1–10) with another entry from the selection list.ISelect the required entry.§Change§ The function list is opened for selection.ISelect the new entry from the list.ìConfirm. The entry is saved.If Phonebook is selected, the phone number must also be selected; if Internet is selected, the bookmark must also be selected.Conversa. hist.Read all dialogues from the last session offline (deleted next time you log in).
Alarm clock104© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Alarmclock.fmleft page (104) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Alarm clockC¢U The alarm sounds at the set time even when the ringtones or the phone are switched off. The alarm clock is activated automatically after a change is made. §Off§ Press to end the alarm.ñSet the time for the alarm call (hh:mm).Or ñActivate/deactivate the alarm clock.Setting the days for an alarm§Options§ Open the menu and select Set days.ISwitch between the days of the week.ñMark or unmark the days for an alarm.§Save§ Save the alarm call time.Alarm clock options§Options§ Open menu.¹Alarm clock18:45¹ 07:30Mon Tue Wed Thu FriSat SunOptions ñ Exit Alarm on Activate the alarm clock.Set time Set the alarm call time. Set days Set the days for an alarm.Set Tune Set ringtone.Clock Set time (page 83).Auto snooze If user does not react: snooze only or deactivate alarm.(For standard functions see page 24)Additional information¹Screen display in standby mode: alarm clock activated.Use §Pause§ or press any number key to set the current alarm to repeat.
105Media playerright page (105) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPlayer.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Media playerStarting from an applicationWhen you are viewing a picture/vid-eo or listening to a melody, the appli-cation starts a media playback.Direct number for the media player?Pressor C¢V For fast access, all the media files on your phone are offered on four tabs:Music, Play list, Pictures, Videos FSelect tab.ISelect file.ìStart playback.Media libraryAll music, playlist, video and image files contained on the phone and the RS MultiMediaCard are automatically added to the media library. If you would like a rebuild of the media li-brary, however, press §Options§ ¢Refresh.After the media player starts the following tabs are displayed: MusicAll AAC, AAC+, AAC++ and MP3 files are displayed.All files stored in the phone are auto-matically shown in a list in the Music tab. This list can be arranged accord-ing to the meta data (ID3 tags) by al-bum, artist, genre or title.Play listAll playlists (file format: *.m3u) are displayed.Pictures All supported picture formats are displayed. VideosAll supported video formats are displayed.
Media player106© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPlayer.fmleft page (106) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Music/VideosFunctions for playing back songs or videos. ìPlay or pause, depending on the situation.FFast forward/rewind while key is pressed.ILoad next/previous media file.#Video: Switch to full screen mode and back again.Music: Switch between file list and music animation.[/\Set the volume with the plus/minus sidekeys.*Switch to mute.§Stop§ End playback.For further services, see §Options§ page 107.Play listSeveral pieces of music are compiled in a playlist (*.m3u).§Options§ Open menu, select New and then Play list.Edit playlist options§Options§ Open menu.Playlists in "*.m3u" format created on a PC can be transferred together with the songs into the sounds directory in My stuff using the Mobile Phone Manager (see page 26 and page 112). When the songs are lo-cated in the same directory, the play-list can be played back without any modification.Add track Add a piece of music.Remove track Remove a piece of music.Move track Move piece of music up/down with the navigation key.Centre key functionsòPlay, play back.óPause.õStop.
107Media playerright page (107) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPlayer.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119PicturesZoom functions for a displayed picture. øZoom function if the displayed picture has a higher resolution than the display. The two softkeys (+/–) enlarge/reduce the picture.F/IThe enlarged picture detail is moved using the navigation key.5Centre picture.For further services, see §Options§ page 107.Media player options§Options§ Open menu.Different functions are offered de-pending on the starting situation and the object.Play/Pause Play back the current media file or pause.Open Select the media source such as My stuff, Bookmarks or URL.New Select an application to create a new object or a new playlist for music.Zoom Activate/deactivate zoom mode.Set asöSet picture as Back-ground, Logo, for exam-ple, and sounds, for Incoming call, for exam-ple.™ contact Assign a picture or melody to a contact.Edit playlist Edit a playlist (page 106).Play mode • Individual piece of music• Repeat (piece of music/playlist)• All pieces of music• Introduction; the first 5 seconds of each piece of music is played.Slideshow Automatic run-through in full screen mode. Change individual picture with navigation key.
Media player108© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPlayer.fmleft page (108) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Edit Access to picture editing (application must be loaded).To background Put Media player into the background. Full screen Full screen display of a picture/video.(For standard functions see page 24)Incoming callAn incoming call pauses the playback and puts the media player into the background. After the call has ended the playback continues automatically.Playback in the backgroundYou can put the media player in the back-ground in order to work with other applica-tions. Playback, e.g. of songs, continues.?Press key repeatedly to switch to foreground or background operation.
109My stuffright page (109) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPool.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119My stuffTo organise your files, you can use the file system like a PC file manager. There are separate folders for the various data types in My stuff. C¢N The list of the folders and files is displayed (on two tabs if an RS MultiMediaCard is used). ISelect file or folder.ì/öOpen folder and select file or link.Depending on the selec-tion, the file with the as-sociated application is opened or the download started.Download Melodies, pictures, games and other applications are offered on the Inter-net. Once downloaded, you can ac-cess these via the phone. Most appli-cations include instructions. The appropriate folders contain the download function for downloading new pictures, sounds, etc.Remember that pictures and sounds may be protected (DRM, page 21).Some applications and games are already pre-installed on your phone. Downloading can, if necessary, take place in two stages:Description file onlyÌThe description file is loaded for information purposes only. The appli-cation/game itself must be loaded separately. or complete downloadËThe application/game is completely loaded.
