BenQ Mobile and OHG M65 GSM/PCS 900/1800/1900 MHz Mobile Phone User Manual M65

BenQ Mobile GmbH & Co. OHG GSM/PCS 900/1800/1900 MHz Mobile Phone M65

User manual

© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65IVZ.fmTable of Contents 1VAR Language: American; VAR issue date: 16-Februar-2004See also Index at the end of this User Guideleft page (1) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Safety precautions ..................... 3Antenna care ........................... 5Phone operation ...................... 5Electronic devices .................... 6Overview of the phone .............. 9Display symbols ....................... 11Getting started ......................... 13Charge battery ....................... 15Switching phone on and off/entering PIN ............................. 16Entering the PIN ..................... 16Emergency number (SOS) ...... 16General instructions ................ 17Standby mode ....................... 17Signal strength ...................... 17Digital Rights Mgmt. (DRM) .... 17Main menu ............................ 17Standard functions .................. 19Highlighting mode ................. 20Menu speed dialling ............... 20Security .................................... 21Codes .................................... 21Preventing accidental activation .............. 22Text entry ................................. 23My phone ................................. 27Calling ...................................... 28Default book ............................ 34Address book ........................... 35New entry .............................. 35Change entry ......................... 37Call entry ................................37Groups ...................................38Phonebook ...............................39New entry ..............................39Call (search for an entry) ........ 40Change entry ......................... 40<Special books> .....................41Call records ............................... 42Time/charges ............................ 43Camera ..................................... 44Photo mode ........................... 44Video mode ............................ 45Main Inbox ............................... 46SMS ........................................... 47Write/send ..............................47Read .......................................49Setting ................................... 51MMS ......................................... 53Create ...................................53Templates ..............................55Send ......................................56Receive ..................................57Read .......................................58Setting ................................... 59E-mail ........................................ 61Write ......................................61Receive/read ........................... 62Setting ................................... 63Voice message/mailbox ............ 64Start menu .............................65Login .....................................66Table of ContentsSee also Index at the end of this User Guide
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65IVZ.fm2 Table of ContentsVAR Language: American; VAR issue date: 16-Februar-2004See also Index at the end of this User Guideleft page (2) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Contact lists ........................... 66Start chat ............................... 68Msg. history ........................... 69Setting ................................... 69CB services ............................... 71Surf & fun ................................. 72Internet ................................ 72Bookmarks ............................. 74Games and Applications ......... 75Download wiz. ....................... 75Setup ........................................ 77Profiles .................................. 77Topics .................................... 79Display ................................... 80Dynamic light ........................ 82Ring tones ............................. 83Call setup ............................... 85Phone setup ........................... 87Clock ..................................... 89Connectivity .......................... 90Security ................................. 93Network ................................ 95Accessories ............................ 97My menu .................................. 98Fast access ............................... 99Organizer ............................... 101Calendar .............................. 101Appointments ...................... 102Tasks ................................... 103Notes ................................... 104Missed appts. ....................... 104Dictation mac ....................... 105Time zones ........................... 106Extras ...................................... 107SIM services (optional) .........107Alarm clock .......................... 107Sound recorder ..................... 108Calc. .....................................109Unit converter ......................109Stopwatch ............................110Countdown .......................... 111Remote synchronisation .......111Media player ........................... 113My stuff .................................. 114Mobile Phone Manager .......... 116Questions & Answers ............. 118Customer Care ........................ 121Care and maintenance ........... 123Product data ...........................124U.S. FDA .................................. 125FCC/Industry Canada Notice ... 131Ten driving safety tips ............132Intellectual property .............. 134Accessories ............................. 135Quality .................................... 137SAR (M65) ............................... 138Menu tree ............................... 140Index ....................................... 146See also Index at the end of this User Guide
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SecurityInfo.fm3Safety precautionsVAR Language: American; VAR issue date: 16-Februar-2004left page (3) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Safety precautionsInformation for parentsPlease read the operating instructions and safety precautions carefully before use.Explain the content and the hazards associated with using the phone to your children.Remember to comply with legal requirements and local restric-tions when using the phone. For example in aeroplanes, petrol stations, hospitals or while driv-ing.Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Keep at least 20 cm/9 inches between phone and pacemaker. When using the mobile phone hold it to the ear which is further away from the pacemaker. For more infor-mation consult your doctor.Small parts such as the SIM card, sealing stop, lens ring and lens cap can be dismantled and swallowed by small children. The phone must therefore be stored out of the reach of small children.The mains voltage specified on the power supply unit (V) must not be exceeded. Otherwise the charging device may be destroyed.The ringtone (S. 83), info tones (S. 87) and handsfree talking are reproduced through the loudspeaker. Do not hold the phone to your ear when it rings or when you have switched on the handsfree function (S. 30). Otherwise you risk serious per-manent damage to your hear-ing.Do not use an optical magnifier to look at the activated infrared interface [Class 1 LED product (classification as per IEC 60825-1)].Only use original Siemens bat-teries (100 % mercury-free) and – charging devices. Otherwise you risk serious damage to health and property. The battery could explode, for instance.You may only open the phone to replace the battery (100 % mer-cury-free) or SIM card. You must not open the battery under any circumstances. All other changes to this device are strictly prohibited and will invali-date the guarantee.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SecurityInfo.fmSafety precautions4VAR Language: American; VAR issue date: 16-Februar-2004left page (4) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)ImportantPlease dispose of unwanted batteries and phones as permit-ted by the laws in your country.The phone may cause interfer-ence in the vicinity of TV sets, radios and PCs.Use only Siemens original accessories. This will avoid potential risks to health or prop-erty and ensure compliance with all relevant regulations.Improper use will invalidate the guarantee!
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SecurityInfo.fm5Safety precautionsVAR Language: American; VAR issue date: 16-Februar-2004left page (5) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Antenna careUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attach-ments could damage the phone and may violate FCC regulations.Phone operationNormal positionHold the phone as you would any other telephone with the antenna pointed up and over your shoulder.Tips on efficient operationFor your phone to operate most efficiently:• Extend your antenna fully (if applicable).• Do not touch the antenna unnec-essarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher pow-er level than otherwise needed.DrivingLaws pertaining to the use of mobile phones while driving vary signifi-cantly from state to state and some-times even from locality to locality within states. For example, some ar-eas may allow persons to use their mobile phones only if they employ a hands-free device, and some areas may prohibit the use of cell phones entirely. Accordingly, Siemens rec-ommends that persons check the laws for the areas in which they drive or will be driving. For areas where the use of mobile phones while driv-ing is permitted, Siemens encourag-es persons to use their phones re-sponsibly and to employ hands-free devices. Also, if using your phone while driving, please:• Give full attention to driving – driving safely is your first responsibility;• Use hands-free operation, if available;• Pull off the road and park before making or answering a call, if driving conditions so require.For vehicles equipped with air bagsAn air bag inflates with great force. DO NOT place objects, including ei-ther installed or portable wireless equipment, in the area over the air bag or in the air bag deployment ar-ea. If in-vehicle wireless equipment ImportantRead this information before using your wireless handheld phone.As this mobile phone is equipped with a fixed (non-retractable) an-tenna, some paragraphs in the text below may not be applicable.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SecurityInfo.fmSafety precautions6VAR Language: American; VAR issue date: 16-Februar-2004left page (6) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)is improperly installed and the air bag inflates, serious injury could re-sult.Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.PacemakersThe Health Industry Manufacturers' Association recommends that a min-imum separation of six inches (6") be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommenda-tions are consistent with the inde-pendent research by and recommen-dations of Wireless Technology Research.Persons with pacemakers• should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;• should not carry the phone in a breast pocket;• should use the ear opposite the pacemaker to minimize the poten-tial for interference;• should turn the phone OFF imme-diately if there is any reason to suspect that interference is taking place.Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider or your hearing aid manu-facturer to discuss alternatives.Other medical devicesIf you use any other personal medi-cal devices, consult the manufactur-ers of your devices to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtain-ing this information.Turn your phone OFF in health care facilities when any regulations post-ed in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehi-cle. You should also consult the manufacturer of any equipment that has been added to your vehicle.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SecurityInfo.fm7Safety precautionsVAR Language: American; VAR issue date: 16-Februar-2004left page (7) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Posted facilitiesTurn your phone OFF in any facility where posted notices so require.AirplanesFCC and Airline Regulations prohibit using your phone while in the air. Turn your phone OFF when request-ed by the airline.Check and comply with the policy of your airline regarding the use of your phone while the airplane is on the ground.Blasting areasTo avoid interfering with blasting op-erations, turn your phone OFF when in a “blasting area” or in areas post-ed: “Turn off two-way radio.” Obey all signs and instructions.Potentially explosive atmospheresTurn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive at-mosphere are often but not always clearly marked. They include: fueling areas such as gasoline stations; be-low deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or parti-cles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SecurityInfo.fmSafety precautions8VAR Language: American; VAR issue date: 16-Februar-2004left page (8) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Emergency calls (SOS)Your wireless phone can be used to make emergency calls. You can make an emergency call from the main display screen. Enter the local emergency number such as 911 and then press the A key.This phone, like any wireless phone, operates using radio signals, wire-less and landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential commu-nications (for example, medical emergencies). Remember – to make or receive any calls, the phone must be switched on and be used in a ser-vice area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network services or phone features are in use. Check with local service providers re-garding their network features. Always make certain that your phone is properly charged before attempting any emergency calls. If you allow your battery to discharge, you will be unable to receive or make calls, including emergency calls. You must then wait a few minutes after the charging begins to place any emergency calls.When making an emergency call, remember to give all of the neces-sary information as accurately as possible. Remember that your wire-less phone might be the only means of communication at the scene of an accident, therefore you should not terminate the call until given permis-sion to do so.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Overview.fm9Overview of the phoneVAR Language: American; VAR issue date: 16-Februar-2004left page (9) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Overview of the phone1 B On/Off/End key• Switched off: press and hold to switch on.• During a conversation or in an appli-cation: press briefly to finish. • In menus: press briefly to go back a level. Hold down to return to standby mode.• In standby mode: hold down to switch off phone. 2A Call keyDial displayed/highlighted phone num-bers/names, take calls. Show last phone numbers dialled in standby mode. 3Display in standby mode4 Soft keysThe current functions of this key are shown in the bottom line of the display as §Text§/symbol (e.g. p).5JoystickC Press the joystick vertically downwards to start an applica-tion or function.In standby mode:C Open main menu.G Open user profiles.H Open Phonebook/Address-book.E Open Main Inbox.D Start the camera.In lists, messages and menus:I Scroll up and down.D Back one level.During a call:I Set volume.E Call options. Z£XService provider01.05.2004 10:10NewMMS Menu
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Overview.fmOverview of the phone10VAR Language: American; VAR issue date: 16-Februar-2004left page (10) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)1 Loudspeaker2LED for dynamic light (p. 82)3 Infrared interface (IrDA)4 * Ringtone•Hold down in standby mode: Switch all audible signals on/off (except alarm). •Hold down on incoming call: Switch off ringtone for this call only.5 # Key lockHold down in standby mode: Switch key lock on/off.6 Connection socketFor charger, headset, flash etc.7 Integrated antennaDo not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality.8 Connection for external antenna9 Camera lensZ£XService provider01.05.2004 10:10NewMMS Menu
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Displaysymbols.fm11Display symbolsVAR Language: American; VAR issue date: 16-Februar-2004left page (11) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Display symbolsDisplay symbols (selection)Z Signal strengthY ChargingW Battery charge level, e.g. 50 %L PhonebookP Call recordsO Surf & fun/Service provider portalQ OrganizerM MessagesR CameraS ExtrasN My stuffT SetupÇ All calls are diverted¿ Signal tone off¾ Short ring (beep) only¼ Ringtone only if the caller is stored in the Phonebook¹ Alarm setÄ Keypad lockedÅ Auto answer feature onT9Abc Text input with T9£ Activated and available¢ Registered¤ Temporarily interrupted± Browser Offline² Browser online³ Browser via GPRS online´ Browser no network ¯ IrDA activated® IrDA transmissionEvents (selection)ã SMS memory fullä MMS memory fullå Phone memory fullÆ No network access Missed callÊ Delete assistant
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Displaysymbols.fmDisplay symbols12VAR Language: American; VAR issue date: 16-Februar-2004left page (12) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Message symbols (selection)p Unreadq Readr Drafts Sentt Unsentz Forwardedy With DRM contents (p. 17){ With attachmentw MMS received x MMS read À Voice mail receivedCamera symbolsØSwitch between photo and videoÙBrightnessÚZoom factorÛWhite balance× Flash connected
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fm13Getting startedVAR Language: American; VAR issue date: 16-Februar-2004left page (13) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Getting startedThe phone must be assembled before you can get started. SIM card and battery• Place the SIM card in front of the slot with the contact surface fac-ing downwards. Then slide the SIM into the holder 1).• Insert the battery sideways into the phone 2, then press it down-wards 3 until it clicks into place. Battery cover• Pull the rubber gasket over the locating lugs 1 on the cover, then push it onto the four studs 2 so that it is firmly positioned on the cover.• Push cover forwards 3 until the locating lugs engage in the open-ings in the phone.Additional informationYour phone's display is supplied with a protective film. Remove this film slowly before assembling the phone. In rare cases, static discharge may cause dis-colouration at the edges of the display. However this will disappear within approx. 10 minutes.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fmGetting started14VAR Language: American; VAR issue date: 16-Februar-2004left page (14) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Metal bracket• Slide the metal bracket open until the openings in the metal bracket and in the cover are directly above each other 1. The hooks 2 must engage in the openings on the front of the phone.• Insert the locking catch into the metal bracket 3 and turn it ninety degrees to the right 4 to join the metal bracket to the phone.Seals• Insert the contacts cover 1 into the connection socket.• The camera lens and antenna socket are protected by the lens cap 2. Using the rubber washer 3 in its place does not offer better protection (p. 123).Additional informationPlease switch off your phone before remov-ing the battery!Only 3 V SIM cards are supported. Please contact your service provider if you have an older SIM card.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fm15Getting startedVAR Language: American; VAR issue date: 16-Februar-2004left page (15) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Charge batteryCharging procedureThe battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours. YDisplay during charging.Charging timeAn empty battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 °C to 45 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded. Operating timesThe operating time depends upon the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time. Avoid placing the phone in the sun or on a heater.Talktime: 100 to 300 minutesStandby time: 60 to 250 hoursCharge icon not visibleIf the battery has been discharged fully, the charge icon is not immedi-ately visible when the power supply is plugged in. It will appear after up to two hours. In this case the battery is fully charged after 3 to 4 hours.Only use the plug-in power supply unit included in delivery!Display while in serviceCharge level display during opera-tion (empty – full):V W X A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly after an uninterrupted charging/dis-charging cycle. You should therefore not remove the battery unnecessarily and where possible not finish the charging process prematurely. Additional informationThe power supply unit heats up when used for long periods. This is normal and not dangerous.If the battery is removed for longer than 30 seconds, the clock must be reset.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fmSwitching phone on and off/entering PIN16VAR Language: American; VAR issue date: 16-Februar-2004left page (16) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Switching phone on and off/entering PINSwitching phone on/offBHold down the On/Off/End key.Entering the PINThe SIM card can be protected with a 4to 8-digit PIN.JEnter the PIN using the number keys. The charac-ters **** appear to ensure nobody can read your PIN on the display. Correct with ]. CConfirm by pressing the joystick. Logging on to the network will take a few seconds.Emergency number (SOS)Only to be used in real emergencies!By pressing the §SOS§ soft key you can make an emergency call on any net-work without a SIM card and without entering a PIN (not available in all countries).Switching your phone on for the first timeTime/dateSet the clock correctly on a one-off basis when getting started.CPress this key, then select §Change§.JFirst enter the date (day/month/year), then the time (24 hours, including seconds).CPress. The time and date are updated.Time zonesSet the time zone for your area.ISelect the city in the desired time zone from the list ...§Set§ ... and set it.Copy SIM addressesThe first time the SIM card is insert-ed, the entries on it can be copied to the Addressbook. Please do not inter-rupt this procedure. During this time, do not accept incoming calls. Follow the instructions in the display.You can also copy data from the SIM card at a later time (p. 40).Additional informationChange PIN.......................................p. 21Clear SIM card barring ......................p. 22
