8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 75047 |
| Application ID | 5XV0/lnCmd6+0UGV3dzpeA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.47kB (218373 bits) |
| Date Submitted | 1999-12-09 00:00:00 |
| Date Available | 1998-08-05 00:00:00 |
| Creation Date | 2001-05-11 10:20:18 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-11 10:20:19 |
| Document Title | 8 |
AcerView F50p LCD Color Monitor 15“ (38 1cm)LCD Panel Size User’s Manual AceR (l Copyright Copyright © 1998 by Acer Peripherals. incorporated All rights reserved No part ofthis publication may be reproduced, transmitted. transcribed‘ stored in a retrieval system or translated into any language or computer language in any form or by any means‘ electronic, mechanical, magnetic, optical. chemical, manual or otherwise, without the prior written permisston ofAcer Peripherals Incorporated Disclaimer Acer Peripherals, Incorporated makes no representations or warranties, either expressed or implied‘ with respect to the contents hereof and specifically disclaims any warranties merchantability or fitness For any particular purpose Further. Acer Peripherals, incorporated reserves the right to revise this publication and to make changes from time to time in the contents hereofwithout obligation ot'Acer Peripherals incorporated to notify any person of such revision or changes f mam/x For the convenience of service, write following related information ot'your monitor in the space below The serial number is on the back ofthe product. Monitor lnfomtation i Product Name AcerView FSO Serial Number“ tmMregmwitmtimmrtni xii-rusimrtml Olhcrbrsmlxund Frottummmumi Date of Purchase _ Dealer Information Dealer Telephone l Number: Address: _ l l‘cglclcrnl lmdml-Ifkb unhcw rupcctllc mmpflm: Safety Instructions u. The AC adapter isolates this equipment from the AC supply. Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning. Slots and openings in the cabinet and the back or top are urovtded for ventilation. They must not be blocked or covered This product should never be placed near or over a radiator or heat register‘ or in a built—in installation unless proper ventilation is provided This product should be operated from the type ofpower indicated on the marking label lfyou are not sure ofthe type ofpower available, consult your dealer or local pmxer company. This produc. should be operated with a 2—wire grounding~type ‘m plug. lfyou are unable to insert the plug’ into the outlet‘ contact your electrician to make the necessary outlet changes Never push objects ofany kind, or spill liquid ofany kind into this product. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks, lfany above mentioned misuse or other accident (dropping mis-operatians) occurs. contact qualified service personnel for servicing The power supply cord serves as a power disconnect device for pluggable equipment The socket outlet shall be installed near the equipment and shall be easily accessible; Table of Contents Table of Contents Chapter1 Introduction” Unpacking the Package , .. .. ........... ....... l-l Features 1-2 Power Management t., ... t., .. H ... 1-4 Chapter 2 Getting Started. , . . .. . . v . . ..-’i installing the Monitor 2-‘ Installing the Driver . 2-3 Chapter 3 Adjusting the Monitor 3-1 A Look at the Control Panel 3-1 Adjusting the Monitor. v _3»1 Panel Key lntmduction . v .. ...... . 3-l Makinfl Adjustments. . 3-i Brightness. . v ., 3»: Chapter 4 Troubleshooting and Useful Hints 4-1 Troubleshooting ., H. ., ,. .. ...., W, 4—1 Maintenance.” H v. H ........ . 4-2 Need More Help” t ., v . 4—3 Chapter 5 Spectfications.. v n .. N . . . 5—1 Introduction Unpacking the Package Check following items Ifthey are missing or damaged» consult your place ofpurchase immediately J LCD monitor with signal cable / User‘ 5 manual \/ Power cord & adapter _ / LCD VGA card / Five floppy disks Locale the model name and the serial number labeled at the bottom of your monitor base. The down the related information cfyour monitor and dealer in the space on page in For future reference. a M I hitmmictlou Features Your AcerView FSO has the following features 1 Power Saving Function The power management complies with VESA DPMS standard When the system is idle (off mode). the monitor automatically Cuts its power consumption to less than SW / Green Commitment Your monitor is packaged in recycled packing materials and no CFCs are used in the manufacturing process It is in compliance with the US government‘s Energy Star standards and the rigorous standards of the Scandinavian countries / Space Saving Compared with CRT monitors, the depth of your LCD monitor footprint is only l70mm‘ saving at least 50% ofyour desktop real estate / Light Weight Your monitor weights only 5 ZKg, 7594: lighter than traditional CRT monitors. J Lower Power Consumption Compared to the maximum 75W power consumption ot‘CR'l‘ monitors this monitor consumes only low in operationhypical) / Glare Free Your monitor has special design or'no glare. offering you comfortable working environment / Cosmetic Rear Design Different from bundles of cables for other monitors, the cosmetic rear design ofthis device hides all cords in its rear cover, offering you a neat desktop Wide Viewing Angle and High Brightness Your monitor can offer you wider viewing angle with 140° let‘. to right and 120° up to down Brightness offers 200 cd/m2 Both can let you enjoy the high qualified screen with great viewing angle High Contrast , Compared to 150 l in other LCD monitors‘ this model offers you 300 l which has better viewing effect it: l‘mdudion Power Management The power management compiies with VESA DPMS standard and the power saving modes. The power consumption at NORMAL and OFF modes are as follows Mod FPVC Monitor Adapter LED Recove e C input power ry time current consumptio Norm High < 08A < 20W Gree 0 sec 3] n OFF Low < 0.1A < SW Ambe 5 595 1“ (Monitor input voltage = 12V) ‘ 14 Km xii; Getting Started Installing the Monitor This monitor is equipped with an auto—sensing power supply for voltage ranges lOO~240V AC, 50~6OHL 1. Make sure that the system power is turned off 2 Remove the housing ofyour 7 1 I t PC. * 3. Remove the old VGA card and insert the LCD VGA card Tighten the screw when it’s set up 4 Replace the housing ofyeur PC < 5 Plug the signal cable to the til?“ signal connector of the VGA “ED‘E'°“'““'°3""’ 1m card at the rear of PC 6. Plug one end of power cord to the DC IN jack at the rear cf LCD monitor and the other end to the adapter. 2~1,- ‘Mmam ‘ ~ ,, We offer you two connectors on the VGA card. One is 75 pin D—sub connector for CRT monitor; the other one is Pane/Link P&D connector for LCD monitor pan/cularly. him“ w ' ‘ Installing the Driver rear-w Insert the ATI RAGE LT PRO Driver Installation disk 1 mm the floppy drive A ( or other proper drive ) From the Start menu. select Settings and choose Control Panel. Click Display icon and select Settings. From Change Display Type... select Adapter Type Select Change... and Have Disk... Click OK. lnscn ATl RAGE LT PRO Windows 95 Driver Disk 2 when you are prompted to insert the disk. Click OK Click Close to exit Display and select Yes to restart computer. ' /f a Version Conflict dialog box pops up to ask you ”if you want to keep the file?”, choose No. ~ For Windows 3.1, Win NT 351 or Win NT 4.0 users, please choose the appropriate installation disk, iii-34.3 seating Elma Adjusting the Monitor A Look at the Control Panel Sgt-er. m Maw ma sum Adjusting the Monitor You can adjust the monitor with the adiustmem keys of Brightness to make necessary settings Panel Key Introduction Z‘i': Brightness adjusts the brightness ofthe LCD monitor Making Adjustment Except brightness all ofthe settings we frequently make on the CRT monitor are standardized and fixed on the VGA card Please follow instructions below to make your favorite setting. in j‘wmmm‘ ' Brightness This Display Control adjusts the brightness ofthe screen display Turn to the left to increase the brightness ofthe display and the right 10 decrease it. 34 I wumwm ' Troubleshooting and Useful Hints Troubleshooting Make sure that your monitor is properly installed ifyou have encountered any trouble using this product (For hardware installation see Chapter 2, Getting Started) Ifthc problems persist, check this chaprer for possible solutions / There is no picture on the screen Check: Cl LCD’S video signal, The LCD’S video signal must be specified for the monitor. 3 Power saving mode Press any key and move the mouse to deactivate the mode. D Signal cable connector pins. It‘there are bent or missing pins‘ consult your place ofpurchase CI Scanning frequency. Reboot the system again ~/ The picture is unstable. Check: C1 Signal connector pin assignments Replace with a correct one if they are not operative Cl Signal cable connector pins lfthere are bent or missing pins, consult your place of purchase Graphics card See ifthe settings are made properly DD Scanning frequency. El Reboot the system again / Characters look too dark or too light. Cl Adjust related settings, See Chapter 3, Adjusting the Monitor. Maintenance 3: Do not expose the monitor to direct sunlight or heat Do not spill liquid on the monitor Do not attempt to open the monitor. You may be hurt by electric shock. For service call your place ofpm‘chase. Do not use your monitor when magnets or electronic producrs are operating nearby Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen Wipe it with clean sofi clothes applied with mild solution. Do not place anything on your monitor Bad ventilation may elevate temperature in the monitor Need More Help? lfyour problems remain afler checking this manual, please contact your place of purchase or e-mail us at stevenleung@api.com tw Specifications LCD Panel 15.0”, TFT Power Supply ' (Universal) 90~264 V AC 47~63 Hz Input voltage INK/(typical) Power consumption Max. Resolution 1024 x 768 Video Input PanelLink P&D Connector User’s Control Power ON/OFF, Brightness Regulatory UL, CSA‘ FCC-B. TUV/Ergonomics, Compliance VCCL CE, Gtick, DN.S.F., TC095(optional) Display Area 304mm (H) x 228mm (V) Interface Card ATI RAGE LT PRO chip set‘ 324m PC! bus interface, CRT and PanelLink P&D connector, 64K video ROM BlOS‘ 4 MB SGRAM, 64-bit windows acceleralion Ambient Temperature Operating +5°C ~ +40°C / +41°F ~ +104°F Stcrage 40°C ~ “450°C / -4°F ~ +140°F Humidity iii-thaw" ‘ Am} Operating 20% N 85% Storage lO% ~~ 85% Dimensions (W x H x 386 mm (W) x 360 mm (H) x 170 mm (D) 0) Weight (net) Less than SAZKg "$st ~,
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:05:11 10:20:18 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:05:11 10:20:19-04:00 Page Count : 19EXIF Metadata provided by EXIF.tools