Benq 56E10 S670C GSM PCS Band Cellular Telephone User Manual S660C TC EN

Benq Corporation S670C GSM PCS Band Cellular Telephone S660C TC EN

Contents

Users Manual Part 1 Revised

BenQ S670CMobile Phone User’s Manual
Copyright© 2004. BENQ Corporation. All rights reserved. No part of thispublication may be reproduced, transmitted, transcribed, stored in aretrieval system or translated into any language or computer language, inany form or by any means, electronic, mechanical, magnetic, optical,chemical, manual or otherwise, without the prior written permission ofBENQ Corporation.* This publication includes images from CorelDRAW® 9 which areprotected by the copyright laws of the U.S., Canada and elsewhere. Usedunder license.DisclaimerBENQ Corporation makes no representations or warranties, eitherexpressed or implied, with respect to the contents hereof and specificallydisclaims any warranties, merchantability or fitness for any particularpurpose. Further, BENQ Corporation reserves the right to revise thispublication and to make changes from time to time in the contents hereofwithout obligation of BENQ Corporation to notify any person of suchrevision or changes.
Safety Information iSafety InformationFor your safety, please read the guidelines below carefullybefore you use your phone:Exposure to Radio Frequency SignalsYour wireless handheld portable telephone is a low power transmitter andreceiver. When it is ON, it receives and also sends out radio frequency(RF) signals.European and international agencies have set standards andrecommendations for the protection of public exposure to RFelectromagnetic energy.•International Commission on Non-Ionizing Radiation Protection(ICNIRP) 1996•Verband Deutscher Elektringenieure (VDE) DIN- 0848•Directives of the European Community, Directorate General V inMatters of Radio Frequency Electromagnetic Energy•National Radiological Protection Board of the United Kingdom, GS 11,1988•American National Standards Institute (ANSI) IEEE. C95.1- 1992•National Council on Radiation Protection and Measurements (NCRP).Report 86•Department of Health and Welfare Canada. Safety Code 6These standards are based on extensive scientific review. For example,over 120 scientists, engineers and physicians from universities,government health agencies and industry reviewed the available body ofresearch to develop the updated ANSI Standard.The design of your phone complies with these standards when usednormally.Max. SAR measurement: EU : GSM900: 1.25 W/kg; DCS1800: 0.104 W/kg.USA : PCS1900: 1.09 W/kg.• Specific operating restrictions,no metallic component allowed in body-worn accessories
ii Safety InformationAntenna CareUse only the supplied or approved replacement antenna. Unauthorizedantennas, modifications or attachments may damage the phone andviolate FCC regulations. Phone OperationNormal Position: Hold the phone as you would any other telephone withthe antenna pointed up and over your shoulder.For your phone to operate most efficiently, do not touch the antennaunnecessarily when the phone is in use. Contact with the antenna affectscall quality and may cause the phone to operate at higher power level thanotherwise needed.BatteriesAll batteries can cause property damage, injury or burns if a conductivematerial such as jewelry, keys or beaded chains touches exposed terminals.The material may complete electrical circuit and become quite hot. Toprotect against such unwanted current drain, exercise care in handling anycharged battery, particularly when placing it inside your pocket, purse orother container with metal objects. When battery is detached from thephone, your batteries are packed with a protective battery cover; pleaseuse this cover for storing your batteries when not in use.DrivingCheck the laws and regulations on the use of wireless telephones in theareas where you drive. Always obey them. Also, if using your phone whiledriving, please:•Give full attention to driving--driving safety is your first responsibility.•Use hands-free operation, if available.•Pull off the road and park before making or answering a call if drivingconditions so require.
Safety Information iiiElectronic DevicesMost modern electronic equipment is shielded from RF signals. However,certain electronic equipment may not be shielded against the RF signalsfrom your wireless phone.PacemakersThe Health Industry Manufacturers Association recommends that aminimum separation of six (6") inches be maintained between a handheldwireless phone and a pacemaker to avoid potential interference with thepacemaker. These recommendations are consistent with the independentresearch by and recommendations of Wireless Technology Research.Persons with pacemakers:•Should ALWAYS keep the phone more than six inches from theirpacemaker when the phone is turned ON.•Should not carry the phone in a breast pocket.•Should use the ear opposite the pacemaker to minimize the potential forinterference.If you have any reason to suspect that the interference is taking place, turnyour phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In theevent of such interference you may want to consult your hearing aidmanufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer ofyour device to determine if they are adequately shielded from external RFenergy. Your physician may be able to assist you in obtaining thisinformation.Turn your phone OFF in health care facilities when any regulations postedin these areas instruct you to do so. Hospitals or health care facilities maybe using equipment that could be sensitive to external RF energy.
iv Safety InformationVehiclesRF signals may affect improperly installed or inadequately shieldedelectronic systems in motor vehicles. Check with the manufacturer or itsrepresentative regarding your vehicle. You should also consult themanufacturer of any equipment that has been added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where posted notice so requires.AircraftFCC regulations prohibit using your phone while in the air. Switch OFFyour phone before boarding an aircraft.Blasting AreasTo avoid interfering with blasting operations, turn your phone OFF whenin a “blasting area” or in area posted “TURN OFF TWO-WAY RADIO.”Obey all signs and instructions.Potentially Explosive AtmospheresTurn your phone OFF and do not remove the battery when in any areawith a potentially explosive atmosphere and obey all signs andinstructions. Sparks, from your battery, in such areas could cause anexplosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not alwaysclearly marked. They include fueling areas such as gasoline stations; belowdeck on boats; fuel or chemical transfer or storage facilities; vehicles usingliquefied petroleum gas (such as propane or butane); areas where the aircontains chemicals or particles, such as grain, dust, or metal powders; andany other area where you would normally be advised to turn off yourvehicle engine.
Safety Information vFor Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT place objects, including bothinstalled or portable wireless equipment, in the area over the air bag or inthe air bag deployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, serious injury could result.
vi Safety Information
viiTable of ContentsTable of ContentsSafety Information ...........................................................i1. Preparing Your Phone For Use................................... 1Inserting a SIM Card............................................................ 1Installing a Battery and Charging the Phone ...................... 2Turning the Phone On......................................................... 52. Getting to Know Your Phone .....................................7Your Phone at a Glance........................................................ 7Active Flip Feature.............................................................. 10Status Indicator Light......................................................... 10Standby Screen.................................................................... 11External Display .....................................................................11Icons in the External Display's Status Bar.............................12Main Screen ............................................................................14Icons in the Main Display's Status Bar..................................16Using the Keys in the Standby Mode ....................................18Menu Navigation................................................................ 233. Using Your Phone ..................................................... 33Making a Phone Call .......................................................... 33Ending a Phone Call........................................................... 33Answering a Phone Call ..................................................... 34Rejecting an Incoming Call................................................ 35Turning Off the Ring Tone for an Incoming Call .......................................................... 35Making an International Call............................................. 35
viii Table of ContentsMaking an Emergency Call ................................................ 36Dialing an Extension Number ........................................... 36Speed Dialing ...................................................................... 36Voice Dialing ...................................................................... 36Listening to Voicemails...................................................... 37Phone Book......................................................................... 38Adding Contacts to the Phone Book.....................................38Finding Contacts in the Phone Book ....................................42Using a Location Number to Access a Contact's Data .........45Last Missed, Dialed, and Received Calls............................ 46Operations During a Call................................................... 48Call Menu ........................................................................... 49Using the Silent Profile....................................................... 52Camera Function................................................................ 53Shortcuts Menu .................................................................. 58Setting Function Shortcuts ....................................................58Setting Phone Number Shortcuts..........................................60Using Function and Phone Number Shortcuts ....................61Messages Menu................................................................... 62Create ......................................................................................64Short Message..............................................................................64MMS ............................................................................................67SIM Folder ..............................................................................72Inbox .......................................................................................73Template .................................................................................78SMS Template .............................................................................78MMS Template ...........................................................................78
ixTable of ContentsOutbox ....................................................................................78Drafts.......................................................................................79Voicemail ................................................................................80Message Settings .....................................................................80Cleanup Messages...................................................................85Memory Status .......................................................................85Voice Memo........................................................................ 86Input Modes ....................................................................... 87Changing the Text Input Mode.............................................87Letter Input Mode (ABC) ......................................................88Numeric Input Mode (123)...................................................88Predictive Input Mode (iTap) ...............................................88Symbol Input Mode ...............................................................90Direct Connection to URLs ............................................... 914. Menus.........................................................................93Phone Book......................................................................... 93Find .........................................................................................93Add..........................................................................................93Edit ..........................................................................................93Copy ........................................................................................94Delete ......................................................................................94Caller Groups..........................................................................94Privacy Manager.....................................................................96Business Card .........................................................................97Activate ...................................................................................98My Number ............................................................................98SIM Status...............................................................................98
xTable of ContentsCall Records ........................................................................ 99Missed Calls ............................................................................99Received Calls .........................................................................99Dialed Calls.............................................................................99Delete All.................................................................................99Call Duration........................................................................100Call Cost................................................................................101Messages............................................................................ 102Organizer .......................................................................... 103Calendar................................................................................103To Do List .............................................................................105Note.......................................................................................106Tools.................................................................................. 106Camera..................................................................................106Alarm Clock..........................................................................107Shortcuts ...............................................................................108Voice Memo .........................................................................108Calculator..............................................................................109Currency Converter .............................................................109Stopwatch .............................................................................111Countdown Timer ...............................................................111Memory Status .....................................................................112Service Number ....................................................................112SIM Toolkit Menu................................................................112Games................................................................................ 113Champion Soccer .................................................................113Dragon Fight.........................................................................118
xiTable of ContentsInternet.............................................................................. 119WAP Service .........................................................................119Start Browser .............................................................................120WAP Message............................................................................126Enter Address ............................................................................126Resume ......................................................................................126Clear Cache ...............................................................................126WAP Settings.............................................................................126JAVA .....................................................................................130Multimedia ....................................................................... 134Picture...................................................................................134Animation.............................................................................135Melody ..................................................................................135My Melodies..............................................................................135Composer .................................................................................. 137Help ...........................................................................................140Album ...................................................................................140Settings .............................................................................. 145Date & Time .........................................................................145Time...........................................................................................145Format ....................................................................................... 145Secondary Time........................................................................146Power On/Off .......................................................................146Profiles ..................................................................................147Display ..................................................................................151Theme........................................................................................ 151Wallpaper .................................................................................. 151Welcome Message.....................................................................152Contrast ..................................................................................... 153Brightness .................................................................................. 153
xii Table of ContentsBacklight Setting .......................................................................153OLED Duration.........................................................................153OLED Animation Setting .........................................................154Audio.....................................................................................154Power Saving Mode..............................................................154Call Settings ..........................................................................155Call Divert .................................................................................155Call Barring ...............................................................................156Call Waiting...............................................................................157Auto Redial................................................................................157Show Number ...........................................................................157Fixed Dial Number ...................................................................158Active Line.................................................................................158Connect Alert ............................................................................158Minute Beep ..............................................................................159Network ................................................................................159Mode Selection..........................................................................159Available List .............................................................................159Band Setting ..............................................................................160Connection Mode .....................................................................160Security .................................................................................160PIN Code...................................................................................160Phone Lock................................................................................161SIM Lock ...................................................................................161Screen Lock ...............................................................................162Language ...............................................................................163Input Mode...........................................................................163Flip Activate..........................................................................163User Group ...........................................................................163Restore ..................................................................................164
xiiiTable of Contents5. Care and Maintenance ............................................ 1656. Troubleshooting......................................................166
xiv Table of Contents
Preparing Your Phone For Use 1Preparing Your Phone For UseInserting a SIM Card1. Turn the phone over, and release the battery latch. Lift the battery offthe phone.2. Slide the SIM card in under the metal plate in the SIM card slot, withthe SIM card's metal contacts facing down and the cut corner at thetop right.Do not remove the battery when the phone is on. Doing so couldcause you to lose personal settings or data stored either on your SIMcard or in the phone's memory.A SIM card can be easily damaged if its metal contacts becomescratched. Therefore, take special care when holding or inserting it.Battery latchSIM card Metal plate
2Preparing Your Phone For UseInstalling a Battery and Charging the Phone1. With the battery's metal contacts facing down, align the protrudingtabs on the end with the holes in the battery bay of the phone. Thenpush the battery toward the end of the bay to insert the battery's tabsinto the holes. Press down to click the battery in place./If you wish to remove the SIM card, youmust first press down the stay, then pushthe SIM card out of the slot.Stay SIM card
Preparing Your Phone For Use 32. Insert the charger connector into the charger socket on the bottom ofthe phone. Make sure that the connector is inserted in the correctorientation (with the arrow pointing up).3. Insert the charger into a power outlet.4. Once the phone is fully charged, remove the charger from both thepower outlet and the phone.Charger connector Charger socket
4Preparing Your Phone For Use/•Charging requires approximately 4 hours.•When charging the phone while it is turned off, the external andmain displays will be activated, and the status indicator light willflash blue (during the charging process, the external display willshow the time and cycle through 3 animations, then turn offtemporarily. This is normal.•During charging, in the external display's battery indicator ,the lines showing the battery power level will scroll until the batteryis fully charged.•When charging while the phone is turned off, the main displayshows the animation. If the charging is performed while thephone is on, the main display shows the icon. The linesshowing the battery power level will scroll until the battery is fullycharged.•After the battery is fully charged, the status indicator light will flashpurple.•When the battery is out of power, the phone will play an alert soundto remind you to recharge it and then will automatically turn off.Do not remove the battery while the phone is charging.
Preparing Your Phone For Use 5Turning the Phone On1. Open the phone's flip.3. Enter your PIN1 number. If you enter the PIN1 number incorrectly,press (Clear) to delete the incorrect numerals. Press andhold to delete all numerals that have been entered. Aftercompleting entry of your PIN1 number, press to confirm.8The PIN (Personal Identification Number) is a password provided bya network operator with a SIM card. You need this password in orderto use the SIM card.4. When the PIN code entered has been accepted, the phone will/•You can select and set a welcome animation, image, or messagethat will display when you turn on your phone, as well as the musicthat will be played. Go to the menu: Settings → Display →Welcome Message. For details, please refer to page 152.•If the welcoming music goes on too long, once the standby screencomes up, you can press to stop playback.If you enter the PIN incorrectly 3 times in a row, the SIM card will lockdown and no longer be usable. If this happens, you must enter thePUK (Personal Unblocking Key) for that SIM card in order to unlockit. Please contact your network operator to obtain a PUK./To cancel PIN password authentication, go to the menu Settings →Security → PIN Code → PIN1 Code. Please see page 160.2. Press and hold to turn the phone on. Thephone will display the welcome animation.
6Preparing Your Phone For Useautomatically search for the designated network. This search processmay take a few seconds.6. After you open the phone book on the SIM card, any data youbrowse, store, or delete will be from the SIM card's phone book. Ifyou open the phone book in the phone's memory, any data that youview, store, or delete will be from the phone's phone book.7. The standby screen will be displayed, as well as network signalstrength and the name of the network operator. You can now use thephone.8If the phone cannot detect the network, the on-screen signal strengthmeter will show no bars.8If the phone links to a network that you are not authorized to use, thesignal strength meter will show a level of zero. You will only be able tomake emergency calls./If at some later point, you wish to switch phone books, go to thefollowing menu Phone Book → Activate.5. The phone will then ask you whether you wish toactivate the phone book stored in the phone'smemory or on your SIM card. Press tohighlight the desired phone book and then press to open the phone book you have selected.
Getting to Know Your Phone 7Getting to Know Your PhoneYour Phone at a GlanceThe figure below shows the main parts of your phone:Front view 1External speakerExternal displayAntenna Status indicator light
8Getting to Know Your PhoneFront view 2EarpieceMain display MicrophoneRight soft keyScroll keyOK keyDial/Answer keyAlphanumeric keysPower on/off keyMessages menu keyLeft soft key
Getting to Know Your Phone 9Side and back viewsHands-free headset/Data cable jackVolu me ke yNeck strap socketDC lensMirror used to take self photos
10 Getting to Know Your PhoneActive Flip FeatureOpening the flip allows you to answer an incoming call. Closing the flipends a call, cancels dialing, or rejects an incoming call.Status Indicator LightThe status indicator light has the following functions:•Flashes blue when the phone detects a network or is charging.•Flashes purple when the battery is fully charged.•Flashes blue rapidly when there is an incoming call.8To turn off the status indicator light, you must start up the powersaving mode. Go to this menu: Settings → Power Saving Mode./You can turn the active flip feature on or off. To do so, go to the menu:Settings → Flip Activate.
Getting to Know Your Phone 11Standby ScreenExternal DisplayWhen the flip is closed, the external display's status bar will show iconsfor network signal strength, battery power, and alarm (if active). Thecurrent time and an animation will appear in sequence. The externaldisplay can also alert you to incoming calls, text messages, and missedcalls./•If you wish to set the time shown on the external display, go to themenu Settings → Date & Time → Time. See page 145.•In the default setting, the external display will show the time andseveral animations in sequence for one cycle. The external displaywill then temporarily power off. After it has powered off, you can turnit back on by pressing either the up or down arrow on the volumekey located on the left side of the phone.•You can set the external display's cycling mode by using the menuSettings → Display → OLED Duration. See page 153.•You can choose the animations to be shown on the external displayby using the menu: Settings → Display → OLED AnimationSetting. See page 154.•You can go to the menu Settings → Profiles → Personal tochange the name of the profile to your own user name. When thisprofile is activated and the phone's flip is opened, your own namewill appear on the external display. For details, see page 148.
12 Getting to Know Your PhoneIcons in the External Display's Status BarIcon Function DescriptionSignal strength Signal strength of the network. The morebars indicated, the stronger the signal.Battery statusShows the current level of battery power.The more bars indicated, the more powerthat remains. Four bars: fully charged. Nobars: immediate charging needed. Whencharging the phone, the icon will scrollthrough the bars until the battery is fullycharged.Text messageShows that a text message is being receivedor that there are unread text messages. Ifthe icon flashes, this indicates that theSIM card's text message memory is full. Forinformation about the text message function,see page 62, "Messages Menu".VoicemailIndicates that there are voicemails (this iconwill only appear if the function is supportedby your network vendor).AlarmThe alarm is turned on. To set the alarm, goto the menu Tools → Alarm Clock. Seepage 107.Vibrating alertIn the standby screen, press and hold downthe key to activate the vibrating alert.See page 52, "Using the Silent Profile".NormalShows that the Normal profile is in use. Toset the profile, go to this menu: Settings →Profiles. See page 147.Meeting Shows that the Meeting profile is in use.
Getting to Know Your Phone 13Outdoors Shows that the Outdoors profile is in use.Personal Shows that the Personal profile is in use.Handsfree Shows that the Handsfree profile is in use.DivertShows that the call divert function isactive.To set the call divert function go to themenu Settings → Call Settings → CallDivert. See page 155. Roaming Roaming has been activated (not yourregular network)Icon Function Description
14 Getting to Know Your PhoneMain ScreenTime and dateStatus barName of networkoperatorSoft key bar Wallpa p erPress to enterthe Phone BookPress to use thecamera function.Press to enterthe main menu.
Getting to Know Your Phone 15/•You can set the animation or image you wish to use as wallpaperwhen the phone is in standby mode by going to the menuMultimedia → Picture or Animation. Alternatively, you can go tothe menu Settings → Display → Wallpaper. See page 134 andpage 151.•To set the current time and date, as well as the format in which theywill be shown in the main display's standby screen, go to the menuSettings → Date & Time. See page 145.•You can go to the menu Settings → Profiles → Personal tochange the name of the profile to your own user name. When thisprofile is activated, your own name will appear in the standbyscreen on the main display. For details, see page 148.•For enhanced security, you can use the screen lock function. Go tothe menu Settings → Security → Screen Lock. If the screen lockis activated, and you have not performed any tasks with the phonefor a set time, the phone will automatically bring up the screen lockimage. The purpose is to protect any personal data on your phonefrom being read by other persons. To restore the original displayscreen, you must enter a password that you provide for thisfunction. For details on settings, see page 162.•After the standby screen remains for 10 seconds, the soft key bar,time and date, as well as all the other words currently displayed willautomatically disappear, showing the full-screen wallpaper. You canalso press to display/hide the status bar and words normallyshown on the standby screen.
16 Getting to Know Your PhoneIcons in the Main Display's Status BarIcon Function DescriptionSignal strength Signal strength of the network. The morebars indicated, the stronger the signal.Battery statusShows the current level of battery power.The more bars indicated, the more powerthat remains. Four bars: fully charged. Nobars: immediate charging needed. Whencharging the phone, the icon will scrollthrough the bars until the battery is fullycharged.GPRS network GPRS services have been activated on yourSIM card.Text messageShows that a text message is being receivedor that there are unread text messages. Ifthe icon appears in red, this indicatesthat the SIM card's text message memory isfull. For information about the text messagefunction, see page 62, "Messages Menu".VoicemailIndicates that you have voicemail messages(this icon will only appear if the function issupported by your network operator).AlarmThe alarm is turned on. To set the alarm, goto the menu Tools → Alarm Clock. Seepage 107.Line in useShows the number of the line currently inuse. To set the line, go to the menu Settings→ Call Settings → Active Line. For details,see page 158.
Getting to Know Your Phone 17VibrateIn the standby screen, press and hold toactivate the silent profile. See page 52,"Using the Silent Profile".NormalShows that the Normal profile is in use. Toset the operating mode, go to the menuSettings → Profiles. See page 147.Meeting Shows that the Meeting profile is in use.Outdoors Shows that the Outdoors profile is in use.Personal Shows that the Personal profile is in use.Handsfree Shows that the Handsfree profile is in use.DivertShows that the call divert function is active.To make settings for this function, go to themenu Settings → Call Settings → CallDivert. See page 155.Roaming Roaming has been activated (not yourregular network)Icon Function Description
18 Getting to Know Your PhoneUsing the Keys in the Standby Mode8In this user manual, "long-press" means to press and hold down a keyfor about two seconds before release. "Press" means to press a keyand release immediately.8The chart below is meant only to introduce the commands accessiblewith keys when the phone is in standby mode. For information onother key commands available in other operating modes, see thepertinent sections in this user manual.Function keys/•When any key is pressed, the phone will provide aural feedbackthrough keypad tones. To activate or cancel this aural feedback,enter the menu Settings → Profiles. Scroll to the profile currentlyin use and press (Edit). Then select Keypad Tone. You canalso go to Settings → Audio → Keypad Tone to turn the auralfeedback on or off. See page 149 and page 154.•After turning the phone on, press any key to activate keypad anddisplay backlighting. To turn the backlighting on or off, and to set theduration of backlighting, go to Settings → Display → BacklightSetting. See page 153.
Getting to Know Your Phone 19Key Commands and functionsPower on/off key•Long-press to turn the phone on or off.•Press this key to reject incoming calls or cancel a callbeing dialed.Send/Answer key•Press to send or answer a call.•Long-press and your phone will automatically call thelast number dialed.•Press to access the list of last missed/dialed/receivedcalls.OK key•Press to open up the main menu and show its first item.Left soft key•Press to access the Phone Book (when PBook isshown).•Press to save the phone number keyed in from thestandby screen to the Phone Book (when Save isshown).Right soft key• Press this key to use the camera function (whenCamera is shown). •Press this key to delete entered digits one by one; long-press to delete all digits entered (when Clear is shown).•Long-press to turn the silent profile on or off.
20 Getting to Know Your PhoneScroll key•Press to open the main menu and show its firstitem.•Press to enter the menu for function and phonenumber shortcuts. For information about the shortcutsmenu, see page 58.•Long-press to activate voice dialing.•Long-press to activate the voice memo function.Messages menu key•Press this key to enter the Messages menu. For adescription of the Messages menu, see page 62.Asterisk key•Press this key to enter an asterisk " * ".•To make an international call, long-press this key untilthe display shows "+" ,Then enter the recipient's countrycode, area code and phone number.Voicemail key•Long-press to dial your voicemail number.# key•Press to enter "#".•For extensions: After entering a phone number, long-press to enter a "P" and then enter the extensionnumber.Key Commands and functions
Getting to Know Your Phone 21~Alphanumeric keys•Press to enter digits in a phone number.•Shortcut key: Long-press a key to immediately accessthe function, or dial the number, that it represents. Seepage 58, "Shortcuts Menu".Volu me ke y•Long-press the upper or lower portion of this key,located on the left side of the phone, to adjust the ringtone volume. Press the upper portion of this key or to increase the volume. Press the lower portion of thiskey or to decrease the volume.8When there is an incoming call, long-press theupper portion of the volume key to reject the call;long-press the lower portion to turn off the ringtone.Key Commands and functions
22 Getting to Know Your PhoneAlphanumeric keys8Long-pressing an alphanumeric key will access the function itrepresents, or dial the number that has been assigned to it (shortcutfunction).Key Digit Key Digit/Symbol/Function172839405 * + (long-press)6# P(long-press after entering a phone number)
Getting to Know Your Phone 23Menu NavigationWhen the phone is in standby mode, press or to bring up the mainmenu and highlight the first item in that menu: Phone Book.8For details on how to use the various functions listed in the menu, seepage 93, "Menus".Main menu/You can choose a display color for the menus by going to the menuSettings → Display → Theme. See page 151.Indicates that pressing will return the display to the standby screen.Each icon represents a sub-menu.The main menuitem to which youhave scrolled willbe displayed as ananimation.The name of themain menu itemyou have scrolledto.
24 Getting to Know Your PhoneSub-menusPop-up menusPress to return to the previous menu or screen.Press to enter the sub-menu represented by highlighted item or to activate the highlighted function.The highlighted row is the currently selected item.The name of thecurrent menu.Press to enter the highlighted menu item for editing.Press to scroll up ordown to an item. Press to bring upthe previous screen. Press to bring up thenext screen.Press to scroll upor down to an item.Press to enter the highlighteditem or activate the functionrepresented by the item.Press to open apop-up menu.Press to close apop-up menu.
Getting to Know Your Phone 25Turning a function on or offPress to turn the selected function on or off (the currently selected function will be highlighted).After the selected function is activated, the display will usually show further setting options. Press to scroll to the desired setting option.Press or to edit the setting.Press to confirm thesetting.Press to cancel and return to theprevious screen.
26 Getting to Know Your PhoneMenu navigation exampleThe example given below demonstrates how to use menus to change thelanguage setting.Regular access1.In the standby mode, press or to open the mainmenu.2.In the main menu, press to scroll to the Settings menuicon. Press to enter thismenu.3.In the Settings menu, press to scroll to the Languageitem (press to bring upthe next screen, or press to bring up the previousscreen), then press toenter the Language menu.
Getting to Know Your Phone 27Access through number shortcuts4.Press to scroll to thelanguage you wish to use.Then press to confirmyour selection. If, for example,you wish to set English as thedisplay language, scroll tohighlight English, and thenpress . The display willautomatically return to theSettings menu, displayed inEnglish.5.Press (Back) repeatedly orpress once to return tothe standby screen.1.In the standby mode, press or to bring up themain menu.
28 Getting to Know Your Phone2.The location of items in the main menu corresponds to the position of the to keys in the alphanumeric keypad. Thus, pressing will bring up the Settings menu.3.In the Settings menu, the alphanumeric keys to represent menu items 1 to 10. Since Language is item number 10 in the Settings menu, pressing will bring up the Language sub-menu.4.Press the alphanumeric key that corresponds to the language you wish to select, as it is listed in the Language sub-menu. For example, if you wish to set English as the display language, press .
Getting to Know Your Phone 295.Press (Back) repeatedly orpress once to return tothe standby screen.
30 Getting to Know Your PhoneMain menu mapSelect To en terWhen using the phone book stored in your SIM card's memory, the seventh item is SIM Status. There is no Privacy Manager item.
Getting to Know Your Phone 31Select To en terIf your network vendor provides SIM toolkit value-added services, they will appear as item number 11.
32 Getting to Know Your PhoneSelect To en ter
Using Your Phone 33Using Your PhoneMaking a Phone CallOpen the flip and make sure that the standby screen is shown on themain display. Enter the desired number using the alphanumeric keys to . Press to dial your call.To modify a phone number that you have entered, press (Clear) todelete individual digits. Long-press (Clear) or press to deleteall digits entered and return to the standby screen.Ending a Phone CallPress or close the flip to end a call. The display will show the totalcall time, and then return to the standby screen.8If the flip function has not been activated, you cannot end a call orcancel dialing by closing the flip. To activate or cancel the flipfunction, go to the menu Settings → Flip Activate.8If you also have a call waiting or on hold, after you press , thedisplay will show a menu to allow you to choose the call you wish toend./During a call, you can use the options. See page 49, "Call Menu"./To cancel a call that is being dialed, press or close the flip.
34 Using Your PhoneAnswering a Phone CallWhen a call is received, your phone rings or vibrates, with the displayshowing the caller's number (if supported by your network vendor). Ifthe caller is a contact stored in the Phone Book, the phone will show thename recorded in the Phone Book.Depending on whether your phone's flip is open or closed, you can doone of the following to answer a call:•If the flip is closed, opening it will allow you to answer the call.8If the flip function has not been activated, you cannot answer a call byopening the flip. To activate or cancel the flip function, go to the menuSettings → Flip Activate.•If the flip is already open, press to answer the call.8If you wish to change the answering mode so that you can press anykey to answer a call, go the menu Settings → Profiles. Afterselecting the currently active profile, press (Edit) and go toAnswer Mode → Any Key./•If the caller is a member of a caller group, the ring tone assigned tothis group will sound. The display will show the animation that isassociated with this group as well, to help you identify the caller.•For information on how to set up caller groups in the Phone Book,see page 38, "Adding Contacts to the Phone Book".
Using Your Phone 35Rejecting an Incoming Call•Regardless of whether the flip is open or closed, you can reject anincoming call by long-pressing the upper portion of the volume key on the left side of the phone.•When the flip is open, you can reject an incoming call by closing theflip or pressing .8If the flip function has not been activated, you cannot close the flip toreject an incoming call. To activate or cancel the flip function, go tothe menu Settings → Flip Activate.Turning Off the Ring Tone for an Incoming Call Regardless of whether the flip is open or closed, you can temporarilymute the ring tone for an incoming call to avoid disturbing others. Todo this, long-press the lower portion of the volume key on the leftside of the phone. After the ring tone has been turned off, you can stillopen the flip to answer the call.Making an International Call1. Enter the outgoing international call code, or long-press until"+" appears on the display.2. Enter the recipient's country code, area code and phone number.Dial the call by pressing .
36 Using Your PhoneMaking an Emergency CallTo call emergency services, enter 112 (the international emergencynumber) and then press to dial the call. You can make anemergency call even if your phone is locked or cannot access yournetwork, or there is no SIM card inserted, so long as you are withinrange of a network of the type supported by your phone.Dialing an Extension NumberAfter you enter a telephone number, long-press , The phonedisplay will show "P". At this point, you can enter the desired extensionnumber, and then press to dial it.Speed Dialing8You must assign a number key as the shortcut for a particular phonenumber in order to use speed dialing for that phone number. Forinformation on how to set up a shortcut, see page 58, "ShortcutsMenu".After you have assigned a number key to serve as the shortcut key for aparticular phone number, you can long-press this key when the phoneis in the standby mode to dial the corresponding phone number. Forexample, if you have selected as the shortcut key for a certainphone number, long-pressing will dial this number.Voi ce D i alin g1. In the standby mode, long-press .2. After a beep, when the display shows the "Recording…" screen, youcan speak the voice dialing prompt for the number you wish to dial.Once the phone has correctly identified the contact associated withthis voice dialing prompt, two situations may occur:
Using Your Phone 37a. If there is only one phone number stored for the contactidentified, your phone will automatically dial this number.b. If there are two or more phone numbers stored for the contactidentified, the display will show the contact's Phone Book data.You can then scroll to the number you wish to dial, pressing or to make the call.8To use voice dialing to make a call, you must have stored a voicedialing prompt for the desired number in Phone Book. For details, seepage 38, "Adding Contacts to the Phone Book".Listening to VoicemailsWhen your voicemail inbox contains new messages, your networkvendor will send a text message notifying you that you have newvoicemail messages (if the network vendor supports it, the icons and will be shown in the external and main display's status bars,respectively. There are two ways to access and listen to voicemail:1. When the phone is in standby mode, long-press to directly dialthe voicemail phone number and listen to your voicemail messages.2. Go to the menu Messages → Vo ic em a il to dial the voicemail number.8If the voicemail number is not stored on your SIM card or in the phoneitself, you will not be able to access your voicemail by long-pressing ,Generally speaking, network operators will store thevoicemail number on a SIM card before giving it to you. If so, you willbe able to dial your voicemail number by long-pressing whenthe phone is in standby mode, without needing to first manually storethis number. If however your network vendor did not store the numberon your SIM card, you will need to do this yourself. To save or modifya voicemail phone number, go to the menu Messages → MessageSettings → Voicemail No.
38 Using Your PhonePhone BookAdding Contacts to the Phone BookThe Phone Book will have different formats and data headingsdepending on whether you have chosen to use a phone book stored onyour SIM card or in your phone's memory.8The phone book in your phone's memory can store up to 500contacts. The capacity of a phone book on your SIM card depends onthe particular service provided by your network vendor.SIM card Phone BookThe data fields provided by a SIM card phone book are as follows:The contact's name.The contact's mobile phone number.1. In the standby screen, enter the phone number thatyou wish to store, then press (Save). The screenwill show the Phone Book data fields for a newcontact.2. Press to scroll to the contact data field that you wish to edit.Press (Edit), or simply begin keying in data to enter andedit the currently selected field. After completing data entry andsettings, press to store the data for this contact.
Using Your Phone 39Used to select a caller group for the contact. Press to select agroup and then press .When there is an incoming call from this contact, the ring toneassigned to this group will sound and the display will show theanimation/image associated with the group.8To set a ring tone and animation/image for each caller group,go to the menu Phone Book → Caller Group. See page 94.8You can also go the menu Phone Book →Caller Group toset a caller group for a contact.
40 Using Your PhonePhone Book in the phone's memory3. After completing the data for the various fields, you must press 1. In the standby screen, enter the phone number youwish to store, and then press (Save). The displaywill show the default data fields for a new contact.2. In the contact data screen, scroll to the data fieldthat you wish to edit, and then press (Options)to bring up a pop-up menu. You can then use thefollowing options with the contact data:•Edit: Edit the information in the selected field.8In the contact data screen, press or beginentering data to directly edit the data in thecurrently selected field.•Change Type: Change the category of the phonenumber (for example, from Mobile Number toHome Number). This option can only be used in thephone number data field. •Add New Field: Adds other data fields for a contact.•Delete Field: Removes the selected data field.
Using Your Phone 41in order for the contact's data to be stored in the Phone Book.8If you do not wish to save a modified Phone Book record, press or (Back) to abort.8You can also add a new contact by going to the menu Phone Book→ Add.•The default data fields for a contact are as follows:•In addition to the contact data fields described above, you can alsoadd the data fields listed below by pressing (Option) when thePhone Book screen is visible and then selecting Add New Field.The contact's name.The contact's mobile phone number.The contact's home phone number.The contact's e-mail address.Used to assign a contact to a caller group. Press to select agroup, and then press .Used to assign a voice dialing prompt to a phone number. After thebeep, speak the contact's name into the microphone. After it issuccessfully recorded, the phone will play back this voice dialingprompt.The contact's mobile phone number.The contact's home phone number.The contact's work phone number.
42 Using Your PhoneFinding Contacts in the Phone BookThere are two ways to locate a specific contact in the Phone Book:Other phone number for the contact.The contact's home address.The contact's work address.The contact's company name.The contact's department name.The contact's job title.Used for notes about the contact.Used to mark dates of special significance associated with thecontact.Used to set a ring tone for the contact. When there is an incomingcall from the contact, the phone will play this ring tone.8A ring tone set in this field will replace the one associatedwith the contact's caller group, if any.Used to set the animation/image that will appear on the phone'sdisplay when there is an incoming call from the contact.8The animation/image set in this field will replace theanimation/image associated with the contact's caller group, ifany.In the standby mode, press (PBook) todisplay contacts stored in the Phone Book.
Using Your Phone 43•Press to scroll through the names (listed in alphabetical order)until the one you want is highlighted.•Press the alphanumeric key that corresponds to the first letter of thename you wish to locate the appropriate number of times. Forinstance, if the name starts with "K", you would press twice for"K". The names starting with "K" will appear, with the first onehighlighted. Press to scroll to the name you want.8You can also go to the menu Phone Book → Find, and then enterthe full name or the first letter of the name to locate a contact.When the desired contact's name is highlighted, you can do one of thefollowing:•Press to dial the first phone number saved in that contact.•Press (Option) to bring up a pop-up menu, which contains thefollowing items:Edit: Edit the Phone Book data for this contact. When you arefinished, press . For more information on editing, see page38.8If you do not wish to save a modified Phone Book record, press (Back) or to abort.Copy to SIM (Phone): If you are currently using a phone bookstored in the phone's memory, you can copy the contact's data tothe phone book stored on your SIM card. Conversely, if you arecurrently using a phone book stored on your SIM card, you cancopy the contact's data to the phone book stored in the phone's
44 Using Your Phonememory. 8The only information that can be copied from a phone bookstored in the phone's memory to the one on your SIM card is acontact's name, phone number, and caller group. If a contact hasmore than one phone number associated with it, when thatcontact's data is copied from the phone to the SIM card's phonebook, each phone number will be stored as separate contact.Delete: Erases the contact's data from the Phone Book.Send vCard: Attaches the contact's data to a message and send itto others. For details on writing and sending a message, see page64.Scroll to the number that you wish to dial, and then press or.Scroll to the desired data field. If the complete contents cannot bedisplayed on the screen, or there is no content to display (forexample, Note ), press to display the complete contents(if the data field is for a voice dialing prompt , you can press to play the sound of this voice dialing prompt.Press (Option) to bring up a pop-up menu that contains thefollowing items:•Edit: Used to edit the Phone Book data for this contact. Forinformation on editing, see page 38.8If you do not wish to save a modified Phone Book record,press or (Back) to abort.•Press to show the information in all data fieldsfor that contact. You can then perform the followingtasks:
Using Your Phone 45•Copy to SIM (Phone): If you are currently using a phonebook stored in the phone's memory, you can copy thecontact's data to the phone book stored on your SIM card.Conversely, if you are currently using a phone book stored onyour SIM card, you can copy the contact's data to the phonebook stored in the phone's memory.•Delete: Erases the contact's data from the Phone Book.•Send: Dial the currently highlighted number.Using a Location Number to Access a Contact's DataTo access data for a contact while the phone is in standby mode, enterthe location number for this contact, and then press . The displaywill show the data for the contact stored at this location. For example, to display the contact data stored in the fifth position inthe Phone Book, you would press and then .When the contact's data appears, you can perform the following tasks:•Scroll to the number that you wish to dial, and then press or to dial this number.•Press (Option) to edit, copy, or delete the data for this contact, ordial the currently highlighted number (equivalent to the Sendoption)./A contact's location number represents theposition where this contact's data is stored inthe phone book on your SIM card or in yourphone's memory. Location number
46 Using Your PhoneLast Missed, Dialed, and Received CallsThere are two ways you can view the last missed, dialed, and receivedcalls on your phone, as well as information on their date and time:1. If there have been any missed calls, the display will show a missed callmessage along with the number of calls that were missed.Press (View), and then press to scroll to the desired phonenumber.8The icon will appear beside missed calls; the icon willappear beside dialed calls; the will appear beside receivedcalls.8If a phone number has already been stored in the information for acontact in the Phone Book, the display will show the name of thiscontact.8If a call for the same number has been missed, dialed, or receivedtwo or more times, a note such as "x02" will appear beside the recordof the call to show the number of times it was missed, dialed, orreceived.8If your network operator is not able to display a certain call's number,the list will not show a number for the call.2. In the standby mode, press to view the listof the most recent missed, dialed, and receivedcalls. Press to scroll to the desired phonenumber.
Using Your Phone 47When the number for a missed, dialed, or received call is highlighted,you can perform the following tasks:•Press to re-dial the number.•Press (Option) to bring up a pop-up menu:Call: Dial the phone number.Save (Edit): If the phone number for the call has not been storedin the Phone Book, select the Save option to create a contact forthis number in the Phone Book. If this phone number is alreadystored under a contact in the Phone Book, select the Edit optionto edit this information for this contact. For information aboutediting Phone Book data, see page 38, "Adding Contacts to thePhone Book".Delete: Erases the record of the call from the list.Delete All: Erases all the calls in the list.•Press to display the details on this call.This name of the contact for thecall (if the phone number has notbeen stored in the Phone Book,"Unknown" will be displayed.The date and time ofthe last time this callwas made.The phone numberfor the call.Press (Option) to selectwhether to dial the number, storeor edit it, or erase the record of thecall.
48 Using Your PhoneOperations During a Call8The following options marked with an asterisk (*) are dependent onnetwork support on may require a subscription.Adjusting the Earpiece VolumeDuring a call, you can press the volume key on the left side of thephone to adjust call volume.MutePress (Mute) to turn off the microphone. The person on the otherend of the line will not be able to hear your voice. To restore themicrophone's function, press (Unmute).Putting a Call on Hold*1. When the only call is active:a. Press (Hold) to hold this call.b. Press to end this call. 2. When the only call is on hold:a. Press (Unhold) to resume the call.b. Press to end this call.3. When there is an active call and a call on hold.a. Press (Swap) to resume the call that is on hold, and putthe active call on hold.b. Press to show on the display a list of calls that you canend.
Using Your Phone 49Making a Second Call*Enter a phone number, or select one from the phone number or callrecord, and then press to dial it. The currently active call willautomatically be placed on hold. However, if there is already one activecall and another on hold, this action will fail.Call Waiting*If there is an incoming call while you are on the phone, a tone willsound through the earpiece and the display will show that a second callis currently waiting. You can handle the waiting call and currently activecall in the following ways:1. Answer the waiting call: Press The currently active call willautomatically be placed on hold. However, if there is already anothercall on hold, a menu will appear on the display allowing you to selecta call to end and then answer the waiting call.2. Reject the waiting call: Press or (End). Pressing (End)will immediately reject the waiting call; pressing will bring up amenu on the display that you can use to select a call to end.Call MenuIf you press during a call, it will bring up the call menu. Press to scroll to the desired item (press to scroll through the menu pageby page) and then press to enter that item; press (Back) toreturn to the pervious menu; press to return directly to the callmenu.8Items marked with an asterisk (*) depend on network support andmay require a subscription.
50 Using Your PhonePhone BookAccesses data in the Phone Book. For details, see page 38, "PhoneBook".Call RecordsAllows you to view information on missed, received, and dialed calls.See page 46, "Last Missed, Dialed, and Received Calls".Conference*Conference calls allow you to converse with more than one party at atime. The conference menu contains the following options:8The maximum number of parties that can be accommodated during aconference call depends on the particular service provided by anetwork vendor.Hold/Unhold/Swap*Toggles the call status.Join/PrivateAdds a party that is on hold to the current conference call, orisolates a single party in a conference call and puts all other partieson hold.ForwardAllows two parties to connect, while ending one's own call (one ofthe two parties may be involved in an active call while the other iseither on hold or being dialed), so as to allow the two parties tohave their own call.
Using Your Phone 51Send DTMFWhen the phone is connected with other devices or services, you cansend DTMF (Dual Tone Modulation Frequency) strings. DTMF stringsare keypad tones that can be sent via the microphone as you dialanother number. Your phone will emit the tones in order tocommunicate with answering machines, pagers, computerizedtelephone services, and so forth.Enter the phone number and then press to send the DTMF string.End CallEnd AllEnds all calls, whether active or on hold.End ActiveEnds only the active call.End HoldEnds only a call or calls on hold.End OneEnds only a single call.Hold/Unhold/SwapToggles the call status.Mute/UnmuteActivates/cancels the silent mode.SMSEnters the SMS (Short Message Service —i.e. text message) menu. Fordetails on the SMS menu, see page 62, "Messages Menu".