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fm17General instructionsVAR Language: American; VAR issue date: 16-Februar-2004left page (17) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)General instructionsStandby modeThe phone is in standby mode and is ready for use when the name of the service provider appears on the dis-play.BHold down the On/Off/End key to return to standby mode from any situation.Signal strengthZStrong signal.[A weak signal reduces the call quality and may lead to loss of the connection. Change your location.Digital Rights Mgmt. (DRM)Remember that your telephone has Digital Rights Management. The use of downloaded pictures, sounds or applications can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, number of times it can be used etc. (see also p. 76).Main menuThe main menu is displayed graphi-cally with symbols:CCall up from standby mode.F ISelect the application symbols.CStart an application.Main menu options§Options§ Open menu.Different functions are available depending on the context:Large letters Select between two font sizes.Illumination Set display illumination to brighter/darker.Help Display a help text.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fmGeneral instructions18VAR Language: American; VAR issue date: 16-Februar-2004left page (18) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)User guideMenu controlsThe steps needed to reach a function are shown in a condensed form in the user guide, e.g. to display record of missed calls in condensed form:C¢P¢Missed callsThis comprises the following steps:COpen main menu. ¢ Select (highlight) P by moving the joystick upwards, then press verti-cally down on the joystick before using the joystick to highlight Missed calls.CConfirm. The list is opened.SymbolsThe following symbols are used to explain operation:J Enter numbers or letters.B On/Off/End keyA Call key<> Soft keys§Menu§ Displays a soft-key func-tion.The joystick can be moved in 5 directions.C Press the joystick vertically, e.g., to call up the menu.D F E H I G Press the joystick in the directions shown.= Function dependent on service provider. May require special registration.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fm19Standard functionsVAR Language: American; VAR issue date: 16-Februar-2004left page (19) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Standard functionsOption menusFunctions which appear repeatedly in the options menu are listed here.§Options§ Open menu.Edit Open the entry to edit.View Display entry.Delete/Delete all Delete entry/delete all entries after confirmation.New entry Create new entry.Send... Select transmission service and medium for sending or printing.Reply/Reply to all The sender becomes the recipient, "Re:" is placed in front of the subject matter and the received text is transferred into the new message.Save Store entry.Save to 9Save recipients in the cur-rent address directory.Sort Set sort criteria(alphabetical order, type, time).Text input (p. 23)T9 preferred: Activate/deactivate T9 input.Input language: Select language for text.Rename Rename selected entry.Capacity Display memory capacity.Attributes Display properties of the highlighted object.Help Display help text.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fmStandard functions20VAR Language: American; VAR issue date: 16-Februar-2004left page (20) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)Highlighting modeWith some applications (e.g. Phone-book/Addressbook) one or more entries in a list can be highlighted to carry out a function jointly. §Options§ Open menu.Mark Activate highlighting mode. If a non-highlighted entry is selected, this can be highlighted:§Mark§ The current entry is high-lighted.If a highlighted entry is selected, the highlighting can be deleted:§Unmark§ Unhighlight the current entry.Additional highlighting functions:Menu speed diallingAll menu functions are numbered internally. A function may be selected directly by entering these numbers in sequence.E.g., write new SMS (from standby mode):CPress to display the main menu. Then press5for Messages, then 1for Write message, then1for SMS.Mark all Highlight all entries.Deselect all Delete highlighting on all marked entries.Delete marked All selected entries are deleted.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fm21SecurityVAR Language: American; VAR issue date: 16-Februar-2004left page (21) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)SecurityThe phone and SIM card are pro-tected against misuse by several security codes.CodesC¢T¢Security¢Codes¢Select function.PIN controlThe PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not per-mit deactivating the control.§Selection§ Press.JEnter PIN.CConfirm input.§Change§ Press.CConfirm.Change PINYou can change the PIN to any 4 to 8-digit number you find easier to remember.J Enter current PIN.CPress.J, CEnter new PIN.J, CRepeat new PIN.Keep these security codes in a safe place where you can access them again if required.PIN Protects your SIM card (Personal Identification Number).PIN2 This is needed to set the charge detail display and to access additional functions on special SIM cards.PUKPUK2 Key code. Used to unlock SIM cards after the wrong PIN has been entered repeatedly.Phone code Protects your phone. Must be entered at the first security set-ting.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Startup.fmSecurity22VAR Language: American; VAR issue date: 16-Februar-2004left page (22) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:25)C¢T¢Security¢Codes¢Select functionChange PIN2(Display only if PIN2 is available). Proceed as for Change PIN.Chg.phonecode(Change phonecode)You define the phone code (4 to 8 digits) when you call up a phone-code protected function for the first time (e.g. Direct call, p. 32). It is then valid for all phone-code protected functions. Following the third unsuccessful attempt, access to the phone code and the functions that use it is denied. If this occurs, contact the Siemens Service (p. 121).Clear SIM card barringIf the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN) provided by your service provider with the SIM card in accordance with the instruc-tions. If the PUK (MASTER PIN) has been lost, please contact your serv-ice provider.Preventing accidental activationEven if PIN control is deactivated (p. 21) confirmation is required to switch on the phone.This prevents accidental activation of the phone, e.g. when you are car-rying it in a bag or when you are trav-elling in an aircraft.BHold down. CPress. The phone switches on.§Cancel§ Press this key or take no action. The phone does not switch on.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Text.fm23Text entryVAR Language: American; VAR issue date: 16-Februar-2004left page (23) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Text entryText entry without T9Press number key repeatedly until the required letter appears. After a brief interval the cursor will advance. Example:2Press once briefly to write the letter a, twice to type b etc.Hold down to write the number.Ä, ä, 1–9 'Umlauts' and numbers are displayed after the rel-evant letters.]Press briefly to delete the letter before the cursor. Hold down to erase the whole word.FMove the cursor (forwards/back).#Press briefly: Swap between abc, Abc, T9abc, T9Abc, T9ABC, 123. Status shown in top line of dis-play.Hold down: All input-variants are displayed.*Press briefly: Special char-acters are shown.Hold down: Open input menu.0Press once/repeatedly:. , ? ! ’ " 0 + - ( ) @ / : _ Hold down: Writes 0.1Writes blank. Press twice = jumps a line.Special characters* Press briefly. The symbols chart is displayed 1) Line breakI, FNavigate to characters.§Selection§ Confirm.1)¿ ¡ _ ; ! ? , .+-"’:()/*¤¥$£€&#\@[]{}%~<=>|^§ Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Text.fmText entry24VAR Language: American; VAR issue date: 16-Februar-2004left page (24) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Input menuWith text input:*Hold down. The input menu is displayed:Text format (SMS only)Input language Mark Copy/Insert Text entry with T9"T9" deduces the correct word from the individual key entries by making comparisons with an extensive dic-tionary.Activate, deactivate T9§Options§ Open text menu.Text input Select.T9 preferred Select.§Change§ Activate T9.Select input languageSelect the language in which you want to compose your message.§Options§ Open text menu.Text input Select.Input language Select.§Selection§ Confirm, the new language is set. Languages with T9 support are marked with the T9 symbol. Writing with T9Since the display changes as you proceed,it is best if you finish a word without looking at the display.Simply press the keys once only where the relevant letter is located. For "hotel", for example:#Press briefly for T9Abc then4 6 8 3 5 1A blank ends a word.Do not use special characters such as Ä; use standard characters instead e.g. A. T9 will do the rest for you.T9® Text Input is licensed under one or more of the following:U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945 928 and 6,011,554;Canadian Pat. No. 1,331,057;United Kingdom Pat. No. 2238414B;Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383;Euro.Pat. No. 0 842 463 (96927260.8)DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;and additional patents are pending worldwide.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Text.fm25Text entryVAR Language: American; VAR issue date: 16-Februar-2004left page (25) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)T9 word suggestionsIf several options are found in the dictionary for a key sequence (a word), the most probable is dis-played first. If the word you want has not been recognised, the next sug-gestion from T9 may be correct.The word must be shown §highlighted§. Then press^The displayed word is replaced with a different word. If this word is also incorrect, press again.^Repeat until the correct word is displayed.If the word you want is not in the dic-tionary, it can also be written with-out T9.To add a word to the dictionary:§Learn§ Select.The last suggestion is deleted and the word may now be entered with-out T9 support. Press §Save§ to add it automatically to the dictionary.Correct a wordFMove left or right, word by word, until the required word is §highlighted§.^Scroll through the T9 word suggestions again.]Deletes the last character in a word and displays a new possible word.Additional informationWithin a "T9 word", individual letters may not be edited without first removing the T9 status. In most cases it is better to rewrite the complete word.0Set a full stop. The word is concluded if it is followed by a space. Within a word, a full stop represents an apostro-phe or hyphen:e.g. §provider.s§ = provider’s.EMoving the cursor to the right ends the word.#Press briefly: Switch between: abc, Abc, T9abc, T9Abc, 123. Status shown in top line of display.Hold down: All input modes are displayed.*Press briefly: Select special characters (p. 23).Hold down: Opens input menu (p. 24).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Text.fmText entry26VAR Language: American; VAR issue date: 16-Februar-2004left page (26) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Text modulesText modules can be stored in the phone for adding to your messages (SMS, MMS, e-mail). Write text moduleC¢M¢Text modules§Options§ Select New text.JWrite text.§Options§ Open menu and select Save. Accept the specified name or allocate a new one.CSave.Use text moduleJWrite message (SMS, MMS, e-mail).§Options§ Open text menu.§Insert§ Select.I Select Text modules. ISelect text module from the list.§Selection§ Confirm. The text module is displayed.CConfirm. The text module is inserted in the message to the right of the cursor.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MyPhone.fm27My phoneVAR Language: American; VAR issue date: 16-Februar-2004left page (27) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)My phoneThe following shows how to adjust your phone and give it a personal touch.Ringtones (p. 83)Assign individual ringtones to caller groups or special datesPictures (p. 114)Assign individual pictures or photos to your Addressbook entries.Animations (p. 81)Choose a start-up and closing anima-tion as well as a personal greeting.Screensaver (p. 80)Choose an analogue or digital clock, or a personal picture.(Operator) Logo (p. 80)Choose an individual picture (to be displayed in standby mode)Wallpaper (p. 80)Choose your own permanent back-ground image.Topics (p. 79)Load a completely new visual pres-entation onto your phone.Applications (p. 75)Download your own applications from the Internet.Where do I get what?You can purchase additional ring-tones, logos, animations and Java applications from your service pro-vider or directly from Siemens.Service provider portalDepending on your service provider, you will find direct access to his por-tal on your telephone via menu items or bookmarks. Please contact your service provider for more infor-mation on these services.Siemens City PortalYou will find additional ringtones, logos, animations and screensavers as well as more applications, games and services in the Internet at this address:www.siemens-mobile.comOr you can download them directly via WAP:wap.siemens-mobile.comYou will also find a service for saving data here as well as a list of the coun-tries in which these services are available.My menuCreate your own menu (p. 98) with frequently used functions, phone numbers or WAP pages.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phone.fmCalling28VAR Language: American; VAR issue date: 16-Februar-2004left page (28) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)CallingDialling with number keysThe phone must be switched on (standby mode).JEnter the number (always with area/international dialling code). ] A short press clears the last digit, a long press clears the entire phone number.APress the Call key. The dis-played phone number is dialled.End callBPress the End key briefly. Press this key even if the person on the other end of the line has hung up first.Set volumeIRegulate the volume (only possible during a call).If a Car Kit is used, its volume setting will not affect the usual setting on the phone.Redial previous numbersTo redial the phone number last called:APress the Call key twice.To redial other numbers that were dialled previously:APress the Call key once.IPick out the phone number from the list, then to dial press the …A... key.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phone.fm29CallingVAR Language: American; VAR issue date: 16-Februar-2004left page (29) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)If the number is busyIf the called number is busy or can-not be reached because of network problems several options are availa-ble (depending on the service pro-vider). An incoming call or any other use of the phone interrupts these functions.EitherAuto. redial§Auto dial§ The phone number is automatically dialled ten times at increasing time intervals. End with:B End key.OrCall back b§Call back§ Your phone rings when the busy number is free. Press the Call key to dial the number. Reminder§Prompt§ A beep reminds you to redial the displayed phone number after 15 minutes.Additional informationÐStore phone number in the Addressbook/Phonebook.§Handsfr.§ Switch on Handsfree (play-back from loudspeaker).Always switch off "handsfree talking" before holding the phone to your ear! Otherwise, you will damage your hearing!*Press and hold to switch microphone off.International dialling codes0Press and hold until a "+" is displayed.§Country§ Press and select country.Phone number memoYou can enter a phone number during the call. The person to whom you are speaking can hear these entries. When the connec-tion has ended you can save or dial the phone number.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phone.fmCalling30VAR Language: American; VAR issue date: 16-Februar-2004left page (30) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Accept callThe phone must be switched on. An incoming call will interrupt any other use of the phone.CPress.OrAPress.A phone number transmitted by the network plus the corresponding name (possibly with a picture) are displayed if they are stored in the Phonebook/Addressbook (p. 36).Reject call§Reject§ Press.OrB Press briefly. HandsfreeYou can put the phone aside during a call. You can then hear the caller via the loudspeaker. §Handsfr.§ Activate handsfree talk-ing.CSwitch on.IUse the joystick to adjust the volume.§Handsfr.§ Deactivate.Swapping between two callsEstablish a second connectionYou can call another number during a call.§Options§ Open call menu.Hold The current call is put on hold. JNow dial the new phone number or select§Options§, the Phonebook, Addressbook, or phone number.When the new connection is estab-lished:§Toggle§ Swap between calls.Warning!Please make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.Additional information*Press and hold to switch off the ringtone and silent alert.ÂMissed call display.Warning!Always switch off "handsfree talking" before holding the phone to your ear! Otherwise, you will damage your hearing!
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phone.fm31CallingVAR Language: American; VAR issue date: 16-Februar-2004left page (31) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Incoming calls during a callYou may need to register for this service with your service provider and set your phone accordingly (p. 85). During a call, you may be advised that there is another call waiting. You will hear a special tone during the call. You have the follow-ing options:•Accept the waiting call in addition to the first§Toggle§ Accept the waiting call, putting the current call on hold to do so. Always proceed as above to swap between the two calls.•Reject the waiting call §Reject§ Press. Or§Divert§ The waiting call is diverted, for example, to the mailbox.• Accept the waiting call and end the current callBEnd the current call.CAccept new call.End call(s)BPress the End key. After the Return to held call? display, you have the following selection:§Yes§ You accept the call on hold.§No§ You end the second call too.Conference Call up to 5 parties one by one and link them together in a multiparty call. Some of the functions described may not be supported by your serv-ice provider or may have to be ena-bled specially. A connection has already been established: §Options§ Open menu and select Hold. The current connec-tion is maintained.JNow dial a new number. When the new connec-tion is established ...§Options§ ... open menu and select Conference. The held call is joined.Repeat procedure until all partici-pants are linked together (up to 5participants).EndBAll calls in the multiparty conversation are ended when the End key is pressed.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phone.fmCalling32VAR Language: American; VAR issue date: 16-Februar-2004left page (32) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Call optionsThe following functions are only available during a call:§Options§ Open menu.Direct callIf this is active, only one number can be dialled.Switch onC¢T¢Security¢Direct callCConfirm selection.JEnter phone code.When first prompted you define and enter the phone code (4–8 digits).CConfirm selection.Please do not forget this code (p. 21)! Ï/JSelect phone number from the Phonebook/Addressbook or enter it. CConfirm.Apply§Carola§ To dial the phone number (e.g. Carol’s phone number), press and hold the right soft key. Switch off#Press and hold down.JEnter phone code.CConfirm input.Hold Hold current call.Microphone on If switched off, the person on the other end of the line cannot hear you (muting). Also: * Hold downHandsfree Playback from loud-speaker. Volume Adjust handset volume.Default book Phonebook/Addressbook.Conference (p. 31)Time/charges Display talktime that has elapsed so far and (if set) charges incurred during the connection.Send DTMF Enter tone sequences (numbers) for remote inquiries to an answering machine.Call transfer= Connect the original call to a second call. For you, both calls are now ended.Main menu Access to the main menu.Call status List all held and active calls (e.g. participants in a con-ference).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phone.fm33CallingVAR Language: American; VAR issue date: 16-Februar-2004left page (33) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Tone sequences (DTMF)You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists. These entries are transmitted directly as DTMFcodes (control codes).§Options§ Open menu.Send DTMFSelect.Using the Phonebook/Address-bookStore phone numbers and control codes (DTMF codes) in the Phone-book/Addressbook in the same way as a normal entry.JEnter phone number.0Press until a "+" appears in the display (wait for the connection to be estab-lished).JEnter DTMF codes (numbers).0If necessary, wait again for three seconds at a time for the receiver to process the entries safely.JEnter a name.§Save§ Store entry.You may also store just the DTMF codes (numbers) and then send them during the call.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Pref_Book.fmDefault book34VAR Language: American; VAR issue date: 16-Februar-2004left page (34) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Default bookC¢L¢Select function.Show entriesThe entries in the standard directory (Addressbook or Phonebook) are shown.J/ISelect a name with the first letter and/or scroll. New entryCreate new entry.Address book (see also p. 35)Phonebook (see also p. 39)Default bookYou can set which directory you pre-fer to use. The selected default book is opened in standby mode with the joystick.HOpen Phonebook or AddressbookAddress bookIn the Addressbook, a lot of data can be recorded for each entry and addi-tional functions (such as pictures, birthdays, chat room) can be used.PhonebookThe Phonebook is located on the SIM card. Only one phone number can be entered per entry. The Phonebook on the SIM card can easily be trans-ferred into a different phone.Business cardCreate your own business card to send to a different GSM-phone. If no business card has been created yet, you will be asked for your input.HMove from field to field to enter your details. §Save§ Press.GroupsSee p. 38.<Info numbers>See p. 41.Additional informationThe content of the business card and the Addressbook entries correspond to inter-national standards (vCard).ÏCopy numbers from Address-book/Phonebook.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Adressbook.fm35Address bookVAR Language: American; VAR issue date: 16-Februar-2004left page (35) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Address bookThe Addressbook can store up to 1000 entries, each with a variety of telephone and fax numbers as well as additional address details. These entries are managed in the phone memory separately from those in the Phonebook. However, you can exchange data between the Address-book and the Phonebook on the SIM card.New entryThe Addressbook is set as standard:HOpen Addressbook (in standby mode).CDisplay input fields.ISelect required input fields.JFill in input fields. The maximum number of characters available is shown at the top of the display. At least one name must be entered. Always enter phone number with dial-ling code.Possible input fieldsAdditional informationGroup: Assignment to a group (p. 38).Address: Extension to enter the complete address:Street:, ZIP:, City:, Country:Com. servicesInformation if the entry is being used as a chat room contact (p. 65):Nickname:, WV user ID:, ICQ number:, AIM screen name:Last name: URL:First name: Inst. Msg. >> Phone number: Group:Phone/office: Company:Phone/cell: Address: >> Fax: Birthday: >> Fax #2: Picture:E-mail address:Email #2: All fields
