BenQ Mobile and OHG S75 GSM 900/1800/1900 Mobile Phone with BT User Manual MINOS FUG

BenQ Mobile GmbH & Co. OHG GSM 900/1800/1900 Mobile Phone with BT MINOS FUG

User Manual

Table of Contents 1
See also Index at the end of this User Guide
right page (1) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Legal notices .............................. 3
Safety precautions ..................... 5
Antenna care ........................... 7
Phone operation ...................... 7
Phone overview ....................... 12
Display symbols ....................... 14
Getting started ......................... 16
Inserting SIM card/
battery ................................... 16
RS MultiMediaCard™ .............. 17
Charging the battery .............. 18
Switching on/off, PIN entry ...... 20
General instructions ................ 21
Standby mode ....................... 21
Receiving signal ..................... 21
Digital Rights Mgmt. (DRM) .... 21
Main menu ............................ 22
Tabs ...................................... 22
Menu controls ........................ 23
Centre key ............................. 23
Standard functions ................. 24
Security .................................... 25
Text input ................................. 27
Calling ...................................... 31
Ending a call .......................... 31
Setting the volume ................ 31
Accept call ............................. 32
Rejecting a call ....................... 32
Handsfree .............................. 33
Swapping between 2 calls ...... 33
Conference ............................ 34
Call options ............................ 35
Direct call ............................... 35
Tone sequences (DTMF) ......... 36
Contacts .................................... 37
All contacts ............................ 37
Groups ................................... 38
Online status ..........................38
SIM ........................................ 39
Filter ......................................39
General options ......................40
Call records ............................... 42
Time/charges ............................ 43
Camera ..................................... 44
SMS/MMS .................................. 47
Writing an SMS ....................... 47
Writing an MMS ......................49
Receive .................................. 50
Reading ..................................51
Draft ......................................52
Outbox ...................................52
Sent ....................................... 52
Archive ...................................52
Templates .............................. 52
SMS settings ...........................52
MMS settings ......................... 54
Save aft. send ......................... 55
Zoom in .................................55
Emoticons ..............................55
E-mail ........................................ 56
Writing/sending ...................... 56
Receiving/reading ...................57
Draft ......................................58
Archive ...................................58
Setting ...................................58
WAP push ................................. 60
Table of
Contents
See also In-
dex at the end
of this User
Guide
2 Table of Contents
See also Index at the end of this User Guide
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (2) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Chat room ................................ 61
Voice mailbox/Mailbox ............ 66
CB services ............................... 67
Internet .................................... 68
Settings .................................... 71
Profiles .................................. 71
Ringtones .............................. 73
Topics .................................... 74
Display ................................... 75
Silent alert ............................. 76
Phone Pilot ............................ 77
Connectivity .......................... 78
Shortcuts ............................... 83
Call setup ............................... 85
Phone setup ........................... 87
Clock ..................................... 90
Security ................................. 91
Network ................................ 93
Accessories ............................ 95
Organizer ................................. 97
Calendar ................................ 97
Appointments ........................ 98
Tasks ................................... 100
Notes ................................... 100
Dictat.machine .................... 101
Time zones .......................... 102
Remote synchronisation ....... 103
Extras ...................................... 105
SIM services (optional) .........105
My applications ....................105
Calculator ............................. 105
Unit converter ...................... 106
Online status ........................ 107
Sound recorder ..................... 109
Stopwatch ............................ 110
Countdown .......................... 110
Date calculator ..................... 111
My menu ..............................111
Alarm clock ............................. 112
Media player ........................... 113
My stuff .................................. 116
Mobile Phone Manager .......... 119
Questions & Answers ............. 122
Customer Care ........................ 126
Care and maintenance ........... 128
Product data ........................... 129
Accessories ............................. 130
SAR ........................................ 132
U.S. FDA .................................. 133
Ten Driving Safety Tips ........... 140
Intellectual property .............. 142
End user
license agreement .................. 143
Menu tree ............................... 148
Index ....................................... 154
See also In-
dex at the end
of this User
Guide
3Legal notices
right page (3) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Legal notices
The mobile phone described in this guide is approved for use on the GSM and
GPRS networks operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS)
bands. It is approved for use in the country where it was originally sold and
may be approved for use in other countries.
© 2005 Siemens Information and Communication Mobile, LLC.
All rights reserved.
Siemens and the S75 model phone
are trademarks or registered trade-
marks of Siemens AG and/or its affili-
ates in the United States and/or oth-
er countries.
T9® is a registered trademark of Amer-
ica Online, Inc. in the United States.
Java and all Java-based trademarks
and logos are trademarks or registered
trademarks of Sun Microsystems, Inc.
in the U.S and other countries. The
names of actual companies and prod-
ucts mentioned herein may be the
trademarks of their respective owners.
Disclaimer
The information contained in the User
Guide is written for the S75 phone.
Siemens reserves the right to make
changes and improvements to the
products and any of the features of the
products described in this document
without prior notice. The contents of
the user guide are provided "AS IS". Ex-
cept as required by applicable law, no
warranties of any kind, either express
or implied, including, but not limited
to, the implied warranties of mer-
chantability and fitness for a particular
purpose, are made in relation to the
accuracy, reliability or contents of this
document. Siemens reserves the right
to revise the user guide or withdraw it
at any time without prior notice. Un-
der no circumstances shall Siemens be
responsible for any loss of data or in-
come or any special, incidental, conse-
quential or indirect damages howso-
ever caused.
Export Information
The mobile phone may be subject to
export regulation of the United States
and other countries. Diversion contra-
ry to law is prohibited. You must com-
ply with all applicable export laws, re-
strictions and regulations of the
United States foreign agencies or au-
thorities, and may not export, or trans-
fer for the purpose of re-export, the
mobile phone or any part of the phone
in violation of any applicable restric-
tions, laws or regulations, or without
all necessary approvals.
Legal notices4
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (4) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Network Services
A number of features included in this
guide are called Network Services.
They are special services provided by
wireless service providers. In order
to use any of these Network Servic-
es, you must subscribe to these serv-
ice(s) from your service provider and
obtain instructions for their use.
Some of these Network Services may
not be available when roaming on a
network other than your home
network.
Standby and
Talk Time Information
The mobile phone incorporates fea-
tures that are new to the mobile
phone world. These may include
color displays and lighting, graphic
games, music reproduction and
browsing the Internet. The way you
use the display and the features will
affect the performance of the bat-
tery and how long it lasts between
charge cycles. The quoted standby
times and talk times show the mini-
mum and maximum performance
that can be expected from the bat-
tery under normal network condi-
tions and with the default settings as
set by the factory. However, playing
games (particularly with the back-
light continuously switched on) and
listening to music will shorten the
time available for standby and to
make and receive telephone calls.
Operation times also vary depending
on network conditions, SIM settings,
charging and battery condition, how
you use your phone and other
factors.
Memory
The mobile phone contains an inter-
nal memory device that stores the
software required to operate the
mobile phone, communicate with
the GSM/GPRS network and provide
the user interface. Some features in
the internal memory run additional
devices and some additional games
and utilities. The amount of memory
available in the mobile phone is fi-
nite and may be insufficient to store
large numbers of applications and
files.
Warning!
Remember to back up your data and to do
so frequently. Always back up all data and
programs before sending the mobile phone
in for repair.
5Safety precautions
right page (5) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal
requirements and local restric-
tions when using the phone.
For example in aeroplanes,
petrol stations, hospitals or
while driving.
Cellular phones can interfere
with the functioning of medical
devices such as hearing aids
or pacemakers. Keep at least
8 inches (21 cm) between
phone and pacemaker. When
using the cell phone hold it to
the ear which is farthest from
the pacemaker. For more infor-
mation consult your doctor.
The ringtone (p. 73), info tones
(p. 87) and speakerphone talk-
ing are reproduced through the
loudspeaker. Do not hold the
phone to your ear when it rings
or when you have switched on
the speakerphone function
(p. 33). Otherwise you risk seri-
ous, permanent damage to
your hearing.
Only use original Siemens bat-
teries (100 % mercury-free)
and – charging devices. Other-
wise you risk serious damage
to health and property. The bat-
tery could explode, for instance.
Small parts such as the SIM
card, sealing stop, lens ring
and lens cap can be disman-
tled and swallowed by small
children. The phone must
therefore be stored out of the
reach of small children.
The mains voltage specified on
the power supply unit (V) must
not be exceeded. Otherwise
the charging device may be de-
stroyed.
The power supply must be
plugged into an easily accessi-
ble AC mains power socket
when charging the battery. The
only way to turn off the charg-
ing device after charging the
battery is to unplug it.
Do not use a handheld while
driving.
Do not look at the LED (e.g. ac-
tivated infrared port, flash LED)
with optical magnifiers because
of the risk of radiation.
This product complies with
IEC/EN 60825-1 2 2Safety of
Laser Products2 for LED
Class 1M products; such prod-
ucts are safe under reasonably
foresee-able operating condi-
tions.
Safety precautions6
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (6) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Bluetooth®
Your phone has a Bluetooth interface. This
makes it possible to establish a wireless
connection of your phone with a headset of
a car kit, or with other Bluetooth-enabled
devices.
In order to establish a secure link between
the devices and to prevent a third party from
having access to your phone, you should ob-
serve the following points:
The initial connection between two devic-
es, what is called "pairing", should take
place in familiar surroundings.
Both devices must be able to identify
themselves one time by using a pass-
word/PIN. To ensure sufficient security,
you should choose a 16-digit number com-
bination for a password that would be diffi-
cult to guess (if a PIN has not been
assigned).
An automatic connection acceptance
("connection without confirmation") should
only be used in exceptional cases.
In general, only trustworthy devices should
be linked in order to minimize security
risks.
You should restrict the "visibility" of your
phone if possible. This will make it much
more difficult for unknown devices to es-
tablish a connection with your phone. To
do this, in the Bluetooth menu, set the op-
tion Visib.to others of Always visible to
Not visible (page 81).
Do not place the phone near to
electromagnetic data carriers
such as credit cards and floppy
disks. Information stored on
them could be lost.
You may only open the phone
to replace the battery (100 %
mercury-free) or SIM card. You
must not open the battery un-
der any circumstances. All oth-
er changes to this device are
strictly prohibited and will inval-
idate the guarantee.
Important:
Please dispose of unwanted
batteries and phones as per-
mitted by the laws in your
country.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
Use only Siemens original ac-
cessories. This will avoid po-
tential risks to health or
property and ensure compli-
ance with all relevant
regulations.
Improper use will invalidate the guarantee!
These safety instructions also apply to
Siemens original accessories.
Product attributes are subject to changes in
technology, design and availability.
Siemens reserves the right to modify prod-
ucts without prior notice.
This cellular phone offers a range of func-
tions, it can be used in positions other than
the head, such as on the body. In this case,
separation distance of 1.5 cm is required.
When a carry case, belt clip or holder is used
for body-worn operation, it should not contain
metal and should position the device the
above-stated distance from your body.
7Safety precautions
right page (7) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
The name of your phone is transmitted in
a Bluetooth connection. The factory de-
fault is the "Bluetooth ID". The first time
Bluetooth is activated, or later in the
Bluetooth menu, you can change this
name (My BT name, page 81).
If Bluetooth is not needed, this function
should be deactivated.
Before using Bluetooth accessories, or a
mobile phone inside a vehicle, check the ve-
hicle user guide for any limitations on the use
of these products. Antenna care
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attach-
ments could damage the phone and
may violate FCC regulations.
Phone operation
Normal position
Hold the phone as you would any
other telephone with the antenna
pointed up and over your shoulder.
Tips on efficient operation
For your phone to operate most
efficiently:
Extend your antenna fully
(if applicable).
Do not touch the antenna unnec-
essarily when the phone is in use.
Contact with the antenna affects
call quality and may cause the
phone to operate at a higher pow-
er level than otherwise needed.
Important
Read this information before using
your wireless handheld phone.
As this mobile phone is equipped
with a fixed (non-retractable) an-
tenna, some paragraphs in the text
below may not be applicable.
Safety precautions8
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (8) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Driving
Laws pertaining to the use of mobile
phones while driving vary significantly
from state to state and sometimes
even from locality to locality within
states. For example, some areas may
allow persons to use their mobile
phones only if they employ a hands-
free device, and some areas may
prohibit the use of cell phones
entirely. Accordingly, Siemens recom-
mends that persons check the laws for
the areas in which they drive or will be
driving. For areas where the use of
mobile phones while driving is permit-
ted, Siemens encourages persons to
use their phones responsibly and to
employ hands-free devices. Also, if us-
ing your phone while driving, please:
Give full attention to driving –
driving safely is your first
responsibility;
Use hands-free operation, if
available;
Pull off the road and park before
making or answering a call, if
driving conditions so require.
For vehicles equipped with
air bags
An air bag inflates with great force.
DO NOT place objects, including either
installed or portable wireless equip-
ment, in the area over the air bag or in
the air bag deployment area. If in-vehi-
cle wireless equipment is improperly
installed and the air bag inflates, seri-
ous injury could result.
Electronic devices
Most modern electronic equipment
is shielded from radio frequency (RF)
signals. However, certain electronic
equipment may not be shielded
against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers'
Association recommends that a mini-
mum separation of six inches (6")
be maintained between a handheld
wireless phone and a pacemaker to
avoid potential interference with the
pacemaker. These recommendations
are consistent with the independent
research by and recommendations of
Wireless Technology Research.
Persons with pacemakers
should ALWAYS keep the phone
more than six inches from their
pacemaker when the phone is
turned ON;
should not carry the phone in a
breast pocket;
9Safety precautions
right page (9) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
should use the ear opposite the
pacemaker to minimize the poten-
tial for interference;
should turn the phone OFF imme-
diately if there is any reason to
suspect that interference is taking
place.
Hearing aids
Some digital wireless phones may
interfere with some hearing aids. In
the event of such interference, you
may want to consult your service
provider or your hearing aid manu-
facturer to discuss alternatives.
Other medical devices
If you use any other personal medi-
cal devices, consult the manufactur-
ers of your devices to determine if
they are adequately shielded from
external RF energy. Your physician
may be able to assist you in obtain-
ing this information.
Turn your phone OFF in health care
facilities when any regulations post-
ed in these areas instruct you to do
so. Hospitals or health care facilities
may be using equipment that could
be sensitive to external RF energy.
Vehicles
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles.
Check with the manufacturer or its
representative regarding your vehi-
cle. You should also consult the
manufacturer of any equipment that
has been added to your vehicle.
Posted facilities
Turn your phone OFF in any facility
where posted notices so require.
Airplanes
FCC and Airline Regulations prohibit
using your phone while in the air.
Turn your phone OFF when request-
ed by the airline.
Check and comply with the policy of
your airline regarding the use of your
phone while the airplane is on the
ground.
Blasting areas
To avoid interfering with blasting op-
erations, turn your phone OFF when
in a “blasting area” or in areas post-
ed: “Turn off two-way radio.” Obey
all signs and instructions.
Safety precautions10
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (10) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Potentially explosive
atmospheres
Turn your phone OFF when in any
area with a potentially explosive
atmosphere and obey all signs and in-
structions. Sparks in such areas could
cause an explosion or fire resulting in
bodily injury or even death.
Areas with a potentially explosive at-
mosphere are often but not always
clearly marked. They include: fueling
areas such as gasoline stations; below
deck on boats; fuel or chemical trans-
fer or storage facilities; vehicles using
liquefied petroleum gas (such as pro-
pane or butane); areas where the air
contains chemicals or particles, such
as grain, dust or metal powders; and
any other area where you would nor-
mally be advised to turn off your vehi-
cle engine.
Emergency calls (SOS)
Your wireless phone can be used
to make emergency calls. You can
make an emergency call from the
main display screen. Enter the local
emergency number such as 911 and
then press the A key.
This phone, like any wireless phone,
operates using radio signals, wire-
less and landline networks, and user-
programmed functions. Because of
this, connections in all conditions
cannot be guaranteed. Therefore,
you should never rely solely on any
wireless phone for essential commu-
nications (for example, medical
emergencies). Remember – to make
or receive any calls, the phone must
be switched on and be used in a ser-
vice area that has adequate signal
strength. Emergency calls might not
be possible on all wireless phone
networks or when certain network
services or phone features are in use.
Check with local service providers re-
garding their network features.
11Safety precautions
right page (11) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Always make certain that your
phone is properly charged before
attempting any emergency calls. If
you allow your battery to discharge,
you will be unable to receive or make
calls, including emergency calls. You
must then wait a few minutes after
the charging begins to place any
emergency calls.
When making an emergency call,
remember to give all of the neces-
sary information as accurately as
possible. Remember that your wire-
less phone might be the only means
of communication at the scene of an
accident, therefore you should not
terminate the call until given permis-
sion to do so.
Batteries and Chargers
Only use original Siemens batteries
(100% mercury-free) and charging
devices. Use of non-Siemens batter-
ies and/or charging devices may
cause explosion resulting in serious
injury and/or property damage. Use
original Siemens accessories in order
to avoid possible injury and property
damage and to ensure compliance
with applicable laws and regula-
tions. Improper use invalidates the
warranty.
Battery safety precautions
To reduce the risk of fire, injury or
electric shock, and to properly dis-
pose of batteries, please read and
understand the following instruc-
tions. CONTAINS LITHIUM-ION OR
NICKEL-METAL HYDRIDE BATTERY.
BATTERY MUST BE RECYCLED OR DIS-
POSED OF PROPERLY. DO NOT DIS-
POSE IN MUNICIPAL WASTE.
1. Only use the batteries specified
for use with this mobile phone.
2. Do not use batteries of different
sizes or from different manufac-
turers in this mobile phone.
3. Do not dispose of the battery in a
fire; it may explode. Dispose of
used batteries and phones in
accordance with applicable laws
and safety regulations. Do not
expose battery to water. Check
with local codes for special dis-
posal instructions.
4. Do not open or mutilate the bat-
tery. Doing so may cause damage
to the eyes or skin.
5. Exercise care in handling the bat-
tery in order not to short the bat-
tery with conducting materials
such as rings, bracelets, and keys.
The battery or conducting mate-
rial may overheat and cause burns
or fire.
6. Charge the battery provided with,
or identified for use with, this
product only in accordance with
the instructions and limitations
specified in the User's Guide. Do
not attempt to charge the battery
by any means other than those
specified in the User's Guide.
Phone overview12
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (12) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Phone overview
1 Softkeys
The current functions of these keys are
shown as §text§/symbol (e.g. p).
2 A Call key
Dial displayed/highlighted phone num-
bers/names, take calls. In standby
mode, show last phone numbers
dialled.
3 B On/Off/End key
Switched off: press to switch on.
During a conversation or in an appli-
cation: press briefly to end.
In menus: return to standby mode.
In standby mode:
press and hold to switch off the
phone; press briefly: switch-off
menu.
4 Media player key
Direct number for the media player.
5 Wildcard key
Key for Internet access unless other-
wise preconfigured.
6 Centre key
í Press the centre key to open the
main menu and to start an appli-
cation or function (page 23).
7 Navigation keys
In standby mode:
G Open user profiles.
H Open contacts.
E Open inbox.
D Start the camera.
In lists, messages and menus:
I Scroll upwards/downwards.
During the conversation:
H Open Contacts.
á £ ß
01.05.2005 10:10
Service provider
Inbox íNew SMS
13Phone overview
right page (13) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
1 Integrated antenna
2 Loudspeaker
3 X Camera key
4 Y Media player activated:
Play/pause.
Media player deactivated:
Play.
5 [ / \ Volume control
6 Display
7 Infrared interface (IrDA)
8 * Ringtone
•Press and hold in standby mode:
switch all acoustic signals on/off
(except alarm clock).
Press and hold on incoming call:
switch off ringtone for this call only.
9 # Key lock
Press and hold in standby mode:
activate/deactivate key lock.
: Plug socket
! Slot for RS MultiMediaCard
1 Car Kit holder
2 Flash/torch
X Press and hold X key:
switch torch on/off.
3 Connection for external antenna
4 Camera lens
5 Mirror
á £ ß
01.05.2005 10:10
Service provider
Inbox íNew SMS
Display symbols14
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (14) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Display symbols
Display symbols (selection)
á Signal strength
à Charging
Þ Battery charge level, e.g. 50 %
L Contacts
P Call records
O Internet/Service provider portal
W Games
Q Organizer
M Messages
R Camera
S Extras
V Media player
N My stuff
U Alarm clock
T Settings
Ç All calls are diverted
½ Ringer (beep) off
¹ Alarm set
Ä Keypad locked
T9Abc Text input with T9
£ Activated and available
¢ Registered
¤ Temporarily interrupted
± Browser offline
² Browser is being connected
³ Browser online via GPRS
´ No network (Internet)
¯ IrDA activated
® IrDA transmission
¨ Bluetooth activated.
© Bluetooth visible to others
« Bluetooth during data
transmission
ª Call accepted on Bluetooth
device
15Display symbols
right page (15) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Events (selection)
å SMS memory full
æ MMS memory full
ç Phone memory full
Æ No network access
¿ Inbox
Ê Memory assistant
Message symbols (selection)
m Unread
n Read
o Draft
p Sent
q MMS not sent
r MMS notification received
t MMS with DRM contents
(page 21)
u E-mail forwarded
v E-mail with attachment
l Voice mail received
Camera symbols
Ú Zoom factor
Û White balance
Ø Flash activated
Getting started16
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (16) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Getting started
Your phone's display is covered with
a protective film. Remove this before
using the phone.
Inserting SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
Place the SIM card in front of the
slot with the contacts facing
downwards. Then push the SIM
card fully into the holder using
gentle pressure 1. Ensure that
the chamfered corner is in the cor-
rect position.
Insert the battery sideways into
the phone 2, then press it down-
wards 3 until it engages.
To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
In rare cases static
discharge can
cause temporary
discoloration in
the display.
However, this
will disappear
within approx.
10 minutes.