My stuff110© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPool.fmleft page (110) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119My stuff optionsDifferent functions are offered de-pending on the starting situation and the object.§Options§ Open menu.New folder Create a new folder and name it.Attributes Display information on file or folder selected.Move/Copy Select file(s) or folder, then select destination folder and insert with ì.Format card Format RS MultiMedia-Card.Eject card Remove the RS Multi-MediaCard without loss of data.License mgr. Handling of DRM rights.(For standard functions see page 24)Additional informationYou can use the browser to download applica-tions (e.g. ringtones, games, pictures, anima-tions) from the Internet. BenQ Mobile excludes all warranty and liability claims in respect of or in connection with any ap-plications subsequently installed by the customer and any software not included in the original de-livery package. This also applies to functions en-abled subsequently at the customer's instigation. The purchaser bears sole risk for the loss of, damage to, and any defects arising in, this device or the applications and for any direct damage or consequential damage of whatever nature result-ing from the use of this application. For technical reasons, such applications and subsequent en-abling of certain functions are lost in the event of the device being replaced/re-supplied and may be lost if it is repaired. In such cases, the buyer is required to download or enable the application again. Please ensure that your phone has Digital Rights Management (DRM) so that downloaded applications are protected from unauthorised re-production. These applications are then exclu-sively intended for your phone and cannot be transferred from this even to create a backup. BenQ Mobile offers no warranty or guarantee nor does it accept any liability for the customer's abil-ity to download or enable applications again or to do so free of charge. We recommend that you carry out a backup from time to time of the appli-cations on your Windows® PC using the “Mobile Phone Manager”. You will find this on the supplied CD-ROM or you can download the relevant latest version of the MPM from the Internet at: www.BenQ-Siemens.com/c81
111My stuffright page (111) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MediaPool.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Directory structureSeparate folders have already been created for different data types in My stuff. These folders cannot be changed. RS MultiMediaCard™The RS MultiMediaCard extends the memory capacity of your phone by up to a gigabyte. This permits you, for example, to store a large number of pictures, videos or sounds. You can also use the memory card as a removable medium. C¢N EOpen RS MultiMediaCard tab.The list of the folders and files is displayed. The folders and files are treated as in My stuff. If a file is opened whose application is in the phone the file is copied to there.Folder Description FormatSounds Sounds, ringtones mp3aacaac+aac++m3umidamrwavPictures Pictures bmpbmxjpgjpegpnggifVideos Videos 3gpTopics Loaded theme (zipped) sdtTheme configura-tion (unzipped) stcGames Java archive jarDownload info jadApplica-tions Applications, such as Photo Editor or Download Assistant*Other Text modules tmoInternet pages htmlwmlDepending on the service provider, the structure, content and range of functions in My stuff may vary.Additional informationRS MultiMediaCard is a trademark of the MultiMediaCard Association.Changing the RS MultiMediaCard (see page 18)
Mobile Phone Manager112© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_PhoneManager.fmleft page (112) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Mobile Phone ManagerThe MPM (Mobile Phone Manager) enables you to use extended phone functions from your PC. The phone and PC communicate via a data cable (see Accessories, page 139) or Blue-tooth.You can download the latest version of the MPM software from the Internet at:www.BenQ-Siemens.com/c81 OrganiserYou can use the organiser to manage the contacts and appointments you have stored in your phone and syn-chronise them between your phone, Outlook® and other BenQ-Siemens phones. You can use all Call Control functions from the organiser.Call ControlYou can dial straight from the Organ-iser at the click of a mouse. It also makes establishing and managing conference calls extremely easy – the parties to the call are displayed on-screen in a virtual conference room, allowing you to swap effort-lessly between the conference call and a private call and to call and add new subscribers at the click of a mouse.SMS and EMS managementWrite EMS and SMS messages from the convenience of your PC. Use all the options your PC offers you and use your sounds and pictures to cre-ate SMS and EMS messages. You can read, forward, print, delete and archive your messages.
113Mobile Phone Managerright page (113) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_PhoneManager.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Backup and restoreWith the back-up function, you can regularly make a back-up copy of your phone data on the PC. If you ev-er lose the data on your phone, or re-place the phone, you can quickly re-instate all data with the restore func-tion. Please observe any possible re-strictions for DRM-protected data.Bookmark ManagementUse your PC to browse on the Inter-net and define your preferred Inter-net sites. Save the Internet addresses as bookmarks on your phone so that you can quickly call them up at a later time when you are on the move. Phone explorerYou can access the data in your phone quickly and easily with the Phone Explorer. The phone is simply integrated in the data structure of your PC and handled exactly as if it was another folder in your PC.Mobile Modem Assistant The Mobile Modem Assistant quickly and easily establishes an Internet connection via your mobile phone enabling you to use your PC at home or when travelling to surf the Internet.
Mobile Phone Manager114© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_PhoneManager.fmleft page (114) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Picture and photo processingPicture/photo processing offers you the opportunity to conveniently cre-ate, edit and manage pictures and photos. Filters and effects are of-fered to help you create colourful, attractive graphics. The user-friendly interface makes child’s play of trans-ferring pictures/photos from or to the mobile phone, and of changing the graphic settings.My stuffMy stuff offers you a convenient op-tion for managing ringtones, music, playlists and videos. You can sore your music files in your phone auto-matically converting them into a suitable format.Plug & SyncPlug & Sync carries out your routine tasks for you as you wish. With "Music > phone" you can al-ways copy your latest tracks and playlists automatically to your phone. With "Photos > PC" you can transfer your newly taken photos to your PC.SmartSyncWith SmartSync you can always syn-chronise your data with Outlook®, OutlookExpress® or Lotus Notes™ as soon as the phone is connected to a PC. New and changed contacts are synchronised in just the same way as messages and appointments.NotifierIf your phone is connected to a PC you will always be notified on the PC screen, if required, about incoming calls or messages – even when the phone is switched to mute.
115Questions & Answersright page (115) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FAQ.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Questions & AnswersIf you have any questions about using your phone, visit us anytime at www.BenQMobile.com/customercare. For additional help, we have listed below some frequently asked questions and answers.Configuration serviceTo help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet, you can use a configuration service. This service is used to have the necessary settings for your mobile phone sent to you by SMS. We recommend that you contact your network provider who will send you the configuration messages.As an alternative you can also use the "Setting Configurator" at www.BenQMobile.com/customercare. We will then send you the configuration messages. Please follow the instructions contained in those messages.Problem Possible causes Possible solutionPhone cannot be switched on. On/Off key not pressed long enough. Press On/Off key for at least 2 seconds.Flat battery. Charge battery. Check charging indicator in the display.Battery contacts dirty. Clean contacts.See also below under "Charging error".Standby time is too short. Frequent use of organiser and games. Restrict use if applicable.Fast search activated. Deactivate fast search (page 87).Display illumination switched on. Switch off display illumination (page 73).Unintentional keystrokes (illumination!). Switch on Auto key lock (page 84).