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Adressbook.fmAddress book36VAR Language: American; VAR issue date: 16-Februar-2004left page (36) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Birthday: After activation, the date of birth is entered. Reminder: The telephone reminds you one day before the birthday.Picture: Assign a picture to the entry. This is displayed when you are are called by a corresponding phone number.All fields/Reduced fieldsDisplays the number of input fields.§Save§ Save the entry.Display/find entryHOpen Addressbook (in standby mode).J/ISelect required entry.CDisplay.Display options§Options§ The options menu only ever offers the functions for the currently selected input field. Additional informationÎTemporary switch to Phone-book.SynchronisationWith the mobile phone manager (p. 116), you can synchronise your Addressbook with Outlook® and other Siemens telephones. Using Remote sync. you can synchronise your mobile with an organiser stored on the Internet (see also p. 111).Move to ... Assign current entry or highlighted entries to a group.View Display an assigned pic-ture.Copy to SIM Copy name and one phone number to the SIM card (Phonebook).New SMS, New MMS, New e-mailCreate a message with the selected entry.Browser Start WAP browser and visit URL.Inst. Msg. Start a dialogue with the selected entry (p. 65).(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Adressbook.fm37Address bookVAR Language: American; VAR issue date: 16-Februar-2004left page (37) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Change entryHOpen Addressbook (in standby mode).J/ISelect required entry.§Edit§ Press.ISelect input field.§Edit§ Open entry if necessary. JMake changes.§Save§ Save.Call entryHOpen Addressbook (in standby mode).J/ISelect a name with the first letter and/or scroll. AThe number is dialled.If there are several numbers in the address book entry, these are offered for selection.ISelect phone number.AThe number is dialled.Addressbook optionsDepending on the actual situation, different functions will be offered. These functions can be applied to the entry currently selected as well as to multiple selected entries:§Options§ Open menu. Move to ... Move current entry or high-lighted entries to a group.Copy to SIM Copy name and phone number to the SIM card (Phonebook).Filter Only those entries which match the filter criteria are displayed.Import Set up readiness to receive for a Phonebook entry via IrDA (p. 90) or SMS (p. 47).Sort Specify sorting criteria for output of the Addressbook entries.Search Enter search term.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Adressbook.fmAddress book38VAR Language: American; VAR issue date: 16-Februar-2004left page (38) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)GroupsNine groups are specified in your phone to enable you to arrange your Addressbook entries clearly. You can rename seven groups.HOpen Addressbook (in standby mode).<Groups> Select (the number of entries is listed behind the group name). ISelect group. Groups menu§Options§ Open menu.Ringtone for groupAssign a ringtone to a group that plays when one of its members calls you. C¢T¢Ring tones¢Group callsISelect group.CConfirm. If a ringtone has already been set, it will be played. Otherwise, the ringtone list will be dis-played and you can select one.I If necessary, select a ringtone.CConfirm. Rename group Change name of group.Group symbol Assign a symbol to a group. The symbol will then appear in the display when one of the group members calls.Additional informationNo group: Contains all Addressbook entries that do not belong to a group (name cannot be changed).Received: Contains Addressbook entries received by IrDA (p. 90) or SMS (p. 47) (name cannot be changed).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phonebook.fm39PhonebookVAR Language: American; VAR issue date: 16-Februar-2004left page (39) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)PhonebookEntries in the Phonebook (on the SIM card) are managed separately from those in the Addressbook. You can, however, exchange data between the Phonebook and the Address-book.New entryIf the Phonebook has been selected as standard:HOpen Phonebook (in standby mode).H Select <New entry>.CDisplay input fields.ISelect input field.JFill in input fields. The maximum number of characters available is shown at the top of the display. Phone number:Always enter phone number with dialling code. An entry is not saved if it does not have a phone number.Name: Enter first and/or last names.Group:Default No groupImportant phone numbers may be combined in a group (VIP).Location: Default SIMSpecial SIM cards can save phone numbers in a protected area (SIM pro-tected) (PIN2 required).Record #: Each entry is automatically assigned a record number. You can also dial using the record number. §Save§ Press to store the new entry.Additional informationÎTemporary switch to Address book.§Country§ International dialling code ....p. 29Functions concerning Text entry .......p. 23
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phonebook.fmPhonebook40VAR Language: American; VAR issue date: 16-Februar-2004left page (40) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Call (search for an entry)HOpen Phonebook.J/ISelect a name with the first letter and/or scroll.APhone number is dialled.Call using record no.A record number is automatically assigned to every new entry in Phonebook.JEnter record number.#Press.APress.Change entryHOpen phonebook.J/ISelect entry in Phone-book.§Edit§ Press.ISelect desired input field.JMake changes.§Save§ Press.Phonebook optionsThe following functions are availa-ble, depending on the current situa-tion. §Options§ Open menu.Copy to 9Copy all highlighted entries to the Address-book.Copy all to 9Copy all entries to the Addressbook.Delete all The entire Phonebook is deleted (PIN-pro-tected).Import Set up readiness to receive for a Phone-book entry via IrDA (p. 90) or SMS (p. 47).(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Phonebook.fm41PhonebookVAR Language: American; VAR issue date: 16-Februar-2004left page (41) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)<Special books>HOpen Phonebook (in standby mode).<Special books>Select.<Own numbers>Enter "own" phone numbers in Phonebook (e.g., fax) for your infor-mation. These numbers can be changed, deleted and also sent as an SMS message.<VIP numbers>Display the phone numbers saved in the VIP group.<SIM phonebook> Entries stored in the Phonebook on the SIM card can also be used on other GSM phones.<Protected SIM> bOn special SIM cards, phone num-bers can be stored in a protected location. PIN2 is required for editing. <Service nos.>/<Info numbers>There might be phone numbers saved in your Phonebook that have been provided by your service pro-vider. They may be used to call local or national information services or to use services offered by your service provider.Completing phone numbers in the PhonebookDigits may be replaced by a "?" when phone numbers are entered in the Phone-book:*Press and hold down.These wildcards must be replaced with numbers before dialling (e.g., with the extension numbers in a phone system). To make a call, select the phone number from the Phonebook.APress.JReplace "?" with numbers.AThe phone number is dialled.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Records.fmCall records42VAR Language: American; VAR issue date: 16-Februar-2004left page (42) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Call recordsThe phone number of a caller is dis-played if• the caller has switched off the Hide ID function and• the network supports the "Caller Identity" function.Alternatively, a caller’s name is dis-played if it is stored in the Phone-book/Addressbook.Your phone stores the phone num-bers of calls for convenient redial-ling. C¢P ISelect record.COpen call record.ISelect phone number.ADial phone number.Or§View§ Display information on the phone number.Up to 500 entries are stored in the records:Missed calls bThe phone numbers of calls that you have received but not answered are stored for call back purposes.ÂIcon for missed call (in standby mode). Press the soft key beneath the sym-bol to bring up the Main Inbox (p. 46). Calls receivedAccepted calls are listed. Calls dialedAccess to the last numbers you have dialled.AFast access in standby mode.Delete recordsThe records are deleted. Records menuThe records menu can be called up if an entry is highlighted.§Options§ Open menu.Copy to 9/Copy to SIM Copy the currently selected phone number into the preferred direc-tory.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_TimeCharge.fm43Time/chargesVAR Language: American; VAR issue date: 16-Februar-2004left page (43) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Time/chargesYou can display the charges and duration during a call. You can set a unit limitation for outgoing calls. C¢P¢Time/chargesSelectLast call:Incoming calls:Outgoing calls:Outgoing SMS:Outgoing MMS:GPRS data flow:All calls:Remaining units:IScroll through the display.§Reset§ Reset the selected setting.Charge settingCOpen menu.Charge/Unit (PIN2 prompt)Enter the currency as well as the charge per unit and time.Account limit (PIN2 prompt)Special SIM cards allow you or the service provider to define a credit limit or a period after which the phone is barred for outgoing calls.§Edit§ Press.JEnter PIN2.Account limitSwitch on.JEnter number of units.§OK§ Confirm.Then confirm the credit or reset the counter. The status display for pre-paid cards may vary depending on the service provider.Auto displayCall duration and charges are displayed automatically.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Camera.fmCamera44VAR Language: American; VAR issue date: 16-Februar-2004left page (44) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)CameraYou can view photos/videos recorded on the integrated camera immediately and• use the photo as a background image, logo, a switch on/off ani-mation or a screensaver.• send the photo/video via MMS or e-mail.Switch onC¢R OrDStart camera in standby mode.ØSwitches between frame and videorecording.The current (preview) image is dis-played. You will see the following in the first line from left to right:ÙBrightnessÚZoom factorÛWhite balance×Flash connected.In the top right-hand corner of the preview image, the number of pho-tos which can still be taken in the selected resolution is displayed. This number varies considerably accord-ing to the subject matter (storage space required). You will find a refer-ence to the selected resolution beneath the preview image. In video mode, the recording time already used and the maximum recording time still available is shown here.Photo modeCTakes a photo.CDisplays the preview image of the next photo.The photo is saved with a name, the date and the time. To enter the name, see Setup in the options menu.Settings prior to taking a photo:FSets the brightness.ISets the zoom factor.è CameraÙÛ ×PremiumØOptions24
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Camera.fm45CameraVAR Language: American; VAR issue date: 16-Februar-2004left page (45) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Image resolutionThe image resolution quality can be adjusted regardless of the preview image resolution. The resolution may decrease depend-ing on the selected digital zoom.Video modeThe video mode resolution is the same as the preview image resolu-tion.CStart the video recording.CEnd video recording.A red dot appears in the top right of the display while the video recording is active.§Play§ Plays the video recording.Flash (Accessories)If the flash is active, this is shown by a symbol in the display. The flash is constantly charged while connected to the telephone and switched on. This reduces the stand-by time.×This symbol appears when the flash is being charged.For settings, see options menu.Camera optionsThe following functions are availa-ble, depending on the current situa-tion.§Options§ Open menu.Premium: 640 × 480 (VGA)High: 320 × 240 (QVGA)Medium: 160 × 120 (QQVGA)Background: 132 × 176Settings • Name for recordings• Image resolution.• Colour mode: normal, sepia, grey tintsPictures Displays list of photos.Other videos Displays list of videos.Microphone on Switches the microphone on or off. Use flash Choose between: Automatic, Off, Red-eye Auto-timer The photo is taken approx. 15 seconds after trigger-ing. For the last 5 seconds, you will hear a signal tone each second.White balance Choose between: Automatic, Indoor, Out-door(For standard functions see p. 19)Additional informationÊInsufficient memory available. Start the delete assistant to delete specific data (p. 87).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_UnifiedInbox.fmMain Inbox46VAR Language: American; VAR issue date: 16-Februar-2004left page (46) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Main InboxThe inbox folder offers immediate access to the messages currently received. This means that you no longer have to look through all inbox folders for the various message types. The entries are marked with a symbol to indicate their type and sta-tus. You will find an overview of the symbols on p. 11.To call up the inbox folder, e.g. if a new SMS has been received:çPress the soft key beneath the symbol,orEin standby mode.In the inbox folder you will find the following message types:SMS, MMS, E-mail System messagesNotification about MMS, Missed alarm, Missed appts., Missed calls, WAP push, Voice message Data objectsRing tones, Pictures and Video, calen-dar entries, Notes and Business card.CWhen you open an entry, the relevant application also starts. After a set period, entries which have already been read and opened are only displayed in the message-related incoming lists (see Setup in the optionsmenu).Main Inbox options§Options§ Open menu.Receive e-mail Select set access and transfer all e-mails from the server to the phone.Setup If entries have been read, remove them from the Main Inbox:Daily, Never, ImmediatelyIf Daily has been selected, specify the time.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fm47SMSVAR Language: American; VAR issue date: 16-Februar-2004left page (47) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)SMSYou can transmit and receive very long messages (up to 760 charac-ters). They are automatically com-posed of several "normal" SMS mes-sages (note higher charges).Additionally you can insert pictures and sounds in an SMS.Write/sendC¢M¢Write message¢SMSJEnter text. You will find information on writing texts with and without T9 in the chapter "Text entry" (p. 23). The following is displayed in the display line: Text entry status, number of SMSs required, number of characters still available.AStart sending procedure.Ï/JSelect phone number from the Phonebook/Addressbook or enter it.§Group§ If necessary, select a group.CConfirm. The SMS is trans-mitted to the service cen-tre to be sent and saved in the Sent items list.Text options§Options§ Open menu..Save Save composed text in draft list.Pic-ture&sound Add pictures, animations and sounds into message (see following text).Text modules Add text modules (p. 26). Format Font size: Small font, Medium font, Large fontUnderlineAlignment: Default alignm., Left, Center, RightMark (highlight text with the joystick)Delete text Delete the whole text.Send with... Select SMS profile so the SMS can be sent.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fmSMS48VAR Language: American; VAR issue date: 16-Februar-2004left page (48) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Picture&soundSend pictures and sounds with or without accompanying text. Remember that these may be pro-tected (DRM, p. 17).With the text input field open:§Options§ Open menu.I Select Picture&sound. The menu contains:Def animations Def. sounds Own anim. Own pictures Own sounds ISelect list.CConfirm. The first entry in the selected list is dis-played.IScroll to entry required.For Def animations/Def. sounds:CThe selection is added to the SMS.For Own anim./Own pictures/Own sounds:CThe selection is dis-played/played back.CThe selection is added to the SMS.The pictures which have been added are displayed. Sounds are displayed in the form of "wildcards".SMS to groupYou can send an SMS message to a recipient group.§Options§ Open menu.Send Select.§Group§ The list of groups is dis-played.ISelect group.COpen group and highlight all/individual entries.CA safety inquiry is made and then sending is started.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fm49SMSVAR Language: American; VAR issue date: 16-Februar-2004left page (49) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)ReadpArrival of a new SMS announced in the display. Use the soft key beneath to open the Main Inbox (p. 46).CReading the SMS.IScroll through message line by line.ReplyYou can answer the SMS immediately. The newly added text is placed above the received text.Reply optionsCOpen reply menu.Read options§Options§ Open reply menu.çSMS10.05.2004 19:42+ 12398765431SMS text. . .Reply OptionsWrite message Create a new reply text.Edit Edit received SMS or add new text.Answer is YES Add Answer is YES to the SMS.Answer is NO Add Answer is NO to the SMS.Call back, Delay, Thanks Add a standard text as a reply to the SMS.Reply See “Reply options” above.Picture&sound Save picture/sound contained in the SMS.Zoom in Enlarge/reduce text display. Archive Move SMS message to archive.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fmSMS50VAR Language: American; VAR issue date: 16-Februar-2004left page (50) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)ListsAll SMS messages are archived in dif-ferent folders, according to their sta-tus. (For overview of message sym-bols, see p. 11):InboxC¢M¢Inbox¢SMSThe list of received SMS messages is displayed.DraftC¢M¢Draft¢SMSThe list of not yet transmitted SMS messages is displayed.UnsentC¢M¢Unsent¢SMSThe list of concatenated SMS mes-sages not yet sent are displayed. Transmission can be restarted.SentC¢M¢Sent¢SMSThe list of sent SMS messages is dis-played.SMS archiveC¢M¢SMS archiveThe list of SMS messages stored in the phone is displayed. List optionsDifferent functions are offered depending on the list.§Options§ Open menu.Send Send or forward entry.Send with... Select an SMS profile for transmission.Archive Move SMS message to archive.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fm51SMSVAR Language: American; VAR issue date: 16-Februar-2004left page (51) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)SettingSMS signatureC¢M¢Msg settings¢SMS¢SMS signatureYou can enter a “signature” with up to 16 characters. This signature will then be attached to each SMS except for a §Reply§ and when changes are made to an existing SMS.SMS profilesC¢M¢Msg settings¢SMS¢SMS profilesUp to 5 SMS profiles can be set. The transmission characteristics of an SMS are defined in these. The pre-setting depends on the SIM card inserted.Activate profileISelect profile.CActivate.Set profileISelect profile.§Edit§ Open to edit the profile.Service centre Enter the phone numbers for the service centre as provided by the service provider.Recipient Enter a standard recipient for the profile.Message type •Manual: Inquiry for all mes-sages.•Standard text: Normal SMS message.•Fax: Transmission via SMS.•E-mail: Transmission via SMS.•New: You may need to obtain the required code number from your service provider.Validity period Period in which the service centre is to try to deliver the message:Manual, 1 hour, 3 hours,6 hours, 1 day, 1 week,Maximum* * Maximum period that the service provider permits.Status report = Receive confirmation of suc-cessful/failed transmission of a message. This service may be subject to a charge.Direct reply = If activated, the reply to your SMS message is handled via your service centre (for infor-mation, please contact your service provider).SMS via GPRS = Send SMS automatically via GPRS (p. 90).Save aft. send Sent SMS messages are saved in the Sent items list.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SMS.fmSMS52VAR Language: American; VAR issue date: 16-Februar-2004left page (52) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)More information on SMSSMS status reportIf the message cannot be transmit-ted to the service centre you are offered the chance to repeat the transmission. If this also fails, con-tact your service provider. The Mes-sage sent. message only indicates transmission to the service centre. This will then attempt to relay the message within a certain period.See also Validity period (p. 51).Phone number in SMSPhone numbers displayed in the §highlighted§ text can be dialled (A) or saved in the Phonebook/Address-book.Downloading ringtones and logosYou can receive links for download-ing ringtones, logos, screensavers, animations and information about applications with an SMS. Please highlight this link and, by pressing the Call key A, start the download. Please check that the dial-in access (p. 91) is configured.Remember that these may be pro-tected (DRM, p. 17).ã SIM memory fullIf the message icon flashes the SIM memory is full. No more SMS mes-sages can be received. Messages must be deleted or archived.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fm53MMSVAR Language: American; VAR issue date: 16-Februar-2004left page (53) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)MMSThe Multimedia Messaging Service enables you to send texts, pictures/videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show".Depending on your phone's settings, you will receive either the complete message automatically or notifica-tion that an MMS has been saved in the network, giving sender and size details. You may then download it to your phone to read it. Ask your service provider whether this service is available. You may need to register for this service sepa-rately.Create C¢M¢Write message¢MMSAn MMS consists of the address header and the content. An MMS may consists of a series of pages. Each page may contain a text, a picture/video and a sound. Remember that pictures and sounds may be protected (DRM, p. 17).Write texts with the help of T9 (p. 23).Pictures and videos can be recorded with the integrated camera and/or loaded from My stuff (p. 114).Sounds can be recorded with the sound recorder and/or loaded from My stuff (p. 114). First select an object for processing to be added to the first page of the MMS:Pictures/videosLimits on picture size can be set in the user settings.<Picture> Select.CDisplay picture/video functions:Insert imageOpen list to select a picture.Insert videoOpen list to select a video.CameraActivate the camera to take a photo or record a video for the MMS (p. 44). RAlso possible.OpenDisplay picture.DeleteDelete inserted picture/video.SaveSave picture/video for use later on.PropertiesDisplay properties, including any user right restrictions (p. 17).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fmMMS54VAR Language: American; VAR issue date: 16-Februar-2004left page (54) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Sounds<Sound> Select. CDisplay sound functions:Insert soundOpen list to select a sound.RecordActivate sound recording to record sounds (p. 108).mAlso possible.OpenPlayback the sound.DeleteDelete inserted sound.SaveSave sound to use later on.PropertiesDisplay properties, including any user right restrictions (p. 17).Text<Text> Select and write the text.CThe text functions are dis-played (see also p. 23):Insert fromChoose any of the following for insertion: Text modules, Bookmark, Insert from d Delete textDelete text on current page.SaveSave text on the page as text mod-ule.Text inputT9 settings:T9 preferred, Input languageMarkText processing together with Copy and Insert.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fm55MMSVAR Language: American; VAR issue date: 16-Februar-2004left page (55) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Generation options§Options§ Open menu. lawTemplatesC¢M¢MMS templateMMS templates are saved MMSs with no address. They can be sent as new MMSs or used as part of a new MMS. A maximum of 10 templates can be saved.Create templates by writing a new MMS or using an MMS which you have already received. §Options§ Open menu and select Save as templ.Send MMS Send MMS.Play Play entire MMS on the dis-play.Picture... See p. 53.Sound... See p. 54.Text... See p. 54.Page Add page: Insert new page behind current one.Delete Page: Delete cur-rent page.Page list: Display available pages.Timing: Set the time sequence for the MMS presentation:•Page duration:Automatic or Manual •Show page:Only if Manual is set in front of it. Enter the lifespan of a page.Properties Enter sending parameters (see next chapter).Save as templ. Save created MMS as a template. See also below.Layout Select one of four possible layouts:Text above, beneath, beside (on left or right of) picture.Colors Select the colours for:•Message •Page •Bitmap •Text backgrd. •Text color (For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fmMMS56VAR Language: American; VAR issue date: 16-Februar-2004left page (56) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)SendThe page(s) of the new MMS is(are) already created and the MMS is dis-played.AOpen address entry.Subject: Enter a brief description.Send to: Enter one/several phone number(s)/e-mail address(es). Ï Insert from Address-book.Size: Display the size of the current MMS.AStart sending procedure. CThe MMS is sent after con-firmation.Expanded address fieldsIScroll downwards.More: Provide additional address fields.Cc: Address(es) of copy recip-ient(s).Bcc: Address(es) of copy recip-ient(s) who are not visible to the other recipients.Attachments:Insert attachments.Date: Creation date.Use delivery time:Use specified send time. If §Yes§:Delivery date:Send date.Delivery time:Send time.Icons for status informationÞPriority.ßSend report.áContains DRM (p. 17). ç MMSSubject:Greetings from MunichSend to:+1234567654321 |Size:85 KBÞßá ]Options
