BenQ Mobile and OHG CX70 GSM 900/1800/1900 Mobile Phone User Manual ULYR

BenQ Mobile GmbH & Co. OHG GSM 900/1800/1900 Mobile Phone ULYR

User Manual

© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_IVZ.fmTable of Contents 1VAR Language: am; VAR issue date: 040819See also Index at the end of this User Guideleft page (1) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:44)Legal notices .............................. 4Safety precautions ..................... 6Antenna care ........................... 8Phone operation ...................... 8Electronic devices .................... 9Telephone list (schematic) ....... 13Display symbols ....................... 15Getting started ......................... 17Inserting the SIM card/battery 17Charging the battery .............. 18Changing CLIPIt™ covers ........ 19Switching phone on and off/enter-ing PIN ...................................... 20Enter PIN ............................... 20Emergency number (SOS) ...... 20General instructions ................ 21Standby mode ....................... 21Signal strength ...................... 21Digital Rights Mgmt. (DRM) .... 21Main menu ............................ 21Standard functions .................. 23Highlighting mode ................. 24Menu speed dialling ............... 24Security .................................... 25Codes .................................... 25Preventing accidental activation .............. 26Text entry ................................. 27Calling ...................................... 31My phone ................................. 37Default book ............................ 38Address book ............................39New entry ..............................39Change entry ......................... 41Dialling an entry .....................41Groups ...................................42Phonebook ...............................43New entry ..............................43Call (search for an entry) ........44Change entry ......................... 44<Special books> ..................... 45Call records ............................... 46Dur./charges ............................. 47Camera ..................................... 48Photo mode ........................... 48Video mode ............................ 49Inbox ........................................ 50SMS ........................................... 51Write/send ..............................51Read ....................................... 53Setting ...................................55MMS .........................................57Create ................................... 57Templates ..............................59Sending an MMS .................... 60Receiving an MMS .................. 61Reading an MMS ....................62Setting ...................................63E-mail ........................................ 65Write ...................................... 65Receive/read ........................... 66Setting ...................................67Table of Con-tentsSee also In-dex at the end of this User Guide
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_IVZ.fm2 Table of ContentsVAR Language: am; VAR issue date: 040819See also Index at the end of this User Guideleft page (2) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:44)Chat room ................................ 69Start menu ............................. 69Login ..................................... 70Contact lists ........................... 70Start chat ............................... 73Msg. history ........................... 74Setting ................................... 74Voice message/mailbox ........... 76CB services ............................... 77Surf & fun ................................. 78Internet ................................ 78Bookmarks ............................. 80Emoty .................................... 80Games and Applications ......... 81Download wiz. ....................... 81Setup ........................................ 83Profiles .................................. 83Topics .................................... 85Dynamic light ........................ 86Display ................................... 87Ring tones ............................. 89Phone Pilot ............................ 91Call setup ............................... 92Phone setup ........................... 94Clock ..................................... 96Connectivity .......................... 97Security ............................... 101Network .............................. 103Accessories .......................... 105My menu ................................ 106Fast access key ....................... 107Organizer ................................ 109Calendar .............................. 109Appointments ......................110Tasks ....................................111Notes ................................... 112Missed appts. .......................112Dictation mac .......................113Time zones ...........................114Extras ...................................... 115Walky Talky ..........................115SIM services (optional) ......... 120Alarm clock ..........................120Sound recorder .....................121Calculator ............................. 122Unit converter ......................123Stopwatch ............................124Countdown .......................... 124Remote synchronisation .......125Device manag. ..................... 126Media player ...........................128My stuff .................................. 129Mobile Phone Manager .......... 131Questions & Answers ............. 133Care and maintenance ........... 136U.S. FDA ..................................137FCC/Industry Canada Notice ...143Ten driving safety tips ............ 144Intellectual property .............. 146Product data ...........................147SAR (CX70) ............................. 148
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_IVZ.fmTable of Contents 3VAR Language: am; VAR issue date: 040819See also Index at the end of this User Guideleft page (3) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:44)Battery quality statement ...... 150Accessories ............................ 151End user license agreement .. 153Menu tree .............................. 158Index ...................................... 164
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\LegalNotices.fmLegal notices4VAR Language: am; VAR issue date: 040819left page (4) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Legal noticesThe mobile phone described in this guide is approved for use on the GSM and GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries.© 2004 Siemens Information and Communication Mobile, LLC.All rights reserved.Siemens and the CX70 model phone are trademarks or registered trade-marks of Siemens AG and/or its affili-ates in the United States and/or other countries.T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trade-marks and logos are trademarks or registered trademarks of Sun Micro-systems, Inc. in the U.S and other countries. The names of actual com-panies and products mentioned herein may be the trademarks of their respective owners. DisclaimerTHE INFORMATION CONTAINED IN THE USER GUIDE IS WRITTEN FOR THE CX70 PHONE. SIEMENS RESERVES THE RIGHT TO MAKE CHANGES AND IMPROVEMENTS TO THE PRODUCTS AND ANY OF THE FEATURES OF THE PRODUCTS DESCRIBED IN THIS DOCUMENT WITHOUT PRIOR NOTICE. THE CON-TENTS OF THE USER GUIDE ARE PRO-VIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRAN-TIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRAN-TIES OF MERCHANTABILITY AND FIT-NESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CON-TENTS OF THIS DOCUMENT. SIEMENS RESERVES THE RIGHT TO REVISE THE USER GUIDE OR WITH-DRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. UNDER NO CIRCUM-STANCES SHALL SIEMENS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.Export InformationThe mobile phone may be subject to export regulation of the United States and other countries. Diversion contrary to law is prohibited. You must comply with all applicable export laws, restrictions and regula-
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\LegalNotices.fm5Legal noticesVAR Language: am; VAR issue date: 040819left page (5) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)tions of the United States foreign agencies or authorities, and may not export, or transfer for the purpose of re-export, the mobile phone or any part of the phone in violation of any applicable restrictions, laws or regu-lations, or without all necessary approvals.Network ServicesA number of features included in this guide are called Network Services. They are special services provided by wireless service providers. In order to use any of these Network Ser-vices, you must subscribe to these service(s) from your service provider and obtain instructions for their use. Some of these Network Services may not be available when roaming on a network other than your home net-work.Standby andTalk Time InformationThe mobile phone incorporates fea-tures that are new to the mobile phone world. These may include color displays and lighting, graphic games, music reproduction and browsing the Internet. The way you use the display and the features will affect the performance of the bat-tery and how long it lasts between charge cycles. The quoted standby times and talk times show the mini-mum and maximum performance that can be expected from the bat-tery under normal network condi-tions and with the default settings as set by the factory. However, playing games (particularly with the back-light continuously switched on) and listening to music will shorten the time available for standby and to make and receive telephone calls. Operation times also vary depending on network conditions, SIM settings, charging and battery condition, how you use your phone and other fac-tors. MemoryThe mobile phone contains an inter-nal memory device that stores the software required to operate the mobile phone, communicate with the GSM/GPRS network and provide the user interface. Some features in the internal memory run additional devices and some additional games and utilities. The amount of memory available in the mobile phone is finite and may be insufficient to store large numbers of applications and files. Warning!Remember to back up your data and to do so frequently. Always back up all data and programs before sending the mobile phone in for repair.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fmSafety precautions6VAR Language: en; VAR issue date: 040413left page (6) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)Safety precautionsPlease read the operating instructions and safety precautions carefully before use. Information for parentsExplain the content and the hazards associated with using the phone to your children.Remember to comply with legal requirements and local restrictions when using the phone. For example, in air-planes, gas stations, hospitals or while driving.Cellular phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Keep at least 8 inches (21 cm) between phone and pacemaker. When using the cell phone hold it to the ear which is farthest from the pacemaker. For more information consult your doctor.The SIM card may be removed. Caution! Small parts like this could be swallowed by young children.The mains voltage specified on the power supply unit (V) must not be exceeded. Otherwise the charging device may be destroyed.Do not use a handheld while driving.The ringtone (p. 89), info tones (p. 94) and speakerphone talk-ing are reproduced through the loudspeaker. Do not hold the phone to your ear when it rings or when you have switched on the speakerphone function. Oth-erwise you risk serious, permanent damage to your hearing.Use only original Siemens bat-teries (100% mercury-free) and charging devices. Otherwise you risk serious damage to health and property: The battery may explode, for instance.Do not open the phone. Only the battery (100% mercury-free) or SIM card may be replaced. You must not open the battery under any circumstances. Any other changes to this device are strictly prohibited, as they will invalidate the type approval required for operation of the unit.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fm7Safety precautionsVAR Language: en; VAR issue date: 040413left page (7) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)Important Please dispose of unwanted batteries and phones as speci-fied by the laws in your country.The phone may cause interfer-ence close to TVs, radios and PCs.Use only Siemens original accessories. This will avoid potential risks to health or prop-erty and ensure compliance with all relevant regulations.Improper use will invalidate the warranty! These safety instructions also apply to Siemens original accessories.Product attributes are subject to changes in technology, design and availability. Siemens reserves the right to modify prod-ucts without prior notice.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fmSafety precautions8VAR Language: en; VAR issue date: 040413left page (8) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)Antenna careUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attach-ments could damage the phone and may violate FCC regulations.Phone operationNormal positionHold the phone as you would any other telephone with the antenna pointed up and over your shoulder.Tips on efficient operationFor your phone to operate most efficiently:•Extend your antenna fully (if applicable).• Do not touch the antenna unnec-essarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.PoC OperationDepending on the service options offered by your service provider, you may be able to use the CX70 phone as a two-way radio (push-and-talk over cellular "PoC" mode). In order to maintain compliance with FCC RF exposure guidelines while using the CX70 phone in PoC mode, the phone must be held in a vertical position at least one inch (2.5 cm) from the lips.DrivingLaws pertaining to the use of mobile phones while driving vary signifi-cantly from state to state and some-times even from locality to locality within states. For example, some areas may allow persons to use their mobile phones only if they employ a hands-free device, and some areas may prohibit the use of cell phones entirely. Accordingly, Siemens rec-ommends that persons check the laws for the areas in which they drive or will be driving. For areas where the use of mobile phones while driv-ing is permitted, Siemens encour-ages persons to use their phones responsibly and to employ hands-free devices. Also, if using your phone while driving, please:• Give full attention to driving – driving safely is your first responsibility;• Use hands-free operation;ImportantRead this information before using your wireless handheld phone.As this mobile phone is equipped with a fixed (non-retractable) antenna, some paragraphs in the text below may not be applicable.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fm9Safety precautionsVAR Language: en; VAR issue date: 040413left page (9) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)• Pull off the road and park before making or answering a call, if driving conditions so require.For vehicles equipped with air bagsAn air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equip-ment is improperly installed and the air bag inflates, serious injury could result.Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.PacemakersThe Health Industry Manufacturers' Association recommends that a min-imum separation of 6 inches (21 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommenda-tions are consistent with the inde-pendent research by and recommen-dations of Wireless Technology Research.Persons with pacemakers• should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;• should not carry the phone in a breast pocket;• should use the ear opposite the pacemaker to minimize the poten-tial for interference;• should turn the phone OFF imme-diately if there is any reason to suspect that interference is taking place.Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider or your hearing aid manu-facturer to discuss alternatives.Other medical devicesIf you use any other personal medi-cal devices, consult the manufactur-ers of your devices to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtain-ing this information.Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facili-
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fmSafety precautions10VAR Language: en; VAR issue date: 040413left page (10) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)ties may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehi-cle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted facilitiesTurn your phone OFF in any facility where posted notices so require.AirplanesFCC and Airline Regulations prohibit using your phone while in the air. Turn your phone OFF when requested by the airline.Check and comply with the policy of your airline regarding the use of your phone while the airplane is on the ground.Blasting areasTo avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Potentially explosive atmospheresTurn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include: fueling areas such as gasoline stations; below deck on boats; fuel or chemi-cal transfer or storage facilities; vehi-cles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fm11Safety precautionsVAR Language: en; VAR issue date: 040413left page (11) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)Emergency calls (SOS)Your wireless phone can be used to make emergency calls. You can make an emergency call from the main display screen. Enter the local emergency number such as 911 and then press the Akey.This phone, like any wireless phone, operates using radio signals, wire-less and landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential commu-nications (for example, medical emergencies). Remember - to make or receive any calls, the phone must be switched on and be used in a ser-vice area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network services or phone features are in use. Check with local service providers regarding their network features. Always make certain that your phone is properly charged before attempting any emergency calls. If you allow your battery to discharge, you will be unable to receive or make calls, including emergency calls. You must then wait a few minutes after the charging begins to place any emergency calls.When making an emergency call, remember to give all of the neces-sary information as accurately as possible. Remember that your wire-less phone might be the only means of communication at the scene of an accident, therefore you should not terminate the call until given permis-sion to do so.Batteries and ChargersOnly use original Siemens batteries (100% mercury-free) and charging devices. Use of non-Siemens batter-ies and/or charging devices may cause explosion resulting in serious injury and/or property damage. Use original Siemens accessories in order to avoid possible injury and property damage and to ensure compliance with applicable laws and regula-tions. Improper use invalidates the warranty.Battery safety precautionsTo reduce the risk of fire, injury or electric shock, and to properly dis-pose of batteries, please read and understand the following instruc-tions. CONTAINS LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DIS-POSED OF PROPERLY. DO NOT DIS-POSE IN MUNICIPAL WASTE.1. Only use the batteries specified for use with this mobile phone.2. Do not use batteries of different sizes or from different manufac-turers in this mobile phone.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\am_Security.fmSafety precautions12VAR Language: en; VAR issue date: 040413left page (12) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (25.08.2004, 16:27)3. Do not dispose of the battery in a fire; it may explode. Dispose of used batteries and phones in accordance with applicable laws and safety regulations. Do not expose battery to water. Check with local codes for special dis-posal instructions. 4. Do not open or mutilate the bat-tery. Doing so may cause damage to the eyes or skin.5. Exercise care in handling the bat-tery in order not to short the bat-tery with conducting materials such as rings, bracelets, and keys. The battery or conducting mate-rial may overheat and cause burns or fire.6. Charge the battery provided with, or identified for use with, this product only in accordance with the instructions and limitations specified in the User's Guide. Do not attempt to charge the battery by any means other than those specified in the User's Guide.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Overview.fm13Telephone list (schematic)VAR Language: am; VAR issue date: 040819left page (13) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Telephone list (schematic)1 A Call keyDial phone number/name displayed/highlighted, take calls. Show last phone numbers dialled in standby mode. 2 B On/Off/End key• Switched off: Press and hold to switch on.• During a conversation or in an appli-cation: press briefly to finish. • In menus: Press briefly to go back a level. Press and hold to go back to standby mode.• In standby mode: Press and hold to switch off phone.3JoystickC Press the joystick down verti-cally to start an application or function (p. 22).In standby mode:C Open main menu.G Open user profiles.H Open Phonebook/Address book.E Main Inbox openD Start the camera.In lists, messages and menus:I Scroll up and down.D Back one level.During a call:I Set volume.E Call options. 4 Soft keysThe current functions of this key are shown in the bottom line of the display as §Text§/symbol (e.g. p).5 Additional key for WAP access (if required, and no other default setting is made).Z £ X Service provider01.10.2004 10:10NewMMS í Ï
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Overview.fmTelephone list (schematic)14VAR Language: am; VAR issue date: 040819left page (14) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)1 Integrated antennaDo not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality.2 LED for Dynamic Light (p. 86)3 Loudspeaker4 Display5 Infrared interface (IrDA)6 Input keys7 *Ringtone•Press and hold in standby mode: Switch all audible signals on/off (except alarm). •Press and hold on incoming call: Switch off ringtone for this call only.8 #Key lockPress and hold in standby mode: Switch key lock on/off.9 Connection socketFor charger, headset, flash, etc.: Connection for external antenna* Camera lens" Mirror (depending on telephone model)Z £ X Service provider01.10.2004 10:10NewMMS í Ï
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Displaysymbols.fm15Display symbolsVAR Language: am; VAR issue date: 040819left page (15) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Display symbolsDisplay symbols (selection)Z Signal strengthW ChargingW Battery charge level, e.g. 50 %L PhonebookP RecordsO Surf & funService supplier portalQ OrganiserM MessagesR CameraS ExtrasN File managementT SettingsÇ All calls are diverted¿ Ringing tone off¾ Short ring (beep) only¼ Ringer only if the caller is stored in the Phonebook.¹ Alarm setÄ Keypad lockedÅ Auto answer feature onT9Abc Text input with T9£ Activated and available¢ Registered¤ Temporarily interrupted± Browser Offline² Browser online³ Browser via GPRS online´ Browser no network ¯ IrDA activated® IrDA transmissionEvents (selection)ã SIM memory fullä SIM memory fullå Phone memory fullÆ No network access Missed callÊ Memory assistant
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Displaysymbols.fmDisplay symbols16VAR Language: am; VAR issue date: 040819left page (16) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Message symbols (selection)p Unreadq Readr Drafts Sentt MMS not sentw MMS received x MMS read y MMS with DRM contents (p. 21)z E-mail forwarded{ E-mail with attachmentÀ Voice mail receivedCamera symbolsÑ/ÒSwitches between photo and videoÙ BrightnessÚ Zoom factorÛ White balance× Flash connected
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fm17Getting startedVAR Language: am; VAR issue date: 040819left page (17) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Getting startedInserting the SIM card/batteryThe service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.Press the grooved area 1, then push cover towards the front in the direc-tion indicated by the arrow 2.• Place the SIM card in front of the slot with the contact surface fac-ing downwards. Then press the SIM card slightly to push it in 3 (ensure that the chamfered corner is in the correct position).• Insert the battery sideways into the phone 4, then press it down-wards 5 until it engages. • To remove, press the retaining tab on the side of the battery, then lift the battery out.• Place the battery cover, then push it towards the front 6, until it clicks into place. Additional informationPlease switch off your phone before removing the battery!Only 3 V SIM cards are supported. Please contact your service provider if you have an older card.123456
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fmGetting started18VAR Language: am; VAR issue date: 040819left page (18) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Charging the batteryCharging the batteryThe battery is not fully charged when delivered. Plug charger cable into the bottom of the phone, plug power supply unit into a mains power socket and charge for at least two hours. As an alternative, the battery can be charged via the USB port (see Accessories, p. 151). YDisplay during charging.Charging timeAn empty battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 °C to 45 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded. Operating timeThe operating time depends upon the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time. Avoid placing the phone in the sun or on a heater.Call time: 100 to 330 minutesStand-by time: 60 to 300 hours.Charge icon not visibleIf the battery has been discharged fully, the charge icon is not immedi-ately visible when the power supply is plugged in. It will appear after up to two hours. In this case the battery is fully charged after 3 to 4 hours.Only use the plug-in power supply included in delivery!Display while in serviceCharge level display during opera-tion (empty–full):V W X A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly after an uninterrupted charging/dis-charging cycle. You should therefore not remove the battery unnecessarily and where possible not finish the charging process prematurely. Additional informationThe power supply unit heats up when used for long periods. This is normal and not dangerous.If the battery is removed for longer than 30 seconds, the clock must be reset.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fm19Getting startedVAR Language: am; VAR issue date: 040819left page (19) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Changing CLIPIt™ coversYou can use CLIPIt™ covers (accesso-ries) to adjust the appearance of your phone according to your per-sonal taste.Please switch the phone off before changing the keypad mat or face-plate.Dismantling the phone Remove battery cover (see p. 17). To remove the faceplate, insert the key into the opening, apply slight pressure 1 and turn it at the same time 2 to open the lock.Assembling the phoneRemove the old keypad mat and insert the new keypad mat 3 into the faceplate. Take care that it is cor-rectly positioned. Insert the phone into the bottom of the faceplate 4 and then push it in carefully until it clicks into position 5.12CLIPit™ CoversThe new keypad has an additional key beneath the joystick to permit direct access to the Internet information from the service provider.345
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fmSwitching phone on and off/entering PIN20VAR Language: am; VAR issue date: 040819left page (20) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Switching phone on and off/entering PINSwitching phone on and off BPress and hold the On/Off/End key.Enter PINThe SIM card can be protected with a 4 to 8-digit PIN.JEnter the PIN using the number keys. The charac-ters **** appear to ensure nobody can read your PIN on the display. Correction with ]. CConfirm by pressing the joystick. Logging on to the network will take a few seconds.Emergency number (SOS)Only to be used in real emergencies!By pressing the soft key §SOS§ you can make an emergency call on any net-work without a SIM card and without entering a PIN (not available in all countries).Switching on your phone for the first timeTime/dateDuring commissioning, set the clock so that it displays the correct time. You will not have to make this set-ting again.CPress this key, then select §Change§.JFirst enter the date (day/month/year), then the time (24 hours, including seconds).CPress this key. The time and date are updated.Time zonesFSet the time zone you are in.ISelect a city in the desired time zone .§Options§ Use Set time zone to save.Copying SIM addressesThe first time the SIM card is inserted, the entries on it can be cop-ied to the Addressbook. Please do not interrupt this procedure. During this time, do not accept incoming calls. Fol-low the instructions in the display.You can also copy data from the SIM card at a later time (p. 44).Additional informationChange PIN.......................................p. 25Clear SIM card barring ......................p. 26