1
3
2
17Getting started
right page (17) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Insert the battery cover beneath
the camera lens 4 with the re-
taining lugs at the top, and then
press down at the back 5 until it
clicks into place.
To remove, lift the battery cover
up and off 6.
RS MultiMediaCard™
To insert, lay the card in the carry-
ing tray 1 (ensure that the cham-
fered corner is in the correct
position). Push the carrying tray
with the card into the phone until
it clicks into place 2.
Press the small button to remove
3 (e.g. with a pin). The card tray
will pop out a little and you can
remove it.
Before removing the
RS MultiMediaCard, call up the
Eject card function in the options
menu for My stuff. This saves data
you have not yet saved and avoids
losing data.
Additional information
Please switch off your phone before re-
moving the battery!
1.8 and 3 volt SIM cards are supported.
Please contact your service provider if you
have a different card.
45
6
2
1
3
Getting started18
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (18) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Charging the battery
Charging
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours (for charging via
USB, see page 96). Do not interrupt
the charging procedure
prematurely.
àDisplay when charging is
in progress.
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible within a temperature range
of +5°C to +45°C (+41°F to +113°F)
If the temperature rises/falls 5°C
above/below this, i.e drops to 32°F
or rises to 122°F, the charge symbol
flashes a warning. The mains voltage
specified on the power supply unit
must not be exceeded.
Operating time
The operating time depends upon
the respective conditions of use.
Extreme temperatures considerably
reduce the phone’s standby time.
You should therefore avoid the leav-
ing the phone in the sun or on a
radiator.
Talktime: up to 300 minutes
Standby time: up to 300 hours
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immedi-
ately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit
included in delivery!
Display during operation
Charge level display during
operation (empty–full):
Ý Þ ß
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly af-
ter an uninterrupted charging/dis-
charging cycle. You should therefore
not remove the battery unnecessarily
and where possible not terminate the
charging process before completion.
19Getting started
right page (19) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.
Switching on/off, PIN entry20
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (20) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Switching on/off, PIN entry
Switching on/off
BPress and hold the
On/Off/End key.
Entering PIN
The SIM card can be protected with a
4to 8-digit PIN.
JEnter the PIN using the
number keys. The charac-
ters **** appear in the
display to ensure nobody
can read your PIN. Correct
with ].
§OK§ Press the left softkey to
confirm. Logging on to
the network will take a
few seconds.
Emergency number
(SOS)
Only to be used in real emergencies!
By pressing the left softkey §SOS§ you
can make an emergency call on any
network without a SIM card and with-
out entering a PIN (not available in
all countries).
Switching your phone on
for the first time
Time/date
Set the clock correctly once when
getting started.
ìConfirm.
ñStart entry.
JFirst enter the date
(day/month/year), then
the time (24 hours, in-
cluding seconds).
ìConfirm. The time and
date are updated.
Time zones
ISelect the city in the de-
sired time zone.
ìConfirm.
Additional information
Changing the PIN.........................page 25
Clearing SIM card barring ............page 26
21General instructions
right page (21) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
General instructions
Standby mode
The phone is in standby mode and is
ready for use when the name of the
service provider appears on the
display.
BPress the On/Off/End key
to return to standby mode
from any situation.
Receiving signal
áStrong receiving signal.
âA weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
Digital Rights Mgmt.
(DRM)
Remember that your phone has Dig-
ital Rights Management. The use of
downloaded pictures, sounds or ap-
plications can be restricted by the
suppliers, e.g. copy protection, use
for a limited period of time only,
number of times it can be used etc.
(page 88).
User guide
Symbols
The following symbols are used to
explain operation:
J Enter numbers or letters.
B On/Off/End key
A Call key
<> Softkeys
§Menu§ Displays a soft-key
function.
C Press the centre key, e.g.,
to call up the menu.
D F E
H I G
Press the navigation key
on the side marked with a
triangle.
= Function dependent on
service provider. May re-
quire special registration.
General instructions22
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (22) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Main menu
The applications are shown with
symbols in the main menu:
íCall up from standby
mode using the
centre key.
F/ISelect application with
the navigation key.
ìStart application.
Main menu options
§Options§ Open menu.
Tabs
The handy tabs offer you fast access
to information and functions.
Navigation
FSwitch between the indi-
vidual tabs.
If an input field is activated on a tab,
it is only possible to navigate within
the field using the navigation key.
ITo switch to the next tab,
quit the input fields by
scrolling up or down.
Search List output of the menu. En-
tering letters will access a
function directly.
Large font Select one of two font
sizes.
Lighting Set display light brighter/
darker.
Eject card Starts data backup before
the RS MultiMediaCard is
removed.
Help Display a help text.
23
13
12
23General instructions
right page (23) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Menu controls
The steps needed to reach a function
are shown in a condensed form in the
user guide, e.g. to display record of
missed calls in condensed form:
C¢P¢Calls dialed
This comprises the following steps:
íPressing the centre key
opens the main menu in
standby mode.
GSelect the record
application P.
ìConfirm with the
centre key.
HSelect the
Calls dialed function.
ìConfirm with the
centre key.
Centre key
The symbol in the centre of the low-
er line of the display shows the cur-
rent function when the centre key is
pressed.
íMain menu
ìOK, confirm
ñChange
ðCall
üEdit
÷Insert
úOptions
ùCamera
ýSend
öView
ûSave
òPlay
ôRecord
óPause
õStop
øZoom
General instructions24
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (24) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Standard functions
Option menus
Functions which appear repeatedly
in the options menu are listed here.
§Options§ Open menu.
Printing via USB
This Mobile Printing Ready product is
designed to provide easy printing
from mobile phones by connecting
the mobile phone with a USB data
cable to the printer.
This product follows the guidelines
Version 1.0 for PictBridge from Mo-
bile Imaging and Printing Consorti-
um (MIPC).
Highlighting mode
For some applications (e.g. deleting
several SMS messages) you can
highlight several entries on the tab
in order to perform multiple func-
tions at once.
§Options§ Open menu.
Mark text Activate highlighting
mode.
ISelect entry/entries.
ñHighlight or remove
highlighting.
Additional highlighting functions:
§Options§ Open menu.
Edit Open the entry to edit.
View Display entry.
Delete Delete entry.
New entry Create new entry.
SendöSelect transmission service
and medium for sending.
PrintöPrintout on a suitable termi-
nal via IrDA, Bluetooth or
USB.
Reply/
Reply to all The sender becomes the
recipient, "Re:" is placed
before the subject, and the
received text is transferred
into the new message.
Save Store entry.
Save to ªSave recipient in Contacts.
Sort Set sort criteria
(alphabetical, type, time).
Rename Rename selected entry.
Capacity Display memory capacity.
Import Device ready to receive da-
ta (vcard, vcal, vnotes) via
IrDa or Bluetooth.
Attributes Display properties of the
highlighted object.
Help Display help text.
Mark all Highlight all entries.
Deselect all Delete highlighting on all
marked entries.
Delete
marked All highlighted entries are
deleted.
25Security
right page (25) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Security
The phone and SIM card are protect-
ed against misuse by several security
codes.
PIN code
C¢T¢Security
¢PIN code
¢Select function.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not per-
mit deactivating the control.
ñEdit.
JEnter PIN.
ìConfirm entry.
Change PIN
You can change the PIN to any
4 to 8-digit number you find easier
to remember.
ñEdit.
JEnter current PIN.
ìConfirm.
J,ìEnter new PIN.
J,ìRepeat new PIN.
Keep these security codes in a safe
place where you can access them again
if required.
PIN Protects your SIM card
(personal identification
number).
PIN2 This is needed to set the
charge detail display and to
access additional functions on
special SIM cards.
PUK
PUK2 Key code. Used to unlock SIM
cards after the wrong PIN has
been entered repeatedly.
Phone
code Protects your phone. Must be
entered at the first security
setting.
Security26
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (26) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
C¢T¢Security
¢PIN code
¢Select function.
Change PIN2
Proceed as for Change PIN.
Chg.phonecode
(Change phone code)
You define the phone code
(4 to 8-digit number) the first time
you call up a phone-code protected
function (e.g. Direct call, page 91).
It is then valid for all phone-code
protected functions.
Following the third incorrect at-
tempt, access to the phone code and
the functions that use it is denied. If
this happens please contact Siemens
Service (page 126).
Clearing SIM card
barrings
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the
SIM card in accordance with the in-
structions. If the PUK (MASTER PIN)
has been lost, please contact your
service provider.
Preventing accidental
activation
Even if PIN use is deactivated
(page 20) confirmation is required
to switch on the phone.
This prevents the phone from being
switched on accidentally, e. g. when
carried in a pocket or whilst you are
on an aircraft.
BPress and hold.
§OK§ Press. The phone
switches on.
§Cancel§ Press (or no further input)
to stop switch-on proce-
dure. The phone does not
switch on.
Connection with PCs
You can connect your phone to a PC
using Bluetooth, an IrDA link, or a da-
ta cable (accessories). The PC pro-
gram MPM (Mobile Phone Manager)
enables you to store data on your PC
and, for example, synchronise the
Addressbook with Outlook®,
Lotus Notes™ and other Siemens
phones (including Gigaset). You will
find Mobile Phone Manager on the
CD-ROM supplied or you can down-
load it from the Internet at:
www.siemens.com/s75
27Text input
right page (27) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Text input
Text input without T9
Press the number key repeatedly un-
til the required character appears.
After a brief interval the cursor will
advance. Example:
2Press once briefly to write
the letter a, twice to write
b etc.
Press and hold to write the
number.
Ä, ä, 1–9 Umlauts and numbers
are displayed after the
relevant letters.
]Press briefly to delete the
letter before the cursor,
press and hold to erase the
whole word.
FMove the cursor
(forward/back).
#Press briefly: swap be-
tween abc, Abc, T9abc,
T9Abc, 123. Status shown
in top line of the display.
Press and hold: all input
variants are displayed.
*Press briefly: special char-
acters are displayed.
Press and hold: open text
input menu.
0Press once/repeatedly:
. , ? ! ’ " 0 + - ( ) @ / : _
Press and hold: write 0.
1Inserts a space. Press
twice = line break.
Special characters
*Press briefly. The symbols
chart is displayed:
1) Line break
I/FScroll to a character.
ìConfirm.
1)¿¡_;.,?!
+- " : */()
¤¥$£€@\ &#
[ ] { } %~<=>
|^` § Γ Θ Λ Ξ
Π Σ Φ Ψ
Text input28
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (28) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Text input menu
For text input:
*Press and hold. The text in-
put menu is displayed:
Input language
Mark text
Copy/Insert
Text input withT9
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
Writing with T9
The display changes as you proceed.
It is therefore best if you finish a word
without looking at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
#Press briefly for T9Abc,
then
4 6 8 3 5
1A blank ends a word.
Do not use special characters such as
Ä. Use the standard characters in-
stead, e.g. A; T9 will do the rest
for you.
T9 word suggestions
If several options are found in the
dictionary for a key sequence (a
word), the most probable is dis-
played first. If the word you want has
not been recognised, the next sug-
gestion from T9 may be correct.
The word must be §highlighted§. Then
press
^The displayed word is re-
placed with a different
word. If this word is also
incorrect, press again.
^Repeat until the correct
word is displayed.
If the word you want is not in the
dictionary, it can also be written
without T9.
T9® Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,187,480,
5,818,437, 5,945,928, 5,953,541, 6,011,554,
6,286,064, 6,307,548, 6,307,549, 6,636,162 and
6,646,573; Australian Pat. Nos. 727539, 746674
and 747901; Canadian Pat. Nos. 1,331,057,
2,302,595 and 2,227,904; Japan Pat. No.
3532780, 3492981; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No.
HK1010924; Republic of Singapore Pat. No.
51383, 66959 and 71979; European Pat. Nos.
0 842 463 (96927260.8), 1 010 057 (98903671.0),
1 018 069 (98950708.2); Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; People’s
Republic of China Pat. Application Nos.
98802801.8, 98809472.X and 96196739.0;
Mexico Pat. No. 208141; Russian Federation Pat.
No. 2206118; and additional patents are pending
worldwide.
29Text input
right page (29) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
To add a word to the dictionary:
§Learn§ Select.
The last suggestion is deleted and
the word may now be entered with-
out T9 support. Press §Save§ to add it
automatically to the dictionary.
Correcting a word
FMove left or right, word
by word, until the
required word is
§highlighted§.
^Scroll through the T9
word suggestions again.
]Deletes the character to
the left of the cursor and
displays a new possible
word!
Additional information
Within a "T9 word", individual letters may
not be edited without first removing the T9
status. In most cases it is better to rewrite
the complete word.
0Set a full stop. The word is
concluded if it is followed by a
space. Within a word, a full
stop represents an apostro-
phe or hyphen:
e.g. §provider.s§ = provider’s.
EMoving the cursor to the right
ends the word.
#Press briefly: swap between:
abc, Abc, T9abc, T9Abc,
123. Status shown in top line
of the display.
Press and hold: all input vari-
ants are displayed.
*Press briefly: select special
characters (page 27).
Press and hold: opens text
input menu (page 28).
Text input30
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (30) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Text modules
Text modules can be stored in the
phone for adding to your messages
(SMS, MMS, e-mail).
C¢M¢Templates
¢Text modules
§New§ Select.
ìThe input field is
opened.
JWrite text, select with
§Options§ or, if applicable,
select input language and
copy or insert texts.
ûSave text module.
Using text modules
From text modules:
C¢M¢Templates
¢Text modules
ISelect text module from
the list
Create message
Select.
ISelect the type of mes-
sage in which the text
module is to be used.
ìConfirm. The text module
is added.
JComplete the message
and send.
From an application (SMS, MMS, e-mail):
JWrite the text for the mes-
sage in the application.
§Options§ Open the text menu.
Insert text Select, then Text modules.
ISelect text module from
the list.
ìConfirm. The text module
is added.
31Calling
right page (31) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
JEnter number (always
with area/international
dialling code).
]A short press clears the
last digit, a long press
clears the entire number.
APress the Call key. The dis-
played phone number is
dialled.
Ending a call
BPress briefly. Press this key
even if the person on the
other end of the line has
hung up first.
Setting the volume
[ / \Adjust the volume with
the plus/minus keys (only
possible during a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redialling
To redial the phone number last
called:
APress Call key the twice.
To redial other phone numbers that
were dialled previously:
APress the Call key once.
IPick out the phone
number from the list,
then press …
A… to dial.
International dialling codes
0Press and hold until a "+" is
displayed.
§Options§ Open call menu.
Country Press and select country.
Phone number memo
You can enter a phone number during the
call. The person to whom you are speaking
can hear these entries. When the connec-
tion has ended you can save or dial the
phone number.
Calling32
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (32) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
If the number is busy
If the called number is busy or can-
not be reached because of network
problems several options are
available (depending on the service
provider). An incoming call or any
other use of the phone interrupts
these functions.
Either
Auto last number redial
§Options§ Open call menu.
Auto dial The phone number is au-
tomatically dialled ten
times at increasing time
intervals.
ìConfirm. End with:
B End key.
Or
Call back b
§Options§ Open call menu.
Call back Your phone rings when
the busy number is free.
Press the Call key to dial
the number.
ìConfirm.
Reminder
§Options§ Open call menu.
Reminder A beep reminds you to re-
dial the displayed phone
number after 15 minutes.
Accept call
The phone must be switched on. An
incoming call will interrupt any other
use of the phone.
APress the Call key.
Or
ðPress the centre key.
A phone number transmitted by the
network plus the corresponding
name are displayed if they are stored
in Contacts (page 39).
Rejecting a call
§Reject§ Press.
Or
BPress briefly.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
33Calling
right page (33) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Handsfree
You can put the phone down during
a call. You can then hear the caller
via the loudspeaker.
§Options§ Open call menu.
Handsfr. Activate/deactivate
handsfree talking.
ìConfirm.
Swapping between
2calls b
Establishing a second
connection
You can call another number during
a call.
§Options§ Open call menu.
Hold The current call is put on
hold.
ìConfirm.
JEnter new phone number
or
H call up Contacts
or
A open call records and
select a phone number.
When the new connection is
established:
§Options§ Open call menu.
Toggle Swap between calls.
ìConfirm.
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly. Dur-
ing a call, you may be advised that
there is another call waiting. You will
hear a special tone during the call
(page 85). You have the following
options:
Warning!
Always switch off "handsfree talking" before
holding the phone to your ear. Otherwise
you will damage your hearing!
Calling34
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (34) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Accept the waiting call in addition to
the first
§Toggle§ Accept the waiting call
and place the current call
on hold.
Always proceed as above to swap be-
tween the two calls.
Reject the waiting call
§Reject§ Press.
Or
§Forward§ The waiting call is divert-
ed, for example,
to mailbox.
Accept the waiting call and end the
current call
BEnd the current call.
ðAccept the new call.
End call(s)
BPress briefly.
After the Return to held call? display,
you have the following choice:
§Yes§ You accept the call on
hold.
§No§ You end the second call
too.
Conference b
You can call up to 5 conference par-
ticipants one after the other and
then link them together in a confer-
ence call. Some of the functions de-
scribed may not be supported by
your service provider or may have to
be enabled specially.
A connection has already been
established:
§Options§ Open menu and select
Hold. The current connec-
tion is maintained.
H/JSelect phone number
from Contacts or enter it
manually.
When the new connec-
tion is established …
§Options§ … open the menu and se-
lect Conference. The held
call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
Ending
BAll calls in the conference
finish simultaneously
when the End key is
pressed.
35Calling
right page (35) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Call options
The following functions are only
available during a call:
§Options§ Open menu.
Direct call
If this is active, only one number can
be dialled.
Switching on
C¢T¢Security
¢Direct call
ìConfirm selection.
JEnter phone code.
When first prompted you define and
enter the phone code (4 - 8 digits).
Please do not forget this code (page 26)!
ìConfirm selection.
H/JSelect phone number
from Contacts or enter it
manually.
ìConfirm.
Applying
§Carol§ To dial the phone number
(e.g. "Carol") press and
hold the right softkey.
Hold Hold current call.
Microphone
on If switched off, the person
on the other end of the
line cannot hear you (mut-
ing).
Also: press * and
hold.
Handsfree Playback through the
loudspeaker.
Conference (p. 34)
Time/charges Display talktime that has
elapsed so far and (if set)
cost incurred during the
call.
Send DTMF Enter tone sequences
(numbers) for remote in-
quiries to an answering
machine.
Main menu Access to main menu.
Call transfer
= Connect the original call
to a second call. For you,
both calls are now ended.
Call status List all held and active
calls (e.g. participants in a
conference).
Calling36
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (36) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Switching off
#Press and hold.
JEnter phone code.
ìConfirm entry.
Tone sequences (DTMF)
You can, for example, enter tone se-
quences (digits) for remote access to
an answering machine during an ex-
isting connection. These entries are
transmitted directly as DTMF codes
(tone sequences).
§Options§ Open menu.
Send DTMF
Select.
JEnter phone number.
ìConfirm.
Using Contacts
Store phone numbers and tone se-
quences (DTMF tones) in Contacts in
the same way as a normal entry.
JEnter phone number.
0Press until a "+" appears
in the display (wait for
the connection to be
established).
JEnter DTMF tones (digits).
0If necessary, wait again
for three seconds at a
time for the receiver to
process the entries
correctly.
JEnter a name.
§Save§ Save entry.
You may also store just the
DTMFtones (digits) and then send
them during the call.
37Contacts
right page (37) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Contacts
C¢L
You can store up to 5000 entries in
this phone directory, with several
phone and fax numbers plus addi-
tional address details.
For fast access, the contacts and
functions are sorted and offered on
five tabs:
All contacts, Groups, Online status, SIM,
Filter
HOpen Contacts (fast ac-
cess in standby mode).
FSwitch between the
individual tabs.
Communication
ISelect contact.
ACall selected contact.
Or
§Options§ Open menu, then Create
message, to start an In-
stant Message dialogue.
All contacts
Display all entries stored in the
phone or on the SIM card in
alphabetical order.
New entry
ìConfirm New entry. The
tabs for creating the entry
are displayed.
FSwitch between the
individual tabs.
The following tabs are offered:
General
sett. First name, surname and im-
portant phone numbers. A
ringtone, a picture, or video
with sound can be assigned
to each contact.
Private General address information
and additional communica-
tion numbers such as fax and
e-mail.
Business Company information, ad-
dress, communication
numbers.
Person Personal details such as date
of birth, group membership
and other notes.
Presence Contact information for In-
stant Messaging (page 61).
Contacts38
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (38) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
In the respective tabs:
ISelect required input
fields.
JFill in input fields. The
maximum number of
characters available is
shown at the top of the
display.
At least one name or one
company must be en-
tered. Always enter
phone number with
dialling code.
úOpen options menu and
select Save.
Viewing/editing entries
ISelect required entry.
FSwitch between the
individual tabs.
üOpen current tab to edit.
úOpen options menu.
Groups
You are offered 10 different groups
to enable you to arrange your con-
tacts clearly. You can edit the names
of groups as you wish.
Editing group attributes
ISelect group.
§Options§ Open menu and select
Attributes. You can make
the following changes:
Name:, Ringtone:, Picture:
Adding a contact
Contacts may be added to a group
via All contacts.
ISelect contact,
open §Options§ and select
Add to group.
A contact can only belong to one
group.
Online status
Display all contacts for whom a
Instant Messaging address
(WV address) is entered.
Synchronisation
The Siemens MPM (Mobile Phone
Manager, page 119) allows you to manage
contacts using PCs.
39Contacts
right page (39) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
SIM
Display all contacts stored on the
SIM card.
New entry
ìConfirm New entry, enter
name and phone number,
and select the storage lo-
cation (SIM/protected
SIM).
Viewing/editing entries
ISelect required entry.
üEdit entry.
Editing menu
§Options§ Open menu.
Filter
Those entries which match the se-
lected filter criteria are displayed,
e.g. those containing a picture.
