Benq 56E21 GSM900/DCS1800 / PCS1900 GSM/GPRS Mobile Phone User Manual M350 EN

Benq Corporation GSM900/DCS1800 / PCS1900 GSM/GPRS Mobile Phone M350 EN

Manual

BenQ M350Mobile Phone User’s Manual
Copyright© 2005. BenQ Corporation. All rights reserved. No part of thispublication may be reproduced, transmitted, transcribed, stored in aretrieval system or translated into any language or computer language, inany form or by any means, electronic, mechanical, magnetic, optical,chemical, manual or otherwise, without the prior written permission ofBenQ Corporation.* This publication includes images from CorelDRAW® 9 which areprotected by the copyright laws of the U.S., Canada and elsewhere. Usedunder license.DisclaimerBenQ Corporation makes no representations or warranties, eitherexpressed or implied, with respect to the contents hereof and specificallydisclaims any warranties, merchantability or fitness for any particularpurpose. Further, BenQ Corporation reserves the right to revise thispublication and to make changes from time to time in the contents hereofwithout obligation of BenQ Corporation to notify any person of suchrevision or changes.
Safety Information iSafety InformationFor your safety, please read the guidelines below carefullybefore you use your phone:Exposure to Radio Frequency SignalsFor your safety, please do not wear the phone in front of your chest.SAR compliance for body-worn operations is restricted to belt-clips,holsters or similar accessories that have no metallic component in theassembly and must provide at least 1.5 cm separation between the device,including its antenna, and the user's body.Your wireless handheld portable telephone is a low power transmitter andreceiver. When it is ON, it receives and also sends out radio frequency(RF) signals.European and international agencies have set standards andrecommendations for the protection of public exposure to RFelectromagnetic energy.•International Commission on Non-Ionizing Radiation Protection(ICNIRP) 1996•Verband Deutscher Elektringenieure (VDE) DIN- 0848•Directives of the European Community, Directorate General V inMatters of Radio Frequency Electromagnetic Energy•National Radiological Protection Board of the United Kingdom, GS 11,1988•American National Standards Institute (ANSI) IEEE. C95.1- 1992•National Council on Radiation Protection and Measurements (NCRP).Report 86•Department of Health and Welfare Canada. Safety Code 6Max. SAR measurementEU: GSM900: 0.826 mW/g; DCS1800: 0.33 mW/g.USA: PCS1900: Head: 0.881 mW/g; Body: 0.294 mW/g
ii Safety InformationThese standards are based on extensive scientific review. For example,over 120 scientists, engineers and physicians from universities,government health agencies and industry reviewed the available body ofresearch to develop the updated ANSI Standard.The design of your phone complies with these standards when usednormally.Specific Operating RestrictionsNo metallic component allowed in body-worn accessories.Antenna CareUse only the supplied or approved replacement antenna. Unauthorizedantennas, modifications or attachments may damage the phone andviolate FCC regulations. Phone OperationNormal Position: Hold the phone as you would any other telephone withthe antenna pointed up and over your shoulder.For your phone to operate most efficiently, do not touch the antennaunnecessarily when the phone is in use. Contact with the antenna affectscall quality and may cause the phone to operate at higher power level thanotherwise needed.Batteries•For safety concerns, when the temperature of the phone goes over 45°C(113F) or below 0°C(32F), charging will halt. •Do not expose batteries to temperatures below -10°C(14F) or above 45°C(113F). Always take your phone with you when you leave yourvehicle.
Safety Information iiiAll batteries can cause property damage, injury or burns if a conductivematerial such as jewelry, keys or beaded chains touches exposed terminals.The material may complete electrical circuit and become quite hot. Toprotect against such unwanted current drain, exercise care in handling anycharged battery, particularly when placing it inside your pocket, purse orother container with metal objects. When battery is detached from thephone, your batteries are packed with a protective battery cover; pleaseuse this cover for storing your batteries when not in use.DrivingCheck the laws and regulations on the use of wireless telephones in theareas where you drive. Always obey them. Also, if using your phone whiledriving, please:•Give full attention to driving--driving safety is your first responsibility.•Use hands-free operation, if available.•Pull off the road and park before making or answering a call if drivingconditions so require.Electronic DevicesMost modern electronic equipment is shielded from RF signals. However,certain electronic equipment may not be shielded against the RF signalsfrom your wireless phone.PacemakersThe Health Industry Manufacturers Association recommends that aminimum separation of six (6") inches be maintained between a handheldwireless phone and a pacemaker to avoid potential interference with thepacemaker. These recommendations are consistent with the independentresearch by and recommendations of Wireless Technology Research.Persons with pacemakers:•Should ALWAYS keep the phone more than six inches from theirpacemaker when the phone is turned ON.•Should not carry the phone in a breast pocket.
iv Safety Information•Should use the ear opposite the pacemaker to minimize the potential forinterference.If you have any reason to suspect that the interference is taking place, turnyour phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In theevent of such interference you may want to consult your hearing aidmanufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer ofyour device to determine if they are adequately shielded from external RFenergy. Your physician may be able to assist you in obtaining thisinformation.Turn your phone OFF in health care facilities when any regulations postedin these areas instruct you to do so. Hospitals or health care facilities maybe using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shieldedelectronic systems in motor vehicles. Check with the manufacturer or itsrepresentative regarding your vehicle. You should also consult themanufacturer of any equipment that has been added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where posted notice so requires.AircraftFCC regulations prohibit using your phone while in the air. Switch OFFyour phone before boarding an aircraft.
Safety Information vBlasting AreasTo avoid interfering with blasting operations, turn your phone OFF whenin a “blasting area” or in area posted “TURN OFF TWO-WAY RADIO.”Obey all signs and instructions.Potentially Explosive AtmospheresTurn your phone OFF and do not remove the battery when in any areawith a potentially explosive atmosphere and obey all signs andinstructions. Sparks, from your battery, in such areas could cause anexplosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not alwaysclearly marked. They include fueling areas such as gasoline stations; belowdeck on boats; fuel or chemical transfer or storage facilities; vehicles usingliquefied petroleum gas (such as propane or butane); areas where the aircontains chemicals or particles, such as grain, dust, or metal powders; andany other area where you would normally be advised to turn off yourvehicle engine.For Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT place objects, including bothinstalled or portable wireless equipment, in the area over the air bag or inthe air bag deployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, serious injury could result.Federal Communications CommissionThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:1. this device may not cause harmful interference, and2. this device must accept any interference received, includinginterference that may cause undesired operation.
vi Safety InformationThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiated radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference willnot occur in a particular installation If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.European Union Directives Conformance StatementThis device complies with the OJ-Directive as below:3GPP TS 51.010-1EN 301 511EN50360/ EN50361ETSI EN 301 489-1/-7EN 60950Electromagnetic Compatibility Directive (89/336/EEC), Low VoltageDirective (73/23/EEC)And R&TTE Directive (99/05/EEC).And also complies with the standard:
viiTable of ContentsTable of ContentsSafety Information ...........................................................i1. Preparing Your Phone For Use................................... 1Inserting Your SIM Card ..................................................... 1Installing the Battery ............................................................ 2Installing the Back Cover ..................................................... 2Charging the Phone.............................................................. 3Turning the Phone On ......................................................... 42. Getting to Know Your Phone .....................................6Your Phone at a Glance........................................................ 6External Display.................................................................... 7Standby Screen ..................................................................... 8Icons on the Main Display and the External Display .............9Using the Keys in the Standby Mode ....................................11Menu Navigation................................................................ 143. Using Your Phone ..................................................... 15Making a Phone Call .......................................................... 15Ending a Phone Call........................................................... 15Answering a Phone Call ..................................................... 16Rejecting an Incoming Call................................................ 16Making an International Call............................................. 16Making an Emergency Call ................................................ 17Dialing an Extension Number ........................................... 17Speed Dialing ...................................................................... 17
viii Table of ContentsListening to Voicemails...................................................... 18Phone Book......................................................................... 19Adding Contacts to the Phone Book.....................................19Finding Contacts in the Phone Book ....................................22Last Missed, Dialed, and Received Calls............................ 24Operations During a Call................................................... 25In-Call Menu ...................................................................... 26Using the Silent Profile....................................................... 29Camera ................................................................................ 30Shortcuts ............................................................................. 35Setting Shortcuts ....................................................................35Using Shortcuts ......................................................................36Messages.............................................................................. 37SMS .........................................................................................37MMS........................................................................................44SMS Chat ................................................................................49Voicemail ................................................................................51Cell Broadcast.........................................................................52Memory Status .......................................................................53Input Modes ....................................................................... 54Predictive Input Mode (iTap) ...............................................55Letter Input Mode (ABC) ......................................................56Numeric Input Mode (123)...................................................56Symbol Input Mode ...............................................................56Direct Connection to URLs ............................................... 574. Menus.........................................................................58
ixTable of ContentsPhone Book......................................................................... 58Find .........................................................................................58Add..........................................................................................58Edit ..........................................................................................59Copy ........................................................................................59Delete ......................................................................................59Caller Group ...........................................................................59Business Card .........................................................................60My Number ............................................................................60Memory Status .......................................................................60Messages.............................................................................. 61Calls ..................................................................................... 61Missed .....................................................................................61Received ..................................................................................61Dialed ......................................................................................61Cleanup All .............................................................................62Duration..................................................................................62Cost .........................................................................................63Games.................................................................................. 64Games......................................................................................64Camera ................................................................................ 65Media Center ...................................................................... 65Album .....................................................................................65Image.......................................................................................66Melody ....................................................................................66Cleanup All .............................................................................67Memory Status .......................................................................67
xTable of ContentsTools.................................................................................... 68Alarm ......................................................................................68Auto Time Zone .....................................................................69Calendar..................................................................................69Shortcuts .................................................................................71Calculator................................................................................71Currency Converter ...............................................................71Stopwatch ...............................................................................72Oper. Service....................................................................... 73WAP Service ...........................................................................73STK..........................................................................................77Settings ................................................................................ 78Date & Time ...........................................................................78Auto Power On/Off................................................................78Profiles ....................................................................................79Display ....................................................................................82Audio.......................................................................................84Call Settings ............................................................................84Network ..................................................................................89Security ...................................................................................91Power Saving Mode................................................................92Language .................................................................................92Input........................................................................................92Restore ....................................................................................935. Care and Maintenance ..............................................946. Troubleshooting........................................................ 95
Preparing Your Phone For Use 1Preparing Your Phone For UseInserting Your SIM CardSlide the entire SIM card into the slot in the direction of arrow shownon the compartment, with the metal contacts of the SIM card facingdown and the cut corner at the top right. A SIM card can be easily damaged if its metal contacts becomescratched. Therefore, take special care when holding or inserting it.SIM card If you wish to remove the SIM card, youmust first press down the stay, then pushthe SIM card out of the slot.Stay SIM card
2Preparing Your Phone For UseInstalling the Battery 1. Place the battery onto the back of the phone, with the battery'scontacts facing downwards and the tab on its top edge in alignmentwith the holes in the battery compartment.2. Push the battery against the top of the compartment and press itdown to click it into the compartment.Installing the Back CoverPlace the back cover onto the back of your phone and slide forwarduntil the latch catches the cover.Do not remove the battery when the phone is on. Doing so couldcause you to lose personal settings or data stored either on your SIMcard or in the phone's memory.
Preparing Your Phone For Use 3Charging the Phone1. Insert the charger connector into the charger socket at the bottomright of your phone. Make sure that the connector is inserted in theright direction.2. Plug the charger into a power outlet.3. Once the phone is fully charged, remove the charger from both thepower outlet and the phone.•It takes approximately 4 hours to fully charge a battery.•When charging while the phone is turned off, an animated batteryicon will be shown on the display. When charging while the phoneis turned on, the icon will be shown on the display. The linesshowing the battery power level will scroll until the battery is fullycharged.•When the battery is weak, the phone will play an alert sound.Do not remove the battery while the phone is charging.Charger connector Charger socket
4Preparing Your Phone For UseTurning the Phone On1. Long press to turn the phone on. The phone will display thewelcome animation.2. Enter your PIN code. If you enter the PIN code incorrectly, press(Clear) to delete the incorrect numerals. Press and holdto delete all numerals that have been entered. After completingentry of your PIN code, press to confirm.The PIN (Personal Identification Number) is a password provided bya network operator with a SIM card. You need this password in orderto use the SIM card.3. When the PIN code entered has been accepted, the phone willautomatically search for the designated network. This search processmay take a few seconds.•You can select and set a welcome animation, image, or messagethat will display when you turn on your phone, as well as the musicthat will be played. Go to Settings > Display > WelcomeMessage. For details, please refer to page 82.•If the welcoming music goes on too long, once the standby screencomes up, you can press to stop playback.If you enter the PIN incorrectly 3 times in a row, the SIM card will lockdown and no longer be usable. If this happens, you must enter thePUK (Personal Unblocking Key) for that SIM card in order to unlockit. Please contact your network operator to obtain a PUK.To cancel PIN password authentication, go to Settings > Security >PIN Code > PIN Code. Please see page 91.
Preparing Your Phone For Use 54. The standby screen will be displayed, as well as network signalstrength and the name of the network operator. You can now use thephone.If the phone cannot detect the network, the on-screen signal strengthmeter will show no bars.If the phone links to a network that you are not authorized to use, thesignal strength meter will show a level of zero. You will only be able tomake emergency calls.
6Getting to Know Your PhoneGetting to Know Your PhoneYour Phone at a GlanceFrontEarpieceMain display MicrophoneRight soft keyScroll keyOK keyDial/Answer keyAlphanumeric keysPower on/off keyLeft soft key
Getting to Know Your Phone 7Front and bottomExternal DisplayWhen the flip is closed, the external display's status bar will show iconsfor network strength, battery power, alarm(if set active), the currenttime and the current profile in use. The external display will also alertyou to incoming calls, new messages and missed calls.Hands-free headset/Data cable jackCharger socketBuzzerExternal DisplayCamera lens
8Getting to Know Your PhoneStandby Screen Automatic Sleep Mode: Your phone has an advanced color displaywhich after 30 seconds of inactivity the phone goes to "Sleep Mode".This means that it looks almost black. The phone has not switched offbut is in "Sleep Mode". By tilting the phone you can see the clockdisplayed. By pressing any key the phone display starts up again.This is normal and designed to maintain battery life. When the keypadis locked the time for the screen to go black is reduced to 5 secondsto maintain battery life.•To set the current time and date, as well as the format to be shown,go to Settings > Date & Time. See page 78.•To set the wallpaper of the display, go to Settings > Display >Wallpaper. Alternatively, you can go to Media Center > Images orMedia Center > Album. See page 82 and page 65.•You can go to Settings > Display > Personal Banner to set thetext shown on the display. For details, see page 83.•For enhanced security, you can activate the screen lock by going toSecurity > Screen Lock. For details, see page 92.Time and dateStatus barName of network operatorWallpaperPress to enterthe Phone Book.Press to activate camera mode.Press to enter the main menu.Soft key bar
Getting to Know Your Phone 9Icons on the Main Display and the External DisplayIcon Function DescriptionSignal strength Signal strength of the network. The morebars indicated, the stronger the signal.Battery statusShows the current level of battery power.The more bars indicated, the more powerthat remains. Four bars: fully charged. Nobars: immediate charging needed. Whencharging the phone, the icon will scrollthrough the bars until the battery is fullycharged.GPRS network GPRS services have been activated on yourSIM card.MessageShows that an SMS/MMS message is beingreceived or that there are unread messages.If the icon appears in red, this indicatesthat the message memory is full. Forinformation about the message function, seepage 37, "Messages".WAP messageYou've got a WAP message (this icon willonly appear when there are no incoming orunread SMS/MMS messages).VoicemailIndicates that you have voicemail messages(this icon will only appear if the function issupported by your network operator).Alarm The alarm is turned on. To set the alarm, goto Tools > Alarm. See page 68.Line in useShows the number of the line currently inuse. To set the line, go to Settings > CallSettings > Active Line. For details, seepage 88.
10 Getting to Know Your PhoneSilent In the standby screen, press and hold to activate the silent profile. See page 29,"Using the Silent Profile".NormalShows that the Normal profile is in use. Toset the operating mode, go to Settings >Profiles. See page 79.Meeting Shows that the Meeting profile is in use.Outdoors Shows that the Outdoors profile is in use.Personal Shows that the Personal profile is in use.Handsfree Shows that the Handsfree profile is in use.DivertShows that the call divert function is active.To make settings for this function, go toSettings > Call Settings > Call Divert. Seepage 85. If the phone supports two phonenumbers, then or may appear.Roaming Roaming has been activated (not yourregular network)Icon Function Description
Getting to Know Your Phone 11Using the Keys in the Standby ModeIn this user manual, "long-press" means to press and hold down a keyfor about two seconds before release. "Press" means to press a keyand release immediately.The chart below is meant only to introduce the commands accessiblewith keys when the phone is in standby mode. For information onother key commands available in other operating modes, see thepertinent sections in this user manual.Function keysWhen any key is pressed, the phone will provide aural feedbackthrough keypad tones. To activate or cancel this aural feedback,enter the menu Settings > Profiles. Scroll to the profile currently inuse and press (Edit). Then select Keypad Tone. You can alsogo to Settings > Audio > Keypad Tone to turn the aural feedback onor off. See page 81 and page 84.Key Commands and functionsPower on/off key•Long-press to turn the phone on or off.•Press this key to reject incoming calls or cancel a callbeing dialed.Send/Answer key•Press to send or answer a call.•Press to access the list of last missed/dialed/receivedcalls.OK key•Press to open up the main menu and show its first item.
12 Getting to Know Your PhoneLeft soft key•Press to access the Phone Book (when Names isshown).•Press to save the phone number keyed in from thestandby screen to the Phone Book (when Save isshown).Right soft key• Press this key to use the camera function (whenCamera is shown). •Press this key to delete entered digits one by one; long-press to delete all digits entered (when Clear is shown).•Long-press to turn the silent profile on or off.Scroll key•Press to enter the Quick Access menu. Forinformation about the Quick Access, see page 35.•Press to retrieve photos stored in the Album menu.•Press to enter the Messages menu. For adescription of the Messages, see page 37.•Press to select the profile to activate.Asterisk key•Press this key to enter an asterisk " * ".•To make an international call, long-press this key untilthe display shows "+" ,Then enter the recipient's countrycode, area code and phone number.Voicemail Shortcut•Long-press to dial your voicemail number.Key Commands and functions
Getting to Know Your Phone 13Alphanumeric keysLong-pressing an alphanumeric key will access the function itrepresents, or dial the number that has been assigned to it (shortcutfunction).# key•Press to enter "#".•For extensions: After entering a phone number, long-press to enter a "P" and then enter the extensionnumber.•Long press this key to lock the keypad.~Alphanumeric keys•Press to enter digits in a phone number.•Shortcut key: Long-press a key to immediately accessthe function, or dial the number, that it represents. Seepage 35, "Shortcuts".Key Digit Key Digit/Symbol/Function172839405 * + (long-press)6# P(long-press after entering a phone number)Key Commands and functions
14 Getting to Know Your PhoneMenu NavigationWhen the phone is in standby mode, press to bring up the mainmenu.For details on how to use the various functions listed in the menu, seepage 58, "Menus".Main menuSub-menuYou can also access a menu item by pressing the corresponding menunumber. In the above example, press 3 to access profiles menu.Press to return to the idle screen.Each icon representsa menu item. Usescroll key to movethrough the menu.The name of themenu item youhighlight.Press to enter the option shown here in the display.Scroll up or down to highlight an item. Press to access a highlited item, confirm a selection, or enter the next step.The highlighted row is the currently selected item.The name of thecurrent menu.
Using Your Phone 15Using Your PhoneMaking a Phone CallTo make a phone call, check your phone is powered on showing the idlescreen. Enter the desired number using the alphanumeric keys to. Press to dial your call.To modify a phone number that you have entered, press (Clear) todelete individual digits. Long-press (Clear) or press to deleteall digits entered and return to the standby screen.Ending a Phone CallPress to end a call. The display will show the total call time, andthen return to the standby screen.If you also have a call waiting or on hold, after you press , thedisplay will show a menu to allow you to choose the call you wish toend.During a call, you can use the options. See page 26, "In-Call Menu".To cancel a call that is being dialed, press .
16 Using Your PhoneAnswering a Phone CallWhen a call is received, your phone rings or vibrates, with the displayshowing the caller's number (if supported by your network vendor). Ifthe caller is a contact stored in the Phone Book, the phone will show thename recorded in the Phone Book.If you wish to change the answering mode so that you can press anykey to answer a call, go to Settings > Profiles. After selecting thecurrently active profile, press (Edit) and go to Answer Mode >Any Key.Rejecting an Incoming CallPress to reject the incoming call.Making an International Call1. Enter the outgoing international call code, or long-press until"+" appears on the display.2. Enter the recipient's country code, area code and phone number.Dial the call by pressing .•If the caller is a member of a caller group, the ring tone assigned tothis group will sound. The display will show the image ID that isassociated with this group as well, to help you identify the caller.•For information on how to set up caller groups in the Phone Book,see page 19, "Adding Contacts to the Phone Book".
Using Your Phone 17Making an Emergency CallTo call emergency services, enter 112 (the international emergencynumber) and then press to dial the call. You can make anemergency call even if your phone is locked or cannot access yournetwork, or there is no SIM card inserted, so long as you are withinrange of a network of the type supported by your phone.Dialing an Extension NumberAfter you enter a telephone number, long-press , The phone displaywill show "P". At this point, you can enter the desired extensionnumber, and then press to dial it.Speed DialingYou must assign a number key as the shortcut for a particular phonenumber in order to use speed dialing for that phone number. Forinformation on how to set up a shortcut, see page 35, "Shortcuts".After you have assigned a number key to serve as the shortcut key for aparticular phone number, you can long-press this key when the phoneis in the standby mode to dial the corresponding phone number. Forexample, if you have selected as the shortcut key for a certainphone number, long-pressing will dial this number.
18 Using Your PhoneListening to VoicemailsWhen your voicemail inbox contains new messages, your networkvendor will send you a text message to inform you of a new voicemailmessage (if the network vendor supports it, the voicemail icon willbe shown). There are two ways to access and listen to voicemail:1. When the phone is in standby mode, long press to directly dialthe voicemail phone number and listen to your voicemail messages.2. Go to Messages > Vo i cem a il > Get Vo i cem a il to dial the voicemailnumber.If the voicemail number is not stored in the memory, you will not beable to access your voicemail by long-pressing . In this case,you will need to manually set the number by going to Messages >Voicemail > Set Number.
Using Your Phone 19Phone BookAdding Contacts to the Phone BookThe Phone Book will have different formats and data headingsdepending on whether you have chosen to use a phone book stored onyour SIM card or in your phone's memory. The phone book in yourphone's memory can store up to 500 contacts. The capacity of a phonebook on your SIM card depends on the particular service provided byyour network vendor.1. In the standby screen, enter the phone number you wish to store, andthen press (Save). The display will show the default data fieldsfor a new contact.2. Scroll to the data field that you wish to edit, and then press (Options) to use the following options:•Save: Save the entries you have entered. •Change Type: Change the category of the phone number. Thisoption can only be used in the phone number data field. •Add New Field: Adds other data fields for a contact.•Delete Field: Removes the selected data field.3. Press (Options) and then select Save to save entries.You can also add a new contact by going to Phone Book > Add.
20 Using Your PhonePhone book entries on phone memory Additional phone book entries on phone memory The contact's name.The contact's mobile phone number.The contact's home phone number.Used to assign a contact to a caller group. Press to select agroup, and then press .Used to set a ring tone for the contact. When there is an incomingcall from the contact, the phone will play this ring tone.A ring tone set in this field will replace the one associatedwith the contact's caller group, if any.Used to set the photo that will appear on the phone's display whenthere is an incoming call from the contact.The photo set in this field will replace the image associatedwith the contact's caller group, if any.The contact's mobile phone number.The contact's home phone number.The contact's office phone number.Other phone number for the contact.The contact's email address.The contact's home address.
Using Your Phone 21SIM Card Phone BookIn the standby screen, press (Names) and then press(Option), select Add. The Add function will prompt you to selectfrom To SIM or To Ph o n e. Select To S I M to add a contact to your SIMcard.The data fields provided by a SIM card phone book are as follows:The contact's office address.The contact's company name.The contact's department name.The contact's job title.Used for notes about the contact.The contact's name.The contact's mobile phone number.Used to select a caller group for the contact. Press to select agroup and then press . When there is an incoming call from thiscontact, the ring tone assigned to this group will sound and thedisplay will show the animation/image associated with the group.To set a ring tone and animation/image for each caller group,go to Phone Book > Caller Group. See page 59.You can also go the menu Phone Book > Caller Group toset a caller group for a contact.
22 Using Your PhoneFinding Contacts in the Phone BookIn the standby mode, press (Names) to display contacts stored inthe Phone Book.There are two ways to locate a specific contact in the Phone Book:•Press to scroll through the names (listed in alphabetical order)until the one you want is highlighted.•Press the alphanumeric key that corresponds to the first letter of thename you wish to locate the appropriate number of times. Forinstance, if the name starts with "K", you would press twice for"K". The names starting with "K" will appear, with the first onehighlighted. Press to scroll to the name you want.You can also go to Phone Book > Find, and then enter the full nameor the first letter of the name to locate a contact.When the desired contact's name is highlighted, you can do one of thefollowing:•Press to dial the first phone number saved in that contact.•Press (Option) to access the following options:Add: Add a new contact to the phone book.Edit: Edit the Phone Book data for this contact. When you arefinished, press . For more information on editing, see page19.Copy to SIM (Phone): If you are currently using a phone bookstored in the phone's memory, you can copy the contact's data tothe phone book stored on your SIM card. Conversely, if you are
Using Your Phone 23currently using a phone book stored on your SIM card, you cancopy the contact's data to the phone book stored in the phone'smemory. The only information that can be copied from a phone bookstored in the phone's memory to the one on your SIM card is acontact's name, phone number, and caller group. If a contact hasmore than one phone number associated with it, when thatcontact's data is copied from the phone to the SIM card's phonebook, each phone number will be stored as separate contact.Delete: Erases the contact's data from the Phone Book.Send vCard: Attaches the contact's data to a message and send itto others.•Press to show the details for that contact. You can then performthe following tasks: Scroll to the number that you wish to dial, and then press .Press (Option) to access the following options:•Add: Add a new contact to the phone book.•Edit: Used to edit the Phone Book data for this contact.•Copy to SIM (Phone): If you are currently using a phonebook stored in the phone's memory, you can copy thecontact's data to the phone book stored on your SIM card.Conversely, if you are currently using a phone book stored onyour SIM card, you can copy the contact's data to the phonebook stored in the phone's memory.•Delete: Erases the contact's data from the Phone Book.•Call: Dial the currently highlighted number.•Send Msg.: Sends a message (SMS or MMS) to the currenthighlighted number.•Send vCard: Attaches the contact's data to a message andsend to others.
24 Using Your PhoneLast Missed, Dialed, and Received CallsThere are two ways you can view the last missed, dialed, and receivedcalls on your phone, as well as information on their date and time:1. If there have been any missed calls, the display will show a missed callmessage along with the number of calls that were missed.Press (View), and then press to scroll to the desired phonenumber.2. In the standby mode, press to view the list of the most recentmissed, dialed, and received calls. Press to scroll to the desiredphone number.The icon will appear beside missed calls; the icon willappear beside dialed calls; the will appear beside received calls.If your network operator is not able to display a certain call's number,the list will not show a number for the call.When the number for a missed, dialed, or received call is highlighted,you can perform the following tasks:•Press to re-dial the number.•Press (Option) to bring up a pop-up menu:Save (Edit): If the phone number for the call has not been storedin the Phone Book, select the Save option to create a contact forthis number in the Phone Book. If this phone number is alreadystored under a contact in the Phone Book, select the Edit optionto edit this information for this contact. For information aboutediting Phone Book data, see page 19, "Adding Contacts to thePhone Book".Delete: Erases the record of the call from the list.Call: Dial the phone number.Send Msg.: Sends a message to this phone number.
Using Your Phone 25Delete All: Erase all the call records.•Press to display the details on this call such as caller's name andtime.Operations During a CallThe following options marked with an asterisk (*) are dependent onnetwork support and may require a subscription.Using the Loudspeaker/HeadsetPress (LoudSp.) to turn on the loudspeaker. Press (Handset) toturn off the loudspeaker.Be careful when turning the loudspeaker on because the volume canbe loud.Putting a Call on Hold*1. When the only call is active:a. Press (Hold) to hold this call.b. Press to end this call.2. When the only call is on hold:a. Press (Unhold) to resume the call.b. Press to end this call.3. When there is an active call and a call on hold.a. Press (Swap) to resume the call that is on hold, and putthe active call on hold.b. Press to show on the display a list of calls that you canend.
26 Using Your PhoneMaking a Second Call*Enter a phone number, or select one from the phone number or callrecord, and then press to dial it. The currently active call willautomatically be placed on hold. However, if there is already one activecall and another on hold, this action will fail.Call Waiting*If there is an incoming call while you are on the phone, a tone willsound through the earpiece and the display will show that a second callis currently waiting. You can handle the waiting call and currently activecall in the following ways:1. Answer the waiting call: Press the currently active call willautomatically be placed on hold. However, if there is already anothercall on hold, a menu will appear on the display allowing you to selecta call to end and then answer the waiting call.2. Reject the waiting call: Press or (End). Pressing (End)will immediately reject the waiting call; pressing will bring up amenu on the display that you can use to select a call to end.In-Call MenuIf you press during a call, it will bring up the call menu. Press to scroll to the desired item and then press to enter that item; press(Back) to return to the pervious menu; press to return directlyto the call menu.Items marked with an asterisk (*) depend on network support andmay require a subscription.
Using Your Phone 27Use Loud Speaker/HandsetAllows you to turn on or off the loud speaker.Be careful when turning the loudspeaker on because the volume canbe loud.Phone BookAccesses data in the Phone Book. For details, see page 19, "PhoneBook".CallsAllows you to view information on missed, received, and dialed calls.See page 24, "Last Missed, Dialed, and Received Calls".Conference*Conference calls allow you to converse with more than one party at atime. The conference menu contains the following options:The maximum number of parties that can be accommodated during aconference call depends on the particular service provided by anetwork vendor.Hold/Unhold/Swap*Toggles the call status.Join/PrivateAdds a party that is on hold to the current conference call, orisolates a single party in a conference call and puts all other partieson hold.
28 Using Your PhoneForwardAllows two parties to connect, while ending one's own call (one ofthe two parties may be involved in an active call while the other iseither on hold or being dialed), so as to allow the two parties tohave their own call.Send DTMFWhen the phone is connected with other devices or services, you cansend DTMF (Dual Tone Modulation Frequency) strings. DTMF stringsare keypad tones that can be sent via the microphone as you dialanother number. Your phone will emit the tones in order tocommunicate with answering machines, pagers, computerizedtelephone services, and so forth.Enter the phone number and then press to send the DTMF string.End CallEnd AllEnds all calls, whether active or on hold.End ActiveEnds only the active call.End HoldEnds only a call or calls on hold.End OneEnds only a single call.Hold/Unhold/SwapToggles the call status.
Using Your Phone 29Mute/UnmuteActivates/cancels the silent mode.MessagesEnters the SMS menu. For details on the SMS menu, see page 37,"Messages".CalculatorAllows you to use the calculator. For information about the calculator,see page 71.Using the Silent ProfileFrom the standby screen, you can long-press to activate the silentprofile. Once it is activated, the phone will alert you to an incoming callby vibrating without ringing.•When you long-press to activate the silent profile, the phone willvibrate for one second. will appear in the standby screen's statusbar when silent profile is activated.•To cancel the silent profile and restore the previously active vibrantand ring tone settings, long-press .To set and select a profile, press . Alternatively, you can go toSettings > Profiles. See page 79.
30 Using Your PhoneCameraYou can take pictures using the embedded camera in your phone, andthen set pictures as wallpapers, or send them to others through MMS.1. From the standby screen, press (Camera) to activate the cameramode. 2. Press (Option) to make the following settings:•Resolution: Sets the desired resolution. •Scene: Base on the light conditions of the environment selected,the camera will automatically adjust its color balance in order foryou to take best-quality pictures.•Effect: Enables you to apply a special effect to your image tocreate an artistic style.•Multi Shots: Allows you to take action stills. When it is set to On,the image resolution will be set to medium by default. When youtake pictures using multi shots, your phone takes and saves fourpictures automatically.The phone saves fewer than four pictures when the memory isnearly full.•Self Timer: When you take pictures using self timer, the phonecounts down three seconds and takes picture. While countingdown, the timer will appear on the external display.•Memory Status: Shows the status of used and remaining memoryfor storing pictures.Option Represented ResolutionHigh 352 x 288Medium 176 x 144Low 80 x 72
Using Your Phone 313. See below list for description of status bar icons. The number at theright corner of the status bar indicates an estimated number ofpictures available to be taken.