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fm21General instructionsVAR Language: am; VAR issue date: 040819left page (21) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)General instructionsStandby modeThe phone is in standby mode and is ready for use when the name of the service provider appears on the dis-play.BPress and hold the On/Off/End key to return to standby mode from any situation.Signal strengthZStrong signal strength.[A weak signal reduces the call quality and may lead to loss of the connection. Change your location.Digital Rights Mgmt. (DRM)Remember that your telephone has digital rights management. The use of downloaded pictures, sounds or applications can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, number of times it can be used etc. (see also p. 82).Main menuThe main menu is displayed graphi-cally with symbols:CCall up from standby mode.F ISelect the application symbols.CStart an application.Main menu options§Options§ Open menu.Different functions are available depending on the context:Large letters Selection between two font sizes.Illumination Set display light brighter/darker.Help Display of a help text.Search List output of the menu. Entering letters will access a function directly.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fmGeneral instructions22VAR Language: am; VAR issue date: 040819left page (22) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)User guideMenu controlsThe steps needed to reach a function are shown in a condensed form in the user guide, e. g. to display call list for missed calls in condensed form:C¢P¢Missed callsThis comprises the following steps:COpen the main menu.GSelect P, then function Missed calls.CConfirm.SymbolsThe following symbols are used to explain operation:CPress joystick The symbol in the centre of the lower line of the display shows the current function when the joystick is pressed down vertically.íDisplay menuîTake photosïZoomðCall, accept callìOKñCancelJ Enter numbers or letters.B On/Off/End key.A Call key<> Soft keys§Menu§ Displays a soft-key func-tion.C Press the joystick vertically, e.g., to call up the menu.D F E H I G Press the joystick in the direction indicated.= Function dependent on service provider, may require special registration.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fm23Standard functionsVAR Language: am; VAR issue date: 040819left page (23) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Standard functionsOption menusFunctions which appear repeatedly in the options menu are listed here.§Options§ Open menu.Edit Open the entry to edit.Display Display entry.Delete/Delete all Delete entry/delete all entries after confirmation.New entry Create new entry.Send... Select transmission service and medium for sending or printing.Reply/Reply to all The sender becomes the recipient, "Re." is placed in front of the subject matter and the received text is transferred into the new message.Save Store entry.Save to 9Save recipients in the cur-rent address directory.Sort Set sort criteria (alphabeti-cal, type, time).Text input (p. 27)T9 preferred: Activate/deactivate T9 input.Input language: Select language for text.Rename Rename selected entry.Capacity Display memory capacity.Attributes Display properties of the highlighted object.Help Display help text.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fmStandard functions24VAR Language: am; VAR issue date: 040819left page (24) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Highlighting modeWith some applications (e.g. Phone-book/Addressbook) one or more entries in a list can be highlighted to carry out a function jointly. §Options§ Open menu.Mark Activate highlighting mode. If a non-highlighted entry is selected, this can be highlighted:§Mark§ The current entry is high-lighted.If a highlighted entry is selected, the highlighting can be deleted:§Unmark§ Dehighlight the current entry.Additional highlighting functions:Menu speed diallingAll menu functions are numbered internally. A function may be selected directly by entering these numbers in sequence.E.g., write new SMS (from standby mode):CPress this key to display the main menu.5Press this key for Messages. 1Press this key to Write message.1Press this key for SMS.Mark all Highlight all entries.Deselect all Delete highlighting on all marked entries.Delete marked All selected entries are deleted.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fm25SecurityVAR Language: am; VAR issue date: 040819left page (25) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)SecurityThe phone and SIM card are pro-tected against misuse by several security codes.CodesC¢T¢Security¢Codes¢Select function.PIN controlThe PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not permit deactivating the control.§Selection§ Press this key.JEnter PIN.CConfirm input.§Change§ Press this key.CConfirm.Change PINYou can change the PIN to any 4 to 8-digit number you find easier to remember.JEnter current PIN.CPress this key.J, CEnter new PIN.J, CRe-enter new PIN.Keep these confidential numbers in a safe place where you can access them again if required.PIN Protects your SIM card (per-sonal identification number).PIN2 This is needed to set the charge detail display and to access additional functions on special SIM cards.PUKPUK2 Key code. Used to unlock SIM cards after the wrong PIN has been entered repeatedly.Phone code Protects your phone. Must be entered at the first security set-ting.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Startup.fmSecurity26VAR Language: am; VAR issue date: 040819left page (26) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)C¢T¢Security¢Codes¢Select function.Change PIN2(Display only if PIN 2 is available). Proceed as with Change PIN.Chg.phonecode(Change phone code)You define the phone code (4–8 dig-its) when you call up a phone-code protected function for the first time (e.g. Direct call, p. 35). It is then valid for all phone-code protected func-tions. Following the third unsuccessful attempt, access to the phone code and the functions that use it is denied. Contact the Siemens Service (p. 149).Clearing SIM card barringIf the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN) provided by your service provider with the SIM card in accordance with the instruc-tions. If the PUK (MASTER PIN) has been lost, please contact your serv-ice provider.Preventing accidental activationEven if PIN use is deactivated (p. 25) confirmation is required to switch on the phone.This prevents accidental activation of the phone, e.g. when you are carrying it in a bag or when you are travelling in an aircraft.BPress down. CPress. The phone switches on.§Cancel§ Press or take no action. The phone does not switch on.Connecting to Windows® PCsYou can connect your phone using IrDA or a data cable (accessories, p. 151) to a Windows® PC. The Windows® PC program MPM (Mobile Phone Manager, p. 131) enables you to backup data on your Windows® PC and to synchronise the Addressbook with Outlook®, Lotus Notes™ and other Siemens phones (as well as Gigaset). You can download the Mobile Phone Manager from the Internet at www.siemens-mobile.com/cx70
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Text.fm27Text entryVAR Language: am; VAR issue date: 040819left page (27) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Text entryText entry without T9Press number key repeatedly until the required letter appears. After a brief interval the cursor will advance. Example:2Press once briefly to type the letter a, twice to type b etc.Press and hold to write the number.Ä, ä, 1–9 Umlauts and numbers are displayed after the rele-vant letters.]Press briefly to delete the letter before the cursor, press and hold to erase the whole word.FMove the cursor (forwards/back).#Press briefly: Swap between abc, Abc, T9abc, T9Abc, T9ABC, 123. Status shown in top line of dis-play.Press and hold: All input-variants are displayed.*Press briefly: Special char-acters are shown.Press and hold: Open input menu.0Press once/repeatedly:. , ? ! ’ " 0 + - ( ) @ / : _ Press and hold: Writes 0.1Writes blank. Press twice = jumps a line.Special characters* Press briefly. The symbols chart is displayed1) Line breakI, FNavigate to characters.§Selection§ Confirm.1)¿¡ _; ! ?, .+-"’:()/*¤¥$£€&#\ @[]{}%~<=>|^§ Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Text.fmText entry28VAR Language: am; VAR issue date: 040819left page (28) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Input menuWith text input:*Press down: The input menu is displayed:Text format (SMS only)Input language Mark Copy/Insert Text entry with T9"T9" deduces the correct word from the individual key entries by making comparisons with an extensive dic-tionary.Activate, deactivate T9§Options§ Open text menu.Text input Select.T9 preferred Select.§Change§ Activate T9.Select input languageSelect the language in which you want to compose your message.§Options§ Open text menu.Text input Select.Input language Select.§Selection§ Confirm, the new language is set. Languages with T9 support are marked with the T9 symbol. Writing with T9Since the display changes as you pro-ceed,it is best if you finish a word without look-ing at the display.Simply press the keys once only where the relevant letter is located. For "hotel", for example:#Press briefly for T9Abc then4 6 8 3 5 1A blank ends a word.Do not use special characters such as Ä but rather use the standard charac-ters, e.g. A; T9 will do the rest for you.T9® Text Input is licensed under one or more of the following:U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945 928 and 6,011,554;Canadian Pat. No. 1,331,057;United Kingdom Pat. No. 2238414B;Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383;Euro.Pat. No. 0 842 463 (96927260.8)DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;and additional patents are pending worldwide.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Text.fm29Text entryVAR Language: am; VAR issue date: 040819left page (29) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)T9 word suggestionsIf several options are found in the dictionary for a key sequence (a word), the most probable is dis-played first. If the word you want has not been recognised, the next sug-gestion from T9 may be correct.The word must §highlighted§ be dis-played. Then press^again. The displayed word is replaced with a differ-ent word. If this word is also incorrect, press^again. press until the cor-rect word is displayed.If the word you want is not in the dic-tionary, it can also be written with-out T9.To add a word to the dictionary:§Learn§ Select.The last suggestion is deleted and the word may now be entered with-out T9 support. Press §Save§ to add it automatically to the dictionary.Correct a wordFMove left or right, word by word, until the required word is §highlighted§.^Scroll through the T9 word suggestions again.]Deletes the character to the left of the cursor and displays a new possible word!Additional informationWithin a "T9-word", individual letters may not be edited without first removing the T9-status. In most cases it is better to rewrite the complete word.0Set a full stop. The word is concluded if it is followed by a space. Within a word, a full stop represents an apostro-phe or hyphen:e.g. §provider.s§ = provider’s.EMoving the cursor to the right ends the word. #Press briefly: Switch between: abc, Abc, T9abc, T9Abc, 123. Status shown in top line of display.Press and hold: All input modes are displayed.*Press briefly: Select special characters (p. 27).Press and hold: Open input menu (p. 28).
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Text.fmText entry30VAR Language: am; VAR issue date: 040819left page (30) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Text modulesText modules can be stored in the phone for adding to your messages (SMS, MMS, e-mail). Write text modulesC¢M¢Text modules§Options§ Select New text.JWrite text module.§Options§ Open menu and select Save. Accept the specified name or allocate a new one.CSave.Use text modulesJWrite message (SMS, MMS, e-mail).§Options§ Open text menu.§Insert§ Select.I Select Text modules. ISelect text module from the list.§Selection§ Confirm. The text module is displayed.CConfirm. The text module is inserted in the message to the right of the cursor.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phone.fm31CallingVAR Language: am; VAR issue date: 040819left page (31) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)CallingDialling with number keysThe phone must be switched on (standby mode).JEnter the number (always with prefix/international dialling code). ] A short press clears the last digit, a long press clears the entire phone number.APress the Call key. The dis-played phone number is dialled.End callBPress the End key briefly. Press this key even if the person on the other end of the line has hung up first.Set volumeIRegulate the volume (only possible during a call).If a Car Kit is used, its volume setting will not affect the usual setting on the phone.Redial previous numbersTo redial the phone number last called:APress the Call key twice.To redial other numbers that were dialled previously:APress the Call key once.IPick out the phone number from the list.APress this key to select the phone number.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phone.fmCalling32VAR Language: am; VAR issue date: 040819left page (32) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)If the number is busyIf the called number is busy or can-not be reached because of network problems several options are availa-ble (depending on the service pro-vider). An incoming call or any other use of the phone interrupts these functions.EitherAuto redial§Auto dial§ The phone number is automatically dialled ten times at increasing time intervals. End with:B End key.OrCall back b§Call back§ Your phone rings when the busy number is free. Press the Call key to dial the number. Reminder§Prompt§ A beep reminds you to redial the displayed phone number after 15 minutes.Additional informationÐStore phone number in the Addressbook/Phonebook.§Handsfr.§Handsfree switch on (playback from loud-speaker).Always switch off "handsfree talking" before holding the phone to your ear! Otherwise, you will damage your hearing!*Press and hold to switch microphone off.International dialling codes0Press and hold until a "+" is displayed.§Country§ Press and select country.Phone number memoYou can enter a phone number during the call. The person to whom you are speaking can hear these entries. When the connec-tion has ended you can save or dial the phone number.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phone.fm33CallingVAR Language: am; VAR issue date: 040819left page (33) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Accept callThe phone must be switched on. An incoming call will interrupt any other use of the phone.CPress.OrAPress.A phone number and the name of the caller transmitted by the net-work will be displayed if the number is saved in the Phonebook/Address-book. A picture of the caller may also be displayed (p. 40).Reject call§Reject§ Press.OrB Press briefly. HandsfreeYou can put the phone aside during a call. You can then hear the caller via the loudspeaker. §Handsfr.§ Activate handsfree talk-ing.CSwitch on.IUse the joystick to adjust the volume.§Handsfr.§ Deactivate.Swapping between 2calls bEstablish a second connectionYou can call another number during a call.§Options§ Open call menu.Hold The current call is put on hold. JNow dial the new phone number or§Options§, select the Phone-book, Addressbook, or phone number.When the new connection is estab-lished:Warning!Please make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.Additional information*Press and hold to switch off the ringing tone and vibration.ÂMissed call display.Warning!Always switch off "handsfree talking" before holding the phone to your ear! Oth-erwise, you will damage your hearing!
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phone.fmCalling34VAR Language: am; VAR issue date: 040819left page (34) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)§Toggle§ Swapping between calls.Incoming calls during a callYou may need to register for this serv-ice with your service provider and set your phone accordingly (p. 92). Dur-ing a call, you may be advised that there is another call waiting. You will hear a special tone during the call. You have the following options:• Accept the waiting call in addition to the first§Toggle§ Accept the waiting call, putting the current call on hold to do so. Always proceed as above to swap between the two calls.•Reject the waiting call §Reject§ Press. Or§Forward§ The waiting call is divert-ed, for example, to the mailbox.• Accept the waiting call and end the current callBEnd the current call.CAccept new call.Ending call(s)BPress the End key. After the Return to held call? display, you have the following selection:§Yes§ You accept the call on hold.§No§ You end the 2nd call.ConferenceCall up to 5 parties one by one and link them together in a multiparty call. Some of the functions described may not be supported by your serv-ice provider or may have to be ena-bled specially. A connection has already been established: §Options§ Open menu and select Hold. The current connec-tion is maintained.JNow dial a new number. When the new connec-tion is established ...
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phone.fm35CallingVAR Language: am; VAR issue date: 040819left page (35) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)§Options§ … open menu and select Conference. The held call is joined.Repeat procedure until all partici-pants are linked together (up to 5participants).EndBAll calls in the multiparty conversation are ended when the End key is pressed. Call optionsThe following functions are only available during a call:§Options§ Open menu.Direct callIf this is active, only one number can be dialled.Switch onC¢T¢Security¢Direct callCConfirm selection.JEnter phone code.When first prompted you define and enter the phone code (4–8 digits).CConfirm selection.Hold Maintain current call.Microphone on If switched off, the person on the other end of the line cannot hear you (muting). Also: Press and hold *.Handsfree Call via the loudspeaker. Volume Adjust handset volume.Default book Phonebook/Addressbook.Conference (p. 34)Time/charges Display duration of call up to now and (if set) the charges incurred while the call is in progress.Send DTMF Enter tone sequences (numbers) for remote inquiries to an answering machine.Call transfer= Connect current call to a second call. For you, both calls are now ended.Main menu Access to the main menu.Call status List all held and active calls (e.g. participants in a con-ference).
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phone.fmCalling36VAR Language: am; VAR issue date: 040819left page (36) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Please do not forget this code (p. 25)! Ï/JSelect phone number from the Phonebook/Addressbook or enter it. CConfirm.Apply§Carola§ To dial the phone number (e.g. Carol’s phone num-ber), press and hold the right display key. Switch off#Press down:JEnter phone code.CConfirm input.Tone sequences (DTMF)You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists. These entries are transmitted directly as DTMFcodes (control codes).§Options§ Open menu.Send DTMFSelect.Using the Phonebook/AddressbookStore phone numbers and control codes (DTMF codes) in the Phone-book/Addressbook in the same way as a normal entry.JEnter phone number.0Press until a "+" appears in the display (wait for the connection to be estab-lished).JEnter DTMF codes (numbers).0If necessary, wait again for three seconds at a time for the receiver to process the entries safely.JEnter a name.§Save§ Store entry.You may also store just the DTMF codes (numbers) and then send them during the call.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MyPhone.fm37My phoneVAR Language: am; VAR issue date: 040819left page (37) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)My phoneAdjust your phone according to your own wishes in the following ways to give it a personal touch:Ringtones (p. 89)Assign individual ringtones to caller groups or special datesPictures (p. 129)Assign individual pictures or photos to your Addressbook entries.Animations (p. 88)Choose a start-up and closing anima-tion as well as a personal greeting.Screensaver (p. 87)Choose an analogue or digital clock, or a personal picture.(Operator) Logo (p. 87)Choose an individual picture (to be displayed in standby mode)Wallpaper (p. 87)Choose your own permanent back-ground image.Colour scheme (p. 87)Select a colour scheme for the user interface.Applications (p. 81)Download your own applications from the Internet.Where do I get what?You can purchase additional ring-tones, logos, animations and Java applications from your service pro-vider or directly from Siemens.Service supplier portalDepending on your service provider, you will find direct access to his por-tal on your telephone via menu items or bookmarks. Please contact your service provider for more infor-mation on these services.Siemens Mobile PortalYou will find additional ringtones, logos, animations and screensavers as well as more application, games and services in the Internet at this address:www.siemens-mobile.comOr you can download them directly via WAP:wap.siemens-mobile.comYou will also find a service for saving data here as well as a list of the coun-tries in which these services are available. My menuCreate your own menu with fre-quently (p. 106) used functions, phone numbers or WAP pages.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Pref_Book.fmDefault book38VAR Language: am; VAR issue date: 040819left page (38) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Default book C¢L¢Select function.Show entriesThe entries in the standard directory (Addressbook or Phonebook) are shown.J/ISelect a name with the first letter and/or scroll. New entryCreate new entry.Phonebook (see also p. 43)Address book (see also p. 39)Default bookYou can set a particulary directory as your preferred one to use. The selected standard book is opened in standby mode with the joystick.HOpen Phonebook or AddressbookAddress bookIn the Addressbook, a lot of data can be recorded for each entry and addi-tional functions such as pictures, birthdays, chat can be used.PhonebookThe Phonebook is located on the SIM card. Only one phone number can be entered per entry. The Phonebook on the SIM card can easily be trans-ferred into a different telephone.Business cardCreate your own business card to sent to a different GSM-phone. If no business card has been created yet, you will be asked for your input.HMove from field to field to enter your details. §Save§ Press.GroupsSee p. 42.<Info numbers>See p. 45.Additional informationThe content of the business card corre-sponds to international standards (vCard).ÏCopy numbers from Address-book/Phonebook.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Adressbook.fm39Address bookVAR Language: am; VAR issue date: 040819left page (39) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:05)Address bookThe Addressbook can store up to 1000 entries, each with a variety of telephone and fax numbers as well as additional address details. These entries are managed separately from those in the Phonebook in the phone memory. However, you can exchange data between the Addressbook and the Phonebook on the SIM card.New entryThe address book is set as standard:HOpen Addressbook (in standby mode)CDisplay input fields.ISelect requiredinput fields.JFill in input fields. The maximum number of characters available is shown at the top of the display. At least one name must be entered. Always enter phone number with pre-fix. Possible input fieldsAdditional informationGroup: Allocation to a group (p. 42).Address: Extension to enter the complete address:Street:, ZIP:, City:, Country:Com. servicesInformation if the entry is being used as a chat room contact (p. 69) or for Walky talky (p. 115) :Nickname:, Walky Talky ID:, Walky Talky type:, WV user ID:, ICQ number:,AIM screen name: Last name: URL:First name: Com. services >> Phone number: Group:Phone no./office: Company:Phone no./cell: Address: >> Fax: Birthday: >> Fax #2: Picture:E-mail address:Email #2: All fields
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Adressbook.fmAddress book40VAR Language: am; VAR issue date: 040819left page (40) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:05)Birthday: After activation, the date of birth is entered. Reminder: The telephone reminds you one day before the birthday at the time entered.Picture: Assign a picture to the entry. It is displayed if you are called by the corre-sponding phone number.All fields/Reduced fieldsDisplay of number of input fields.§Save§ Save the entry.Display/find entryHOpen Addressbook (in standby mode).ISelect required entry.CDisplay.Display options§Options§ The options menu only ever offers the functions for the currently selected input field. Additional informationÎTemporary switch to Phone-book.SynchronisationThe Siemens MPM (Mobile Phone Mana-ger, p. 131) makes it possible to manage the Addressbook using Windows® PCs.Using Remote sync. you can synchronise your mobile with an organiser stored on the Internet (see also p. 125).Move to ... Allocate current or high-lighted entries to a group.Display Display an allocated pic-ture.Copy to SIM Copies name and one phone number to the SIM card (Phonebook).New SMS, New MMS, New e-mailCreate a message with the selected entry.Browser Start WAP browser and visit URL.Chat room Begin chat p. 69.Talk to Start Walky talky session (p. 116).(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Adressbook.fm41Address bookVAR Language: am; VAR issue date: 040819left page (41) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:05)Change entryHOpen Addressbook (in standby mode).ISelect required entry.§Edit§ Press.ISelect input field.§Edit§ Open entry. JMake changes.§Save§ Save.Dialling an entryHOpen Addressbook (in standby mode).J/ISelect a name with the first letter and/or scroll. AThe number is dialled.If there are several numbers in the address book entry, these are offered for selection.ISelect phone number.AThe number is dialled.Address book optionsDepending on the actual situation, different functions will be offered. These functions can be applied to the entry currently selected as well as to multiple selected entries:§Options§ Open menu. Move to ... Allocate current or high-lighted entries to a group.Copy to SIM Copies name and number to the SIM card (Phone-book).Filter Only those entries which match the filter criteria are displayed.Import Set up readiness to receive for a Phonebook entry via IrDA (p. 97) or SMS (p. 51).Sort Specify sorting criteria for output of the Addressbook entries.Search Enter search term.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Adressbook.fmAddress book42VAR Language: am; VAR issue date: 040819left page (42) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:05)GroupsNine groups are specified in your phone to enable you to arrange your Addressbook entries clearly. You can rename seven groups.HOpen Addressbook (in standby mode).<Groups> Select (the number of entries is listed behind the group name). ISelect group. Groups menu§Options§ Open menu.Ringing tone for groupAssign a ringtone to a group that plays when one of its members calls you. C¢T¢Ring tones¢Group callsISelect group.CConfirm. If a ringtone has already been set, it will be played. Otherwise, the ringtone list will be dis-played and you can select one. I If necessary, select a ringtone.CConfirm. Rename group Change name of group.Group symbol Assign a symbol to a group. The symbol must then appear in the display when one of the group members calls.Additional informationNo group: Contains all Addressbook entries that do not belong to a group (name cannot be changed).Received: Contains Addressbook entries received by IrDA (p. 97) or SMS (p. 51) (name cannot be changed).
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phonebook.fm43PhonebookVAR Language: am; VAR issue date: 040819left page (43) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)PhonebookEntries in the Phonebook (on the SIM card) are managed separately from those in the Addressbook. You can, however, exchange data between the Phonebook and the Address-book.New entryIf the Phonebook has been selected as standard:HOpen Addressbook (in standby mode).H Select <New entry>.CDisplay input fields.ISelect input field.JFill in input fields. The maximum number of characters available is shown at the top of the display. Phone number:Always enter phone number with prefix. An entry is not saved without a phone number.Name: Enter first and/or last names.Group:Important phone numbers are com-bined together in a group (VIP). This is independent of the Addressbook groups.Location: Default SIMSpecial SIM cards can save phone numbers in a protected area (SIM pro-tected) (PIN2 required).Record #: Each entry is automatically assigned a record number. You can also dial using the record number. §Save§ Press to store the new entry.Additional informationÎTemporary switch to Address-book.§Country§ International dialling code... p. 32Funktionen zur Text entry..................p. 27
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phonebook.fmPhonebook44VAR Language: am; VAR issue date: 040819left page (44) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Call (search for an entry)HOpen Phonebook.J / ISelect a name with the first letter and/or scroll.ANumber is dialled.Call using record no.A record number is automatically assigned to every new entry in Phonebook.JEnter record number.#Press.APress.Change entryISelect entry in Phone-book.§Edit§ Press and select Edit.ISelect desired input field.JMake changes.§Save§ Press.Phonebook optionsThe following functions are available, depending on the current situation. §Options§ Open menu.Copy to 9Copy all highlighted entries to the Address-book.Copy all to 9Copy all entries to the Addressbook.Delete all The entire Phonebook is deleted. PIN-pro-tectedImport Set up readiness to receive for a Phone-book entry via IrDA (p. 97) or SMS (p. 51).(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Phonebook.fm45PhonebookVAR Language: am; VAR issue date: 040819left page (45) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)<Special books>HOpen Addressbook (in standby mode).<Special books>Select.<Own numbers>Enter "own" phone numbers in Phone-book (e.g., fax) for information. These numbers can be changed, deleted and also sent as an SMS message.<VIP numbers>Display the phone numbers saved in the VIP group.<SIM phonebook> Entries stored in the Phonebook on the SIM card can also be used on other GSM phones.<Protected SIM> bOn special SIM cards, phone num-bers can be stored in a protected location. PIN2 is required for editing. <Service nos.>/<Info numbers>There might be phone numbers saved in your Phonebook that have been provided by your service pro-vider. They may be used to call local or national information services or to use services offered by your service provider.Phone number extensions in the PhonebookDigits may be replaced by a "?" when phone numbers are entered in the Phone-book/Addressbook:*Press down:These wildcards must be replaced with numbers before dialling (e.g., with the extension numbers in a phone system). To make a call, select the phone number from the Phonebook/Addressbook.APress.JReplace "?" with numbers.ANumber is dialled.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Records.fmCall records46VAR Language: am; VAR issue date: 040819left page (46) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Call recordsThe phone number of a caller is dis-played if • the caller has switched off the Incognito function and • the network supports the "Caller Identity" function. Alternatively, a caller’s name is dis-played if it is stored in the Phone-book / Addressbook.Your phone stores the phone num-bers of calls for convenient redial-ling. C¢P ISelect record.COpen call list.ISelect phone number.ADial phone number.Or§Display§ Display information on the phone number.Up to 500 entries are stored in the records:Missed calls bThe phone numbers of calls that you have received but not answered are stored for call back purposes.ÂIcon for missed call (in standby mode). Press the display key beneath the symbol to call up the Inbox (p. 50). Calls receivedAccepted calls are listed. Calls dialedAccess to the last numbers dialled by you.AFast access in standby mode.Delete recordsThe records are deleted. Call list menuThe records menu can be called up if an entry is highlighted.§Options§ Open menu.Copy to 9/ Copy to SIM Copy the currently selected phone number into the preferred direc-tory. (For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_TimeCharge.fm47Dur./chargesVAR Language: am; VAR issue date: 040819left page (47) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Dur./chargesYou can display the charges and duration during a call. You can set a unit limitation for outgoing calls. C¢P¢Dur./chargesSelectLast call All outg. calls All incoming Remain. unitsCharge settingISelect.COpen report or settings.§Reset§ Reset the selected report.Charge settingCOpen menu.CurrencyEdit your currency.Charge/Unit (PIN 2 prompt)Enter the currency as well as the charge per unit and time.Account limit (PIN2 prompt)Special SIM cards allow you or the service provider to define a credit or a period after which the phone is barred for outgoing calls.§Edit§ Press.JEnter PIN2.Account limitSwitch on.JEnter number of units.§OK§ Confirm.Then confirm the credit or reset the counter. The status display for pre-paid cards may vary depending on the service provider.Auto displayCall duration and charges are automatically displayed.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Camera.fmCamera48VAR Language: am; VAR issue date: 040819left page (48) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)CameraYou can view photos/videos recorded on the integrated camera immediately,• use the photo as a background image, logo, a switch on/off animation or a screensaver.• send the photo/video via MMS or e-mail.Switch onC¢R OrDStarts camera in standby mode.ÑSwitch over to single imageÒand video recording.The current (preview) image is dis-played. You will see the following in the first line from left to right:ÙBrightnessÚZoom factor.ÛWhite balance.×Flash connected.In the top right-hand corner of the preview image, the number of pho-tos which can still be taken in the selected resolution is displayed. This number varies considerably from motif to motif (storage space required). Beneath the preview image, you will find a reference to the selected resolution. In video mode, the recording time already used and the maximum recording time still available is shown here.Photo modeCTakes a photo.CDisplays the preview image of the next photo.The photo is saved with a name, the date and the time. To enter the name, see Setup in the options menu.Settings prior to taking a photo:FSetting the brightness.ISets the zoom factor.Image resolutionA setting can be made for the quality of the image regardless of the pre-view image resolution. è CameraÙÚ × PremiumÒìOptions24
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Camera.fm49CameraVAR Language: am; VAR issue date: 040819left page (49) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)The resolution may decrease depending on the selected digital zoom.Video modeThe video mode resolution is the same as the preview image resolu-tion.CStart the video recording.CTerminate the video recording.A red point appears in the top right in the display while the video record-ing is being made. §Play§ Plays the video recording.Flash (Accessories)If the flash is active, this is shown by a symbol in the display. The flash is constantly loaded while connected to the telephone. This reduces the stand-by time.×This symbol appears when the flash is being loaded.Seettings, see options menu.Camera optionsThe following functions are availa-ble, depending on the current situa-tion.§Options§ Open menu.Premium: 640 × 480 (VGA)High: 320 × 240 (QVGA)Medium: 160 × 120 (QQVGA)Background:132×176Settings • Name for recordings• Image resolution.Pictures Displays list of photos.Other videos Display the video list.Microphone on Switches the microphone on or off. Use flash Choose between: Automatic, Off, Red-eye Auto-timer The photo is taken approx. 15 seconds after trigger-ing. For the last 5 seconds, you will hear a signal tone each second.White balance Choose between: Automatic, Indoor, Outdoor(For standard functions see p. 23)Additional informationÊInsufficient memory available. Start the memory assistant to delete specific data (p. 94).A mirror can be attached to the rearside of the telephone depending on the telephone variant. This makes it easier to make self portraits.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_UnifiedInbox.fmInbox50VAR Language: am; VAR issue date: 040819left page (50) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)InboxThe central input folder offers imme-diate access to the messages cur-rently received. This means that you no longer have to look through all input folders for the various mes-sage types. The entries are marked with a symbol to indicate their type and status. You will find a list of the symbols on p. 15.To call up the central input folder, e.g. if a new SMS has been received:çPress the display key beneath the symbol.OrEIn standby mode:In the central input folder, you will find the following message types:SMS, MMS, E-mail System messages:Message about MMS, Missed alarm, Missed appts., Missed calls, WAP push, Voice messageData objectsRing tones, Pictures and Video, calen-dar entries, Notes and Business card.CWhen you open an entry, the relevant application also starts. After a set time span, entries which have already been read and opened are only displayed in the message-related incoming lists (see Setup in the options menu). Main Inbox options§Options§ Open menu.Receive e-mail Select set access and send all e-mails.Setup If entries have been read, remove them from the Main Inbox:Daily, Never, ImmediatelyIf Daily has been selected, specify the time.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SMS.fm51SMSVAR Language: am; VAR issue date: 040819left page (51) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)SMSYou can transmit and receive very long messages (up to 760 charac-ters) on your phone. They are auto-matically composed of several "nor-mal" SMS messages (note higher charges).Additionally you can insert pictures and sounds in an SMS.Write/sendC¢M¢Create new¢SMSJEnter text. You will find informatio-nen on writing texts with and without T9 in the chapter "Text entry" (p. 27). The following is displayed in the to display line: Text entry status, number of SMS required, number of characters still available.AStart sending procedure.Ï/JSelect phone number from the Phonebook/Addressbook or enter it. §Group§ If necessary, select a group.CConfirm. The SMS is trans-mitted to the service cen-tre to be sent and saved in the Sent items list.Text options§Options§ Open menu..Save Save composed text in draft list.Picture&sound Add pictures, animations and sounds into message (see following text).Text modules Insert text module (p. 30). Format Font size: Small font, Medium font, Large fontUnderlineAlignment: Default alignm., Left, Center, RightMark (highlight text with the joystick)Delete text Delete the whole text.Send with... Select SMS profile so the SMS can be sent.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SMS.fmSMS52VAR Language: am; VAR issue date: 040819left page (52) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Picture&soundSend the pictures and tones with or without accompanying text. Remember that these may be pro-tected (DRM, p. 21).The text input field is open:§Options§ Open menu.I Select Picture&sound. The menu contains:Def animations Def. sounds My anim. My pictures My sounds ISelect area.CConfirm. The first entry of the selected section is dis-played.IScroll to entry required.For Def animations/Def. sounds:CThe selection is added to the SMS.For My anim./My pictures/My sounds:CThe selection is displayed/played back.CThe selection is added to the SMS.The pictures which have been added are displayed, sounds are displayed in the form of "wildcards". SMS to groupYou can send an SMS message as a "circular" to a recipient group.§Options§ Open menu.Send Select.§Group§ The list of groups is displayed.ISelect group.COpen group and highlight all/individual entries.CA safety inquiry is made and then sending is started.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SMS.fm53SMSVAR Language: am; VAR issue date: 040819left page (53) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)ReadpArrival of a new SMS announced in the display. Open it with the display key beneath it Main Inbox (p. 50).CReading the SMS.IScroll through message line by line.ReplyYou can answer the SMS now open immediately. The new additional text is placed above the received text.CFunctions for a direct reply.Reply optionsCReply immediately.Read options§Options§ Open menu.çSMS01.10.2004 19:42+ 12398765431Text of SMS . . .Delete ìOptionsWrite message Create a new reply text.Edit Edit received SMS or add new text.Answer is YES Add Answer is YES to the SMS.Answer is NO Add Answer is NO to the SMS.Call back, Delay, Thanks Add a standard text as a reply to the SMS.Reply See "Reply options" above.Picture&sound Save picture/sound contained in the SMS.Zoom in Enlarge/reduce text display. Archive Move SMS message to archive.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SMS.fmSMS54VAR Language: am; VAR issue date: 040819left page (54) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)ListsAll SMS messages are archived in dif-ferent lists, according to their status. (List of message symbols, see p. 15):InboxC¢M¢Inbox¢SMSThe list of received SMS messages is displayed.DraftC¢M¢Draft¢SMSThe list of not yet transmitted SMS messages is displayed.UnsentC¢M¢Unsent¢SMSThe list of concatenated SMS mes-sages not yet completely sent is dis-played. Transmission can be restarted.SentC¢M¢Sent¢SMSThe list of sent SMS messages is dis-played.SMS archiveC¢M¢SMS archiveThe list of SMS messages stored in the phone is displayed. List optionsDifferent functions are offered depending on the list. §Options§ Open menu.Send Send or forward entry.Send with... Select an SMS profile for transmission.Archive Move SMS message to archive.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SMS.fm55SMSVAR Language: am; VAR issue date: 040819left page (55) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)SettingSMS signatureC¢M¢Msg settings¢SMS¢SMS signatureYou can enter a “signature” with a maximum of 16 characters. This sig-nature will then be attached to each SMS except §Reply§ and when changes are made to an existing SMS.SMS profilesC¢M¢Msg settings¢SMS¢SMS profilesUp to 5 SMS profiles can be set. The transmission characteristics of an SMS are defined in these. The pre-setting depends on the SIM card inserted.Activate profileISelect profile.CActivate.Set profileISelect profile.§Edit§ Open to edit the profile.Service center Enter the phone numbers for the service centre as provided by the service provider.Recipient Enter a standard recipient for the profile.Message type •Manual: Inquiry for all mes-sages.•Standard text: Normal SMS message.•Fax: Transmission via SMS.•E-mail: Transmission via SMS.•New: You may need to obtain the required code number from your service provider.Validity period Period in which the service centre is to try to deliver the message:Manual, 1 hour, 3 hours, 6 hours, 1 day, 1 week, Maximum* * Maximum period that the service provider permits.Status report = Receive confirmation of suc-cessful/failed transimssion of a message. This service may be subject to a charge.Direct reply = If activated, the reply to your SMS message is handled via your service centre (for infor-mation, please contact your service provider).SMS via GPRS = Sent SMS automatically via GPRS (p. 97).Save aft. send Sent SMS messages are saved in the Sent items list.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SMS.fmSMS56VAR Language: am; VAR issue date: 040819left page (56) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)More information on SMSSMS status reportIf the message cannot be transmit-ted to the service centre you are offered the chance to repeat the transmission. If this also fails, con-tact your service provider. The Mes-sage sent. message only indicates transmission to the service centre. This will then attempt to relay the message within a certain period.See also Validity period (p. 55)..Phone number in SMSPhone numbers displayed in the §highlighted§ text can be dialled (A) or saved in the Phonebook/Address-book.Downloading ringtones and logosYou can receive links for download-ing ringtones, logos, screensavers, animations and information about applications with an SMS. Please highlight this link and, by pressing the Call key A, start the download. Please check that the dial-in access (p. 98) is configured.Remember that these may be pro-tected (DRM, p. 21).ã SIM memory fullIf the message icon flashes the SIM memory is full. No more SMS mes-sages can be received. Messages must be deleted or archived.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fm57MMSVAR Language: am; VAR issue date: 040819left page (57) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)MMSThe Multimedia Messaging Service enables you to send texts, pictures/videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show".Depending on your phone's settings, you will receive either the complete message automatically or notifica-tion that an MMS has been saved in the network, giving sender and size details. You may then download it to your phone to read it. Ask your service provider whether this service is available. You may need to register for this service sepa-rately.Create C¢M¢Create new¢MMSAn MMS consists of the address header and the content. An MMS may consists of a series of pages. Each page may contain a text, a picture/video and a sound. Remember that pictures and sounds may be protected (DRM, p. 21).Write texts with the help of T9 (p. 27).Pictures and videos can be recorded with the integrated camera and/or loaded from My stuff (p. 129).You can record Sounds with the sound recorder and/or load them from My stuff (p. 129). First select an object for processing to be added to the first page of the MMS:Pictures/videosLimits on picture size can be set in the user settings.<Picture> Select.CDisplay picture/video functions:Insert imageOpen list to select a picture.Insert videoOpen list to select a video.CameraActivate the camera to take a photo or record a video for the MMS (p. 48). R Also possible.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fmMMS58VAR Language: am; VAR issue date: 040819left page (58) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)OpenDisplay picture.DeleteDelete inserted picture/video.SaveSave picture/video for use later on.PropertiesDisplay properties, incl. any user right restrictions (p. 21).Sounds<Sound> Select. CDisplay sound functions:Insert soundOpen list to select a tone.RecordActivate tone recording in order to record tones (p. 121).m Also possible.OpenPlay back the tone.DeleteDelete inserted tone.SaveSave tone for use later on.PropertiesDisplay properties, incl. any user right restrictions (p. 21).Text<Text> Select and write the text.CThe text functions are dis-played (see also p. 27):Insert fromChoose any of the following for insertion: Text modules, Bookmark, Insert from d Delete textDelete text on current page.SaveSave text on the page as text mod-ule.Text inputT9 settings:T9 preferred, Input languageMarkText processing together with Copy and Insert.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fm59MMSVAR Language: am; VAR issue date: 040819left page (59) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Generation options§Options§ Open menu. lawTemplatesC¢M¢MMS templatesMMS templates are saved MMS with not address. They can be sent as new MMS or used as part of a new MMS. A maximum of 10 templates can be saved.Create templates by writing a new MMS or using an MMS which you have already received. §Options§ Open menu and select Save as templ.Send MMS Send MMS.Play Play entire MMS on the display.Picture... See above.Sound... See above.Text... See above.Page Add page: Insert new page behind current one.Delete Page: Delete cur-rent page.Page list: Display available pages.Timing: Set the temporal sequence of the MMS pres-entation:•Page duration:Automatic or Manual •Show page:Only if Manual is set in front of it. Enter the lifespan of a page.Properties Enter sending parameters (see next chapter).Save as templ. After creating MMS, save it as a template. See also below:Layout Select one of four possible layouts:Text above, beneath, beside (on left or right) of picture.Colors Select the colours for:•Message •Page •Bitmap •Text backgrd. •Text color (For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fmMMS60VAR Language: am; VAR issue date: 040819left page (60) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Sending an MMSThe page(s) of the new MMS is (are) already created and the MMS is dis-played.AOpen address entry.Subject: Enter a brief description.Send to: Enter one or more phone number(s)/e-mail address(es). Ï Insert from Addressbook.Size: Display the size of the cur-rent MMS.AStart sending procedure. CThe MMS is sent after con-firmation.Expanded address fieldsIScroll downwards.More: Provide additional address fields.Cc: Address(es) of copy recipient(s).Bcc: Address(es) of copy recipient(s) who are not visible to the other recipi-ents.Attachments:Insert attachments.Date: Creation date.Use delivery time:Usee specified send time. If §Yes§:Delivery date:Send date.Delivery time:Send time.Icons for status informationÞPriorityßSend report.áContains DRM (p. 21). ç MMSSubject:Greetings from LondonSend to:+1234567654321 |Size:85 KBÞßá ]ìOptions
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fm61MMSVAR Language: am; VAR issue date: 040819left page (61) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Sending options§Options§ Open menu.Receiving an MMSDepending on the setting, an MMS can (p. 63) be received in two ways:Complete transmissionThe complete MMS is sent to your telephone. This can take quite long if the MMS is large. Thus, the request to switch to GPRS is displayed before reception, if need be.çShown in the display.<Start reception. The MMS is sent.Preliminary notificationYou are notified that an MMS is awaiting reception.wShown in the display.<Read the notification. Display the size of the MMS in KB.§Accept§ The complete MMS is sent.§OK§ Display in Inbox.Send MMS Send MMS.Play Play entire MMS on the display.Edit Object selection to change an object.Add addressee Add recipient from the cur-rent address directory.Del. addressee Delete individual recipient.Add attch-mnt. Add attachment:•File •Business card •Appointment Page list Display MMS pages for viewing and/or changing.Save as templ. After creating MMS, save it as a template.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fmMMS62VAR Language: am; VAR issue date: 040819left page (62) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Reading an MMSAn MMS has been fully received.ISelect the MMS.CStart automatic playing of the MMS.Key functions for playback:ETo the next page.DPress briefly once to return to the start of the current page; press briefly twice to return to the start of the previous page.ISet volume.C/BTerminate.When the MMS is complete, the message details are displayed.Subject: Description of the MMS.From: Information about the sender.Size: Size of the MMS in KB.Expanded address fieldsIScroll downwards.More: Additional input fields.Cc: Copy recipient.Attachments:Save attachments.Date: Reception date.Symbols for status information(see p. 60)ListsAll MMS are saved in four different lists (list of message icons, see p. 15):InboxC¢M¢Inbox¢MMSThe list of MMS messages and notifi-cations received is displayed. To receive an MMS subsequently, open notification and press §Accept§. DraftC¢M¢Draft¢MMSThe list of stored drafts is displayed.UnsentC¢M¢Unsent¢MMSThe list of the MMS messages not yet completely transmitted is displayed.SentC¢M¢Sent¢MMSThe list of sent MMS messages is dis-played.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fm63MMSVAR Language: am; VAR issue date: 040819left page (63) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)List optionsDifferent functions are offered depending on the list/situation.§Options§ Open menu.SettingC¢M¢Msg settings¢MMS¢Select unction.MMS profile:Six MMS profiles can be set (5 in the telephone memory, one on the SIM card). The send properties can be specified in them. If the setting has not yet been set, you will receive the necessary data from the service pro-vider or via the "Setting Configura-tor" at (p. 133): www.siemens-mobile.com/mobilescustomercareActivate profileISelect profile.§Options§ Open menu and select Activate.Set profileISelect profile.§Options§ Open menu and select Change sett.Play Play MMS on the dis-play.Edit Display MMS for processing.Display Display MMS for view-ing only (write-pro-tected).Send MMS Send MMS.Reply MMS Reply to MMS immediately.Forward MMS Enter recipient(s) for forwarding.Properties Display message parameters.Receiv.all MMS Send all new MMS immediately.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MMS.fmMMS64VAR Language: am; VAR issue date: 040819left page (64) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)User settingsSet the MMS dispatch to suit your requirements: Delivery report: Request delivery confirma-tion for sent messages.Read reply: Request confirmation that the MMS has been read.Default priority: Send priority: Normal, High, Low Validity: Select the period in which the service centre is to try to deliver the message:Manual, 1 hour,3 hours, 6 hours, 1 day, 1 week, Maximum* * Maximum period that the service provider permits.Earliest deliv. time: Transmission from the service centre to the recipi-ent:Immediate, Tomorrow Default duration: Length of display for an MMS page (standard requirement).Retrieval: Receive complete MMS or only notification of arrival.Immediate Receive complete MMS immediately.Auto.homenet Receive complete MMS immediately in home net-workManual Only receive the notifica-tion.Spam filter: Settings for receipt of pro-motional MMS.Size indica-tion: = Set max. message size and message handling.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Email.fm65E-mailVAR Language: am; VAR issue date: 040819left page (65) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)E-mailYour phone has an e-mail program (client). You can use it to create and receive e-mails.WriteC¢M¢Create new¢E-mailEnter the address data for the e-mail:Send to: Enter one or moreE-mail address(es). Ï Insert them from the Addressbook/Phone-book.Subject: Enter e-mail heading (up to 255 characters).Content Enter text. To send:§Options§ Open menu.Send e-mailSelect.OrAll fields Opens additional input fields. Cc: Address(es) of copy recip-ient(s).Bcc: Address(es) of copy recipient(s) who are not visible to the other recipi-ents.Attachments:Add attachments such as images and sounds.OptionsDifferent functions are offered depending on the position of the cursor.§Options§ Open menu.Send e-mail Send e-mail.Send later Transfer e-mail into the Unsent list.Save Save e-mail in the Draft list.Add addressee Add recipient from the current address direc-tory.Delete line Delete current line.Insert from Text modules Bookmark Ï Insert them from the Addressbook/Phonebook.Add attchmnt. My stuff Open to make a selection. Remember that pictures and sounds may be pro-tected (DRM, p. 21).Delete text Delete the whole text.Text input •T9 preferred •Input language
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Email.fmE-mail66VAR Language: am; VAR issue date: 040819left page (66) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Receive/readC¢M¢Inbox¢Select function.Before an e-mail can be read, it must be retrieved from the server. You have two options:Retrieve emailOnly the message header in Main Inbox (p. 50) is sent. You can then decide if you also want to receive the contents:§Options§ Open menu and select Ret. content.or want to delete the e-mail on the server:§Options§ Open menu and select Del. on server.Send/receiveThe set access is selected and all e-mails transferred into Main Inbox (p. 50). At the same time, completed e-mails are transferred from the Unsent list. AttachmentsContains the e-mail attachments, these can be saved in My stuff (p. 129).§Options§ Open menu and select Save attach. ListsAll e-mails are saved in different lists depending on their status (list of message icons, see p. 15):InboxC¢M¢Inbox¢E-mailThe list of received e-mails is dis-played. DraftC¢M¢Draft¢E-mailThe list of e-mails not yet transmit-ted is displayed.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Email.fm67E-mailVAR Language: am; VAR issue date: 040819left page (67) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)UnsentC¢M¢Unsent¢E-mailThe list of e-mails not yet transmit-ted is displayed. SentC¢M¢Sent¢E-mailThe list of transmitted e-mails is displayed.List optionsDifferent functions are offered depending on the list.§Options§ Open menu.SettingC¢M¢Msg settings¢E-mailBefore using this service you must set the server access and your e-mail parameters. You will receive the necessary data from the service pro-vider or via the "Setting Configura-tor" (p. 133) at: www.siemens-mobile.com/screensaverAccountsISelect account.COpenActivating accessISelect access.CActivates accessSet accessISelect access or <Empty>.§Edit§ Start the processing and fill in the data fields as specified by the service provider.Retrieve email Only transfer the message header into Main Inbox (p. 50).Ret. content Fetch the contents from the server if only the message header was received.Del. on server Delete message on the server.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Email.fmE-mail68VAR Language: am; VAR issue date: 040819left page (68) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Account sett.*Your service provider will supply you with this information.§Save§ Save settings.General sett.Enter an e-mail address to which a Bcc (blind carbon copy) is always sent.Provider: Select provider.User name: Your name.E-mail address: *Your e-mail address, e.g.: name@domain.abcReply address: Additional e-mail address for replies.User ID: * Your user ID.Password: * Your password.Only downl. emails smaller than<10> KBSet maximum size for incoming e-mails.Copy on server: E-mails remain on the server after they have been retrieved or are deleted.Download mode: Subject only, whole e-mail, prompt.Server type: Select POP3 or IMAP4.POP3 server: * Enter Internet address if the server type is POP3 and SMTP.POP3 port: * (Default: 110)IMAP4 server: * Enter Internet address if the server type is IMAP4 and SMTP.IMAP4 port: * (Default: 25)SMTP server: * Enter Internet address.SMTP port: * (Default: 25)SMTP authentic.: Authentication: Yes/NoSMTP password: A user password will be required if "Authentication" is set to Yes.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fm69Chat roomVAR Language: am; VAR issue date: 040819left page (69) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Chat room bWith this function you can transfer text, audio clips, pictures and files straight to and from one or more ter-minals (mobile phone, PC). This function is not offered by all service providers. Please ask your service provider about this.Your dialogue partners are entered in contact lists. When a connection has been established, these lists show who is available, whether they want to be disturbed and what mood they are in. GPRS must be switched on.C¢M¢Inst. MessageStart menuLogin Select the access via which the dialogue runsor Account: select (p. 74).Msg. historyRead the messages from the last meeting.Setup Settings for your repre-sentation, the applica-tions and servers.Exit End application.Rapid access ...Select the access (p. 74)C¢M¢Chat room¢LoginThe current contact list or the list is displayed (if necessary, set access first, p. 74).Specify your own status (p. 75)§Options§ Open menu.My settingsSelect and make entries. BReturn to contact list.Enter new contact§Options§ Open menu.Set Press, then:Add contactselect and enter the user ID at least.BReturn to contact list.Inst. Message with new contact (p. 73)ISelect the contact.CStart Inst. Message.COpen editor.JWrite text. CSend text.... etc.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fmChat room70VAR Language: am; VAR issue date: 040819left page (70) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)LoginC¢M¢Chat room¢LoginSelect the last access to be used (see also Automatic login: p. 75).Contact listsWhen the connection has been established, the contact list or the list of the contact lists is shown for selection.In the contact list, you will find a list of the most recently used contacts. The first time you log in, an “empty” contact list will be generated by the server if necessary.Displays in the list:-ConversationDisplays of the online contacts for the messages are available.-OnlineOnline contacts with whom no con-versation is being held at the moment.-Group bGroups for Inst. Message with sev-eral contacts.-OfflineContacts who are not online at present.Managing the contactsISelect a contact.§Options§ Open menu.Set Select. ContactsDifferent functions are offered depending on the selection:Add contact User ID: Enter a non-ambiguous user (login) name.Nickname: Enter your own nick-name for the contact.Friend: The contact receives the status Friend: and access to personal infor-mation (p. 75).Find contact Search for contact.Delete contact Delete contact from the list.Block contact No more messages are received from the con-tact and the contact receives no status infor-mation from you. This function works for all your lists.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fm71Chat roomVAR Language: am; VAR issue date: 040819left page (71) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Managing the groups bISelect one of the groups you set up yourself.§Options§ Open menu.Set Select. Group settingsDifferent functions are offered depending on the selection:Add member Add a new group member, see also Add contact (p. 69).Find member Search for group member.Invite Invitation to the contacts in your own group to Inst. Message.Delete member Delete contact from the group member list.Add group Add new group.Find group Search for group on the server (no longer in the "administered groups" list). Create group Group ID: Enter a non-ambiguous group name.Name: Name of group.Topic: Topic of group.Searchable: Other people can look for the group.Welcome msg.: Enter welcome text.Create group Delete group.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fmChat room72VAR Language: am; VAR issue date: 040819left page (72) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Creating a new contact listThe current contact list is displayed.§Options§ Open menu.Contact listsAvailable contact lists are displayed. §Options§ Open menu.Create Select. Contact list ID:Give the contact list its own, specific name.Name: Allocate self-explanatory names.CConfirm.Contact list options§Options§ Open menu.Details =Additional information about the contact or the group.My settings Information on your cur-rent personal status (p. 75).Set Functions for managing a contact or a group.Contact lists Display contact lists for selection.Block list Display all blocked con-tacts. Can be unblocked.App. settings Set the application (p. 75).Exclude Terminate the applica-tion, the server remains connected.Logout Log off from the server and return to start menu.Help Display help text.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fm73Chat roomVAR Language: am; VAR issue date: 040819left page (73) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Start chatA contact list must be displayed.ISelect a contact or a group. CStart communication with the contact. The page is displayed. During Inst. Message with a group, the name of the sender is placed in front of each contribution.COpen editor.JWrite text CSend text. The text appears in the chat soon afterwards.Naturally, you can also receive mes-sages from contacts whom you do not know. This will be pointed out to you in the display, and you can either switch to Inst. Message or ignore/block the contact. Options (individual contact)§Options§ Open menu.Send sound =Select and send a melody/tone from the list (DRM p. 21).Send picture =Select and send a picture from the list (DRM p. 21).Send other =Send any file.Details Information about the con-tact (if this is authorised by him).Clear all Delete all texts in the cur-rent Inst. Message.Block contact No more messages are received from the contact and the contact receives no status information from you. This function works for all your lists.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fmChat room74VAR Language: am; VAR issue date: 040819left page (74) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Options (group contact) b§Options§ Open menu.Receiving objects bYou will be informed in the display if sounds or pictures are sent to you during a dialogue. §Accept§ Accept object.or§Reject§ Reject object.Msg. historyC¢M¢Chat room¢Msg. historyThe messages from the last meeting are displayed. You can read and delete the contributions.Requirement: The server must be disconnected, see Exclude (p. 72) and Automatic login: (p. 75).SettingC¢M¢Chat room¢Setup¢Select function.AccountThe list of available accesses is displayed.I / CSelect an access to estab-lish a connection.Or<New entry>/Account sett. =Set up an access or change the settings as specified by the service provider. Depending on the service provider, the settings may not be changeable.Leave group Exit group.Details Information about the group:Group ID:, Name:, Topic:, Owner: Clear all Delete all texts in the cur-rent Inst. Message.Name: Name of the access.URL: Enter URL, e.g. http://www.abc.comUser ID: Enter a non-ambiguous user (login) name.Password: Enter password (shown as a series of asterisks).
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Instantmsg.fm75Chat roomVAR Language: am; VAR issue date: 040819left page (75) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)My settingsInformation on your current per-sonal status:§Options§ For each setting, specify who is allowed to view your personal informa-tion:PublicAll contacts.PrivateContacts designated as Friend: (p. 70).HideNobody.App. settingsSettings for the application used:Alias: Your own alias by which you can be found on the server.AIM screen name: Name to be displayed in the group.Mood: Information about your own mood, e.g.Happy, Sad, Tired, etc.Status text: Random text information, e.g. “Am at home”.Availability: Availability:Available, Not available, Discreet Cellphone: Enter the phone number with internal extension code.Automatic login: Auto-reconnect to the last access to be used.Timeout: Time without action after which the application is terminated. However, the server remains con-nected.Message info:/Online info: Signal the receipt of mes-sages: Yes/No Signal given as:•Sound •Silent alert •Pop-upPopup windows authorised: Yes/No
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Mailbox.fmVoice message/mailbox76VAR Language: am; VAR issue date: 040819left page (76) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Voice message/mailboxC¢M¢Setup¢Voice messageMost service providers provide a mailbox in which a caller can leave a voice mail for you if• if your phone is switched off or not ready to receive,• if you do not want to answer,• if you are making a phone call (and if Call waiting (p. 92) is not activated).If the voice mail service is not part of your service provider's standard package, you will need to register for it, and possibly make the settings manually. The following sequence may vary from service provider to service provider.Setup bThe service provider supplies you with two phone numbers:Save mailbox numberYou call this phone number to listen to the voice mails left for you. C¢M¢Setup¢Voice messageÏ/JSelect number from Phonebook/Addressbook or enter/change it. §OK§ Confirm.Save call divert numberCalls are diverted to this phone number. C¢T¢Phone setup¢Divert ¢e. g. Unanswered¢SetJEnter phone number.§OK§ Registration with the net-work is confirmed a few seconds later.Listening to message bA new voice message can be announced as follows, depending on the service provider:ÀIcon plus beep.OrçNotification via SMS.OrYou receive a call with an automatic announcement.Call your mailbox and play the mes-sage(s) back.1Press and hold (if neces-sary enter mailbox number once only). Con-firm with §OK§ and §Mailbox§ depending on your serv-ice provider.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_CB.fm77CB servicesVAR Language: am; VAR issue date: 040819left page (77) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)CB servicesC¢M¢Setup¢CB servicesSome service providers offer infor-mation services (info channels, Cell Broadcast). If reception is activated, your Topic list will supply you with messages on the activated topics. CB messages are displayed in standby mode, longer messages are scrolled automatically.Receive CBYou can activate and deactivate the CB service. If the CB service is acti-vated, standby time for the phone will be reduced.Topic listYou can add any topics to this per-sonal list from the topic index. You can preset 10 entries with their channel numbers (ID) and, if applica-ble, with their names. New topic Select.• If no topic index is available, enter a topic with its channel number and confirm with §OK§. • If the topic index has already been transmitted, select a topic and activate it with §Options§.Topic Select§Options§ Open list menu.If a topic is selected in the list you can view it, activate/ deactivate it, edit it or delete it.CB languagesReceive Cell Broadcast messages in only one specific language or in all languages.DisplaysÖ,ÕTopic activated/deactivated.pNew messages received on the topic.qMessages already read.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Internet.fmSurf & fun78VAR Language: am; VAR issue date: 040819left page (78) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Surf & funGet the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can download games and applications to your phone. Internet access may require registration with the service pro-vider.Access to the service providerDirect call-up of the browser with the URL from your service provider.Internet C¢O¢InternetThe browser is activated with the pre-set option as soon as you call up the function (Browser settings, S. 79; may be specified/pre-assigned by service provider). Browser menu§Options§ Open menu.Homepage Call up the pre-set homepage for the current profile.Bookmarks •List bookmarks Dis-play list of bookmarks stored in the phone. •Bookmark site The current page is saved as a bookmark.Go to... Enter URL for direct dial to an Internet address, e.g. wap.siemens-mobile.com Reload Reload current page.Show URL Display the URL of the page currently loaded for sending via SMS/MME/e-mail.History Display last Internet sites to be visited.Disconnect Disconnect the Internet.File Save object on the current page or save the com-plete page; display saved pages.Settings Set or reset browser (p. 79).Exit browser Close the browser.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Internet.fm79Surf & funVAR Language: am; VAR issue date: 040819left page (79) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)End connectionB Press and hold to clear down the connection and close the browser.Navigation in the browserDisplay symbols in the browser (selection)Enter special characters*,0Select important special characters. Browser settingsC¢O¢Internet§Options§ Open menu.Settings Select.ProfilesPreparation of the phone for Internet access depends on the service pro-vider concerned:Profile pre-setIn most cases, access profiles have already been created for one or more service provider(s).C • Select a link.• Settings, status on/off.B •Press briefly: back a page.I • One input field/link forward/back.• Scroll one line.² Connect ´ No network±Network ³ GPRS onlineYour Internet browser is licensed by: Browser Set start option as well as handling of pictures and sounds plus send options.Profiles The list of profiles is dis-played for activation/setting. For more information, con-tact your service provider.Protocol parameters Set protocol parameters, push messages and abort time as well as handling of cookies.Security Set encryption.Context Reset session; delete cache, history and cookies.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Internet.fmSurf & fun80VAR Language: am; VAR issue date: 040819left page (80) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)ISelect profile.CActivate profile.Set profile manuallyYou will receive the necessary data from the service provider or via the "Setting Configurator" (p. 133) at: www.siemens-mobile.com/mobilescustomercare§Options§ Open menu.BookmarksC¢O¢BookmarksDisplay URL/call up pageList bookmarks Display list of bookmarks stored in the phone.ISelect bookmark.CCall up URL.SaveBookmark site The current page is saved in the phone as a bookmark.Bookmark options§Options§ Open menu.Here you will find functions for changing and managing bookmarks and their folders. This includes edit-ing individual entries with the corre-sponding URLs as well as deleting and moving them to other folders.EmotyIf your phone is equipped with an Emoty CLIPit cover, you can transmit emotions. Various figures are animated with the integrated pressure, touch, and vibration sensors. The animations can be sent as MMS. You will find extensive information in the Emoty userguide.Edit Start processing. For the Internet-specific settings below, please contact your service provider.Delete Delete selected profile.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Games&Apps.fm81Surf & funVAR Language: am; VAR issue date: 040819left page (81) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Surf & fun Games and ApplicationsGames and applications are offered on the Internet. Once downloaded, these are available to you via the telephone. Most applications include instructions. Some applications and games are already pre-installed on your telephone. You will find these listed here: www.siemens-mobile.com/cx70RequirementsWAP profile (p. 79) and the access (p. 98) must be configured.DownloadSelect the correct access depending on whether you are loading games or applications:C¢O¢Games orC¢O¢ApplicationsIn addition to URLs and service pro-viders for the download, any availa-ble applications/games and folders will be displayed.Download newISelect a service provider or URL.CStart WAP browser and visit URL.Only description fileÌThe description file is loaded for information purposes only. The appli-cation/game itself must be loaded separately. or complete downloadËThe application/game is completely loaded.ApplyRemember that applications/games may be protected (DRM, p. 21).ÍThe executable applica-tion is saved on the tele-phone and can be started immediately .Download wiz.C¢O¢Download wiz.You will not be left on your own dur-ing the download!
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Games&Apps.fmSurf & fun82VAR Language: am; VAR issue date: 040819left page (82) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)OptionsProcessing and administering your applications and folders:Move Move applications between folders. New folder Create and name new folder.Reinstall Reinstall an application (update).Security Select a safety level.Reinstall Repeat after transmission error.Attributes Show details of the applica-tion/folder (name, version, size, path, producer, date).HTTP profile Display profile list for activation/setting (For standard functions see p. 23)Additional informationYou can use WAP to download applications (e.g. ringtones, games, images, animations) from the Internet. Downloading or running applications will not affect or change the software already installed on your Java™-enabled mobile phone.Siemens excludes all warranty and liability claims in respect of or in connection with any applica-tions subsequently installed by the customer and any software not included in the original delivery package. This also applies to functions enabled subsequently at the customer's instigation. The purchaser bears sole risk for the loss of, damage to, and any defects arising in, this device or the applications and for any direct damage or conse-quential damage of whatever nature resulting from the use of this application.For technical reasons, such applications and sub-sequent enabling of certain functions are lost in the event of the device being replaced/re-sup-plied and may be lost if it is repaired. In such cases, the buyer is required to download or release the application again. Please ensure that your phone has Digital Rights Management (DRM) so that individual applications downloaded via WAP are protected from unauthorised repro-duction. These applications are then exclusively intended for your phone and cannot be trans-ferred from this even to create a backup. Siemens does not warranty, guarantee or accept any liability for the customer's ability to download or enable applications again or to do so free of charge. If technically possible, back up your applications to a Windows® PC using the "Mobile Phone Manager", p. 131, www.siemens-mobile.com
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Profiles.fm83SetupVAR Language: am; VAR issue date: 040819left page (83) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)SetupProfilesC¢T¢ProfilesSeveral settings can be stored in a phone profile in order, for example, to adapt the phone to the surround-ing level of noise.• Five standard profiles are provided with default settings. They can be changed however: Normal environment Quiet environment Noisy environment Car Kit Headset • You can set two personal profiles (<Name>).• The special profile Airplane mode is fixed and cannot be changed.Switching on a profileISelect default profile or personal profile.CSwitch on profile.Profile settingsEdit a default profile or create a new personal profile:ISelect profile.§Options§ Open menu.Change sett.Select.The list of available functions is dis-played.When you have finished setting a function, you return to the profile menu where you can change a further setting.Additional information• Calling up the list in standby mode:GProfile list is displayed.• The active profile is marked with ·.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Profiles.fmSetup84VAR Language: am; VAR issue date: 040819left page (84) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Profile-Optionen§Options§ Open menu.Car Kit If an original Siemens Car Kit is used, the profile is switched on automati-cally as soon as the phone is inserted into the cradle (see also accessories, p. 151). HeadsetThe profile is only switched on auto-matically if an original Siemens headset is used (see also accessories, p. 151).Airplane modeAll alarms (appointments, alarm clock) are deactivated. This profile cannot be modified. Switch onHScroll to Airplane mode.CConfirm selection.CConfirm safety inquiry again in order to activate the profile. The phone switches itself off auto-matically.Normal modeWhen you switch on your phone again, the previously set profile will be reactivated automatically.Activate Activate selected profile.Change sett. Change profile settings.Copy from Copy settings from another profile.Rename Change personal profile (except default profiles).