Questions & Answers116© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FAQ.fmleft page (116) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Charging error (charge icon not displayed).Battery totally discharged. 1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours.3) Charge battery.Temperature out of range: 5°C to 45°C (41°F to 113°F).Make sure the ambient temperature is right, wait for a while, then recharge.Contact problem Check power supply and connection to the phone. Check battery contacts and telephone connection sock-et, clean them if necessary, then insert battery again.No mains voltage. Use different mains power socket, check mains voltage.Wrong charger. Only use original accessories.Battery faulty. Replace battery.SIM error. SIM card not inserted correctly. Check that the SIM card is inserted correctly (page 17).Dirty SIM card contacts. Clean SIM card with a dry cloth.SIM card with wrong voltage. Use 1.8-V and 3-V SIM cards only.SIM card damaged (e.g. broken). Carry out a visual check. Have service provider change the SIM card.No network connection. Weak signal. Move higher, to a window or an open space.Outside the GSM range. Check service provider’s coverage area.Invalid SIM card. Complain to the service provider.New network not authorised. Try manual selection or select a different network (page 86).Network call barring is set. Check network barrings (page 86).Network overloaded. Try again later.Phone loses network. Signal too weak. Reconnection to another service provider is automatic. Switching phone off and on again can speed this up.Calls not possible. Second line set. Set line 1 ã (page 86).New SIM card inserted. Check for new barrings.Charge limit reached. Reset limit with PIN2 (page 43).Credit used up. Load credit.Some calls not possible. Call restrictions are in place. Barrings can be set by service provider. Check barrings (page 85).Impossible to make entries in contacts. Contacts list is full. Delete entries (see Standard functions, page 24).Voice message not functioning. Call divert to mailbox not set. Set call divert to mailbox (page 64).Problem Possible causes Possible solution
117Questions & Answersright page (117) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FAQ.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119å flashes. SMS memory is full. Delete SMS messages (see Standard functions, page 24) or archive them (page 50).æ flashes. MMS memory is full. Delete MMS messages (see standard functions, page 24).ç flashes. Phone memory full. Delete messages, pictures, videos, games or applications.Function cannot be set. Not supported by service provider or registration required.Contact your service provider.Capacity problems with, for example, Games & More, ringtones, pictures, videos, SMS archive.Phone memory full. Delete files in the relevant areas. You can use the memory assistant to delete specific files (page 82).No Internet access, downloading not possible.Profile not activated, profile settings wrong/incomplete. Activate or set browser profile. If necessary consult your service provider.Message cannot be sent. Service provider does not support this service. Check with your service provider.Phone number for service centre not set or incorrectly set.Set service centre (page 52).SIM card contract does not support this service. Contact your service provider.Service centre too busy. Repeat message.Recipient does not have a compatible phone. Check.EMS pictures are not displayed on the destination phone.Destination phone does not support the EMS standard.No Internet access possible. Incorrect browser profile set, or wrong or incomplete settings.Check browser settings; contact your service provider if necessary.PIN error/PIN2 error Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, contact your service provider.Phone code error. Three wrong entries. Contact Service Centre (page 119).Problem Possible causes Possible solution
Questions & Answers118© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FAQ.fmleft page (118) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Service provider code error. No authorisation for this ser-vice. Contact your service provider.Too few/too many menu entries. Functions may have been added or deleted by the ser-vice provider via the SIM card.Check with your service provider.No fax possible. Wrong settings in the PC. Check settings.No authorisation for this ser-vice. Contact your service provider.Charge meter does not work. Charge pulse is not being transmitted. Contact your service provider.DamageSevere shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry con-nector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the phone!Problem Possible causes Possible solutionReset settings to the factory default, page 83: * # 9 9 9 9 # A
119Customer Careright page (119) of C81 PHILLIPPE FCC FUG en, (03.05.2006, 11:23)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_Hotline.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Customer CareQualified employees are waiting to offer you expert information about our products and installation.In some countries repair and replace servic-es are impossible where the products are not sold through our authorised dealers.If repair work is necessary, please contact one of our service centres:Abu Dhabi.........................................0 26 42 38 00Argentina .....................................0 81 02 22 66 24Australia..........................................13 00 66 53 66Austria..................................................05 17 05 17Bahrain .................................................... 40 42 34Bangladesh.......................................0 17 52 74 47Belgium.............................................0 78 15 22 21Bolivia...............................................0 21 21 41 14Bosnia Herzegovina..........................0 33 27 66 49Brunei ................................................. 02 43 08 01Bulgaria............................................... 02 73 94 88Cambodia ........................................... 12 80 05 00Canada........................................1 88 87 77 02 11Chile..................................................8 00 53 06 62China ..............................................40 08 88 56 56Colombia....................................01 80 07 00 66 24Croatia..............................................0 16 10 53 81Czech Republic.................................2 33 03 27 27Denmark............................................. 35 25 65 29Dubai ................................................0 43 96 64 33Ecuador ..........................................18 00 10 10 00Egypt.................................................0 23 33 41 11Estonia................................................ 56 64 54 00Finland............................................09 22 94 37 00France.............................................01 56 38 42 00Germany......................................0 18 05 33 32 26Greece............................................80 11 11 11 16Hong Kong.......................................... 28 61 11 18Hungary..........................................06 14 71 24 44Iceland.................................................. 5 20 30 00India.............................22 24 98 70 00 Extn: 70 40Indonesia.....................................0 21 46 82 60 81Ireland.............................................18 50 77 72 77Italy.................................................02 45 27 90 36Ivory Coast.......................................... 05 02 02 59Jordan...............................................0 64 39 86 42Kenya.................................................... 2 72 37 17Kuwait................................................... 2 45 41 78Latvia.................................................... 7 50 11 18Lebanon.............................................. 01 44 30 43Libya ...............................................02 13 50 28 82Lithuania...........................................8 70 07 07 00Luxembourg....................................40 66 61 56 40Macedonia........................................0 23 13 18 48Malaysia....................................+ 6 03 77 12 43 04Malta.......................................+ 35 32 14 94 06 32Mauritius ............................................... 2 11 62 13Mexico .......................................01 80 07 11 00 03Morocco.............................................. 22 66 92 09Netherlands .................................0 90 03 33 31 00New Zealand...................................08 00 27 43 63Nigeria ..............................................0 14 50 05 00Norway................................................ 22 57 77 46Oman....................................................... 79 10 12We offer fast, individual advice! You have several options:Our online support on the Internet:www.BenQMobile.com/customercare We can be reached any time, any place. You are given 24 hour support on all as-pects of our products. Here you will find an interactive fault-finding system, a compila-tion of the most frequently asked ques-tions and answers, plus user guides and current software updates to download.When calling customer service, please have ready your receipt and the phone identity number (IMEI, to display press *#06#), the software version (to display, press *#06#, then E) and if available, your Service customer number.You will also find the most frequently asked questions and answers in the sec-tion entitled "Questions & Answers" in this user guide on page 115.
Customer Care120© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_Hotline.fmleft page (120) of C81 PHILLIPPE FCC FUG en, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Pakistan..........................................02 15 66 22 00Paraguay ..........................................8 00 10 20 04Peru..................................................0 80 05 24 00Philippines ........................................0 27 57 11 18Poland.............................................08 01 30 00 30Portugal ............................................8 08 20 15 21Qatar....................................................04 32 20 10Romania .........................................02 12 09 99 66Russia..........................................8 80 02 00 10 10Saudi Arabia .....................................0 22 26 00 43Serbia .............................................01 13 07 00 80Singapore ............................................62 27 11 18Slovak Republic..............................02 59 68 22 66Slovenia............................................0 14 74 63 36South Africa....................................08 60 10 11 57Spain.................................................9 02 11 50 61Sweden...........................................08 57 92 90 49Switzerland.....................................08 48 84 08 45Taiwan............................................02 23 96 10 06Thailand............................................0 27 22 11 18Tunisia.................................................71 86 19 02Turkey..........................................0 21 64 59 98 98Ukraine ........................................8 80 05 01 00 00United Arab Emirates........................0 43 66 03 86United Kingdom...........................0 87 05 33 44 11Uruguay..........................................00 04 05 46 62USA .............................................1 88 87 77 02 11Venezuela....................................0 80 01 00 56 66Vietnam...........................................84 89 20 24 64Zimbabwe............................................04 36 94 24
121Care and maintenanceright page (121) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_Maintenance.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Care and maintenanceYour phone has been designed and manu-factured to the highest of standards and should be treated with great care. The sug-gestions below will help you to enjoy your phone for many years.• Protect your phone from moisture and hu-midity. Precipitation, humidity and liquids contain minerals that will corrode electron-ic circuits. Nevertheless, should your phone become wet, disconnect it immedi-ately from the power supply to avoid elec-tric shock. Do not place your phone (even to dry it) on/in a source of heat such as a microwave oven, oven or radiator. The phone may become overheated and possibly explode.• Do not use or store the phone in dusty, dirty areas. Its moving parts may be damaged and the casing may become deformed and discoloured.• Do not store your phone in hot environ-ments (e.g. vehicle instrument panel in the summer). High temperatures can shorten the life of electronic devices, damage bat-teries and warp or melt certain plastics. • Do not store your phone in cold environ-ments. When the phone warms up again (to its normal ambient temperature), mois-ture can form inside the phone, which may damage electronic circuit boards. • Do not drop, knock or shake your phone. Rough handling can damage internal cir-cuit boards!• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone!The suggestions given above apply equally to your phone, battery, charger and all ac-cessories. If any of these parts is not working properly, obtain fast and reliable help at our service centres.Battery quality statementThe capacity of your mobile phone battery will reduce each time it is charged/emptied. Storage at too high or low temperatures will also result in a gradual capacity loss. As a result the operating time of your mobile phone may be considerably reduced, even after a full recharge of the battery.Regardless of this, the battery has been de-signed and manufactured so that it can be recharged and used for six months after the purchase of you mobile phone. After six months, if the battery is clearly suffering from loss of performance, we recommend that you replace it. Please buy only original batteries.Display quality declarationFor technological reasons, a few small dots with different colours may appear in the dis-play in exceptional cases.Just remember that the appearance of brighter or darker dots generally does not mean that a fault has occurred.