Add more
fields Move SIM card entry to
the phone memory. Now
all tabs are offered for
further entries.
from
contacts Copy entry/entries from
the phone memory to the
SIM card (reduced
information).
Change Location: SIM/Protected
SIM.
On special SIM cards,
phone numbers can be
stored in a protected loca-
tion. PIN2 is required for
editing.
Record #:
Select an unassigned
number for the entry. It
can be used to dial the
phone number.
(For standard functions see page 24)
Most used (default)
URL Birthday
Pictures Ringtones
E-mail
Contacts40
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (40) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
General options
§Options§ Different functions are of-
fered depending on the
tab and the current
situation.
More
Location
Switch the storage location of en-
tries between the phone memory
and the SIM card.
Synchronizatn.
You can synchronise your mobile
with an organiser stored on the In-
ternet (Remote sync., page 103).
Capacity
Display memory capacity.
Settings
Filter Only those entries
which match the filter
criteria are displayed.
Create
message Create a message for a
selected contact (SMS,
MMS, e-mail, Instant
Message).
Search IM ID Search for assigned In-
stant Message ID.
Internet The URL assigned to
the contact is visited via
the WAP browser.
Open Display phone numbers
for information.
Add to Store entry in Contacts.
Add to group Add entry to a group.
Take a photo,
Record video,
Record
sounds, etc.
Create picture, video
and sound information
for a contact from
scratch or add from
My stuff.
More See below.
(For standard functions see page 24)
Sort byöFirst name or surname
Spec.
numbers Display special phone
numbers, yes/no
Alarm time Period of time before
which you want to be re-
minded of an entry with a
birthday.
Display name First name or surname is
displayed.
Field setup Setup for fields on a tab.
Entry Tab: Tab that is to be shown
first.
41Contacts
right page (41) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
As business c.
Define a selected contact as a
business card.
Business card
Establish a contact as your own
business card to send to a
different GSM-phone.
Import
Set up readiness to receive via IrDA
or Bluetooth.
Add more fields
Move SIM card entry to the phone
memory. Now all tabs are offered for
further entries.
Conference
AStart a conference with
up to five particpants
highlighted in advance.
The contacts are dialled
one after another.
Call records42
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (42) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Call records
A caller's phone number is displayed
if
the caller has switched off the
Hide ID function and
the network supports the "Caller
Identity" function.
Alternatively, a caller’s name is dis-
played if it is stored in Contacts.
Your phone stores the phone
numbers of calls for convenient
redialling.
C¢P
ISelect record.
COpen record.
ISelect phone number.
ADial phone number.
Or
öDisplay information on
the phone number.
Up to 500 entries are stored in
the records:
Missed calls b
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
¿Symbol for missed call (in
standby mode).
Press the softkey beneath
the symbol to bring up
the inbox.
Calls received
Accepted calls are listed.
Calls dialed
Access to the last numbers you have
dialled.
AFast access in standby
mode.
Delete records
The records are deleted.
43Time/charges
right page (43) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Time/charges
You can display the charges and du-
ration during a call. You can set a
unit limit for outgoing calls.
C¢P¢Time/charges
Last call
All outg. calls
All incoming
Remain. units
ISelect display.
COpen area.
Time/charges options
úOpen menu.
Charge settings
Currency
Enter desired currency.
Charge/Unit
(PIN2 prompt)
Enter the currency used as well as
the charge per unit and time.
Account limit
(PIN2 prompt)
Special SIM cards allow you or the
service provider to define a credit
limit after which the phone is barred
for outgoing calls.
ñPress.
JEnter PIN2.
Account limit
Activate.
JEnter number of units.
§Options§ Open menu, then select
Save.
Auto display
Call duration and charges are
displayed automatically.
Reset Reset the currently select-
ed setting.
Reset values Reset all settings.
Charge
settings Call up the menu
(see below).
Camera44
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (44) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Camera
A camera with flash is integrated in
the phone. Take photos / record
videos and
use photos as wallpaper, a logo,
screensaver or startup and shut-
down animation
assign a photo/video to a contact
send photos/videos via MMS or
e-mail
save photos in My stuff (page 116)
or on the RS MultiMediaCard
(page 118).
Switching on
C¢R
Or
Xwith the plus/minus key in
standby mode.
The current (preview) image is dis-
played. You will see the following in
the first line from left to right:
ÚZoom factor
ÙNight mode
ÛWhite balance
ØFlash active.
The number of photos that can still
be taken in the selected resolution is
displayed in the preview image. This
number varies considerably depend-
ing on the subject matter and how
much storage space is required. You
will also see an indication of the
selected resolution or, if video mode
has been selected, there is an indica-
tion as to how much recording time
has already been used and the maxi-
mum time still available.
FSwitch between the Take a
photo and Record video
tabs.
Take a photo
ùTake a photo. A beep is
heard as the photo is tak-
en (this cannot be
deactivated).
I If necessary, set the
zoom factor first.
The photo is saved with a name, the
date and the time in the Pictures
(page 118) folder in My stuff.
To enter the name, see Settings in
the options menu.
45Camera
right page (45) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Image resolution
It is possible to set the quality of the
image regardless of the preview im-
age resolution. The best possible res-
olution is 1280 x 960 pixels.
To take individual wallpaper images
you need to set Background as the im-
age resolution in the options.
The resolution may decrease
depending on the selected digital
zoom.
Record video
The video mode resolution is the
same as the preview image
resolution.
ôStart video recording.
A red dot appears in the top right of
the display while the video recording
is being made.
õEnd video recording.
The video is saved with a name, the
date and the time in the Videos folder
(page 118) in My stuff.
Video resolution
It is possible to set the quality of the
image for a video regardless of the
preview image resolution.
The best possible resolution is
176 x 144 pixels.
Flash
If the flash is active, a symbol ap-
pears in the display. The flash is
charged constantly when activated.
This reduces the stand-by time.
ØThis symbol flashes when
the flash is being charged.
For settings, see options menu. The
flash performance depends on the
outside temperature and the charge
status of the battery. If the tempera-
ture is low and the battery needs
charging the flash performance
deteriorates.
Additional information
A mirror is integrated in the back of the
phone to make it easier to take self-
portraits.
Camera46
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (46) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Camera options
The following functions are availa-
ble, depending on the current
situation.
§Options§ Open menu.
Memory
assis. If there is insufficient
memory available the
memory assistant
is started.
Pictures Display list of photos.
Other videos Display list of videos.
Microphone
on Switch microphone on
or off.
Use flash Choose between:
Automatic, On, Off,
Red-eye
Settings Name for recordings
Video resolution
Image resolution
•Brightness
Colour mode
Night mode for poor
lighting conditions
ISO sensitivity
Flash strength
Autotimer delay in
seconds
Location:
My stuff (page 116) or
RS MultiMediaCard
(page 118).
Frame Selection of various
decorative frames.
Auto-timer The photo is taken after a
preset time. For the last
5 seconds, you will hear a
beep each second.
White
balance Choose between:
Automatic, Indoor,
Outdoor
(For standard functions see page 24)
47SMS/MMS
right page (47) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
SMS/MMS
You can use your phone to send and
receive text messages and MMS
(Multimedia Messaging Service)
messages.
Information about SMS
You can use your phone to transmit
and receive very long messages (up
to 760 characters). They are auto-
matically composed of several "nor-
mal" SMS messages (note higher
charges). Additionally, you can in-
sert pictures and sounds in an SMS.
Information about MMS
The Multimedia Messaging Service
enables you to send texts, pic-
tures/videos and sounds in a com-
bined message to another mobile
phone or to an e-mail address. All el-
ements of an MMS message are
merged to form a "slide show".
Depending on your phone's settings,
you will receive either the complete
message automatically or notifica-
tion that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Ask your service provider whether
this service is available. You may
have to register for this separately.
Writing an SMS
C¢M¢Create new¢SMS
JEnter text.
You will find information
on writing texts with and
without T9 in the chapter
"Text input", (page 27).
§Options§ Open menu, then select
Add addressee.
JEnter phone number
and …
û… save
or Select recipient from
Contacts.
AStart sending process.
Additional information
The following is displayed in the uppermost
line: text input status, number of SMS mes-
sages required, number of characters still
available for the current SMS.
If the length of the text exceeds 760 char-
acters, the message is converted into an
MMS.
SMS/MMS48
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (48) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
SMS options
§Options§ Open menu.
Add addressee Add recipient.
Del. addressee Delete recipient.
Save as draft Store the SMS as a
draft.
Text Edit menu Input language,
Mark text, Copy,
Insert
Send options See page 52.
Insert text Text modules
(page 30)
Emoticons (page 55)
Signature
Opening sentence
Contact details
Bookmark
Play Play back animations
and melodies with the
media player.
Add item When melodies, pic-
tures, videos or anima-
tions are added the
SMS is converted into
an MMS (page 49).
Remember that these
may be protected
(DRM, page 21).
Create item Take a photo/
Record video
Start camera
(page 44).
Record sounds
Start sound recorder
(page 109).
(For standard functions see page 24)
49SMS/MMS
right page (49) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Writing an MMS
C¢M¢Create new¢MMS
Layout
An MMS may comprise a series of
pages. Each page may contain a text,
a picture/video and a sound. Re-
member that pictures and sounds
may be protected (DRM, page 21).
For functions related to this see
MMS options page 50.
Contents
úOpen menu, then select
Add item/Create item.
Text
You will find information on writing
texts with and without T9 in the
chapter "Text input", (page 27).
Pictures/Videos
Add pictures and videos from My stuff
or take new ones with the camera.
Audio
Add melodies from My stuff or record
new ones with the sound recorder.
Contacts
Add address data from Contacts.
Attachment
Add any files from My stuff.
Sending
§Options§ Open menu, then select
Add addressee.
JEnter phone number
and …
û… save
or select recipient from
Contacts.
If necessary insert a
subject:
Open menu, then select
Add Subject: and enter a
brief description of the
MMS.
AStart sending process.
SMS/MMS50
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (50) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
MMS options
§Options§ Open menu.
Receive
A new incoming message is shown
in the display.
ìConfirm receipt.
mUse the softkey under-
neath to open the Inbox.
Options
Different functions are offered de-
pending on the situation.
§Options§ Open menu.
Save as templ. Save MMS as a tem-
plate.
Add addressee Add recipient.
Del. addressee Delete recipient.
Add Subject: Add subject field.
Add item Add contents.
Create item Take a photo/Record
video
Start camera (page 44).
Record sounds
Start sound recorder
(page 109).
Preview Play entire MMS in the
display.
Save as draft Store the MMS as a
draft.
Text Edit menu Input language
Mark text
Copy
Insert
Send options See page 54.
Insert text Text modules
Emoticons (page 55)
Signature
Opening sentence
Contact details
Bookmark
Page duration: Enter the lifespan of a
page in seconds.
View pictures/
Play Play back animations
and melodies with the
media player.
Open attach. Play back attachment
with the media player.
(For standard functions see page 24)
View Read the SMS/MMS or
the notification about
an MMS.
Reply/
Reply to all With new SMS.
With new MMS.
Quoted original: new
SMS with the sender
as recipient and the
first 50 characters of
the received
message.
51SMS/MMS
right page (51) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Reading
C¢M¢Inbox
Select the SMS/MMS tab.
ISelect the required
message.
öRead the SMS/MMS or the
notification about an
MMS.
Options
Different functions are offered de-
pending on the situation.
úOpen menu.
Forward Forward message to
another recipient. If
wished, additional con-
tents can be added to
an MMS.
(For standard functions see page 24)
Additional information
Plus/minus keys
Adjust volume.
*Activate/deactivate sound.
For MMS only:
IScroll up/down within a page.
EJump to next page and return
at end to first page.
DJump to the start of a page or
to the previous page.
Save picture Opens the picture folder
in My stuff.
Play Play back MMS.
Pause Pause playback of an
MMS.
Save sound Opens My stuff for
selection of a folder.
Open link Starts the WAP browser
(page 69).
Open item The contents of the MMS
are listed for playback
with the media player or
for saving.
Save item The contents of the MMS
are listed for saving in the
relevant folder.
Open attach. Open attachment.
Save attach. Opens the relevant folder
in My Stuff for saving.
(For standard functions see page 24)
SMS/MMS52
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (52) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Draft
C¢M¢Draft¢SMS/MMS
The drafts tab is displayed.
Outbox
C¢M¢Outbox¢SMS/MMS
The tab for the messages not sent
yet is displayed.
Sent
C¢M¢Sent¢SMS/MMS
The tab for the messages sent is
displayed.
Archive
C¢M¢Msg. archive
¢SMS/MMS
Messages are saved in the archive
according to their type and origin.
Select tab and read required
message(s).
You can move important messages
to the archive with §Options§, Move to
archiv..
Templates
C¢M¢Templates
¢MMS templates/Text modules
MMS templates
MMS templates are messages saved
without an address. They can be sent
as a whole or as part of a new MMS.
ISelect MMS template.
ýPrepare message and
send.
Text modules
See page 30.
SMS settings
C¢M¢Msg settings¢SMS
¢Select function.
Send options
Service
center Enter the phone numbers
for the service centre as
provided by the service
provider.
Recipient Enter recipient's name as
the default for all SMS
messages.
Transm. rpt. Request delivery
confirmation.
Validity
period Period in which the service
centre is to try to deliver the
message.
53SMS/MMS
right page (53) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Creation
More information on SMS
SMS status report
If the message cannot be transmit-
ted to the service centre you are of-
fered the chance to repeat
the transmission. If this also fails,
contact your service provider. The
Message sent. message only indicates
transmission to the service centre.
This will then attempt to relay the
message within a certain period.
Phone number in SMS
Phone numbers §marked§ in the text
can be dialled (A) or saved in
Contacts.
Downloading ringtones and logos
You can receive links for download-
ing ringtones, logos, screensavers,
animations and information about
applications with an SMS. Please
highlight this link and, by pressing
the Call key A, start the download.
Please check that the dial-in access
(page 78) is configured.
Remember that these may be
protected (DRM, page 21).
åSIM memory full
If the message symbol flashes the
SIM memory is full. No more SMS
messages can be received. Messages
must be deleted or archived.
SMS via
GPRS SMS messages are sent via
GPRS.
Direct reply
=If activated, the reply to your
SMS message is handled
via your service centre (for
information, please contact
your service provider).
Add
signature A "signature" is attached to
each SMS. Choose be-
tween: Never, Always,
New messages
Signature Create signature.
Opening
sentence An introductory sentence or
salutation is placed at the
beginning of each SMS.
Choose between: Never,
Always, New messages
Edit open-
ing phrase: Create introductory
sentence.
Message
type May be set by the service
provider. Default:
Standard text: Normal
SMS message.
SMS/MMS54
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (54) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
MMS settings
C¢M¢Msg settings¢MMS
¢Select function.
Send options
Creation
Retrieval
Transm. rpt. Request delivery
confirmation.
Read report Request confirmation that
the message has been
read.
Validity
period Period in which the service
centre is to try to deliver the
message:
Delivery
time Set the time for delivery.
Hide
number Hide sender's phone
number.
Create mode Free, Limited,
Warning
Max. msg.
size Unlimited, 95 Kbytes,
295 Kbytes
Default page
duration Default lifespan of a page
in seconds.
Add
signature A "signature" is attached to
each MMS. Choose be-
tween: Never, Always,
New messages
Signature Create signature.
Opening
sentence An introductory sentence
or salutation is placed at
the beginning of each
MMS. Choose between:
Never, Always,
New messages
Edit opening
phrase: Create introductory
sentence.
Retrieval Automatic: the whole
MMS is saved.
Limited: only the
notification is saved.
Re-
triev.(roam.) Receive when outside your
home network.
Reject
anonym. Reject anonymous
messages.
Allow deliv.
rep. Permit delivery report.
Allow read
rep. Permit confirmation that
the message has been
read.
Allow
advertise. Permit receipt of advertis-
ing material.
55SMS/MMS
right page (55) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Connectiv. set.
Select the required MMS profile in
which the connection attributes are
specified (page 81). You can obtain
the data you need for this from the
service provider or at:
www.siemens.com/
mobilephonescustomercare
Save aft. send
SMS messages are always saved in
the Sent list after sending.
Zoom in
You can select one of three specified
text sizes for presenting a message.
Emoticons
Emoticons are small symbols
(smileys) with which you can show
your feelings in pictorial form.
I/FSelect symbol.
ìInsert at the cursor
position.
You can set whether the
emoticons are to be displayed as
graphics or made up of special
text characters ;-).
E-mail56
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (56) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
E-mail
Your phone has an e-mail program
(client). You can use it to create and
receive e-mails.
Writing/sending
C¢M¢Create new¢E-mail
JEnter text.
You will find information
on writing texts with and
without T9 in the chapter
"Text input", (page 27).
§Options§ Open menu, then select
Add addressee.
JEnter e-mail address(es)
and …
û… save
or Select recipient from
Contacts.
Add Subject
§Options§ Open menu, then select
Add Subject: and enter a
brief description of the
e-mail.
Add additional address fields
§Options§ Open menu, then select
Add Cc: or Add Bcc: and
add additional recipients
(see above).
Add attachments
§Options§ Open menu, then select
Attach item. The name and
file size are displayed.
ASend e-mail.
Write/send options
Different functions are offered de-
pending on the situation.
úOpen menu.
Text Edit
menu Input language
Mark text
Copy
Insert
Add address-
ee Add a recipient from
Contacts.
Attach item My stuff: Open to
make a selection. Re-
member that pictures
and sounds may be
protected (DRM,
page 21).
Take a photo/
Record video: Start
camera.
Record sounds Start
sound recorder.
Contacts: Open to
make a selection.
Add Subject: Add subject line (max.
255 characters).
Add Cc: Add address(es) of copy
recipient(s).
57E-mail
right page (57) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Receiving/reading
C¢M¢Inbox
Select the E-mail tab.
Before an e-mail can be read, it must
be retrieved from the server.
úOpen menu, then select
Retrieve e-mail or Ret. con-
tent.
ISelect the required
message.
öRead message.
Receive/read options
úOpen menu.
Add Bcc: Add address(es) of copy
recipient(s) who are not
visible to the other
recipients.
Remove
attach. Remove attachment from
e-mail.
Open attach. Open attachment.
Insert text Text modules (page 30)
Emoticons (page 55)
Signature
Opening sentence
Contact details
Bookmark
Save as draft Store the e-mail as a
draft.
Send options Transm. rpt.
Request delivery
confirmation.
Read report: Request
confirmation that the
message has been
read.
Priority: Medium,
High, Low
(For standard functions see page 24)
Reply/
Reply to all/
Forward
Send or forward reply to
e-mail/marked e-mail.
Ret. content Only receive the contents
of the e-mail (see also
download options for
E-mail setup/General
sett. page 59).
Save attach. Store e-mail attachments
in My stuff (page 116).
Save to ªStore sender in Contacts.
Move to
archiv. Move e-mail to archive.
E-mail58
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (58) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Draft
C¢M¢Draft¢E-mail
The tab for the messages not sent
yet is displayed.
Sent
C¢M¢Sent¢E-mail
The tab for the messages sent is
displayed.
Archive
C¢M¢Msg. archive
¢E-mail
Messages are saved in the archive
according to their type and origin.
Select tab and read required
message(s).
You can move important messages
to the archive with §Options§, Move to
archiv..
Setting
C¢M¢Msg settings
¢E-mail setup
¢Select function.
Accounts
Before using this service you must
set the server access and your e-mail
parameters. You will receive the nec-
essary data from your service provid-
er or at:
www.siemens.com/
mobilephonescustomercare
ISelect account.
Activate access
ìActivate an existing
account.
Set access
§Options§ Open menu, then select
Edit. Fill in the access pro-
files as specified by your
service provider.
59E-mail
right page (59) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
User settings
Account sett.
See page 81.
General sett.
General settings for receiving and
sending.
User name: Your name.
E-mail address: Your e-mail address,
e.g.:
name@domain.abc
Reply address: Additional e-mail ad-
dress for replies.
User ID: Your user ID.
Password: Your password.
Download
option Receive complete e-mail
or only the message
header.
Size limit Limit size for a receiving
an e-mail in Kbytes.
Copy on
server: Leave copy of e-mail on
the server.
Delete option Delete e-mail on phone
only or also at the server.
Add
signature A "signature" is attached
to each e-mail. Choose
between: Never, Always,
New messages
Signature Create signature.
Transm. rpt. Request delivery
confirmation.
Read report Request confirmation that
the message has been
read.
Allow deliv.
rep. Permit delivery
confirmation.
Allow read
rep. Permit confirmation that
the message has been
read.
WAP push60
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (60) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
WAP push
WAP push messages are transmitted
from special service centres. If, for
example, you have requested con-
figuration data from your service
provider this will be transmitted via
WAP push.
Inbox
C¢M¢WAP push
ISelect the required
message.
öRead the message or in-
formation about the
transmitted data/pro-
grams and, if applicable,
trigger a download.
Inbox options
Different functions are offered de-
pending on the situation.
§Options§ Open menu.
Msg settings
C¢M¢Msg settings
¢WAP push
§Options§ Open menu, then select
Settings.
Execute Execute program.
Install Start installation.
Accept/
Reject Accept/reject message.
Settings Call up settings.
Allow push Settings to receive WAP
push messages:
Allow specific,
Allow none, Allow all
If Allow specific has been
set, the following lists may
be edited.
Accept list All messages whose send-
ers are included in this list
are accepted (max.
20 entries possible).
Reject list All messages whose send-
er is included in this list are
automatically deleted
(max. 20 entries possible).
Unk. ad-
dress Handling of messages
whose senders are neither
in the Accept list nor the
Reject list:
Reject, Delete
61Chat room
right page (61) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Chat room b
You can chat with dialogue partners
who are also registered for this serv-
ice on your phone or PC. Your part-
ners are entered in contact lists for
this and selected from them for a pri-
vate or group dialogue. Similarly,
you can be invited to a dialogue by
other subscribers.
GPRS must be switched on.