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Themes.fm85SetupVAR Language: am; VAR issue date: 040819left page (85) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup TopicsC¢T¢TopicsLoad a completely new user inter-face in your telephone. With the press of a key, various functions are re-organised based on a topic, e.g. • switch on/off animation, • background image, • screensaver, •switch on/off melody, • additional animations.Topic files are compressed to save memory space. After a download (p. 81) or a call from My stuff, these are automatically unzipped when activated. Activate new topicISelect topic.CDisplay topic preview.CActivate new topic.Additional informationIt is possible that the existing settings could be overwritten.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_DynamicLight.fmSetup86VAR Language: am; VAR issue date: 040819left page (86) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup Dynamic lightC¢T¢Dynamic light¢Select function.The LEDs beneath the top of the phone are used to optically signal various functions. Show effectsSwitch on function.SelectYou can set the optical signals for the following functions:Standby Net search d Calls Group calls Other calls During a call Incoming msgs Appointments CarKit conn. Low battery During on/off Soundplayer §Change§ Display the possible rhythms.ISelect them from several flash rhythms.CAllocate selection.Play demoAll flash rhythms are displayed in sequence. §Cancel§ Terminate.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Display.fm87SetupVAR Language: am; VAR issue date: 040819left page (87) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup DisplayC¢T¢Display¢Select function.LanguageSet the language of the display text. When "automatic" is set, the lan-guage of your home service provider is used. If a language that you do not under-stand happens to be set, the phone can be reset to the language of your home service provider with the fol-lowing input (in standby mode):* # 0 0 0 0 # AText inputT9 preferredActivate/deactivate intelligent text entry.Input languageSelect language for text entry. Lan-guages with T9 support are marked with the T9 symbol.WallpaperSet wallpaper graphic for display.LogoChoose graphic to be displayed instead of the provider logo.Color schemeSelect colour scheme, incl. back-ground image for the entire user interface ScreensaverThe screensaver shows a picture in the display when a period set by you has elapsed. An incoming call and pressing any key will end the func-tion except if the safety function is activated. PreviewDisplay the screensaver.StyleSelect Analog clock, Digital clock, Bitmap, Energy saving BitmapSelect image in the My stuff.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Display.fmSetup88VAR Language: am; VAR issue date: 040819left page (88) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)TimeoutSet period after which the screen-saver starts.SecurityTo terminate the screensaver, the telephone code is requested.Auto key lockAutomatic keypad locking if no key has been pressed for one minute in standby mode.Unlocking:#Press and hold.Start up anim.Select animation to be shown when phone is switched on.Shutdn anim.Select animation to be shown when phone is switched off.GreetingEnter greeting to be displayed instead of animation when phone is switched on.Large lettersYou can choose between two font sizes for the display.IlluminationSet display light brighter/darker. The darker the setting the longer the standby time.IPress the joystick repeat-edly at the top/bottom to adjust up or down.NoteThe screensaver Digital clock reduces the phones standby time.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Ringtones.fm89SetupVAR Language: am; VAR issue date: 040819left page (89) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:05)Setup Ring tonesC¢T¢Ring tones¢Select function.Set the tones on the telephone to suit your requirements.Ringer settingOn/off Activate/deactivate all tones. Beep Reduce ringtone to a short signal (beep).Silent alertTo avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alterna-tive. The silent alert can also be acti-vated in addition to the ringtone (e.g. in noisy environments). This function is deactivated when the battery is being loaded and accesso-ries are connected (except the head-set).ISelect one of several dif-ferent silent alerts.VolumeSet different volumes for types of call/functions.ISelectIncoming call Walky TalkyMessages CB services Alarm clock Organizer System CThe ringtone is sounded again.ISet volume.CConfirm setting.Additional informationPlease make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Ringtones.fmSetup90VAR Language: am; VAR issue date: 040819left page (90) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:05)Allocating a ringtoneA ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection.d CallsAllocate a single ringtone to all phone numbers in the Addressbook.Group callsAllocate a different ringtone to each group.Other callsAllocate one ringtone to the remain-ing callers.Walky TalkyAssign one ringtone to a Walky talky connection.More melodiesAllocate further ringtones for:Messages Alarm clock Organizer Startup melody Shutdown mel. or record new ones with:Sound recorder (p. 121)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Avatar.fm91SetupVAR language: am; VAR issue date: 040819left page (91) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup Phone PilotC¢T¢Phone Pilot¢Select function. Your Phone Pilot accompanies you with instructions for many actions you can perform with your phone. It reminds you of important deadlines or birthdays.A Phone Pilot is in the phone by default and cannot be deleted.Activate/deactivateOff You can deactivate Phone Pilot function.Default Select the included "standard figure".If you have additional figures down-loaded, you can also install, activate, or delete them:ISelect entry.CActivate.InstallYou can download additional figures on the Internet.ISelect entry in the list or Inbox.JWhen installing a new Phone Pilot you can give it its own name.§Yes§ Activate.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_CallSetup.fmSetup92VAR Language: am; VAR issue date: 040819left page (92) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup Call setupC¢T¢Call setup¢Select function.Hide ID bWhen you make a call, your phone number can be displayed on the recipient's display (depending on the service providers).To suppress this display, you can enable the "Hide ID" mode for all sub-sequent calls or just for the next call. You may need to register separately with your service provider for these functions.Call waiting bIf you are registered for this service, you can check whether it is set and you can activate/deactivate it.DivertYou can specify the conditions under which calls should be diverted to your mailbox or other numbers.Status checkYou can check the current divert sta-tus for all conditions. After a short pause, the current situation is trans-mitted by the network and dis-played.ÖCondition set.ÕNot set.ÔDisplay if status is unknown (e.g. with a new SIM card). Clear all bAll set diversions are cleared.Set up call divert (example)The most common condition for call divert is, for example:Unanswered bI Select Unanswered. (Includes the conditions Not reachable, No reply, Busy, see below)CConfirm.Set Select.CConfirm.Ï/JSelect or enter the phone number to which the calls are to be diverted.§Mailbox§ Use existing mail-box phonenumbers, or enter them if necessary.CConfirm. After a short pause, the setting is con-firmed by the network.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_CallSetup.fm93SetupVAR Language: am; VAR issue date: 040819left page (93) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)All calls bAll calls are diverted.ÇIcon in the top line of the display in standby mode.Not reachableDivert occurs if phone is switched off or is out of range.No replyA call is only diverted after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5 second intervals.BusyDivert occurs if a call is in progress. If Call waiting is activated (p. 32), you will hear the call waiting tone during a call.Receiving fax bFax calls are diverted to a number with a fax connection.Receiving data bData calls are diverted to a phone number with a PC connection. Call screening bOnly calls from phone numbers that are in the Phonebook/Addressbook or in a group are signalled. Other calls are only displayed.Any keyIncoming calls can be accepted by pressing any key (except for B).Minute beepDuring the call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient does not hear this beep.Additional informationNote that the divert is stored in the network and not in the phone (e.g., when the SIM card is changed).Reactivate divertThe last divert has been stored. Proceed as with "Set divert". The stored phone number is displayed. Confirm number.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_PhoneSetup.fmSetup94VAR Language: am; VAR issue date: 040819left page (94) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup Phone setupC¢T¢Phone setup¢Select function.Key tonesSet the type of acoustic key acknowledgement.Info tonesSet service and alarm tones:On/off Activate/deactivate tones.Extended If switched on, a wider range of service tones is available, e.g.: end of menu reached, network connection interrupted.Automatic switch offThe phone switches off each day at the set time.Activate§Time§ Press.JEnter time (24-hour clock).CConfirm.Deactivate§Manual§ Press.CConfirm.Phone identityThe phone identity number (IMEI) is displayed. This information may be useful for customer service. §More§ Press several times to display additional information about the device.Device checkAfter the last information page, a self-test as well as individual test are offered. If you select Self test, all indi-vidual test are carried out.Memory assis.The memory assistant will help you if there is insufficient phone memory. If necessary, it is automatically started by applications.After the capacity has been checked, all files and folders are displayed with their size and you can view, open or delete them as necessary.Software versionDisplay the software version for your phone in standby mode:* # 0 6 #, then press §More§.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_PhoneSetup.fm95SetupVAR Language: am; VAR issue date: 040819left page (95) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)File systemFormat(Phone-code protected)The telephone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted.Clean upCreating more memory by deleting temporary, non-requird files.Fact. settingsReset phone to default values (fac-tory setting). This does not affect the SIM card or the network settings.Alternatively enter in standby mode:* # 9 9 9 9 # A
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Clock.fmSetup96VAR Language: am; VAR issue date: 040819left page (96) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup ClockC¢T¢Clock¢Select function.Time/dateThe clock must be set correctly once at start-up.§Change§ Press.JFirst enter the date (day/month/year), then the time (hours/minutes/seconds).Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired time zone.City listISelect a city in the selected time zone.§Options§ Open menu.Date formatSelect the display format for the date.Time formatSelect 24h or 12h.Buddhist dateSwitch to the Buddhist year (not on all phone models). Show clockActivate/deactivate time display in standby mode.Auto time zone bThe time is set automatically.Additional informationIf the battery is removed for longer than 30 seconds, the clock must be reset. Set time zone Set time zone.Auto time zone= Have the time zone auto-matically set by the net-work.Search city Search for a city.Help Operating instructions.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Connectivity.fm97SetupVAR Language: am; VAR issue date: 040819left page (97) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup ConnectivityC¢T¢Connectivity¢Select function.GPRS b(General Packet Radio Service)CSwitch GPRS on/offGPRS is a new method for transmit-ting data faster in the mobile net-work. Use GPRS and if the network has sufficient capacity, you can be connected to the Internet perma-nently. Only the actual transmission time is charged by the network oper-ator. Some service providers do not yet support this service. Shown in the display:£ Activated and available.¢ Registered.¤ Temporarily interrupted.GPRS infoDisplay of information on connec-tion status.IrDAYour phone has an infrared inter-face. With this interface, you can exchange data such as pictures, ring-tones, Addressbook entries, busi-ness cards or organiser data with other appliances which also have an infrared interface. The infrared interface is on the right side of the phone. The distance between the two devices must not exceed 30 cm. The infrared windows in both appliances must be aligned as accurately as possible with each other.Shown on the display:¯IrDA activated.®During transmission.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Connectivity.fmSetup98VAR Language: am; VAR issue date: 040819left page (98) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Data servicesBasic setting and activation of the connection profiles for data trans-mission such as MMS, WAP. The phone default setting varies from service provider to service pro-vider.• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be configured manually. In this case, you will receive the necessary data from the service provider or via the "Setting Configurator" at (p. 133): www.siemens-mobile.com/mobilescustomercareSelect profileISelect the profile.CConfirm selection.Set profileISelect the profile.§Options§ Open menu.§Edit§ Open the selection.ISelect CSD settings, and/or GPRS settings.§Edit§ Select service and enter data (see below). §Save§ Save settings.CSD (Circuit Switched Data)GPRS (General Packet Radio Service)You can only start to use GPRS once you have activated GPRS on your phone(p. 97).Dial-up number: Enter ISP number.Call type: Select ISDN or analogue.Login: Enter login name.Password: Enter password (shown as a series of asterisks).DNS1 / DNS 2: (optional).APN: Enter service provider address. Login: Enter login name.Password: Enter password (shown as a series of asterisks).DNS 1 (opt.): DNS 2 (opt.): (optional).
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Connectivity.fm99SetupVAR Language: am; VAR issue date: 040819left page (99) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)HTTP profileThe phone default setting varies from service provider to service pro-vider.• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be con-figured manually.If necessary, check with your service provider for details. You will find the current settings for the service pro-vider in the Internat at this address: www.siemens-mobile.com/mobilescustomercare (p. 133).IMake the settings.AuthenticationActivate or deactivate encrypted WAP dial-up (CSD connections only).Fax/dataFax/data mode using a PCWith the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone. Fax and data services must be ena-bled by the service provider. There are variations in fax and data recep-tion, depending on the network. Please ask your service provider about this.Send voice/fax bSet this function on the phone before transmission so that you can switch from voice mode to fax mode.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Connectivity.fmSetup100VAR Language: am; VAR issue date: 040819left page (100) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Rec voice/fax b(Only if no special fax or data number is available). Start the required communication program on your PC and select the function on the phone during the call (the PC will take over the connec-tion).End transmissionEnd transmission with PC-software and/or press B.Rec fax/data bYour service provider has given you a number for telephoning and a fax/data number.The call is signalled by a special ring-ing tone and the type of call (fax or data) is displayed. Now start the communication program in your PC to receive the fax/data.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Security.fm101SetupVAR Language: am; VAR issue date: 040819left page (101) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup SecurityC¢T¢Security¢Select function.Auto key lockIf activated, the keypad is locked automatically if no key has been pressed for one minute in standby mode. This prevents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.Direct call(Phone-code protected)Only one phone number can be dialled(see also p. 35). Only ‚b(PIN 2 or phone code protected)Dialling options are restricted to SIM-protected phone numbers in the Phonebook. If only area codes are entered, relevant phone numbers can be added to these manually before dialling.If the SIM card does not support PIN 2 input, the whole Phonebook can be protected with the phone code.This SIM only b(Phone-code protected)The phone can be connected to a SIM card when the phone code is entered. Unless the phone code is known the phone will not operate with a different SIM card.If the phone is to be used with a dif-ferent SIM card, enter the phone code when requested.CodesDescription, see p. 25:PIN control, Change PIN, Change PIN2, Chg.phonecodeAdditional informationThe keypad can also be directly locked and unlocked in idle state.In each case:# Press and hold.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Security.fmSetup102VAR Language: am; VAR issue date: 040819left page (102) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Barring bBarring restricts the use of your SIM card (not supported by all service providers). You need a 4-digit net-work password for network barring. Your service provider will give you this password. You may need to be registered separately for each barring.All outgoingAll outgoing calls except emergency numbers are barred.Outgoing intl.(International outgoing)Only national calls can be made.Out.int.x home(International outgoing without home country)International calls are not permitted. However you can make calls to your home country when abroad.All incomingThe phone is barred for all incoming calls (forwarding of all calls to mail-box provides a similar effect).When roamingYou do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.Status checkThe following information can be displayed after a status check:ÖBarring set.ÕBarring not set.ÔStatus unknown (e.g.new SIM card).Clear allAll barrings are deleted. A password which the service provider will give you is necessary for this function.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Network.fm103SetupVAR Language: am; VAR issue date: 040819left page (103) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup NetworkC¢T¢Network¢Select function.Line bThis function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone.Select lineSelect the currently used phone number.\Display current phone number.Protected(Phone-code protected)You may limit usage to one phone number.Network infoThe list of GSM networks currently available is displayed.ÆIndicates non-authorised service providers (depending on SIM card).Choose netwrkNetwork search is restarted. This is useful if you are not on your home network or want to register on a dif-ferent network. The network list is rebuilt when Auto network is set.Auto network Activate/deactivate, see also "Choose netwrk" above. If "Automatic net-work" is activated, the next network on the list is dialled in ranking order of your "preferred networks". Other-wise a different network can be selected manually from the list of the available GSM networks.Preferred net Enter your preferred service provid-ers here for when you leave your home network (e.g. if there are dif-ferences in price).Your service provider is displayed:§List§ Display list of preferred networks.Additional informationSpecial settings may be made for each phone number (e.g., melody, call divert etc.) To do this, first switch to the required phone number. Switch from phone number/connection in standby mode:0Press. §Line 1§ Press.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Network.fmSetup104VAR Language: am; VAR issue date: 040819left page (104) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Create/change entry: <Empty> or select an existing entry, then select a new service provider in the list and confirm.Record new service provider (last entry in the list):Furth.networkSelect, enter the provider data and save it.Band selection bSelect either GSM 900, GSM 1800 or GSM 1900. Make sure that your ser-vice provider supports the selected band.Fast searchWhen this function is active, net-work reconnection is speeded up (standby time is reduced).User group bDepending on service provider, you can create groups with this service. These can have access to internal (company) information, for exam-ple, or special tariffs apply. The details can be clarified with your service provider.ActiveActivate/deactivate function. "User group" must be deactivated for nor-mal phone use.Select groupYou can select or add groups other than preferred groups (see below). Code numbers for the groups are obtained from your service provider.All outgoingIn addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls withinthe group are permitted.Pref. groupIf activated, calls may only be made within this standard user group (depending on the network configu-ration).Additional informationIf you are outside your home network, your phone automatically dials another GSM network.If the signal strength of the preferred net-work is inadequate when you switch on the phone, the phone may register in a different network. This can change when the tele-phone is next switched on or if another net-work is selected manually.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SetupAccessory.fm105SetupVAR Language: am; VAR issue date: 040819left page (105) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:32)Setup AccessoriesC¢T¢Accessories¢Select function.Car KitOnly in combination with an original Siemens handsfree Car kit (see accessories). The car kit profile is activated automatically as soon as the phone is inserted into the cradle.Auto answer (factory default: off)Calls are accepted automatically after a few seconds. Eavesdropping is possible!ÅShown on the display.Automatic switch off(factory default: 2 hours)The phone is powered by the car's power supply. You can adjust the time between switching off the igni-tion and the automatic switching off of the phone.Car loudspk.Improves playback in certain circum-stances.Automatic settings• Permanent illumination: switched on.• Key lock: switched off. • Charging the phone battery.• Auto. activation of the Car Kit profile when phone is inserted in cradle.HeadsetOnly in conjunction with an original Siemens headset (see accessories). If an original Siemens Headset is used the profile is automatically activated when the headset is plugged in. Auto answer (factory default: off)Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset. Automatic settingAccept call with Call key or PoC key (push-and-talk over cellular "PoC" mode), even when the auto key lock is activated.Auto answerIf you do not notice that you phone has accepted a call, there is the danger that the caller may eavesdrop.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MyMenu.fmMy menu106VAR Language: am; VAR issue date: 040819left page (106) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)My menuCPress.§My menu§ Press.Create your own menu with fre-quently used functions, phone num-bers or WAP pages. The list of 10 entries is preset. You can, however, change it as you want.UseISelect the required entry.CConfirm.OrAIf the entry selected is a phone number, you can also call it with the Call key.Change menuYou can replace each entry (1–10) with another entry from the selec-tion list.ISelect the required entry.§Change§ The function list is opened for selection.I Select the new entry from the list.CConfirm. The entry is saved.If Phonebook is selected, the phone number must also be selected; if Inter-net is selected, the book-mark must also be selected.Reset all(Telephone code required)§Reset all§ Select. After a safety query, the pre-assign-ment is reset.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_FastDial.fm107Fast access keyVAR Language: am; VAR issue date: 040819left page (107) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Fast access keyYou can assign one important phone number of a function to each one of the two soft keys and number keys 2 to 9 (speed-dial numbers). The phone number can then be dialled or the function can be started at the touch of a button. .Soft keysChangeFor example, the Internet function is assigned to the soft key. To change this (in standby mode):§Internet§ Press briefly.§Change§ Scroll to new assignment in the list.CConfirm.• Special case Phone number. Pick out a name from the Phone-book/Addressbook for assignment to the key.• Special case Bookmark. Scroll to a URL in the bookmark list for assignment to the key.ApplyIn standby mode:ApplicationThe "Internet" is just used as an example here.§Internet§ Press and hold, the appli-cation is started.Phone number:The setting "Carola" is used here only as an example.§Carola§ Press and hold, the phone number is dialled.Additional informationThe service provider may have already assigned functions to a soft key (e.g access to "SIM services" or direct call-up of the Internet portal). It may not be possible to modify this key assignment.The left soft key may sometimes be replaced automatically by p/À to access a new message for example.Z£XService Provider01.10.2004 10:10Internet ìHelp
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_FastDial.fmFast access key108VAR Language: am; VAR issue date: 040819left page (108) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Speed keysNumber keys 2 to 9 can be used as speed dialling numbers for fast access. Number key 1 is reserved for the mailbox phone number (p. 76) and number key 0 is reserved for switching over two connections dur-ing use (p. 103).ChangeIn standby mode:3number key briefly press (e.g. 3). This number is still free:§Set§ Press.Select a new function from the list and confirm with §OK§.Or An assignment has already been made to this key (assignment dis-played above the right soft key):C Press briefly.§Change§ Scroll to application in the list.CConfirm.• Special case Phone number. Pick out a name from the Phone-book/Addressbook for assignment to the key.• Special case Bookmark. Scroll to a URL in the bookmark list for assignment to the key.ApplySelect a stored phone number or start a stored application (e. g. Internet).In standby mode:3 Press briefly.The assignment of the number key 3 is displayed above the right soft key e.g.:§Internet§ Press down.Or simply3Press and hold.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Organizer.fm109OrganizerVAR Language: am; VAR issue date: 040819left page (109) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)OrganizerCalendarC¢Q¢CalendarYou can enter appointments in the calendar. Time and date must be set for the Calendar to work correctly.The calendar offers you three views:Monthly viewSpecial colour coding:Day with entries for appointments, day-long appointments, weekendNavigation:FOne day forward/back.IOne week forward/back.CDaily view open.Weekly viewSpecial displays:Appointments are shown as a verti-cale colour bar on the horizontal hour division.Navigation:FOne day forward/back.IForward/backward by the hour through the day.Daily viewSpecial displays:Description of appointment. Navigation:FOne day forward/back.ITo the start/end of the day or next/last entry.Calend. setupC¢Q¢Calend. setupStart of day:Hour when the working day begins.Start of week:Weekday on which the monthly and weekly view on the left startsWeekendSet the days for the weekend.Show birthdays:Yes/No