32 Using Your Phone4. Press to zoom in or out.Three filled stars indicate that High resolution is in use.Two filled stars indicate that Medium resolution is in use.One filled star indicates that Low resolution is in use.Scene is set to Automatic.Scene is set to Indoors.Scene is set to Outdoors.Scene is set to Night.Multi shots is set to On.Self Timer is set to On.Normal view; no zoomView is zoomed in 2x. Appears when resolution is set to Medium or Low.View is zoomed in 4x. Appears when resolution is set to Low.Allows you to press to zoom in.Allows you to press to zoom out.Allows both zoom in and out.
Using Your Phone 335. When you are ready to take a picture, press . 6. The picture is automatically save in Media Center > Album. Press (Delete) to delete the picture. Press (Option) to access thefollowing options.•Send: Sends the picture in a MMS message.For information about messaging features, see page 37,"Messages".•Set Image ID: Allows you to set the picture as a caller ID.•New Contact: Enables you to create a new contact in thePhone Book using the photo as her/his caller ID.•Existing Contact: Associate the current selected photowith a contact in the phone book entries.This function is only available for contacts saved in the phonememory's phone book.•Set Wallpaper: Allows you to set this picture as a wallpaper.•Rename: Allows you to rename the picture.A picture's name can't be left empty, nor can it share the samename with another picture already stored in your phone.Please note the following while shooting pictures•The external camera does not have a flash. Please take pictures ina well-lit area.•When taking pictures, do not block or touch the camera lens on theback of the phone.•Always photograph your object with the source of light behind you.•Do not shake the phone when taking pictures.•Please be sure that the lens is perfectly clean before takingpictures. Use a soft cloth to wipe the lens if it is not clean.
34 Using Your Phone•Details: Shows the information such as name, date, resolution,and file size.
Using Your Phone 35ShortcutsYou can use the Shortcuts menu to assign 8 alphanumeric keys asshortcuts to commonly used functions or frequently dialed numbers. Key is set to voicemail dialing by default, and is not allowed tobe changed.From the standby screen, press to enter the Shortcuts menu. Thenumbers 2 to 9 displayed on the screen represent the corresponding 8alphanumeric keys on the phone.Setting ShortcutsShortcuts allows you to set up quick access functions or phonenumbers.1. Scroll to move the selection box to the number key you wish to use asa shortcut key. You can also press the actual alphanumeric key toselect it.2. To add a function, press (Option) and select Add Function. Toadd a phone number, press (Option) to and select Add Phone.See step 3 if Add Function is selected. See Step 4 if Add Phone isselected.3. From the function shortcuts list, scroll to select an item. Press tosave the assigned shortcut.4. From the contact list, scroll to select a contact. Press to save theassigned shortcut.5. Repeat the above step to add or modify function shortcuts.
36 Using Your Phone6. To cancel a shortcut key and restore the key's original function, scrollto the shortcut key that you want to cancel, and then press (Option). Select Delete to cancel the shortcut. Using ShortcutsThere are two ways to use shortcuts:1. From the standby screen, long-press an alphanumeric key to accessits assigned shortcut.2. From the standby screen, press to enter the Shortcuts menu.Yo u c a n th e n :a. Scroll to move the selection box to the icon corresponding to thedesired key. Then press to access its assigned shortcut.b. Press the corresponding alphanumeric key to access its assignedshortcut.
Using Your Phone 37MessagesYour phone supports various messaging services including SMS (ShortMessaging Service) and MMS (Multimedia Messaging service). SMSallows you to insert simple animations and ring tones into your shortmessages, while MMS enables you to send pictures, colored images andmusic through your phone. You must have a subscription that supportsMMS. Please contact your service provider for details.From the standby screen, press to quickly enter the Messagesmenu.SMSEditing and Sending a New Short Message1. Go to SMS > New to bring up the message editor so you can write anew short message. Use the alphanumeric keys to enter text.For information on how to use the input methods provided by thephone for writing messages, see page 54, "Input Modes".2. When writing a message, press (Option) to perform thefollowing tasks:•Insert: You can insert the following types of objects:•When there is a new or unread SMS message, the message icon will appear in yellow.•When there is a new or unread MMS message, the message icon will appear in blue. •When phone memory is full, the message icon will appear inred. When SIM card's memory is full, the message icon willappear in red.
38 Using Your PhoneTe x t : This is a list of templates that can be used instead ofentering all the characters individually. You can use thefactory default templates or templates of your own that youpreviously saved to the list.To create your own quick message templates, go the menuMessages > SMS > Templates. See page 41.Image: You can select an animation from the image library toinsert into your message. Press to select image you wishto insert, press once to preview and then press again toinsert the image.Melody: You can select a ring tone from the melody library toinsert into your message. Scroll to ring tone you desire, andthen press to insert the ring tone into your message. Theinserted ring tone will be displayed as musical note within themessage's text.vCard: You can select a contact's data from your Phone Bookto attach to your message. After receiving your message, therecipient can save the attached contact data to their ownPhone Book.vCalendar: You can select a Calendar memo and then attachit to your message. After receiving your message, the recipientcan save this attached memo to their own Calendar.•Alignment: Used to select the type of text alignment for themessage's content.3. After you have finished editing the message, press and thefollowing options appear:
Using Your Phone 39•Send: Press to enter a recipient's phone number editor. Youmay enter a phone number or press (Browse) to selectrecipients from the list of contacts in the Phone Book. Follow thesteps below:a. Press to scroll to the name of contact, and thenpress to select it. Repeat the step to select multiplecontacts.b. Press (Done) to return to the recipient's phonenumber editor.c. Press to send.When the phone is sending a message, "Sending... x/x" willappear on the screen. For example, if you are sending amessage to three people, "Sending... 1/3" will appear when it issending the message to the first recipient, and "Sending... 2/3"will appear when it is sending to the second recipient, and"Sending... 3/3" will appear when it gets to the last recipient.•Save to Draft: Saves the message to the Drafts folder.•Discard: Discards the message.Receiving and Reading a Short Message1. When you receive a new short message, the phone will play the alertsound and the message "1 New SMS" along with the sender's namewill appear. If the sender is not stored in the phone book then onlyphone number will be shown.2. Press to go to Inbox, and then press once again to read yourmessage. Press (Option) the following options appear:Reply: Allows you to write and send a reply message.Delete: Deletes the message being read.
40 Using Your PhoneCall Sender: Uses the number from which the message was sent tocall the sender.Chat: Starts a chat session with the sender.Forward: Forward the massage to others and you may edit thecontent beforehand.Save: Allows you to save the following content:•Save the phone number from which the message was sent(the number shown on the display in the "Sender Info" item)to the Phone Book.•Save the phone number displayed in the message's contents.(the option for a directly displayed number).•If the message has a picture or ring tone attached, you cansave these objects to your phone's memory. Depending onthe type of the object, the phone will save it to thecorresponding category in the Media Center menu.For details on the Media Center menu, see page 65.If you are saving an image or photo, you can select theSave as Wallpaper option, setting it as the wallpaper for thestandby screen. If you are saving a melody, you can also select the Save asRing Tone option, setting it as the ring tone that will playwhen there is an incoming call.•If the message has a contact's information attached to it, youcan save that contact's information to your Phone Book.•If the message has a Calendar memo attached to it, you cansave that memo to your Calendar.
Using Your Phone 41Managing OutboxGo to MMS > Outbox. This option preserves a backup copy ofmessages that you previously sent. Scroll to the massage and then press (Option) to delete, resend or forward the message. Select DeleteAll to erase all messages.Managing DraftsGo to SMS > Drafts. This option allows you to preserve message draftsthat you have saved. Scroll to the desired message record, press (Option) to delete the draft or to delete all, or press to edit themessage.Using the SMS TemplatesGo to SMS > Templa tes. You can use the quick message templates in thismenu to compose a message without having to enter the entire textcharacter by character. You can use the factory default templates, ortemplates that you previously saved to the list. Scroll to the desiredtemplate and then press to insert its text into your message. You canthen edit the text as you wish and then send the message.To create your own quick message templates, press (Option) andthen select Add. You can then enter the text for the template, pressing to save it.If a template is one of the factory defaults, you will not be able to usethe editing function to modify it.Cleaning Up MessagesGo to SMS > Cleanup. This option allows you to cleanup part of or all ofthe messages. The options for cleanup includes All, Inbox, All Read,Outbox, and Drafts.
42 Using Your PhoneSettingsSave Msg. toHere you can determine whether a new message will be savedto the phone's memory or to your SIM card's memory.Service Center No.This feature allows you to save the message center's phonenumber for sending your messages. The messages that yousend are sent to recipients through this message center.Enter the message number provided by the network vendor.After you are finished, press to confirm.Bearer ModeThis can be set according to whether you are using a GPRSnetwork system or a regular GSM dialup network. If you areusing a GPRS network, you can use both the GPRS and dialupnetwork to send and receive SMS messages. If however you areusing a dialup network, you are restricted to using only thedialup network for sending and receiving SMS messages.•GPRS Only: Use only the GPRS network to send and receiveSMS messages.•GPRS First: Use the GPRS network preferentially. Only ifthere is no GPRS network present will the dialup network beused.•CSD Only: Use only the dialup network to send and receiveSMS messages.•CSD First: Use the dialup network preferentially. Only ifthere is no GPRS network will the GPRS network be used.
Using Your Phone 43Valid it y Peri odThis sets the duration that an undeliverable SMS message thatyou send can be stored at the message center. During thisperiod, the message center will continue to attempt to deliverthe message to the designated number.Message TypeYou can request that your network operator convert your textmessages to different types.Status ReportAfter activating this function, the network vendor will reportto you when a message has been delivered.Direct ReplyYou can request that your reply to an SMS be sent directlythrough the sender's message center.
44 Using Your PhoneMMSBefore you start to use MMS, you have to subscribe to both GPRSand MMS services provided by your operator. Then you have toadjust MMS settings in your phone to be able to use MMS.Because MMS uses your operator's MMS server on a GPRS networkto send messages to phones, you need to adjust the followingsettings correctly in order to use MMS:You should contact your operator for details on MMS settings. Someoperators may adjust the settings for you after you subscribe to MMS.Editing and Sending MMS MessagesGo to MMS > New, and follow the steps below to write and send newMMS message.1. Fill in below fields required for sending a MMS message.•To: Press to enter a recipient's phone number editor. Youmay enter a phone number or press (Browse) to selectrecipients from the list of contacts in the Phone Book. Follow thesteps below:a. Press to scroll to the name of contact, and thenpress to select it. Repeat the step to select multiplecontacts.b. Press (Done) to return to the recipient's phonenumber editor.Go to Oper.Service > WAP Service > WAP Setting to create a new WAPprofile for your network settings. See page 75, "WAP Settings" for detailsabout how to set up a WAP profile.Go to Message > MMS > Settings > Server Info to select the MMS serverfor sending and receiving MMS messages.
Using Your Phone 45c. Press to send.•Subject: press to enter the text for the subject.•Content: press to enter the slide editor. See below for detailson the options of editing the content.•Cc: You can send the message as a carbon copy to others.•Bcc: You can send the message as a confidential carbon copy toothers.•Priority: press to set the priority high, normal, or low for thismessage.•Receipt: press to choose from the following receipt modes:Both Delivery/Read: Asks the recipient to return aconfirmation after receiving and reading your message.Delivery Only: Asks the recipient to return a confirmationafter receiving your message.Read Only: Asks the recipient to return a confirmation afterreading your message.None: Cancels this function.2. To edit the MMS message content, scroll to the Content and then press to enter the slide editor. Press (Option) you can execute the following tasks:•Insert: New Photo: Brings up camera view finder for you to take anew photo. The photo can then be inserted into the currentMMS slide afterwards.
46 Using Your PhonePhoto: You can select a photo saved in the Album to insertinto a MMS slide. Press (Save) to immediately insert thehighlighted photo into current slide, or press to view thehighlighted photo. Press will display the next or previousphoto. Press again to save the photo into the slide.Te m p l a t e s : Insert the default MMS templates into yourmessages. Those templates contain images and text. You cancustomize those by inserting more objects you like.Image: You can select a image saved in the image library toinsert into a MMS slide. Press (Done) to immediatelyinsert the highlighted image into current slide, or press to view the highlighted image.Melody: You can select a ring tone saved in the phone toinsert into a MMS page. Scroll to highlight the file name ofthe desired ring tone, and then press to insert this ringtone to the MMS page.Each MMS page is only able to accommodate one image andone audio file. If you insert another image or audio file into thesame page, the newly inserted file will replace the existing one.Text : Enter text templates into your message.Slide Before: Insert a new page before the current one.Slide After: Insert a new page after the current one.•Preview: Plays all the slides in the message in sequence.•Remove Melody: Remove the audio file on the current shownslide.•Remove Text: Remove the text on the current shown slide.
Using Your Phone 47•Remove Image/Slide: Remove the image if your message containsonly one slide. Remove the current shown slide if your messagecontains multiple slides.•Previous/Next Slide: Going to the previous or next slide.•Slide Duration: To set the duration of each slide during playing.For example, 30 means each slide will played for 30 seconds. Each slide allows only one image and one audio file. If you try toinsert a second image or audio, an Out of range message willpop up.3. After you finish all slides for a MMS message, press (Option) andchoose from the following options:•Send: Send the message immediately.•Save to Draft: Store the message in Draft.•Preview: Preview the message.•Discard: Discards the message.Reading an MMS MessageHaving successfully downloaded the MMS message, the display willautomatically switch to Inbox, press to start playing the MMSmessage page by page. Press again to stop playing. Press (Option) to execute the following task:•Reply: Reply to the sender.•Delete: Delete this message.•Forward: Forward the message to someone else.•Save: Save the image shown on the slide or the sender information toyour phone. After you save it, you can go to Media Center > Image tosee it.•Save all: Save the audio files and the images attached on the messageto your phone.
48 Using Your PhoneUsing the MMS TemplatesThese preset MMS templates contain images and text. Scroll tohighlight the template you like and then press to customize thattemplate into your own MMS message.Cleaning Up MessagesGo to MMS > Cleanup. This option allows you to cleanup part of or all ofthe messages. The options for cleanup includes All, Inbox, All Read,Outbox, and Drafts. SettingsBefore you start to use MMS, go to MMS > Settings to adjust thefollowing settings:FilterYour phone will reject all MMS messages from the senderslisted here.ExpirySets the length of time your outgoing MMS message stays onthe server before it reaches the recipient successfully.Reply TypeYou can determine here whether you want to use an SMSmessage or MMS message in reply to an MMS message youhave received.Size LimitSets the maximum size for a message that the phone receives. Ifan incoming message exceeds this size, the phone will not beable to download that message.
Using Your Phone 49Server InfoActivates the MMS server used for sending and receiving MMSmessages.Deferred DownloadAfter you activate this function, the phone will only downloadthe information associated with the sender when it receives anMMS message. You can then decide whether to download thismessage's content after you have read the information relatedto the sender.Delivery ReportAsks the recipient to return a confirmation after receiving yourMMS message.Read ReportAsks the recipient to return a confirmation after reading yourmessage.SMS ChatYou can engage in a peer-to-peer chat session by writing short messagesto another mobile phone user. This feature allows you to have acontinuous text conversation with someone without having to enter thenumber of the recipient each time you have something new to say. Thetext conversation is recorded so you can review what has been said inthe chat session.Starting a chat sessionThere are two ways of initiating a chat session.1. Go to SMS Chat > Start Chat to start a new chat session. Followthe steps below to conduct the chat:a.Enter the nickname for the chat session, and press .b.Enter the phone number of the person you want to chat with.
50 Using Your Phonec.Write your message. When you finish, press to send themessage to invite the recipient to a chat. The chat log showsyour nickname followed by your message as “nickname>message”.d.When the chat message is sent, press (Option) and thenchoose Send to enter another message. The message willautomatically be sent to the same recipient. Repeat the sameprocess to send more messages to the same person.2. Alternatively, to start a chat session, you can select a message fromInbox, press (Option) and then choose Chat. Select a chatpartner from the Nickname list and then press . Write yourmessage and press to send the message to invite the recipientto a chat. Receiving a reply to your chat messageWhen your phone receives a reply from your chat partner, the chatlog will show your partner’s name and message, followed by theprevious message(s) you sent. You can now begin to chat with yourpartner. Receiving a request for a new chatWhen your phone receives a chat request from another person, adialogue box would pop up on the display asking if you want to jointhe chat. Follow the steps below to reply to the chat message:1. Press to view the chat message. 2. Press to join the chat. Enter your nickname and message, andpress to send your message.
Using Your Phone 51Leaving a chat sessionIf you want to leave a chat session, press (back) or . This willtake you back to the SMS Chat menu. You phone will keep therecords of the last chat session. To resume the previous chat session,scroll to select Previous Chat. If you want to start a new chat, go toSMS Chat > New Chat.When you are interrupted by an incoming call during achat session1. Answer the call. Upon ending the call, the display returns to theidle mode. Then you may resume the chat session by selectingPrevious Chat from the SMS Chat menu.2. Reject the incoming call and continue the chat by selectingPrevious Chat from the SMS Chat menu.Voi c e m ai lGet VoicemailUsed to dial the voicemail number provided by your networkvendor to listen to your voicemails.Set NumberYou can save your voicemail phone number here.Your network vendor will provide you with your voicemail inboxnumber and a number for accessing any other voicemail services.For detailed information about voicemail services, contact yournetwork operator to see if you need to save a specific phone numberto your phone in order to access your voicemail inbox.
52 Using Your PhoneCell BroadcastCell broadcast messages are general messages that your networkoperator broadcasts to all phones within a particular area. Thesemessages are broadcast in numbered channels. For example, channel030 might be for local weather, 060 for traffic reports, 080 forinformation about local hospitals, taxis, pharmacies, and so forth.You can receive cell broadcast messages that your network operatorbroadcasts, and select your preferred topics and languages.For more information about available channels and a list of theinformation they provide, contact your network operator.When you receive a cell broadcast, the content will be displayed twicein ticker-tape fashion.ReceiveAllows you to select whether or not to receive cell broadcastmessages.TopicsAllows you to decide what information you wish to receivefrom your network operator's cell broadcasts. The topics listedin the To p i c s list represent the broadcast information that youhave selected to receive from your network operator.If you have not previously saved any topics, you can press(Option) and then select the Add option to enter thechannel in From and To fields.LanguageYou can limit the cell broadcast information that you receivefrom your network operator to a specific language. Press to select your preferred language, and press (Save) to savethe setting.
Using Your Phone 53Memory StatusDisplays the amount of remaining available memory, includingpictures, animations and ring tones stored on the phone.
54 Using Your PhoneInput ModesWhen an editing screen is displayed, the current text input mode isindicated in the upper right corner of the screen. The phone has thefollowing input modes. Long-press to switch between upper andlower case. Changing the Text Input ModePress to change the input mode. Press to open the symbolstable. iTap (predictive input mode) for uppercase letters. iTap (predictive input mode) for lowercase letters.Uppercase letters input mode.Lowercase letters input mode.Numeric input mode.To set the default input mode to the one you most frequently use,choose the menu Settings > Input > Default. See page 92.
Using Your Phone 55Predictive Input Mode (iTap)How to use iTap•Press each key associated with the letter you want to enter only once.The letters you have entered appear on the display. The candidatewords will change with each key you press.•If the first highlited candidate word is the wrong word, scroll to viewother candidate words and locate the desired word.•Once the correct word is located, press to enter this word.•While entering text, use the joystick to move the cursor. Press once to delete a character; long-press to delete all entered text.•Long-press to switch between upper and lower case.Example of iTap in useTo enter "COME HOME" using iTap:1. Press to select C, O, M, E.2. Press to enter "COME" as text. A space will automatically beinserted after "COME".3. Press to enter "HOME".4. Since "GOOD" is not the word that you wish to enter, scroll to thenext candidate word "HOME".5. Press to enter "HOME".
56 Using Your PhoneLetter Input Mode (ABC)How to use the letter input mode•You must press the key corresponding to the desired letter the correctnumber of times in order to enter the letter you want. Display lettersfor entry according to the order shown on each key. Pressing a keyonce will display the first letter listed on the key, while pressing ittwice will display the second letter, and so on.•When you have entered a letter and wish to enter the next letter,either wait for two seconds until the cursor moves to the next textentry position, or immediately press the key for the next letter.•Short press to enter a space before beginning a new word.Long press to begin a new line.•While entering text, use the joystick to move the cursor. Press once to delete a character; long-press to delete all entered text.•Long-press to switch between upper and lower case.Numeric Input Mode (123)The numeric input mode allows you to use the alphanumeric keys to to enter numbers.Symbol Input ModeTo open symbol table, press . Press to place the symbol in thetext. Press to hide the table.
Using Your Phone 57Direct Connection to URLsYour phone provides preset URL text hotkeys. It allows you to efficientlyenter a URL address.For example, if you want to enter "http://123.com", you simply key in"123" in the standby screen and then press . The full URL will appearon the screen.To connect to this URL, press .•Press to switch to the URL suffixes shown in the chart:•You can convert (*) into the (.) that appears in URL addresses.For example, if you enter 123*456 in the standby screen, and thenpress , the URL "http://123.456.com" will appear on the screen.•Press will switch between "/" and "-".•When the screen shows the desired URL, press to connect tothis URL address.Number of times Output result0 . com1.com.tw2.net3 .net.tw4.com.cn5 .net.cn
58 MenusMenusThe phone's menus provide various features. The main menu consistsof 9 icons. Each icon represents a particular menu item, which is used toaccess related sub-menus.For information about navigating menus, see page 14, "MenuNavigation".Phone BookThis menu provides various functions for managing the Phone Book,including the ability to add, locate, and copy contact data; add contactsto a caller group; and so forth.FindUsed to locate a contact in the Phone Book. You can enter the full nameof the desired contact, or if you are not sure about the spelling of thecontact's name, simply enter the first letter, and then press . Thephone will locate all contacts whose names begin with this letter, andyou can scroll to the field containing the contact you want. For details,see page 20.AddUsed to add a new contact to the Phone Book. You will be prompted toselect from To S I M or To Pho n e. Select To S I M the contact will be savedon your SIM memory, and select To P h on e the contact will be saved onthe phone. For details, see page 19, "Adding Contacts to the PhoneBook".
Menus 59EditAfter selecting a particular contact, you can follow the proceduredescribed on page 19 for editing the data for this contact.CopyIf you are using the phone book stored in the phone's memory, you cancopy contact data to the SIM card's phone book, and vice versa. You canselect a contact to copy from one phone book to the other, and copy allcontacts in one phone book to the other by choosing the option AllPhone to SIM (All SIM to Phone).DeleteDeletes a contact from the Phone Book. You can delete one contact at atime, or delete all contacts at once. Caller GroupCaller groups are combinations of phone settings used to identify aparticular group of contacts. For example, you can associate a ring toneand a image with one group, and when a member of that group calls,the phone will use the group's ring tone and display its image.The phone provides 5 caller groups: Colleagues, Family, Friends, VIP,Others.Scroll to the caller group that you wish to configure, you can performthe following tasks:•Press (Option): Used to select the ring tone or image ID thatwill help you identify the caller group to which a particular callerbelongs, or to rename the caller group.•Press : Allows you to view a list of all contacts that belong tothe caller group. Press to highlight the desired contact, andthen press (Option) to add or delete a contact.
60 MenusBusiness CardYou can use this option to enter your own business card information.The data fields are as follows:Press to scroll to the data field you wish to edit, and then press to begin entering the text. After you are finished entering the data, press to return to the previous screen. Press (Option) and select Saveto save all the business card data, or select Send vCard to send thisbusiness card as an attachment in a short message. My NumberThis option allows you to save your SIM card number and name to yourSIM card's memory.Press (Option) and select Add to enter your name and number.When you are finished, press (Option) and then select Save to saveyour data. If you wish to edit the current name and number, press(Option) and select Edit to edit the currently selected data.Memory StatusShows you the entries that have been stored and the maximum entriesthat can be stored, on the SIM and on the phone.Your name.Your mobile phone number.Your e-mail address.Your company's address.Your job title.
Menus 61MessagesFor a description of the features available in the messages menu, seepage 37, "Messages".CallsYour network operator must support this feature in order for you to beable to use it.This menu includes a list of your missed calls, dialed calls, and receivedcalls. Call costs and time are also recorded.MissedShows your most recent missed calls.Press to scroll to the missed call that you wish to select. You cannow choose to view, edit, or delete the number for the missed call. Theprocedure is the same as that described on page 24, "Last Missed,Dialed, and Received Calls".ReceivedShows your most recent received calls.The procedure for using this feature is the same as that described onpage 24, "Last Missed, Dialed, and Received Calls".DialedShows your most recent dialed calls.The procedure for using this feature is the same as that described onpage 24, "Last Missed, Dialed, and Received Calls".
62 MenusCleanup AllDeletes all call records.DurationThis feature is only accessible if supported by your network operator.LastShows the duration of the last call.AllShows the total time for all calls.ReceivedShows the total time for all received calls.DialedShows the total time for all dialed calls.ResetClears all call time records.You must enter your PIN2 code in order to zero call times.What is a PIN2 code?•The PIN2 is the second PIN code. Its main use is in controllingrestricted services-for example, call time limits and restricted phonenumbers.•If the PIN2 code is incorrectly entered three times consecutively, thePIN2 code will be locked. To unlock the PIN2 code, you will need toenter the PUK2 code, which you obtain from your network operator.
Menus 63CostLastShows the cost of your last call.Requires the support of the network operator.AllShows the total cost of all calls.Requires the support of the network operator.ResetClears all call cost records.Requires entry of the PIN2 code.Cost LimitShows the current limit set for total call costs.SetAllows you to first enter the unit price and a currency forcalculating call costs.Requires entry of the PIN2 code.
64 MenusGamesYour phone provides a number of exciting games that you can use toentertain yourself when you have a spare moment.GamesCherry BoyEda Mouse This game contains five levels and in each level theplayer has three lives. To pass one level you mustcollect all the cherries before time is up, or youmust obtain the key to the next level. If you bumpinto a monkey, you lose one life.This game contains eight levels and to pass eachlevel player has to eliminate the fruit to a certainamount. You pass one level when your score hasreached a thousand points. To eliminate the fruit,player has to arrange at least three identical fruit ina row. You lose the game when the fruit reach theeda mouse's head.
Menus 65CameraThe digital camera function you access through the main menu is thesame as pressing (Camera) from the standby screen. For details onhow to use the camera, see page 30, "Camera".Media CenterAlbumAlbum stores picture you have taken. When you enter the menu, thephotos will be displayed as thumbnails and details of each photo will beshown.1. Scroll to the desired picture.2. Press to display the picture in full screen. Scroll up or down todisplay the next or previous picture.3. Press (Option) to perform the following:Delete: Deletes the picture.Set Image ID: Allows you to set the picture as a caller ID.•New Entry: Enables you to create a new contact in thePhone Book using the photo as her/his caller ID.•Exist Entry: Associate the current selected photo with acontact in the phone book entries.Set Wallpaper: Allows you to set this picture as a wallpaper.Send: Sends the picture in a MMS message.For information about messaging features, see page 37,"Messages".Rename: Allows you to rename the picture.
66 MenusDelete All: Deletes all the photos in the album.Details: Shows the name of the photo, the date it was taken, andthe size of the image.ImageThis image library stores the phone's default images, as well as imagesreceived in messages, downloaded through WAP services or usingmultimedia communications tools. You may set the image as caller IDimage, or send the image in a short message. MelodyThis ring tone library includes the phone's default ring tones, as well asring tones received in messages, or downloaded through WAP servicesor using multimedia communications tools.Scroll to the desired ring tone, and press (Option) to perform thefollowing tasks with the ring tone:Set Ring ID: Set the current selected ringtone for a contact. Whenthere is an incoming call from the contact, the phone will play thisring tone.•New Contact: Enables you to create a new contact usingthe current selected ringtone.•Existed Contact: Associate the current selected ringtonewith a contact in the phone book entries.•Set Ringtone: Makes the ring tone the alert sound for incomingcalls.The file formats supported by the phone are BMP, PNG, GIF, JPEG(progressive or marithmetic-encoded saves not supported), and EMSpicture.The phone supports the following music file formats: MIDI, SMAF,and iMelody.
Menus 67•Rename: Allows you to give a new name to the ring tone.The phone's default ring tones cannot be renamed, so they donot present this option.•Delete: Deletes user-defined ring tones.The phone's default ring tones cannot be deleted. Only user-defined ring tones provide this option.•Send: Sends the ring tone in a message.For information about messaging features, see page 37,"Messages".•Details: Displays the name of the ring tone, its file size, andwhether it is a default ring tone, or a file that you have saved ordownloaded yourself (noted as User Defined).Cleanup AllDeletes all the data stored in the media center.Memory StatusDisplays the amount of remaining available memory, including photos,images, and ring tones stored on the phone.
68 MenusToolsAlarm1. Select the alarm you wish to set and press .2. The status of the alarm will appear, press to set the alarm statuson or off.3. After your alarm is turned on, setting options appear as shown in thechart below:If you activate the Alarm Clock feature, when the specified date andtime arrive, the phone will sound the alarm, even if your phone isturned off.Switch the alarm on or off.Enter the time when an alarm will go off.Use to set the alarm mode:•Once: Alarm will go off only once.•Daily: Alarm will go off daily.•Weekday: Alarm will go off Monday through Friday.Allows you to select the length of the alarm. Press to select thedesired alarm duration.Set the ring tone for the alarm. Press (Set) and then select thedesired ring tone.
Menus 694. Lastly, you must press (Save)to save all your current Alarmsettings. After completing Alarm settings, will appear in thestandby screen's status bar.Auto Time ZoneIf during travel, you move between time zones, the phone willautomatically adjust the time displayed on the screen based on the timezone prompts provided by the local network operator so that you alwayshave access to accurate local time.OnThe time displayed on your phone will be reset automaticallyaccording to the local network operator's time zone prompts.OffYou phone will display the time you have set, and when you travelto other time zones, the phone will ignore time zone promptsissued by the local network operator.Confirm FirstThe phone will ask for your confirmation before it resets its time.CalendarYou can use the Calendar to set up memos for forthcoming events suchas a meeting, an appointment, or a friend's birthday. The Calendar willalso remind you about events you have previously scheduled. 1. When you open the Calendar, the phone will show the calendar forthe current date. If you have not set the current date on your phone, go the menuSettings → Date & Time. See page 78.
70 Menus2. In the Calendar screen, press to move the red box to the datewhere you wish create a memo. You can also press (Option) andselect the Go to Today option.3. When the red box is highlighting the desired date, press (Option) and select the Add option to open the memo editor. 4. In the memo editor screen, scroll to the data field you wish to edit,and then press , or press alphanumeric keys to begin enteringdata. You can enter data in these fields:Enter the subject for the event.Enter the start date of the event.Enter a start time of the event.Enter the end date of the event.Enter an end time of the event.This option allows you to set the time you want the reminder toremind you about the event. For example, if you want the reminderto sound 30 minutes before the meeting, chose 30 minutes to setthe reminder to do so.This option allows you to set the reminder repeatedly to go off. For example, if a meeting is held every Thursday starting 2004/08/05, you may select 2004/08/05, and then chose Weekly to set thereminder to go off on Thursdays beginning with 2003/08/05.Enter a location for the event.Enter the names of the participants in the event.
Menus 715. After completing entry of data in each of the fields, you must press (Save) to save the memo to that date.ShortcutsFor a description of the features accessible through the Shortcuts menu,see page 35, "Shortcuts".CalculatorAllows you to use the phone as a calculator. Use to perform themathematical operations shown on the screen. Press to enter adecimal point.You can enter numbers up to a maximum of 8 digits in length.Currency ConverterBelow is a description of the Currency Converter screen:1. To set the currencies for conversion, press (Option) and selecteither Currency 1 (to set the currency at the top of the screen) orCurrency 2 (to set the currency at the bottom of the screen), thenpress to confirm. After selecting a currency from the list, press.2. Used to set the exchange rate. Press (Option) and select RateSetting, then enter the rate for converting from Currency 1 toCurrency 2. The conversion calculation result will be displayed in theRecord any notes about the event.
72 Menussame line as the bottom currency on the screen. Use the to viewthe calculation result. The calculation can provide precision up totwo decimal places.The exchange rate field can accommodate a maximum of five digits(including decimal digits).3. After returning to the Currency Converter screen, you can select oneof the currencies and then enter an amount that you wish to convertinto the other currency.You can enter amounts up to six digits long.4. After pressing the converted amount will appear in the field forthe other currency.Stopwatch 1. Press to start the stopwatch.2. While the stopwatch is running, you can press (Split) to save upfour elapsed times. The display will show the saved times in the lowerpart of the screen.3. Press to halt the stopwatch.4. Press (Reset) to zero the stopwatch.