Start menu (offline)
If Autom. login is activated the main
overview is displayed immediately.
C¢M¢Chat room
Login Start to make a
connection.
Account The access settings are
normally preconfigured. If
necessary, enter User ID:
and Password: to activate
access.
Please contact your serv-
ice provider if you do not
have access data.
Online status
Call up the Presence
Manager to set your per-
sonal attributes (page 107).
Saved convers.
Access to permanently
saved dialogues.
Conversa. hist.
Read all dialogues from
the last session offline
(deleted next time you
log in).
Settings Settings for applications
and servers.
Automatic login:
Select your preferred
login procedure: e.g.
manual or when the
phone is switched on.
Timeout:
Set the timeout in
minutes after which Chat
room is put in the
background if no action is
taken. The session
continues and can be
called up again via the
menu.
Pop-up info:
Activate/deactivate pop-
ups for new messages or
change the online status,
for Chat room only, if the
application is visible.
Chat room62
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (62) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Main overview (online)
After you have logged in successful-
ly, depending on your service provid-
er you will see up to 5 tabs as de-
scribed below:
Conversations
IM contacts
IM groups
Info messages
Saved convers.
Conversations
The following are shown in the list:
Online contacts with whom a con-
versation is being held.
Offline contacts to whom a mes-
sage has been sent.
Groups you are registered with.
Groups that are not connected
and have unread messages.
Offline contacts with unread
messages.
Starting a dialogue
ISelect an entry (individual
contact or group) for a
dialogue.
ìStart dialogue.
Dialogues that have taken place
previously are displayed.
Navigation:
IScroll in the dialogue.
FSwitch between different
dialogues.
Dialogue:
ü/JWrite text.
ýSend text.
Naturally, you can also receive mes-
sages from contacts you do not
know. This will be pointed out to you
in the display, and you can either
switch to the dialogue or block the
contact.
Options
§Options§ Open menu.
Different functions are offered de-
pending on the selection and
situation:
Contact
details Additional information
about the contact.
Group details Additional information
about the group.
Online status Set your personal
attributes (page 107).
Add member Add a new member.
Find member Look for member.
63Chat room
right page (63) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
IM contacts
Display the contact list last used and,
if applicable, entries from Contacts
with Instant Message ID.
ISelect an entry in a con-
tact list for a dialogue.
ìStart dialogue.
At the end the offline con-
tacts are displayed, visual-
ly separated and in
alphabetical order.
IM contacts options
§Options§ Open menu.
Different functions are offered de-
pending on the selection and
situation:
Invite Invitation to the contacts
in your own group to join
the dialogue.
Delete
member Delete contact from the
list of members.
IM contact Save contact in the cur-
rent contact list on the
server.
Settings Settings for auto login.
Block contact No more messages are
received from the contact
and the contact receives
no status information
from you.
Message to ID Enter ID manually.
Logout The session is ended
and the start menu
displayed.
Only the display is ended
with §Exit§; the session
continues in the back-
ground. New messages
are stored in the Inbox.
To continue the dia-
logue, open the applica-
tion again via the main
menu.
(For standard functions see page 24)
Add contact User ID:
Enter a unique user
(login) name.
Display name:
Enter your own nickname
for the contact.
Find contact Look for the contact in
the contact lists.
Block contact No more messages are
received from the contact
and the contact receives
no status information
from you.
Delete contact Delete contact from the
list.
Chat room64
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (64) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
IM groups
Display all groups created by you or
in which you are yourself a member.
Hold dialogue as for IM contacts.
IM groups options
§Options§ Open menu.
Different functions are offered de-
pending on the selection and
situation:
Contact lists Display your personal
contact lists.
Create new contact
list:select New entry and
assign an ID and a name.
Block list Display the list with re-
jected contacts.
For further functions see page 62.
Invite Invitation to the contacts
in your own group to Inst.
Message.
Add member Add new group member.
Find member Search for group
member.
Delete
member Delete contact from the
group member list.
Add group Add new group.
Find group Search for group on the
server (also groups no
longer managed in the
list).
Create group Group ID:
Enter an unambiguous
group name.
Name:
Name of group.
Topic:
Topic of group.
Searchable:
Other people can look for
the group.
Welcome message:
Enter own greeting.
Type:
Restricted or open.
Create group Delete group.
Screen name My name for group
dialogue.
For further functions see page 62.
65Chat room
right page (65) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Info messages
Display messages such as invitations
to a group, server messages or other
system messages.
öDisplay selected message.
Or
öReply to
invitation/requests.
To reject, open §Options§ menu and
select Deny.
Saved convers.
Display permanently saved
dialogues.
öDisplay selected dialogue.
Saved dialogues can be renamed or
deleted via the §Options§ menu.
Voice mailbox/Mailbox66
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (66) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Voice mailbox/Mailbox
C¢M¢Voice mailbox
Most service providers provide a
mailbox in which a caller can leave
voice mail for you
if your phone is switched off or
not ready to receive,
if you do not want to answer,
if you are making a phone call
(and if Call waiting page 85 is not
activated).
If the voice mail service is not part of
your service provider's standard
package, you will need to register for
it, and possibly set it manually. The
following sequence may vary from
service provider to service provider.
Settings b
The service provider supplies you
with two phone numbers:
Save mailbox number
Call this phone number to listen
to the voice messages left for you.
C¢M¢Voice mailbox
L/JSelect phone number
from Contacts or enter/
change it manually.
§OK§ Confirm.
Save call divert number
Calls are diverted to this phone
number.
C¢T¢Call setup
¢Forward
ISelect condition,
e.g. Unanswered.
ñConfirm change, then se-
lect Set.
JEnter phone number.
§Options§ Open, then select Save.
Listen b
A new voice message can be an-
nounced as follows, depending on
the service provider:
lSymbol plus beep.
Or
mNotification via SMS.
Or
You receive a call with an automatic
announcement.
Call your mailbox and play the mes-
sage(s) back.
1Press and hold (if neces-
sary enter mailbox
number once only).
Confirm with §OK§ and
§Mailbox§ depending on
your service provider.
67CB services
right page (67) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
CB services b
C¢M¢CB services
Some service providers offer infor-
mation services (info channels, Cell
Broadcast). If reception is activated,
you will receive messages on the ac-
tivated topics in your Topic list.
CB messages are displayed in stand-
by mode; longer messages are
scrolled automatically.
Receive CB
ñActivate/deactivate CB-
service. If the CB service is
activated, standby time
for the phone will be
reduced.
Read new CB
ìAll new messages are dis-
played in chronological
order.
Topic list
Add up to 10 topics to your personal
list from the topics index.
Requirements: Use Topic index is acti-
vated and the service provider sup-
ports the function.
ñActivate/deactivate topic.
öDisplay message on cur-
rent topic if any received.
New topic Add to topic list.
If the topic index is available, se-
lect a topic from it and confirm.
Create a new topic. Enter topic
name and channel number. Open
§Options§ menu and select Save.
Auto display
ñChoose to display:
no messages, all messag-
es, or only all new
messages.
Use Topic index
ñActivate/deactivate use of
the topic index.
CB languages
Receive Cell Broadcast messages in
just one language, in several, or in all
languages.
Displays
Ö, ÕTopic activated/deactivated.
mNew messages received on
the topic.
nMessages already read.
Internet68
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (68) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Internet
C¢O¢Internet
¢Select function.
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
In addition, you can visit
wap.siemens.com ("Downloads")
where you can download or update
games, applications, sounds, graph-
ics and more for your phone. Inter-
net access may require registration
with the service provider.
Access to the service
provider
Direct call-up of the browser with
the URL from your service provider.
Download wiz.
You will not be left on your own dur-
ing the download!
Enter URL
On inputting a URL the browser is
started and the entered page
displayed.
Bookmarks
Display URL/call up page
List bookmarks
Display list of bookmarks
stored in the phone.
ISelect bookmark.
ìCall up URL.
Saving
Bookmark site
The current page is saved
in the phone as a
bookmark.
Bookmark options
§Options§ Open menu.
Here you will find functions for
changing and managing bookmarks
and their folders. This includes edit-
ing individual entries with the corre-
sponding URLs as well as deleting
and moving them to other folders.
69Internet
right page (69) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Internet
Calling the function opens the
browser with the preset option.
Browser menu
§Options§ Open menu.
End connection
BPress to clear down the
connection and close the
browser.
Navigation in the browser
Display symbols in the browser
(selection)
Enter special characters
*, 0
Select important special
characters.
Homepage Call up the pre-set
homepage of the current
profile.
Bookmarks List bookmarks Dis-
play list of bookmarks
stored in the phone.
Bookmark site The cur-
rent page is saved as a
bookmark.
Go toöEnter URL to dial an Inter-
net address directly, e.g.
wap.siemens.com
Reload Reload current page.
Show URL Display the URL of the
page currently loaded for
sending via
SMS/MME/e-mail.
History Display most recently vis-
ited Internet sites.
Disconnect Disconnect the Internet.
File Save the object on the
current page or the com-
plete page; display saved
pages.
Settings Set or reset browser.
Exit browser Close the browser.
ì Select a link.
Settings, status on/off.
B •Press briefly: go back a level.
I One input field/link forward/back.
Scroll one line.
² Connect ´ No net-
work
³ GPRS online ± Network
Internet70
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (70) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Browser settings
C¢O¢Internet
§Options§ Open menu.
Settings Select.
Profiles
Processing depends on the service
provider (see page 81).
History
Display most recently visited
Internet sites.
Saved websites
Display list of pages stored in the
phone.
Browser Set start option as well as
handling of pictures and
sounds plus send options.
Protocol
parameters Set protocol parameters,
push messages and abort
time as well as handling of
cookies.
Security Set encryption.
Context Reset session; delete
cache, history and cookies.
Your Internet browser is licensed by:
71Settings
right page (71) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings
Profiles
C¢T¢Profiles
Several settings can be stored in a
phone profile in order, for example,
to adapt the phone to the surround-
ing level of noise.
Six profiles are provided with de-
fault settings. They can be
changed however:
General
Silent alert
Meeting
Outdoor
Car Kit
Headset
You can name two personal
profiles (<Name>).
Switching on
ISelect default profile or
personal profile.
ìActivate the profile.
Changing profile settings
Edit a default profile or create a new
personal profile:
ISelect profile.
§Options§ Open menu.
Change sett.
Select.
The list of available functions is
displayed.
When you have finished setting a
function, you return to the profile
menu where you can change a
further setting.
Additional information
To call up the list in standby mode:
G profile list is displayed.
The active profile is identified with ·.
Settings72
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (72) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Profile options
§Options§ Open menu.
Car Kit
If an original Siemens car kit is used,
the profile is switched on automati-
cally when the phone is inserted into
the cradle (also see Accessories,
page 130).
Headset
The profile is only switched on auto-
matically if an original Siemens
headset is used (also see Accesso-
ries, page 130).
Activate Activate selected profile.
Change sett. Change profile settings.
Copy from Copy settings from anoth-
er profile.
Rename Change personal profile
(except default profiles).
73Settings
right page (73) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Ringtones
C¢T¢Ringtones
¢Select function.
Volume
Set the volume for all tones.
ISet the volume.
ìConfirm setting.
You can also make individual set-
tings for the following functions:
Calls
Messages
•(SMS, MMS, CB services, E-mail,
Duration)
Organizer
Alarm clock
Chat room
Games
Shutdown tune
Startup tune
Different options are available de-
pending on the function:
Tunes
ISelect a ringtone from
My stuff.
Ringer setting
Ring Play back the ringtone at
the set volume.
Ascend Set ringtone to a rising
volume.
Beep Reduce ringtone to a
short beep.
Off Deactivate all tones for
the function concerned.
Additional information
Use the Sound recorder to record your
own ringtones (page 109).
Settings74
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (74) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Topics
C¢T¢Topics
Load a completely new visual pres-
entation onto your phone. Various
functions are reorganised on a
theme basis at the press of a key,
e.g.
Animations
Sounds
Color skins
Background
Theme files are compressed to save
memory space. After a download or
a call from My stuff, these are auto-
matically unzipped when activated.
Activating a new theme
ISelect theme.
ìActivate; if required, view
§Preview§.
Additional information
It is possible that the existing settings could
be overwritten.
75Settings
right page (75) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Display
C¢T¢Display
¢Select function.
Background
Set wallpaper graphic for the display.
Logo
Choose picture to be displayed in-
stead of the provider logo.
Screensaver
After a specifiable time, the screen-
saver shows a picture in the display.
An incoming call and/or pressing any
key will end the function except if
the code security with the telephone
code is activated.
Preview
Display the screensaver.
Style:
Choose between: Digital clock,
Analog clock, Bitmap, Animation,
Energy saving, Off.
Picture:
Select image in My stuff.
Timeout:
Set period after which the screensav-
er starts.
Code protection:
The phone code is requested to close
the screensaver.
Start up anim.
Select animation to be shown when
the phone is switched on.
Shutdn anim.
Select animation to be shown when
phone is switched off.
Greeting
Enter greeting to be displayed in-
stead of animation when phone is
switched on.
Large font
You can choose between two font
sizes for the display.
Lighting
Set display light brighter/darker. The
darker the setting the longer the
standby time.
IPress the navigation key
repeatedly at the top/bot-
tom to adjust up or down.
Note
The Digital clock/Animation screensav-
ers reduce your phone's standby time.
Settings76
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (76) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Silent alert
C¢T¢Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The silent alert can be switched
on in addition to the ringtone (e.g. in
a noisy environment). This function
is deactivated when the battery is
being charged and accessories are
connected (except the headset).
Silent alert
ñActivate/deactivate
silent alert.
Play demo
The types of silent alert offered are
demonstrated.
Assigning types of silent alert
Each of the following applications
can be assigned their own type of
silent alert:
Calls, Messages, Alarm, Chat room
77Settings
right page (77) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Phone Pilot
C¢T¢Phone Pilot
¢Select function.
Your Phone Pilot will provide you with
information for many actions that
you carry out with your phone. It will
also remind you about appointments
or birthdays.
A Phone Pilot is available on the
phone as standard and cannot be
deleted.
Activating, deactivating
Off You can deactivate the
Phone Pilot function.
Default Select the included
"standard figure".
If you have loaded additional figures,
you can also install, activate or
delete these:
ISelect entry.
CActivate.
Install
You can download additional figures
from the Internet.
ISelect entry from the list
or from the Inbox.
JWhen installing a new
Phone Pilot you can give
this its own name.
§Yes§ Activate.
Settings78
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (78) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Connectivity
C¢T¢Connectivity
¢Select function.
IrDA
Your phone has an infrared inter-
face. With this interface, you can ex-
change data such as pictures, ring-
tones, Addressbook entries,
business cards or organiser data with
other devices which also have
an infrared interface.
The infrared interface is on the left
side of the phone. The distance be-
tween the two devices must not ex-
ceed 12 inch (30 cm). The infrared
windows in both appliances must be
aligned as accurately as possible
with each other.
ìActivate/deactivate IrDA.
If IrDA (infrared) is activated, Blue-
tooth is not active and vice versa.
Shown in the display:
¯IrDA activated.
®During transmission.
EGPRS (EDGE)
ìActivate/deactivate
EGPRS.
EGPRS is a method for transmitting
data in the mobile network faster
than with GPRS. Use EGPRS and if the
network has sufficient capacity, you
can be connected to the Internet
permanently. Only the actual trans-
mission time is charged by the net-
work operator. Some service provid-
ers do not yet support this service.
Shown in the display:
£Activated and available.
¢Registered.
¤Temporarily interrupted.
EGPRS info
Display information on connection
status.
79Settings
right page (79) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Bluetooth® (BT)
Bluetooth is a short-range radio con-
nection by means of which a headset
or car kit, for example, can be con-
nected without the need for wires.
Using the Send/print function in the
options menu for the application
concerned you can also use this
route to send data.
With SAP (SIM Access Profile) a car
phone GSM module can, for exam-
ple, use the access data from the SIM
card on your phone. There is no need
to swap the SIM card. It is possible
that SAP might not be supported by
your service provider.
Each Bluetooth device has its own
specific address and can be given a
self-explanatory name as an option.
Password protection ensures the se-
curity of a Bluetooth connection, as
does including the BT partner in a list
as a "trusted" device.
To establish a Bluetooth connection
between your phone and other Blue-
tooth devices you must activate
Bluetooth.
ìActivate/deactivate
Bluetooth.
If Bluetooth is activated, IrDA (infra-
red) is not active and vice versa.
If Bluetooth is activated, standby
time for the phone will be reduced.
B-tooth setup
ìBluetooth activation.
My BT name: You can give
the phone a name when
you activate Bluetooth for
the first time.
Search
The search can be global or just for
certain BT devices specified in the
options menu.
ìOpen selection.
The Bluetooth® word mark and logos are
owned by Bluetooth SIG, Inc. and any use
of such marks by Siemens is under licence.
Other trademarks and trade names are
those of their respective owners.
Bluetooth QDID (Qualified Designer ID):
B02422
Shown in the display
¨Bluetooth activated.
©Bluetooth visible to others.
«Bluetooth during data
transmission.
ªCall accepted on Bluetooth
device.
Settings80
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (80) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Specify which BT devices are to be
searched for:
All All BT devices
Audio E.g. headset, Car Kit
Phone Other BT phones
PC Personal computer with
BT connection
ìStart search.
The number and name of the most
recently found BT device are
displayed.
ìThe search is ended and
the first 10 devices found
are shown in a list.
§Repeat§ Start new search.
IScroll to the required
entry.
ìDial the device and start
the procedure for accept-
ance as a "trusted" device
in the list of known devic-
es. To do this, enter the
password for the other
device. If the list is full it is
not possible to add anoth-
er device.
Device list
Known devices
To make selection easier, frequent
BT partners can be recorded in the
known device list. If entries are
"trusted", no password query is
made.
Last connected
List of most recently and/or still con-
nected devices.
Reject list
Attempts to make connections to de-
vices in this list are rejected.
Last srch result
List of the last devices found.
Lists options
Different functions are offered de-
pending on the list.
§Options§ Open menu.
Search/Retry Search for BT devices or
repeat search.
Use as audio If not possible automati-
cally, specify device as
an "audio" device.
Higher priority Move entry up the list so
that, for example, a spe-
cific audio device is used
first.
Lower priority Move entry down the list.
81Settings
right page (81) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
My BT name
The phone is given a name (max.
20 characters) – this is the name the
partner sees. If no name is given, the
phone uses the non-changeable
device address.
Information about the BT hardware
also cannot be modified.
Visib.to others
Make settings to specify how your
phone should "act" when in contact
with other BT devices. This means (if
"visible"), for example, that the de-
vice address or the BT name of your
phone is shown to other BT devices if
they request this in order to receive
or send data.
Not visible
Your phone is not "visible" to other
BT devices. Known devices such as
the Bluetooth Headset / Car Kit con-
tinue operating.
Auto mode
Your phone is "visible" to other BT
devices for five minutes. You will
then be asked if "visibility" should
continue.
Always visible
Your phone is always "visible" to oth-
er BT devices. These devices can cre-
ate a connection to your phone and
be added to the known device list if
necessary.
BT aud. stream
When a Bluetooth headset is used,
all audio signals are transmitted to
this exclusively.
Configura. set
Default setting and activation of the
connection profiles for data
transmission.
The phone default setting varies
from service provider to service
provider:
The settings have already been
implemented by the service pro-
vider. You can start immediately.
Access profiles have already been
created by your service provider.
Then select profile and activate.
The access profiles must be con-
figured manually. In this case, you
will receive the necessary data
from the service provider or visit:
www.siemens.com/
mobilephonescustomercare
to reject list Move entry to the reject
list.
to known list Move entry to the list of
known devices.
(For standard functions see page 24)
Settings82
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (82) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Selecting profile
FSelect the profile.
ìConfirm selection.
Setting profile
FSelect the profile.
§Options§ Open menu.
Edit Select service and enter
data.
Fax/data
Send voice/fax b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rcve fax/data b
Your service provider has given you a
number for telephoning and a
fax/data number.
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to re-
ceive the fax/data.
User name: Your name.
Application
profile: Select application profile.
Preferences List of preferred
accesses.
POP3 server: Enter Internet address if
the server type is POP3
and SMTP.
POP3 port: (Default: 110)
SMTP server: Enter Internet address.
SMTP port: (Default: 25)
SMTP
authentic.: Authentication: Yes/No
SMTP
password: A user password will be
required if "Authentica-
tion" is set to Yes.
83Settings
right page (83) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Shortcuts
C¢T¢Shortcuts
Softkeys
You can assign one function to each
of the two softkeys.
Editing
ISelect key.
ñCall up the edit function.
IScroll to new assignment
in the list.
ìConfirm.
Application
The "Internet" is just used as an ex-
ample here.
§Internet§ Press and hold; the appli-
cation is started.
Navigation keys
The navigation key can be assigned a
function for three directions (only ef-
fective in standby mode). The down-
wards movement is assigned to
opening contacts and cannot be
modified.
ISelect the desired
direction.
ñCall up the edit function.
IChoose application from
the list.
ìConfirm selection.
Number keys
Number keys 2 to 9 can be used as
speed dialling numbers for fast ac-
cess to functions.
Number key 1 is reserved for the mail-
box phone number (page 66).
Additional information
The service provider may have already as-
signed functions to all the keys (e.g. access
to "SIM services" or direct call-up of the In-
ternet portal). It may not be possible to
modify this key assignment.
Settings84
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (84) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Assigning numbers or functions
ISelect the key.
ñCall up the edit function.
IChoose application from
the list.
ìConfirm selection.
Apply
Start a stored application
(e.g. Internet).
In standby mode:
3Press briefly.
The assignment of the number key 3
is displayed above the right softkey
e.g.:
§Internet§ Press and hold.
Or simply
3press and hold.
Key tones
Set the type of acoustic key
acknowledgement.