Product data122© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Data.fmleft page (122) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Product dataDeclaration of conformityBenQ Mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The relevant declara-tion of conformity (DoC) has been signed. Please call the company hotline if you re-quire a copy of the original:www.BenQMobile.com/conformity Technical dataOperating timeTalktime: up to 300 minutesStandby time: up to 300 hours The operating time depends upon the re-spective network conditions and conditions of use. Extreme temperatures considerably reduce the standby time. You should there-fore avoid the leaving the phone in the sun or on a radiator.The following applications reduce the stand-by time and can be deactivated if required:• CB services (page 64)• Screensaver (page 72)• Lighting (page 73)• Bluetooth (page 74)• Fast search (page 86)• EGPRS (page 74)GSM class: 4 (2 watt)Frequency range: 880–960 MHzGSM class: 1 (1 watt)Frequency range: 1,710–1,880 MHzGSM class: 1 (1 watt)Frequency range: 1,850–1,990 MHzWeight: 90 g (3.2 oz)Size: 103 × 47 × 18.5 mm(4x1.8x0.7 inches)(84 ccm)Li-Ion battery: 820 mAhOperating temperature: –10 °C to 55 °C(14°F to 131°F)SIM card: 1.8 V and 3.0 VRS MultiMediaCard: max. 1 GBPhone IDYou will need the following information if you lose your phone or SIM card: the number of the SIM card (on the card):..............................................................15-digit serial number of the phone (under the battery):..............................................................the customer service number of the service provider:..............................................................Lost phoneIf you lose your phone or SIM card, contact your service provider immediately to pre-vent misuse.
123SAR right page (123) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_SAR.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119SAR INFORMATION ON RF EXPOSURE / SPECIFIC ABSORPTION RATE (SAR)THIS MODEL MEETS THE GOVERN-MENT’S REQUIREMENTS FOR EXPO-SURE TO RADIO WAVESYour cellular phone is a radio trans-mitter and receiver. It is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commis-sion (FCC, USA) and by Health Cana-da. These requirements include safe-ty margins designed to assure the protection of all persons, regardless of age and health. They use a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit is 1.6 W/kg averaged over one gram of tissue. The highest SAR value for this device when tested at the ear was 0.44 W/kg. In positions other than the head, such as on the body, a separation distance of 2.0 cm is required. The highest SAR value in this case was 0.34 W/kg.Information about this device model can be found at http://www.fcc.gov/oet/fccid by searching the equipment authori-zation system using FCC ID: PWX-C81.As SAR is measured utilizing the de-vice’s highest transmitting power, the actual SAR of this device while operating is typically below that indi-cated above. This is due to automatic changes to the power level of the de-vice to ensure it only uses the mini-mum level required to reach the net-work. Additional Information can be found on the websites of the World Health Organization (http://www.who.int/emf), the Cellular Telecommunications In-dustry Association (CTIA) web-site at www.phonefacts.net, the Canadian Wireless Telecommuni-cations Association (CWTA) website www.cwta.ca or BenQ Mobile (www.BenQMobile.com).
U.S. FDA124© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmleft page (124) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119U.S. FDAThe U.S. Food and Drug Administration's (FDA) Center for Devices and Radiological Health Consumer Update on Mobile PhonesFDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is know – and what remains unknown – about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This in-formation may be used to respond to questions.Why the concern?Mobile phones emit low levels of ra-dio frequency energy (i.e., radio fre-quency radiation) in the microwave range while being used. They also emit very low levels of radio frequen-cy energy (RF), considered non-sig-nificant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these ques-tions, no clear picture of the biologi-cal effects of this type of radiation has emerged to date. Thus, the avail-able science does not allow us to conclude that mobile phones are ab-solutely safe, or that they are unsafe. However, the available scientific evi-dence does not demonstrate ad-verse health effects associated with the use of mobile phones.What kinds of phones are in question?Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversa-tion. These types of mobile phones are of concern because of the short distance between the phone's an-tenna – the primary source of the RF – and the person's head. The expo-sure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a per-son's RF exposure decreases rapidly with distance from the source. The safety of so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned.
125U.S. FDAright page (125) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119How much evidence is there that hand-held mobile phones might be harmful?Briefly, there is not enough evidence to know for sure, either way; howev-er, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments inves-tigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results. A few ani-mal studies, however, have suggest-ed that low levels of RF could accel-erate the development of cancer in laboratory animals. In one study, mice genetically altered to be predis-posed to developing one type of can-cer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether re-sults obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the stud-ies showed increased tumor devel-opment used animals that had al-ready been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtu-ally continuously – up to 22 hours per day.For the past five years in the United States, the mobile phone industry has supported research into the safe-ty of mobile phones. This research has resulted in two findings in partic-ular that merit additional study:1. In a hospital-based, case-control study, researchers looked for an asso-ciation between mobile phone use and either glioma (a type of brain can-cer) or acoustic neuroma (a benign tumor of the nerve sheath). No statis-tically significant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of gliomas were considered together. It should be noted that the average length of mobile phone exposure in this study was less than three years.When 20 types of glioma were con-sidered separately, however, an as-sociation was found between mobile phone use and one rare type of glio-ma, neuroepithelliomatous tumors. It is possible with multiple compari-sons of the same sample that this as-sociation occurred by chance. More-over, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents in-crease risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is ex-
U.S. FDA126© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmleft page (126) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119pected to bear on the accuracy and repeatability of these results.12. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of ab-normalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural chang-es in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after expo-sure to simulated cell phone radia-tion, but only after 24 hours of expo-sure. It is possible that exposing the test cells to radiation for this long re-sulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the ab-normalities to occur. The data al-ready in the literature on the re-sponse of the micronucleus assay to RF are conflicting. Thus follow-up re-search is necessary.2FDA is currently working with gov-ernment, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cel-lular Telecommunications Industry Association (CTIA) in particular is ex-pected to lead to FDA providing re-search recommendations and scien-tific oversight of new CTIA-funded research based on such recommen-dations.Two other studies of interest have been reported recently in the literature:• Two groups of 18 people were ex-posed to simulated mobile phone signals under laboratory condi-tions while they performed cogni-tive function tests. There were no changes in the subjects' ability to recall words, numbers, or pic-tures, or in their spatial memory, but they were able to make choic-es more quickly in one visual test when they were exposed to simu-lated mobile phone signals. This was the only change noted among more than 20 variables com-pared.3• In a study of 209 brain tumor cas-es and 425 matched controls, there was no increased risk of brain tumors associated with mo-bile phone use. When tumors did exist in certain locations, howev-er, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small num-ber of cases, the increased likeli-hood was too small to be statistically significant.4In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems as-sociated with use of mobile phones.