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fm57MMSVAR Language: American; VAR issue date: 16-Februar-2004left page (57) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Sending options§Options§ Open menu.ReceiveDepending on the setting (p. 59), an MMS can be received in two ways:Complete transmissionThe complete MMS is sent to your phone. This can take quite a long time if the MMS is large.çShown in the display.<Start reception. The MMS is sent.Prior notificationYou are notified that an MMS is wait-ing to be received.wShown in the display.<Read the notification. Dis-play the size of the MMS.§Accept§ The complete MMS is sent.§OK§ Display in Main Inbox.Send MMS Send MMS.Play Play entire MMS on the dis-play.Edit Display object selection to change an object.Add addressee Add recipient from the cur-rent address directory.Del. addressee Delete individual recipient.Add attch-mnt. Add attachment:•File •Business card •Appointment Page list Display MMS pages for viewing and/or changing.Save as templ. Save created MMS as a template.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fmMMS58VAR Language: American; VAR issue date: 16-Februar-2004left page (58) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)ReadAn MMS has been received in full.ISelect the MMS.CStart automatic playing of the MMS.Key functions for playback:ETo the next page.DPress briefly once to return to the start of the current page; press briefly twice to return to the start of the previous page.ISet volume.C/BEnd.The message details are displayed when the MMS is complete.Subject: Description of the MMS.From: Information about the sender.Size: Size of the MMS.Expanded address fieldsIScroll downwards.More: Additional input fields.Cc: Copy recipient.Attachments:Save attachments.Date: Date received.Symbols for status information (see p. 56)ListsAll MMS messages are in four differ-ent lists (for overview of message icons, see p. 11):InboxC¢M¢Inbox¢MMSThe list of MMS messages and notifi-cations received is displayed. To receive an MMS subsequently, open notification and press §Accept§. DraftC¢M¢Draft¢MMSThe list of stored drafts is displayed.UnsentC¢M¢Unsent¢MMSThe list of the MMS messages not yet transmitted is displayed.SentC¢M¢Sent¢MMSThe list of sent MMS messages is dis-played.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fm59MMSVAR Language: American; VAR issue date: 16-Februar-2004left page (59) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)List optionsDifferent functions are offered depending on the list/situation.§Options§ Open menu.SettingC¢M¢Msg settings¢MMS¢Select function.MMS profile:Six MMS profiles can be set (5 in the telephone memory, one on the SIM card). The send properties can be specified in them. In most cases, the setting are preloaded. If necessary, check with your service provider for details.Activate profileISelect profile.§Options§ Open menu and select Activate.Set profileISelect profile.§Options§ Open menu and select Change sett.Play Play MMS on the dis-play.Edit Display MMS for processing.View Display MMS for view-ing only (write-pro-tected).Send MMS Send MMS.Reply MMS Reply to MMS immedi-ately.Forward MMS Enter recipient(s) for forwarding.Properties Display message parameters.Receiv.all MMS Send all new MMS immediately.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MMS.fmMMS60VAR Language: American; VAR issue date: 16-Februar-2004left page (60) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)User settingsSet the MMS dispatch to suit your requirements: Delivery report: Request delivery confirma-tion for sent messages.Read reply: Request confirmation that the MMS has been read.Default priority: Send priority: Normal, High, Low Validity: Select the period in which the service centre is to try to deliver the message:Manual, 1 hour, 3 hours,6 hours, 1 day, 1 week, Maximum* * Maximum period that the service provider permits.Earliest deliv. time: Transmission from the service centre to the recipient:Immediate, Tomorrow Default duration: Length of display for an MMS page (standard requirement).Retrieval: Receive complete MMS or only notification of arrival.Immediate Receive complete MMS immediately.Auto.homenet Receive complete MMS immediately in home net-workManual Only receive the notifica-tion.Spam filter: Settings for receipt of pro-motional MMS.Size indica-tion: = Set max. message size and message handling.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Email.fm61E-mailVAR Language: American; VAR issue date: 16-Februar-2004left page (61) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)E-mailYour phone has an e-mail program (client). You can use it to create and receive e-mails.WriteC¢M¢Write message¢E-mailEnter the address data for the e-mail:Send to: Enter one or more e-mail address(es). Ï Insert them from the Addressbook/Phonebook.Subject: Enter e-mail heading (up to 255 characters).Content Enter text. To send:§Options§ Open menu.Send e-mailSelect.OrAll fields Open additional input fields. Cc: Address(es) of copy recipient(s).Bcc: Address(es) of copy recip-ient(s) who are not visible to the other recipients.Attachments:Add attachments such as pictures and sounds.OptionsDifferent functions are offered depending on the position of the cursor.§Options§ Open menu.Send e-mail Send e-mail.Send later Transfer e-mail into the Unsent list.Save Save e-mail in the Draft list.Add addressee Add recipient from the current address direc-tory.Delete line Delete current line.Insert from Text modules Bookmark Ï Insert from the Addressbook/Phone-book.Add attchmnt. My stuff Open to make a selection. Remember that pictures and sounds may be pro-tected (DRM, p. 17).Delete text Delete the whole text.Text input •T9 preferred •Input language
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Email.fmE-mail62VAR Language: American; VAR issue date: 16-Februar-2004left page (62) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Receive/readC¢M¢Inbox¢Select function.Before an e-mail can be read, it must be retrieved from the server. You have two options:Retrieve emailOnly the message header in Main Inbox (p. 46) is sent. You can then decide if you also want to receive the contents:§Options§ Open menu and select Ret. contentor want to delete the e-mail on the server:§Options§ Open menu and select Del. on server.Send/receiveThe set access is selected and all e-mails transferred into the Main Inbox (p. 46). At the same time, com-pleted e-mails are transferred from the Unsent list. AttachmentsContains the e-mail attachments; these can be saved in My stuff (p. 114).§Options§ Open menu and select Save attach. ListsAll e-mails are saved in different lists depending on their status (for over-view of message icons, see p. 11):InboxC¢M¢Inbox¢E-mailThe list of received e-mails is dis-played. DraftC¢M¢Draft¢E-mailThe list of e-mails not yet transmit-ted is displayed.UnsentC¢M¢Unsent¢E-mailThe list of e-mails not yet transmit-ted is displayed. SentC¢M¢Sent¢E-mailThe list of transmitted e-mails is displayed.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Email.fm63E-mailVAR Language: American; VAR issue date: 16-Februar-2004left page (63) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)List optionsDifferent functions are offered depending on the list.§Options§ Open menu.SettingC¢M¢Msg settings¢E-mailBefore using this service, you must set the server access and your e-mail options. Most of this data has already been entered. If not, you can obtain this from your service pro-vider. See also on the Internet at:www.siemens-mobile.com/m65AccountsISelect account.COpen.Activate accessI Select access.CActivate access.Set accessI Select access or <Empty>.§Edit§ Start the processing and fill in the data fields as specified by the service provider.General sett.Enter an e-mail address to which a Bcc (blind carbon copy) is always sent.Retrieve email Only transfer the message header into the Main Inbox (p. 46).Ret. content Retrieve the contents from the server if only the mes-sage header was received.Del. on server Delete the contents on the server if only the message header was received.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Mailbox.fmVoice message/mailbox64VAR Language: American; VAR issue date: 16-Februar-2004left page (64) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Voice message/mailboxC¢M¢Setup ¢Voice messageMost service providers provide a mailbox in which a caller can leave a voice mail for you • if your phone is switched off or not ready to receive,• if you do not want to answer,• if you are making a phone call (and if Call waiting (p. 85) is not activated).If the voice mail service is not part of your service provider's standard package, you will need to register, and possibly input the settings man-ually. The following sequence may vary from service provider to service provider.Setup bThe service provider supplies you with two phone numbers:Save mailbox numberYou call this phone number to listen to the voice mails left for you. C¢M¢Setup¢Voice messageÏ/JSelect number from Phonebook/Addressbook or enter/change it. §OK§ Confirm.Save call divert numberCalls are diverted to this phone number. C¢T¢Phone setup¢Divert ¢e.g. Unanswered¢SetJEnter phone number.§OK§ Registration with the net-work is confirmed a few seconds later.Listen to message bA new voice message can be announced as follows, depending on the service provider:ÀSymbol plus beep.OrçNotification via SMS.OrYou receive a call with an automatic announcement.Call your mailbox and play the mes-sage(s) back.1Press and hold down (if necessary enter mailbox number). Confirm with §OK§ and §Mailbox§ depend-ing on your service pro-vider.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Instantmsg.fm65Inst. Msg.VAR Language: American; VAR issue date: 16-Februar-2004left page (65) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Inst. Msg. bWith this function you can transfer text, audio clips, pictures and files straight to and from one or more ter-minals (mobile phone, PC). This function is not offered by all service providers. Please ask your service provider about this.Your dialogue partners are entered in contact lists. When a connection has been established, these lists show who is available, whether they want to be disturbed and what mood they are in. GPRS must be switched on.C¢M¢Inst. MessageStart menuLogin Select the access via which the dialogue runsor Account: select (p. 69).Msg. historyRead the messages from the last meeting.Setup Settings for your repre-sentation, the applica-tions and servers.Exit End application.Rapid access ...Select the access (p. 69)C¢M¢Inst. Msg.¢LoginThe current contact list or the list is displayed (if necessary, set access first, p. 69).Specify your own status (p. 70)§Options§ Open menu.My settingsSelect and make entries. BReturn to contact list.Enter new contact (p. 65)§Options§ Open menu.Set Press, then:Add contactselect and enter the user ID at least.BReturn to contact list.Inst. Message with new contact (p. 68)ISelect the contact.CStart Inst. Message.COpen editor.JWrite text. CSend text.... etc.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Instantmsg.fmInst. Msg.66VAR Language: American; VAR issue date: 16-Februar-2004left page (66) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)LoginC¢M¢Inst. Msg.¢LoginSelect the last access to be used (see also Automatic login: p. 70).Contact listsWhen the connection has been established, the contact list or the list of the contact lists is shown for selection.In the contact list, you will find a list of the most recently used contacts. The first time you log in, an “empty” contact list will be generated by the server if necessary.Displays in the list:-ConversationDisplays of the online contacts for the messages are available.-OnlineOnline contacts with whom no con-versation is being held at the moment.-Group bGroups for Inst. Message with sev-eral contacts.-OfflineContacts who are not online at present.Managing the contactsISelect a contact.§Options§ Open menu.Set Select. ContactsDifferent functions are offered depending on the selection:Add contact User ID: Enter a non-ambiguous user (login) name.Nickname: Enter your own nick-name for the contact.Friend: The contact receives the status Friend: and access to personal infor-mation (p. 70).Find contact Search for contact.Delete contact Delete contact from the list.Block contact No more messages are received from the con-tact and the contact receives no status infor-mation from you. This function works for all your lists.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Instantmsg.fm67Inst. Msg.VAR Language: American; VAR issue date: 16-Februar-2004left page (67) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Managing the groups bISelect one of the groups you set up yourself.§Options§ Open menu.Set Select. Group settingsDifferent functions are offered depending on the selection:Creating a new contact listThe current contact list is displayed.§Options§ Open menu.Contact listAvailable contact lists are displayed. §Options§ Open menu.Create Select. Contact list ID:Give the contact list its own, specific name.Name: Allocate self-explanatory names.CConfirm.Add member Add a new group member, see also Add contact Find member Search for group member.Invite Invitation to the contacts in your own group to Inst. Message.Delete member Delete contact from the group member list.Add group Add new group.Find group Search for group on the server (no longer in the "administered groups" list). Create group Group ID: Enter a non-ambiguous group name.Name: Name of group.Topic: Topic of group.Searchable: Other people can look for the group.Welcome msg.: Enter welcome text.Create group Delete group.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Instantmsg.fmInst. Msg.68VAR Language: American; VAR issue date: 16-Februar-2004left page (68) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Contact list options§Options§ Open menu.Start chatA contact list must be displayed.ISelect a contact or a group. CStart communication with the contact. The page is displayed. During Inst. Message with a group, the name of the sender is placed in front of each contribution.COpen editor.JWrite text CSend text. The text appears in the chat soon afterwards.Naturally, you can also receive mes-sages from contacts whom you do not know. This will be pointed out to you in the display, and you can either switch to Inst. Message or ignore/block the contact. Details =Additional information about the contact or the group.My settings Information on your cur-rent personal status (p. 70).Set Functions for managing a contact or a group.Contact list Display contact lists for selection.Block list Display all blocked con-tacts. Can be unblocked.App. settings Set the application (p. 70).Exclude Terminate the applica-tion, the server remains connected.Logout Log off from the server and return to start menu.Help Display help text.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Instantmsg.fm69Inst. Msg.VAR Language: American; VAR issue date: 16-Februar-2004left page (69) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Options (individual contact)§Options§ Open menu.Options (group contact) b§Options§ Open menu.Receiving objects bYou will be informed in the display if sounds or pictures are sent to you during a dialogue. §Accept§ Accept object.or§Reject§ Reject object.Msg. historyC¢M¢Inst. Msg.¢Msg. historyThe messages from the last meeting are displayed. You can read and delete the contributions.Requirement: The server must be disconnected, see Exclude (p. 68) and Automatic login: (p. 70).SettingC¢M¢Inst. Msg.¢Setup¢Select function.AccountThe list of available accesses is displayed.I/CSelect an access to estab-lish a connection.Or<New entry>/Account sett. =Set up an access or change the settings as specified by the service provider. Depending on Send sound =Select and send a melody/tone from the list (DRM p. 17).Send picture =Select and send a picture from the list (DRM p. 17).Send other =Send any file.Details Information about the con-tact (if this is authorised by him).Clear all Delete all texts in the cur-rent Inst. Message.Block contact No more messages are received from the contact and the contact receives no status information from you. This function works for all your lists.Leave group Exit group.Details Information about the group:Group ID:, Name:, Topic:, Owner: Clear all Delete all texts in the cur-rent Inst. Message.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Instantmsg.fmInst. Msg.70VAR Language: American; VAR issue date: 16-Februar-2004left page (70) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)the service provider, the settings may not be changeable.My settingsInformation on your current per-sonal status:§Options§ For each setting, specify who is allowed to view your personal informa-tion:PublicAll contacts.PrivateContacts designated as Friend: (p. 66).HideNobody.App. settingsSettings for the application used:Name: Name of the access.URL: Enter URL, e.g. http://www.abc.comUser ID: Enter a non-ambiguous user (login) name.Password: Enter password (shown as a series of asterisks).Alias: Your own alias by which you can be found on the server.AIM screen name: Name to be displayed in the group.Mood: Information about your own mood, e.g.Happy, Sad, Tired, etc.Status text: Random text information, e.g. “Am at home”.Availability: Availability:Available, Not available, Discreet Cellphone: Enter the phone number with internal extension code.Automatic login: Auto-reconnect to the last access to be used.Timeout: Time without action after which the application is terminated. However, the server remains con-nected.Message info:/Online info: Signal the receipt of mes-sages: Yes/No Signal given as:•Sound •Silent alert •Pop-upPopup windows authorised: Yes/No
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_CB.fm71CB servicesVAR Language: American; VAR issue date: 16-Februar-2004left page (71) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)CB servicesC¢M¢Setup¢CB servicesSome service providers offer infor-mation services (info channels, Cell Broadcast). If reception is activated, you will receive messages on the activated topics in your Topic list. CB messages are displayed in standby mode, longer messages are scrolled automatically.Receive CBYou can activate and deactivate the CB service. If the CB service is acti-vated, standby time for the phone will be reduced.Topic listYou can add any topics to this per-sonal list from the topic index. You can preset 10 entries with their channel numbers (ID) and, if applica-ble, with their names. New topic Select.• If no topic index is available, enter a topic with its channel number and confirm with §OK§.• If the topic index has already been transmitted, select a topic and activate it with §Options§.Topic Select.§Options§ Open list menu.If a topic is selected in the list you can view it, activate/ deactivate it, edit it or delete it.CB languagesReceive Cell Broadcast messages in only one specific language or in all languages.DisplaysÖ,ÕTopic activated/deactivated.pNew messages received on the topic.qMessages already read.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Internet.fmSurf & fun72VAR Language: American; VAR issue date: 16-Februar-2004left page (72) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Surf & funGet the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can download games and applications to your phone. Internet access may require registration with the service pro-vider.Access to the service providerDirect call-up of the browser with the URL from your service provider.Internet C¢O¢InternetThe browser is activated with the pre-set option as soon as you call up the function (Browser settings, p. 73; may be specified/pre-assigned by service provider). Browser menu§Options§ Open menu.End connectionB Press and hold to clear down the connection and close the browser.Navigation in the browserHome Call up the pre-set homepage for the current profile.Bookmarks •List bookmarks Dis-play list of bookmarks stored in the phone. •Bookmark site The current page is saved as a bookmark.Go to... Enter URL for direct dial to an Internet address, e.g. wap.siemens-mobile.com Reload Reload current page.Show URL Display the URL of the page currently loaded for sending via SMS/MME/e-mail.History Display last Internet sites to be visited.Disconnect Disconnect the Internet.File Save object on the current page or save the com-plete page; display saved pages.Settings Set or reset browser (p. 73).Exit browser Close the browser.C • Select a link.• Settings, status on/off.B •Press briefly: back a page.I • One input field/link forward/back.• Scroll one line.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Internet.fm73Surf & funVAR Language: American; VAR issue date: 16-Februar-2004left page (73) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Display symbols in the browser (selection)Enter special characters*,0Select important special characters. Browser settingsC¢O¢Internet§Options§ Open menu.Settings Select.ProfilesPreparation of the phone for Internet access depends on the service pro-vider concerned:Profile pre-setIn most cases, access profiles have already been created for one or more service provider(s).ISelect profile.CActivate profile.Set profile manuallyIf necessary, contact your service provider.§Options§ Open menu.² Connect ´ No network±Network ³ GPRS onlineBrowser Set start option as well as handling of pictures and sounds plus send options.Profiles The list of profiles is dis-played for activation/setting. For more information, con-tact your service provider.Protocol parameters Set protocol parameters, push messages and abort time as well as handling of cookies.Security Set encryption.Context Reset session; delete cache, history and cookies.Your Internet browser is licensed by: Edit Start processing. For the Internet-specific settings below, please contact your service provider.Delete Delete selected profile.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Internet.fmSurf & fun74VAR Language: American; VAR issue date: 16-Februar-2004left page (74) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)BookmarksC¢O¢BookmarksDisplay URL/call up pageList bookmarks Display list of bookmarks stored in the phone.ISelect bookmark.CCall up URL.SaveBookmark siteThe current page is saved in the phone as a book-mark.Bookmark options§Options§ Open menu.Here you will find functions for changing and managing bookmarks and their folders. This includes edit-ing individual entries with the corre-sponding URLs as well as deleting and moving them to other folders.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Games&Apps.fm75Surf & funVAR Language: American; VAR issue date: 16-Februar-2004left page (75) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Surf & fun Games and ApplicationsGames and applications are offered on the Internet. Once downloaded, these are permanently available on your phone. Most applications include instructions. Some applica-tions and games are already pre-installed on your telephone. You will find these listed here: www.siemens-mobile.com/m65RequirementsWAP profile (p. 73) and the access (p. 91) must be configured.DownloadSelect the correct access depending on whether you are loading games or applications:C¢O¢Games orC¢O¢ApplicationsIn addition to URLs and service pro-viders for the download, any availa-ble applications/games and folders will be displayed.Download newISelect a service provider or URL.CStart WAP browser and visit URL.Description file onlyÌThe description file is loaded for information purposes only. The appli-cation/game itself must be loaded separately. or complete downloadËThe application/game is completely loaded.ApplyRemember that applications/games may be protected (DRM, p. 17).ÍThe executable applica-tion is saved on the tele-phone and can be started immediately .Download wiz.C¢O¢Download wiz.You will not be left on your own dur-ing the download!