Tune, Tone, Silent
Show features
Show the functions set for the
number keys
85Settings
right page (85) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Call setup
C¢T¢Call setup
¢Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Forward
Select the condition under which
calls should be diverted to your mail-
box or another phone number. To
set diversion:
ISelect condition,
e.g. Unanswered.
ñConfirm change, then
select Set.
JEnter phone number.
§Options§ Open, then select Save.
All calls
All calls are diverted.
ÇSymbol in the top line of
display in standby mode.
Unanswered b
Includes the conditions Not reachable,
No reply, Busy, see below.
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated, you will hear
the call waiting tone during a call.
Receiving fax b
Fax calls are diverted to a number
with a fax connection.
Receiving data b
Data calls are diverted to a phone
number with a PC connection.
Settings86
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (86) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and
displayed.
Clear all b
All set diverts are cleared.
Call screening b
Only calls from phone numbers that
are in Contacts or on the SIM card or
assigned to a group are signalled au-
dibly. Other calls are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for B ).
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g. when the SIM
card is changed).
Reactivating divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm number.
87Settings
right page (87) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Phone setup
C¢T¢Phone setup
¢Select function.
Language
Display language
Set the language for the display text.
When Automatic is set, the language
of your service provider is used.
If a language that you do not under-
stand happens to be set, the phone
can be reset to the language of your
home service provider with the fol-
lowing input (in standby mode):
* # 0 0 0 0 # A
Input language
Select the language for text input.
Languages supported by T9 are
marked with the T9 symbol.
T9 import
Load database for T9 support for the
current language.
T9 export
Save database for T9 support for the
current language to My stuff.
Key tones
Set the type of acoustic key
acknowledgement.
Tune, Tone, Silent
Info tones
Set service and alarm tones:
On/off Activate/deactivate tones.
Extended If switched on, a wider
range of service tones is
available, e.g.: end of
menu, network connec-
tion interrupted.
Automatic switch off
The phone switches off each day at
the set time.
Switching on
Set Select.
JEnter time
(24-hour-clock).
§Save§ Save.
Switching off
Switch off Select.
ìConfirm.
Settings88
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (88) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
File system
Format
(Phone-code protected)
The phone memory is formatted and
all saved data such as ringtones,
pictures, games, etc. is deleted.
Formatting may take longer than
1minute.
Format card
Format the RS MultiMediaCard.
Eject card
Remove the RS MultiMediaCard
without loss of data while the phone
is switched on.
License mgr.
The licensed data or applications can
be displayed and managed (see also
DRM, page 21).
Phone identity
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
EPress several times to dis-
play additional informa-
tion about the device.
Device test
After the last information page, a
self-test as well as individual tests
are offered. If you select Self test, all
individual tests are carried out.
Memory assis.
The memory assistant will help you if
there is insufficient phone memory.
If required it can also be started au-
tomatically from applications.
After their capacities have been
checked, all files and folders are dis-
played along with their size and may
be viewed/opened and, if necessary,
deleted.
Software version
Display the software version for your phone
in standby mode:
* # 0 6 #, then press E.
89Settings
right page (89) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Device manag.
The device manager can be used, for
example, to transfer configuration
data from the service provider via
WAP push (page 60).
The phone default setting varies
from service provider to service
provider:
The settings have already been
implemented by the service pro-
vider. You can start immediately.
Access profiles have already been
created by your service provider.
Then select profile and activate.
The access profiles must be con-
figured manually. If necessary,
contact your service provider. You
will also find the current settings
for the service provider on the In-
ternet at
www.siemens.com/
mobilephonescustomercare
under "FAQ".
Active access
ISelect function.
§Start§ Establish a connection to
the active profile.
Profile active
After the data has been transferred:
§OK§ Confirm.
No profile active
The list of profiles is chosen for you
to choose from.
ISelect profile.
ìActivate the profile.
Or
§Options§ Open menu, then select
Edit and make entries.
Last connection
öThe data for the last con-
nection is displayed.
Fact. settings
The phone is reset to the default val-
ues (factory setting). This does not
affect SIM card and network settings
or data saved during Instant
Messaging.
Alternatively, in standby mode
enter:
* # 9 9 9 9 # A
Settings90
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (90) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Clock
C¢T¢Clock
¢Select function.
Time/date
The clock must be set to the right
time once at start-up.
ñStart editing.
JFirst enter the date
(day/month/year), then
the time (hours/min-
utes/seconds).
Time zones
The time zone can be selected in the
world map or a city list:
World map
FSelect the desired time
zone.
City list
ISelect a city in the
selected time zone.
Or
§Options§ Open menu and select
Search city.
Time format
Select 24h or 12h.
Date format
Select the display format for the
date.
Start of week
Select the weekday on which the
monthly and weekly view on the left
starts.
Buddhist date b
Switch to the Buddhist year (not on
all phone models).
Show clock
Activate/deactivate time display in
standby mode.
Auto time b
Time and time zone are set automat-
ically. The time zone is detected
automatically.
Additional information
÷Display the calendar to select
the date.
If the battery is removed for longer than
30 seconds, the clock must be reset.
91Settings
right page (91) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Security
C¢T¢Security
¢Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for a specif-
ic (pre-determinable) time. This pre-
vents the phone from being used ac-
cidentally. However, you can still be
called and you can still make an
emergency call.
HSelect Set.
JEnter time in minutes and
seconds after which the
keypad lock is to be
activated.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (page 35).
Only ¡b
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually be-
fore dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
This SIM only b
(PIN2 or phone-code protected)
The phone can be connected to a
SIM card once the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Certificates
Display certificates for secure data
connections.
Codes
For description, see page 20:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
Additional information
The keypad can also be locked and un-
locked directly in standby mode.
In each case:
#Press and hold.
Settings92
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (92) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Call blocking b
Barring restricts the use of your SIM
card (this is not supported by all serv-
ice providers). You need a 4-digit
network password for network bar-
ring which your service provider will
give you. You may need to be regis-
tered separately for each barring.
All outgoing
All outgoing calls except emergency
numbers are barred.
Outgoing intl.
(Outgoing international)
Only national calls can be made.
Out.int.x home
(International outgoing without home coun-
try)
International calls are not permitted.
However you can make calls to your
home country when abroad.
All incoming
The phone is barred for all incoming
calls (forwarding all calls to mailbox
provides a similar effect).
When roaming
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
Status check
Status check for network barrings.
Clear all
All barrings are deleted. A password
which the service provider will give
you is necessary for this function.
93Settings
right page (93) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Network
C¢T¢Network
¢Select function.
Line b
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Select line
ñChange the connection.
\Display the current phone
number.
Protected
(Phone-code protected)
You may limit usage to one phone
number.
Network info
The list of GSM networks currently
available is displayed.
ÆIndicates forbidden serv-
ice providers (depending
on SIM card).
Choose netwrk
Network search takes place again if,
for example, you leave your home
network or want to register on a
different network. The search can
take place in Manual (see Network info)
or Automatic mode (see also Preferred
net).
Preferred net
Enter your preferred service provid-
ers here in order of preference for
when you leave your home network
(e.g. if there are differences in
price).
The current service provider is
displayed.
ìShow list of preferred
networks.
<Empty> Select.
ñConfirm change, then se-
lect a new service provid-
er from the list.
Record service provider
again (last entry in the
list):
Furth.network
Select, enter the provider
data and save it.
Additional information
Special settings may be made for each
phone number (e.g. ringtones, call diver-
sion etc.). To do this, first switch to the re-
quired phone number.
Settings94
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (94) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Band selection b
Select either GSM 900, GSM 1800,
or GSM 1900. Make sure that your
service provider also supports the
selected band.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group b
Depending on your service provider,
you can create groups with this serv-
ice. These have access, for example,
to internal (company) information,
or special tariffs apply to them. The
details can be clarified with your
service provider.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group (de-
pending on the network
configuration).
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.
95Settings
right page (95) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings Accessories
C¢T¢Accessories
¢Select function.
Car Kit
Only in combination with an original
Siemens handsfree car kit (see
Accessories). The car kit profile is
activated automatically when the
phone is inserted into the cradle.
Edit profile
See page 72.
Auto answer
(Factory default: off)
Calls are accepted automatically af-
ter a few seconds. Eavesdropping is
possible!
Or
Answer by removing from the cradle
(do not use while driving).
Automatic switch off
(Factory default: 2 hours)
The phone is powered by the car's
power supply. You can adjust the
time between switching off the igni-
tion and the time at which the phone
switches off automatically.
Car loudspk.
Improves playback in certain
circumstances.
Automatic settings
Permanent illumination:
activated.
Auto key lock: deactivated.
Charging the phone battery.
Automatic activation of the Car Kit
profile when the phone is inserted
in the cradle.
Car Kit keys
Key assignment when working to-
gether with Car Kit Comfort.
Auto answer
If you do not notice that your phone has ac-
cepted a call, there is the danger that the
caller may eavesdrop.
Settings96
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (96) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Headset
Only in conjunction with an original
Siemens headset (see Accessories).
If an original Siemens headset is
used the profile is automatically
activated when the headset is
plugged in.
Edit profile
See page 72.
Auto answer
(Factory default: off)
Calls are accepted automatically af-
ter a few seconds (except where the
ringer is switched off or set to beep).
You should therefore be wearing the
headset.
Automatic setting
Accept call with Call key or Call ac-
ceptance key, even when the auto
key lock is activated.
Upload via USB
If the phone is connected with the
data cable to a PC, the battery can al-
so be charged in this way (only with
original Siemens accessories,
page 130).
97Organizer
right page (97) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Organizer
Calendar
C¢Q¢Calendar
You can enter appointments in the
calendar. Time and date must be set
for the calendar to work correctly.
The calendar offers you three views:
Monthly view
Special appointments are
highlighted in colour.
IPress briefly to go
forward/back a week.
Press and hold to go
forward/back a month.
FPress briefly to go
forward/back a day.
ìOpen daily view.
Weekly view
Appointments are shown as a
colour bar on the vertical hour divi-
sion. Conflicting appointments are
highlighted in colour.
FPress briefly to go
forward/back a day.
Press and hold to go
forward/back a week.
IForward/backward by the
hour through the day.
ìOpen daily view.
Daily view
Description of appointment.
FOne day forward/back.
IScroll by the hour or to
next/last entry.
ìDisplay current entry.
Calend. setup
§Options§ Open menu, then
select Calend. setup.
Start of day:
Time when the working day begins.
Start of week:
Weekday on which the monthly and
weekly view on the left starts.
Weekend
Set the days for the weekend.
Show birthdays:
Yes/No
Organizer98
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (98) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Appointments
C¢Q¢Appointments
Appointments are displayed in
chronological order in a list.
Enter new appointment
<New entry>
Select.
Category:
cMemo
Text input for description.
dVoice memo
Create a voice memo.
Shown with alarm.
eCall
Enter phone number to
be displayed with the
alarm.
fMeeting
Text input for description.
gVacation
Enter start and end date.
hBirthday
Enter name and date.
Different input/selection fields are
displayed depending on the type.
The number of fields can be restrict-
ed, see Default at the end of the list.
Description:
Description of nature of
appointment.
Phone number:
Enter a phone number or select one
from Contacts.
Voice memo:
Enter a voice recording, see
Dictat.machine, page 101.
Location:
Location of appointment.
Whole day:
Day-long appointment: yes/no.
Start date:
Date when appointment begins.
Start time:
Time when appointment starts.
End date:
Date when appointment ends.
End time:
Time when appointment ends.
Additional information
÷Insert date from
calendar.
99Organizer
right page (99) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Alarm:
On/off or Silent alert.
JEnter the period of time
before the appointment
and select the time unit:
Minutes, Hours, Days
Recurrence:
Select a timeframe for repeating the
appointment:
No, Daily, Weekly, Monthly, Yearly
Enter a parameter for repeating:
Forever, Until, Events (number)
If Weekly is selected, certain week-
days can be highlighted.
All fields/Fewer fields
In the list, select those fields which
are to be offered for future entries.
§Options§ Open menu.
Save Save appointment.
Information on the alarm
When the set date and time are
reached there is an audio and a
visual alarm.
Alarm type Birthday:
You can send special birthday greet-
ings by SMS, MMS, e-mail or a call via
§Options§. The alarm sounds one day
before the birthday.
Use Pause to set the alarm to repeat.
Additional information
Display above set alarms:
¹Alarm clock
»Appointment
An alarm sounds even when the phone is
switched off. The phone does not go to
standby mode. To deactivate it press any
key.
Organizer100
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (100) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Tasks
C¢Q¢Tasks
A task is displayed like an appoint-
ment in the agenda for the selected
day. However, unlike an appoint-
ment it does not require a time.
When no time is entered the task ap-
pears at the top of the list every day
until it is marked as completed.
The entries are made in the same
way as Appointments (see "Appoint-
ments"). Then:
Status:
Select Done or Outstanding.
Priority:
Select 5 levels from
Lowest to Highest.
Date used:
If activated with Yes, the following
time input option is offered.
Date due:/Due time:
Enter the date and time by which the
task is to be completed.
Alarm: As for Appointments.
Save Save task.
Notes
C¢Q¢Notes
Write and manage brief text notes.
Protect confidential information
with the phone code (do not save
any important data or the PIN for
credit cards etc. here).
Entering a new note
<New entry>
Write a normal note.
<Confidential>
Write a protected note
(phone code).
JEnter text. The first line is
displayed later as a "title"
in the notes list.
ûSave.
101Organizer
right page (101) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Organiser options
Depending on the application used
(Calendar,Appointments, Tasks, Notes)
and the current situation, different
functions are offered.
§Options§ Open menu.
Dictat.machine
C¢Q¢Dictat.machine
Use the dictating machine to record
short voice memos.
Use your phone as a dictating
machine when on the move.
Record a memo as a reminder or
as a note for others.
Add a voice memo to an
appointment in the calendar.
Record a call.
Delete by Delete all entries prior to a
certain date.
Delete done Delete all completed tasks.
Activate/
Deactivate Switch alarm on/off.
Done Set task to completed/in
progress.
(For standard functions see page 24)
Warning!
The use of this feature may be subject to
restrictions under criminal law.
Please inform the other party to the conver-
sation in advance if you want to record the
conversation and please keep such
recordings confidential.
You may only use this feature if the other
party to the conversation agrees.
Organizer102
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (102) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
New recording
Record new
Select. The remaining
time available, as well as
the recording time, are
shown in the display.
ôA brief beep sounds when
the recording starts. Now
dictate the text.
ó/ôSwitch between
pause/record.
§Stop§ End recording.
Recording is saved with a
time stamp. Rename with
§Options§.
Playback (via Media player)
ISelect the desired
recording.
ò/óSwitch between
playback/pause.
D/EPress and hold for fast
forward and rewind.
Dictating machine options
§Options§ Open menu.
Time zones
C¢Q¢Time zones
The time zone can be selected in the
world map or a city list:
World map
FSelect the desired time
zone.
City list
ISelect a city in the
selected time zone.
Or
§Options§ Open menu and select
Search city.
ìSet time zone.
Play Play back current
recording.
Loudspeaker Playback through the
built-in loudspeaker.
Settings Set recording quality:
Low, Medium, High
(For standard functions see page 24)
103Organizer
right page (103) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Remote synchronisation
C¢Q¢Remote sync.
You can use this function remotely
to synchronise the personal data on
your phone (contacts, notes, calen-
dar entries) with externally saved da-
ta. The external data can, for exam-
ple, be saved on a company
computer or the Internet e.g.:
www.siemens-mobile.com/syncml
A request to synchronise data can al-
so be sent via WAP push (page 60).
The user, however, must agree to
the start.
Settings and functions
ISelect the desired
function.
öDisplay.
Active account
Two profiles can be set for
synchronisation.
ISelect profile.
ìActivate the profile.
Set profile:
ñDisplay menu for
changing.
Server sett.
Last sync:
Display the time of the last
synchronisation.
Sync data:
Modified data or All data
Sync instruction:
Two-way, Device update or Server
update
Date range
Limit the time for the synchronisa-
tion of appointments in days/weeks.
Contacts, Appointments, Tasks, Notes
Highlight application(s) whose data
is to be synchronised.
Providers Display the current service
provider.
Homepage: e.g. www.siemens-
mobile.com/syncml
Port: Enter port number,
e.g. 80.
Login: Enter user name
(login name).
Password: Enter password (shown as
a series of asterisks).
Contacts path:, Appointments path:,
Notes path:, Tasks path:
Organizer104
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (104) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Synchronisation
Before synchronisation you must
select a profile (Active account) and a
data area (Sync items:) and enter the
correct path to the data (Server sett.).
Confidential notes are not
transferred.
§Sync§ The computer is selected
and synchronisation
started.
When synchronisation
has been carried out suc-
cessfully, the actions that
have been performed are
displayed on several tabs.
105Extras
right page (105) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Extras
SIM services (optional)
C¢S¢SIM services
Your service provider may offer
special applications such as mobile
banking, share prices, etc. via the
SIM card.
If you have such a SIM card, the SIM
services will appear in the main
menu under "Extras" or directly
above the softkey (on the left).
iSymbol for SIM services.
Where there are several applications,
these are displayed in a SIM services
menu. With the SIM services menu,
your phone is ready to support fu-
ture additions in your service provid-
er's user package. For further infor-
mation, please contact your service
provider.
My applications
To help you organise the applica-
tions you download from the Inter-
net you can use the My applications
folder in My stuff.
For further information, see
page 118.
Calculator
C¢S¢Calc.
The calculator is offered in a basic
version and with an advanced range
of functions.
The input line is in the middle of the
display with two calculation lines
above it.
Beneath it is the matrix with the
calculation functions.
JEnter digit(s).
F/INavigate to functions in
the matrix.
ìAccept function.
JEnter digit(s).
ìApply function. The
result is calculated and
displayed immediately.
Extras106
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (106) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Calculator options
§Options§ Open menu.
Unit converter
C¢S¢Unit converter
You can convert various measure-
ment units in the decimal system
into other measurement units.
Example for Velocity units:
Converting the units/currency
FSelect the source
unit/currency.
HSwitch to the input field.
JEnter the quantity to be
converted.
HSwitch to the selection
field.
FSelect the target meas-
urement unit/currency.
The result is displayed.
You can use both input fields
alternately.
Basic functions
+, -, *, / Basic calculation types
=Result
1/x Reversion
%Convert to percentage
.Decimal point
± Sign change "+" / "–"
§AC§ New calculation
Extended functions:
§Options§ Open menu, then select
Extended mode.
Square root
Square
e Exponent
MS Save displayed number
MR Call up saved number
M+ Insert number from memory
Convert Call up the current
result in the unit
converter.
Clear all Delete all units.
Memory save,
Memory recall,
Memory clear
Save or recall result;
delete memory.
Extended mode/
Basic mode Switch calculator
functionality.
(For standard functions see page 24)
x
x
2
Velocity Energy
Mass Pressure
Time Volume
Area Length
Power Temperature
Currency
Type Units
Velocity Kilometers/h, Meters/sec,
Miles/h, Miles/sec, Knots,
Mach
107Extras
right page (107) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Special key functions:
*Set the decimal point.
#Change the preceding
sign.
Currency
When you call up the function for the
first time, you must enter currencies
into which the conversions are to be
made.
JEnter the name of the
currency (e.g. Euro).
§Options§ Open menu and save the
entry with Save.
Now enter the names and exchange
rates of up to three additional cur-
rencies for conversion.
§Options§ Open menu.
Online status b
The application can be called up
from various other applications,
such as Chat room or from Contacts.
In Online status you can set such at-
tributes as "Availability" or "Mood",
which are visible to subscribers to
Chat room. You can also edit your sta-
tus lists for the respective service
here.
Depending on the service provider
and available services, five tabs are
offered.
Online status
For Instant message:
Available, Busy, Not available
Indicate whether you
can be reached in the
respective service.
§Options§ Select Private area. De-
pending on the choice be-
tween Public, Private or
Hide the following at-
tributes can be seen by all
subscribers, only by mem-
bers of the Private list or by
no-one.
Sign change Change the preceding
sign.
Memory save,
Memory recall Save or recall result.
Edit rate Change the exchange
rate for the base
currency.
Add currency Enter new currency and
exchange rate.
Set as base Use current currency as
base currency.
Calculator Start calculator.
(For standard functions see page 24)
Extras108
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (108) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
My alias: Enter your personal
nickname.
My text: Enter your personal infor-
mation text (access to
saved texts via §Options§).
My logo: Select your personal logo
(start via §Options§ My stuff
or Camera).
My mood: Indicate your personal
mood.
MSG lists b
(Instant Messaging lists)
Access to the following lists:
Pend. requests
Display the current requests for your
personal attributes.
Watcher list
Display who is watching your
attributes.
Private list
Display subscribers who can see all
attributes set to Private.
IM block list
Display all subscribers who can see
no attributes and are blocked for
Chat room.
Info messages
List the messages sent by the service
provider.
Settings
The dependence of Online status
settings on those of the current
profile (page 71) can be
activated/deactivated.
109Extras
right page (109) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Sound recorder
C¢S¢Sound recorder
Use the sound recorder to record
noises and tones for use as ring-
tones. The sound recorder is usually
started from other applications/func-
tions such as assigning a ringtone.
New recording
New entry Select.
The remaining time avail-
able, as well as the record-
ing time, are shown in the
display.
ôA brief beep sounds when
the recording starts.
ò/óSwitch between
pause/record.
§Stop§ The recording is ended
and saved with a time
stamp in My stuff/Sounds.
Start the recording from Sound
recorder:
òPlay back.
Rename the recording via
§Options§.
Start the recording from another
application:
ìBack to application.
Playback (via Media player)
ISelect the desired
recording.
ò/óSwitch between
playback/pause.
D/EPress and hold for fast
forward and rewind.
§Options§ Open menu.
Play Play back current
recording.
Set asöSet the recording as a
ringtone.
contact Assign recorded sounds
to a contact.
Settings Set recording quality:
Low, Medium, High
(For standard functions see page 24)
Extras110
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (110) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Stopwatch
C¢S¢Stopwatch
The stopwatch can work with lap
times and intermediate times.