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Organizer.fmOrganizer110VAR Language: am; VAR issue date: 040819left page (110) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)AppointmentsC¢Q¢AppointmentsAppointments are displayed in chronological order in a list.Enter new appointment<New entry>Select.Types:cMemo Text input for descriptiondVoice memo Enter voice memo. Shown with alarm.eCall Enter phone number to be displayed with the alarm.fMeeting Text input for descriptiongVacation Enter start and end date.hBirthday Enter name and date.Different input/selection fields are displayed depending on the type. The number of fields can be restricted, see Default at the end of the list. Description:Description of appointment.Phone number:Enter a phone number or select one from the Addressbook.Voice memo:Enter a voice recording, see Dictation mac, p. 113.Location:Location of appointment.Whole day:All-day appointment: Yes/NoStart date:Date when appointment starts.Start time:Time when appointment starts.End date:Date when appointment ends.End time:Time when appointment ends.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Organizer.fm111OrganizerVAR Language: am; VAR issue date: 040819left page (111) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Alarm time:On/off or Silent alert.JEnter the timespan before the appointment and select the time unit:Minutes, Hours, Days.Recurrence:Select a timeframe for repeating the appointment:No, Daily, Weekly, Monthly, Yearly.Enter a parameter for repeating:Forever, Until, Events (number)If Weekly is selected, certain week-days can be highlighted. DefaultIn the list, select those fields which are to be offered for future entries.Information on the alarmWhen the set date and time are reached there is an audio and a vis-ual alarm. If an alarm is missed it appears in the list of missed appoint-ments (p. 112).Alarm type Meeting: The text is shown in the display.Alarm type Call: The phone number is displayed and can be dialled immediately.Alarm type Birthday: You can send special birthday greetings by SMS, MMS, e-mail or a call via §Options§. With Pause you can set a repetition of the alarm.TasksC¢Q¢TasksA task is displayed like an appoint-ment in the agenda of the selected day. However, unlike an appoint-ment it does not require a time. When no time is entered the task appears at the top of the list every day until it is marked as completed.The entries are made in the same way as Appointments, see this sec-tion. Then:Additional informationDisplay above set alarms:¹Alarm clock.»Appointment.An alarm sounds even when the phone is switched off (except in Airplane mode, p. 84). The phone does not go to standby mode. To deactivate it press any key.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Organizer.fmOrganizer112VAR Language: am; VAR issue date: 040819left page (112) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Status:Choose between: Done or Outstanding Priority:Selection in 5 levels of Lowest bis Highest. Use dateIf activated with Yes, the following time-input option is offered.Due date:/Expiry time:Enter the date and time by when the task is to be completed.Alarm: and Default as for Appointments.NotesC¢Q¢NotesWrite and manage brief text notes. Protect confidential information using a phone code.Enter a new memo<New entry>Write a normal note.<Confidential>Write a confidential note. The phone code is required.JEnter text. The first line is displayed later as a "title" in the notes list. §Options§ Open menu.Save Save note. Missed appts.C¢Q¢Missed appts.Events with an alarm (Appointments, Tasks) to which you have not reacted are listed for reading.Organiser optionsDepending on the application used (Calendar, Appointments, Tasks, Notes) and the current situation, different functions are offered.§Options§ Open menu.Delete by Delete all entries prior to a certain date.Delete done Delete all completed tasks.Activate/Deactivate Switch alarm on/off.Confiden-tial Protect note with phone code. We recommend that you do not store any pass-words (PIN, TAN etc.) as notes.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Organizer.fm113OrganizerVAR Language: am; VAR issue date: 040819left page (113) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Dictation macC¢Q¢Dictation macUse the dictating machine to record short voice memos. • Use your phone as a dictating machine when on the move.• Record a memo as a reminder or as a note for others.• Add a voice memo to an appoint-ment in the Calendar.• Record a call.New recording<New entry>Select.The remaining time avail-able as well as the record-ing time are shown in the display.CA brief tone sounds when the recording starts. Now say the text.CPause/recording alter-nately.DEnd recording.The recording is automat-ically saved with a time stamp. Rename with §Options§.PlaybackISelect the desired record-ing.CPlayback/pause, alter-nately.D/EPress and hold rapid rewind and fast forward.Dictating machine options§Options§ Open menu.Warning!The use of this feature may be subject to restrictions under criminal law. Please inform the other party to the conversation in advance if you want to record the conversation and please keep such recordings confidential. You may only use this feature if the other party to the conversation agrees.Loudspeaker Playback via the built-in loudspeaker.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Organizer.fmOrganizer114VAR Language: am; VAR issue date: 040819left page (114) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Time zonesC¢Q¢Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired record-ing.City listISelect a city in the selected time zone.Time zone options§Options§ Open menu.Set Specify the time zone.Auto time zone= The time zone is switched automatically to local time by the network.Search city Search for a city.Help Operating instructions.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm115ExtrasVAR Language: am; VAR issue date: 040819left page (115) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)ExtrasWalky Talky bThis application can be used to simultaneously connect multiple subscribers. Like a normal Walky Talky, only one subscriber can speak at a time. The others can only listen until the speaker allows others to talk.A recipient is selected using their Walky Talky address (WT ID) or their phone number. Groups created in advance (p. 118) can be invited to a session. Your service provider will supply you with your own WT address.The recipient can also use a mobile phone, as well as a PC with an Internet connection and headset (depending on service provider). To use the application, GPRS (p. 97) must be switched on and Walky Talky (p. 119) activated. Preparing a sessionC¢S¢Walky Talky<New session>Select. The possible functions as well as already added subscribers are displayed.You have several options to combine the subscribers:<Add from d>ISearch and mark recipient in Addressbook.CAdd recipient.Or <Add f. sess.>ISelect a subscriber from an earlier session. Or <Enter WT ID>JEnter WT ID of a recipient.§Selection Add entries.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fmExtras116VAR Language: am; VAR issue date: 040819left page (116) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Or <Add from grp>ISelect group.COpenISelect and mark recipient.§Selection Add recipient.Starting a sessionIf all the desired subscribers are combined, start the session:§WalkyT.§ The subscribers are displayed, and the authorised speaker is shown in bold.Speaking rights The list of subscribers is displayed. The current authorised speaker is shown in bold.§WalkyT.§ Request speaking rights. The delegation of speaking rights is displayed and then the requester can talk.§WalkyT.§ Returning speaking rights.Inviting additional subscribers You can invite additional subscribers during a session. §Options§ Open menu, select Invite and mark new subscribers.You are being invitedThe invitation is shown in a window. You can accept or refuse this invitation.CAccept the invitation.The list of subscribers is displayed.Leaving the session and endingOnly if you yourself started the session.§Options§ Open menu.End sessionSelect. You will leave and end the current session.Additional informationDepending on the setting for Hold mode (p. 120) §WalkyT.§ must be pressed and held as long as one speaks.If the person with speaking rights takes a long pause, the speaking rights are automatically released again.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm117ExtrasVAR Language: am; VAR issue date: 040819left page (117) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Letting the session run in the backgroundThe current session remains active in the background. A phone call ends the session.Putting Walky Talky in the backgroundBPress and hold. Using Walky Talky againC¢S¢Walky TalkySessions Continue session again.Walky Talky options§Options§ Open menu.Different functions are offered depending on the situation.SessionsC¢S¢Walky Talky¢SessionsDisplay subscriber list for the current session. The authorised speaker is shown in bold.History view Display of subscribers in order of speaking.Session view Display of subscribers for the current session.End session End session.Session details Start time, Status, Duration, Type etc.User details Display subscriber properties (see also My presence, p. 119).Add to dSave WT ID in Addressbook.Invite user Invite a subscriber to a session.Add to group Add subscriber to the group.Delete Delete the list except for the last entry.Handsfree Switch on handsfree talking (loudspeaker).Request pres. Request information about the readiness to receive for a subscriber.Volume Set volume. I is also possible.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fmExtras118VAR Language: am; VAR issue date: 040819left page (118) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Records C¢S¢Walky Talky¢RecordsSelect the list of received and made WT calls as well as the option to delete all lists.You can mark subscribers for one session in the list.AStart session.The function Save as group in §Options§ can be used to combine entries in the list into a new group.GroupsC¢S¢Walky Talky¢GroupsOnly your groups are displayed and can be edited.Setting up a new group<New entry>Select.JFill in input fields:Walky Talky ID:Subscriber ID.Name: Group name.Type Now or Chat.Max users:Maximum number of group members ("0" means "no limit").Membership:Set if membership in this group is open to everyone (Open) or if the subscriber is limited to the member list (Limited).MemberlistAdd member to the group.Reject listList of subscribers which may not become members of this group.§Save§ Save group.<Rejectlist>List of subscribers with whom a session is not desired. Invitations from this list are always refused automatically.<Acceptlist>List of subscribers whose invitation is automatically accepted (see also Auto answer p. 119).Starting a session (group conversation)ISelect group.AStart session.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm119ExtrasVAR Language: am; VAR issue date: 040819left page (119) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Viewing group propertiesISelect group.CView properties.§Options§ Open menu. My presenceC¢S¢Walky Talky¢Presence¢My presenceThe following properties (yours) can be set:InterruptionAllow, forbid interruptionMood Display your mood.Notes Note.SettingsC¢S¢Walky Talky¢SettingsSome settings must be made by the user or can be copied from your service provider.ISelect and confirm the function, area.Load settingsDownload settings from the server of the service provider.WT onlineLog in/out, status information for login.Block WT callsAllow/block Walky talky calls.Auto answerAutomatically accept invitations because of the Accept list (p. 118).Use Acc.& Rej.Activate/deactivate the use of Accept list/Reject list p. 118/p. 118).Walky Talky•WT enabledActivate/deactivate Walky talky.•History length:Number of entries in the list.•Timeout(min.):Walky Talky is put in the background if not used after an adjustable amount of time.Add to dCopy group ID to the Addressbook.Edit Edit (your own) group.Copy ID to clip Save group ID (WT ID) in the clipboard.Memberlist Display the member list.Reject list Display the refused subscribers.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fmExtras120VAR Language: am; VAR issue date: 040819left page (120) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)•Hold modeDepending on the setting, §WalkyT.§ must be pressed and held to speak. •Default viewSession view or History view.•Request pres.The saved properties are displayed.ServerSettings for the server. Please check with your service provider.AdvancedFurther settings. Please check with your service provider.SIM services (optional)C¢S¢SIM servicesYour service provider may offer spe-cial applications such as mobile banking, share prices, etc. via the SIM card.If you have such a SIM card, the SIM services will appear in the main menu under "Extras" or directly above the soft key (on the left).USymbol for SIM services.Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone can support future addi-tions in your service provider's user package. For further information, please contact your service provider.Alarm clockC¢S¢Alarm clockThe alarm will ring at the time set by you, even when the phone is switched off. FActivate/deactivate the alarm.HSwitch to time setting.Additional informationIf an accessory such as the car kit is connected, its PoC key (push-and-talk over cellular "PoC" mode) also functions as a WT-key.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm121ExtrasVAR Language: am; VAR issue date: 040819left page (121) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)JSet alarm call time (hh:mm).HSwitch to the week days.FNavigate to the various days.CDisplay options: alarm call time and days.CSet days for alarm calls. Press again to delete the highlighting.Press and hold to highlight/unhighlight all the days.§OK§ Confirm setting.Sound recorderUse the sound recorder to record noises and tones for use as ring tones. The tone recording is nor-mally started by other applications/ functions such as "assign ring tone".New recordingStart from main menuC¢S¢Sound recorder<New entry>Select.The remaining time avail-able as well as the record-ing time are shown in the display.Start it from another application as followsThe recording display appears:CA brief tone sounds when the recording starts. CPause/record alternately.DEnd recording.The recording is saved with a timestamp in the folder Sounds. Rename with §Options§.§Insert§ Transfer recording into the application.Additional information¹Screen display in standby mode: alarm clock activated.With Pause you can set the alarm to repeat.éAlarm clock¹ §On§ 07:30Mo Tu We Th Fr Sa SuEdit ìOK
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fmExtras122VAR Language: am; VAR issue date: 040819left page (122) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)PlaybackISelect the desired record-ing.CPlayback/pause, alter-nately.D/EPress and hold rapid rewind and fast forward.§Options§ Open menu.CalculatorC¢S¢CalculatorThe calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the matrice with the calculation func-tions) are located in the top display half. JEnter number(s).F/INavigate functions.CUse function. The result is calculated and displayed immediately.Loudspeaker Playback via the built-in loudspeaker.Set as... Set the recording as a ringtone.(For standard functions see p. 23)Basic functions:+, -, *, / Basic calculation types.=Result.1/x Conversion%Convert to percentage..Decimal point.± Sign change "+" / "–"§Options§ Expansion of the range of functions:Square rootSquaree Exponent.MS save displayed number.MR Call up saved number.M+ Insert number from memory.xx2
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm123ExtrasVAR Language: am; VAR issue date: 040819left page (123) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Calculator options§Options§ Open menu.Unit converterC¢S¢Unit converterYou can convert various measure-ment units into other measurement units.The following types are offered with various units:Velocity Energy Mass Pressure Time Volume Area Length Power Temperature Currency Example of type Velocityunits: ConvertFSelect the source unit/ currency.HSwitch to the input field.JEnter the quantity to be converted. HSwitch to the selection field.FSelect the target meas-urement unit / currency The result is displayed.You can use both input fields alter-nately. Special key functions:*Set decimal point.#Change prefix. CurrencyWhen you call up the function, you must enter a basic currency into which the conversions are to be made. JEnter currency (e.g.euro)§Save§ Store entry.Convert Call up the unit con-verter with the current result.Clear all Delete all units.Extended mode/Basic mode Convert calculation functions.(For standard functions see p. 23)Type UnitsVelocity Kilometers/h, d Calls, Meters/sec, Miles/h, Miles/sec, Knots, Mach
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fmExtras124VAR Language: am; VAR issue date: 040819left page (124) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Now enter the name and exchange rate of the currency to be converted. §Options§ Open menu.StopwatchC¢S¢StopwatchTwo intermediate times can be recorded and saved. CStart/stop.*Save intermediate time.After a stop:CReset to zero.Stopwatch options§Options§ Open menu.CountdownC¢S¢CountdownA set time elapses. The last 3 seconds are indicated by a beep. At the end a special beep sounds. Display, also in standby mode.If no time has been enetered:COpen input window§Edit§ Activate input field.JSet period of time.§OK§ Confirm.CStart.If a countdown time is specified:CStart countdown.While the time is elapsing:CInterrupt counter.CLet counter continue running.§Reset§ Reset counter to starting time.Add currency Enter new currency and exchange rate.Set as base Use entered currency as basic currency.Edit rate Change the exchange rate of the basic currency.Calc. Start calculator.(For standard functions see p. 23)Stopwatch list Display saved entries.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm125ExtrasVAR Language: am; VAR issue date: 040819left page (125) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Remote synchronisationC¢S¢Remote sync.You can use this function remotely to access externally filed data (addresses, calendar, etc.) and syn-chronise these with the data on your phone. The data can, for example, be saved on a company computer or in the Internet.www.siemens-mobile.com/syncml Syncronise§Sync§ The computer is selected and synchronisation started. When completed, the actions which have been performed are dis-played.§Next§ Scroll through the various displays.Sync. settingThe following settings can be made prior to synchronisation:Sync. profileYou can choose between 5 profiles. ISelect profile.CActivate profile.or§Edit§ Set profileServer sett.Providers Display the current service provider.Homepage: e.g. www.siemens-mobile.com/cx70syncml Port: Enter port number, e.g. 80.Login: Enter user name (Login name).Password: Enter password (shown as a series of asterisks).Calendar pathContacts pathNotes pathTask pathHTTP authentica-tion.Confirmation required; Yes/No (if No, the input fields are not visible).HTTP name: Enter name.HTTP password: Enter password.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fmExtras126VAR Language: am; VAR issue date: 040819left page (126) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Last sync:Time of the last synchronisation.Sync. mode•Sync data: Modified data or All data •Sync instruction: Two-way, Device update or Server update Date rangeSelect On/off Enter the time in weeks in which entries (past and future) are to be synchronised. Sync items: Highlight database areas to be synchronised:Calendar Address book Notes Tasks CSave settings.Device manag.C¢S¢Device manag.If you were informed about software updates by a push message, you can establish a connection to the provider's server using the Device manager, so you can download them. When downloading is finished, you will be asked to switch the phone off and on again. Afterwards, the software of your phone will be updated. Please follow the instructions in the display.The phone default setting varies from service provider to service provider:• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be configured manually. If necessary, check with your service provider for details. You will find the current settings for the service provider on the Internet at www.siemens-mobile.com/mobilescustomercare under "FAQ".
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Extras.fm127ExtrasVAR Language: am; VAR issue date: 040819left page (127) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:31)Active profileA standard profile for downloading the current software of the operating system is displayed. §Sync§ Establish a connection to the active profile.Or §Edit§ Call up profile list.ISelect profile.CActivate profile.Or §Edit§ Set profile.Last connect.Display last connection.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MediaPlayer.fmMedia player128VAR Language: am; VAR issue date: 040819left page (128) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Media playerWhen you are viewing a picture/video or listening to a melody, the application starts a media playback. FScroll to the next media file.PicturesThe following functions can be applied to a displayed picture:CZoom function if the dis-played picture has a higher resolution than the display. The two soft keys (+/–) enlarge/reduce the picture. The joystick moves the picture detail.5 Centre the picture.#Switch to full-picture mode and back again.0-9Switch on display illumination (only in full screen mode).§Send§ e.g. send via MMS or e-mail.Melodies/videoThe media playback offers the fol-lowing functions for melody and video playback:CPlay or pause, depending on the situation.ISet volume.*Mute.§Stop§ Stop function.BEnd playback.Options§Options§ Open menu.Different functions are offered depending on the starting situation and the object.Volume Set the volume with the joystick.Set as... Set picture as Wallpaper, Logo for example, and sounds for Incoming call, Startup melody, for example.Slideshow Automatic run-through in full-picture mode. Individ-ual picture connection with joystick.Edit Access to picture proces-sing (application must be loaded).(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MediaFolder.fm129My stuffVAR Language: am; VAR issue date: 040819left page (129) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)My stuffTo organise your files, you can use the file system like a PC file manager. There are some folders in My stuff for the various data types for this pur-pose.Remember that pictures and sounds may be protected (DRM, p. 21).C¢N The list of the folders and files is dis-played.NavigationISelect file/folder in lists.F/ IThe cursor can be moved freely in the preview.COpen folder or start file with related application<New picture>/<New Sound>The application for the folder cur-rently selected is loaded.<New downl.>The WAP browser is started and the download page displayed.Own file options§Options§ Open menu.Move Place highlighted file(s) or folder in temporary memory.Copy Place highlighted file(s) or folder in temporary memory.Paste Transfer content of tem-porary memory into cur-rent folder. New folder Create a new folder and name it.Preview Switch over to miniature view.Attributes Display information on file or folder selected.(For standard functions see p. 23)
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MediaFolder.fmMy stuff130VAR Language: am; VAR issue date: 040819left page (130) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Index structureSome folders have already been cre-ated for different data types in My stuff. These folders cannot be changed.Folder Description FormatPictures Pictures bmpbmxjpg/jpegpnggifVideos Videos 3gpAnima-tions Switch on/off ani-mationsbmxgifSounds Melodies midamrwavThemes Loaded theme (zipped)Theme configura-tion (unzipped)sdtstcSkins Loaded user inter-faces.scsGames Java archiveDownload infojarjadApplications Applications, such as Photo Editor or Download Assistant.*Other Internet sites. htmlwmlDepending on the service provider, the structure, content and functionality of My stuff may vary.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_PhoneManager.fm131Mobile Phone ManagerVAR language: am; VAR issue date: 040819left page (131) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Mobile Phone ManagerThe Windows® PC program, MPM (Mobile Phone Manager) enables you to use extended phone func-tions from your PC. Among other things, you can easily manage your phone’s Addressbook, as well as read, store and send SMS and EMS messages. The phone and PC com-municate via IrDA or a data cable (See Accessories, p. 151). You can download the software from the Internet: www.siemens-mobile.com/cx70Contacts ManagementYou can use contacts management to manage the personal contacts you have stored in your phone, to add new ones and to delete and edit them. You can compare and copy contacts between your phone, Out-look®, Lotus Notes™ and other Sie-mens phones (including Gigaset).SMS and EMS managementWrite EMS and SMS messages from the convenience of your PC. Use all the options your PC offers you and use your sounds and pictures to cre-ate SMS and EMS messages. You can read, forward, print, delete and archive your messages.Backup and restoreWith the back-up function, you can regularly make a back-up copy of your phone data on the PC. If you ever lose the data on your phone or replace the phone, you can quickly re-instate all data with the restore function. Please observe any possi-ble restrictions for DRM-protected data.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_PhoneManager.fmMobile Phone Manager132VAR language: am; VAR issue date: 040819left page (132) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Bookmark ManagementUse your PC to browse on the Inter-net and define your preferred Inter-net sites. Save the Internet addresses as bookmarks on your phone so that you can quickly call them up at a later time when you are on the move. Phone explorerYou can use the phone explorer to read your phone’s file system. Files such as pictures, sounds and much more can easily be copied between the phone and PC by dragging and dropping.GPRS modemThe GPRS modem establishes an Internet connection via your mobile phone so that you can surf the Inter-net on your laptop while on the move and at the touch of a button. Processing pictures and photosPicture/photo processing offers you the opportunity to conveniently cre-ate, edit and manage pictures and photos. Filters and effects are offered to help you create colourful, attractive graphics. The user-friendly interface makes child’s play of trans-ferring pictures/photos from or to the mobile phone, and of changing the graphic settings.Ringtone ManagementThe sound module allows you to manage nearly all sound formats easily and to save them on the phone. This phone does not support MP3 functionality.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_FAQ.fm133Questions & AnswersVAR Language: am; VAR issue date: 040819left page (133) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Questions & AnswersIf you have any questions about using your phone, visit us at www.siemens-mobile.com/mobilescustomercare anytime. For additional help, we have listed below some frequently asked questions and answers.Configuration serviceTo help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet, you can use a configuration service. This service is used to have the necessary settings for your mobile phone sent to you by SMS. We recommend that you contact your network provider who will send you the configuration messages.As an alternative you can also use the "Setting Configurator" at www.siemens-mobile.com/mobilescustomercare. Siemens will then send you the configuration messages. Please follow the instructions contained in those messages.Problem Possible causes Possible solutionPhone cannot be switched on.On/Off key not pressed long enough.Press On/Off key for at least two seconds.Flat battery. Charge battery. Check charging indicator in the dis-play.Battery contacts dirty. Clean contacts.See also below under “Charging error”Too little standby time.Frequent use of organiser and games.Restrict use if necessary.Fast search activated. Deactivate speed search(p. 104).Display illumination on. Switch off display illumination (p. 88).Unintentional keystrokes (illumination!).Activate key lock (p. 101).Charging error(charge icon not displayed).Battery totally discharged. 1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours.3) Charge battery.Temperature out of range: +5 °C to +40 °C.Make sure the ambient temperature is right, wait for a while, then recharge.Contact problem. Check power supply and connection to the phone. Check battery contacts and telephone connection socket, clean them if necessary, then insert battery again.No mains voltage. Use different mains power socket, check mains voltage.Wrong charger. Only use original Siemens accessories.Battery faulty. Replace battery.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_FAQ.fmQuestions & Answers134VAR Language: am; VAR issue date: 040819left page (134) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)SIM error. SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 17).Dirty SIM card contacts. Clean SIM card with a dry cloth.SIM card with wrong voltage. Use 3V SIM cards only.SIM card damaged (e.g. bro-ken).Carry out a visual check. Change SIM card at serv-ice provider.No network connec-tion.Weak signal. Move higher, to a window or an open space.Outside GSM range. Check service provider's coverage area.Invalid SIM card. Complain to the service provider.New network not authorised. Try manual selection or select a different network (p. 103).Network call barring is set. Check network barrings (p. 102).Network overloaded. Try again later.Phone loses net-work.Signal too weak. Reconnection to another service provider is auto-matic (p. 103). Switching phone off and on again can speed this up.Calls not possible. Second line set. Set first line \ (p. 104).New SIM card inserted. Check for new barrings.Charge limit reached. Reset limit with PIN 2 (p. 47).Credit used up. Load credit.Certain uses of phone not possible.Call restrictions are in place. Barrings can be set by service provider. Check barrings (p. 102).Impossible to make entries in Phone-book/Addressbook.Phonebook/Addressbook is full. Delete entries in Phonebook /Addressbook (p. 23).Voice message not functioning.Call divert to mailbox not set. Set call divert to mailbox (p. 76).ã flashes to indi-cate an SMS.SMS memory is full. Delete or file SMS (p. 23).ä flashes to indi-cate an MMS.MMS memory full. Delete MMS (p. 23).å flashes to indi-cate an MMS.Phone memory full. Delete messages, pictures, videos, games or appli-cations.Function cannot be set.Not supported by service pro-vider or registration required.Contact your service provider.Capacity problems with, for example, Games & More, ring-tones, pictures, vid-eos, SMS archive.Phone memory full. Delete files in the relevant areas. You can use the memory assistant to delete specific files (p. 94).Problem Possible causes Possible solution