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Games&Apps.fmSurf & fun76VAR Language: American; VAR issue date: 16-Februar-2004left page (76) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26) Games and Applications options Processing and managing your appli-cations and folders:Additional informationThe following key control is used for many games (virtual joystick): Move Move applications between folders. New folder Create and name new folder.Reinstall Reinstall an application (update).Security Select a safety level.Reinstall Repeat after transmission error.Attributes Show details of the applica-tion/folder (name, version, size, path, producer, date).HTTP profile Display profile list for activation/setting (For standard functions see p. 19)28641 3795Additional informationYou can use WAP to download applications (e.g. ringtones, games, pictures, animations) from the Internet. Downloading or running applications will not affect or change the software already installed on your Java™-enabled mobile phone.Siemens excludes all warranty and liability claims in respect of or in connection with any applica-tions subsequently installed by the customer and any software not included in the original delivery package. This also applies to functions enabled subsequently at the customer's instigation. The purchaser bears sole risk for the loss of, damage to, and any defects arising in, this device or the applications and for any direct damage or conse-quential damage of whatever nature resulting from the use of this application.For technical reasons, such applications and sub-sequent enabling of certain functions are lost in the event of the device being replaced/re-sup-plied and may be lost if it is repaired. In such cases, the buyer is required to download or release the application again. Please ensure that your phone has Digital Rights Management (DRM) so that individual applications downloaded via WAP are protected from unauthorised repro-duction. These applications are then exclusively intended for your phone and cannot be trans-ferred from this even to create a backup. Siemens does not warranty, guarantee or accept any liability for the customer's ability to download or enable applications again or to do so free of charge. If technically possible, secure your appli-cations on the PC with the "mobile phone man-ager", p. 116.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Profiles.fm77SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (77) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)SetupProfilesC¢T¢ProfilesSeveral settings can be stored in a phone profile in order, for example, to adapt the phone to the surround-ing level of noise.• Five standard profiles are provided with default settings. They can be changed however: Normal environment Quiet environment Noisy environment Car Kit Headset • You can set two personal profiles (<Name>).• The special profile Airplane mode is fixed and cannot be changed.Switch onISelect default profile or personal profile.CSwitch on profile.Profile settingsEdit a default profile or create a new personal profile:ISelect profile.§Options§ Open menu.Change sett.Select.The list of available functions is dis-played.When you have finished setting a function, you return to the profile menu where you can change a fur-ther setting.Additional information• Call up the list in standby mode:GThe profile list is displayed.• The active profile is identified with ·.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Profiles.fmSetup78VAR Language: American; VAR issue date: 16-Februar-2004left page (78) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Profile options§Options§ Open menu.Car Kit If an original Siemens Car Kit is used, the profile is switched on automati-cally as soon as the phone is inserted into the cradle (also see accessories). HeadsetThe profile is only switched on auto-matically if an original Siemens headset is used (also see accesso-ries).Airplane modeAll alarms (appointments, alarm clock) are deactivated. This profile cannot be modified. Switch onHScroll to Airplane mode.CConfirm selection.CConfirm safety inquiry again in order to activate the profile. The phone switches itself off auto-matically.Normal modeWhen you switch on your phone again, the previously set profile will be reactivated automatically.Activate Activate selected profile.Change sett. Change profile settings.Copy from Copy settings from another profile.Rename Change personal profile (except default profiles).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Themes.fm79SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (79) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Setup TopicsC¢T¢TopicsLoad a completely new visual pres-entation onto your phone. At the press of a key various functions are re-organised on a topic basis, e.g. Switch on/off animation, back-ground image, screensaver, switch on/off melody, additional anima-tions.Topic files are compressed to save memory space. After being down-loaded (p. 75) or called up fromMy stuff, these are automatically unzipped when activated. Activate new topicISelect topic.CDisplay topic preview.CActivate new topic.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Display.fmSetup80VAR Language: American; VAR issue date: 16-Februar-2004left page (80) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup DisplayC¢T¢Display¢Select function.LanguageSet the language of the display text. When "automatic" is set, the lan-guage of your home service provider is used. If a language that you do not under-stand happens to be set, the phone can be reset to the language of your home service provider with the fol-lowing input (in standby mode):* # 0 0 0 0 # AText inputT9 preferredActivate/deactivate intelligent text entry.Input languageSelect language for text entry. Lan-guages with T9 support are marked with the T9 symbol.WallpaperSet wallpaper graphic for the display.LogoChoose graphic to be displayed instead of the provider logo.Color settingSelect colour skin for the entire user interface. ScreensaverThe screensaver shows a picture in the display as set by you. An incom-ing call and/or pressing any key will end the function except if the safety function is activated. PreviewDisplay the screensaver.StyleSelect Analog clock, Digital clock, Bitmap, Energy saving BitmapSelect image in My stuff.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Display.fm81SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (81) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)TimeoutSet period after which the screen-saver starts.SecurityThe phone code is requested to ter-minate the screensaver.Auto key lockAutomatic keypad locking if no key has been pressed for one minute in standby mode.Unlocking:#Press and hold down.Start up anim.Select animation to be shown when phone is switched on.Shutdn anim.Select animation to be shown when phone is switched off.GreetingEnter greeting to be displayed instead of animation when phone is switched on.Large lettersYou can choose between two font sizes for the display.IlluminationSet display illumination to brighter/darker. The darker the set-ting the longer the standby time.IPress the joystick repeat-edly at the top/bottom to adjust up or down.NoteThe animated Bitmap screensaver and the Digital clock considerably reduce the phone’s standby time.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_DynamicLight.fmSetup82VAR Language: American; VAR issue date: 16-Februar-2004left page (82) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup Dynamic lightC¢T¢Dynamic light¢Select function.The LEDs on the sides of the phone are used to signal different functions visually. Show effectsSwitch on function.SelectYou can set the visual signals for the following functions:Standby Net search d Calls Group calls Other calls During a call Incoming msgs Appointments CarKit conn. Low battery During on/off Soundplayer §Change§ Display the possible rhythms.ISelect them from several flash rhythms.CAssign selection.Play demoAll flash rhythms are displayed in sequence. §Cancel§ Terminate.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Ringtones.fm83SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (83) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Setup Ring tonesC¢T¢Ring tones¢Select function.Set the signal tones on the phone to suit your requirements.Ringer settingOn/off Activate/deactivate all tones. Beep Reduce ringtone to a short signal (beep).Silent alertTo avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alterna-tive. The silent alert can also be acti-vated in addition to the ringtone (e.g. in noisy environments). This function is deactivated when the battery is being charged and acces-sories are connected (except the headset).ISelect from several silent alert versions. VolumeSet different volumes for types of call/functions.ISelectIncoming call Messages Alarm clock Organizer System Applications CThe ringtone plays again.ISet volume.CConfirm setting.Additional informationPlease make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ringtones.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Ringtones.fmSetup84VAR Language: American; VAR issue date: 16-Februar-2004left page (84) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Assign ringtoneA ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection.d CallsAssign a single ringtone to all phone numbers in the Addressbook.Group callsAssign a different ringtone to each group.Other callsAssign one ringtone to the remain-ing calls.More melodiesAssign further ringtones for:Messages Alarm clock Organizer Startup melody Shutdown mel. or record new tones with:Sound recorder (p. 108)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_CallSetup.fm85SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (85) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Setup Call setupC¢T¢Call setup¢Select function.Hide ID bWhen you make a call, your phone number can be displayed on the recipient's display (depending on the service providers).To suppress this display, you can enable the "Hide ID" mode for all sub-sequent calls or just for the next call. You may need to register separately with your service provider for these functions.Call waiting bIf you are registered for this service, you can check whether it is set and you can activate/deactivate it .DivertYou can specify the conditions under which calls should be diverted to your mailbox or other numbers.Status checkYou can check the current divert sta-tus for all conditions. After a short pause, the current situation is trans-mitted by the network and dis-played.ÖCondition set.ÕNot set.ÔDisplay if status is unknown (e.g. with a new SIM card). Clear all bAll set diversions are cleared.Set up call divert (example)The most common condition for call divert is, for example:Unanswered bISelect Unanswered. (Includes the conditions Not reachable, No reply, Busy, see below)CConfirm.Set Select.CConfirm.Ï/JSelect or enter the phone number to which the calls are to be diverted.§Mailbox§ Use existing mail-box phone numbers, or enter them if necessary.CConfirm. After a short pause, the setting is con-firmed by the network.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_CallSetup.fmSetup86VAR Language: American; VAR issue date: 16-Februar-2004left page (86) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)All calls bAll calls are diverted.ÇIcon in the top line of the display in standby mode.Not reachableDivert occurs if phone is switched off or is out of range.No replyA call is only diverted after a delay that is determined by the network. This can take up to 30 seconds (may be set to 5 second intervals).BusyDivert occurs if a call is in progress. If Call waiting is activated (p. 29) you will hear the call waiting tone during a call (p. 31).Receiving fax bFax calls are diverted to a number with a fax connection.Receiving data bData calls are diverted to a phone number with a PC connection. Call screening bOnly calls from phone numbers that are in the Phonebook/Addressbook or assigned to a group are signalled. Other calls are only displayed.Any keyIncoming calls can be accepted by pressing any key (except for B).Minute beepDuring the call, you will hear a beep after each minute as a reminder of the time elapsed. The person you are talking to does not hear this beep.Additional informationNote that the divert is stored in the network and not in the phone (e.g., when the SIM card is changed).Reactivate divertThe last divert has been stored. Proceed as with "Set divert". The stored phone number is displayed. Confirm number.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_PhoneSetup.fm87SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (87) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup Phone setupC¢T¢Phone setup¢Select function.Key tonesSet the type of acoustic key acknowledgement.Info tonesSet service and alarm tones:On/off Activate/deactivate tones.Extended If switched on, a wider range of service tones is available, e.g.: end of menu reached, network connection interrupted.Automatic switch offThe phone switches off each day at the set time.Activate§Time§ Press.JEnter time (24-hour clock).CConfirm.Deactivate§Manual§ Press.CConfirm.Phone identityThe phone identity number (IMEI) is displayed. This information may be useful for customer service. Alternatively, in standby mode enter: * # 0 6 # §Info§ Display further informa-tion about the appliance.Device checkA self-test and individual tests are offered at the end of the last page of information. If you select Self test, all individual test are carried out.Memory assis.The delete assistant will help you if there is insufficient phone memory. If required it can also be started automatically from applications.After their capacities have been checked, all files and folders are dis-played along with their size and may be viewed/opened and, if necessary, deleted.Software versionDisplay the software version for your phone in standby mode:* # 0 6 #, then press §Info§.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_PhoneSetup.fmSetup88VAR Language: American; VAR issue date: 16-Februar-2004left page (88) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)File systemFormat(Phonecode-protected)The phone memory is formatted and all saved data such as ringtones, pic-tures, games etc. are deleted.Clean upCreating more memory by deleting temporary files that are no longer required.Master resetReset phone to default values (fac-tory setting). This does not affect the SIM card or the network settings.Alternatively enter in standby mode:* # 9 9 9 9 # A
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Clock.fm89SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (89) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup ClockC¢T¢Clock¢Select function.Time/dateThe clock must be set correctly at start-up.§Change§ Press.JFirst enter the date (day/month/year), then the time (hours/min-utes/seconds).Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired record-ing.City listISelect a city in the selected time zone.§Options§ Open menu.Date formatSelect the display format for the date.Time formatSelect 24h or 12h.Buddhist yearSwitch to the Buddhist year (not on all phone models). Show clockActivate/deactivate time display in standby mode.Auto time zone bThe time zone is identified automati-cally.Additional informationIf the battery is removed for longer than 30 seconds, the clock must be reset. Set Set time zone.Auto time zone= Have the time zone auto-matically set by the net-work.Search city Search for a city.Help Operating instructions.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Connectivity.fmSetup90VAR Language: American; VAR issue date: 16-Februar-2004left page (90) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup ConnectivityC¢T¢Connectivity¢Select function.GPRS b(General Packet Radio Service)CSwitch GPRS on/offGPRS is a method for transmitting data faster in the mobile network. Use GPRS and if the network has suf-ficient capacity, you can be con-nected to the Internet permanently. Only the actual transmission time is charged by the network operator. Some service providers do not yet support this service. Shown in the displayGPRS infoDisplays information on connection status.IrDAYour phone has an infrared inter-face. With this interface, you can exchange data such as pictures, ring-tones, Addressbook entries, busi-ness cards or organiser data with other devices which also have an infrared interface. The infrared interface is on the right side of the phone. The distance between the two devices must not exceed 30 cm. The infrared windows in both appliances must be aligned as accurately as possible with each other.Shown on the display:¯IrDA activated.®During transmission.£ Activated and available.¢ Registered.¤ Temporarily interrupted.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Connectivity.fm91SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (91) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Data servicesBasic setting and activation of the connection profiles for data trans-mission such as MMS, WAP. The phone default setting varies from service provider to service pro-vider.• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be con-figured manually.If necessary, check with your service provider for details. You will find the current settings for the service pro-vider on the Internet at this address: www.siemens-mobile.com/customercarein the "FAQ" section.Select profileISelect the profile.CConfirm selection.Set profileISelect the profile.§Options§ Open menu.§Edit§ Open the selection.ISelect CSD settings, and/or GPRS settings.§Edit§ Make the settings as spec-ified by your service pro-vider. HTTP profileThe phone default setting varies from service provider to service pro-vider.• The settings have already been implemented by the provider. You can start immediately.• Access profiles have already been created by your provider. Then select and activate profile.• The access profiles must be con-figured manually.If necessary, check with your service provider for details. You will find the current settings for the service pro-vider in the Internat at this address: www.siemens-mobile.com/customercarein the "FAQ" section.IMake the settings.AuthenticationActivate or deactivate encrypted Internet dial-up (CSD connections only).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Connectivity.fmSetup92VAR Language: American; VAR issue date: 16-Februar-2004left page (92) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Fax/dataFax/data mode using a PCWith the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone. Fax and data services must be ena-bled by the service provider. There are variations in fax and data recep-tion, depending on the network. Please ask your service provider about this.Send voice/fax bSet this function on the phone before transmission so that you can switch from voice mode to fax mode.Rec voice/fax b(Only if no special fax or data number is available).Start the required communication program on your PC and select the function on the phone during the call (the PC will take over the connec-tion).End transmissionEnd transmission with PC software and/or press B.Rec fax/data bYour service provider has given you a number for telephoning and a fax/data number.The call is signalled by a special ring-tone and the type of call (fax or data) is displayed. Now start the commu-nication program on your PC to receive the fax/data.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Security.fm93SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (93) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Setup SecurityC¢T¢Security¢Select function.Auto key lockThe keypad is locked automatically if no key has been pressed for one minute in standby mode. This pre-vents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.Direct call(Phonecode-protected)Only one phone number can be dialled (see also p. 32). Only ‚b(PIN2 or phonecode-protected)Dialling options are restricted to SIM-protected phone numbers in the Phonebook. If only area codes are entered, relevant phone numbers can be added to these manually before dialling.If the SIM card does not support PIN2 input, the whole Phonebook can be protected with the phone code.This SIM only b(Phonecode-protected)The phone can be connected to a SIM card once the phone code is entered. Unless the phone code is known the phone will not operate with a different SIM card.If the phone is to be used with a dif-ferent SIM card, enter the phone code when requested.CodesFor description see p. 21:PIN control, Change PIN, Change PIN2, Chg.phonecodeAdditional informationThe keypad can also be directly locked and unlocked in standby mode.In each case:# Hold down.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Security.fmSetup94VAR Language: American; VAR issue date: 16-Februar-2004left page (94) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Barring bBarring restricts the use of your SIM card (not supported by all service providers). You need a 4-digit net-work password for network barring. Your service provider will give you this password. You may need to be registered separately for each barring.All outgoingAll outgoing calls except emergency numbers are barred.Outgo internat(International outgoing)Only national calls can be made.Out.int.x home(International outgoing without home country)International calls are not permitted. However you can make calls to your home country when abroad.All incomingThe phone is barred for all incoming calls (forwarding all calls to mailbox provides a similar effect).When roamingYou do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.Status checkThe following information can be displayed after a status check:ÖBarring set.ÕBarring not set.ÔStatus unknown (e. g. new SIM card).Clear allAll barrings are deleted. A password which the service provider will give you is necessary for this function.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Network.fm95SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (95) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup NetworkC¢T¢Network¢Select function.Line bThis function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone.Select lineSelect the currently used phone number.\Display current phone number.Protected(Phonecode-protected)You may limit usage to one phone number.Network infoThe list of GSM networks currently available is displayed.ÆIndicates non-authorised service providers (depending on SIM card).Choose netwrkNetwork search is restarted. This is useful if you are not on your home network or want to register on a dif-ferent network. The network list is rebuilt when Auto network is set.Auto network Activate/deactivate, see also "Choose netwrk" above. If "Automatic net-work" is activated, the next network on the list is dialled in ranking order of your "preferred networks". Other-wise a different network can be selected manually from the list of the available GSM networks.Preferred net Enter your preferred service provid-ers here for when you leave your home network (e.g. if there are dif-ferences in price).Additional informationSpecial settings may be made for each phone number (e.g., melody, call divert etc.) To do this, first switch to the required phone number. Switch from phone number / connection in standby mode:0Press. §Line 1§ Press.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Network.fmSetup96VAR Language: American; VAR issue date: 16-Februar-2004left page (96) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Your service provider is displayed:§List§ Display list of preferred networks.Create/change entry: <Empty> or select an existing entry, then select a new service provider in the list and confirm.Record new service provider (last entry in the list):Furth.networkSelect, enter the provider data and save it.Band selection bSelect either GSM 900, GSM 1800 or GSM 1900.Fast searchWhen this function is active, net-work reconnection is speeded up (standby time is reduced).User group bDepending on the service provider, you can create groups with this service. These can have access to internal (company) information, for example, or special tariffs apply. The details can be clarified with your service provider.ActiveActivate/deactivate function. "User group" must be deactivated for nor-mal phone use.Select groupYou can select or add groups other than preferred groups (see below). Code numbers for the groups are obtained from your service provider.All outgoingIn addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted.Pref. groupIf activated, calls may only be made within this standard user group (depending on the network configu-ration).Additional informationIf you are outside your home network, your phone automatically dials another GSM network.If the signal strength of the preferred net-work is inadequate when you switch on the phone, the phone may register in a different network. This can change when the tele-phone is next switched on or if another net-work is selected manually.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_SetupAccessory.fm97SetupVAR Language: American; VAR issue date: 16-Februar-2004left page (97) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup AccessoriesC¢T¢Accessories¢Select function.Car KitOnly in combination with an original Siemens handsfree car kit (see accessories). The car kit profile is activated automatically once the phone is inserted into the cradle.Auto answer (factory default: off)Calls are accepted automatically after a few seconds. Eavesdropping is possible!ÅShown on the display.Automatic switch off(factory default: 2 hours)The phone is powered by the car's power supply. You can adjust the time between switching off the igni-tion and the time at which the phone switches off automatically.Car loudspk.Improves playback in certain circum-stances.Automatic settings• Permanent illumination: switched on.• Key lock: switched off. • Charging the phone battery.• Automatic activation of car kit pro-file when the phone is inserted.HeadsetOnly in conjunction with an original Siemens headset (see accessories). If an original Siemens headset is used the profile is automatically activated when the headset is plugged in. Auto answer (factory default: off)Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset. Automatic settingAccept call with Call key or PTT key (Push To Talk), even when the auto key lock is activated.Auto answerIf you do not notice that your phone has accepted a call, there is the danger that the caller may eavesdrop.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MyMenu.fmMy menu98VAR Language: American; VAR issue date: 16-Februar-2004left page (98) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)My menuCPress.§My menu§ Press.Create your own menu with fre-quently used functions, phone num-bers or Internet pages. The list of 10 entries is preset. You can, however, change it as you like.UseISelect the required entry.CConfirm.OrAIf the entry selected is a phone number, you can also call it with the Call key.Change menuYou can replace each entry (1–10) with another entry from the selec-tion list.ISelect the required entry.§Change§ The function list is opened for selection.I Select the new entry from the list.CConfirm. The entry is saved.If Phonebook is selected, the phone number must also be selected; if Internet is selected, the bookmark must also be selected.Reset all(Phone code required)§Reset all§ Select. After a security prompt, the pre-assign-ment is reset.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_FastDial.fm99Fast accessVAR Language: American; VAR issue date: 16-Februar-2004left page (99) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Fast accessYou can assign one important phone number or a function to each of the two soft keys and number keys 2 to 9 (speed-dial numbers). The phone number can then be dialled or the function can be started at the touch of a button. Soft keysChangeFor example, the Internet function is assigned to the soft key. To change this (in standby mode):§Internet§ Press briefly.§Change§ Scroll to new assignment in the list.CConfirm.•Special case Phone number. Pick out a name from the Phone-book/Addressbook for assignment to the key.•Special case Bookmark. Scroll to a URL in the bookmark list for assignment to the key.ApplyIn standby mode:Application"Internet" is just used as an example here.§Internet§ Press and hold; the appli-cation is started.Phone numberThe setting "Carola" is used here only as an example.§Carol§ Press and hold, the phone number is dialled.Additional informationThe service provider may have already assigned functions to a soft key (e.g., access to "SIM services" or direct call-up of the Internet portal). It may not be possible to modify this key assignment.The left soft key may sometimes be replaced automatically by p/À to access a new message for example.Z£XService provider01.03.2004 10:10Internet Help
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_FastDial.fmFast access100VAR Language: American; VAR issue date: 16-Februar-2004left page (100) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Speed dialling keysNumber keys 2 to 9 can be used as speed dialling numbers for fast access. Number key 1 is reserved for the mailbox phone number (p. 64) and number key 0 is reserved for switching over two connections dur-ing use (p. 95).ChangeIn standby mode:3Press number key briefly (e.g. number 3). If this number is still free:§Set§ Press.Select a new function from the list and confirm with §OK§.Or If an assignment has already been made to this key (assignment dis-played above the right soft key):C Press briefly.§Change§ Scroll to application in the list.CConfirm.• Special case Phone number. Pick a name from the Phone-book/Addressbook for assignment to the key.• Special case Bookmark. Scroll to a URL in the bookmark list for assignment to the key.ApplySelect a stored phone number or start a stored application (e.g. Inter-net).In standby mode:3 Press briefly.The assignment of the number key 3 is displayed above the right soft key e.g.:§Internet§ Press and hold down.Or simply3Press and hold down.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Organizer.fm101OrganizerVAR Language: American; VAR issue date: 16-Februar-2004left page (101) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)OrganizerCalendarC¢Q¢CalendarYou can enter appointments in the calendar. Time and date must be set for the calendar to work correctly.The calendar offers you three views:Monthly viewSpecial colour coding:Day with entries for appointments, day-long appointments, weekends.Navigation:FOne day forward/back.IOne week forward/back.CDaily view open.Weekly viewSpecial displays:Appointments are shown as a verti-cal colour bar on the horizontal hour division.Navigation:FOne day forward/back.IForward/backward by the hour through the day.Daily viewSpecial displays:Description of appointment. Navigation:FOne day forward/back.ITo the start/end of the day or next/last entry.Calend. setupC¢Q¢Calend. setupStart of day:Time when the working day begins.Start of week:Weekday on which the monthly and weekly view on the left starts.WeekendSet the days for the weekend.Synchronising with a PCWith the mobile phone manager (p. 116), you can synchronise appointments, tasks and memos with Outlook®.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Organizer.fmOrganizer102VAR Language: American; VAR issue date: 16-Februar-2004left page (102) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)AppointmentsC¢Q¢AppointmentsAppointments are displayed in chronological order in a list.Enter new appointment<New entry>Select.Types:cMemo Text input for description.dVoice memo Enter voice memo. Shown with alarm.eCall Enter phone number to be displayed with the alarm.fMeeting Text input for description.gVacation Enter start and end date.hBirthday Enter name and date.Different input/selection fields are displayed depending on the type. The number of fields can be restricted, see Default at the end of the list. Description:Description of appointment.Phone number:Enter a phone number or select one from the Addressbook.Voice memo:Enter a voice recording, see Dictation mac, p. 105.Location:Location of appointment.Whole day:All-day appointment: Yes/NoStart date:Date when appointment starts.Start time:Time when appointment starts.End date:Date when appointment ends.End time:Time when appointment ends.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Organizer.fm103OrganizerVAR Language: American; VAR issue date: 16-Februar-2004left page (103) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Alarm time:On/off or Silent alert.JEnter the period of time before the appointment and select the time unit:Minutes, Hours, DaysRecurrence:Select a timeframe for repeating the appointment:No, Daily, Weekly, Monthly, YearlyEnter a parameter for repeating:Forever, Until, Events (number).If Weekly is selected, certain week-days can be highlighted. DefaultIn the list, select those fields which are to be offered for future entries.Information on the alarmWhen the set date and time are reached there is an audio and a vis-ual alarm. If an alarm is missed it appears in the list of missed appoint-ments (p. 104).Alarm type Memo:Meeting: The text is shown in the dis-play.Alarm type Call: The phone number is displayed and can be dialled immediately.Alarm type Birthday: You can send special birthday greetings by SMS, MMS, e-mail or a call via §Options§. Use Snooze to set the alarm to repeat.TasksC¢Q¢TasksA task is displayed like an appoint-ment in the agenda of the selected day. However, unlike an appoint-ment it does not require a time. When no time is entered the task appears at the top of the list every day until it is marked as completed.The entries are made in the same way as Appointments (see "Appoint-ments"). Then:Additional informationDisplay above set alarms:¹Alarm clock»AppointmentAn alarm sounds even when the phone is switched off (except in Airplane mode, p. 78). The phone does not go to standby mode. Pressing any key will lead to Snooze (see below).