127U.S. FDAright page (127) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119FDA continues to work with all par-ties, including other federal agencies and industry, to assure that research is undertaken to provide the neces-sary answers to the outstanding questions about the safety of mobile phones.What is known about cases of human cancer that have been reported in users of hand-held mobile phones?Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. popu-lation at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increas-ing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to com-pare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched peo-ple without brain cancer. This is called a case-control study. The cur-rent case-control study of brain can-cers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information.What is FDA's role concerning the safety of mobile phones?Under the law, FDA does not review the safety of radiation emitting con-sumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manu-facturers of mobile phones to notify users of the health hazard and to re-pair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mo-bile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:• Support needed research into pos-sible biological effects of RF of the type emitted by mobile phones;• Design mobile phones in a way that minimizes any RF exposure
U.S. FDA128© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmleft page (128) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119to the user that is not necessary for device function; and• Cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health.• At the same time, FDA belongs to an interagency working group of the federal agencies that have re-sponsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level. These agencies are:• National Institute for Occupation-al Safety and Health• Environmental Protection Agency• Federal Communications Com-mission• Occupational Health and Safety Administration• National Telecommunications and Information AdministrationThe National Institutes of Health also participates in this group.In the absence of conclusive information about any possible risk, what can con-cerned individuals do?If there is a risk from these products – and at this point we do not know that there is – it is probably very small. But if people are concerned about avoid-ing even potential risks, there are sim-ple steps they can take to do so. For example, time is a key factor in how much exposure a person receives. Those persons who spend long peri-ods of time on their hand-held mobile phones could consider holding lengthy conversations on convention-al phones and reserving the hand-held models for shorter conversations or for situations when other types of phones are not available.People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance be-tween their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For ex-ample, they could switch to:• a mobile phone in which the an-tenna is located outside the vehi-cle,• a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or• a headset with a remote antenna to a mobile phone carried at the waist.
129U.S. FDAright page (129) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Where can I find additional information?For additional information, see the following websites:• Federal Communications Com-mission (FCC) RF Safety Program (select “Information on Human Ex-posure to RF Fields from Cellular and PCS Radio Transmitters”): www.fcc.gov/oet/rfsafety• World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): www.who.int/emf• United Kingdom, National Radio-logical Protection Board: www.nrpb.org.uk• Cellular Telecommunications In-dustry Association (CTIA): www.wow-com.com• U.S. Food and Drug Administra-tion (FDA) Center for devices and Radiological Health: www.fda.gov/cdhr/consumer/1 Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Sympo-sium; 1999 June 20; Long Beach, California.2 Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environ-mental Mutagen Society; March 29, 1999, Washington, DC; and personal communica-tion, unpublished results.3 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915- MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.4 Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular telephones and the risk for brain tumors; a case-control study. Int. J. Oncol, 15: 113-116, 1999.
FCC/Industry Canada Notice130© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_FDA.fmleft page (130) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119FCC/Industry Canada NoticeYour phone may cause TV or radio in-terference (for example, when using a telephone in close proximity to re-ceiving equipment). The FCC or In-dustry Canada can require you to stop using your telephone if such in-terference cannot be eliminated. If you require assistance, please con-tact your local service facility.Statement required by 15.19 and RSS210This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
131Intellectual propertyright page (131) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_Intellectual_property.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Intellectual propertyIntellectual Property RestrictionsAll Intellectual Property, as defined be-low, which is owned by or otherwise the property of BenQ Mobile GmbH & Co. OHG ("BenQ Mobile"), its affiliates, partners or suppliers, relating to the Phone, including but not limited to ac-cessories, parts or software relating thereto (the “Phone System”), is pro-prietary under federal laws, state laws and International treaty provisions. In-tellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer pro-grams, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) disassemble, decompile, reverse engi-neer, prepare derivative works from, modify or make any other effort to cre-ate source code from the software. No title to ownership in the Intellectual Property is transferred to you through purchase or possession of the Phone or its components. All applicable rights of the Intellectual Property shall re-main with BenQ Mobile, its affiliates, partners or suppliers.BenQ Mobile will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with soft-ware, apparatus or devices not fur-nished by BenQ Mobile, nor will BenQ Mobile have any liability for the use of ancillary equipment or software not furnished by BenQ Mo-bile which is attached to or used in connection with the Product, The foregoing states the entire liability of BenQ Mobile with respect to in-fringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for BenQ Mobile certain exclusive rights for copyright-ed BenQ Mobile software, such as the exclusive rights to reproduce and distribute copies of such BenQ Mo-bile software. BenQ Mobile software may be used only in the Product in which the software was originally embodied when purchased, and such software in such Product may not be replaced, copied, distributed. modified in any way, or used to pro-duce any derivative thereof. No other use including, without limitation, al-teration, modification, reproduction, distribution. or reverse engineering of such BenQ Mobile software or ex-ercise of rights in such BenQ Mobile software is permitted. No license is granted by implication, estoppel or otherwise under BenQ Mobile patent rights or copyrights.