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_FAQ.fm135Questions & AnswersVAR Language: am; VAR issue date: 040819left page (135) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)No WAP access, downloading not possible.Profile not activated, profile set-tings wrong/incomplete.Activate or set WAP profile (p. 80). If necessary ask your service provider.Text message can-not be sent.Service provider does not sup-port this service.Contact your service provider.Phone number for service cen-tre not set or incorrectly set.Set service centre (p. 55).SIM card contract does not sup-port this service.Contact your service provider.Service centre too busy. Repeat message.Recipient does not have a compatible phone.Check.EMS pictures & sounds are not dis-played at the desti-nation phoneDestination phone does not sup-port the EMS standard.No Internet access possible.Incorrect WAP profile set, or wrong or incomplete settings.Check WAP settings; (p. 80) contact your service provider if necessary.PIN error/PIN2 error.Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider.Phone code error. Three wrong entries. Contact Siemens Service (p. 149).Service providerCode error.No authorisation for this service. Contact your service provider.Too few/too many menu entries.Functions may have been added or deleted by the service provider via the SIM card.Check with your service provider.No fax possible. Wrong settings in the PC. Check settings (p. 99).No authorisation for this service. Contact your service provider.Charge meter does not work.Charge pulse is not transmitted. Contact your service provider.DamageSevere shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry connector contacts thoroughly. Stand mobile upright in an air current. Do not disman-tle the phone!Problem Possible causes Possible solutionReset all settings to factory default p. 95: * # 9 9 9 9 # A
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Maintenance.fmCare and maintenance136VAR Language: am; VAR issue date: 040819left page (136) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Care and maintenanceYour phone has been designed and manufactured to the highest of standards and should be treated with great care. The suggestions below will help you to enjoy your phone for many years.• Protect your phone from moisture and humidity! Precipitation, humidity and liquids contain min-erals that will corrode electronic circuits. Should your phone none-theless become wet, disconnect it immediately from any power sup-ply, remove the battery and leave the open phone to dry at room temperature!• Do not use or store the phone in dusty, dirty areas. Its moving parts may become damaged.• Do not store your phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. • Do not store your phone in cold areas. When the phone warms up again (to its normal ambient tem-perature), moisture can form inside the phone, which may dam-age electronic circuit boards. • Do not drop, knock or shake your phone. Rough handling can dam-age internal circuit boards!• Do not use harsh chemicals, clean-ing solvents, or strong detergents to clean the phone!The suggestions given above apply equally to your phone, battery, charger and all accessories. If any of these parts are not working properly, take them to your nearest qualified service outlet. The personnel there will assist you and, if necessary, repair the device.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fm137U.S. FDAVAR Language: am; VAR issue date: 040819left page (137) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)U.S. FDAThe U.S. Food and Drug Administration's (FDA) Center for Devices and Radiological Health Consumer Update on Mobile PhonesFDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is know – and what remains unknown – about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This in-formation may be used to respond to questions.Why the concern?Mobile phones emit low levels of ra-dio frequency energy (i.e., radio fre-quency radiation) in the microwave range while being used. They also emit very low levels of radio frequen-cy energy (RF), considered non-sig-nificant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these ques-tions, no clear picture of the biologi-cal effects of this type of radiation has emerged to date. Thus, the avail-able science does not allow us to conclude that mobile phones are ab-solutely safe, or that they are unsafe. However, the available scientific evi-dence does not demonstrate ad-verse health effects associated with the use of mobile phones.What kinds of phones are in question?Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversa-tion. These types of mobile phones are of concern because of the short distance between the phone's an-tenna – the primary source of the RF – and the person's head. The ex-posure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a per-son's RF exposure decreases rapidly with distance from the source. The safety of so-called "cordless phones", which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fmU.S. FDA138VAR Language: am; VAR issue date: 040819left page (138) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)How much evidence is there that hand-held mobile phones might be harmful?Briefly, there is not enough evidence to know for sure, either way; howev-er, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments inves-tigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results. A few ani-mal studies, however, have suggest-ed that low levels of RF could accel-erate the development of cancer in laboratory animals. In one study, mice genetically altered to be predis-posed to developing one type of can-cer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether re-sults obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the stud-ies showed increased tumor devel-opment used animals that had al-ready been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtu-ally continuously – up to 22 hours per day.For the past five years in the United States, the mobile phone industry has supported research into the safe-ty of mobile phones. This research has resulted in two findings in partic-ular that merit additional study:1. In a hospital-based, case-control study, researchers looked for an as-sociation between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a be-nign tumor of the nerve sheath). No statistically significant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of gliomas were considered together. It should be noted that the average length of mobile phone ex-posure in this study was less than three years.When 20 types of glioma were con-sidered separately, however, an as-sociation was found between mobile phone use and one rare type of glio-ma, neuroepithelliomatous tumors. It is possible with multiple compari-sons of the same sample that this as-sociation occurred by chance. More-over, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer causing agents in-crease risk with increased exposure. An ongoing study of brain cancers by the National Cancer Institute is ex-pected to bear on the accuracy and repeatability of these results.1
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fm139U.S. FDAVAR Language: am; VAR issue date: 040819left page (139) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)2. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of ab-normalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural chang-es in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after expo-sure to simulated cell phone radia-tion, but only after 24 hours of expo-sure. It is possible that exposing the test cells to radiation for this long re-sulted in heating. Since this assay is known to be sensitive to heating, heat alone could have caused the ab-normalities to occur. The data al-ready in the literature on the re-sponse of the micronucleus assay to RF are conflicting. Thus follow-up re-search is necessary. 2FDA is currently working with gov-ernment, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cel-lular Telecommunications Industry Association (CTIA) in particular is ex-pected to lead to FDA providing re-search recommendations and scien-tific oversight of new CTIA-funded research based on such recommen-dations.Two other studies of interest have been reported recently in the litera-ture:• Two groups of 18 people were ex-posed to simulated mobile phone signals under laboratory condi-tions while they performed cogni-tive function tests. There were no changes in the subjects' ability to recall words, numbers, or pic-tures, or in their spatial memory, but they were able to make choic-es more quickly in one visual test when they were exposed to simu-lated mobile phone signals. This was the only change noted among more than 20 variables com-pared.3• In a study of 209 brain tumor cas-es and 425 matched controls, there was no increased risk of brain tumors associated with mo-bile phone use. When tumors did exist in certain locations, howev-er, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small num-ber of cases, the increased likeli-hood was too small to be statistically significant.4In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems as-sociated with use of mobile phones. FDA continues to work with all par-ties, including other federal agencies
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fmU.S. FDA140VAR Language: am; VAR issue date: 040819left page (140) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)and industry, to assure that research is undertaken to provide the neces-sary answers to the outstanding questions about the safety of mobile phones.What is known about cases of human cancer that have been reported in users of hand-held mobile phones?Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. popu-lation at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increas-ing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to com-pare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched peo-ple without brain cancer. This is called a case-control study. The cur-rent case-control study of brain can-cers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information.What is FDA's role concerning the safety of mobile phones?Under the law, FDA does not review the safety of radiation emitting con-sumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manu-facturers of mobile phones to notify users of the health hazard and to re-pair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mo-bile phone industry to take a number of steps to assure public safety. The agency has recommended that the industry:• Support needed research into pos-sible biological effects of RF of the type emitted by mobile phones;• Design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fm141U.S. FDAVAR Language: am; VAR issue date: 040819left page (141) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)• Cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health.At the same time, FDA belongs to an interagency working group of the federal agencies that have responsi-bility for different aspects of mobile phone safety to ensure a coordinat-ed effort at the federal level. These agencies are:• National Institute for Occupation-al Safety and Health• Environmental Protection Agency• Federal Communications Com-mission• Occupational Health and Safety Administration• National Telecommunications and Information AdministrationThe National Institutes of Health also participates in this group.In the absence of conclusive information about any possible risk, what can con-cerned individuals do?If there is a risk from these products – and at this point we do not know that there is – it is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a per-son receives. Those persons who spend long periods of time on their hand-held mobile phones could con-sider holding lengthy conversations on conventional phones and reserv-ing the hand-held models for shorter conversations or for situations when other types of phones are not avail-able.People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance be-tween their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:• a mobile phone in which the an-tenna is located outside the vehi-cle,• a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or• a headset with a remote antenna to a mobile phone carried at the waist.Where can I find additional information?For additional information, see the following websites:• Federal Communications Com-mission (FCC) RF Safety Program (select "Information on Human Ex-posure to RF Fields from Cellular and PCS Radio Transmitters"): http://www.fcc.gov/oet/rfsafety
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fmU.S. FDA142VAR Language: am; VAR issue date: 040819left page (142) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)• World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf• United Kingdom, National Radio-logical Protection Board: http://www.nrpb.org.uk• Cellular Telecommunications In-dustry Association (CTIA): http://www.wow-com.com• U.S. Food and Drug Administra-tion (FDA) Center for devices and Radiological Health: http://www.fda.gov/cdhr/consumer/1 Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Sympo-sium; 1999 June 20; Long Beach, California.2 Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environ-mental Mutagen Society; March 29, 1999, Washington, DC; and personal communica-tion, unpublished results.3 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915- MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.4 Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular telephones and the risk for brain tumors; a case-control study. Int. J. Oncol,15: 113–116, 1999.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\FDA.fm143FCC/Industry Canada NoticeVAR Language: am; VAR issue date: 040819left page (143) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)FCC/Industry Canada NoticeYour phone may cause TV or radio in-terference (for example, when using a telephone in close proximity to re-ceiving equipment). The FCC or In-dustry Canada can require you to stop using your telephone if such in-terference cannot be eliminated. If you require assistance, please con-tact your local service facility.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\Driving_Tips.fmTen driving safety tips144VAR Language: am; VAR issue date: 040819left page (144) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Ten driving safety tipsYour Siemens wireless phone gives you the power to communicate by voice – almost anywhere, anytime. But an important responsibility ac-companies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:Get to know your phone and its features such as speed dial and redial.Carefully read your instruction man-ual and learn to take advantage of valuable features most phones offer including, automatic redial and memory dial – most phones can store up to 99 numbers in memory dial. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.When available, use a hands-free device.A number of hands-free wireless phone accessories are readily avail-able today. Whether you choose an installed mounted device for your phone or a speaker phone accessory, take advantage of these devices if they are available to you.Position your phone within easy reach.Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voicemail answer it for you.Suspend conversations during hazard-ous driving conditions or situations.Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazard-ous, but so is heavy traffic. As a driv-er, your first responsibility is to pay attention to the road.Do not take notes or look up phone num-bers while driving.If you are reading an address book or business card while driving a car, or writing a "to do" list, then you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying at-tention to the road or nearby vehi-cles.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\Driving_Tips.fm145Ten driving safety tipsVAR Language: am; VAR issue date: 040819left page (145) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Dial sensibly and assess the traffic.If possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip, or attempt to co-incide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this sim-ple tip – dial only a few numbers, check the road and your mirrors, then continue.Do not engage in stressful or emotional conversations that may be distracting.Stressful or emotional conversations and driving do not mix – they are dis-tracting and even dangerous when you are behind the wheel. Make peo-ple you are talking with aware you are driving and if necessary, suspend phone conversations that have the potential to divert your attention from the road.Use your phone to call for help.Your wireless phone is one of the greatest tools you can own to pro-tect yourself and your family in dan-gerous situations – with your phone at your side, help is only three num-bers away. Dial 9-1-1 in the case of fire, traffic accident, road hazard, or medical emergency. Remember, it is a free call on your wireless phone.Use your phone to help others in emergencies.Your wireless phone provides you a perfect opportunity to be a "good Samaritan" in your community. If you see an auto accident, crime in progress or other serious emergen-cies where lives are in danger, call 9-1-1, as you would want others to do for you.Call roadside assistance or a special wireless non-emergency assistance number when necessary.Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call to 9-1-1. But you can still use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless numbers.Provided by the Cellular Telecommunica-tions Industry Association (CTIA)"The wireless industry reminds you to use your phone safely when driving."For more information, please call 1 (888) 901-SAFE, or visit our Web site at: www.wow-com.com
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\intellectual_property.fmIntellectual property146VAR Language: am; VAR issue date: 040819left page (146) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Intellectual property Intellectual Property RestrictionsAll Intellectual Property, as defined below, which is owned by or other-wise the property of Siemens Infor-mation and Communications Mo-bile, LLC ("Siemens"), its affiliates, partners or suppliers, relating to the Phone, including but not limited to accessories, parts or software relat-ing thereto (the "Phone System"), is proprietary under federal laws, state laws and International treaty provi-sions. Intellectual Property includes, but is not limited to, inventions (pat-entable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. More-over, you agree that you will not (and will not attempt to) disassem-ble, decompile, reverse engineer, prepare derivative works from, mod-ify or make any other effort to create source code from the software. No title to ownership in the Intellectual Property is transferred to you through purchase or possession of the Phone or its components. All ap-plicable rights of the Intellectual Property shall remain with Siemens, its affiliates, partners or suppliers.Siemens will have no liability with re-spect to any claim of patent infringe-ment which is based upon the com-bination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by Siemens, nor will Siemens have any liability for the use of ancillary equipment or software not fur-nished by Siemens which is attached to or used in connection with the Product, The foregoing states the en-tire liability of Siemens with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for Siemens cer-tain exclusive rights for copyrighted Siemens software, such as the exclu-sive rights to reproduce and distrib-ute copies of such Siemens software. Siemens software may be used only in the Product in which the software was originally embodied when pur-chased, and such software in such Product may not be replaced, cop-ied, distributed. modified in any way, or used to produce any deriva-tive thereof. No other use including, without limitation, alteration, modi-fication, reproduction, distribution. or reverse engineering of such Siemens software or exercise of rights in such Siemens software is permitted. No license is granted by implication, estoppel or otherwise under Siemens patent rights or copyrights.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Data.fm147Product dataVAR Language: am; VAR issue date: 040819left page (147) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Product dataDeclaration of conformitySiemens Information and Communication mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The declaration of con-formity (DoC) concerned has been signed. Please call the company hotline if you require a copy of the original, or: www.siemens-mobile.com/conformity Technical data The SAR value specified on p. 134 does not apply to phones equipped with "Emoty CLIPit Cover“ (p. 80) or other CLIPit covers.Operating timeThe operating time depends upon the respective conditions of use: Extreme temperatures considerably reduce the phone’s standby time. Avoid placing the phone in the sun or on a heater.Call time: 100 to 330 minutesStandby time: 60 to 300 hoursGSM class: 4 (2 watt)Frequency range: 880 … 960 MHzGSM class: 1 (1 watt)Frequency range: 1.710 … 1.880 MHzGSM class: 1 (1 watt)Frequency range: 1.850 … 1.990 MHzWeight: 90 gSize: 101 x46x18 mm(78 ccm)4 x 1.8 x 0.7 in.(4.76 cu. in.)Li-Ion battery: 750 mAhOperating temperature:– 10 °C… + 55 °C(14 °F to 130 °F)SIM card: 3.0 VPhone IDYou will need the following details if you lose your phone or SIM card: the number of the SIM card (on the card):..............................................................15 digit serial number of the phone (under the battery):..............................................................the customer service number of the service provider:..............................................................Lost phoneIf you lose your phone or SIM card contact your service provider immediately to pre-vent misuse.Action taken Time(min)Reduction of stand-by time byCalling 1 30–90 minutesLight * 1 40 minutesNetwork search1 5–10 minutes* Key input, games, organiser etc.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\SAR.fmSAR (CX70)148VAR Language: am; VAR issue date: 040819left page (148) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)SAR (CX70)RF EXPOSURE/SPECIFIC ABSORPTION RATE (SAR) INFORMATIONTHIS SIEMENS CX70 PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO ELECTROMAGNETIC FIELDS.Your cell phone is a radio transmitter and receiver. It is designed and man-ufactured not to exceed the emission limits for exposure to radio frequen-cy (RF) energy established by the Federal Communications Commis-sion (FCC) of the U.S. Government and by Health Canada. These limits are part of comprehensive guide-lines and establish permitted levels of RF energy for the general popula-tion. The guidelines were developed and confirmed by independent sci-entific organizations through period-ic and thorough evaluation of scien-tific studies*. The limits include a substantial safety margin designed to assure the safety of all persons, re-gardless of age and health.The exposure standard for cell phones employs a unit of measure-ment known as the Specific Absorp-tion Rate, or SAR. The SAR limit es-tablished by the FCC and by Health Canada is 1.6 W/kg**. Tests for SAR are conducted using standard oper-ating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest cer-tified power level in all tested fre-quency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base sta-tion, the lower the power output. Before a phone model is available for sale to the public, it must be tested and the manufacturer must certify to the FCC and Industry Canada that it does not exceed the limit estab-lished by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body), reported to the FCC and available for review by Industry Canada. The highest SAR value for this Siemens CX70 when tested for use at the ear is0.65 W/kg***and when worn on the body+ is0.73 W/kg***Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Internet Association (CTIA) web-site at www.phonefacts.net or the Canadi-an Wireless Telecommunications As-sociation (CWTA) websitewww.cwta.caSAR information on this Siemens CX70 phone is on file with the FCC and can be found under the Display
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\SAR.fm149SAR (CX70)VAR Language: am; VAR issue date: 040819left page (149) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID PXW-CX70.While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the governmental requirements for safe RF exposure. + This cell phone has been tested for body worn operation and meets FCC RF exposure guide-lines when used with a Siemens accessory designated for this product, where available, or when used with a carry accesso-ry that contains no metal and that positions the handset at least 2.2 cm/0.87 in is the cor-rect testing distance from the body. Use of other carry accesso-ries may not ensure compliance with FCC RF exposure guide-lines.* The World Health Organization (WHO, CH-1211 Geneva 27, Switzerland), on the basis of the current knowledge, does not see any necessity for special precautionary measures when using cell phones.Further information: www.who.int/peh-emf, www.mmfai.org, www.siemens-mobile.com.** averaged over 1 g of tissue.***SAR values may vary depending on national requirements and network bands. SAR information for different regions can be found at www.siemens-mobile.com
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Quality.fmBattery quality statement150VAR Language: am; VAR issue date: 040819left page (150) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Battery quality statementThe capacity of your mobile phone battery will reduce each time it is charged/emptied. Storage at too high or low temperatures will also result in a gradual capacity loss. As a result the operating time of your mobile phone may be considerably reduced, even after a full recharge of the battery.Regardless of this, the battery has been designed and manufactured so that it can be recharged and used for six months after the purchase of your mobile phone. After six months, if the battery is clearly suf-fering from loss of performance, we recommend that you replace it. Please buy only Siemens original batteries.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Accessory.fm151AccessoriesVAR Language: am; VAR issue date: 040819left page (151) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:32)AccessoriesFashion & CarryCLIPit™ CoversChangeable top shells as well as keyboards area available in specialist shops. Alterna-tively, you can visit our online shop.Carrying CasesA range of carry cases is available at spe-cialist shops or you can visit the Siemens Mobile Store online:EnergyLi-Ion Battery (750 mAh) EBA-660Spare battery.Travel ChargerTravel Charger EU ETC-500Travel Charger UK ETC-510Travel charger with an extended input volt-age range of 100–240 V.Car Charger Plus ECC-600Charger for the cigarette lighter socket in the car. It is possible to make telephone calls during charging.Handsfree PortableHeadset Basic HHS-500Headset without keys; accepting and ending calls is done using the phone.Headset HHS-510Headset with key to accept and end calls.Headset Purestyle HHS-610High quality headset with button for accepting and ending calls. An ear hook which can be adjusted for the left or the right ear, makes it more comfortable to wear.USB DCA-510 data cableFor connecting the phone to the USB port of the PC. With load function.OfficeData Cable DCA-500For connecting the phone to the serial RS232 port of the PC.USB DCA-510 data cableFor connecting the phone to the USB port of the PC. With load function.Data Cable USB DCA-540For connecting the phone to the USB port of the PC. With load function.SyncStation DSC-600Table support for the telephone to facilitate simultaneous data exchange and telephone charging. Contains a desktop stand and a USB data cable.Original Siemens Accessorieswww.siemens-mobile.com/shop
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_Accessory.fmAccessories152VAR Language: am; VAR issue date: 040819left page (152) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 16:32)MultitainmentEmoty CLIPit CoverThis cover is used to "transfer" your emotions to animated figures via the integrated pressure, touch, and vibration sensors. The animations can then be sent as normal MMS and received from any MMS compatible phone.Plug-in Flash IFL-600Plug-in flash module for taking photos in areas with low ambient light.Car Solutions Mobile Holder HMH-680Cradle without antenna port.Mobile Holder HMH-685The cradle for connecting an external antenna. Ideal for use with headset PoC key (push-and-talk over cellular "PoC" mode) or car kit portable.Can also be used as cradle for retrofitting your handsfree car kit (series 55).Car Kit Comfort HKC-680Handsfree kit with first-class digital call qual-ity and supreme ease of use. Includes all components needed for installation. The individual antenna solution is available in specialist shops.Car Kit Easy HKP-600Facilitates convenient handsfree talking with high call quality. With the integrated, rotating cradle and the flexible microphone position-ing, the telephone can be optimally adjusted to suit any vehicle interior. The power is sup-plied via the cigarette lighter socket.Optional Car Kit accessoriesCar Data Adapter HKO-690Phone-In Adapter Cable HKO-570Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessorieswww.siemens-mobile.com/shop