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Organizer.fmOrganizer104VAR Language: American; VAR issue date: 16-Februar-2004left page (104) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Status:Select Done or Outstanding. Priority:Select 5 levels from Lowest to Highest. Use dateIf activated with Yes, the following time-input option is offered.Due date:/Expiry time:Enter the date and time by when the task is to be completed.Alarm: and Default as for Appointments.NotesC¢Q¢NotesWrite and manage brief text memos.Enter a new memo<New entry>Select.JEnter text. The first line is displayed as a "Title" in the memo list. Total length: max. 160 characters.§Options§ Open menu.Save Save memo. When Confi-dential is selected, a memo is protected with the phone code.Missed appts.C¢Q¢Missed appts.Events with an alarm (Appointments, Tasks) to which you have not reacted are listed for reading.Organiser optionsDepending on the application used (Calendar, Appointments, Tasks, Notes) and the current situation, different functions are offered.§Options§ Open menu.Delete Delete entry.Delete until Delete all entries prior to a certain date.Delete all Delete all entries after confirmation.Delete done Delete all completed tasks.Activate/Deactivate Switch alarm on/off.Filter Display all entries with the selected feature.Confiden-tial Protect note with phone code. We recommend that you do not store any pass-words (PIN, TAN etc.) as notes.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Organizer.fm105OrganizerVAR Language: American; VAR issue date: 16-Februar-2004left page (105) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Dictation macC¢Q¢Dictation macUse the dictating machine to record short voice memos. • Use your phone as a dictating machine when on the move.• Record a memo as a reminder or as a note for others.• Add a voice memo to an appoint-ment in the calendar.• Record a call - useful for remem-bering numbers or addresses.New recording<New entry>Select.The remaining time avail-able, as well as the record-ing time, are shown in the display.CA brief beep sounds when the recording starts. CPause/record alternately.DEnd recording.The recording is automat-ically saved with a time stamp. Rename with §Options§.PlaybackISelect the desired record-ing.CPlayback/pause.D/EPress and hold for rapid rewind and fast forward.Dictating machine options§Options§ Open menu.Warning!The use of this feature may be subject to restrictions under criminal law. Please inform the other party to the conver-sation in advance if you want to record the conversation and please keep such record-ings confidential. You may only use this feature if the other party to the conversation agrees.Loudspeaker Playback via the built-in loudspeaker.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Organizer.fmOrganizer106VAR Language: American; VAR issue date: 16-Februar-2004left page (106) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Time zonesC¢Q¢Time zonesThe time zone can be selected in the world map or a city list:World mapFSelect the desired record-ing.City listISelect a city in the selected time zone.Time zone options§Options§ Open menu.Set Specify the time zone.Auto time zone= The time zone is switched automatically to local time by the network.Search city Search for a city.Help Operating instructions.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Extras.fm107ExtrasVAR Language: American; VAR issue date: 16-Februar-2004left page (107) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)ExtrasSIM services (optional)C¢S¢SIM servicesYour service provider may offer spe-cial applications such as mobile banking, share prices, etc. via the SIM card.If you have such a SIM card, the SIM services will appear in the main menu under "Extras" or directly above the soft key (on the left).USymbol for SIM services.Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone can support future addi-tions in your service provider's user package. For further information, please contact your service provider.Alarm clockC¢S¢Alarm clockThe alarm will ring at the time set by you, even when the phone is switched off. FActivate/deactivate the alarm.HSwitch to time setting.JSet alarm call time (hh:mm).HSwitch to week days.FNavigate to the various days.CDisplay options: alarm call time and days.CSet days for alarm calls. Press again to delete the highlighting.Press and hold to high-light/unhighlight all the days.§OK§ Confirm setting.Additional information¹Screen display in standby mode: alarm clock activated.Use Snooze to set the alarm to repeat.éAlarm clock¹§On§07:30Mo Tu We Th Fr Sa SuEdit OK
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Extras.fmExtras108VAR Language: American; VAR issue date: 16-Februar-2004left page (108) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Sound recorderUse the sound recorder to record noises and sounds for use as ring-tones. The sound recorder is usually started from other applications/func-tions such as assigning a ringtone.New recordingStart from main menuC¢S¢Sound recorder<New entry>Select.The remaining time avail-able, as well as the record-ing time, are shown in the display.Start it from another application as followsThe recording display appears:CA brief tone sounds when the recording starts. CPause/record alternately.DEnd recording.The recording is saved with a timestamp in the Sounds folder. Rename with §Options§.§Insert§ Transfer the recording into the application.PlaybackISelect the desired record-ing.CPlayback/pause.D/EPress and hold for rapid rewind and fast forward.§Options§ Open menu.Loudspeaker Playback via the built-in loudspeaker.Set as... Set the recording as a ringtone.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Extras.fm109ExtrasVAR Language: American; VAR issue date: 16-Februar-2004left page (109) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Calc.C¢S¢Calc.The calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the matrix with the calculation func-tions) are located in the top half of the display. JEnter digit(s).F/INavigate functions.CUse function. The result is calculated and displayed immediately.Calculator options§Options§ Open menu.Unit converterC¢S¢Unit converterYou can convert various measure-ment units into other measurement units.The following types are offered with various units:Velocity Energy Mass Pressure Time Volume Area Length Power Temperature Currency Basic functions:+, -, *, / Basic calculation types=Result1/x Reversion%Convert to percentage.Decimal point.±Sign change "+"/"–"§Options§ Expansion of the range of functions:Square rootSquareeExponentMS Save displayed numberMR Call up saved numberM+ Insert number from memoryxx2Convert Call up the unit con-verter with the current result.Clear all Delete all units.Extended mode/Basic mode Convert calculation functions.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Extras.fmExtras110VAR Language: American; VAR issue date: 16-Februar-2004left page (110) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Example for Velocity units: Converting the units/currencyFSelect the source unit/cur-rency.HSwitch to the input field.JEnter the quantity to be converted. HSwitch to the selection field.FSelect the target meas-urement unit/currency. The result is displayed immediately.You can use both input fields alter-nately. Special key functions:*Set decimal point.#Change sign. CurrencyWhen you call up the function, you must enter a basic currency into which the conversions are to be made. JEnter currency (e.g. euro).§Save§ Store entry.Now enter the name and exchange rate of the currencies to be con-verted. §Options§ Open menu.StopwatchC¢S¢StopwatchTwo intermediate times can be recorded and saved. CStart/stop.*Save intermediate time.After a stop:CReset to zero.Stopwatch options§Options§ Open menu.Type UnitsVelocity Kilometers/h, Meters/sec, Miles/h, Miles/sec, Knots, Mach Add currency Enter new currency and exchange rate.Set as base Use entered currency as basic currency.Edit rate Change the exchange rate of the basic currency.Calc. Start calculator.(For standard functions see p. 19)Stopwatch list Display saved entries.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Extras.fm111ExtrasVAR Language: American; VAR issue date: 16-Februar-2004left page (111) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)CountdownC¢S¢CountdownA set time elapses. The last 3 seconds are indicated by a beep. At the end a special beep sounds. If no time has been entered:COpen input window.JSet period of time.CConfirm.If a countdown time is specified:CStart countdown.While the time is elapsing:CInterrupt counter.CLet counter continue running.§Reset§ Reset counter to starting time.Remote synchronisationC¢S¢Remote sync.You can use this function remotely to access externally filed data (addresses, calendar, etc.) and syn-chronise these with the data on your phone. The data can, for example, be saved on a company computer or the Internet e.g.:www.siemens-mobile.com/syncml Synchronise§Sync§ The computer is selected and synchronisation started. When completed, the actions which have been performed are dis-played.§Next§ Scroll through the various displays.Sync. settingThe following settings can be made prior to synchronisation:Sync. profileYou can choose between 5 profiles. ISelect profile.CActivate profile.Or§Edit§ Set profile
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Extras.fmExtras112VAR Language: American; VAR issue date: 16-Februar-2004left page (112) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Server sett. Last sync:Time of the last synchronisation.Sync. mode•Sync data: Modified data or All data •Sync instruction: Two-way, Device update or Server update Date rangeSelect On/off Enter the time in weeks in which entries (past and future) are to be synchronised. Sync items: Highlight database areas to be synchronised:Calendar Address book Notes Tasks CSave settings.Providers Display the current service provider.Homepage: e.g. www.siemens-mobile.com/syncmlPort: Enter port number.e.g. 80.Login: Enter user name (login name).Password: Enter password (shown as a series of asterisks).Calendar pathContacts pathNotes pathTask pathe.g., eventse.g., contactse.g., taskse.g., notesHTTP authentica-tion.Confirmation required;Yes/No (if No, the input fields are not visible).HTTP name: Enter name.HTTP password: Enter password.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MediaPlayer.fm113Media playerVAR Language: American; VAR issue date: 16-Februar-2004left page (113) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Media playerWhen you are viewing a pic-ture/video or listening to a melody, the application starts a media play-back. FBrowse to the next media file.0–9Switch on display illumi-nation.PicturesThe following functions can be applied to a displayed picture:CZoom function if the dis-played picture has a higher resolution than the display. The two soft keys (+/–) enlarge/reduce the picture. The joystick moves the picture detail.5 Centre the picture.#Switch to full screen mode and back again.§Send§ E.g. send via MMS or e-mail.Melodies/videoThe media playback offers the fol-lowing functions for melody and video playback:CPlay or pause, depending on the situation.ISet volume.*Switch to mute.§Stop§ Stop function.BEnd playback.Options§Options§ Open menu.Different functions are offered depending on the starting situation and the object.Volume Set the volume with the joystick.Set as... Set picture, e.g., as Wall-paper, Logo and sounds e.g., for Incoming call, Startup melody.Slideshow Automatic run-through in full screen mode. Change individual picture with joy-stick.Edit Access to picture editing.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MediaPool.fmMy stuff114VAR Language: American; VAR issue date: 16-Februar-2004left page (114) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)My stuffTo organise your files, you can use the file system like a PC file manager. There are separate folders for the various data types in My stuff. C¢N The list of the folders and files is dis-played.NavigationISelect a file/folder in lists.F/ IThe cursor can be moved in the preview.COpen folder or start file with related application.<New picture>/<New Sound>The application for the folder cur-rently selected is loaded.<New downl.>The WAP browser is started and the download page displayed.My stuff options§Options§ Open menu.Move Place highlighted file(s) or folder in temporary memory.Copy Place highlighted file(s) or folder in temporary memory.Paste Transfer content of tem-porary memory into cur-rent folder. New folder Create a new folder and name it.Preview Switch over to miniature view.Attributes Display information on file or folder selected.(For standard functions see p. 19)
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MediaPool.fm115My stuffVAR Language: American; VAR issue date: 16-Februar-2004left page (115) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Index structureSeparate folders have already been created for different data types inMy stuff. These folders cannot be changed.Folder Description FormatPictures Pictures bmpbmxjpg/jpegpnggifVideos Videos 3gpAnima-tions Switch animations on/offbmxgifSounds Melodies midamrwavThemes Loaded theme (zipped)Theme configura-tion (unzipped)sdtstcSkins Loaded user inter-facesscsGames Java archiveDownload infojarjadApplica-tions Applications *Misc Text modulesVoice recordingstmovmoDepending on the service provider, the structure, content and functionality ofMy stuff may vary.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_PhoneManager.fmMobile Phone Manager116VAR Language: American; VAR issue date: 16-Februar-2004left page (116) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Mobile Phone ManagerThe Windows® PC program, Mobile Phone Manager, allows you to use extended phone functions from your PC. Amongst other things, you can easily update the phone’s Address-book, read, save and send SMS and MMS messages, or synchronise your phone with Outlook®. The phone and PC communicate via a data cable (See Accessories, p. 135). You can download the software from the Internet: www.siemens-mobile.com/m65Contacts managementYou can use contacts management to manage the personal contacts you have stored in your phone, to add new ones and to delete and edit them. You can compare and copy contacts between your phone, Out-look® and other Siemens phones (including Gigaset).SMS and MMS management (messages)You can create MMS and SMSmes-sages conveniently using your PC. This means you can use all the options your PC offers, and use your sounds and pictures to create MMS and EMS messages. You can read, forward, print, delete and archive your messages.Backup and restoreYou can use the backup function to save backup copies of your phone data regularly to your PC. If you should lose the data you have in your phone or change your phone you can quickly re-instate all the data using the restore function.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_PhoneManager.fm117Mobile Phone ManagerVAR Language: American; VAR issue date: 16-Februar-2004left page (117) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Bookmark management (browser & bookmarks)Use your PC for WAP surfing and to define your preferred WAP sites. Save the WAP addresses as book-marks on your phone so that you can quickly call them up at a later time when you are on the move. Phone explorerYou can use the phone explorer to read your phone’s file system. Pictures, sounds and much more can easily be copied between the phone and PC by dragging and dropping.GPRS modemThe GPRSmodem establishes an Internet connection via your mobile phone so that you can surf the Inter-net on your laptop while on the move and at the touch of a button. Processing pictures and photos (images)Picture/photo processing offers the user the opportunity to conveniently create, edit and manage pictures and photos. Filters and effects are offered to help create colourful, attractive graphics. The user-friendly user interface makes child’s play of transferring pictures/photos from or into the mobile phone, and of changing the graphic settings.Ringtone and MP3 management (sound)The sound module offers the user the opportunity to conveniently manage just about all sound formats and store them on the phone. It also supports MP3 play lists and the con-figuration of your ringtones.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_FAQ.fmQuestions & Answers118VAR Language: American; VAR issue date: 16-Februar-2004left page (118) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Questions & AnswersIf you have any questions on the use of your phone, you can contact us atwww.siemens-mobile.com/customercare around the clock. As further help we have listed below some frequently asked questions and answers.Problem Possible causes Possible solutionPhone cannot be switched on.On/Off key not pressed long enough.Press On/Off key for at least 2 seconds.Flat battery. Charge battery. Check charging indicator in the dis-play.Battery contacts dirty. Clean contacts.See also below under “Charging error”.Standby time is too short.Frequent use of organiser and games.Restrict use if possible.Fast search activated. Deactivate speed search(p. 96).Display illumination on. Switch off display illumination (p. 81).Unintentional keystrokes (illumi-nation!).Activate key lock (p. 93).Charging error(charge icon not dis-played).Battery totally discharged. 1) Plug in charger cable, battery is on charge. 2) Charge icon appears after approx. 2 hours.3) Charge battery.Temperature out of range: +5 °C to +40 °C.Make sure the ambient temperature is right, wait for a while, then recharge.Contact problem Check power supply and connection to the phone. Check battery contacts and telephone connection socket, clean them if necessary, then insert battery again.No mains voltage. Use different mains power socket, check mains voltage.Wrong charger. Only use original Siemens accessories.Battery faulty. Replace battery.SIM error. SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 13).Dirty SIM card contacts. Clean SIM card with a dry cloth.SIM card with wrong voltage. Use 3V SIM cards only.SIM card damaged (e.g. bro-ken).Carry out a visual check. Change SIM card at serv-ice provider.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_FAQ.fm119Questions & AnswersVAR Language: American; VAR issue date: 16-Februar-2004left page (119) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)No network connec-tion.Weak signal. Move higher, to a window or an open space.Outside GSM range. Check service provider's coverage area.Invalid SIM card. Complain to the service provider.New network not authorised. Try manual selection or select a different network (p. 95).Network call barring is set. Check network barrings (p. 94).Network overloaded. Try again later.Phone loses net-work.Signal too weak. Reconnection to another service provider is auto-matic (p. 95). Switching phone off and on again can speed this up.Calls not possible. Second line set. Set first line \ (p. 96).New SIM card inserted. Check for new barrings.Charge limit reached. Reset limit with PIN2 (p. 43)Credit used up. Load credit.Specific uses of phone not possible.Call restrictions are in place. Barrings can be set by service provider. Check bar-rings (p. 94).Impossible to make entries in Phone-book/Addressbook.Phonebook/Addressbook is full. Delete entries in Addressbook/Phonebook (see Standard functions, p. 19).Voice message not functioning.Call divert to mailbox not set. Set call divert to mailbox (p. 64).ã flashes to indi-cate an SMS.SMS memory is full. Delete SMS messages (see Standard functions, p. 19) or archive them (p. 50).ä flashes to indi-cate an MMS.MMS memory is full. Delete MMS messages (see Standard functions, p. 19).å flashes to indi-cate an MMS.Phone memory full. Delete messages, pictures, videos, games or appli-cations.Function cannot be set.Not supported by service pro-vider or registration required.Contact your service provider.Capacity problems with, for example, Games & More, ring-tones, pictures, vid-eos, SMS archive.Phone memory full. Delete files in the relevant areas. To delete specific files you can use the delete assistant (p. 87).No WAP access, downloading not possible.Profile not activated, profile set-tings wrong/incomplete.Activate or set WAP profile (p. 73). If necessary ask your service provider.Problem Possible causes Possible solution
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_FAQ.fmQuestions & Answers120VAR Language: American; VAR issue date: 16-Februar-2004left page (120) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Text message can-not be sent.Service provider does not sup-port this service.Contact your service provider.The service centre phone number has not been set or has been set incorrectly.Set service centre (p. 51).SIM card contract does not sup-port this service.Contact your service provider.Service centre too busy. Repeat message.Recipient does not have a com-patible phone.Check.EMS pictures & sounds are not dis-played at the desti-nation phone.Destination phone does not sup-port the EMS standard.No Internet access possible.Incorrect WAP profile set, or wrong or incomplete settings.Check WAP settings (p. 73) contact your service provider if necessary.PIN error/PIN2 error.Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, contact your service provider.Phone code error. Three wrong entries. Contact Siemens Service (p. 121).Service providerCode error.No authorisation for this service. Contact your service provider.Too few/too many menu entries.Functions may have been added or deleted by the service provider via the SIM card.Check with your service provider.No fax possible. Wrong settings in the PC. Check settings (p. 92).No authorisation for this service. Contact your service provider.Charge meter does not work.Charge pulse is not transmitted. Contact your service provider.DamageSevere shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!Problem Possible causes Possible solutionReset settings to the factory default, p. 88: * # 9 9 9 9 # A
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Hotline.fm121Customer CareVAR Language: American; VAR issue date: 16-Februar-2004left page (121) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Customer CareAbu Dhabi .........................................0 26 42 38 00Argentina .....................................0 80 08 88 98 78Australia..........................................13 00 66 53 66Austria.............................................05 17 07 50 04Bahrain .................................................... 40 42 34Bangladesh.......................................0 17 52 74 47Belgium.............................................0 78 15 22 21Bolivia ...............................................0 21 21 41 14Bosnia Herzegovina..........................0 33 27 66 49Brazil............................................0 80 07 07 12 48Brunei ..................................................02 43 08 01Bulgaria................................................02 73 94 88Cambodia ............................................12 80 05 00Canada ........................................1 88 87 77 02 11China ...........................................0 21 38 98 47 77Croatia ..............................................0 16 10 53 81Czech Republic.................................2 33 03 27 27Denmark ..............................................35 25 86 00Dubai ................................................0 43 96 64 33Egypt.................................................0 23 33 41 11Estonia.................................................06 30 47 97Finland............................................09 22 94 37 00France.............................................01 56 38 42 00Germany ......................................0 18 05 33 32 26Greece .........................................0 80 11 11 11 16Hong Kong.......................................... 28 61 11 18Hungary ..........................................06 14 71 24 44Iceland .................................................. 5 11 30 00India.............................22 24 98 70 00 Extn: 70 40Indonesia .....................................0 21 46 82 60 81Ireland.............................................18 50 77 72 77Italy ................................................02 24 36 44 00Ivory Coast.......................................... 05 02 02 59Jordan...............................................0 64 39 86 42Kenya.................................................... 2 72 37 17Kuwait ................................................... 2 45 41 78Latvia .................................................... 7 50 11 18Lebanon.............................................. 01 44 30 43Libya ...............................................02 13 50 28 82Lithuania ...........................................8 52 74 20 10Luxembourg........................................ 43 84 33 99Macedonia .......................................... 02 13 14 84Malaysia....................................+ 6 03 77 12 43 04Malta.......................................+ 35 32 14 94 06 32Mauritius ............................................... 2 11 62 13Mexico .......................................01 80 07 11 00 03We offer fast, individual advice! You have several options:Our online support on the Internet:www.siemens-mobile.com/customercare We can be reached any time, any place. You are given 24 hour support on all aspects of our products. Here you will find an interactive fault-finding system, a compilation of the most fre-quently asked questions and answers, plus user guides and current software updates to download.You will also find the most frequently asked questions and answers in the section entitled Questions & Answers in this user guide.When calling customer service, please have ready your receipt and the phone identity number (IMEI, to display press *# 0 6 #), the software version (to display, press *# 0 6 #, then §Info§) and if available, your Siemens Service customer number.Qualified Siemens employees are waiting to offer you expert information about our products and installation. In some countries repair and replace services are impossible where the products are not sold through our authorised dealers.If repair work is necessary, please contact one of our service centres:
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Hotline.fmCustomer Care122VAR Language: American; VAR issue date: 16-Februar-2004left page (122) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Morocco...............................................22 66 92 09Netherlands .................................0 90 03 33 31 00New Zealand...................................08 00 27 43 63Nigeria ..............................................0 14 50 05 00Norway.................................................22 70 84 00Oman....................................................... 79 10 12Pakistan..........................................02 15 66 22 00Paraguay ..........................................8 00 10 20 04Philippines ........................................0 27 57 11 18Poland.............................................08 01 30 00 30Portugal ............................................8 08 20 15 21Qatar....................................................04 32 20 10Romania .........................................02 12 04 60 00Russia..........................................8 80 02 00 10 10Saudi Arabia .....................................0 22 26 00 43Serbia .............................................01 13 80 95 50Singapore ............................................62 27 11 18Slovak Republic ..............................02 59 68 22 66Slovenia............................................0 14 74 63 36South Africa ....................................08 60 10 11 57Spain.................................................9 02 11 50 61Sweden.............................................0 87 50 99 11Switzerland .....................................08 48 21 20 00Taiwan ............................................02 23 96 10 06Thailand............................................0 27 22 11 18Tunisia .................................................71 86 19 02Turkey..........................................0 21 65 79 71 00Ukraine ........................................8 80 05 01 00 00United Arab Emirates........................0 43 66 03 86United Kingdom ...........................0 87 05 33 44 11USA .............................................1 88 87 77 02 11Vietnam...........................................84 89 30 01 21Zimbabwe ............................................04 36 94 24
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Maintenance.fm123Care and maintenanceVAR Language: American; VAR issue date: 16-Februar-2004left page (123) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Care and maintenanceYour phone has been designed and crafted with great care and attention and should also be treated with care. The suggestions below will help you to enjoy your phone for many years.• Protect your phone from moisture and humidity! Precipitation, humidity and liquids contain min-erals that will corrode electronic circuits. Should your phone none-theless become wet, disconnect it immediately from any power sup-ply, remove the battery and leave the open phone to dry at room temperature!• Do not use or store the phone in dusty, dirty areas. Its moving parts may become damaged.• Do not store your phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. • Do not store your phone in cold areas. When the phone warms up again (to its normal ambient tem-perature), moisture can form inside the phone, which may dam-age electronic components. • Do not drop, knock or shake your phone. Rough handling can dam-age components inside the device!• Do not use harsh chemicals, clean-ing solvents, or strong detergents to clean the phone!• The phone has better protection against splashes, dust and knocks if the supplied seals and the metal bracket are used as indicated in the assembly instructions (p. 14).The suggestions given above apply equally to your phone, battery, charger and all accessories. If any of these parts are not working properly, take them to your nearest qualified service outlet. The personnel there will assist you and, if necessary, repair the device.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Data.fmProduct data124VAR Language: American; VAR issue date: 16-Februar-2004left page (124) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Product dataDeclaration of conformitySiemens Information and Communi-cation mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other rel-evant provisions of European Direc-tive 1999/5/EC (R&TTE). The declara-tion of conformity (DoC) concerned has been signed. Please call the com-pany hotline if you require a copy of the original, or: www.siemens-mobile.com/conformity Technical data Operating timesThe operating time depends upon the respective conditions of use. Extreme temperatures considerably reduce the phone’s standby time. Avoid placing the phone in the sun or on a heater.Talktime: 100 to 300 minutesStandby time: 60 to 250 hoursGSM class: 4 (2 watt)Frequency range: 880–960 MHzGSM class: 1 (1 watt)Frequency range: 1,710–1,880 MHzGSM class: 1 (1 watt)Frequency range: 1,850–1,990 MHzWeight: 105 gSize: 109 × 49 × 19 mm (89 ccm)Li-Ion battery: 750 mAhOperating temper-ature:–10°C to +55°CSIM card: 3.0 VPhone IDYou will need the following details if you lose your phone or SIM card: the number of the SIM card (on the card):..............................................................15-digit serial number of the phone (under the battery):..............................................................the customer service number of the service provider:..............................................................Lost phoneIf you lose your phone or SIM card contact your service provider immediately to pre-vent misuse.Action taken Time(min)Reduction of stand-by time byCalling 1 30–90 minutesLight * 1 40 minutesNetwork search1 5–10 minutes* Keypad input, games, organiser etc.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fm125U.S. FDAVAR Language: American; VAR issue date: 16-Februar-2004left page (125) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)U.S. FDAThe U.S. Food and Drug Admin-istration's (FDA) Center for Devices and Radiological Health Consumer Update on Mobile PhonesFDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is know – and what remains unknown – about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.Why the concern?Mobile phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the micro-wave range while being used. They also emit very low levels of radio fre-quency energy (RF), considered non-significant, when in the stand-by mode. It is well known that high lev-els of RF can produce biological dam-age through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these ques-tions, no clear picture of the biologi-cal effects of this type of radiation has emerged to date. Thus, the avail-able science does not allow us to conclude that mobile phones are absolutely safe, or that they are unsafe. However, the available sci-entific evidence does not demon-strate adverse health effects associ-ated with the use of mobile phones.What kinds of phones are in question?Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversa-tion. These types of mobile phones are of concern because of the short distance between the phone's antenna – the primary source of the RF – and the person's head. The exposure to RF from mobile phones in which the antenna is located at greater distances from the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a per-son's RF exposure decreases rapidly with distance from the source. The safety of so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fmU.S. FDA126VAR Language: American; VAR issue date: 16-Februar-2004left page (126) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)How much evidence is there that hand-held mobile phones might be harmful?Briefly, there is not enough evidence to know for sure, either way; how-ever, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments inves-tigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results. A few ani-mal studies, however, have sug-gested that low levels of RF could accelerate the development of can-cer in laboratory animals. In one study, mice genetically altered to be predisposed to developing one type of cancer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether results obtained from ani-mal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies showed increased tumor development used animals that had already been treated with cancer-causing chemi-cals, and other studies exposed the animals to the RF virtually continu-ously – up to 22 hours per day.For the past five years in the United States, the mobile phone industry has supported research into the safety of mobile phones. This research has resulted in two findings in particular that merit additional study:1. In a hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No statistically significant association was found between mobile phone use and acoustic neu-roma. There was also no association between mobile phone use and glio-mas when all types of gliomas were considered together. It should be noted that the average length of mobile phone exposure in this study was less than three years.When 20 types of glioma were con-sidered separately, however, an association was found between mobile phone use and one rare type of glioma, neuroepithelliomatous tumors. It is possible with multiple comparisons of the same sample that this association occurred by chance. Moreover, the risk did not increase with how often the mobile phone was used, or the length of the calls. In fact, the risk actually decreased with cumulative hours of mobile phone use. Most cancer caus-ing agents increase risk with increased exposure. An ongoing study of brain cancers by the
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fm127U.S. FDAVAR Language: American; VAR issue date: 16-Februar-2004left page (127) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)National Cancer Institute is expected to bear on the accuracy and repeat-ability of these results.12. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material. The cells in this assay showed changes after exposure to simulated cell phone radiation, but only after 24 hours of exposure. It is possible that exposing the test cells to radia-tion for this long resulted in heating. Since this assay is known to be sensi-tive to heating, heat alone could have caused the abnormalities to occur. The data already in the litera-ture on the response of the micronu-cleus assay to RF are conflicting. Thus follow-up research is neces-sary. 2FDA is currently working with gov-ernment, industry, and academic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cel-lular Telecommunications Industry Association (CTIA) in particular is expected to lead to FDA providing research recommendations and sci-entific oversight of new CTIA-funded research based on such recommen-dations.Two other studies of interest have been reported recently in the litera-ture:• Two groups of 18 people were exposed to simulated mobile phone signals under laboratory conditions while they performed cognitive function tests. There were no changes in the subjects' ability to recall words, numbers, or pictures, or in their spatial memory, but they were able to make choices more quickly in one visual test when they were exposed to simulated mobile phone signals. This was the only change noted among more than 20 variables compared.3• In a study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, how-ever, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small num-ber of cases, the increased likeli-hood was too small to be statisti-cally significant.4In summary, we do not have enough information at this point to assure the public that there are, or are not,
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fmU.S. FDA128VAR Language: American; VAR issue date: 16-Februar-2004left page (128) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the out-standing questions about the safety of mobile phones.What is known about cases of human cancer that have been reported in users of hand-held mobile phones?Some people who have used mobile phones have been diagnosed with brain cancer. But it is important to understand that this type of cancer also occurs among people who have not used mobile phones. In fact, brain cancer occurs in the U.S. popu-lation at a rate of about 6 new cases per 100,000 people each year. At that rate, assuming 80 million users of mobile phones (a number increas-ing at a rate of about 1 million per month), about 4800 cases of brain cancer would be expected each year among those 80 million people, whether or not they used their phones. Thus it is not possible to tell whether any individual's cancer arose because of the phone, or whether it would have happened anyway. A key question is whether the risk of getting a particular form of cancer is greater among people who use mobile phones than among the rest of the population. One way to answer that question is to com-pare the usage of mobile phones among people with brain cancer with the use of mobile phones among appropriately matched peo-ple without brain cancer. This is called a case-control study. The cur-rent case-control study of brain can-cers by the National Cancer Institute, as well as the follow-up research to be sponsored by industry, will begin to generate this type of information.What is FDA's role concerning the safety of mobile phones?Under the law, FDA does not review the safety of radiation emitting con-sumer products such as mobile phones before marketing, as it does with new drugs or medical devices. However, the agency has authority to take action if mobile phones are shown to emit radiation at a level that is hazardous to the user. In such a case, FDA could require the manu-facturers of mobile phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety. The agency has recom-mended that the industry:• Support needed research into pos-sible biological effects of RF of the type emitted by mobile phones;
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fm129U.S. FDAVAR Language: American; VAR issue date: 16-Februar-2004left page (129) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)• Design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• Cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health.• At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level. These agencies are:• National Institute for Occupa-tional Safety and Health• Environmental Protection Agency• Federal Communications Com-mission• Occupational Health and Safety Administration• National Telecommunications and Information AdministrationThe National Institutes of Health also participates in this group.In the absence of conclusive information about any possible risk, what can con-cerned individuals do?If there is a risk from these products – and at this point we do not know that there is – it is probably very small. But if people are concerned about avoiding even potential risks, there are simple steps they can take to do so. For example, time is a key factor in how much exposure a per-son receives. Those persons who spend long periods of time on their hand-held mobile phones could con-sider holding lengthy conversations on conventional phones and reserv-ing the hand-held models for shorter conversations or for situations when other types of phones are not avail-able.People who must conduct extended conversations in their cars every day could switch to a type of mobile phone that places more distance between their bodies and the source of the RF, since the exposure level drops off dramatically with distance. For example, they could switch to:• a mobile phone in which the antenna is located outside the vehicle,• a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or• a headset with a remote antenna to a mobile phone carried at the waist.Where can I find additional information?For additional information, see the following websites:• Federal Communications Com-mission (FCC) RF Safety Program (select “Information on Human
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fmU.S. FDA130VAR Language: American; VAR issue date: 16-Februar-2004left page (130) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Exposure to RF Fields from Cellular and PCS Radio Transmitters”): http://www.fcc.gov/oet/rfsafety• World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf• United Kingdom, National Radio-logical Protection Board: http://www.nrpb.org.uk• Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com• U.S. Food and Drug Administra-tion (FDA) Center for devices and Radiological Health: http://www.fda.gov/cdhr/consumer/1 Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain Tumors. In: State of the Science Sympo-sium; 1999 June 20; Long Beach, California.2 Tice et al. Tests of mobile phone signals for activity in genotoxicity and other laboratory assays. In: Annual Meeting of the Environ-mental Mutagen Society; March 29, 1999, Washington, DC; and personal communica-tion, unpublished results.3 Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915- MHz simulated mobile phone signal on cognitive function in man. Int. J. Radiat. Biol., April 8, 1999.4 Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular telephones and the risk for brain tumors; a case-control study. Int. J. Oncol, 15: 113-116, 1999.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\FDA.fm131FCC/Industry Canada NoticeVAR Language: American; VAR issue date: 16-Februar-2004left page (131) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)FCC/Industry Canada NoticeYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, please con-tact your local service facility.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Driving_Tips.fmTen driving safety tips132VAR Language: American; VAR issue date: 16-Februar-2004left page (132) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Ten driving safety tipsYour Siemens wireless phone gives you the power to communicate by voice – almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:Get to know your phone and its features such as speed dial and redial.Carefully read your instruction man-ual and learn to take advantage of valuable features most phones offer including, automatic redial and memory dial – most phones can store up to 99 numbers in memory dial. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.When available, use a hands-free device.A number of hands-free wireless phone accessories are readily avail-able today. Whether you choose an installed mounted device for your phone or a speaker phone accessory, take advantage of these devices if they are available to you.Position your phone within easy reach.Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voicemail answer it for you.Suspend conversations during hazard-ous driving conditions or situations.Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazard-ous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.Do not take notes or look up phone numbers while driving.If you are reading an address book or business card while driving a car, or writing a “to do” list, then you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehi-cles.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Driving_Tips.fm133Ten driving safety tipsVAR Language: American; VAR issue date: 16-Februar-2004left page (133) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Dial sensibly and assess the traffic.If possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip, or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip – dial only a few num-bers, check the road and your mir-rors, then continue.Do not engage in stressful or emotional conversations that may be distracting.Stressful or emotional conversations and driving do not mix – they are dis-tracting and even dangerous when you are behind the wheel. Make peo-ple you are talking with aware you are driving and if necessary, suspend phone conversations that have the potential to divert your attention from the road.Use your phone to call for help.Your wireless phone is one of the greatest tools you can own to pro-tect yourself and your family in dan-gerous situations – with your phone at your side, help is only three num-bers away. Dial 9-1-1 in the case of fire, traffic accident, road hazard, or medical emergency. Remember, it is a free call on your wireless phone.Use your phone to help others in emergencies.Your wireless phone provides you a perfect opportunity to be a “good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergen-cies where lives are in danger, call 9-1-1, as you would want others to do for you.Call roadside assistance or a special wireless non-emergency assistance number when necessary.Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call to 9-1-1. But you can still use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless numbers.Provided by the Cellular Telecommunica-tions Industry Association (CTIA)“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1 (888) 901-SAFE, or visit our Web site at: www.wow-com.com
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Intellectual_property.fmIntellectual property134VAR Language: American; VAR issue date: 16-Februar-2004left page (134) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Intellectual property Intellectual Prop-erty RestrictionsAll Intellectual Property, as defined below, which is owned by or other-wise the property of Siemens Infor-mation and Communications Mobile, LLC ("Siemens"), its affili-ates, partners or suppliers, relating to the Phone, including but not lim-ited to accessories, parts or software relating thereto (the “Phone Sys-tem”), is proprietary under federal laws, state laws and International treaty provisions. Intellectual Prop-erty includes, but is not limited to, inventions (patentable or unpatent-able), patents, trade secrets, copy-rights, software, computer pro-grams, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) disassemble, decompile, reverse engineer, prepare derivative works from, modify or make any other effort to create source code from the software. No title to ownership in the Intellectual Property is trans-ferred to you through purchase or possession of the Phone or its com-ponents. All applicable rights of the Intellectual Property shall remain with Siemens, its affiliates, partners or suppliers.Siemens will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with soft-ware, apparatus or devices not fur-nished by Siemens, nor will Siemens have any liability for the use of ancil-lary equipment or software not fur-nished by Siemens which is attached to or used in connection with the Product, The foregoing states the entire liability of Siemens with respect to infringement of patents by the Product or any parts thereof.Laws in the United States and other countries preserve for Siemens cer-tain exclusive rights for copyrighted Siemens software, such as the exclu-sive rights to reproduce and distrib-ute copies of such Siemens software. Siemens software may be used only in the Product in which the software was originally embodied when pur-chased, and such software in such Product may not be replaced, cop-ied, distributed. modified in any way, or used to produce any deriva-tive thereof. No other use including, without limitation, alteration, modi-fication, reproduction, distribution. or reverse engineering of such Siemens software or exercise of rights in such Siemens software is permitted. No license is granted by implication, estoppel or otherwise under Siemens patent rights or copy-rights.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Accessory.fm135AccessoriesVAR Language: American; VAR issue date: 16-Februar-2004left page (135) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)AccessoriesFashion & CarryCarrying CasesA range of carry cases is available at spe-cialist shops or you can visit the Siemens Mobile Store online:EnergyLi-Ion Battery (750 mAh) EBA-660Spare batteryTravel ChargerTravel Charger ETC-500 (EU)Travel Charger ETC-510 (UK)Travel charger with an extended input voltage range of 100 –240 V.Car Charger Plus ECC-600Charger for the cigarette lighter socket in the car. It is possible to make phone calls during charging.Handsfree PortableHeadset PTT HHS-510Headset PTT HHS-610Headset with PTT key to accept and end calls.OfficeData Cable DCA-500For connecting the phone to the serial RS232 port of the PC.Data Cable USB DCA-540For connecting the phone to the USB port of the PC. With charging function.SyncStation DSC-600Table support for the phone to facilitate simultaneous data exchange and phone charging. Contains a desktop stand and a USB data cable.MultitainmentPlug-in Flash IFL-600Plug-in flash module for taking photos in areas with low ambient light.Bike-o-Meter IBS-600The Bike-o-Meter is protected against bumps and splashes and acts both as a phone cradle on the bike and as a powerful bike computer.Original Siemens Accessorieswww.siemens-mobile.com/shop