Menus 73Oper. ServiceYour phone includes a built-in WAP browser, allowing you to use thephone for mobile Internet connectivity. You can browse the onlineservices offered by the network operator or ISP, such as information onfinancial news, sports, travel, and entertainment. To use the phone toget online, necessary WAP and GPRS settings must be made in thismenu.You must apply to a network operator for WAP services and completeWAP and GPRS settings in this menu before you will be able to takeadvantage of mobile Internet connectivity. In general, once theservice you have applied for has been activated, the network operatorwill automatically transmit the needed settings to your phone. If this isnot the case, you must perform this configuration yourself. Forinformation about WAP and GPRS services and configuration details,contact a network operator providing these services.WAP S er v iceYour phone provides the following methods for activating the browserand getting online.1. From the standby screen, activate the browser and get online byusing the feature that allows you to connect directly to URLs. Fordetails, see page 57, "Direct Connection to URLs".2. Activate the browser from the three options in the menu Oper.Service > WAP Service:•Start Browser: Starts up the browser and connects to thehomepage.•WAP Message: Starts up the browser and accesses the WAPinbox for reading text messages.•Goto URL: Starts up the browser and connects to the URL thatyou enter.
74 MenusStart BrowserStarts up the browser and connects to the homepage.Browsing a webpageReferring to the soft key commands at the bottom of thescreen, press and to perform needed tasks whilebrowsing a webpage. Press to scroll up or down awebpage. For details on browsing a webpage, inquire with thenetwork operator providing WAP services.How to close the browser and end the online sessionWhile online, press or long-press .If you are already viewing a WAP webpage, long-press or from the browser's menu select Exit.WAP MessageWhen you receive a new WAP message, the status bar will show the icon to remind you that you have an unread WAP message. Starts upthe browser and displays the WAP inbox so you can read WAPmessages.Goto URLEnter the URL of the webpage that you wish to browse, and thenscroll to the Go option and press (Go) to link to that URL.ResumeReturns to the last webpage you viewed.
Menus 75WAP S e t t i ng sAllows you to make settings for the WAP servers of six differentnetwork operators, and select the server that you would like to usewhen connecting to the Internet. By scrolling to a particular groupof WAP server settings that you wish to modify, and then pressing(Option), you can create a new group of settings, edit thesettings, or delete the settings.WAP server settings include the fields listed below. Press (Edit)to edit the setting in each field.•Profile Name: Gives the WAP server settings a name.•Homepage: Sets the webpage that the browser will link to when itis started up.•IP Address: Enter the IP address used for accessing the mobileInternet.•Port: Enter the connection port specified by the network operator—for example, 9201.•Bearer Mode: Before connecting to the Internet, you must set thisitem according to whether your Internet connection bearer modeis a GPRS network system or a GSM dialup network. Doing sowill allow you to properly link to the data network to browse WAPpages, download Java programs, and so forth. If you are using aGPRS network, you can use both the GPRS and dialup network toconnect to the Internet. If, however, you are using a dialupnetwork, you are restricted to using only the dialup network toconnect to the Internet.GPRS Only: Use only the GPRS network.GPRS First: Use the GPRS network preferentially. Only ifthere is no GPRS network present will the dialup network beused.CSD Only: Use only the dialup network.
76 MenusCSD First: Use the dialup network preferentially. Only ifthere is no dialup network will the GPRS network be used.•GPRS: To modify settings for a GPRS account, press (Edit) toedit the settings in each field. GPRS settings include the followingfields:APN: Enter the APN (Access Point Name) assigned by yournetwork operator.User Name: If needed, enter the user name provided by yournetwork operator.Password: If needed, enter the account password provided byyour network operator.•CSD: If you are using a GSM network, you must configure andactivate a CSD account. Press (Edit) to edit the settings in thefollowing fields:Dial Number: When you start up the browser to connect tothe Internet, you phone will dial this number. Your telecomsnetwork operator or ISP will provide this number to you.User Name: This is your user account name, and is providedby your network operator.Password: The account password provided by the networkprovider.A dialup network is a GSM Circuit Switch Data Service (CSDfor short). Using a dialup network can be likened to using ahome computer's modem, in that before connecting to theInternet a number must be dialed. As for GPRS, it like theLANs used at company, where users do not need to dial anumber to access the network. Regular GSM users who arenot using a GPRS network system can only have a dialupconnection to the Internet.
Menus 77Line Type: This is the type of dialup connection. Press to select.Baud Rate: The default value is 9600, which is the standardspeed for data connections with a GSM mobile phone.Auth Type: This is information needed fortelecommunications protocol authentication.Clear CacheClears webpage content that the browser temporarily stores inmemory.Clear BookmarksClears bookmarks saved in the browser.STKYour network operator provides this STK (SIM Tool Kit) menu.Depending on your SIM card and the services provided, there will beseveral extra options under this menu. However, if your network operatordoes not offer STK services, this menu will not appear on the screen. Fordetails, please contact your operator.
78 MenusSettingsDate & TimeUsed to set the time and date, as well as the format in which the timeand date will be displayed on the startup screen. Press to save thesettings.DateEnter the date using appropriate number keys.TimeEnter time using appropriate number keys.FormatThis option is used to decide the format in which the time and datewill appear in the standby screen.Auto Power On/OffDesignates a time for the phone to be automatically turned on or off. Ifthis option is activated, the phone will be automatically turned on or offat the designated time each day. Power OnWhen you see Status Off displays on the screen, press andchoose the On option, scroll to Time and then enter a time youwish the phone to be auto turned on.When riding in an airplane or in any other situation where you cannotuse a mobile phone, remember to deactivate the Power On/Offoption.
Menus 79Power OffWhen you see Status Off displays on the screen, press andchoose the On option, scroll to Time and then enter a time youwish the phone to be auto turned off.ProfilesA profile is a group of settings that determine whether the phone willalert you to incoming calls through a ring tone or a vibrating alert, andhow ring tones in general are used on the phone. These settings allowthe phone's operation to best suit the environment you are in.1. Press to scroll to the desired profile and then press toactivate this profile. You can choose from among the followingprofiles:NormalThis is the default profile. Once this profile is activated, thestandby screen's status bar will show the icon.MeetingThe options in this profile have been preset to suit a meetingenvironment (for example, only a vibrating alert is used, withno audible ring tone and no keypad tones). Once this profile isactivated, the standby screen's status bar will show the icon.SilentThe options in this profile have been preset for occasions wheresilence is required (for example, there will be no audible ringtone, no keypad tones, and no vibrating alert). Once thisprofile is activated, the standby screen's status bar will show the icon.
80 MenusOutdoorsThe options in this profile have been preset to suit an outdooractivity (for example, use of the highest ring tone volume,activation of both ring tone and vibrating alerts, and use ofkeypad tones). Once this profile is activated, the standbyscreen's status bar will show the .HandsfreeThis profile is only active when a hands-free kit is attached tothe phone. Once this profile is activated, the standby screen'sstatus bar will show the icon.AirplaneWhen you are on a plane, you can select this profile to turn offthe phone. Once this profile is activated, the phone willautomatically be powered off, and all alarms will be suspended.If the phone is turned off by long-pressing , the alarms willstill go off at the appointed times.PersonalYou can use this profile as a group of custom settings, andrename the profile if desired. Once this profile is activated, thestandby screen's status bar will show the icon. If you haverenamed this profile, the new name will replace Personal in theprofiles list.2. Press to scroll to the desired profile, and then press (Edit) tomodify the settings listed below and adjust the profile to suit aparticular environment.VibrationIncludes the following setting options:
Menus 81•Ring Only: When there is an incoming call, the phone willuse a ring tone but no vibrating alert.•Vibrate Only: When there is an incoming call, the phone willuse a vibrating alert but no ring tone.•Ring & Vibrate: When there is an incoming call, the phonewill use both a vibrating alert and a ring tone.•Vibrate then Ring: When there is an incoming call, the phonewill first use a vibrating alert and then a ring tone.Call RingYour phone includes various types of ring tone melodies. Scrollto the desired ring tone, and after one second or so you will beable to hear that ring tone. Press to confirm your selection.Message ToneThe ring tone that your phone uses when a message is received.Calendar ToneThe ring tone used for Calendar events for which you have setan alarm.Keypad ToneDetermines whether keypad tones are played when keys arepressed.Ring VolumePress to adjust the ring tone volume or mute the ring tone.Answer Mode•Send Key: Allows incoming calls to be answered only bypressing .
82 Menus•Any Key: Allows any key except to be used to answer anincoming call. In this mode, is used to reject anincoming call, and not to answer.•Automatic: If the Automatic answer mode is activated, thephone will ring for five seconds, and then the incoming callwill be automatically answered (only the Handsfree profileallows this setting).RenameAllows you to provide a new name for the profile (onlyavailable for the Personal profile).RestoreReturns the above settings for the profile to their factorydefault values.Requires entry of the phone password, whose default valueis 1234.DisplayWal lp aperDesignates the wallpaper used for the main display's standbyscreen. Select image or photo and press to enter the image orphoto library. Scroll to the name of the image or photo that youwish to use, press to view the whole image. Press willdisplay the next or previous image or photo; Press to confirmyour selection.Welcome MessageUsed to select and configure the image, photo, music or text that isdisplayed when the phone is turned on.
Menus 83•Image: Press (Edit) to enter the image library. Only theimage selected in this option will be displayed when the phone isturned on. After selecting an image, you will need to select thedesired music to be played when the phone is turned on. SelectSilent if you do not wish any music to be played. •Photo: Follow the same steps as selecting images. •Te x t : Press (Edit) to input the text. Only the text entered inthis option will be displayed when the phone is turned on. Afterinputting text, you will need to select the desired music to beplayed when the phone is turned on. Select Silent if you do notwish any music to be played. •Off: Returns the settings for startup music and animation to theirfactory default values.Personal BannerEnter the text you wish to be displayed on the standby screen.ContrastPress to adjust the contrast of the screen's display. Press toconfirm the setting.BrightnessPress to adjust the brightness of the phone's displaybacklighting. Press to confirm the setting.
84 MenusAudioThis menu allows you to set various sounds that the phone uses.Some of the options provided in this menu and the Profiles menu areidentical (for example, Call Ring). Therefore the particular setting thatthe phone uses will depend on which menu you last used to make thesetting.Call SettingsAnswer Mode•Send Key: Allows incoming calls to be answered only by pressing.•Any Key: Allows any key except to be used to answer anincoming call. In this mode, is used to reject an incomingcall, and not to answer.•Flip Answer: Allows you to answer incoming calls by flippingopen the phone.Connect AlertThis feature allows the phone to provide a ring tone or vibratingalert, or flash the backlighting when the recipient of a call hasanswered.Minute MinderIf you turn this function on, the phone will emit a beep per minuteduring a call.Show NumberYou can decide whether or not to display your phone number onthe recipient's phone when you make a call.
Menus 85On: When you call someone, the recipient's phone will display yourphone number.Off: Your phone number will not be shown on the recipient'sphone.If this feature is turned off, you may not be able to make phonecalls in certain countries, such as Singapore and China.Preset: Whether your phone number will be displayed on arecipient's phone will be determined by the default set by thenetwork operator.Call DivertRequires the support of the network operator.Forward AllForwards all incoming calls to a designated phone number orvoicemail inbox. When you use this feature, you must enter aphone number to which to forward incoming calls.After the Forward All mode is activated, the standby screenwill display the icon.When BusyThe phone will divert incoming calls to another number whenyou are in the middle of another call.No ReplyForwards incoming calls to another number when you do notanswer.Not ReachableDiverts incoming calls when your phone is turned off oroutside network coverage.
86 MenusCancel AllCancels all call divert options.Call BarringYou can request that your network operator block the dialing orreceiving of certain calls. The call barring services below require thesupport of your network operator. To activate or cancel any of theoptions below, you must enter the network password provided bythe network operator.All OutgoingBlocks dialing of any calls from the phone.Intl. OutIf this option is activated, no international calls can be madewith your phone.Intl. Except HomeIf this option is activated, your phone can only be used to diallocal calls and calls to your home country from abroad. Otherinternational calls will be barred.All IncomingRejects all incoming calls.Incoming When RoamingIf you are in another country (using roaming), activating thisoption will cause the phone to reject all incoming calls.Cancel AllCancels all call barring settings. You must enter the networkpassword in order to cancel these settings.
Menus 87Change PasswordYou can change the network password, which can be obtainedfrom the network operator.Call WaitingIf there is an incoming call when you are in the middle of anothercall, the screen will display the number of the incoming call and callwaiting message to alert you. You can activate, cancel, or view thestatus of this feature from this menu.You must apply to the network operator for the call waitingservice in order to use this feature.Auto RedialIf there is no answer at a number you have dialed, the phone willautomatically redial.Fixed Dialing NumberAfter this feature is activated, the phone will only be able to dialnumbers on the Fixed Dial Number list. If a number is not on thelist, calls cannot be made to this number.When you activate or cancel this feature, you must enter thePIN2 code.If the PIN2 code is entered incorrectly three consecutive times,the PIN2 code will be locked down. You will need the PUK2 codeto unlock the PIN2 code. Contact your network operator to obtainthe PUK2 code.
88 MenusBefore activating the Fixed Dial Number feature, you must press(View), then press (Option) and select Add to create aFixed Dial Number list. You must enter the PIN2 code, and thenadd a new number to your Fixed Dial Number list.After creating the list, you can view, edit and delete numbers in thelist.Active LineThis feature allows you to use two different phone numbers on onephone. You can designate one number for dialing calls, whileaccepting incoming calls dialed to both numbers without needingto use two phones. Select either Line 1 or Line 2. The number youselect ( or ) will appear on the standby screen.This feature requires the support of the network operator.User GroupUser GroupUsed to create a closed group of callers based on a serviceprovided by the network operator. The members of a UserGroup can call each other, but cannot conduct calls withanyone outside the group unless special provisions are made.This option can be used to select whether or not to activate thisservice.
Menus 89Outside AccessWhen the User Group service is activated, enabling OutsideAccess will allow users in the group to make calls to numbersoutside the group. However, incoming calls will still berestricted to calls from within the group.NetworkGenerally speaking, the choice of the network that your phone uses isconfigured automatically. When turned on, the phone willautomatically connect to the network provided by your networkoperator, or will automatically connect to the roaming network whenyou are outside the coverage of your regular network.If you wish to change the connection network, this menu will allow youto select the network you want to use. When outside the coverage ofyour regular network in your home country or when abroad, you canmanually select the local network system.Your network operator must be able to support network selection inorder for you to use this feature.Network ModeYou can choose whether the network selection mode that the phonewill use when it is turned on is automatic or manual.Automatic: If this option is selected, when outside the coverage ofyour regular network, the phone will automatically search forusable networks.Manual: If this option is selected, when outside the coverage ofyour regular network, the phone will list all the networks of telecomvendors and allow you to choose.
90 MenusAvailable ListAllows you to manually select a network. Your phone will list all thenetworks of telecoms vendors so you can choose.Not all networks listed will necessarily be available for use. If yourequire further information, contact your network operator.Band SettingAccording to your requirements, you can set an appropriate bandin the GSM network system.ConnectionUsed to set whether the phone will also search for a GPRS networkwhen it is turned on.•GPRS & GSM: When it is turned on, the phone will search foravailable GPRS and GSM networks.•GSM Only: When it is turned on, the phone will search only for aGSM network.Service ToneUsed to set whether the phone will sound when it detects anavailable network.
Menus 91SecurityYou can use a PIN code, phone password, and SIM card lockauthentication to prevent unauthorized use of the phone.PIN Code A PIN (Personal Identification Number) code is a passwordprovided by a network operator. When PIN code authentication isactivated, it will prevent unauthorized use of the SIM card. Unlessthe correct PIN code is entered when the phone is turned on, theSIM card cannot be used, even if it is inserted in another phone.PIN CodeUsed to activate/deactivate or change the PIN Code. Beforechanging settings for the PIN Code feature, the previously setPIN Code must be entered.If you wish to change the PIN Code, you must press in theEnable item to select On, so that you will be able to enter andconfirm the new password.PIN2 CodeUsed to change the PIN2 code. The procedure is the same as forthe PIN Code.If the PIN code is entered incorrectly three consecutive times,this will cause the SIM card to lock down, and a PUK1 codeprovided by the network operator will be required to unlock it.After unlocking, the PIN code will be automatically set to activateonce the phone is turned on.
92 MenusPhone LockOnce the phone lock is activated, you will be required to enter thephone code when the phone is turned on. You must enter thecorrect code to unlock it (the default phone code is 1234). Whenthe phone is locked, you will only be able to make emergency calls.SIM LockWhen activating the SIM Lock, you must enter the SIM Lockpassword (the default SIM Lock password is 1234). The passwordmust be between 4 and 8 digits. Your phone allows you to use threedifferent SIM cards, and you are required to enter the SIM cardpassword if the card you use is different than the first three.Screen LockUsed to create a security screensaver. When you have notperformed any tasks with the phone for a set period of time, thephone will automatically activate the screensaver.Power Saving ModeAfter you activate the power saving mode, keypad and displaybacklighting will be turned off, in order to conserve power.LanguageYou can select the language that the phone will use to displayinformation.InputYou can set the default input mode that will be automatically activatedwhenever you open the editing window for entering information into amessage, the Phone Book, and so forth.
Menus 93RestoreRestores all of the phone's settings to their factory defaults.
94 Care and MaintenanceCare and MaintenanceTake note of the points noted below to ensure that you are using thephone properly and to extend the lifespan of the phone.•Store the phone and its accessories out of the reach of children.•Keep the phone and accessories dry, and use the phone inenvironments where the temperature is between -10°C and 45°C.High or low temperatures outside this range may damage the phone.•If possible, do not use or store the phone in excessively dusty or dirtyenvironments.•Do not remove the warranty seal on the phone yourself, nor allow anunauthorized dealer to do so.•Do not use strong detergents or organic solvents to wipe or clean thephone.•If your phone or its accessories are not operating normally, contact anauthorized dealer immediately.•Use only genuine BenQ accessories such as batteries, battery chargerand hands-free kit to ensure the phone's normal operation andpreserve battery life, as well as protect the safety of your person andbelongings. Use of non-BenQ accessories will not allow your phone toachieve optimal performance, and may cause the phone tomalfunction. Any malfunctions or damage caused by the use of third-party accessories are not be covered by the terms of the productwarranty, and will void the product warranty.•Avoid allowing objects that may discharge electricity to contact thecharging socket on the bottom of the phone or the metal contacts onthe battery, as this may cause short circuits and put you in danger.
Troubleshooting 95TroubleshootingIf you encounter problems while using the phone, or if it performserratically, you can consult the information in the chart below. If yourparticular problem cannot be resolved using the information in thechart, contact the dealer where you purchased the phone.Problem Possible cause SolutionPoor reception•The network signal is tooweak at your currentlocation —for example, ina basement or near a tallbuilding-because wirelesstransmissions can noteffectively reach it. Move to a location where thenetwork signal can beproperly received.•The network is busy atthe current time (forexample, during peaktimes, there may be toomuch network traffic tohandle additional calls).Avoid using the phone atsuch times, or try again afterwaiting a short time.•You are too far away froma base station for yournetwork operator.You can request a servicearea map from your networkoperator.Echo or noise•Poor network trunk qualityon the part of yournetwork operator.Hang up the phone and dialagain. You may be switchedto a better-quality networktrunk or phone line.•Poor local telephone linequality.
96 TroubleshootingShortened standby time•The standby time is related to your network operator's system configuration. The same phone used with different network operators' systems will not provide exactly the same length of standby time.If you are located in an areawhere signaling is weak,temporarily shut off thephone.•The battery is depleted. In high-temperature environments, battery life will be shortened.Use a new battery.•If you are not able to connect to the network, the phone will continue to send out signals as it attempts to locate a base station. Doing so consumes battery power and will consequently shorten standby time.Change your location to onewhere the network isaccessible, or temporarilyturn off your phone.You cannot switch your phone on.•Battery power has beendepleted. Recharge the phone's battery.SIM card error•SIM card malfunction ordamage. Take the SIM card to yournetwork operator for testing.•SIM card inserted improperly. Insert the SIM card properly.•Debris on the SIM cardcontacts. Use a soft, dry cloth to cleanthe SIM card contacts.Problem Possible cause Solution
Troubleshooting 97Unable to connect to the network.•SIM card invalid. Contact your network operator.•You are not within thenetwork's service area. Check the service area with your network operator.•Poor signal. Move to an open space, or if you are inside a building, move closer to a window.You cannot answer incoming calls.•You have activated theCall Barring feature. Go to Settings > Call Settings > Call Barring, and then select Cancel All.You cannot make outgoing calls.•You have activated theCall Barring feature. Go to Settings > Call Settings > Call Barring, and then select Cancel All.•You have activated the Fixed Dial Number feature.Go to Settings > Call Settings > Fixed Dial Number, and then select Off to turn off this feature.PIN Code is blocked.•You have entered an incorrect PIN code three consecutive times.Contact your network operator. If the network operator provides the SIM card's PUK code, use the PUK code to unlock the SIM card.Battery will not charge.•The battery or battery charger is damaged. Contact the dealer.•The phone's temperatureis below 0°C or higherthan 45°C.Adjust the battery charging environment to avoid extremes of temperature.•Poor contact between thebattery and charger. Check all connectors to make sure all connections have been properly made.Problem Possible cause Solution
98 TroubleshootingUnable to enter information into the Phone Book.•The Phone Book's memory is already full. Delete unnecessary data from the Phone Book.Unable to select certain features.•Your network operatordoes not support thesefeatures, or you have notapplied for services thatprovide these features.Contact your network operator.Problem Possible cause Solution

Navigation menu