With Lap timing, each time a time is
taken the stopwatch returns to zero.
With Split timing, the clock continues
to run and the respective intermedi-
ate time is stored (max. 99).
Display, also in standby mode.
ò/õStart, stop or continue,
depending on the
situation.
§Lap /§Split§
Store the current
intermediate/lap time.
Stopwatch options
§Options§ Open menu.
Countdown
C¢S¢Countdown
A set time elapses. The last
4 seconds are indicated by a beep.
At the end a special beep sounds.
Display, also in standby mode.
JEnter period of time
or
Iselect standard timing.
òStart countdown.
Standard timings
It is possible to call up or set five
timings with different countdown
times.
ISelect standard timing.
Change§ Open input field.
JEnter name, then period
of time.
Save§ Save entries.
Start Start the stopwatch.
Next Continue to take an
intermediate time.
Reset Reset to zero.
Stopwatch
list Display saved entries.
Lap timing/
Split timing Switch mode.
(For standard functions see page 24)
Additional information
For Stopwatch and Countdown:
§Stop§ ends the function
prematurely.
§Exit§ or B end only the display, not the
function.
111Extras
right page (111) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Date calculator
Calculate the period between two
specified dates.
JFrom: enter date, then
Until: enter date.
§Calc.§ Start calculation.
ñEdit output units.
FSelect previous/next
value.
My menu
Create your own menu
with frequently used functions,
phone numbers or Internet pages.
The list of 20 entries is preset. You
can, however, change it as you wish.
Using
ISelect the required entry.
ìConfirm.
Or
AIf the selected entry is a
phone number, you can
also call it with the Call
key.
Change menu
You can replace each entry (1–10)
with another entry from the
selection list.
ISelect the required entry.
§Change§ The function list is opened
for selection.
ISelect the new entry from
the list.
ìConfirm. The entry is
saved.
If Phonebook is selected, the phone
number must also be selected; if
Internet is selected, the bookmark
must also be selected.
Conversa. hist.
Read all dialogues from
the last session offline
(deleted next time you
log in).
Alarm clock112
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (112) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Alarm clock
C¢U¢Alarm clock
The alarm sounds at the set time
even when the ringtones or the
phone are switched off. The alarm
clock is activated automatically after
a change is made.
An alarm is ended by pressing any
number key.
ñSet the time for the alarm
call (hh:mm).
Or
ñActivate/deactivate the
alarm clock.
Setting the days for an alarm
§Options§ Open the menu and select
Set days.
ISwitch between the days
of the week.
ñMark or unmark the days
for an alarm.
§Save§ Save the alarm call time.
Alarm clock options
§Options§ Open menu.
¹
Alarm clock
18:45
¹
07:30
MonTueWedThu Fri SatSun
Options ñ Exit
Change Set the alarm call time.
Switch between am
and pm if 12 hour mode
set.
Set days Set the days for an
alarm.
Ringtones Set ringtone.
Clock Set time (page 90).
Auto snooze If user does not react:
snooze only or
deactivate alarm.
(For standard functions see page 24)
Additional information
¹Screen display in standby
mode:
alarm clock activated.
Use Pause to set the current alarm to
repeat.
113Media player
right page (113) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Media player
Starting from an application
When you are viewing a picture/vid-
eo or listening to a melody, the appli-
cation starts a media playback.
Direct number for the media
player
?Press key
or
C¢V
For fast access, all the media files on
your phone are offered on four tabs:
Sounds, Play list, Pictures, Videos
FSelect tab.
ISelect file.
ìStart playback.
Arranging files
After the media player starts the
following tabs are displayed:
Sounds
All AAC, AAC+, AAC++ and MP3 files
are displayed.
Play list
All playlists (file format: .m3u)
are displayed.
Pictures
All supported picture formats are
displayed.
Videos
All supported video formats are
displayed.
All files stored in the phone or on the
RS MultiMediaCard are automatically
shown in a list in the tabs. This list
can be arranged according to the
meta data (ID3 Tags) according to
album, artist, genre or title.
Sounds/Video
Functions for playing back songs or
videos.
ìPlay or pause, depending
on the situation.
FFast forward/rewind while
key is pressed.
ILoad next/previous media
file.
#Switch to full screen
mode and back again.
[/\Set the volume with the
plus/minus keys.
*Switch to mute.
§Stop§ End playback.
For further services, see §Options§
page 114.
Media player114
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (114) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Play list
Several pieces of music are compiled
in a playlist (*.m3u).
§Options§ Open menu, select New
and then Play list.
Playlist options
§Options§ Open menu.
In the simplest case, the playlists
are created on a PC and transferred,
together with the songs, via the
Mobile Phone Manager (see page 26
and page 119) into the Sounds
directory in My stuff.
Pictures
Zoom functions for a displayed
picture.
øZoom function if the
displayed picture has a
higher resolution than the
display. The two softkeys
(+/-) enlarge/reduce the
picture.
F/IThe enlarged picture
detail is moved using
the navigation key.
5Centre picture.
For further services, see §Options§
page 114.
Media player options
§Options§ Open menu.
Different functions are offered de-
pending on the starting situation
and the object.
Add track Add a piece of music.
Remove track Remove a piece of music.
Move track Move piece of music
up/down with the
navigation key.
Centre key functions:
òPlay, play back
óPause
õStop
Play/Pause Play back the current
media file or pause.
Open Select the media source
such as My stuff,
Bookmarks or URL.
New Select an application to
create a new object or a
new playlist for music.
Zoom Activate/deactivate zoom
mode.
115Media player
right page (115) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Set asöSet picture as
Background, Logo, for
example, and sounds, for
example, for Incoming
call, Startup tune.
contact Assign a picture or melody
to a contact.
Edit playlist Edit a playlist (page 114).
Play mode Individual piece of music
Repeat (piece of
music/playlist)
All pieces of music
Introduction; the first 5
seconds of each piece of
music is played.
Slideshow Automatic run-through in
full screen mode. Change
individual picture with
navigation key.
Edit Access to picture editing
(application must be
loaded).
To back-
ground Put Media player into the
background.
Full screen Full screen display of a
picture/video.
(For standard functions see page 24)
Incoming call
An incoming call pauses the playback and
puts the media player into the background.
After the call has ended the playback
continues automatically.
Playback in the background
You can put the media player in the back-
ground in order to work with other applica-
tions. Playback, e.g. of songs, continues.
?Press key repeatedly to
switch: foreground or
background operation.
My stuff116
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (116) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
My stuff
To organise your files, you can use
the file system like a PC file manager.
There are separate folders for the
various data types in My stuff.
C¢N
The list of the folders and files is
displayed (on two tabs if an RS
MultiMediaCard is used).
ISelect file or folder.
ì/öOpen folder and select file
or link.
Depending on the selec-
tion, the file with the as-
sociated application is
opened or the download
started.
Download
Melodies, pictures, games and other
applications are offered on the Inter-
net. Once downloaded, you can ac-
cess these via the phone. Most appli-
cations include instructions. To
download e.g. new pictures, sounds,
the appropriate folders contain the
download function.
Remember that pictures and sounds
may be protected (DRM, page 21).
Some applications and games are
already pre-installed on your phone.
Downloading can, if necessary, take
place in two stages:
Description file only
ÌThe description file is
loaded for information
purposes only. The appli-
cation/game itself must
be loaded separately.
or complete download
ËThe application/game is
completely loaded.
117My stuff
right page (117) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
My stuff options
Different functions are offered de-
pending on the starting situation
and the object.
§Options§ Open menu.
New folder Create a new folder and
name it.
Attributes Display information on file
or folder selected.
Move/Copy Select file(s) or folder,
then select destination
folder and insert with ì.
Format card Format RS MultiMedia-
Card.
Eject card Remove the RS
MultiMediaCard without
loss of data.
License mgr. Handling of DRM rights.
(For standard functions see page 24)
Additional information
You can use the browser to download applica-
tions (e.g. ringtones, games, pictures, anima-
tions) from the Internet.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
buyer bears the sole risk for loss, damage or
faults to the phone or application as well as all
damage and implications arising from the appli-
cation. For technical reasons, such applications
or the retrospective release for certain functions
may be lost if the phone is exchanged/re-deliv-
ered or repaired. In such cases, the buyer is
required to download or release the application
again. Please ensure that your phone has Digital
Rights Management (DRM) so that downloaded
applications are protected from unauthorised re-
production. These applications are then exclu-
sively intended for your phone and cannot be
transferred from this even to create a backup.
Siemens does not warrant, guarantee or accept
any liability for the customer's ability to download
or enable applications again or to do so free of
charge. We recommend that you carry out a
backup from time to time of the applications on
your PC using the "Mobile Phone Manager"
(MPM, page 119). You will find this on the sup-
plied CD-ROM. You can download the relevant
latest version of the MPM from the Internet at:
www.siemens.com/s75
My stuff118
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (118) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Directory structure
Separate folders have already been
created for different data types in
My stuff. These folders cannot be
changed.
RS MultiMediaCard™
The RS MultiMediaCard extends the
memory capacity of your phone by
up to a gigabyte. This permits you,
for example, to store a large number
of pictures, videos or sounds. You
can also use the memory card as a
removable medium.
C¢N
EOpen RS MultiMediaCard
tab
The list of the folders and files is
displayed. The folders and files are
treated as in My stuff. If a file is
opened whose application is in the
phone the file is copied to there.
Folder Description Format
Sounds Sounds, ringtones mp3
aac
aac+
aac++
m3u
mid
amr
wav
Pictures Pictures bmp
bmx
jpg
jpeg
png
gif
Videos Videos 3gp
Topics Loaded theme
(zipped)
sdt
Theme configura-
tion (unzipped)
stc
Phone
Pilot Selection of a
character
sda
Games Java archive jar
Download info jad
Applica-
tions Applications, such
as Photo Editor or
Download Assistant
*
Other Text modules tmo
Voice recordings vmo
Internet pages html
wml
Depending on the service provider, the
structure, content and range of functions in
My stuff may vary.
Additional information
RS MultiMediaCard™ is a trademark of
the
MultiMediaCard Association.
Changing the RS MultiMediaCard™
(see page 17)
119Mobile Phone Manager
right page (119) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Mobile Phone Manager
The MPM (Mobile Phone Manager)
enables you to use extended phone
functions from your PC. The phone
and PC communicate via a data cable
(see Accessories, page 130), IrDA or
Bluetooth.
You can download the latest version
of the MPM software from the
Internet at:
www.siemens.com/s75
Organiser
You can use the organiser to manage
the contacts and appointments you
have stored in your phone and syn-
chronise them between your phone,
Outlook® and other Siemens phones
(including Gigaset). You can use all
Call Control functions from the
organiser.
Call Control
You can dial straight from the organ-
iser at the click of a mouse. It also
makes establishing and managing
conference calls extremely easy –
the parties to the call are displayed
on-screen in a virtual conference
room, allowing you to swap effort-
lessly between the conference call
and a private call and to call and add
new subscribers at the click of a
mouse.
SMS and EMS management
Write EMS and SMS messages from
the convenience of your PC. Use all
the options your PC offers you and
use your sounds and pictures to cre-
ate SMS and EMS messages. You can
read, forward, print, delete and
archive your messages.
Mobile Phone Manager120
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (120) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Backup and restore
With the back-up function, you can
regularly make a back-up copy of
your phone data on the PC. If you ev-
er lose the data on your phone, or re-
place the phone, you can quickly re-
instate all data with the restore func-
tion. Please observe any possible re-
strictions for DRM-protected data.
Bookmark Management
Use your PC to browse on the Inter-
net and define your preferred Inter-
net sites. Save the Internet addresses
as bookmarks on your phone so that
you can quickly call them up at a
later time when you are on the
move.
Phone explorer
You can access the data in your
phone quickly and easily with the
Phone Explorer. The phone is simply
integrated in the data structure of
your PC and handled exactly as if it
was another folder in your PC.
Mobile Modem Assistant
The Mobile Modem Assistant quickly
and easily establishes an Internet
connection via your mobile phone
enabling you to use your PC at home
or when travelling to surf the
Internet.
121Mobile Phone Manager
right page (121) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Picture and photo processing
Picture/photo processing offers you
the opportunity to conveniently cre-
ate, edit and manage pictures and
photos. Filters and effects are of-
fered to help you create colourful,
attractive graphics. The user-friendly
interface makes child’s play of trans-
ferring pictures/photos from or to
the mobile phone, and of changing
the graphic settings.
My stuff
My stuff offers you a convenient op-
tion for managing ringtones, music,
playlists and videos. You can sore
your music files in your phone auto-
matically converting them into a
suitable format.
Plug & Sync
Plug & Sync carries out your routine
tasks for you as you wish.
With "Music > phone" you can al-
ways copy your latest tracks and
playlists automatically to your
phone. With "Photos > PC" you can
transfer your newly taken photos to
your PC.
SmartSync
With SmartSync you can always syn-
chronise your data with Outloo,
OutlookExpress® or Lotus Notes™ as
soon as the phone is connected to a
PC. New and changed contacts are
synchronised in just the same way as
messages and appointments.
Notifier
If your phone is connected to a PC
you will always be notified on the PC
screen, if required, about incoming
calls or messages – even when the
phone is switched to mute.
Questions & Answers122
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (122) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Questions & Answers
If you have any questions about using your phone, visit us anytime at
www.siemens.com/mobilephonescustomercare.For additional help, we have listed
below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at
www.siemens.com/mobilephonescustomercare. Siemens will then send you the
configuration messages. Please follow the instructions contained in those messages.
Problem Poss. causes Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Press On/Off key for at least 2 seconds.
Flat battery. Charge battery. Check charging indicator in the display.
Battery contacts dirty. Clean contacts.
See also below under
"Charging error".
Standby time is too
short.
Frequent use of organiser
and games.
Restrict use if applicable.
Fast search activated. Deactivate speed search (page 94).
Display illumination
switched on.
Switch off display illumination (page 75).
Unintentional keystrokes
(illumination!).
Switch on Auto key lock (page 91).
Charging error
(charge icon not
displayed).
Battery totally discharged. 1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
C to 4C
(+41°F to +113°F).
Make sure the ambient temperature is right, wait for a
while, then recharge.
Contact problem Check power supply and connection to the phone.
Check battery contacts and telephone connection sock-
et, clean them if necessary, then insert battery again.
No mains voltage. Use different mains power socket, check mains voltage.
Wrong charger. Only use original Siemens accessories.
Battery faulty. Replace battery.
123Questions & Answers
right page (123) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
SIM error. SIM card not inserted
correctly.
Check that the SIM card is inserted correctly (page 16).
Dirty SIM card contacts. Clean SIM card with a dry cloth.
SIM card with wrong
voltage.
Use 3V SIM cards only.
SIM card damaged
(e.g. broken).
Carry out a visual check. Have service provider change
the SIM card.
No network
connection.
Weak signal. Move higher, to a window or an open space.
Outside the GSM range. Check service provider’s coverage area.
Invalid SIM card. Complain to the service provider.
New network not authorised. Try manual selection or select a different network
(page 93).
Network call barring is set. Check network barrings (page 92).
Network overloaded. Try again later.
Phone loses
network.
Signal too weak. Reconnection to another service provider is automatic
(page 93). Switching phone off and on again can speed
this up.
Calls not possible. Second line set. Set line 1 ã (page 94).
New SIM card inserted. Check for new barrings.
Charge limit reached. Reset limit with PIN2 (page 43).
Credit used up. Load credit.
Some calls not
possible.
Call restrictions are in place. Barrings can be set by service provider. Check barrings
(page 92).
Impossible to make
entries in Phone-
book/Addressbook.
Phonebook/Addressbook
is full.
Delete entries in the Addressbook/Phonebook
(see Standard functions, page 24).
Voice message not
functioning.
Call divert to mailbox not set. Set call divert to mailbox (page 66).
å flashes to
indicate an SMS.
SMS memory is full. Delete SMS messages (see Standard functions,
page 24) or archive them (page 52).
æ flashes to
indicate an MMS.
MMS memory is full. Delete MMS messages (see standard functions,
page 24).
ç flashes to
indicate an MMS.
Phone memory full. Delete messages, pictures, videos, games or
applications.
Function cannot
be set.
Not supported by service
provider or registration
required.
Contact your service provider.
Problem Poss. causes Possible solution
Questions & Answers124
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (124) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Capacity problems
with, for example,
Games & More,
ringtones, pictures,
videos, SMS
archive.
Phone memory full. Delete files in the relevant areas. You can use the
memory assistant to delete specific files (page 88).
No Internet access,
downloading not
possible.
Profile not activated, profile
settings wrong/incomplete.
Activate or set browser profile. If necessary consult your
service provider.
Message cannot
be sent.
Service provider does not
support this service.
Check with your service provider.
Phone number for service
centre not set or incorrectly
set.
Set service centre (page 54).
SIM card contract does not
support this service.
Contact your service provider.
Service centre too busy. Repeat message.
Recipient does not have a
compatible phone.
Check.
EMS pictures are
not displayed on
the destination
phone.
Destination phone does not
support the EMS standard.
No Internet access
possible.
Incorrect browser profile set,
or wrong or incomplete
settings.
Check browser settings; contact your service provider if
necessary.
PIN error/
PIN2 error
Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM
card according to the instructions. If the PUK (MASTER
PIN) has been lost, contact your service provider.
Phone code error. Three wrong entries. Contact Siemens Service (page 126).
Service provider
code error.
No authorisation for this
service.
Contact your service provider.
Too few/too many
menu entries.
Functions may have been
added or deleted by the
service provider via the
SIM card.
Check with your service provider.
Problem Poss. causes Possible solution
125Questions & Answers
right page (125) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
No fax possible. Wrong settings in the PC. Check settings.
No authorisation for this
service.
Contact your service provider.
Charge meter does
not work.
Charge pulse is not being
transmitted.
Contact your service provider.
Damage
Severe shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry con-
nector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the
phone!
Problem Poss. causes Possible solution
Reset settings to the factory default, page 89: * # 9 9 9 9 # A
Customer Care126
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (126) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Customer Care
Qualified Siemens employees are waiting to
offer you expert information about our
products and installation.
In some countries repair and replace servic-
es are impossible where the products are
not sold through our authorised dealers.
If repair work is necessary, please contact
one of our service centres:
Abu Dhabi .........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brunei ................................................. 02 43 08 01
Bulgaria............................................... 02 73 94 88
Cambodia ........................................... 12 80 05 00
Canada ........................................1 88 87 77 02 11
Chile..................................................8 00 53 06 62
China ...........................................0 21 23 01 71 88
Colombia....................................01 80 07 00 66 24
Croatia ..............................................0 16 10 53 81
Czech Republic.................................2 33 03 27 27
Denmark ............................................. 35 25 86 00
Dubai ................................................0 43 96 64 33
Ecuador ..........................................18 00 10 10 00
Egypt.................................................0 23 33 41 11
Estonia.................................................. 6 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany ......................................0 18 05 33 32 26
Greece ............................................80 11 11 11 16
Hong Kong.......................................... 28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland .................................................. 5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast.......................................... 05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.................................................... 2 72 37 17
Kuwait ................................................... 2 45 41 78
Latvia .................................................... 7 50 11 18
Lebanon.............................................. 01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 70 07 07 00
Luxembourg........................................ 43 84 33 99
Macedonia ........................................0 23 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
We offer fast, individual advice! You have
several options:
Our online support on the Internet:
www.siemens.com/
mobilephonescustomercare
We can be reached any time, any place.
You are given 24 hour support on all as-
pects of our products. Here you will find an
interactive fault-finding system, a compila-
tion of the most frequently asked questions
and answers, plus user guides and current
software updates to download.
When calling customer service, please
have ready your receipt and the phone
identity number (IMEI, to display press
*#06#), the software version (to display,
press *#06#, then E) and if available,
your Siemens Service customer number.
You will also find the most frequently
asked questions and answers in the sec-
tion entitled "Questions & Answers" in this
user guide on page 122.
127Customer Care
right page (127) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman....................................................... 79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Peru ..................................................0 80 05 24 00
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 09 99 66
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ........................................... 62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia ............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand ............................................0 27 22 11 18
Tunisia ................................................ 71 86 19 02
Turkey..........................................0 21 64 59 98 98
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Venezuela....................................0 80 01 00 56 66
Vietnam...........................................84 89 20 24 64
Zimbabwe ........................................... 04 36 94 24
Care and maintenance128
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (128) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Care and maintenance
Your phone has been designed and manu-
factured to the highest of standards and
should be treated with great care. The sug-
gestions below will help you to enjoy your
phone for many years.
Protect your phone from moisture and hu-
midity. Precipitation, humidity and liquids
contain minerals that will corrode elec-
tronic circuits. Nevertheless, should your
phone become wet, disconnect it immedi-
ately from the power supply to avoid elec-
tric shock. Do not place your phone (even
to dry it) on/in a source of heat such as a
microwave oven, oven or radiator. The
phone may become overheated and
possibly explode.
Do not use or store the phone in dusty,
dirty areas. Its moving parts may be
damaged and the casing may become
deformed and discoloured.
Do not store your phone in hot environ-
ments (e.g. vehicle instrument panel in
the summer). High temperatures can
shorten the life of electronic devices,
damage batteries and warp or melt cer-
tain plastics.
Do not store your phone in cold environ-
ments. When the phone warms up again
(to its normal ambient temperature),
moisture can form inside the phone,
which may damage electronic circuit
boards.
Do not drop, knock or shake your phone.
Rough handling can damage internal cir-
cuit boards!
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the phone!
The suggestions given above apply equally
to your phone, battery, charger and all ac-
cessories. If any of these parts is not working
properly, obtain fast and reliable help at our
service centres.
Battery quality statement
The capacity of your mobile phone battery
will reduce each time it is charged/emptied.
Storage at too high or low temperatures will
also result in a graduly capacity loss. As
a result the operating time of your mobile
phone may be considerably reduced, evan
after a rull recharge of the battery.