52 Using Your PhoneCalculatorAllows you to use the calculator. For information about the calculator,see page 109.STKBrings up the menu for the STK (SIM Toolkit) services provided byyour network vendor.Using the Silent ProfileFrom the standby screen, you can long-press to activate the Silentprofile. Once it is activated, the phone will alert you to an incoming callby vibrating with no ring tone.•When you long-press to activate the Silent profile, the phone willvibrate for one second. The icon will appear in the main display'sstatus bar (the external display will show ) to remind you thatyour phone is currently using the Silent profile.•To cancel the Silent profile and restore the previously active vibrantand ring tone settings, long-press .8To set and select a profile, please enter the main menu's Settings →Profiles. See page 147./This feature is very convenient for switching to the Silent profileduring, say, a meeting to avoid the disruption caused by a ring tone.
Using Your Phone 53Camera FunctionYou can take photos using your phone's embedded camera, and savethem to your phone's memory for use as wallpapers on the standbyscreen, or send them to others through MMS.1. From the standby screen, press (Camera), which will bring upthe view finder.2. Press (Option) to make the following settings for the camera:•Resolution: Set the desired resolution for photo taking. You havethe following resolution values to choose from:8The Face Mask option below will not be available if resolution isset to Low (i.e. 80 x 60).•Light Condition: Based on the light conditions of theenvironment selected in this option, the camera willautomatically adjust the its color balance in order for you to takebest-quality pictures.•Free Space: Shows the amount of remaining available memoryfor storing photos./You can also use the camera by going to the menu: Too ls → Camera.Option Represented ResolutionHigh 640 x 480Medium 320 x 240Low 160 x 120Lowest 80 x 60
54 Using Your Phone•Face Mask: After you have selected this option, the camera's viewfinder will display a mask that is used to position the face of theperson being photographed in good focus, in order for you tolater obtain the best results when changing the person's facialexpressions using the Face Morph function. See page 55 fordetails. To cancel the Face Mask function, press (Option),and then select Normal Preview.3. After you have completed necessary camera settings, press (Back)to return to the view finder screen, and when the object is in focus,press to shoot the object. The photo will then show up on themain display.4. Press (Save) to save this photo to the menu: Multimedia →Album. If you are not satisfied with this photo, press (Back) totake a new photo. After you have saved a photo to the phone'smemory, you can manage this photo using the options below:•Send Photo: This option enables you to send this photo to othersthrough MMS. You can also do so by either selecting the menu:Messages →Create → MMS, or by selecting Multimedia →Album. For details on using the MMS function, see page 67.Please note the following while shooting photos•The external camera does not have a flash. Please take photos in awell-lit area.•When taking photos, do not block or touch the camera lens on theback of the phone.•Always shoot your object with the source of light behind you.•Do not shake the phone when taking photos.•Please be sure that the lens is perfectly clean before taking photos.Use a soft cloth to wipe the lens if it is not clean.
Using Your Phone 55•Set to Wallpaper: Designates this photo as the wallpaper for themain display's standby screen. You can also do so by using themenu: Multimedia → Album, or by using Settings → Display →Wal lpap er → Photo. See page 140 and page 151.•Set to Phonebook: You can use this photo as a phone bookcontact's visual caller ID. When there is an incoming call fromthat contact, the phone's display will show this photo.New Entry: Creates a new contact in the Phone Book anduses the photo as the new contact's caller ID.Exist Entry: Uses this photo as an existing contact's caller ID.Select the contact you want and press to attach the phototo that contact.8This function is only available for contacts saved in the phonememory's phone book. Please go to the menu: Phone Book →Database to select the Phone Book for use.•Rename: Give this photo a new file name.8A photo's name can't be left empty, nor can it share the samename with another photo already stored in your phone.•Details: Shows the photo's name, date, resolution, and file size.•Face Morph: If you have activated the Face Mask option beforetaking someone's photo, after that person's photo is taken andsaved, you will be able to change that person's facial expressionshown in the photo with this Face Morph feature, and then savephotos showing different expressions of that person.Please follow the steps below to perform the Face Morphfunction:
56 Using Your Phonea. After pressing to select the Face Morph option, thescreen will show "Press number key to change," and thenwill bring up the original photo with that person's faceremaining unchanged. At this point, you can press acorresponding number key to generate the desired facialexpression effects for the person's face. The chart belowshows each number key and their matching expressioneffects:8Press (Normal) to show the original photo without anyexpression effects added.b. Press to intensify/reduce expression effects. Intensitylevels will be displayed at the top right corner of the screenranging from 1 to 5; the default value is 2.c. When the photo shows desired expression effects for theperson's face, press , enter this new photo's file name,Key Expression Key ExpressionSmile AngryYoung FunnySlim AlienKiss KoalaSleep MonkeySad Fox
Using Your Phone 57and then press to save this photo to the menu:Multimedia → Album.d. After you have saved the photo showing the expressioneffects you want, the original photo will appear. You canthen again press corresponding number keys to create morephotos showing various facial expressions./•You can also go to the menu: Multimedia → Album toconfigure expression effects for faces shown in the savedphotos. See page 140 for details.•The Face Morph function may not create desired outcomeswhen used to change your pets or dolls' facial expressions.
58 Using Your PhoneShortcuts MenuYou can use the Shortcuts menu to assign 9 alphanumeric keys asshortcuts to commonly used functions or frequently dialed numbers.Entering the Shortcuts MenuSetting Function Shortcuts1. In the Shortcuts menu, press to move theselection box to the number key you wish to use asa shortcut key ( is selected in the example onthe right). You can also press the actualalphanumeric key to select it.2. Press (Option) to bring up a pop-up menu,and use to select Add Function. Then press.From the standby screen, press to enter theShortcuts menu. The numbers 1 to 9 displayed in themenu's default screen represent the corresponding 9alphanumeric keys on the phone.
Using Your Phone 593. From the Add Function menu, press toselect the function to be represented by theshortcut key , and then press .Alternatively, you can press a correspondingalphanumeric key to select the function you want.8The functions listed in the Add Function menuare selected from various other menus. Fordetails on these functions, see page 93, "Menus".4. After has been set as the function shortcutkey, the '1' icon in the shortcut menu screen willbe replaced by the icon for the function assignedto . The top of the screen will display thename of the function currently assigned to thiskey.5. Repeat the above step to add or modify functionshortcut key assignments.6. To cancel a shortcut key and restore the key'soriginal function, use to move the selectionbox to the icon for the shortcut key that you wishto cancel, and then press (Option). SelectDelete to cancel the shortcut. 8If you select Delete All, all shortcut settings willbe cancelled.
60 Using Your PhoneSetting Phone Number Shortcuts1. The method for setting a phone number shortcutkey is largely the same as for a function shortcutkey. After selecting the shortcut key, press (Option) to bring up a pop-up menu. Afterselecting Add Phone, press to confirm.2. From the Phone Book, select a contact, and thenpress .3. Next, from the list of phone numbers for thiscontact, select the one that you wish to accessthrough the shortcut key, and then press .4. After you have set the shortcut key, the numbericon for the key will be replaced by an iconrepresenting a phone number shortcut. The upperpart of the screen will display the name of thecontact to whom the phone number accessible bythe shortcut key belongs.
Using Your Phone 61Using Function and Phone Number ShortcutsThere are two ways to use shortcuts:1. From the standby screen, long-press to to access thefunction represented by that key or dial the number it represents.2. From the standby screen, press (GoTo) to enter the Shortcutsmenu. You can then:a. Press to move the selection box to the icon corresponding tothe desired key. Then press to access the assigned functionor dial the assigned phone number.b. Press the corresponding key to to access thefunction represented by that key or dial the number it represents.5. Repeat the above step to add or modify a phonenumber shortcut.Different categories of phonenumbers will be represented bydifferent phone number shortcuticons.
62 Using Your PhoneMessages MenuBesides SMS (Short Messaging Service) and EMS (Enhanced MessagingService), your phone also supports MMS (Multimedia Messagingservice). EMS allows your to insert simple graphics and ring tones inyour message, while MMS enables you to send photos, colored graphics,and music using your phone.From the standby screen, press to enter the Messages menu. Youcan also press when in the standby screen and then enter from themain menu by selecting .Yo u ca n u s e t h i s Me s sag e m enu to read, edit and send SMS, EMS andMMS messages.Additional information about messaging•Memory for storing messages is divided between SIM card memory andthe phone's own memory. In the first level of the Messages menu, exceptfor the SIM Folder option, messages saved in Inbox, Outbox, and Draftsare all stored in the phone's memory.•When a new message is received, or when there are unread messages inthe phone's or SIM card's memory, the icon will appear in the externaldisplay's status bar; the main display will show the icon in its status barto remind you that you have unread messages.•When a message has arrived, it will be saved either to the the phone'smemory or to your SIM card's memory, depending on the preferredmemory you have selected in the menu: Messages → Message Settings→ Short Message Settings → Save New Msg To (See page 80).Messages saved to the phone's memory will be stored in the menu:Messages → Inbox; messages saved to your SIM card's memory will bestored in the menu: Messages → SIM Folder → Inbox.•If the phone's memory is already full, any new messages will remain storedin the SIM card's memory (in the menu Messages → SIM Folder →Inbox) until the SIM card's memory is itself full.
Using Your Phone 63•If there is a flashing icon on the external display, and the main displayshows a red icon , this means that the SIM card's message memory isfull. When the SIM card's memory is full, your phone will not be able toreceive any new messages. If this has occurred, when you go to theMessages menu, the display will show a "SIM Full!" message to remindyou of the current situation.•If the number of messages stored in the phone's memory has reached 500,when you enter the Messages menu, the "Message Full!" screen willappear. If there is less than 1K remaining in the phone's memory, the"Memory Insufficient!" screen will appear. In either of these two situations,any messages received will be saved to the SIM card, and you will nolonger be able to edit any messages.•If there is less than 50K remaining in the phone's memory, you will nolonger be able to edit any MMS messages; if the amount of the phone'sremaining memory is less than that required to save an incoming MMSmessage, the phone will not be able to receive that message.•In the Messages menu, the number (such as "(1)", "(3)") following thename of each message folder represents the number of messages savedin that folder.The items in the Messages menu are as follows:
64 Using Your PhoneCreateShort Message2. When writing a message, press (Option) to perform the followingtasks:•Insert: You can insert the following types of objects:Te x t : This is a list of templates that can be used instead of enteringall the characters individually. You can use the factory defaulttemplates or templates of your own that you previously saved tothe list.8To create your own quick message templates, go the menuMessages → Template →SMS Template. See page 78.1. Used to bring up the message editing screen so youcan write a new message. Use the alphanumeric keysto enter text.8For information on how to use the input methodsprovided by the phone for writing messages, seepage 87, "Input Modes".8If no text has been entered in the editing screen,press to return to the standby screen; if sometext has been entered, pressing will bring upthe prompt "Back to Idle?", to make sure you wishto abort the message being edited. If you press (Yes), you will return to the standby screen; if youpress (No), you can continue writing themessage.