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_Accessory.fmAccessories136VAR Language: American; VAR issue date: 16-Februar-2004left page (136) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:26)Car Solutions Mobile Holder HMH-680Cradle without antenna port.Mobile Holder HMH-685The cradle for connecting an external antenna. Ideal for use with headset PTT or car kit portable.Can also be used as cradle for retrofitting your handsfree car kit (series 55).Car Kit Comfort HKC-680Handsfree kit with first-class digital call qual-ity and supreme ease of use. Includes all components needed for installation. The individual antenna solution is available in specialist shops.Car Kit Easy HKP-600Facilitates convenient handsfree talking with high call quality. With the integrated, rotating cradle and flexible microphone positioning, the telephone can be optimally adjusted to suit any vehicle interior. The power is sup-plied via the cigarette lighter socket.Optional Car Kit accessoriesCar Data Adapter HKO-690Phone-in Adapter HKO-570Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessorieswww.siemens-mobile.com/shop
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\Quality.fm137QualityVAR Language: American; VAR issue date: 16-Februar-2004left page (137) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)QualityBattery quality declarationThe capacity of your mobile phone battery is reduced each time you charge/discharge it. Storing the bat-tery at temperatures that are too high or too low also causes a gradual loss of capacity. This can signifi-cantly reduce the operating times of your mobile phone, even after it has been fully charged.The battery is, however, designed to be capable of being charged and dis-charged for a period of six months from when the mobile phone was purchased. Following this six-month period, we recommend replacing your battery if you experience a sig-nificant drop in performance. Only purchase original Siemens batteries.Display quality declarationFor technological reasons, a few small dots with different colours may appear in the display in excep-tional cases.Please note that the appearance of brighter or darker dots generally does not mean that a fault has occurred.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\SAR.fmSAR (M65)138VAR Language: American; VAR issue date: 16-Februar-2004left page (138) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)SAR (M65)RF EXPOSURE /SPECIFIC ABSORPTION RATE (SAR) INFORMATIONTHIS SIEMENS M65 PHONE MEETS THE GOVERNMENT'S REQUIRE-MENTS FOR EXPOSURE TO ELECTRO-MAGNETIC FIELDS.Your cell phone is a radio transmitter and receiver. It is designed and man-ufactured not to exceed the emis-sion limits for exposure to radio fre-quency (RF) energy established by the Federal Communications Com-mission (FCC) of the U.S. Govern-ment and by Health Canada. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed and confirmed by inde-pendent scientific organizations through periodic and thorough eval-uation of scientific studies*. The lim-its include a substantial safety mar-gin designed to assure the safety of all persons, regardless of age and health.The exposure standard for cell phones employs a unit of measure-ment known as the Specific Absorp-tion Rate, or SAR. The SAR limit established by the FCC and by Health Canada is 1.6 W/kg**. Tests for SAR are conducted using standard oper-ating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest cer-tified power level in all tested fre-quency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base sta-tion, the lower the power output. Before a phone model is available for sale to the public, it must be tested and the manufacturer must certify to the FCC and Industry Canada that it does not exceed the limit estab-lished by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body), reported to the FCC and available for review by Industry Canada. The highest SAR value for this Siemens M65 when tested for use at the ear is0.75 W/kg***and when worn on the body+ is0.54 W/kg***Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Internet Association (CTIA) web-site at www.phonefacts.net or the Cana-dian Wireless Telecommunications Association (CWTA) website www.cwta.ca
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\SAR.fm139SAR (M65)VAR Language: American; VAR issue date: 16-Februar-2004left page (139) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)SAR information on this Siemens M65 phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID PWX-M65.While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the govern-mental requirements for safe RF exposure. + For body worn operation, this mobile phone has been tested and meets FCC RF exposure guidelines when used with a Sie-mens accessory designated for this product, where available, or when used with a carry accessory that contains no metal and that positions the handset at least 2.2 cm/0.87 in from the body. Use of other carry accesso-ries may not ensure compliance with FCC RF exposure guidelines.* The World Health Organization (WHO, CH-1211 Geneva 27, Switzerland), on the basis of the actual knowledge, does not see any necessity for special precautionary mea-sures when using cell phones.Further information: www.who.int/peh-emfwww.mmfai.orgwww.siemens-mobile.com** averaged over 1 g of tissue.*** SAR values may vary depending on national requirements and network bands. SAR information for different regions can be found at siemens-mobile.com
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MenuTree.fmMenu tree140VAR Language: American; VAR issue date: 16-Februar-2004left page (140) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Menu treeAddress book/Phonebook>Show entries<New entry>Business cardGroupsDefault book<Info numbers>Call records >Missed callsCalls receivedCalls dialedDelete recordsTime/charges >All callsAll incom.callsAll outgoingRemain. unitsCharge setting >CurrencyCharge/UnitSurf & fun >URL/service provider Charge limitGames Auto displayApplicationsDownload wiz.BookmarksInternetCameraMessages >Write message >SMSMMSE-mailInst. Msg.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MenuTree.fm141Menu treeVAR Language: American; VAR issue date: 16-Februar-2004left page (141) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Messages >Inbox >SMSMMSE-mailWAP pushRetrieve emailSend/receiveCB servicesDraft >SMSMMSE-mailUnsent >SMSMMSE-mailRetrieve emailSend/receiveSent items >SMSMMSE-mailMMS templateSMS archiveText modulesMsg settings >Zoom inSMS >SMS profilesSMS signatureMMS >MMS profile:User settingsHelp
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MenuTree.fmMenu tree142VAR Language: American; VAR issue date: 16-Februar-2004left page (142) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Messages >Msg settings >E-mail >AccountsGeneral sett.WAP push set. HelpVoice messageCB services >Receive CBOrganizer >Calendar Topic listAppointments CB languagesTasksNotesMissed appts.Dictation macTime zonesCalend. setupExtras >SIM servicesAlarm clockSound recorderCalc.Unit converterStopwatchCountdownRemote sync.My stuffSetup >ProfilesTopicsDisplay >LanguageText input >T9 preferredWallpaper Input languageLogoColor settingScreensaverStart up anim.Shutdn anim.
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MenuTree.fm143Menu treeVAR Language: American; VAR issue date: 16-Februar-2004left page (143) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup >Display >GreetingLarge lettersIlluminationDynamic lightRing tones >Ringer settingSilent alertVolume >Incoming callMessagesAlarm clockOrganizerSystemApplicationsd CallsGroup callsOther callsMore melodies >MessagesAlarm clockOrganizerStartup melodyShutdown mel.Sound recorderCall setup >Hide IDCall waitingDivert >All callsCall screening Not reachableAny key No replyMinute beep BusyReceiving faxReceiving dataStatus checkClear all
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MenuTree.fmMenu tree144VAR Language: American; VAR issue date: 16-Februar-2004left page (144) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup >Phone setup >Key tonesInfo tonesAutomatic switch offPhone identityMemory assis.File system >FormatMaster reset Clean upClock >Time/dateTime zonesDate formatTime formatBuddhist yearShow clockAuto time zoneConnectivity >GPRSGPRS infoIrDAData servicesHTTP profileAuthenticationFax/data >Send voice/faxRec voice/faxSecurity >Auto key lock Rec fax/dataDirect callOnly ‚Codes >PIN controlThis SIM only Change PINChange PIN2Chg.phonecode
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65_MenuTree.fm145Menu treeVAR Language: American; VAR issue date: 16-Februar-2004left page (145) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Setup >Security >Barring >All outgoingOutgo internatOut.int.x homeAll incomingWhen roamingStatus checkClear all>Network >Line >Select lineNetwork info ProtectedChoose netwrkAuto networkPreferred netBand selectionFast searchUser group >ActiveSelect groupAll outgoingPref. group>Accessories >Car Kit >Auto answerAutomatic switch offCar loudspk.Key assmnt.Headset >Auto answer
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65SIX.fmIndex146VAR Language: American; VAR issue date: 16-Februar-2004left page (146) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)IndexAAccessories............................... 135AddressbookDial entry................................ 37Groups ................................... 38New entry............................... 35Read entry .............................. 37Aircraft mode ............................. 78AlarmAlarm clock........................... 107Type ..................................... 103Alarm clock .............................. 107All calls (diversion) ..................... 86All incoming (barrings) ............... 94Answering service (external)....... 64Any to answer ............................ 86Appointments .......................... 102Authentication ........................... 92Auto displayClock ...................................... 89Duration/charges .................... 43Auto key lock.............................. 93Auto time zone................... 89, 106Auto. network selection.............. 95Auto. redial ................................ 29Automobile accessories ............ 136BBand selection............................ 96BatteryCharge.................................... 15Insert...................................... 13Operating times.............. 15, 124Quality declaration................ 137Big letters................................... 81Bookmarks (WAP) ................. 72, 74Browser...................................... 72Buddh. year................................ 89Business card ..............................34Busy number............................... 29CCalculator ................................. 109Calendar ...................................101CallAccept/end.............................. 30Barring....................................94Charges................................... 43Conference ............................. 31Divert...................................... 85End ......................................... 28Hold........................................ 30Menu ...................................... 32Reject......................................30Swap (change) ........................30Call back .....................................29Call divert ................................... 85Call screening ............................. 86Call transfer ................................ 32Call waiting........................... 31, 85Calling ........................................28Calls dialled (call record) .............42Calls received (call record)...........42Camera.......................................44Car KitAccessories ...........................136Setting....................................97Car kit accessories..................... 136Care of phone ........................... 123Cell Broadcast (CB)......................71Central inbox .............................. 46Charge rate................................. 43Charges ......................................43Charging the battery ................... 15Clock ..........................................89Colour skin..................................80
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65SIX.fm147IndexVAR Language: American; VAR issue date: 16-Februar-2004left page (147) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Conference................................. 31Connection profiles .................... 91Connectivity ............................... 90Contact list ................................. 66Control code (DTMF) .................. 33Converter ................................. 109Countdown .............................. 111Credit limit ................................. 43CSD settings ............................... 91Currency converter ................... 110Customer Care Siemens............ 121DDate format................................ 89Default book .............................. 34Delete assistant .......................... 87Dialling code .............................. 28Dialling with number keys .......... 28Dictating machine .................... 105Digital Rights Management......... 17Direct call ................................... 32Direct reply (SMS)....................... 51DisplayIllumination ............................ 81Language ............................... 80Symbols.................................. 11Divert ......................................... 85Download .................................. 75Driving safety ........................... 132DTMF tones (tone sequences)..... 33Duration/charges ........................ 43Dynamic light ............................. 82EE-mailLists........................................ 62Receive/read ........................... 62Settings .................................. 63Write ...................................... 61Emergency number .................... 16Extras....................................... 107FFast access..................................99Fast search.................................. 96Fax/data mode ............................ 92Flash rhythms .............................82Formatting (phone memory).......88Formatting (SMS text).................47Forwarding (call)......................... 32Frequency range ......................... 96GGames and applications ........ 75, 76GPRS...........................................90Groups........................................38HHandset volume.......................... 28Handsfree talking........................30HeadsetAccessories ...........................135Setting....................................97Hide ID ....................................... 85Highlighting mode ......................20Hold call ............................... 30, 32Home network............................ 95Hotline .....................................121Hotline Siemens........................121HTTP profile ................................91IIdentity number (IMEI) ................87IMEI number ............................... 87Info tones ................................... 87Information services (CB) ............ 71Infrared ......................................90Input language (T9) .................... 24Inst. message..............................65International dialling code........... 29Internet ......................................72IrDA (infrared)............................. 90
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65SIX.fmIndex148VAR Language: American; VAR issue date: 16-Februar-2004left page (148) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)JJoystick ........................................ 9KKey tones ................................... 87LLanguage ........................... 80, 142Limit (call time/charge)............... 43Logo........................................... 80Loss of phone, SIM card............ 124MMailbox ...................................... 64Maintenance of phone.............. 123Master reset ............................... 88Media player ............................ 113MenuControls.................................. 18My menu ................................ 98Speed dialling ......................... 21Menu speed dialling ................... 20Menu tree ................................ 140MessageCB .......................................... 71E-mail..................................... 61MMS....................................... 53SMS.................................. 47, 49Message memory full. ................ 52Message type ............................. 51Microphone on/off................ 32, 45Minute beep............................... 86Missed appointments ............... 104Missed calls (call record)............. 42MMSLists........................................ 58Receive................................... 57Send....................................... 56Write ...................................... 53Mobile Phone Manager............. 116Muting (microphone) ........... 32, 45My menu ....................................98My phone ...................................27My stuff .................................... 114NNetworkBarring....................................94Connection ............................. 95Settings .................................. 95Notes........................................104OOne number only........................ 32Only ‚.....................................93Operating times (battery).... 15, 124Organiser..................................101Own (phone) numbers................ 41Own greeting..............................81PPhone code................................. 21Phone data ...............................124Phone identity number (IMEI)......87Phone number memo .................29Phone number transmission on/off..85Phone setup................................87PhonebookCall an entry............................40New entry ............................... 39Protected SIM.......................... 41Special books ..........................41VIP numbers............................ 41Photo.......................................... 44Pictures & sounds (SMS).............. 48PINChange ...................................21Control....................................21Enter....................................... 16Error ..................................... 120PIN2 ...........................................21
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65SIX.fm149IndexVAR Language: American; VAR issue date: 16-Februar-2004left page (149) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)Preferred network....................... 95Preventing accidental activation . 22Product data............................. 124ProfilesMMS....................................... 59Phone..................................... 77SMS........................................ 51WAP ....................................... 73Prompt....................................... 29Provider logo.............................. 80PUK, PUK2 .................................. 21QQuestions & Answers................ 118RRecords ...................................... 42Redial......................................... 28Reminder ................................... 29Remote synchronisation ........... 111Ringtone setting ......................... 83Ringtones............................. 38, 83Rubber gasket (battery cover) ..... 13SSafety precautions........................ 3Screensaver................................ 80Second phone number ............... 95Security...................................... 21Security codes ............................ 21Service centre (SMS)................... 51Service supplier portal ................ 27Service tones.............................. 87Set time/date.............................. 89Setup ......................................... 77Short message (SMS).................. 47Shown in the display .................. 11Shut down animation ................. 81Siemens City Portal..................... 27Siemens service phone numbers121Signal strength ........................... 17Silent alert .................................. 83SIM cardClear barring ...........................22Insert ......................................13Problems...............................118SIM services (optional) .............. 107SMSArchive ...................................50Lists ........................................50Profiles.................................... 51Read .......................................49Setup ...................................... 51Signature ................................51T9 input .................................. 24To group .................................48Write....................................... 47SMS push....................................46Software version......................... 87SOS ........................................ 8, 16Sound.......................................108Sound recorder ......................... 108Special books ..............................41Special characters .......................23Speech time (battery) ...............124Speed dialling keys....................100Standard functions......................19Standby mode ............................18Standby time ...................... 15, 124Start up animation ...................... 81Stopwatch ................................110Storage location (Phonebook) .....39Surf & fun ...................................72Swap ..........................................30Switch off phoneAutomatic ............................... 87Manually................................. 16Switch on phone......................... 16Symbols...................................... 11Synchronisation ........................ 111
© Siemens AG 2003, M:\Mobil\R65\M65_X-cite\am\fug\_von_itl\M65SIX.fmIndex150VAR Language: American; VAR issue date: 16-Februar-2004left page (150) of M65 X-Cite FUG us, A31008-H7150-A40-1-4A19 (14.04.2004, 17:30)TT9 text entry............................... 24Tasks........................................ 103Technical data .......................... 124Text entryWith T9................................... 24Without T9 ............................. 23Text modules.............................. 26This SIM only.............................. 93Time zones....................16, 89, 106Topics ........................................ 79UUnanswered............................... 85Unit converter .......................... 109Upper and lowercase letters (T9) 23User group ................................. 96VValidity, SMS .............................. 51Video mode................................ 45Voice message (mailbox) ............ 64VolumeHandset volume...................... 28Profiles ................................... 77Ringtone................................. 83WWallpaper (display)..................... 80WAP ........................................... 72

Navigation menu