Benq AWL300 Wireless LAN USB Adapter User Manual 7

Download:
Mirror Download [FCC.gov]
Document ID	242814
Application ID	ZLeHSc56AZZn5nHZW/ilWg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.35kB (429332 bits)
Date Submitted	2002-05-14 00:00:00
Date Available	2002-05-14 00:00:00
Creation Date	2002-04-25 18:21:13
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2002-04-25 18:21:26
Document Title	掃描-7.PDF
Document Creator	掃描
Document Author:	ivy

Benq Wireless LAN USB Adapter
AWL300
User Manual
Version 1.0 – 2002
Benq Wireless LAN
Contents
Contents .......................................................................................................................... i
1. Installation..................................................................................................................1
1.1 Driver Installation....................................................................................1
1.2 Application Installation............................................................................3
1.3 Application & USB Driver Installation ...................................................7
2. Uninstallation...........................................................................................................13
3. Configuration & Monitor Utility .............................................................................16
3.1 Monitor...................................................................................................16
3.2 Statistics .................................................................................................18
3.3 Site Survey.............................................................................................19
3.4 Encryption..............................................................................................20
3.5 Advanced ...............................................................................................21
3.6 Version ...................................................................................................22
AWL300 USB Adapter User Manual
Benq Wireless LAN
1. Installation
1.1 Driver Installation
Insert AWL300 USB Adapter into your PC, and then Windows will show the dialog –
‘Add New Hardware Wizard’.
Select ‘Specify the location of the driver’ and press Next button.
AWL300 USB Adapter User Manual
Benq Wireless LAN
Select ‘Specify a location’ and browse the Benq Wireless LAN CD to find AWL300.
For example, if your CD-ROM is drive D, the location is D:\AWL300.
Windows has found Benq AWL300 Wireless LAN USB Adapter. Press Next button.
Please wait while coping files.
AWL300 USB Adapter User Manual
Benq Wireless LAN
Press Finish.
Press Yes and restart your computer.
1.2 Application Installation
Execute Setup.exe in the AWL300 directory in Be nq Wireless LAN CD. For example,
if your CD-ROM is drive D, please execute D:\AWL300\Setup.exe.
AWL300 USB Adapter User Manual
Benq Wireless LAN
Press Next button
Select ‘Application & USB Drivers’ to install both of them if you don’t have USB
Drivers installed yet. Select ‘Application Only’ to install only AWL300 applications.
AWL300 USB Adapter User Manual
Benq Wireless LAN
Press Browse if you want to change destination location of applications, and then
press Next button.
The folder name will be AWL300. Press Next button if you don’t want to change it.
AWL300 USB Adapter User Manual
Benq Wireless LAN
Press Next button.
Press Finish and restart your computer.
AWL300 USB Adapter User Manual
Benq Wireless LAN
1.3 Application & USB Driver Installation
Execute Setup.exe in the AWL300 directory in Benq Wireless LAN CD. For example,
if your CD-ROM is drive D, please execute D:\AWL300\Setup.exe.
Press Next button
AWL300 USB Adapter User Manual
Benq Wireless LAN
Select ‘Application & USB Drivers’ to install both of them if you don’t have USB
Drivers installed yet.
Press Next button
Press Next button
AWL300 USB Adapter User Manual
Benq Wireless LAN
Press Next button
Select the operating mode and then press Next button
AWL300 USB Adapter User Manual
Benq Wireless LAN
Specify ESSID and then press Next button
Press Next button
AWL300 USB Adapter User Manual
10
Benq Wireless LAN
Press Finish and restart your computer.
AWL300 USB Adapter User Manual
11
Benq Wireless LAN
After complete installation, you will get the following screen.
AWL300 USB Adapter User Manual
12
Benq Wireless LAN
2. Uninstallation
To uninstall AWL300, you can run the “Uninstall Configuration & Monitor Utility” as
the following figure.
Press OK if yo u really want to remove AWL300.
AWL300 USB Adapter User Manual
13
Benq Wireless LAN
Press OK when uninstall successfully completed.