Using Your Phone 65Picture: You can select an EMS icon from the EMS icon library toinsert into your message. Press to select the name of the iconyou wish to insert, and then press (View) to view the icon.Press to insert the icon into your message.Animation: You can select an EMS animation from the EMSanimation library to insert into your message. Press to selectthe name of the animation you wish to insert, and then press(View) to view the animation. Press to insert theanimation into your message.Melody: You can select an EMS ring tone from the EMS ring tonelibrary to insert into your message. When the recipient of themessage reads it, the inserted ring tone will be played by therecipient's phone. Scroll to the name of the ring tone you wish touse, and then press to insert the ring tone into your message.The inserted ring tone will be displayed as musical note withinthe message's text.vCard: You can select a contact's data from your Phone Book toattach to your message. After receiving your message, therecipient can save the attached contact data to their own PhoneBook.vCalendar: You can select a Calendar memo and then attach it toyour message. After receiving your message, the recipient can savethe attached memo to their own Calendar.•Text A lig n m e nt: Used to select the type of text alignment for themessage's content.3. After you have finished editing the message, press . A screen in/You can insert an EMS icon or animation at any position within amessage's content.
66 Using Your Phonewhich you can edit the recipient's number will appear. There are twoways you can enter the recipient's phone number:•Key in the recipient's phone number in the number editing screen.•Before entering any phone number, you can press (Select) andthen select a recipient from the list of contacts in the Phone Book.Follow the steps below:a. Press to scroll to the name of contact, and thenpress (Select) to select that contact.b. The display will show all the phone numbers stored forthe contact you selected. Press (Select) to select thedesired phone number.8If the number is too long, press to display thecomplete number.c. After the number has been selected, you must press to return to the list of contacts in the Phone Book. Acheck mark will appear beside the contact whosenumber you selected as recipient for your message. Youcan use the same steps to select the numbers of othercontacts.d. After you have selected all the numbers you wish to dial,press and the display will show all these numbers.4. After the numbers to be dialed have appeared on the screen, press to use the following options with this message:•Send Message: Sends the message to the numbers selected previously.8When a message is to be sent, a copy of the message will be savedto the Outbox folder. If the save fails, the "Save to Outbox Failed!"screen will appear and the send operation will stop.•Preview: Allows you to view the contents of the message.
Using Your Phone 67•Save to Draft: Saves the message to the Drafts folder, for sending at alater time.•Edit Content: Allows you to edit the contents of the message.MMSYou can edit and send MMS messages using this menu.8Before you start to use MMS, you have to subscribe to both GPRSand MMS services provided by your operator. Then you have toadjust MMS settings in your phone to be able to use MMS.Because MMS uses your operator's MMS server on GPRS network tosend messages to phones, you also need to adjust the followingsettings correctly in order to use MMS:Editing and sending MMS messages1. Access the menu: Messages → Create → MMS to open up the MMSediting screen. You can now edit the first page of your MMS message:2. Edit text: Enter text into the first page's editing screen.3. Insert objects: You can insert various types of objects into an MMSInternet →WAP Service → WAP Settings, and select the MMS serveryou wish to activate to configure its settings.8For information on configuring an MMS server's settings, see page126, "WAP Settings".Messages → Message Settings → MMS Settings → Server Info, andselect the server you want to use for sending and receiving MMSmessages./•An MMS message can be made up of multiple pages.•You can also compose an MMS message using a preset MMStemplate by going to the menu: Messages → Template → MMSTemplate. See page 78 for details.
68 Using Your Phonepage. From the editing screen, press (Option), and then selectInsert. The types of objects you can insert into an MMS page are asfollows:•Animation: Scroll to highlight the file name of the desiredanimation, and then press (View) to display this animation.After entering the viewing mode, you can press to display thenext/previous animation; pressing will display the animationin full screen. Finally, press to insert the selected animationinto the page you are editing.•Picture: After scrolling to highlight the file name of the pictureyou want, you can press (View) display this picture. Afterentering the viewing mode, pressing will display the next/previous picture; pressing will display the picture in fullscreen. Press to insert the selected picture into an MMS page.•Photo: You can select a photo saved in the Album menu to insertinto an MMS page.Scroll to the file name of the desired photo, and thenpress （View）to view this photo. After entering the viewingmode, pressing will display the next /previous photo. Press to insert the photo into the page you are currently editing.•Voi ce Me mo: Select the file name of the voice memo to beattached to an MMS page. When the desired voice memo's nameis highlighted, press (Option) and then select Send to attachthis memo to the page you are editing.
Using Your Phone 69•Melody: You can select a ring tone saved in the phone to insertinto an MMS page. Scroll to highlight the name of file name ofthe desired ring tone, and then press to insert this ring toneto the MMS page.8Each MMS page is only able to accommodate one image andone audio file. If you insert another image or audio file into thesame page, the newly inserted file will replace the existing one.8After an audio file such as a voice memo or ring tone is insertedinto an MMS page, the icon will appear on the top of thatpage.•Text: You can select a text template to insert into the messageinstead of entering all the characters individually. You can use thefactory default templates or templates of your own that youpreviously saved to the template list.8To create and save your own text templates, go to the menu:Message → Template → SMS Template. See page 78.•New Photo: Enables you to shoot a new photo using the phone'scamera and then insert that photo into the currently edited page.4. When you have completed your message's first page, from this page'sscreen press (Option), and then select Insert → Page Before/Page After to add a new page before or after the existing one. You canthen repeat the steps described above to compose that newly addedpage.5. When you are editing an MMS page, you can also press (Option)to the following tasks:•Preview: Plays all of the pages you have created.•Remove Picture: Removes an image or photo from the currentlydisplayed page.
70 Using Your Phone•Remove Sound: Removes a ring tone or voice memo from thecurrently displayed page.•Remove Text: Deletes all of the text from the current page.•Remove Page: Deletes the current page from your MMS message.•Previous Page: Displays the previous page.•Next Page: Displays the next page.•Page Duration: This option allows you to set the length of timeeach page is displayed on the screen when playing your MMSmessage.6. When you have completed all of the pages of your message, press to display the following data fields required to send your MMSmessage.Press to scroll to the field you want, and then press or beginentering data to directly edit the data in the currently selected field.•To: You can send your MMS message to a recepient's phone or e-mail address.There are two ways to enter a recepient's mailing information:a. You can directly enter a recipient's phone number or e-mailaddress into the recipient list.8When there are multiple phone numbers or e-mailaddresses being entered, you can press to open upthe symbols field along the bottom of the screen. Use tomove the selection box to a comma, semicolon or space,and then press to place it in the editing screen toseparate different phone numbers or e-mail addresses.b. You can press (Select) and select a contact's phonenumber or e-mail address directly from your Phone Book.Scroll to highlight the name of the desired contact, and then
Using Your Phone 71press (Select) to display that contact's number(s) and e-mail address(es). Press （Select）to mark the number(s)or e-mail address(es) you want, and then press to returnto the list of contacts, with the selected contact's namemarked as well. You can then repeat the same steps to selectthe other contacts' phone number(s) or e-mail addresses.When you have finished selecting all the numbers or e-mailaddresses, press to return to the recipient list, which willshow all the phone numbers and e-mail addresses you haveselected.When the recipient list displays all of the recipients' numbers or e-mail addresses, press to return to the screen showing the datafields for your MMS message. •Subject: Enter your message's subject here.•Cc: You can send your message as a carbon copy to others.•Bcc: You can send your message as a confidential carbon copy toothers.8You are able to send an MMS message to a maximum of tenrecipients.7. When the screen shows the data fields required to send your MMSmessage, pressing (Option) will bring up the options below:•Preview: Plays all of the pages you have created.•Save to Draft: Saves the message to the Drafts folder, for sendingat a later time.•Receipt: press to choose from the following receipt modes:Both Delivery Read: Asks the recipient to return aconfirmation after receiving and reading your message.
72 Using Your PhoneOnly Delivery: Asks the recipient to return a confirmationafter receiving your message.Only Read: Asks the recipient to return a confirmation afterreading your message.None: Cancels this function.•Priority: Determines this MMS message's priority.After you have completed all of the information and settings required foryour message, pressing will send this MMS message to the designatedrecipients. Its backup copy will be stored in the Outbox folder as well.SIM FolderThe messages in the SIM folder are the messages stored in your SIMcard's memory.InboxIf your SIM card was previously used in another phone, anymessages received on that phone are stored here. When the SIMcard is used in your S670C, and the phone's memory is full, anyfurther messages that you receive will also be stored in the SIMcard's inbox.The procedure for using this option is largely identical with thatdescribed below for using the phone's Inbox. However, afterselecting a message and pressing (Option), the menu displayedincludes four additional options:•Move to Phone: Moves the selected message from your SIM card'smemory to the phone's memory.•Move All to Phone: Moves all messages to the phone's memory.•Copy to Phone: Copies the selected message from your SIMcard's memory to the phone's memory.
Using Your Phone 73•Copy All to Phone: Copies all messages to the phone's memory.8The messages moved to the phone will be erased from the SIMcard's memory, and cannot be moved back.8When there is 1K or less of free space in the phone's memory,the screen will display the message "Memory Insufficient!" andyou will not be able to move or copy messages from the SIM cardto the phone.8Only complete messages can be copied to the phone's memory.OutboxIf your SIM card was previously used in another phone, savedmessages or backups of sent messages will be stored here.Inbox1. When new messages are received, the icon will appear on theexternal display, along with a text indicator of the number ofmessages received. After you open the flip, the main display will showthe number of messages that have been received.2. You can press to read the messages in the inbox. You can alsopress (Back) to return to the standby screen (The icon willappear in the standby screen's status bar, indicating that there areunread messages) and then enter the menu Messages → Inbox toread messages. A list of all new messages will appear on the screen,with each message record showing the sender's phone number. (If thesender is a contact stored in the Phone Book, the display will showthe name of the contact in the Phone Book, rather than the phonenumber.) 3. Press to scroll to the message record you would like to view.Depending on the type of message to read, there are two scenarios:
74 Using Your PhoneReading an SMS/EMS message• Press (Option), which will present the following choices:Create: Allows you to write and send a new message.Delete: Deletes the selected message.Call: You can use the phone number used to send the message tocall the sender.Forward: Allows you to edit the content of this message andforward it to another person.Save to Phone Book: Saves the phone number of the message'ssender to the Phone Book. For information on how to save, seepage 38, "Adding Contacts to the Phone Book".Delete All: Deletes all the messages in the inbox.•Press to read the message's content. Then press (Option) todisplay the following options:Reply: Allows you to write and send a reply message.Delete: Deletes the message being read.Call: Uses the number from which the message was sent to call thesender (listed in the "Sender" item on the display), or dial a phonenumber shown in the contents of the message (the displayednumber option). Scroll to the desired number, and then press to dial the number.Forward: Lets you edit the message's contents, and then forward itto another person.Details: Allows you to view the date and time when the messagewas sent.Save: Allows you to save the following content:•Save the phone number from which the message was sent(the number shown on the display in the "Sender Info" item)to the Phone Book.