Regardless of this, the battery has been de-
signed and manufactured so that it can be
recharged and used for six months after the
purchase of your mobile phone. After six
months, if the battery is clearly suffering from
loss of performance, we recommend that
your replace it. Please buy only Siemens
original batteries.
Display quality
declaration
For technological reasons, a few small dots
with different colours may appear in the dis-
play in exceptional cases.
Just remember that the appearance of
brighter or darker dots generally does not
mean that a fault has occurred.
129Product data
right page (129) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Product data
Declaration of conformity
Siemens Information and Communication
mobile hereby declares that the phone
described in this user guide is in compliance
with the essential requirements and other
relevant provisions of European Directive
1999/5/EC (R&TTE). The declaration of
conformity (DoC) concerned has been
signed. Please call the company hotline if
you require a copy of the original or visit:
www.siemens.com/mobiledocs
Technical data
Operating time
Talktime: up to 300 minutes
Standby time: up to 300 hours
The operating time depends upon the re-
spective conditions of use. Extreme temper-
atures considerably reduce the standby
time. You should therefore avoid the leaving
the phone in the sun or on a radiator.
The following applications reduce the stand-
by time and can be deactivated if required:
Flash (page 45)
CB services (page 67)
Screensaver (page 75)
Lighting (page 75)
IrDA (page 78)
EGPRS (page 78)
Bluetooth (page 79)
Fast search (page 94)
GSM class: 4 (2 watt)
Frequency range: 880–960 MHz
GSM class: 1 (1 watt)
Frequency range: 1,710–1,880 MHz
GSM class: 1 (1 watt)
Frequency range: 1,850–1,990 MHz
Weight: 99 g
Size: 103 × 47 × 18.5 mm
(84 cm3)
Li-Ion battery: 820 mAh
Operating
temperature:
–10 °C to 55 °C
(1F to 13F)
SIM card: 1.8 and 3.0 V
RS MultiMediaCard max. 1 Gbytes
Phone ID
You will need the following information if
you lose your phone or SIM card:
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone
(under the battery):
..............................................................
the customer service number of the service
provider:
..............................................................
Lost phone
If you lose your phone or SIM card, contact
your service provider immediately to pre-
vent misuse.
Accessories130
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (130) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Accessories
Fashion & Carry
Carrying Cases
Belt Case FCL-600
Energy
Li-Ion battery EBA-760 (820 mAh)
Spare battery
Travel Charger
Travel Charger EU ETC-500
Travel Charger UK ETC-510
Travel charger with an extended input
voltage range of 100–240 V.
Car Charger Plus ECC-600
Charger for the cigarette lighter socket in
the car. It is possible to make phone calls
during charging.
Desk Top Stand EDS-600
Desk top stand charger for the phone.
Handsfree Portable
Headset Basic HHS-500
Headset HHS-510
Headset with PTT key (push to talk) to ac-
cept and end calls.
Headset Purestyle HHS-610
High quality headset with detachable
earphones and key to make/end phone
calls.
Headset Stereo HHS-700
Stereo headset with key for enjoying music
and making phone calls.
Headset Bluetooth®
HHB-700 with EU mains adapter
HHB-710 with mains adapter for UK
HHB-720 with mains adapter for Australia
Elegant, small Bluetooth® headset that is
very comfortable to wear.
Headset Bluetooth® Stereo HHB-750
Stereo Bluetooth® headset with integrated
display for high quality and convenient
handsfree talking and listening to music.
Office
Data Cable DCA-500
For connecting the phone to the serial
RS232 port of the PC.
Data Cable USB DCA-510
For connecting the phone to the USB port of
the PC. With charging function.
Data Cable USB DCA-540
For connecting the phone to the USB port of
the PC. With charging function.
SyncStation DSC-600
Table support for the phone to facilitate
simultaneous data exchange and telephone
charging. Includes a desktop stand and a
USB data cable.
131Accessories
right page (131) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Multitainment
Flash IFL-600
Plug-in flash module for taking photos in are-
as with low ambient light.
Mobile Music Set IMS-700
The portable Mobile Music Set allows you
to listen to music on your mobile phone
anywhere you go and with excellent sound
quality. You can also play music over the
active loudspeaker so that others can also
share your enjoyment.
Car Solutions
Mobile Holder HMH-765
Holds the mobile phone securely in the vehi-
cle. Ideal for use with headset or Car Kit
Portable.
Mobile Holder Antenna HMH-760
The cradle for connecting an external anten-
na. Ideal for use with headset or Car Kit Port-
able. Can also be used as cradle for
retrofitting your handsfree car kit (from
series 55).
Car Kit Comfort Basic HKC-700
Handsfree kit with first-class digital call qual-
ity and supreme ease of use. Requires an
additional holder for the mobile phone
(Mobile Holder Antenna).
Car Kit Easy HKP-700
Facilitates convenient handsfree talking with
high call quality. With the integrated, rotating
cradle and the flexible microphone position-
ing, the phone can be optimally adjusted to
suit any vehicle interior. The power is sup-
plied via the cigarette lighter socket.
Car Kit Portable HKP-500
The portable handsfree car kit can easily be
moved from one car to another. Simply plug
into the cigarette lighter socket, connect and
talk.
Car Kit Bluetooth® Portable HKW-700
High-tech Bluetooth handsfree car kit with
no cable connection to the mobile phone. In-
stallation is easy - simply plug into the ciga-
rette lighter socket.
Car Kit Bluetooth® HKW-710
Innovative Bluetooth® handsfree kit with an
external display for making in-car calls safely
and conveniently.
Car Kit Bluetooth® SIM HKW-720
Innovative Bluetooth® handsfree kit with an
external display for making in-car calls
safely, conveniently, and with low power
consumption.
Optional Car Kit accessories
Car Data Adapter HKO-690
Car Kit Easy Upgrade HKO-700
Products can be obtained in specialist shops
or you can visit the Siemens Mobile Store
online:
Siemens Original Accessories
www.siemens.com/shop
SAR 132
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (132) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
SAR
INFORMATION ON RF EXPOSURE /
SPECIFIC ABSORPTION RATE (SAR)
THIS MODEL MEETS THE GOVERN-
MENT’S REQUIREMENTS FOR EXPO-
SURE TO RADIO WAVES
Your cellular phone is a radio trans-
mitter and receiver. It is designed to
meet the requirements for exposure
to radio waves established by the
Federal Communications Commis-
sion (FCC, USA) and by Health Cana-
da. These requirements include safe-
ty margins designed to assure the
protection of all persons, regardless
of age and health. They use a unit of
measurement known as the Specific
Absorption Rate (SAR). The SAR limit
is 1.6 W/kg averaged over one gram
of tissue.
The highest SAR value for this device
when tested at the ear was
0.319 W/kg. In positions other than
the head, such as on the body, a sep-
aration distance of 1.5 cm is required.
The highest SAR value in this case
was 0.696 W/kg.
Information about this device model
can be found at
http://www.fcc.gov/oet/fccid
by searching the equipment authori-
zation system using FCC ID: PWX-S75.
As SAR is measured utilizing the de-
vice’s highest transmitting power,
the actual SAR of this device while
operating is typically below that indi-
cated above. This is due to automatic
changes to the power level of the de-
vice to ensure it only uses the mini-
mum level required to reach the net-
work.
Additional Information can be found
on the websites of the World Health
Organization
(http://www.who.int/emf),
the Cellular Telecommunications In-
dustry Association (CTIA) web-site at
www.phonefacts.net,
the Canadian Wireless Telecommuni-
cations Association (CWTA) website
www.cwta.ca
or Siemens
(www.siemens.com/mobilephones).
133U.S. FDA
right page (133) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
U.S. FDA
The U.S. Food and Drug
Administration's (FDA) Center
for Devices and Radiological
Health Consumer Update on
Mobile Phones
FDA has been receiving inquiries
about the safety of mobile phones,
including cellular phones and PCS
phones. The following summarizes
what is know – and what remains
unknown – about whether these
products can pose a hazard to
health, and what can be done to
minimize any potential risk. This in-
formation may be used to
respond to questions.
Why the concern?
Mobile phones emit low levels of ra-
dio frequency energy (i.e., radio fre-
quency radiation) in the microwave
range while being used. They also
emit very low levels of radio frequen-
cy energy (RF), considered non-sig-
nificant, when in the stand-by mode.
It is well known that high levels of RF
can produce biological damage
through heating effects (this is how
your microwave oven is able to cook
food). However, it is not known
whether, to what extent, or through
what mechanism, lower levels of RF
might cause adverse health effects
as well. Although some research has
been done to address these ques-
tions, no clear picture of the biologi-
cal effects of this type of radiation
has emerged to date. Thus, the avail-
able science does not allow us to
conclude that mobile phones are ab-
solutely safe, or that they are unsafe.
However, the available scientific evi-
dence does not demonstrate ad-
verse health effects associated with
the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about
hand-held mobile phones, the kind
that have a built-in antenna that is
positioned close to the user's head
during normal telephone conversa-
tion. These types of mobile phones
are of concern because of the short
distance between the phone's an-
tenna – the primary source of the RF
– and the person's head. The expo-
sure to RF from mobile phones in
which the antenna is located at
greater distances from the user (on
the outside of a car, for example) is
drastically lower than that from
hand-held phones, because a per-
son's RF exposure decreases rapidly
with distance from the source. The
safety of so-called “cordless phones,”
which have a base unit connected to
the telephone wiring in a house and
which operate at far lower power
levels and frequencies, has not been
questioned.
U.S. FDA134
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (134) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
How much evidence is there that hand-
held mobile phones might be harmful?
Briefly, there is not enough evidence
to know for sure, either way; howev-
er, research efforts are on-going.
The existing scientific evidence is
conflicting and many of the studies
that have been done to date have
suffered from flaws in their research
methods. Animal experiments inves-
tigating the effects of RF exposures
characteristic of mobile phones have
yielded conflicting results. A few ani-
mal studies, however, have suggest-
ed that low levels of RF could accel-
erate the development of cancer in
laboratory animals. In one study,
mice genetically altered to be predis-
posed to developing one type of can-
cer developed more than twice as
many such cancers when they were
exposed to RF energy compared to
controls. There is much uncertainty
among scientists about whether re-
sults obtained from animal studies
apply to the use of mobile phones.
First, it is uncertain how to apply the
results obtained in rats and mice to
humans. Second, many of the stud-
ies showed increased tumor devel-
opment used animals that had al-
ready been treated with cancer-
causing chemicals, and other studies
exposed the animals to the RF virtu-
ally continuously – up to 22 hours
per day.
For the past five years in the United
States, the mobile phone industry
has supported research into the safe-
ty of mobile phones. This research
has resulted in two findings in partic-
ular that merit additional study:
1. In a hospital-based, case-control
study, researchers looked for an as-
sociation between mobile phone use
and either glioma (a type of brain
cancer) or acoustic neuroma
(a benign tumor of the nerve
sheath). No statistically significant
association was found between mo-
bile phone use and acoustic neuro-
ma. There was also no association
between mobile phone use and glio-
mas when all types of gliomas were
considered together. It should be
noted that the average length of mo-
bile phone exposure in this study
was less than three years.
When 20 types of glioma were con-
sidered separately, however, an as-
sociation was found between mobile
phone use and one rare type of glio-
ma, neuroepithelliomatous tumors.
It is possible with multiple compari-
sons of the same sample that this as-
sociation occurred by chance. More-
over, the risk did not increase with
how often the mobile phone was
used, or the length of the calls. In
fact, the risk actually decreased with
cumulative hours of mobile phone
use. Most cancer causing agents in-
crease risk with increased exposure.
An ongoing study of brain cancers by
the National Cancer Institute is ex-
pected to bear on the accuracy and
repeatability of these results.1
135U.S. FDA
right page (135) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
2. Researchers conducted a large
battery of laboratory tests to assess
the effects of exposure to mobile
phone RF on genetic material. These
included tests for several kinds of ab-
normalities, including mutations,
chromosomal aberrations, DNA
strand breaks, and structural chang-
es in the genetic material of blood
cells called lymphocytes. None of
the tests showed any effect of the RF
except for the micronucleus assay,
which detects structural effects on
the genetic material. The cells in this
assay showed changes after expo-
sure to simulated cell phone radia-
tion, but only after 24 hours of expo-
sure. It is possible that exposing the
test cells to radiation for this long re-
sulted in heating. Since this assay is
known to be sensitive to heating,
heat alone could have caused the ab-
normalities to occur. The data al-
ready in the literature on the re-
sponse of the micronucleus assay to
RF are conflicting. Thus follow-up re-
search is necessary.2
FDA is currently working with govern-
ment, industry, and academic groups
to ensure the proper follow-up to
these industry-funded research find-
ings. Collaboration with the Cellular
Telecommunications Industry Associ-
ation (CTIA) in particular is expected
to lead to FDA providing research rec-
ommendations and scientific over-
sight of new CTIA-funded research
based on such recommendations.
Two other studies of interest have
been reported recently in the
literature:
Two groups of 18 people were ex-
posed to simulated mobile phone
signals under laboratory conditions
while they performed cognitive
function tests. There were no
changes in the subjects' ability to
recall words, numbers, or pictures,
or in their spatial memory, but they
were able to make choices more
quickly in one visual test when
they were exposed to simulated
mobile phone signals. This was the
only change noted among more
than 20 variables compared.3
In a study of 209 brain tumor cas-
es and 425 matched controls,
there was no increased risk of
brain tumors associated with mo-
bile phone use. When tumors did
exist in certain locations, howev-
er, they were more likely to be on
the side of the head where the
mobile phone was used. Because
this occurred in only a small
number of cases, the increased
likelihood was too small to be sta-
tistically significant.4
In summary, we do not have enough
information at this point to assure the
public that there are, or are not, any
low incident health problems associ-
ated with use of mobile phones. FDA
continues to work with all parties, in-
cluding other federal agencies and in-
dustry, to assure that research is un-
U.S. FDA136
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (136) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
dertaken to provide the necessary
answers to the outstanding questions
about the safety of mobile phones.
What is known about cases of human
cancer that have been reported in users
of hand-held mobile phones?
Some people who have used mobile
phones have been diagnosed with
brain cancer. But it is important to
understand that this type of cancer
also occurs among people who have
not used mobile phones. In fact,
brain cancer occurs in the U.S. popu-
lation at a rate of about 6 new cases
per 100,000 people each year. At
that rate, assuming 80 million users
of mobile phones (a number increas-
ing at a rate of about 1 million per
month), about 4800 cases of brain
cancer would be expected each year
among those 80 million people,
whether or not they used their
phones. Thus it is not possible to tell
whether any individual's cancer
arose because of the phone, or
whether it would have happened an-
yway. A key question is whether the
risk of getting a particular form of
cancer is greater among people who
use mobile phones than among the
rest of the population. One way to
answer that question is to compare
the usage of mobile phones among
people with brain cancer with the
use of mobile phones among appro-
priately matched people without
brain cancer. This is called a case-
control study. The current case-con-
trol study of brain cancers by the Na-
tional Cancer Institute, as well as the
follow-up research to be sponsored
by industry, will begin to generate
this type of information.
What is FDA's role concerning the safety
of mobile phones?
Under the law, FDA does not review
the safety of radiation emitting con-
sumer products such as mobile
phones before marketing, as it does
with new drugs or medical devices.
However, the agency has authority
to take action if mobile phones are
shown to emit radiation at a level
that is hazardous to the user. In such
a case, FDA could require the manu-
facturers of mobile phones to notify
users of the health hazard and to re-
pair, replace or recall the phones so
that the hazard no longer exists.
Although the existing scientific data
do not justify FDA regulatory actions
at this time, FDA has urged the mo-
bile phone industry to take a number
of steps to assure public safety. The
agency has recommended that the
industry:
Support needed research into pos-
sible biological effects of RF of the
type emitted by mobile phones;
Design mobile phones in a way
that minimizes any RF exposure
to the user that is not necessary
for device function; and
Cooperate in providing mobile
phone users with the best possible
137U.S. FDA
right page (137) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
information on what is known
about possible effects of mobile
phone use on human health.
At the same time, FDA belongs to
an interagency working group of
the federal agencies that have re-
sponsibility for different aspects
of mobile phone safety to ensure
a coordinated effort at the federal
level. These agencies are:
National Institute for Occupation-
al Safety and Health
Environmental Protection Agency
Federal Communications Com-
mission
Occupational Health and Safety
Administration
National Telecommunications and
Information Administration
The National Institutes of Health also
participates in this group.
In the absence of conclusive information
about any possible risk, what can con-
cerned individuals do?
If there is a risk from these products –
and at this point we do not know that
there is – it is probably very small. But
if people are concerned about avoid-
ing even potential risks, there are sim-
ple steps they can take to do so. For
example, time is a key factor in how
much exposure a person receives.
Those persons who spend long peri-
ods of time on their hand-held mobile
phones could consider holding
lengthy conversations on convention-
al phones and reserving the hand-
held models for shorter conversations
or for situations when other types of
phones are not available.
People who must conduct extended
conversations in their cars every day
could switch to a type of mobile
phone that places more distance be-
tween their bodies and the source of
the RF, since the exposure level drops
off dramatically with distance. For ex-
ample, they could switch to:
a mobile phone in which the anten-
na is located outside the vehicle,
a hand-held phone with a built-in
antenna connected to a different
antenna mounted on the outside
of the car or built into a separate
package, or
a headset with a remote antenna
to a mobile phone carried at the
waist.
U.S. FDA138
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (138) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Where can I find additional information?
For additional information, see the
following websites:
Federal Communications Com-
mission (FCC) RF Safety Program
(select “Information on Human Ex-
posure to RF Fields from Cellular
and PCS Radio Transmitters”):
www.fcc.gov/oet/rfsafety
World Health Organization (WHO)
International Commission on
Non-Ionizing Radiation Protection
(select Qs & As):
www.who.int/emf
United Kingdom, National Radio-
logical Protection Board:
www.nrpb.org.uk
Cellular Telecommunications In-
dustry Association (CTIA):
www.wow-com.com
U.S. Food and Drug Administra-
tion (FDA) Center for devices and
Radiological Health:
www.fda.gov/cdhr/consumer/
1 Muscat et al. Epidemiological Study of
Cellular Telephone Use and Malignant Brain
Tumors. In: State of the Science Symposi-
um; 1999 June 20; Long Beach, California.
2 Tice et al. Tests of mobile phone signals for
activity in genotoxicity and other laboratory
assays. In: Annual Meeting of the Environ-
mental Mutagen Society; March 29, 1999,
Washington, DC; and personal communica-
tion, unpublished results.
3 Preece, AW, Iwi, G, Davies-Smith, A,
Wesnes, K, Butler, S, Lim, E, and Varey, A.
Effect of a 915- MHz simulated mobile
phone signal on cognitive function in man.
Int. J. Radiat. Biol., April 8, 1999.
4 Hardell, L, Nasman, A, Pahlson, A, Hal-
lquist, A and Mild, KH. Use of cellular tele-
phones and the risk for brain tumors; a case-
control study. Int. J. Oncol, 15: 113-116,
1999.
139FCC/Industry Canada Notice
right page (139) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
FCC/Industry Canada
Notice
Your phone may cause TV or radio in-
terference (for example, when using
a telephone in close proximity to re-
ceiving equipment). The FCC or In-
dustry Canada can require you to
stop using your telephone if such in-
terference cannot be eliminated.
If you require assistance, please con-
tact your local service facility.
This device complies with part 15 of
the FCC rules. Operation is subject to
the condition that this device does
not cause harmful interference.
Ten Driving Safety Tips140
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (140) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Ten Driving Safety
Tips
Your Siemens wireless phone gives
you the power to communicate by
voice – almost anywhere, anytime.
But an important responsibility ac-
companies the benefits of wireless
phones, one that every user must
uphold.
When driving a car, driving is your
first responsibility. When using your
wireless phone behind the wheel of
a car, practice good common sense
and remember the following tips:
Get to know your phone and its features
such as speed dial and redial.
Carefully read your instruction man-
ual and learn to take advantage of
valuable features most phones offer
including, automatic redial and
memory dial – most phones can
store up to 99 numbers in memory
dial. Also, work to memorize the
phone keypad so you can use the
speed dial function without taking
your attention off the road.
When available, use a hands-free device.
A number of hands-free wireless
phone accessories are readily availa-
ble today. Whether you choose an
installed mounted device for your
phone or a speaker phone accessory,
take advantage of these devices if
they are available to you.
Position your phone within easy reach.
Make sure you place your wireless
phone within easy reach and where
you can grab it without removing
your eyes from the road. If you get
an incoming call at an inconvenient
time, let your voicemail answer it for
you.
Suspend conversations during hazard-
ous driving conditions or situations.
Let the person you are speaking to
know you are driving; if necessary,
suspend the call in heavy traffic or
hazardous weather conditions. Rain,
sleet, snow and ice can be hazard-
ous, but so is heavy traffic. As a driv-
er, your first responsibility is to pay
attention to the road.
Do not take notes or look up
phone numbers while driving.
If you are reading an address book or
business card while driving a car, or
writing a “to do” list, then you are not
watching where you are going. It’s
common sense. Don’t get caught in a
dangerous situation because you are
reading or writing and not paying at-
tention to the road or nearby
vehicles.
141Ten Driving Safety Tips
right page (141) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Dial sensibly and assess the traffic.
If possible, place calls when you are
not moving or before pulling into
traffic. Try to plan your calls before
you begin your trip, or attempt to co-
incide your calls with times you may
be stopped at a stop sign, red light or
otherwise stationary. But if you need
to dial while driving, follow this sim-
ple tip – dial only a few numbers,
check the road and your mirrors, then
continue.
Do not engage in stressful or emotional
conversations that may be distracting.
Stressful or emotional conversations
and driving do not mix – they are dis-
tracting and even dangerous when
you are behind the wheel. Make peo-
ple you are talking with aware you
are driving and if necessary, suspend
phone conversations that have the
potential to divert your attention
from the road.