Ten Driving Safety Tips132© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_Driving_Tips.fmleft page (132) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Ten Driving Safety TipsYour BenQ wireless phone gives you the power to communicate by voice – almost anywhere, anytime. But an important responsibility accompa-nies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:Get to know your phone and its features such as speed dial and redial.Carefully read your instruction man-ual and learn to take advantage of valuable features most phones offer including, automatic redial and memory dial – most phones can store up to 99 numbers in memory dial. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.When available, use a hands-free device.A number of hands-free wireless phone accessories are readily avail-able today. Whether you choose an installed mounted device for your phone or a speaker phone accessory, take advantage of these devices if they are available to you.Position your phone within easy reach.Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voicemail answer it for you.Suspend conversations during hazard-ous driving conditions or situations.Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazard-ous, but so is heavy traffic. As a driv-er, your first responsibility is to pay attention to the road.Do not take notes or look up phone numbers while driving.If you are reading an address book or business card while driving a car, or writing a “to do” list, then you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying at-tention to the road or nearby vehicles.Dial sensibly and assess the traffic.If possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before
133Ten Driving Safety Tipsright page (133) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_Driving_Tips.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119you begin your trip, or attempt to co-incide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this sim-ple tip – dial only a few numbers, check the road and your mirrors, then continue.Do not engage in stressful or emotional conversations that may be distracting.Stressful or emotional conversations and driving do not mix – they are dis-tracting and even dangerous when you are behind the wheel. Make peo-ple you are talking with aware you are driving and if necessary, suspend phone conversations that have the potential to divert your attention from the road.Use your phone to call for help.Your wireless phone is one of the greatest tools you can own to pro-tect yourself and your family in dan-gerous situations – with your phone at your side, help is only three num-bers away. Dial 9-1-1 in the case of fire, traffic accident, road hazard, or medical emergency. Remember, it is a free call on your wireless phone.Use your phone to help others in emergencies.Your wireless phone provides you a perfect opportunity to be a “good Sa-maritan” in your community. If you see an auto accident, crime in progress or other serious emergen-cies where lives are in danger, call 9-1-1, as you would want others to do for you.Call roadside assistance or a special wireless non-emergency assistance number when necessary.Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call to 9-1-1. But you can still use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless numbers.Provided by the Cellular Telecommunica-tions Industry Association (CTIA)“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1 (888) 901-SAFE, or visit our Web site at: www.wow-com.com
End user license agreement134© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_EndUserLic.fmleft page (134) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119End user license agreementThis Software License Agreement ("Agreement") is between You and BenQ Mobile GmbH & Co. OHG and/or one of its affiliates ("Licensor"). The Agreement authorizes You to use the Software specified in Clause 1 below, which may be included on Your phone, stored on a CD-ROM, sent to You by electronic mail, downloaded from Licensor's Web pages or servers or from other sources under the terms and conditions set forth below. This is an agreement on end user rights and not an agreement for sale. Licensor continues to own the copy of the Soft-ware and any other copy that You are authorized to make pursuant to this Agreement. Read this Agreement carefully before installing, download-ing or using the Software. Further, by installing, downloading and/or using the Software, You agree to the terms and conditions of this Agreement.1. Software.As used in this Agreement, the term "Software" means, collectively: (i) all the software in Your phone, all of the contents of the disk(s), CD-ROM(s), electronic mail and its file attachments, or other media with which this Agreement is provided;(ii) related Licensor or third party software;(iii) digital images, stock photo-graphs, clip art or other artistic works ("Stock Files"); (iv) related explanatory written ma-terials ("Documentation"); (v) fonts; (vi) upgrades, modified versions, up-dates, additions and copies of the Software, if any, licensed to You by Licensor (collectively "Updates") and(vii) any other possible documenta-tion related thereto.2. End user rights and use.Licensor grants to You a non-exclu-sive, non-transferable end user right to install the Software or use the Software installed on the phone. The Software is licensed with the phone as a single integrated product and may be used with the phone only as set forth in these licensing terms.
135End user license agreementright page (135) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_EndUserLic.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 0601193. Limitations on end user rights.(a) You may not copy, distribute, or make derivative works of the Software.(b) You may not use, modify, trans-late, reproduce or transfer the right to use the Software or copy the Soft-ware except as expressly provided in this Agreement.(c) You may not resell, sublicense, rent, lease or lend the Software; ex-cept You may permanently transfer all of Your rights as set forth in the Agreement only as part of a perma-nent sale or transfer of the phone, provided the recipient agrees to the terms of this Agreement.(d) You may not reverse engineer, re-verse compile, disassemble or other-wise attempt to discover the source code of the Software (except to the extent that this restriction is expressly prohibited by law) or create derivative works based on the Software.(e) You shall not display, modify, reproduce or distribute any of the Stock Files included with the Software.(f) You shall not display, modify, re-produce or distribute any of the pre-loaded content included with the software unless permitted as stated in the User Guide or in the prompts in the Software. In the event that You are allowed to display, modify, repro-duce or distribute certain parts of the pre-loaded content, You shall review the "Readme" files associated with the pre-loaded content (contained on the CD) to ascertain what rights You have with respect to such mate-rials. Pre-loaded content may not be used in the production of libelous, defamatory, fraudulent, infringing, lewd, obscene or pornographic ma-terial or in any otherwise illegal man-ner. You agree that You shall only use the pre-loaded content in a man-ner that complies with all applicable laws, including, but not limited to, applicable restrictions concerning copyright and other intellectual property rights. You may not register or claim any rights in the pre-loaded content or derivative works there of.(g) You agree that You shall only use the Software in a manner that com-plies with all applicable laws in the jurisdiction in which You use the Software, including, but not limited to, applicable restrictions concern-ing copyright and other intellectual property rights.
End user license agreement136© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_EndUserLic.fmleft page (136) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 0601194. Copyright.Licensor and/or its software suppliers and their respective affiliates own the Software and all rights, including without limitation including propri-etary rights therein, are protected by international treaty provisions and other applicable national laws of the country in which it is being used. The structure, organization and code of the Software are the valuable trade secrets and confidential information.5. Multiple copies/updates.If the Software supports multiple platforms or languages, if You re-ceive the Software on multiple me-dia, of if You otherwise receive mul-tiple copies of the Software, the number of phones on which all ver-sions of the Software are installed shall be one phone. If the Software is an Update to a previous version of the Software, You must possess a valid end user right to such previous version in order to use the Update and You may use the previous ver-sion for ninety (90) days after You receive the Update in order to assist You in the transition to the Update. After such time You no longer have a right to use the previous version, ex-cept for the sole purpose of enabling You to install the Update.6. Commencement & termination.This Agreement is effective from the first date You use or install the Soft-ware. Your end user rights automati-cally and immediately terminate without notice from Licensor if You fail to comply with any provision of this Agreement. In such event, You must immediately delete, destroy or return at Your own cost and ex-pense, and without entitlement to any refund of the purchase price, the phone and the Software, and all re-lated material to Licensor.7. Except as expressly provided in the limited warranty for the phone, you acknowledge the Soft-ware is provided "as is" without war-ranty of any kind express or implied. To the maximum extent permitted by applicable law neither Licensor, Licensor's Software suppliers or their respective affiliates, nor the copy-right holders make any representa-tions or warranties, express or im-plied, including but not limited to the warranties of merchantability or fitness for a particular purpose or that the Software will not infringe any third party patents, copyrights, trademarks or other rights. There is no warranty by Licensor or by any other party that the functions con-tained in the Software will meet your requirements or that the operation of the Software will be uninterrupt-ed or error free.
137End user license agreementright page (137) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_EndUserLic.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 0601198. Not fault tolerant. The Software may contain technoloy that is not fault tolerant and is not designed, manufactured, or intend-ed for use in environments or appli-cations in which the failure of the li-censed Software could lead direclty to death, personal injury, or severe physical or environmental damage or financial loss.9. Limitation of liability.To the maximum extent permitted by applicable law, in no event shall Licensor or Licensor's Software sup-pliers or their respecitve affiliates and employees be liable for any lost profits, revenue, sales, data or costs of procurement of substitute goods or services, property damage, per-sonal injury, interruption of busi-ness, loss of business information or for any special, direct, indirect, inci-dental, economic, cover, punitive, special or consequential damages, however caused and whether arising under contract, tort, negligence, or other theory of liability arising out of the use of or inability to use the Soft-ware, even if Licensor or its Software suppliers are advised of the possibili-ty of such damages. Because some countries/states/jurisdictions do not allow the exclusion or limitation of li-ability, but may allow liability to be limited, in such cases, the liability of Licensor, its Software suppliers and their respective affiliates and em-ployees shall be limited to, at Licen-sor's option, either (a) return of the price paid less a reasonable amount for usage, or (b) repair or replacment of the Software that does not meet the limited warranty provided with the phone and which is returned in accordance with the requirements of the limited warranty.Nothing contained in this Agree-ment shall prejudice the statutory rights of any party dealing as a con-sumer. Nothing contained in this Agreement limits Licensor's liability to You in the event of death or per-sonal injury resulting from Licensor's negligence if law prohibits such a limitation. Licensor is acting on be-half of its software suppliers and their respective employees and affili-ates for the purpose of disclaiming, excluding and/or restricting obliga-tions, warranties and liability as pro-vided in this clause 9, but in no other respects and for no other purpose.