Using Your Phone 75•Save the phone number displayed in the message's contents.(the option for a directly displayed number).•If the message is an EMS message with an attached picture orring tone, you can save these objects to your phone's memory(such as by selecting the option for "Picture/Animation"shown on the display). Depending on the type of the object,the phone will save it to the corresponding EMS objectlibrary in the Multimedia menu. For example, if the object isan EMS animation, it will be saved to an available position inthe Multimedia → Animation menu where you can use it incomposing future messages.8If you are saving a picture or animation, you can select theSave as Wallpaper option, setting it as the wallpaper for thestandby screen.8 If you are saving a melody, you can also select the Save asRing Tone option, setting it as the ring tone that will playwhen there is an incoming call.8For details on the Multimedia menu, see page 134.•If the message has a contact's information attached to it, youcan save that contact's information to your Phone Book.•If the message has a Calendar memo attached to it, you cansave that memo to your Calendar.Save All: Saves all the objects attached to the message.Reading an MMS message•Press (Option) to choose from the following options:Create: Allows you to write and send a new message.Delete: Deletes the selected message.Call: You can use the phone number used to send the message tocall the sender.
76 Using Your PhoneForward: Allows you to edit the content of this message andforward it to another person.Save to Phone Book: Saves the phone number of the message'ssender to the Phone Book. For information on how to save, seepage 38, "Adding Contacts to the Phone Book".Delete All: Deletes all the messages in the inbox.•Press to play the message's pages in sequence. While playing, youcan perform the following tasks:a. When playing the message, you can press (Pause) totemporarily stop playing the message. When the message hastemporarily stopped playing, you can either press (Play)to resume playing the message starting with the currentlydisplayed page, or first press to scroll to the page youwant, and then press (Play) to resume playing themessage starting with that page.b. When playing the message, press (Stop) to stop playingthe message.c. When the phone finishes playing the entire message, fromthe message's last page press to replay the last page. Ifyou want to replay the other pages, you must return to thefirst page using , and then press to restart.•When the phone finishes playing the entire message, you can alsopress (Option) which will present the following choices for you tomanage the message:Reply: Allows you to write and send a reply message.Delete: Deletes the message being read.
Using Your Phone 77Call: Uses the number from which the message was sent to call thesender (listed in the "Sender" item on the display), or dial a phonenumber shown in the contents of the message (the displayednumber option). Scroll to the desired number, and then press to dial the number.Forward: Lets you edit the message's contents, and then forward itto another person.Details: Allows you to view the date and time when the messagewas sent.Save: Allows you to save the following content:•Save the phone number from which the message was sent(the number shown on the display in the "Sender Info" item)to the Phone Book.•Save the phone number displayed in the message's contents.(the option for a directly displayed number).•If the message is an MMS message with an attached pictureor ring tone, you can save these objects to your phone'smemory (such as by selecting the option for "Picture/Animation" shown on the display). Depending on the type ofthe object, the phone will save it to the corresponding MMSobject library in the Multimedia menu. For example, if theobject is an MMS animation, it will be saved to an availableposition in the Multimedia → Animation menu where youcan use it in composing future messages.8If you are saving a picture or animation, you can select theSave as Wallpaper option, setting it as the wallpaper for thestandby screen.8 If you are saving a melody, you can also select the Save asRing Tone option, setting it as the ring tone that will playwhen there is an incoming call.8For details on the Multimedia menu, see page 134.
78 Using Your PhoneSave All: Saves all the objects attached to the message.TemplateSMS TemplateYou can use the quick message templates in this menu to compose amessage without having to enter the entire text character bycharacter. You can use the factory default templates, or templatesthat you previously saved to the list. Scroll to the desired templateand then press to enter its text into your message. You can thenedit the text as you wish and then send the message.To create your own quick message templates, press (Option)and then select Add. You can then enter the text for the template,pressing to save it.8If a template is one of the factory defaults, you will not be able touse the editing function to modify it.MMS TemplateYou can select a preset MMS template from this menu to composeyour MMS message. Scroll to highlight the name of the templateyou want and then press to edit that template into your desiredMMS message.OutboxThis option preserves a backup copy of messages that you previouslysent. Scroll to the desired message record, and then you can:•Press (Option) to access the following options:Resend: Allows you to edit and send the message to itsoriginal recipients.
Using Your Phone 79Forward: Allows you to edit and forward the message to otherrecipients.Delete: Deletes the message.Delete All: Deletes all the messages in the Outbox.•Press to read the message. After reading the message, you canpress (Option) to execute the following options:Resend: Allows you to edit and send the message to itsoriginal recipients.Forward: Allows you to edit and forward the message to otherrecipients.Delete: Deletes the message.8The way you manage an MMS message differs from the way youmanage an SMS/EMS message. See related sections of thisuser manual for details.DraftsThis option allows you to preserve message drafts that you have saved.Scroll to the desired message record, and then you can:•Press (Option) to access the following options:Send: Allows you to edit and send the message.Forward: Allows you to edit and forward the message.Delete: Deletes the message.Delete All: Deletes all messages in the Drafts folder.•Press to directly edit the contents of the message.8The way you manage an MMS message differs from the way youmanage an SMS/EMS message. See related sections for details.
80 Using Your PhoneVoi c e m ai lUsed to dial the voicemail number provided by your network vendor tolisten to your voicemails.8Your network vendor will provide you with your voicemail inboxnumber and a number for accessing any other voicemail services.For detailed information about voicemail services, contact yournetwork operator to see if you need to save a specific phone numberto your phone in order to access your voicemail inbox.Message SettingsThis menu item includes a number of options for adjusting messagesettings:Voicemail No.You can save your voicemail phone number here.Short Message SettingSave New Msg toHere you can determine whether a new message will be savedto the phone's memory or to your SIM card's memory.Service Center No.This feature allows you to save the message center's phonenumber for sending your messages. The messages that yousend are sent to recipients through this message center.Enter the message number provided by the network vendor.After you are finished, press to confirm.
Using Your Phone 81Bearer ModeThis can be set according to whether you are using a GPRSnetwork system or a regular GSM dialup network. If you areusing a GPRS network, you can use both the GPRS and dialupnetwork to send and receive SMS messages. If however you areusing a dialup network, you are restricted to using only thedialup network for sending and receiving SMS messages.•GPRS: Use only the GPRS network to send and receive SMSmessages.•CSD: Use only the dialup network to send and receive SMSmessages.•GPRS Preferred: Use the GPRS network preferentially. Only ifthere is no GPRS network present will the dialup network beused.•CSD Preferred: Use the dialup network preferentially. Only ifthere is no GPRS network will the GPRS network be used.Val idi ty Peri o dThis sets the duration that an undeliverable SMS message thatyou send can be stored at the message center. During thisperiod, the message center will continue to attempt to deliverthe message to the designated number.Message TypeYou can request that your network operator convert your textmessages to different types.Status ReportAfter activating this function, the network vendor will reportto you when a message has been delivered.
82 Using Your PhoneDirect ReplyYou can request that your reply to an SMS be sent directlythrough the sender's message center.MMS SettingsFilterYour phone will reject all MMS messages from the senderslisted here.ExpirySets the length of time your outgoing MMS message stays onthe server before it reaches the recipient successfully.Reply TypeYou can determine here whether you want to use an SMSmessage or MMS message in reply to an MMS message youhave received.Size LimitSets the maximum size for a message that the phone receives. Ifan incoming message exceeds this size, the phone will not beable to download that message.Server InfoActivates the MMS server used for sending and receiving MMSmessages.
Using Your Phone 83Deferred DownloadAfter you activate this function, the phone will only downloadthe information associated with the sender when it receives anMMS message. You can then decide whether to download thismessage's content after you have read the information relatedto the sender.Delivery ReportAsks the recipient to return a confirmation after receiving yourMMS message.Read ReportAsks the recipient to return a confirmation after reading yourmessage.
84 Using Your PhoneBroadcastCell broadcast messages are general messages that your networkoperator broadcasts to all phones within a particular area. Thesemessages are broadcast in numbered channels. For example,channel 030 might be for local weather, 060 for traffic reports, 080for information about local hospitals, taxis, pharmacies, and soforth.You can receive cell broadcast messages that your network operatorbroadcasts, and select your preferred topics and languages.8For more information about available channels and a list of theinformation they provide, contact your network operator.8When you receive a cell broadcast, the content will be displayedtwice in ticker-tape fashion.ReceiveAllows you to select whether or not to receive cell broadcastmessages.Top ic sAllows you to decide what information you wish to receivefrom your network operator's cell broadcasts. The topics listedin the To p i c s list represent the broadcast information that youhave selected to receive from your network operator.If you have not previously saved any topics, you can press(Option) and then select the Add option so that you canenter the desired range of topic numbers (that is, the channelnumbers). The upper and lower limits of the range are thehighest and lowest channel numbers, respectively. The largest
Using Your Phone 85possible range is 0 to 65534. You are no longer limited toselecting only single channels, but can specify a range. After thelist has stored the topic range, you can select a specific topicand then press (Option) to add it to the list. You can alsoedit or delete selected topics.LanguageYou can limit the cell broadcast information that you receivefrom your network operator to a specific language.Press (Select) to select your preferred language, and thenpress .Cleanup MessagesAllows you to erase specific messages based on the message categorythat you select in this menu.Memory StatusDisplays the amount of remaining available memory, includingpictures, animations and ring tones stored on the phone.
86 Using Your PhoneVoi ce Mem o1. When the phone is in the standby mode, long-press .3. After you are finished recording, press (Save)to save the voice memo. Enter the name of therecording and then press .4. After you save the voice memo, the display willshow the name of the voice memo. You can now:a. Press (Option), and then select whetheryou wish to record a new voice memo, renamethe current voice memo, or delete the currentvoice memo.2. Press (Option) to bring up a pop-up menu.Select Add and then press . The voice memoscreen will appear. Use to navigate to thebutton icons on the screen and access Voice Memofunctions:a. Press to record.b. Press to stop recording.c. Press to play the voice memo.
Using Your Phone 87Input ModesChanging the Text Input ModeThe input mode icons (names) that may appear in the upper rightcorner of the screen represent the following input modes:b. Press to play the voice memo. In thevoice memo screen, you can press toplay the previous or next memo.Uppercase letters input mode.Lowercase letters input mode. iTap (predictive input mode) for uppercase letters. iTap (predictive input mode) for lowercase letters.Numeric input mode (123)./You can set the default input mode to the one you most frequentlyuse. Go the menu Settings → Input Mode. See page 163.When the display shows the editing screen, youwill be able to see the name of the current textinput mode in the upper right corner of thescreen. Press to change the input mode.The text input mode currently in use
88 Using Your PhoneLetter Input Mode (ABC)In this mode, press the key containing the desired letter repeatedly toscroll through the available characters in order until it is reached.How to use the letter input mode•You must press the key corresponding to the desired letter the correctnumber of times in order to enter the letter you want. Display lettersfor entry according to the order shown on each key. Pressing a keyonce will display the first letter listed on the key, while pressing it twicewill display the second letter, and so on.•When you have entered a letter and wish to enter the next letter, eitherwait for two seconds until the cursor moves to the next text entryposition, or immediately press the key for the next letter.•Press to enter a space before beginning a new word.•While entering text, press to move the cursor left or right; press to move the cursor up or down. Press once to delete acharacter; long-press to delete all entered content.Numeric Input Mode (123)The numeric input mode allows you to use the alphanumeric keys to to enter numbers.Predictive Input Mode (iTap)iTap analyzes letters as they being inputted, making intelligentpredictions about the words you are attempting to enter, and speedingup text entry.
Using Your Phone 89How to use iTap•Press once the alphanumeric key corresponding to the first letter ofthe word you wish to enter without considering where that letter fallsin the sequence of characters available through that key. Then pressthe key corresponding to the second letter, and so forth. The phonewill predict which word you wish to enter based on the set of keys youhave pressed. The predicted word will be shown in the lower leftportion of the screen. This word may change as you continue to pressother keys; therefore, before you have entered a complete word, youdo not need to worry if the displayed word does not yet match theword you intend to enter.•After pressing keys for a complete word, if the displayed word doesnot match the one you intended to enter, press to view othercandidate words and locate the desired word.•Once the correct word is displayed on the screen, press to enter thisword. A space will automatically be inserted after the word.•While entering text, press to move the cursor left or right; press to move the cursor up or down. Press once to delete acharacter; long-press to delete all entered text.Example of iTap in useTo enter "COME HOME" in the message editing screen using iTap, usethe following steps:1. Press to switch to iTap for uppercase letters (ITAP). 2. Press to select C, O, M, E.3. Press to enter "COME" as text. A space will automatically be
90 Using Your Phoneinserted after "COME".4. Press to enter "HOME".5. Since "GOOD" is not the word that you wish to enter, press todisplay the next candidate word, "HOME".6. Press to place "HOME" into the message.Symbol Input ModeWhen editing messages, press to open the symbols field along thebottom of the screen. Use to move the selection box to the symbolyou wish to enter, and then press to place it in the message text.
Using Your Phone 91Direct Connection to URLsYour phone provides handy preset URL text hotkeys, enabling you toenter a complete URL more quickly and conveniently, and makingInternet access more efficient and enjoyable.From the standby screen, you can rapidly key in numerical URLs. If, forexample, you wish to enter "http://123.com" you need only key in "123"and then press . The full URL will appear on the screen. automatically adds the necessary "http://" prefix and the ".com" domainsuffix. To actually connect to this website, simply press to confirmand the phone's browser will be started up so that you can get online.When entering a URL, you can also use to access the followingfunctions:•After pressing once, further presses of will switch to the URLsuffixes shown in the chart:•You can convert (*) into the (.) that appears in URL addresses.For example, if you enter 123*456 in the standby screen, and thenpress , the URL "http://123.456.com" will appear on the screen.Number of times Output result0 . com1.com.tw2.net3 .net.tw4.com.cn5 .net.cn
92 Using Your Phone•After you press to enter "http://" press to enter "/" and "-".For example, if after you enter "123" and then press once-causing"http://123.com" to appear on the screen-you press again, theURL will change to "http://123.com/". Pressing again willswitch between "/" and "-".•When the screen shows the desired URL, press to connect to theInternet and access this URL address.
Menus 93MenusThe phone's menus provide various features. The main menu consistsof 9 icons. Each icon represents a particular menu item, which is used toaccess related sub-menus.For information about navigating menus, see page 23, "MenuNavigation".Phone BookThis menu provides various functions for managing the Phone Book,including the ability to add, locate, and copy contact data; add contactsto a caller group; and so forth.FindUsed to locate a contact in the Phone Book. You can enter the full nameof the desired contact, or if you are not sure about the spelling of thecontact's name, simply enter the first letter, and then press . Thephone will locate all contacts whose names begin with this letter, andyou can scroll to the field containing the contact you want. For detailson what to do after locating the desired contact, see page 42, "FindingContacts in the Phone Book".AddUsed to add a new contact to the Phone Book. You can follow theprocedure described on page 38, "Adding Contacts to the Phone Book".EditAfter selecting a particular contact, you can follow the proceduredescribed on page 38 for editing the data for this contact.
94 MenusCopyIf you are using the phone book stored in the phone's memory, you cancopy contact data to the SIM card's phone book, and vice versa. You canselect a contact to copy from one phone book to the other, and copy allcontacts in one phone book to the other by choosing the option CopyAll Phone Book to SIM (Copy All SIM Phone Book to Phone).DeleteDeletes a contact from the Phone Book. You can delete one contact at atime, or delete all contacts at once. If you select the option to delete allcontacts, you will be asked for your phone password (the defaultpassword is "1234").Caller GroupsCaller groups are combinations of phone settings used to identify aparticular group of contacts, such as work colleagues, family members,or friends. For example, you can associate a ring tone and animationwith one group, and when a member of that group calls, the phone willuse the group's ring tone and display its animation.The phone provides 5 caller groups: Colleagues, Family, Friends, VIP,Others.After you scroll the caller group that you wish to configure, you canperform the following tasks:•Press (Option): Used to select the ring tone or animation/image that will help you identify the caller group to which aparticular caller belongs, or to rename the caller group.•Press : Allows you to view a list of all contacts that belong tothe caller group. Press to highlight the desired contact, andthen press (Option) to access the following options:
Menus 95Add: Add a contact to the caller group. Press to select acontact to add, and when finished press .Delete: Deletes the selected contact from the contact group.
96 MenusPrivacy ManagerThis option allows you to set your phone to reject certain calls, oralternatively, specify which calls to accept, rejecting all others.1. First, create a list of calls that you wish to accept (Accept List) or a listof calls that you wish to reject (Reject List), by scrolling to thecorresponding item. Then press (Edit) and the names of thecontacts who are already on the selected list will be displayed. If thelist is empty, press (Option) and then select Add to choosecontacts to include in the list.3. When you are finished, press . The screen will display the namesof the contacts you have added to the list. If needed, you can press (Option) to add or remove contacts. When you have confirmed thelist, press (Back) to return to the Privacy Manager menu.2. You can select all the members of a caller group tobe added to a list, or you can select contacts fromthe Phone Book individually (the screen will firstdisplay the caller group option). Press to scrollto the caller group or contacts that you wish to addto the list, and then press (Select) to make yourselections; press (Cancel) to clear the callergroup or contacts that you have selected.4. Lastly, select whether to activate the Accept List orthe Reject List. Press to scroll to the list thatyou wish to activate, and then press toconfirm your choice.
Menus 97If you choose to activate the Accept List, from now on yourphone will only be able to receive calls from contacts in theAccept List. If, on the other hand, you choose to activate theReject List, your phone will not be able to receive calls fromcontacts in the Reject List.8The same contact cannot be included in both the Accept List andthe Reject List.8If you are currently using the phone book on your SIM card, youwill not have access to the Privacy Manager feature.Business CardYou can use this option to enter your own business card information.The data fields are as follows:Press to scroll to the data field you wish to edit, and thenpress (Edit), press , or begin entering text to edit the data inthis field. After you are finished entering the data you wish to, press to save all the business card data.Your name.Your mobile phone number.Your e-mail address.Your company's address.Your job title.
98 MenusActivateMy NumberThis option allows you to save your SIM card number and name to yourSIM card's memory.Press (Option) and select Add. Now select whether you want toenter your name or number and then press (Edit) or to beginentering the information. When you are finished, pres , and thescreen will display the name you have stored in your SIM card'smemory. You can press (Option) to add more data, edit thecurrently selected data, or delete the currently selected data.SIM StatusUsed to view how many additional entries can be stored in the SIMcard's phone book and the maximum number of entries that it canstore.Used to activate the phone book stored in the phone'smemory or on your SIM card. Press to highlightthe desired phone book and then press .
Menus 99Call Records8Your network operator must support this feature in order for you to beable to use it.This menu includes a list of your missed calls, dialed calls, and receivedcalls. Call costs and time are also recorded.Missed CallsShows your most recent missed calls.Press to scroll to the missed call that you wish to select. You cannow choose to view, edit, or delete the number for the missed call. Theprocedure is the same as that described on page 46, "Last Missed,Dialed, and Received Calls".Received CallsShows your most recent received calls.The procedure for using this feature is the same as that described onpage 46, "Last Missed, Dialed, and Received Calls".Dialed CallsShows your most recent dialed calls.The procedure for using this feature is the same as that described onpage 46, "Last Missed, Dialed, and Received Calls".Delete AllDeletes all call records.
100 MenusCall Duration8This feature is only accessible if supported by your network operator.Last Call TimeShows the duration of the last call.All Calls TimeShows the total time for all calls.Received Calls TimeShows the total time for all received calls.Dialed Calls TimeShows the total time for all dialed calls.ClearClears all call time records.8You must enter your PIN2 code in order to zero call times./What is a PIN2 code?•The PIN2 is the second PIN code. Its main use is in controllingrestricted services-for example, call time limits and restricted phonenumbers.•If the PIN2 code is incorrectly entered three times consecutively, thePIN2 code will be locked. To unlock the PIN2 code, you will need toenter the PUK2 code, which you obtain from your network operator.
Menus 101Call CostLast Call CostShows the cost of your last call.8Requires the support of the network operator.All Calls CostShows the total cost of all calls.8Requires the support of the network operator.ClearClears all call cost records.8Requires entry of the PIN2 code.Call Cost LimitShows the current limit set for total call costs.Set Cost LimitAllows you to set a limit for total call costs. If call costs exceed thislimit, the phone will no longer be able to dial pay calls. When thisfeature is activated, the remaining cost will be displayed in theinformation box on the screen each time you end a call.8Requires entry of the PIN2 code.Set UnitsAllows you to first enter the unit price and a currency forcalculating call costs.8Requires entry of the PIN2 code.
102 MenusMessagesFor a description of the features available in the messages menu, seepage 62, "Messages Menu".
Menus 103OrganizerCalendarYou can use the Calendar to set up memos for forthcoming events suchas a meeting, an appointment, or a friend's birthday. The Calendar willalso remind you about events you have previously scheduled.3. In the memo editor screen, scroll to the data field you wish to edit,and then press (Edit) or , or press alphanumeric keys to1. When you open the Calendar, the phone willshow the calendar for the current date.8If you have not set the current date on yourphone, go the menu Settings → Date & Time.See page 145.In the Calendar screen, press to movethe red box to the date where you wishcreate a memo. You can also press(Option) and select the Go to Dateoption, then enter the desired date, pressing to confirm your selection of that date.When the Calendar isopened, the current date will be highlighted by a red box.2. When the red box is highlighting the desired date,press (Option) and select the Add option toopen the memo editor.
104 Menusbegin entering data. You can enter data in these fields:4. After completing entry of data in each of the fields, you must press to save the memo to that date. The phone will display this date'smemo list, including the event name and time for the memo you justsaved. If the Alarm Clock has been set to remind you about the eventassociated with the memo, the icon will appear beside the eventChange the memo's assigned date. In the Calendar screen, press to scroll to the date where you wish to create the memo, andthen press .Enter a time for the event associated with the memo by using theappropriate number keys.Enter a name for the event associated with the memo.Enter the scheduled location for the event associated with thememo.Enter the names of the participants in the event associated with thememo.Record any notes about the event associated with the memo.Scroll to this option to set up your phone toremind you about an event. On the appointeddate, when the scheduled time arrives, the memowill appear on the screen and the Alarm Clockwill ring.First press to activate this feature. The timefield will appear beneath, and you can enter the time when you wishto be reminded about the event.

Navigation menu