Use your phone to call for help.
Your wireless phone is one of the
greatest tools you can own to pro-
tect yourself and your family in dan-
gerous situations with your phone
at your side, help is only three num-
bers away. Dial 9-1-1 in the case of
fire, traffic accident, road hazard, or
medical emergency. Remember, it is
a free call on your wireless phone.
Use your phone to help others in
emergencies.
Your wireless phone provides you a
perfect opportunity to be a “good Sa-
maritan” in your community. If you
see an auto accident, crime in
progress or other serious emergen-
cies where lives are in danger, call
9-1-1, as you would want others to
do for you.
Call roadside assistance or a special
wireless non-emergency assistance
number when necessary.
Certain situations you encounter
while driving may require attention,
but are not urgent enough to merit a
call to 9-1-1. But you can still use
your wireless phone to lend a hand.
If you see a broken-down vehicle
posing no serious hazard, a broken
traffic signal, a minor traffic accident
where no one appears injured, or a
vehicle you know to be stolen, call
roadside assistance or other special
non-emergency wireless numbers.
Provided by the Cellular Telecommunica-
tions Industry Association (CTIA)
“The wireless industry reminds you to
use your phone safely when driving.”
For more information, please call
1 (888) 901-SAFE, or visit our Web site
at: www.wow-com.com
Intellectual property142
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (142) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Intellectual property
Intellectual Property Restrictions
All Intellectual Property, as defined
below, which is owned by or other-
wise the property of Siemens Infor-
mation and Communications Mo-
bile, LLC ("Siemens"), its affiliates,
partners or suppliers, relating to the
Phone, including but not limited to
accessories, parts or software relat-
ing thereto (the “Phone System”), is
proprietary under federal laws, state
laws and International treaty provi-
sions. Intellectual Property includes,
but is not limited to, inventions (pat-
entable or unpatentable), patents,
trade secrets, copyrights, software,
computer programs, and related
documentation and other works of
authorship. You may not infringe or
otherwise violate the rights secured
by the Intellectual Property. Moreo-
ver, you agree that you will not (and
will not attempt to) disassemble, de-
compile, reverse engineer, prepare
derivative works from, modify or
make any other effort to create
source code from the software. No
title to ownership in the Intellectual
Property is transferred to you
through purchase or possession of
the Phone or its components. All ap-
plicable rights of the Intellectual
Property shall remain with Siemens,
its affiliates, partners or suppliers.
Siemens will have no liability with re-
spect to any claim of patent infringe-
ment which is based upon the com-
bination of the Product or parts
furnished hereunder with software,
apparatus or devices not furnished
by Siemens, nor will Siemens have
any liability for the use of ancillary
equipment or software not fur-
nished by Siemens which is attached
to or used in connection with the
Product, The foregoing states the en-
tire liability of Siemens with respect
to infringement of patents by the
Product or any parts thereof.
Laws in the United States and other
countries preserve for Siemens cer-
tain exclusive rights for copyrighted
Siemens software, such as the exclu-
sive rights to reproduce and distrib-
ute copies of such Siemens software.
Siemens software may be used only
in the Product in which the software
was originally embodied when pur-
chased, and such software in such
Product may not be replaced, copied,
distributed. modified in any way, or
used to produce any derivative there-
of. No other use including, without
limitation, alteration, modification,
reproduction, distribution. or reverse
engineering of such Siemens soft-
ware or exercise of rights in such
Siemens software is permitted. No li-
cense is granted by implication, es-
toppel or otherwise under Siemens
patent rights or copyrights.
143End user license agreement
right page (143) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
End user license agreement
This Software License Agreement
("Agreement") is between You and
Siemens Information and Communi-
cation Mobile, LLC and/or one of its
affiliates ("Licensor"). The Agree-
ment authorizes You to use the Soft-
ware specified in Clause 1 below,
which may be included on Your
phone, stored on a CD-ROM, sent to
You by electronic mail, downloaded
from Licensor's Web pages or servers
or from other sources under the
terms and conditions set forth be-
low. This is an agreement on end us-
er rights and not an agreement for
sale. Licensor continues to own the
copy of the Software and any other
copy that You are authorized to
make pursuant to this Agreement.
Read this Agreement carefully be-
fore installing, downloading or using
the Software. Further, by installing,
downloading and/or using the Soft-
ware, You agree to the terms and
conditions of this Agreement.
1. Software.
As used in this Agreement, the term
"Software" means, collectively:
(i) all the software in Your phone, all
of the contents of the disk(s),
CD-ROM(s), electronic mail and its
file attachments, or other media with
which this Agreement is provided;
(ii) related Licensor or third party
software;
(iii) digital images, stock photo-
graphs, clip art or other artistic works
("Stock Files");
(iv) related explanatory written ma-
terials ("Documentation");
(v) fonts;
(vi) upgrades, modified versions, up-
dates, additions and copies of the
Software, if any, licensed to You by
Licensor (collectively "Updates") and
(vii) any other possible documenta-
tion related thereto.
End user license agreement144
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (144) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
2. End user rights and use.
Licensor grants to You a non-exclu-
sive, non-transferable end user right
to install the Software or use the
Software installed on the phone. The
Software is licensed with the phone
as a single integrated product and
may be used with the phone only as
set forth in these licensing terms.
3. Limitations on end user rights.
(a) You may not copy, distribute, or
make derivative works of the
Software.
(b) You may not use, modify, trans-
late, reproduce or transfer the right
to use the Software or copy the Soft-
ware except as expressly provided in
this Agreement.
(c) You may not resell, sublicense,
rent, lease or lend the Software; ex-
cept You may permanently transfer
all of Your rights as set forth in the
Agreement only as part of a perma-
nent sale or transfer of the phone,
provided the recipient agrees to the
terms of this Agreement.
(d) You may not reverse engineer, re-
verse compile, disassemble or other-
wise attempt to discover the source
code of the Software (except to the
extent that this restriction is expressly
prohibited by law) or create derivative
works based on the Software.
(e) You shall not display, modify,
reproduce or distribute any of the
Stock Files included with the
Software.
(f) You shall not display, modify, re-
produce or distribute any of the pre-
loaded content included with the
software unless permitted as stated
in the User Guide or in the prompts in
the Software. In the event that You
are allowed to display, modify, repro-
duce or distribute certain parts of the
pre-loaded content, You shall review
the "Readme" files associated with
the pre-loaded content (contained
on the CD) to ascertain what rights
You have with respect to such mate-
rials. Pre-loaded content may not be
used in the production of libelous,
defamatory, fraudulent, infringing,
lewd, obscene or pornographic ma-
terial or in any otherwise illegal man-
ner. You agree that You shall only
use the pre-loaded content in a man-
ner that complies with all applicable
laws, including, but not limited to,
applicable restrictions concerning
copyright and other intellectual
property rights. You may not register
or claim any rights in the pre-loaded
content or derivative works there of.
(g) You agree that You shall only use
the Software in a manner that com-
plies with all applicable laws in the
jurisdiction in which You use the
Software, including, but not limited
to, applicable restrictions concern-
ing copyright and other intellectual
property rights.
145End user license agreement
right page (145) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
4. Copyright.
Licensor and/or its software suppliers
and their respective affiliates own
the Software and all rights, including
without limitation including proprie-
tary rights therein, are protected by
international treaty provisions and
other applicable national laws of the
country in which it is being used. The
structure, organization and code of
the Software are the valuable trade
secrets and confidential information.
5. Multiple copies/updates.
If the Software supports multiple
platforms or languages, if You re-
ceive the Software on multiple me-
dia, of if You otherwise receive mul-
tiple copies of the Software, the
number of phones on which all ver-
sions of the Software are installed
shall be one phone. If the Software is
an Update to a previous version of
the Software, You must possess a
valid end user right to such previous
version in order to use the Update
and You may use the previous ver-
sion for ninety (90) days after You
receive the Update in order to assist
You in the transition to the Update.
After such time You no longer have a
right to use the previous version, ex-
cept for the sole purpose of enabling
You to install the Update.
6. Commencement & termination.
This Agreement is effective from the
first date You use or install the Soft-
ware. Your end user rights automati-
cally and immediately terminate
without notice from Licensor if You
fail to comply with any provision of
this Agreement. In such event, You
must immediately delete, destroy or
return at Your own cost and ex-
pense, and without entitlement to
any refund of the purchase price, the
phone and the Software, and all re-
lated material to Licensor.
7. Except as expressly provided
in the limited warranty for the
phone, you acknowledge the Soft-
ware is provided "as is" without war-
ranty of any kind express or implied.
To the maximum extent permitted
by applicable law neither Licensor,
Licensor's Software suppliers or their
respective affiliates, nor the copy-
right holders make any representa-
tions or warranties, express or im-
plied, including but not limited to
the warranties of merchantability or
fitness for a particular purpose or
that the Software will not infringe
any third party patents, copyrights,
trademarks or other rights. There is
no warranty by Licensor or by any
other party that the functions con-
tained in the Software will meet your
requirements or that the operation
of the Software will be uninterrupt-
ed or error free.
End user license agreement146
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (146) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
8. Not fault tolerant.
The Software may contain technoloy
that is not fault tolerant and is not
designed, manufactured, or intend-
ed for use in environments or appli-
cations in which the failure of the li-
censed Software could lead direclty
to death, personal injury, or severe
physical or environmental damage
or financial loss.
9. Limitation of liability.
To the maximum extent permitted
by applicable law, in no event shall
Licensor or Licensor's Software sup-
pliers or their respecitve affiliates
and employees be liable for any lost
profits, revenue, sales, data or costs
of procurement of substitute goods
or services, property damage, per-
sonal injury, interruption of busi-
ness, loss of business information or
for any special, direct, indirect, inci-
dental, economic, cover, punitive,
special or consequential damages,
however caused and whether arising
under contract, tort, negligence, or
other theory of liability arising out of
the use of or inability to use the Soft-
ware, even if Licensor or its Software
suppliers are advised of the possibili-
ty of such damages. Because some
countries/states/jurisdictions do not
allow the exclusion or limitation of li-
ability, but may allow liability to be
limited, in such cases, the liability of
Licensor, its Software suppliers and
their respective affiliates and em-
ployees shall be limited to, at Licen-
sor's option, either (a) return of the
price paid less a reasonable amount
for usage, or (b) repair or replacment
of the Software that does not meet
the limited warranty provided with
the phone and which is returned in
accordance with the requirements of
the limited warranty.
Nothing contained in this Agree-
ment shall prejudice the statutory
rights of any party dealing as a con-
sumer. Nothing contained in this
Agreement limits Licensor's liability
to You in the event of death or per-
sonal injury resulting from Licensor's
negligence if law prohibits such a
limitation. Licensor is acting on be-
half of its software suppliers and
their respective employees and affili-
ates for the purpose of disclaiming,
excluding and/or restricting obliga-
tions, warranties and liability as pro-
vided in this clause 9, but in no other
respects and for no other purpose.
10. Technical support.
Licensor has no obligation to furnish
You with technical support except as
agreed in writing between You and
Licensor in the Limited Warranty pro-
vided with the phone.
147End user license agreement
right page (147) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
11. Export control.
The Software may be subject to ex-
port regulations of the United States
and other countries. You agree that
You shall comply with all applicable
export laws, restrictions and regula-
tions of the United States or foreign
agencies or authorities, and shall not
export, or transfer for the purpose of
re-export, any Software, product or
technical data received under this
Agreement or any Software or prod-
uct produced by use of such techni-
cal data, including processes and
services, in violation of any applica-
ble restrictions, laws or regulations,
or without all necessary approvals.
12. Applicable law & general provisions.
This Agreement shall be governed by
and construed in accordance with
the laws of the State of California
without regard to its conflicts of laws
rules. This is the entire agreement
between Licensor and You relating
to the Software and it supersedes
any prior representations, discus-
sions, undertakings, end user agree-
ments, communications or advertis-
ing relating to the Software.
Menu tree148
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (148) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Menu tree
Contacts >All contacts
Groups
Online status
SIM
Filter
Call records >Missed calls
Calls received
Calls dialed
Delete records
Time/charges >Last call
All incom. calls
All outg. calls
Remain. units
Charge settings
Internet >URL/service provider
Download wiz.
Enter URL
Bookmarks
Internet
History
Saved websites
Camera >Take a photo
Record video
Messages >Create new >SMS
MMS
E-mail
149Menu tree
right page (149) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Messages >Inbox >SMS, MMS
E-mail
WAP push
Draft >SMS, MMS
E-mail
Sent >SMS, MMS
E-mail
Chat room
Voice mailbox
CB services >Receive CB
Read new CB
Topic list
Auto display
Use Topic index
CB languages
Msg. archive >SMS, MMS
E-mail
Templates >Text modules
MMS templates
Msg settings >Zoom in
Emoticons
Save aft. send
SMS setup
MMS settings
E-mail setup
WAP push set.
Menu tree150
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (150) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Organizer >Calendar
Appointments
Tasks
Notes
Dictat.machine
Time zones
Games Remote sync.
Media player
Alarm clock
Extras >SIM services
My applications
Calc.
Unit converter
Online status
Sound recorder
Stopwatch
Countdown
Date calculator
My stuff My menu
Settings >Profiles
Ringtones >Volume
Calls
Messages
Organizer
Alarm clock
Chat room
Games
Startup tune
Shutdown tune
Sound recorder
151Menu tree
right page (151) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings >Topics
Display setup >Background
Logo
Screensaver
Start up anim.
Shutdn anim.
Greeting
Large font
Lighting
Silent alert
Phone Pilot
Connectivity >IrDA
Bluetooth
EGPRS
EGPRS info
B-tooth setup
Configura. set
Fax/data
Shortcuts >Short. Softkeys
Navigation keys
Number keys
Key tones
Call setup >Hide ID
Call waiting
Forward
Call screening
Any key
Minute beep
Menu tree152
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (152) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings >Phone setup >Language
Key tones
Info tones
Auto off
Memory assis.
File system
License mgr.
Phone identity
Device manag.
Fact. settings
Clock >Time/date
Time zones
Time format
Date format
Start of week
Buddhist date
Show clock
Auto time
Security >Auto key lock
Direct call
Only ¡
PIN code
This SIM only
Certificates
Call blocking
153Menu tree
right page (153) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:42)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Settings >Network >Line
Network info
Choose netwrk
Auto network
Preferred net
Band selection
Fast search
User group
Accessories >Car Kit
Headset
Upload via USB
Index154
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (154) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Index
A
Accessories....................................... 130
Addressbook
New entry ...................................... 37
Alarm ................................................. 99
Alarm clock.......................................112
All calls (diversion)..............................85
All incoming (network barrings) .......... 92
Any key to answer .............................. 86
Appointments..................................... 98
Auto display
Clock..............................................90
Time/charges.................................. 43
Auto key lock......................................91
Auto last number redial.......................32
B
Band selection ....................................94
Battery
Charging ........................................ 18
Inserting......................................... 16
Operating times......................18, 129
quality declaration........................128
Big letters ...........................................75
Black list .............................................60
Bluetooth® ......................................... 79
Bookmarks (WAP) .........................68, 69
Browser .............................................. 69
Buddhist year......................................90
C
Calculator ......................................... 105
Calendar............................................. 97
Call
Accepting/ending ........................... 32
Blocked .......................................... 92
Charges.......................................... 43
Conference..................................... 34
Diverting ........................................ 85
Ending............................................31
Menu .............................................35
Putting on hold...............................33
Rejecting ........................................ 32
Toggling (swapping).......................33
Call back............................................. 32
Call divert........................................... 85
Call screening..................................... 86
Call transfer........................................ 35
Call waiting .................................. 33, 85
Calling................................................ 31
Calls received (call record) .................. 42
Camera .............................................. 44
Car Kit
Setting........................................... 95
Care of phone .................................. 128
CB services ......................................... 67
Certificates......................................... 91
Charges.............................................. 43
Charges/units ..................................... 43
Charging the battery .......................... 18
Charging via USB ................................ 96
Clock.................................................. 90
Codes................................................. 25
Conference ........................................ 34
Connection profiles ............................ 81
Connectivity....................................... 78
Converter......................................... 106
Countdown ...................................... 110
Credit limit ......................................... 43
Currency converter........................... 107
D
Date format........................................ 90
Device manager ................................. 89
Dialling code ...................................... 31
Dialling with number keys .................. 31
Dictating machine ............................ 101
Digital Rights Management................. 21
Display
Illumination ................................... 75
Language....................................... 87
Symbols......................................... 14
Wallpaper....................................... 75
Divert................................................. 85
Driving safety................................... 140
DTMF tones (tone sequences)............. 36
Duration/charges................................ 43
155Index
right page (155) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
E
Earpiece volume .................................31
EGPRS................................................. 78
E-mail
Receiving/reading ........................... 57
Settings.......................................... 58
Writing ........................................... 56
Emergency number ............................ 20
End user license agreement ..............143
Extras ............................................... 105
F
Factory settings ..................................89
Fast access..........................................83
Fast network search............................ 94
Flash .................................................. 45
Formatting (phone memory)...............88
Forwarding (call) ................................35
Frequency range.................................94
H
Handsfree talking................................ 33
Headset
Accessories...................................130
Setting ........................................... 96
Hide ID ...............................................85
Highlighting mode..............................24
Home network....................................93
Hotline ............................................. 126
I
Identity number (IMEI)........................88
IMEI number.......................................88
Inbox..................................................50
Info tones...........................................87
Information services (CB) ....................67
Infrared ..............................................78
Inst. Message...................................... 61
International dialling code ..................31
Internet ..............................................69
IrDA (Infrared) ....................................78
K
Key tones......................................84, 87
L
Last number redial.............................. 31
Legal notices ........................................ 3
Licence Manager ................................ 88
Limit (duration/charges) ..................... 43
Logo .................................................. 75
Loss of phone, SIM card.................... 129
M
Mailbox.............................................. 66
Maintenance of phone ..................... 128
Media player .................................... 113
Memory assistant ............................... 88
Menu tree ........................................ 148
Message
CB.................................................. 67
E-mail ............................................ 56
MMS .............................................. 47
SMS ............................................... 47
Message memory full ......................... 53
Message type ..................................... 53
Microphone on/off.............................. 35
Minute beep....................................... 86
Missed calls (call record)..................... 42
Mobile Phone Manager..................... 119
MultiMediaCard™ ............................. 118
Muting (microphone) ......................... 35
My menu.......................................... 111
My stuff ........................................... 116
N
Network
Barring........................................... 92
Connection .................................... 93
Settings ......................................... 93
Notes ............................................... 100
Number busy...................................... 32
Numbers dialled (call record) .............. 42
O
One number only ............................... 35
Only ¡............................................. 91
Operating times (battery) ........... 18, 129
Organiser ........................................... 97
Index156
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
left page (156) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
P
PC connection.....................................26
Personal greeting................................ 75
Phone code.........................................25
Phone data .......................................129
Phone ID (IMEI)................................... 88
Phone number memo ......................... 31
Phone number transmission on/off...... 85
Phone Pilot ......................................... 77
Phone setup .......................................87
Photo ................................................. 44
PIN
Changing........................................ 25
Control........................................... 25
Entering ......................................... 20
Error............................................. 124
Use................................................. 25
PIN Codes ...........................................25
PIN2 ................................................... 25
POP3 (e-mail)......................................82
Preferred network...............................93
Preventing accidental activation.......... 26
Product data .....................................129
Profiles
Phone............................................. 71
WAP ............................................... 70
Progress.............................................. 70
Prompt ............................................... 32
Provider logo ......................................75
PUK, PUK2 ..........................................25
Putting a call on hold ....................33, 35
Q
Questions & Answers ........................122
R
Receiving signal..................................21
Records .............................................. 42
Reminder............................................ 32
Remote synchronisation....................103
Ringtone setting ................................. 73
Ringtones .....................................73, 77
S
Safety precautions................................ 5
Screensaver........................................ 75
Second phone number ....................... 93
Security.............................................. 25
Service centre (SMS)........................... 52
Service tones...................................... 87
Setting time/date................................ 90
Settings.............................................. 71
Short message (SMS).......................... 47
Shown in the display .......................... 14
Shut down animation ......................... 75
Silent alert.......................................... 76
SIM card
Clearing barrings............................ 26
Inserting ........................................ 21
Problems...................................... 123
SIM services (optional) ..................... 105
SMS
Lists ............................................... 52
T9 input ......................................... 28
SMTP (e-mail)..................................... 82
Software version ................................ 88
SOS.............................................. 10, 20
Sound recorder......................... 109, 110
Sound recording............................... 109
Special characters............................... 27
Standard functions ............................. 24
Standby mode.................................... 21
Standby time.............................. 18, 129
Start up animation.............................. 75
Stopwatch........................................ 110
Stor.Internet p.................................... 70
Switching microphone on/off.............. 46
Switching off the phone
Automatic...................................... 87
Manual .......................................... 20
Switching on (phone)......................... 20
Symbols ............................................. 14
Synchronisation ............................... 103
157Index
right page (157) of S75 MINOS, w/o ptt, FCC, us-en, (24.10.2005, 13:41)
© Siemens AG 2003, C:\Daten_itl\BenQMobile\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
T
T9 text input.......................................28
Tasks ................................................ 100
Technical data .................................. 129
Text input
With T9 .......................................... 28
Without T9 .....................................27
Text module ....................................... 30
Themes .............................................. 74
This SIM only ...................................... 91
Time zones ...........................20, 90, 102
Toggling ............................................. 33
Tone sequence (DTMF) .......................36
U
Upper and lowercase letters (T9)......... 27
User group..........................................94
V
Video playback ................................. 113
Voice mailbox..................................... 66
Volume
Earpiece volume............................. 31
Profiles........................................... 71
Ringtone ........................................ 73
W
Wallpaper (display)............................. 75
WAP ................................................... 68
WAP push........................................... 60
White list............................................ 60

Navigation menu