End user license agreement138© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\STD_FCC_EndUserLic.fmleft page (138) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 06011910. Technical support.Licensor has no obligation to furnish You with technical support except as agreed in writing between You and Licensor in the Limited Warranty pro-vided with the phone.11. Export control.The Software may be subject to ex-port regulations of the United States and other countries. You agree that You shall comply with all applicable export laws, restrictions and regula-tions of the United States or foreign agencies or authorities, and shall not export, or transfer for the purpose of re-export, any Software, product or technical data received under this Agreement or any Software or prod-uct produced by use of such techni-cal data, including processes and services, in violation of any applica-ble restrictions, laws or regulations, or without all necessary approvals.12. Applicable law & general provisions.This Agreement shall be governed by and construed in accordance with the laws of the State of California without regard to its conflicts of laws rules. This is the entire agreement between Licensor and You relating to the Software and it supersedes any prior representations, discus-sions, undertakings, end user agree-ments, communications or advertis-ing relating to the Software.
139Accessoriesright page (139) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Accessory.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119AccessoriesProducts can be obtained in specialist shops or you can visit the Mobile Store online: www.BenQMobile.com/shop Fashion & CarryCarrying CasesBelt Case FCL-600Tour Case FCT-650EnergyLi-Ion Battery EBA-760 (820 mAh)Spare battery.Travel ChargerTravel Charger EU ETC-100Travel Charger UK ETC-110 Travel charger with an extended input voltage range of 100–240 V.Car Charger Plus ECC-100Charger for the cigarette lighter socket in the car. It is possible to make phone calls during charging.Desk Top Stand EDS-100Desk top stand charger for the phone.Handsfree PortableHeadset Basic HHS-100Headset HHS-110Headset with PTT key (push to talk) to ac-cept and end calls.Headset Purestyle HHS-120High quality headset with detachable earphones and key to make/end phone calls.Headset Stereo HHS-150Stereo headset with key for enjoying music and making phone calls.Headset Bluetooth®HHB-700 with EU mains adapterHHB-710 with UK mains adapter Elegant, small Bluetooth® headset that is very comfortable to wear.HHB-100 Easy to wear Bluetooth headset.Headset Bluetooth® ClipHHB-130 with EU power supply unitHHB-131 with UK power supply unitStylish Bluetooth headset to clip at your clothing.Headset Bluetooth® ComfortHHB-160 with EU power supply unitHHB-161 with UK power supply unitElegant Bluetooth headset to wear behind the ear.Headset Bluetooth® Stereo HHB180/181HHB-180 with EU power supply unitHHB-181 with UK power supply unitStereo Bluetooth® headset for high quality and convenient handsfree talking and listen-ing to music.Headset Bluetooth® Stereo HHB-750Stereo Bluetooth® headset with integrated display for high quality and convenient handsfree talking and listening to music.
Accessories140© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_Accessory.fmleft page (140) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119OfficeData Cable DCA-100For connecting the phone to the serial RS232 port of the PC.Data Cable USB DCA-140For connecting the phone to the USB port of the PC. With charging function.SyncStation DSC-100Table support for the phone to facilitate simultaneous data exchange and telephone charging. Includes a desktop stand and a USB data cable.MultitainmentMobile Music Set Bluetooth® IMS-100The portable Mobile Music Set Bluetooth al-lows you to listen to music on your mobile phone via the active loudspeaker anywhere you go and with excellent sound quality in a wireless way.Car SolutionsMobile Holder HMH-100Holds the mobile phone securely in the vehi-cle. Ideal for use with headset or Car Kit Por-table (universal input).Car Kit Portable HKP-100The portable handsfree car kit can easily be moved from one car to another. Simply plug into the cigarette lighter socket, connect and talk.Car Kit Bluetooth® Easy HKW-100High-tech Bluetooth handsfree car kit with no cable connection to the mobile phone. In-stallation is easy – simply plug into the ciga-rette lighter socket.Car Kit Bluetooth® Portable HKW-700High-tech Bluetooth handsfree car kit with an external display and with no cable con-nection to the mobile phone. Installation is easy – simply plug into the cigarette lighter socket.Car Kit Bluetooth® HKW-710Innovative Bluetooth® handsfree kit with an external display for making in-car calls safely and conveniently.Car Kit Bluetooth® SIM HKW-720Innovative Bluetooth® handsfree kit with an external display for making in-car calls safely, conveniently, and with low power consumption.
141Menu treeright page (141) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MenuTree.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Menu treeContacts >All contactsGroupsOnline statusSIMFilterCall records >Missed callsCalls receivedCalls dialedDelete recordsTime/charges >Last callAll incomingAll outgoingRemain. unitsCharge settingsInternet >URL/service providerDownload wiz.Enter URLBookmarksInternetHistorySaved websitesCamera >Take a photoRecord videoMessages >Create new >SMSMMSE-mail
Menu tree142© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MenuTree.fmleft page (142) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Messages >Inbox >SMS, MMSE-mailWAP pushDraft >SMS, MMSE-mailSent >SMS, MMSE-mailOutbox >SMS, MMSChat room E-mailVoice mailboxWAP pushCB services >Receive CBRead new CBTopic listAuto displayUse Topic indexCB languagesMsg. archive >SMS, MMSE-mailTemplates >Text templatesMMS templatesSettings >Zoom inEmoticonsSave aft. sendSMSMMSE-mailWAP push set.
143Menu treeright page (143) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MenuTree.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Organizer >CalendarAppointmentsTasksNotesDictat.machineTime zonesGames Remote sync.Media playerAlarm clockExtras >SIM servicesMy applicationsCalc.Unit converterOnline statusSound recorderStopwatchCountdownDate calculatorMy stuff My menuSettings >ProfilesRingtones >VolumeCallsMessagesOrganizerAlarm clockChat roomGamesStartup tuneShutdown tuneSound recorder
Menu tree144© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MenuTree.fmleft page (144) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Settings >TopicsDisplay >BackgroundLogoScreensaverStart up anim.Shutdn anim.GreetingLarge fontLightingSilent alertConnectivity >BluetoothEGPRSEGPRS infoB-tooth setupOnline settingsFax/dataShortcuts >SoftkeysNavigation keysNumber keysCall settings >Hide IDCall waitingForwardCall screeningAny keyMinute beep
145Menu treeright page (145) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MenuTree.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Settings >Phone settings >LanguageKey tonesInfo tonesAuto offMemory assis.File systemLicense mgr.Phone identityDevice manag.Fact. settingsClock >Time/dateTime zonesTime formatDate formatStart of weekBuddhist dateShow clockAuto timeSecurity >Auto key lockDirect callOnly ¡PIN codeThis SIM onlyCertificatesCall blocking
Menu tree146© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_MenuTree.fmleft page (146) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Settings >Network >LineNetwork infoChoose netwrkAuto networkPreferred netBand selectionFast searchUser groupAccessories >Car KitHeadsetUpload via USB
147Indexright page (147) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FUGSIX.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119IndexAAccept list........................................... 58Accessories....................................... 139Alarm ................................................. 91Alarm clock....................................... 104All calls (diversion)..............................79All incoming (network barrings) .......... 85Any key to answer .............................. 80Appointments..................................... 90Auto displayClock..............................................84Time/charges.................................. 43Auto key lock......................................84Auto last number redial.......................32BBand selection .................................... 87BatteryCharging ........................................ 19Inserting......................................... 17Operating times.............................. 19quality declaration........................121Big letters ........................................... 73Bluetooth ........................................... 74Bookmarks (WAP) .........................66, 67Browser .............................................. 67Buddhist year......................................84CCalculator ........................................... 97Calendar............................................. 89CallAccepting/ending ........................... 32Blocked .......................................... 85Charges.......................................... 43Conference..................................... 34Diverting ........................................ 79Ending............................................31Menu .............................................35Putting on hold...............................33Rejecting ........................................ 32Toggling (swapping).......................33Call back.............................................32Call divert ...........................................79Call screening .....................................80Call transfer........................................ 35Call waiting...................................33, 79Calling................................................ 31Calls received (call record) .................. 42Camera .............................................. 44Car KitSetting........................................... 88Care of phone .................................. 121CB services ......................................... 65Certificates......................................... 85Charges.............................................. 43Charges/units ..................................... 43Charging the battery .......................... 19Charging via USB ................................ 88Codes................................................. 25Conference ........................................ 34Connection profiles ...................... 68, 76Contacts............................................. 37Converter........................................... 98Countdown ...................................... 102Credit limit ......................................... 43Currency converter............................. 99DDate format........................................ 84Device manager ................................. 82Dialling code ...................................... 31Dialling with number keys .................. 31Dictating machine .............................. 93Digital Rights Management................. 21DisplayIllumination ................................... 73Language....................................... 80Symbols......................................... 15Wallpaper....................................... 72Divert................................................. 79Driving safety................................... 132DTMF tones (tone sequences)............. 36Duration/charges................................ 43EEarpiece volume................................. 31EGPRS ................................................ 74E-mailSettings ......................................... 56Writing........................................... 54Emergency number ............................ 20End user license agreement .............. 134Extras................................................. 97
Index148© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FUGSIX.fmleft page (148) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)Template: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119FFactory settings ..................................83Fast access.......................................... 77Fast network search............................ 87Formatting (phone memory)...............81Forwarding (call) ................................ 35Frequency range.................................87HHandsfree talking................................ 33HeadsetAccessories...................................139Setting ........................................... 88Hide ID ...............................................79Home network.................................... 86Hotline ............................................. 119IIdentity number (IMEI)........................81IMEI number.......................................81Inbox............................................49, 58Info tones........................................... 81Information services (CB) ....................65Inst. Message...................................... 59International dialling code ..................31Internet ..............................................67KKey tones............................................80LLast number redial .............................. 31Legal notices......................................... 3Licence Manager.................................81Limit (duration/charges)...................... 43Logo................................................... 72Loss of phone, SIM card ....................122MMailbox ..............................................64Maintenance of phone...................... 121Media player.....................................105Memory assistant................................ 82Menu tree.........................................141MessageCB ..................................................65E-mail............................................. 54MMS ..............................................46SMS................................................46Message type...................................... 51Microphone on/off.............................. 35Minute beep....................................... 80Missed calls (call record)..................... 42Mobile Phone Manager..................... 112MultiMediaCard................................ 111Muting (microphone) ......................... 35My menu.......................................... 102My stuff ........................................... 109NNetworkBarring........................................... 85Connection .................................... 86Settings ......................................... 86Notes ................................................. 92Number busy...................................... 32Numbers dialled (call record) .............. 42OOne number only ............................... 35Only ¡............................................. 85Operating times (battery) ................... 19Organiser ........................................... 89PPC connection .................................... 26Personal greeting ............................... 73Phone code ........................................ 25Phone data....................................... 122Phone ID (IMEI) .................................. 81Phone number memo......................... 31Phone number transmission on/off ..... 79Phone setup ....................................... 80Photo ................................................. 44PINChanging ....................................... 25Control .......................................... 25Entering......................................... 20Error ............................................ 117Use ................................................ 25PIN Codes........................................... 25PIN2................................................... 25POP3 (e-mail) ..................................... 57Preferred network .............................. 86Preventing accidental activation ......... 26Product data..................................... 122ProfilesPhone ............................................ 69WAP............................................... 68Progress ............................................. 68Prompt............................................... 32
149Indexright page (149) of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:24)© BenQ Mobile 2006, Z:\C81_PHILIPPE_1\output\FUG\PHILIPPE_FCC_am_060503_te_vz\PHILIPPE_FUGSIX.fmTemplate: X75, 143x105 mm, Version 2.2;VAR Language: am; VAR issue date: 060119Provider logo ...................................... 72PUK, PUK2 ..........................................25Putting a call on hold ....................33, 35QQuestions & Answers ........................115RReceiving signal..................................21Records .............................................. 42Reject list............................................58Reminder............................................ 32Remote synchronisation......................95Ringtone setting .................................71Ringtones ........................................... 71SSafety precautions ................................6Screensaver ........................................ 72Second phone number........................86Security .............................................. 25Service centre (SMS) ...........................51Service tones ...................................... 81Setting time/date ................................83Settings .............................................. 69Short message (SMS)..........................46Shown in the display........................... 15Shut down animation ......................... 73SIM cardClearing barrings ............................26Inserting......................................... 21Problems ...................................... 116SIM services (optional)........................97SMSLists................................................ 50T9 input .........................................28SMTP (e-mail) .....................................57Software version.................................81SOS ..............................................11, 20Sound recorder.........................100, 101Sound recording ...............................100Special characters ...............................27Standard functions.............................. 24Standby mode ....................................21Standby time ..............................19, 122Start up animation..............................73Stopwatch ........................................ 101Stor.Internet p. ................................... 68Switching microphone on/off..............45Switching off the phoneAutomatic...................................... 81Manual .......................................... 20Switching on (phone)......................... 20Symbols ............................................. 15Synchronisation ................................. 95TT9 text input ...................................... 28Tasks.................................................. 92Technical data.................................. 122Text inputWith T9.......................................... 28Without T9..................................... 27Text module....................................... 30Themes .............................................. 72This SIM only...................................... 85Time zones............................. 20, 83, 94Toggling............................................. 33Tone sequence (DTMF)....................... 36UUpper and lowercase letters (T9) ........ 27User group ......................................... 87VVideo playback ................................. 106Voice mailbox..................................... 64VolumeEarpiece volume............................. 31Profiles........................................... 69Ringtone ........................................ 71WWallpaper (display)............................. 72WAP ................................................... 66WAP push........................................... 58

Navigation menu