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\EndUserLic.fm153End user license agreementVAR Language: am; VAR issue date: 040819left page (153) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)End user license agreementThis Software License Agreement ("Agreement") is between You and Siemens Information and Communi-cation Mobile, LLC and/or one of its affiliates ("Licensor"). The Agree-ment authorizes You to use the Soft-ware specified in Clause 1 below, which may be included on Your phone, stored on a CD-ROM, sent to You by electronic mail, downloaded from Licensor's Web pages or servers or from other sources under the terms and conditions set forth be-low. This is an agreement on end user rights and not an agreement for sale. Licensor continues to own the copy of the Software and any other copy that You are authorized to make pursuant to this Agreement. Read this Agreement carefully be-fore installing, downloading or using the Software. Further, by installing, downloading and/or using the Soft-ware, You agree to the terms and conditions of this Agreement.1. Software.As used in this Agreement, the term "Software" means, collectively: (i) all the software in Your phone, all of the contents of the disk(s), CD-ROM(s), electronic mail and its file attachments, or other media with which this Agreement is provided; (ii) related Licensor or third party software; (iii) digital images, stock photographs, clip art or other artistic works ("Stock Files") (iv) related ex-planatory written materials ("Documentation"); (v) fonts (vi) up-grades, modified versions, updates, additions and copies of the Soft-ware, if any, licensed to You by Li-censor (collectively "Updates") and (vii) any other possible documenta-tion related thereto.2. End user rights and use.Licensor grants to You a non-exclu-sive, non-transferable end user right to install the Software or use the Software installed on the phone. The Software is licensed with the phone as a single integrated product and may be used with the phone only as set forth in these licensing terms.3. Limitations on end user rights.(a) You may not copy, distribute, or make derivative works of the Soft-ware.(b) You may not use, modify, trans-late, reproduce or transfer the right to use the Software or copy the Soft-ware except as expressly provided in this Agreement.(c) You may not resell, sublicense, rent, lease or lend the Software; ex-cept You may permanently transfer all of Your rights as set forth in the Agreement only as part of a perma-nent sale or transfer of the phone, provided the recipient agrees to the terms of this Agreement.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\EndUserLic.fmEnd user license agreement154VAR Language: am; VAR issue date: 040819left page (154) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)(d) You may not reverse engineer, reverse compile, disassemble or oth-erwise attempt to discover the source code of the Software (except to the extent that this restriction is expressly prohibited by law) or cre-ate derivative works based on the Software.(e) You shall not display, modify, re-produce or distribute any of the Stock Files included with the Soft-ware.(f) You shall not display, modify, re-produce or distribute any of the pre-loaded content included with the software unless permitted as stated in the User Guide or in the prompts in the Software. In the event that You are allowed to display, modify, reproduce or distribute certain parts of the pre-loaded content, You shall review the "Readme" files associated with the pre-loaded content (con-tained on the CD) to ascertain what rights You have with respect to such materials. Pre-loaded content may not be used in the production of li-belous, defamatory, fraudulent, in-fringing, lewd, obscene or pornographic material or in any oth-erwise illegal manner. You agree that You shall only use the pre-load-ed content in a manner that com-plies with all applicable laws, including, but not limited to, applica-ble restrictions concerning copyright and other intellectual property rights. You may not register or claim any rights in the pre-loaded content or derivative works thereof.(g) You agree that You shall only use the Software in a manner that com-plies with all applicable laws in the jurisdiction in which You use the Software, including, but not limited to, applicable restrictions concern-ing copyright and other intellectual property rights.4. Copyright.Licensor and/or its software suppli-ers and their respective affiliates own the Software and all rights, in-cluding without limitation including proprietary rights therein, are pro-tected by international treaty provi-sions and other applicable national laws of the country in which it is be-ing used. The structure, organization and code of the Software are the valuable trade secrets and confiden-tial information.5. Multiple copies/updates.If the Software supports multiple platforms or languages, if You re-ceive the Software on multiple me-dia, of if You otherwise receive multiple copies of the Software, the number of phones on which all ver-sions of the Software are installed shall be one phone. If the Software is an Update to a previous version of the Software, You must possess a valid end user right to such previous
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\EndUserLic.fm155End user license agreementVAR Language: am; VAR issue date: 040819left page (155) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)version in order to use the Update and You may use the previous ver-sion for ninety (90) days after You receive the Update in order to assist You in the transition to the Update. After such time You no longer have a right to use the previous version, ex-cept for the sole purpose of enabling You to install the Update.6. Commencement & termination.This Agreement is effective from the first date You use or install the Soft-ware. Your end user rights automati-cally and immediately terminate without notice from Licensor if You fail to comply with any provision of this Agreement. In such event, You must immediately delete, destroy or return at Your own cost and ex-pense, and without entitlement to any refund of the purchase price, the phone and the Software, and all re-lated material to Licensor.7. EXCEPT AS EXPRESSLY PROVIDED IN THE LIMITED WARRANTY FOR THE PHONE, YOU ACKNOWLEDGE THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED. TO THE MAXI-MUM EXTENT PERMITTED BY APPLI-CABLE LAW NEITHER LICENSOR, LICENSOR'S SOFTWARE SUPPLIERS OR THEIR RESPECTIVE AFFILIATES, NOR THE COPYRIGHT HOLDERS MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANT-ABILITY OR FITNESS FOR A PARTICU-LAR PURPOSE OR THAT THE SOFTWARE WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPY-RIGHTS, TRADEMARKS OR OTHER RIGHTS. THERE IS NO WARRANTY BY LICENSOR OR BY ANY OTHER PARTY THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPER-ATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE.8. NOT FAULT TOLERANT. THE SOFT-WARE MAY CONTAIN TECHNOLOY THAT IS NOT FAULT TOLERANT AND IS NOT DESIGNED, MANUFACTURED, OR INTENDED FOR USE IN ENVIRON-MENTS OR APPLICATIONS IN WHICH THE FAILURE OF THE LICENSED SOFTWARE COULD LEAD DIRECLTY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMEN-TAL DAMAGE OR FINANCIAL LOSS.9. Limitation of liability.TO THE MAXIMUM EXTENT PERMIT-TED BY APPLICABLE LAW, IN NO EVENT SHALL LICENSOR OR LICEN-SOR'S SOFTWARE SUPPLIERS OR THEIR RESPECITVE AFFILIATES AND EMPLOYEES BE LIABLE FOR ANY LOST PROFITS, REVENUE, SALES, DATA OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVIC-ES, PROPERTY DAMAGE, PERSONAL INJURY, INTERRUPTION OF BUSI-NESS, LOSS OF BUSINESS INFORMA-TION OR FOR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL, ECONOMIC,
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\EndUserLic.fmEnd user license agreement156VAR Language: am; VAR issue date: 040819left page (156) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)COVER, PUNITIVE, SPECIAL OR CON-SEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER ARISING UN-DER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY ARISING OUT OF THE USE OF OR IN-ABILITY TO USE THE SOFTWARE, EVEN IF LICENSOR OR ITS SOFTWARE SUPPLIERS ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BE-CAUSE SOME COUN-TRIES/STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIM-ITATION OF LIABILITY, BUT MAY AL-LOW LIABILITY TO BE LIMITED, IN SUCH CASES, THE LIABILITY OF LI-CENSOR, ITS SOFTWARE SUPPLIERS AND THEIR RESPECTIVE AFFILIATES AND EMPLOYEES SHALL BE LIMITED TO, AT LICENSOR'S OPTION, EITHER (A) RETURN OF THE PRICE PAID LESS A REASONABLE AMOUNT FOR US-AGE, OR (B) REPAIR OR REPLACMENT OF THE SOFTWARE THAT DOES NOT MEET THE LIMITED WARRANTY PRO-VIDED WITH THE PHONE AND WHICH IS RETURNED IN ACCORDANCE WITH THE REQUIREMENTS OF THE LIMITED WARRANTY.Nothing contained in this Agree-ment shall prejudice the statutory rights of any party dealing as a con-sumer. Nothing contained in this Agreement limits Licensor's liability to You in the event of death or per-sonal injury resulting from Licensor's negligence if law prohibits such a limitation. Licensor is acting on be-half of its software suppliers and their respective employees and affili-ates for the purpose of disclaiming, excluding and/or restricting obliga-tions, warranties and liability as pro-vided in this clause 9, but in no other respects and for no other purpose.10. Technical support.Licensor has no obligation to furnish You with technical support except as agreed in writing between You and Licensor in the Limited Warranty pro-vided with the phone.11. Export control.The Software may be subject to ex-port regulations of the United States and other countries. You agree that You shall comply with all applicable export laws, restrictions and regula-tions of the United States or foreign agencies or authorities, and shall not export, or transfer for the purpose of re-export, any Software, product or technical data received under this Agreement or any Software or prod-uct produced by use of such techni-cal data, including processes and services, in violation of any applica-ble restrictions, laws or regulations, or without all necessary approvals.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\EndUserLic.fm157End user license agreementVAR Language: am; VAR issue date: 040819left page (157) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)12. Applicable law & general provisions.This Agreement shall be governed by and construed in accordance with the laws of the State of California without regard to its conflicts of laws rules. This is the entire agreement between Licensor and You relating to the Software and it supersedes any prior representations, discus-sions, undertakings, end user agree-ments, communications or advertising relating to the Software.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MenuTree.fmMenu tree158VAR Language: am; VAR issue date: 040819left page (158) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Menu treeDefault book >Show entries<New entry>Business cardGroupsDefault book<Info numbers>Call records >Missed callsCalls receivedCalls dialedDelete recordsDur./charges >All callsAll incom.callsAll outgoingRemain. unitsCharge setting >CurrencyCharge/UnitSurf & fun >URL/service provider Account limitGames Auto displayApplicationsDownload wiz.BookmarksEmotyInternetCameraMessages >Create new >SMSMMSE-mailChat room
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MenuTree.fm159Menu treeVAR Language: am; VAR issue date: 040819left page (159) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Messages >Inbox >SMSMMSE-mailWAP pushRetrieve emailSend/receiveCB services>Draft >SMSMMSE-mail>Unsent >SMSMMSE-mailRetrieve emailSend/receive>Sent items >SMSMMSE-mail>MMS templates>SMS archive>Text modules>Msg settings >Zoom inSMS >SMS profilesSMS signatureMMS >MMS profile:User settingsHelp
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MenuTree.fmMenu tree160VAR Language: am; VAR issue date: 040819left page (160) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Messages >Msg settings >E-mail >AccountsGeneral sett.WAP push set. HelpVoice messageOrganizer >Calendar CB servicesAppointmentsTasksNotesMissed appts.Dictation macTime zonesCalend. setupExtras >SIM servicesWalky TalkyAlarm clockSound recorderCalculatorUnit converterStopwatchCountdownDevice manag.Remote sync.My stuffSetup >Profiles>Topics>Display >LanguageText input >T9 preferredWallpaper Input languageLogoColor schemeScreensaverStart up anim.Shutdn anim.
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MenuTree.fm161Menu treeVAR Language: am; VAR issue date: 040819left page (161) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup >Display >GreetingLarge lettersIllumination>Dynamic light>Ring tones >Ringer settingSilent alertVolume >Incoming callWalky TalkyMessagesCB servicesAlarm clockd Calls OrganizerGroup calls SystemOther callsWalky TalkyMore melodies >MessagesAlarm clockOrganizerStartup melodyShutdown mel.>Phone Pilot Sound recorder>Call setup >Hide IDCall waitingDivert >All callsCall screening Not reachableAny key No replyMinute beep BusyReceiving faxReceiving dataStatus checkClear all
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MenuTree.fmMenu tree162VAR Language: am; VAR issue date: 040819left page (162) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Setup >Phone setup >Key tonesInfo tonesAutomatic switch offPhone identityMemory assis.File system >FormatFact. settings Clean up>Clock >Time/dateTime zonesDate formatTime formatBuddhist dateShow clockAuto time zone>Connectivity >GPRSGPRS infoIrDAData servicesHTTP profileAuthenticationFax/data >Send voice/faxRec voice/fax>Security >Auto key lock Rec fax/dataDirect callOnly ‚Codes >PIN controlThis SIM only Change PINChange PIN2Chg.phonecodeSetup >Security >Barring >All outgoing
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_MenuTree.fm163Menu treeVAR Language: am; VAR issue date: 040819left page (163) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Outgoing intl.Out.int.x homeAll incomingWhen roamingStatus checkClear all>Network >Line >Select lineNetwork info ProtectedChoose netwrkAuto networkPreferred netBand selectionFast searchUser group >ActiveSelect groupAll outgoingPref. group>Accessories >Car Kit >Auto answerAutomatic switch offCar loudspk.Key assmnt.Headset >Auto answer
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SIX.fmIndex164VAR Language: am; VAR issue date: 040819left page (164) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)IndexAAccessories ....................................151Additional books .............................45AddressbookDial entry ..................................... 41Groups.......................................... 42New entry .................................... 39Read entry....................................41Aircraft mode................................... 84AlarmAlarm clock................................120Type............................................111Alarm clock ....................................120All calls (call time/charge)..............47All calls (diversion).......................... 93All incoming (barrings) ................ 102Answering service (external)......... 76Any to answer ................................. 93Appointments................................110Authentication .............................. 100Auto displayClock.............................................96Duration/charges ........................47Auto key lock................................. 101Auto time zone........................96, 114Auto. Network selection ..............103Auto. redial......................................32Automobile accessories ............... 152BBand selection...............................104BatteryCharge.......................................... 18Insert ............................................ 17Operating time....................18, 147quality declaration.................... 150Big letters.........................................88Bookmarks (WAP)......................78, 80Browser............................................ 79Buddh. Date .................................... 96Business card................................... 38Busy number................................... 32CCalculator ...................................... 122Calendar......................................... 109CallAccept/end .................................. 33Barring ....................................... 102Charges........................................ 47Conference.................................. 34Divert ........................................... 92End ............................................... 31Hold.............................................. 33Menu............................................ 35Reject ........................................... 33Swap (change)............................ 33Call back........................................... 32Call divert......................................... 92Call transfer..................................... 35Call waiting................................ 34, 92Calling .............................................. 31Calls dialled (call list)...................... 46Calls received (call list)................... 46Camera............................................. 48Car KitAccessories................................ 152Setting ....................................... 105Car kit accessories ........................ 152Care of phone ............................... 136Cell Broadcast (CB)......................... 77Central input ................................... 50Change faceplate............................ 19Change keypad mat ....................... 19Charge rate...................................... 47Charges............................................ 47
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SIX.fm165IndexVAR Language: am; VAR issue date: 040819left page (165) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Charging the battery ...................... 18Clock .................................................96Codes................................................25Colour scheme ................................ 87Conference ......................................34Connection profiles ........................98Contact list.......................................70Control code (DTMF) ...................... 36Countdown....................................124Credit limit ....................................... 47CSD settings.....................................98DData connection.............................. 97Date format .....................................96Default book....................................38Device manag................................126Dialling code....................................31Dialling with number keys............. 31Dictating machine......................... 113Dierkter Anruf..................................35Digital rights management............21Direct reply (SMS)...........................55DisplayIllumination .................................88Language.....................................87Symbols........................................ 15Divert................................................ 92Download......................................... 81Driving safety ................................144DTMF tones (tone sequences).......36Duration/charges............................. 47Dynamic Light ................................. 86EE-mailLists............................................... 66Receive/read ................................ 66Settings........................................ 67Write............................................. 65Emergency number........................ 20Emoty............................................... 80End user license agreement........ 153Extras ..................................... 115, 136FFactory settings .............................. 95Fast access..................................... 107Fast search..................................... 104Fax/data mode ................................ 99Filter ................................................. 93Formatting (SMS text) ................... 51Formatting (telephone memory) .95Forwarding (call) ............................ 35Frequency range........................... 104GGames and applications................. 81GPRS ................................................. 97Groups ............................................. 42HHandset volume.............................. 31Handsfree talking ........................... 33HeadsetAccessories................................ 151Setting ....................................... 105Hide ID ............................................. 92Highlighting mode ......................... 24Hold call..................................... 33, 35Home network.............................. 103IIdentity number (IMEI) .................. 94IMEI number.................................... 94Inbox ................................................ 61Info tones ........................................ 94Information services (CB) .............. 77Infrared ............................................ 97Infrared (IrDA)................................. 97Input language (T9) ....................... 28
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SIX.fmIndex166VAR Language: am; VAR issue date: 040819left page (166) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Inst. Message................................... 69International dialling code............. 32Internet ............................................ 78KKamera ............................................. 48Key tones .........................................94LLanguage ......................................... 87Legal notices......................................4Limit (call time/charge).................. 47Logo.................................................. 87Loss of phone, SIM card...............147MMailbox............................................. 76Maintenance of phone.................136Media Player ..................................128MenuControls........................................ 22My menu.................................... 106Speed dialling..............................25Menu speed dialling .......................24Menu tree ...................................... 158MessageCB..................................................77E-mail ........................................... 65MMS ............................................. 57SMS.........................................51, 53Message memory full.....................56Message type................................... 55Microphone on/off....................35, 49Minute beep ....................................93Missed appointments ...................112Missed calls (call list)...................... 46MMSLists............................................... 62Receive.........................................61Send .............................................60Write............................................. 57Mobile Phone Manager................ 131Muting (microphone) .............. 35, 49My menu ....................................... 106My phone ........................................ 37NNetworkBarring ....................................... 102Connection................................ 103Settings...................................... 103Notes.............................................. 112OOnly ‚...................................101Only this SIM................................. 101Operating times (battery)...... 18, 147Organiser....................................... 109Own (phone) numbers .................. 45Own greeting.................................. 88PPC connection................................. 26Phone (settings) ............................. 94Phone code...................................... 25Phone data .................................... 147Phone identity number (IMEI)....... 94Phone number transmission on/off..92Phone Pilot ...................................... 91PhonebookAdditional books......................... 45call an entry ................................ 44New entry.................................... 43Protected SIM.............................. 45VIP numbers................................ 45Pictures & sounds (SMS)................ 52PINChange ........................................ 25Control......................................... 25Enter ............................................ 20Error ........................................... 135
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SIX.fm167IndexVAR Language: am; VAR issue date: 040819left page (167) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)PIN2 .................................................. 25POP3 ................................................. 68Preferred network......................... 103Preventing accidental activation... 26Product data ..................................147ProfilesMMS ............................................. 63Phone ...........................................83SMS...............................................55WAP .............................................. 79Prompt..............................................32Provider logo ................................... 87PUK, PUK2........................................ 25QQuestions & Answers ...................133RRecords............................................. 46Redial................................................31Reminder..........................................32Remote synchronisation ..............125Ringtone setting..............................89Ringtones.............................42, 89, 91SSafety precautions............................ 6Screensaver ..................................... 87Second phone number................. 103Security ............................................ 25Service centre (SMS)....................... 55Service supplier portal.................... 37Service tones ................................... 94Set time/date ................................... 96Settings ............................................ 83Short message (SMS) .....................51Shown in the display ...................... 15Shut down animation.....................88Siemens City Portal......................... 37Signal strength................................21Silent alert........................................ 89SIM cardClear barring ............................... 26Insert............................................ 17Problems.................................... 134SIM services (optional)......... 119, 120SMSArchive......................................... 54Lists .............................................. 54Profiles......................................... 55Read ............................................. 53Settings........................................ 55Signature..................................... 55T9 input ....................................... 28To group ...................................... 52Write ............................................ 51SMS push......................................... 50SMTP ................................................ 68SOS............................................. 11, 20Sound recorder ............................. 121Special characters........................... 27Speech time (battery) .................. 147Speed dialling keys....................... 108Standard functions......................... 23Standby mode................................. 22Standby time........................... 18, 147Start up animation ......................... 88Stopwatch ..................................... 124Storage location (Phonebook) ...... 43Surf & fun ........................................ 78Swap................................................. 33Switch off phoneAutomatic.................................... 94Manually...................................... 20Switch on phone............................. 20Symbols ........................................... 15Synchronisation............................ 125TT9 text entry.................................... 28Tasks............................................... 111
© Siemens AG 2003, D:\Werkstatt\cx70 am fug\ULYR_SIX.fmIndex168VAR Language: am; VAR issue date: 040819left page (168) of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (25.08.2004, 15:43)Technical data ...............................147Text entryWith T9......................................... 28Without T9................................... 27Text module..................................... 28Time zones.........................20, 96, 114Topics ...............................................85UUnanswered ....................................92Unit converter ...............................123Upper and lowercase letters..........27User group .....................................104VValidity, SMS....................................55Voice message (mailbox)...............76VolumeHandset volume.......................... 31Profiles .........................................83Ringtone ......................................89WWalky Talky ..............................90, 115Wallpaper (display)......................... 87WAP ..................................................78

Navigation menu