Bendix Commercial Vehicle Systems TX433CS-2 Tire Monitoring Sensor User Manual 710 xxxx 1 0 RV owner
Bendix Commercial Vehicle Systems LLC Tire Monitoring Sensor 710 xxxx 1 0 RV owner
Contents
- 1. User Manual 1 of 3
- 2. User Manual 2 of 3
- 3. User Manual 3 of 3
User Manual 2 of 3
SmarTire Systems Inc. Tire Monitor System Owner’s Manual Draft De-mounting the Tire with Transmitter Installed Remove the tire/wheel assembly from vehicle and deflate completely. Loosen both beads with the bead loosener shoe opposite the valve stem (away from the transmitter which is located near the valve stem). Verify the transmitter location. Orient the wheel to place the transmitter 3 in. to the left of the bead guiding shoe so that the mounting bar will clear the transmitter. When lifting the top bead the tire must be clear of the transmitter. Remove the top bead. Transmitter Valve Set the wheel once more with the transmitter 3 in. to the left of the bead guiding shoe and remove the bottom bead. This will expose the transmitter, which should be checked for correct positioning and a properly snug fit. 2/25/2003 This manual is under review by SmarTire Page 9 SmarTire Systems Inc. Tire Monitor System Owner’s Manual Draft Receiver PN 200.0087 2/25/2003 This manual is under review by SmarTire Page 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2003:04:09 18:22:10-07:00 Create Date : 2003:04:09 18:21:49-07:00 Title : 710-xxxx-1-0-RV-owner.PDF Author : clibera Creator : 710-xxxx-1-0-RV-owner.doc - Microsoft Word Producer : Acrobat PDFWriter 4.05 for Windows NT Page Count : 2EXIF Metadata provided by EXIF.tools