You must restart your computer. Press OK to do it.
AWL300 USB Adapter User Manual
14
Benq Wireless LAN
You can also remove AWL300 from Add/Remove Programs Properties in Control
Panel
AWL300 USB Adapter User Manual
15
Benq Wireless LAN
3. Configuration & Monitor Utility
3.1 Monitor
Operating Mode
Infrastructure Mode
In this mode, the driver will scan all available channels continuously until one or
more Access Points which matches its SSID are found. When it gets to that point, it
will try to authenticate and associate with the Access Point.
Ad Hoc Mode
In this mode, the driver will scan for 5 seconds to look for an existing Ad Hoc
network which uses the same SSID.
Channel
This field shows the current radio channel used for an active connection.
AWL300 USB Adapter User Manual
16
Benq Wireless LAN
SSID
Service Set Identity
Tx Rate
This field shows the current transmit rate which are being used for an active
connection.
Power Mgmt Mode
Power Management Mode – Active or Power Save
MAC Address
MAC Address of this USB Wireless LAN Adapter
Status
The current state of the driver is displayed in this field. If the state reveals
“Associated,“ it means that the normal flow of operation is in Infrastructure mode.
This shows that the PC is already connected to access point and BSSID is also shown
in the form of hex digits. At the same time, the networking is available for the device.
In “Scanning ” state, it means that the node can not detect the SSID to get an access
point within range and is searching for an available access point. Also, if the driver
failed to initialize for some unknown reasons, this field will display an error message.
Link Quality
This field reveals the quality of the current connection. Only when the node is in
Infrastructure Mode does the Link Quality bar graph become active. The bar graph
displays the link quality between the node and its Access Point.
Signal Strength
Only when the node is in Infrastructure Mode does the Signal Strength bar graph
become active. This bar graph shows normalized signal strength as reported by the
radio, averaged over all fr ames over 100 bytes long which are received from the
Access Point.
AWL300 USB Adapter User Manual
17
Benq Wireless LAN
3.2 Statistics
The Statistics Page shows the counts of packets transmitted and received. Press Clear
button to set these numbers to zero.
AWL300 USB Adapter User Manual
18
Benq Wireless LAN
3.3 Site Survey
The Site Survey Page shows the APs nearby. Press Re-Scan button to search APs
nearby.
AWL300 USB Adapter User Manual
19
Benq Wireless LAN
3.4 Encryption
According to WEP function select, this panel allows the entry of 64-bit encryption
and 128-bit key. Each key must consist of hex digits to be written to the driver and
registry. This means that only digit 0-9 and letters A-F are valid entries. Therefore, if
entered incorrectly, the program will not write keys to a driver.
Encryption
Disabled – Disable WEP function
64 Bit – Enable WEP with 64 bit Key
128 Bit – Enable WEP with 128 bit Key
WEP Key to use
Select one of these four keys.
WEP Mode
Select WEP mode – Mandatory or Optinal
AWL300 USB Adapter User Manual
20
Benq Wireless LAN
Authentication Type
Select Open System type or Shared Key type
3.5 Advanced
The Advanced Page sets the preamble type and threshold of fragmentation and
RTS/CTS. Press Submit button to apply your changes
AWL300 USB Adapter User Manual
21
Benq Wireless LAN
3.6 Version
You may learn the product version including the detail of Driver, Firmware, and
Application from this “About” tab. When users want to report their problems to
technical support, they must use this version number.
AWL300 USB Adapter User Manual
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:04:25 18:21:26+08:00
Create Date                     : 2002:04:25 18:21:13+08:00
Title                           : 掃描-7.PDF
Author                          : ivy
Creator                         : 掃描
Producer                        : Acrobat PDFWriter 4.0 for Windows
Page Count                      : 24
Mod Date                        : 2002:04:25 18:21:26+08:00
Creation Date                   : 2002:04:25 18:21:13+08:00
Metadata Date                   : 2002:04:25 18:21:26+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools