Benq H0922 Single Mode Cellular Phone (CDMA) User Manual C600

Benq Corporation Single Mode Cellular Phone (CDMA) C600

Users Manual

Copyright © 2002 by BenQ Corporation. All rights reserved. No partof this publication may be reproduced, transmitted, transcribed,stored in a retrieval system or translated into any language or com-puter language, in any form or by any means, electronic, mechanical,magnetic, optical, chemical, manual or otherwise, without the priorwritten permission of BenQ Corporation.BenQ Corporation makes no representations or warranties, eitherexpressed or implied, with respect to the contents hereof and specifi-cally disclaims any warranties, merchantability or fitness for any partic-ular purpose. Further, BenQ Corporation reserves the right to revisethis publication and to make changes from time to time in the con-tents hereof without obligation of BenQ Corporation to notify anyperson of such revision or changes.In August 1986 the Federal Communications Commission (FCC) ofthe United States with its action in Report and Outer FCC 96-326adopted an updated safety standard for human exposure to radio fre-quency (RF) electromagnetic energy emitted by FCC regulated trans-mitters. Those guidelines are consistent with the safety standardpreviously set by both U.S. and international standards bodies. Thedesign of this phone complies with the FCC guidelines and theseinternational standards.Use only the supplied or an approved antenna. Unauthorized anten-nas, modifications, or attachments could impair call quality, damagethe phone, or result in violation of FCC regulations.Do not use the phone with a damaged antenna. If a damaged antennacomes into contact with the skin, a minor burn may result. Pleasecontact your local dealer for replacement antenna.DisclaimerCopyrightFCC RF EXPOSURE INFORMATIONWarning! Read this information before using yourphone
Body-worn OperationThis device was tested for typical body-worn operations with theback of the phone kept 0.6 inches (1.5cm) from the body. To complywith FCC RF exposure requirements, a minimum separation distanceof 0.6 inches (1.5cm) must be maintained between the user's body andthe back of the phone, including the antenna, whether extended orretracted. Third-party belt-clips, holsters and similar accessories con-taining metallic components shall not be used. Body-worn accessoriesthat cannot maintain 0.6 inch (1.5cm) separation distance between theuser’s body and the back of the phone, and have not been tested fortypical body-worn operations may not comply with FCC RF exposurelimits and should be avoided.For more information about RF exposure, please visit the FCC web-site at www.fcc.govYour wireless handheld portable telephone is a low power radiotransmitter and receiver. When it is ON, it receives and also sendsout radio frequency (RF) signals.In August, 1996, the Federal Communications Commissions (FCC)adopted RF exposure guidelines with safety levels for hand-held wire-less phones. Those guidelines are consistent with the safety standardspreviously set by both U.S. and international standards bodies:ANSIC95.1 (1992)'NCRP Report 86 (1986)ICIMIRP(1996)Those standards were based on comprehensive and periodic evalua-tions of the relevant scientific literature. For example, over 120 scien-tists, engineers, and physicians from universities, government healthagencies, and industry reviewed the available body of research todevelop the ANSI Standard (C95.1). Nevertheless, we recommendthat you use a handsfree kit with your phone (such as an earpiece orheadset) to avoid potential exposure to RF energy.Exposure to radio frequency signals
The design of your phone complies with the FCC guidelines (andthose standards).Use only the supplied or an approved replacement antenna. Unautho-rized antennas, modifications, or attachments could damage thephone and may violate FCC regulations.NORMAL POSITION: Hold the phone as you would any other tele-phone with the antenna pointedup and over your shoulder.TIPS ON EFFICIENT OPERATION: For your phone to operate mostefficiently:• Extend your antenna fully.• Do not touch the antenna unnecessarily when the phone is in use.Contact with the antenna affects call quality and may cause thephone to operate at a higher power level than otherwise needed.Check the laws and regulations on the use of wireless telephones inthe areas where you drive. Always obey them. Also, if using yourphone while driving, please:• Give full attention to driving - driving safely is your first responsibil-ity;• Use hands-free operation, if available;• Pull off the road and park before making or answering a call if drivingconditions so require.Most modern electronic equipment is shielded from RF signals. How-ever, certain electronic equipment may not be shielded against the RFsignals from your wireless phone.PacemakersThe Health Industry Manufacturers Association recommends that aminimum separation of six (6") inches be maintained between a hand-Antenna carePhone operationDrivingElectronic devices
held wireless phone and a pacemaker to avoid potential interferencewith the pacemaker. These recommendations are consistent with theindependent research by and recommendations of Wireless Technol-ogy Research.Persons with pacemakers:• Should ALWAYS keep the phone more than six inches from theirpacemaker when the phone is turned ON;• Should not carry the phone in a breast pocket;• Should use the ear opposite the pacemaker to minimize the poten-tial for interference.• If you have any reason to suspect that interference is taking place,turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. Inthe event of such interference, you may want to consult your serviceprovider or call the customer service line to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufac-turer of your device to determine if they are adequately shielded fromexternal RF energy. Your physician may be able to assist you in obtain-ing this information.Turn your phone OFF in health care facilities when any regulationsposted in these areas instruct you to do so. Hospitals or health carefacilities may be using equipment that could be sensitive to externalRF energy.VehiclesRF signals may affect improperly installed or inadequately shieldedelectronic systems in motor vehicles. Check with the manufacturer orits representative regarding your vehicle. You should also consult themanufacturer of any equipment that has been added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where posted notices require youto do so.
FCC regulations prohibit using your phone while in the air. SwitchOFF your phone before boarding an aircraft.To avoid interfering with blasting operations, turn your phone OFFwhen in a "blasting area" or in areas posted: "Turn off two-way radio".Obey all signs and instructions.Turn your phone OFF when in any area with a potentially explosiveatmosphere and obey all signs and instructions. Sparks in such areascould cause an explosion or fire resulting in bodily injury or evendeath.Areas with a potentially explosive atmosphere are often but notalways clearly marked. They include fueling areas such as gasoline sta-tions; below deck on boats; fuel or chemical transfer or storage facili-ties; vehicles using liquefied petroleum gas (such as propane orbutane); areas where the air contains chemicals or particles, such asgrain, dust, or metal powders; and any other area where you wouldnormally be advised to turn off your vehicle engine.For Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT place objects, includingboth installed or portable wireless equipment, in the area over the airbag or in the air bag deployment area.If in-vehicle wireless equipment is improperly installed and the air baginflates, serious injury could result.AircraftBlasting areasPotentially explosive atmospheresFDA Consumer Update on Mobile Phones
FDA has been receiving inquiries about the safety of mobile phones,including cellular phones and PCS phones. The following summarizeswhat is known--and what remains unknown--about whether theseproducts can pose a hazard to health, and what can be done to mini-mize any potential risk. This information may be used to respond toquestions.Why the concern?Mobile phones emit low levels of radio frequency energy (i.e., radiofrequency radiation) in the microwave range while being used. Theyalso emit very low levels of radio frequency energy (RF), considerednon-significant, when in the stand-by mode. It is well known that highlevels of RF can produce biological damage through heating effects(this is how your microwave oven is able to cook food). However, itis not known whether, to what extent, or through what mechanism,lower levels of RF might cause adverse health effects as well. Althoughsome research has been done to address these questions, no clearpicture of the biological effects of this type of radiation has emergedto date. Thus, the available science does not allow us to conclude thatmobile phones are absolutely safe, or that they are unsafe. However,the available scientific evidence does not demonstrate any adversehealth effects associated with the use of mobile phones.What kinds of phones are in question?Questions have been raised about hand-held mobile phones, the kindthat have a built-in antenna that is positioned close to the user's headduring normal telephone conversation. These types of mobile phonesare of concern because of the short distance between the phone'santenna--the primary source of the RF--and the person's head. Theexposure to RF from mobile phones in which the antenna is located atgreater distances from the user (on the outside of a car, for example)is drastically lower than that from hand-held phones, because a per-son's RF exposure decreases rapidly with distance from the source.The safety of so-called "cordless phones," which have a base unit con-nected to the telephone wiring in a house and which operate at farlower power levels and frequencies, has not been questioned.How much evidence is there that hand-held mobile phonesmight be harmful?
Briefly, there is not enough evidence to know for sure, either way;however, research efforts are on-going.The existing scientific evidence is conflicting and many of the studiesthat have been done to date have suffered from flaws in their researchmethods. Animal experiments investigating the effects of RF expo-sures characteristic of mobile phones have yielded conflicting results.A few animal studies, however, have suggested that low levels of RFcould accelerate the development of cancer in laboratory animals. Inone study, mice genetically altered to be predisposed to developingone type of cancer developed more than twice as many such cancerswhen they were exposed to RF energy compared to controls. Thereis much uncertainty among scientists about whether results obtainedfrom animal studies apply to the use of mobile phones. First, it isuncertain how to apply the results obtained in rats and mice tohumans. Second, many of the studies that showed increased tumordevelopment used animals that had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RFvirtually continuously--up to 22 hours per day.For the past five years in the United States, the mobile phone industryhas supported research into the safety of mobile phones. Thisresearch has resulted in two findings in particular that merit additionalstudy:In a hospital-based, case-control study, researchers looked for anassociation between mobile phone use and either glioma (a type ofbrain cancer) or acoustic neuroma (a benign tumor of the nervesheath). No statistically significant association was found betweenmobile phone use and acoustic neuroma. There was also no asso-ciation between mobile phone use and gliomas when all types oftypes of gliomas were considered together. It should be noted thatthe average length of mobile phone exposure in this study was lessthan three years. When 20 types of glioma were considered separately, however, anassociation was found between mobile phone use and one raretype of glioma, neuroepithelliomatous tumors. It is possible withmultiple comparisons of the same sample that this associationoccurred by chance. Moreover, the risk did not increase with howoften the mobile phone was used, or the length of the calls. In fact,the risk actually decreased with cumulative hours of mobile phoneuse. Most cancer causing agents increase risk with increased expo-sure. An ongoing study of brain cancers by the National Cancer
Institute is expected to bear on the accuracy and repeatability ofthese results.1 Researchers conducted a large battery of laboratory tests toassess the effects of exposure to mobile phone RF on geneticmaterial. These included tests for several kinds of abnormalities,including mutations, chromosomal aberrations, DNA strandbreaks, and structural changes in the genetic material of bloodcells called lymphocytes. None of the tests showed any effect ofthe RF except for the micronucleus assay, which detects structuraleffects on the genetic material. The cells in this assay showedchanges after exposure to simulated cell phone radiation, but onlyafter 24 hours of exposure. It is possible that exposing the testcells to radiation for this long resulted in heating. Since this assay isknown to be sensitive to heating, heat alone could have caused theabnormalities to occur. The data already in the literature on theresponse of the micronucleus assay to RF are conflicting. Thus, fol-low-up research is necessary.2 FDA is currently working with government, industry, and aca-demic groups to ensure the proper follow-up to these industry-funded research findings. Collaboration with the Cellular Tele-communications and Internet Association (CTIA) in particular isexpected to lead to FDA providing research recommendationsand scientific oversight of new CTIA-funded research based onsuch recommendations.Two other studies of interest have been reported recently in theliterature:Two groups of 18 people were exposed to simulated mobilephone signals under laboratory conditions while they performedcognitive function tests. There were no changes in the subjects'ability to recall words, numbers, or pictures, or in their spatialmemory, but they were able to make choices more quickly in onevisual test when they were exposed to simulated mobile phonesignals. This was the only change noted among more than 20 vari-ables compared.3 In a study of 209 brain tumor cases and 425 matched controls,there was no increased risk of brain tumors associated withmobile phone use. When tumors did exist in certain locations,however, they were more likely to be on the side of the head
where the mobile phone was used. Because this occurred in only asmall number of cases, the increased likelihood was too small tobe statistically significant.4 In summary, we do not have enough information at this point toassure the public that there are, or are not, any low incident healthproblems associated with use of mobile phones. FDA continues towork with all parties, including other federal agencies and industry, toassure that research is undertaken to provide the necessary answersto the outstanding questions about the safety of mobile phones.What is known about cases of human cancer that have beenreported in users of hand-held mobile phones?Some people who have used mobile phones have been diagnosed withbrain cancer. But it is important to understand that this type of canceralso occurs among people who have not used mobile phones. In fact,brain cancer occurs in the U.S. population at a rate of about 6 newcases per 100,000 people each year. At that rate, assuming 80 millionusers of mobile phones (a number increasing at a rate of about 1 mil-lion per month), about 4800 cases of brain cancer would be expectedeach year among those 80 million people, whether or not they usedtheir phones. Thus it is not possible to tell whether any individual'scancer arose because of the phone, or whether it would have hap-pened anyway. A key question is whether the risk of getting a particu-lar form of cancer is greater among people who use mobile phonesthan among the rest of the population. One way to answer that ques-tion is to compare the usage of mobile phones among people withbrain cancer with the use of mobile phones among appropriatelymatched people without brain cancer. This is called a case-controlstudy. The current case-control study of brain cancers by the NationalCancer Institute, as well as the follow-up research to be sponsored byindustry, will begin to generate this type of information.What is FDA's role concerning the safety of mobile phones?Under the law, FDA does not review the safety of radiation-emittingconsumer products such as mobile phones before marketing, as itdoes with new drugs or medical devices. However, the agency hasauthority to take action if mobile phones are shown to emit radiationat a level that is hazardous to the user. In such a case, FDA couldrequire the manufacturers of mobile phones to notify users of the
health hazard and to repair, replace or recall the phones so that thehazard no longer exists.Although the existing scientific data does not justify FDA regulatoryactions at this time, FDA has urged the mobile phone industry to takea number of steps to assure public safety. The agency has recom-mended that the industry:• support needed research into possible biological effects of RF of the type emitted by mobile phones; • design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function ; and • cooperate in providing mobile phone users with the best possi-ble information on what is known about possible effects of mobile phone use on human health. At the same time, FDA belongs to an interagency working group ofthe federal agencies that have responsibility for different aspects ofmobile phone safety to ensure a coordinated effort at the federallevel. These agencies are:• National Institute for Occupational Safety and Health • Environmental Protection Agency • Federal Communications Commission • Occupational Health and Safety Administration • National Telecommunications and Information AdministrationThe National Institutes of Health also participates in this group.In the absence of conclusive information about any possible risk, whatcan concerned individuals do?If there is a risk from these products--and at this point we do notknow that there is--it is probably very small. But if people are con-cerned about avoiding even potential risks, there are simple steps theycan take to do so. For example, time is a key factor in how muchexposure a person receives. Those persons who spend long periodsof time on their hand-held mobile phones could consider holdinglengthy conversations on conventional phones and reserving the hand-held models for shorter conversations or for situations when othertypes of phones are not available.People who must conduct extended conversations in their cars everyday could switch to a type of mobile phone that places more distancebetween their bodies and the source of the RF, since the exposure
level drops off dramatically with distance. For example, they couldswitch to:• a mobile phone in which the antenna is located outside the vehicle, • a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or • a headset with a remote antenna to a mobile phone carried at the waist. Again, the scientific data does not demonstrate that mobile phonesare harmful. But if people are concerned about the radiofrequencyenergy from these products, taking the simple precautions outlinedabove can reduce any possible risk.Where can I find additional information?For additional information, see the following websites:Federal Communications Commission (FCC) RF Safety Program(select "Information on Human Exposure to RF Fields from Cellularand PCS Radio Transmitters"): http://www.fcc.gov/oet/rfsafety World Health Organization (WHO) International Commission onNon-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk 1. Muscat et al. Epidemiological Study of Cellular Telephone Use andMalignant Brain Tumors. In: State of the Science Symposium;1999 June20; Long Beach, California.2. Tice et al. Tests of mobile phone signals for activity in genotoxicityand other laboratory assays. In: Annual Meeting of the EnvironmentalMutagen Society; March 29, 1999, Washington, D.C.; and personalcommunication, unpublished results.3. Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E,and Varey, A. Effect of a 915-MHz simulated mobile phone signal oncognitive function in man. Int. J. Radiat. Biol., April 8, 1999.
4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use ofcellular telephones and the risk for brain tumors: a case-control study.Int. J. Oncol., 15: 113-116, 1999.                                !!!!4,901,307 5,490,165 5,056,109 5,504,773 5,101,5015,506,865 5,109,390 5,511,073 5,228,054 5,535,2395,267,261 5,544,196 5,267,262 5,568,483 5,337,3385,600,754 5,414,796 5,657,420 5,416,797 5,6595695,710,784 5,778,38License note
 Table of CotentsChapter 0: Quick Start ........................................ 1Chapter 1: Introduction to Your Phone ............ 5Your Phone ........................................................................6Appearance ........................................................................7Chapter 2: Using Your Phone ............................. 15Basic Operations ..............................................................16Turning on the phone .................................................................. 16Turning off the phone .................................................................. 16Making a call ................................................................................... 16Time pause ..................................................................................... 17Redialing a call ............................................................................... 18Answering a call ............................................................................ 18Ending a call .................................................................................... 18In call options ................................................................................. 18Call waiting ..................................................................................... 19Three way call ............................................................................... 19Speed dial ........................................................................................ 19OTASP call ..................................................................................... 20Call logs ........................................................................................... 20Reading messages .......................................................................... 21Call forward ................................................................................... 21Adjust ear piece volume ............................................................. 21Knowing What Your Phone Says .................................22Low battery warning .................................................................... 22Battery charging ............................................................................ 22Missed call alert ............................................................................. 22Roaming alert ................................................................................. 22Power saving .................................................................................. 22Chapter 3: Menu Options .................................... 23Phone Book Menu ............................................................25
 Table of CotentsCall Logs Menu ..................................................................28Call logs ........................................................................................... 28Messages Menu .................................................................29Inbox ................................................................................................ 29Compose ........................................................................................ 29Outbox ............................................................................................ 29Quick Msg ....................................................................................... 29Draft ................................................................................................ 29Voice mail ....................................................................................... 30Web Msg ......................................................................................... 30Broadcasts ...................................................................................... 30Msg Setting ..................................................................................... 30Erase All .......................................................................................... 30Chat Room ..................................................................................... 31Email ................................................................................................. 31Tools Menu ........................................................................35Browser .......................................................................................... 35Alarm clock .................................................................................... 37Calculator ....................................................................................... 38Scheduler ........................................................................................ 39Games .............................................................................................. 41Hour Reminder ............................................................................. 43Currency Converter .................................................................... 43World time .................................................................................... 43Stopwatch ....................................................................................... 43Quick Key ....................................................................................... 44Scratch pad ..................................................................................... 44Download ....................................................................................... 44Settings Menu ....................................................................45Date/Time ...................................................................................... 45Screen Saver .................................................................................. 46Backlight .......................................................................................... 46LCD Contrast ................................................................................ 47
 Table of CotentsLanguage .......................................................................................... 47Answer By ...................................................................................... 48Auto Redial .................................................................................... 48Restore Default Value ................................................................. 49Call Srvcs Menu ................................................................50Limit Alert ...................................................................................... 50Force Mode .................................................................................... 50NAM Select .................................................................................... 50System Select ................................................................................. 51Data Service ................................................................................... 51Voice Privacy .................................................................................. 51Phone Activation ........................................................................... 51Audio Menu .......................................................................52Profiles ............................................................................................. 52System Alert .................................................................................. 52DTMF Mute .................................................................................... 52MelodyEditor ................................................................................. 52Security Menu ....................................................................53Lock Status ..................................................................................... 53Change code .................................................................................. 53Call restrict .................................................................................... 54Emergency number ...................................................................... 54Chapter 4: Care and Maintenance ...................... 55Chapter 5: Troubleshooting ................................ 57
 Table of Cotents"#"#"#"#
Chapter 0: Quick Start
BenQ C600 Mobile PhonePlease follow the simple steps below to make your first call:Install the batteryPlace the bottom end of the battery on the phone, then press down the top side of the battery. You will hear a click when the battery is secured..Remove the batteryPress the battery latch and the battery rises automatically. Then, liftthe battery off the compartment as illustrated below.Charge the batteryInsert the battery charger connector into the battery charging socket. PUSHThis side up
BenQ C600 Mobile Phone    Turn the phone onAfter the battery is fully charged, press and hold key to turn onthe phone power. The phone beeps and a welcome animation will bedisplayed on the screen. After the phone is turned on, it will startsearching the network to use. Make a callEnter the phone number with the keys on the keypad. When finished,press key.End a callPress key to end the call. Please set up the time for your phone first to ensure accuracy of time-related data (such as Calendar and Scheduler). Please see “Set Time” onpage 46.PUSH
BenQ C600 Mobile Phone<Memo>
Chapter 1: Introduction to Your Phone
BenQ C600 Mobile PhoneYour PhoneThank you for choosing BenQ mobile phone!From now on, with your mobile phone, you will experience totalmobility in your life. You will be able to communicate with morefreedom and convenience. We know that you demand more than what a mobile phone can offerfor mobility. The light-weight, slim body of your phone symbolizesyour taste for elegance and compactness. The high-resolution LCDdisplay frees you from the nightmare of groping between pixels. Yousee clearly each and every character displayed on the screen. There are more features to discover. Now please follow us while weintroduce you to your new and versatile partner.* The data service kit is required for data and fax service that can be purchasedseparately.
BenQ C600 Mobile PhoneAppearanceFront ViewRear View (With battery removed)
BenQ C600 Mobile PhoneBottom View&
BenQ C600 Mobile PhoneThere are several icons that appear on the LCD screen to indicate thestatus of your phone. Please see the table below for the meaning ofeach icon:Icon Meaning Signal strengthShows current signal strength. The morebars displayed, the better the signalstrength.MessageSteady: Indicates that there are new andunread text or voice messages.Blinking: Indicates that there are newunread urgent messages.RoamingSteady: Indicates that this phone is outof the reach of its primary service area,but is in a friendly roaming area.Blinking: Indicates that the phone iscurrently in an unfriendly roaming areaDigital modeThis icon appears when the phone is indigital mode.Call statusWhen you are in a call with your phoneor there is an incoming call, this icon willappear.No serviceThis icon indicates that the phone cannotreceive a signal from the networkoperator.Battery levelThe battery level is shown by the numberof bars in the battery icon. The more barsdisplayed, the higher the battery strength.This icon will flash when the battery isextremely low. When you charge the battery, the barswill animate until the battery is fullycharged.LCD Screen2002-09-10Fri 11:50Menu Book
BenQ C600 Mobile PhoneRing typeDisplays the ring type when your phonereceives an incoming call:: the phone generates a ring tonewhen there is an incoming call. : indicates that the phone is insilent mode and the phonevibrates when there is an incoming call. :the phone rings and vibrateswhen there is an incoming call.
BenQ C600 Mobile PhoneThere are two kinds of keys on the keypad: Function Keys andAlphanumeric Keys. In each section below, "long press" a keymeans "press and hold a key for about 2 seconds", while "press" a keymeans "press and release a key immediately".In standby mode, when you press a key on the keypad, the backlightwill be turned on automatically. If you want to turn off the backlight,please refer to “Backlight” on page 47 for details. Press... To...End/Powerkey• End a call.• Exit the menu and return tostandby mode.• Turn the phone power on/off.Send/OKkey• Make an outgoing call.• Answer an incoming call.• Enter call log.ScrollKey• Move cursor left.• Move to the previous itemin Main Menu.• Enter Qkey List.• Move cursor right.• Move to the next item inMain Menu.• Enter Phone Book.Left soft key Execute the function that is shownat the lower left part of the screen.Right soft key Execute the function that is shownat the lower right part of the screen.Clear key• Clear text.• Delete.Keypad Function Keys
BenQ C600 Mobile PhoneThere are 12 alphanumeric keys on the keypad. You can use thesekeys to enter numbers and letters. To enter a number, simply pressthe button with that number. To enter characters, press the keyseveral times until the desired letter appears. To switch betweenupper and lower cases, press the key. On the other hand, toswitch between numbers and letters, press the “Option” key. Please see the table below for the keys and their correspondingletters: Key Letters Alphanumeric KeysSpace, 1A, B, C, 2D, E, F, 3 G, H, I, 4J, K, L, 5M, N, O, 6P, Q, R, S, 7W, X, Y, Z, 90Symbol table, if inputting symbols is allowed.Change character cases.T, U, V, 8
BenQ C600 Mobile PhoneKey OperationsIn standby mode:In Main Menu:Key Press Long PressRight softkey Phonebook NoneLeft softkey Menu NoneSend Outgoing call logs Redial Last NumberEnd None Power OffUp Qkey List NoneDown List phonebookrecordsNoneClear None List Audio Profiles**None##Wap1 ~ 9 1 ~ 9 Speed dialing0 0 Call to voice mailKey Press Long PressRight softkey Right softkey NoneLeft softkey Left softkey NoneSend None NoneEnd Back to standby mode Back to previous pagethen power offUp Up NoneDown Down NoneClear Back to previous page Back to previous page* None None# None None1 ~ 9 Shortcut to item 1~9 None0 None None
BenQ C600 Mobile PhoneInputting dataYour phone provides two input methods for you to input various datainto your phone using the keys on the keypad. You can select thedesired one in the settings menu.Multi-tap Text input methodWhen you have entered the first letter, the cursor will advance to theposition of the next letter after about two seconds. You can also typeto enter the next letter directly. To clear a letter or number, press key. The cursor will movebackward and the letter will be deleted. To delete all letters ornumbers, long press key.For example, if you want to enter "Mary":• Press key once until “M” displays on the screen.• Press key, then press key until “a” appears on thescreen.• Press key three times until “r” appears on the screen.• Press key three times until “y” appears on the screen. • Finally, press the soft key to confirm.
Chapter 2: Using Your Phone
BenQ C600 Mobile PhoneBasic OperationsWhen the phone power is off, you can long press key to turn iton. The phone beeps with a piece of music and a welcome animationwill appear on the screen. After the phone is turned on, it will startsearching for the network to use. When network service is acquired, the banner will be displayed onthe screen. Under this "standby" mode, you can:• Make a call.• Press the “Menu” soft key to access Main Menu.(See “Chapter3: Menu Options” on page 23)• Press the “Book” soft key to enter the Phone Book. (See“Phone Book Menu” on page 25 )• Long press the key to listen to the voice mail message.• If you have activated the Lock Phone/Power On function, the phone will belocked and you will need to enter the lock code to unlock it.When the phone power is on, you can long press key to turn itoff.In standby mode, you can make a call in one of the following ways:• Key in the phone number, then press key.• Press key to browse the last dialed numbers list, then press key again to dial.• Long press key to redial the last dialed number.• Find a Phone Book record by name and press key.• Long press ~ key to use speed dial.• From "Outgoing Call" log, choose a number to dial and press key.Turning on the phoneTurning off the phoneMaking a call
BenQ C600 Mobile Phone• From "Incoming Call" log, choose a number to dial and press key.• From "Missed Call" log, choose a number to dial and press key. When you enter a phone number, you can press the key toinsert a time pause. T (time pause) will appear on the screen.If a time pause is inserted, the phone will send the numbers after thetime pause after 3 seconds. This is useful when you want to call anextension number.For example, if you want to call 1234567, extension number 89:3 seconds after the call “1234567” is connected, the phone will sendthe number “89” automatically. You can lengthen the pause durationby inserting more time pauses.For example, 6 seconds after the call “1234567” is connected, the phone will sendthe number “89” automatically.Time pause
BenQ C600 Mobile PhoneIf the attempt to make a call has failed, according to the setting inRetry Mode, you can redial the last dialed number manually or letthe phone redial the number automatically.The phone rings or vibrates when a call is received. If the caller'snumber can be found in the Phone Book, the caller's name will appearon the screen. The call time will also be shown.You can press key to answer that call. Depending on the settingin Answer Mode$$$$ “Answer By” on page 49%%%%, you can alsochoose to answer a call by pressing any key (except key) on thekeypad or turn on the auto answer function when used with a hands-free kit.When you are on a call, you can press key to end the call. Thecall timer information will flash on the screen for about three secondsand the phone will then return to standby mode.If the total call time exceeds the value you set in the Limit Alertfunction (see “Limit Alert” on page 51), a warning tone will begenerated to remind you of the total call time.During a phone call, you can choose to use the following features:• Press the alphanumeric keys to send DTMF tone (for example,when you are asked to enter ID number, account number orother data).• Press key to hold the call and receive another call from athird calling party.• Press the volume adjustment keys to adjust the ear piece volume.• Press the “Option” soft key to enter the In Call Option menu.In the menu, you can highlight the desired item by pressing or on the scroll key and then press “Select” soft key to select.Mute (Unmute): Mute or unmute current call.3-Way: activate 3-way call (see “Three way call” on page 19).Redialing a callAnswering a callEnding a callIn call options
BenQ C600 Mobile PhonePhone Book: Enter Phone Book (see “Phone Book Menu” onpage 25).Scheduler: Access Scheduler (see “Scheduler” on page 39).Scratch Pad: Use the built-in Scratch Pad to jot down phonenumbers. You can save them as described in “Scratch pad” onpage 44.If another call is received during a call, the message “Waiting” andname (or number) of the third calling party will appear on the screen.• To put the current call on hold and answer the incoming call, press key. When the incoming call is ended, you will return to theprevious call automatically.• To reject the third incoming call, press the “Cancel” soft key.While you are speaking, you can initiate another call to a third callingparty.• Press the “Option” soft key and select “3-Way” in the menu andmake a call to the third party by entering the number and press key. Or during the call, press key to hold the call andenter the number of the third calling party and press keyagain. • When the third party is connected, press key again and allthe three calling party will be connected. • To switch the calling party, press key. To disconnect all calls,press key.In the standby mode, if the speed dial function is turned on, you canlong press a alphanumeric key (key 1 ~ 9) to dial the number locatedin #1 ~ #9 in the Phone Book.Call waitingThree way callSpeed dial
BenQ C600 Mobile PhoneThe OTASP (Over-The-Air Service Provisioning) from your networkservice provider allows you to activate your network service simplyby making a phone call. For details, please contact your network service provider.You can enter the Call Logs menu by pressing or on thescroll key in main menu. There are 6 options in the Call Logs menu. You can highlight thedesired item by pressing or on the scroll key and then press key to select.• All: Display the record of all calls. You can press or onthe scroll key to scroll the records, then press key to dialor press the “Option” soft key to “Save Record” or “Erase.”Press “View”’ soft key to see detail time. • Missed: Display the record of missed calls. You can press or on the scroll key to scroll the records, then press keyto dial or press the “Option” soft key to “Save Record” or“Erase.”• Received: Display the record of received calls. You can press or on the scroll key to scroll the records, then press key to dial or press the “Option” soft key to “Save Record”or “Erase.”• Dialed: Display the record of dialed calls. You can press or on the scroll key to scroll the records, then press keyto dial or press the “Option” soft key to “Save Record” or“Erase.”• Call Timers: Press “Select” key to display the duration of theLast Call, Home Calls, Roam Calls, All Calls, and Reset Timers. OTASP callCall logs
BenQ C600 Mobile Phone• Erase Logs: Press the “Select” soft key and then or onthe scroll key to select the call logs to be erased ( Missed,Received, Dialed or Erase All). Text messagesWhen you have a new text message, the phone will generate an alertsound and the backlight will illuminate. “You have a new message!”and icon will also appear on the screen. A blinking icon meansthat you have received an urgent text message.If you have more than 1 new message, you can press or onthe scroll key to scroll through the messages. Press the “View” soft key. The sender and time of the message willappear on the screen. Press the “View” soft key again to view thecontent of the message.If you don’t want to view the message immediately, you can press the“Quit” soft key to store the message to Inbox. (See “Inbox” onpage 29)Voice mail notificationsIf you have a new voice mail, you will receive a message containing thenumber of voice mail messages.Press the “Listen” soft key and you will be connected to your voicemail box.The Call Forward function allows you to forward incoming calls to adesignated number when the phone is busy, out of reach of networkservice..., etc. Please contact your network service provider foravailability.During a phone call, you can press the volume adjustment keys on theside of the phone to adjust the ear piece volume. 7 volume levels areavailable.Reading messagesCall forwardAdjust ear piece volume
BenQ C600 Mobile PhoneKnowing What Your Phone SaysYour phone lets you know its working status by issuing sounds ordisplaying text prompts on the screen. If the battery power is getting low, the battery icon on the screen willstart to flash. If the phone has run out of the battery completely, thebattery empty message will appear on the screen and the phone willbe turned off automatically. At this time, use the battery charger to charge the battery.When the battery is being charged with phone power off, the batterycharging animation will appear on the screen. If the phone power ison, the bars in the battery icon will animate. When the battery is fullycharged, a “Charging Complete” notification will appear on thescreen.When you have a missed call, missed call information (including thenumber of call missed) will appear on the screen.If you are roaming under other network service areas, the roam iconwill appear on the screen, telling you that you are in a roamservice area or a secondary roam service area if flashing.If the phone can not acquire a network for a long time, the phone willenter power saving mode automatically. You can press any key towake up the phone.Low battery warningBattery chargingMissed call alertRoaming alertPower saving
Chapter 3: Menu Options
BenQ C600 Mobile PhoneIn standby mode, you can press the “Menu” soft key to enter the MainMenu. You can press or on the scroll key to scroll throughthe menu items and press key or “Select” soft key to enter. TheMain Menu includes many advanced options and you can get the mostfrom your phone by using these functions.
BenQ C600 Mobile PhonePhone Book MenuAdd a Phone Book record (Add)Select “Add” and press “Select” soft key. Follow the steps below toadd a new Phone Book record:Step 1: You will be prompted to enter a list including all the personalinformation of that number, the name of that number, themobile phone number, the office phone number, emailaddress and so on.Step 2: Press “Edit” soft key and enter the personal information ofthat number (maximum 12 characters) and then press “OK”soft key (If the name you entered already exists, you will beasked if you want to add a new record).There are other alternatives to add a record toPhone Book.Option 1: In standby mode, press “Book” soft key to enter PhoneBook, then select “Add”. Follow the instructions in the"Add a Phone Book record" section above.Option 2: In standby mode, enter the phone number, then press“Options” soft key and choose “Save”. Follow Step 2 and3 in the "Add a Phone Book record" section above.Option 3: In standby mode, press “Book” soft key to enter Call Logsmenu, and select "Missed", "Incoming" or "Outgoing”.In either of these menus, press “Select” soft key tobrowse the call logs. You can scroll the call logs bypressing or on the scroll key. When you find thenumber you want to add to the Phone Book in a call log,press “Option” soft key and select “Save”.Follow Step 2 and 3 in the "Add a Phone Book record"section above.
BenQ C600 Mobile PhoneFind a Phone Book recordYou can find a Phone Book record. Enter Phone Book, then scroll to “Find” and press “Select” soft key.All the Phone Book records will be listed in sequence on the LCDscreen. You can scroll the Phone Book records by pressing or on the scroll key. When you find the Phone Book record you arelooking for, press “Select” soft key to enter that record. All theinformation items of that record will appear on the screen. Select theitem you need and choose to make a call or modify the record. Inaddition, you can also find record by inputting characters.Caller GroupYou have the following caller groups to choose from: Family, Friends,Co-workers and Classmates. You can add any phone book records toa particular caller group and define such settings as ring tone, callanimation, backlight, etc. for incoming calls from a specific group. Inaddition, you can also add new groups. (maximum 20 groups includingthese default groups) Speed Dial This feature, also known as 1-touch dialing, allows you to make phonecalls quickly and easily with the touch of a button.You must add names and numbers in your phone book (see “Add aPhone Book record (Add)” on page 25) before you can use thisfeature. Then you can assign a number from the phone book to aspeed dialing location using your phone’s 1 through 9 keys.Speed dialing location 0 is reserved for your voice mail.To assign speed dial locations:Key Mapping: Press “Select” soft key to enter, and use oron the scroll key to highlight "Key Mapping",then press “Select” soft key to find your record.You can assign a number from the phone book toa one-touch dialing location using your phone’s 1through 9 keys.
BenQ C600 Mobile PhoneActivation: Press “Select” soft key to enter, and use or on the scroll key to highlight "Activation", then press “Select” soft key to enter the submenu and use or on the scroll key to highlight "On" or “Off”. Then press “Select” soft key to activate this function or not. Erase AllThis function allows you to erase all the records in the phonememory.To erase all records:All in Phone: Press “Select” soft key to enter, and use oron the scroll key to highlight "All in Phone",then press “Select” soft key to erase all records.You will be prompted to confirm with “Yes” or“No”. Choose “Yes” and enter your phone code,then all the records in the phone memory will bedeleted.StatusThis function allows you to learn the Phone Book memory status inthe phone memory.To see the Phone Book memory status on the screen:Phone Book: Press “Select” soft key and the Phone Bookmemory status in the phone memory will bedisplayed on the screen.View your own phone number (My Number)Select “My Number” in the Phone Book menu and your phonenumber will be displayed on the screen.
BenQ C600 Mobile PhoneCall Logs MenuThe Call Logs menu is where you can store and manage phonenumbers. You can use or on the scroll key to highlight an item andpress “Select” soft key to enter. There are 6 options in the Call Logs menu. You can highlight thedesired item by pressing or on the scroll key and then pressthe “Select” soft key.• All: Display the record of all calls. You can press or onthe scroll key to scroll the records, then press key to dialor press the “Option” soft key to “Save Record” or “Erase.”Press “View“ soft key to view detail time.• Missed: Display the record of missed calls. You can press or on the scroll key to scroll the records, then press keyto dial or press the “Option” soft key to “Save Record” or“Erase.” Press “View“ soft key to view detail time.• Received: Display the record of received calls. You can press or on the scroll key to scroll the records, then press key to dial or press the “Option” soft key to “Save Record”or “Erase.” Press “View“ soft key to view detail time.• Dialed: Display the record of dialed calls. You can press or on the scroll key to scroll the records, then press keyto dial or press the “Option” soft key to “Save Record” or“Erase.” Press “View“ soft key to view detail time.• Call Timers: Press “Select” key to display the duration of theLast Call, Home Calls, Roam Calls, All Calls, and Reset Timers. • Erase Logs: Press the “Select” soft key and then or onthe scroll key to select the call logs to be erased ( Missed,Received, Dialed or Erase All). Call logs
BenQ C600 Mobile PhoneMessages MenuThe options in the Messages Menu allow you to deal with voice mail,text messages and Email. You can use or on the scroll key to highlight an item andpress “Select” soft key to enter.The new messages will be displayed here. You can see the number ofnew messages. This item allows you to compose messages. Press “Select” soft key toenter and you will be prompted to enter your desired messages. The messages you sent will be displayed here. You can see themessages you sent. This item provides 10 quick messages for you to use. Press “Select”soft key to enter the submenu and then press or on thescroll key to select the quick message you want to use. If you wishes to save the current message, you can press the “Edit”soft key with the “Options” field highlighted and then choose “save”from the menu. It will be stored in this area and you can compose thismessage later.InboxComposeOutboxQuick MsgDraft
BenQ C600 Mobile PhoneThe new voice mail messages will be displayed here. You can see thenumber of new voice mail messages and press “Read” to connect toyour voice mail box. This is a network dependent function. Please contact your networkservice provider for details.A Web Msg is a small WAP message. When the WAP browserreceives an alert from the WAP server, the alert is put into BrowserAlert Inbox. You can press "Select" soft key to enter Browser AlertInbox, and view the received Web messages.You can receive cell broadcast offered by your network operator, andchoose preferred topics and languages.This menu item includes several options to adjust the messagesettings. Press “Select” soft key to enter the submenu.This function allows you to erase all the messages in the Inbox,Outbox or Draft area. Press “Select” soft key to enter the submenuand choose to erase all the messages. Voice mailWeb MsgBroadcastsMsg SettingErase All
BenQ C600 Mobile PhoneCreat a chat session that enables fast text message conversations withanother phone. This item contains tools and mailboxes for receiving and sendingemails. Write and send new messagesTo write a new message:There are 2 ways to write a new message:Option 1: In the Messages Menu, select “Compose”.Press or on the scroll key to the content field,press “Edit” soft key to enter the desired content of themessage. When finished, press “OK” soft key. Now you can send the message. Follow the steps in the“To send a message” section below.Option 1I: In the Messages Menu, select “Quick Msg”.10 quick messages will be available for you to select.Select the one you desired and press “Send” key.Now you can send the message. Follow the steps in the“To send a message” section below.To send a message:• After you have completed writing a message, then press or on the scroll key to the phone number field, press “Edit”soft key to enter the receiver’s phone number. The “Send to”screen will appear. Now you can select one of the followingmethod to enter the receiver’s phone number:Chat RoomEmail
BenQ C600 Mobile PhonePhone #: Enter the receiver’s phone number and press “OK” softkey.Phonebook: Pick up the receiver’s phone number from Phone Book.When finished, you can select “Send” soft key to send the messageright away. Also, you can press or on the scroll key to theoption field and press “Edit” soft key to access the options for thismessage. These options are shown as follows: 1. Save: Save this message to draft.2. Callback #: Specify the callback number of this message.3. Delivery Acknowledgement: Set up the delivery acknowledgement. If you set it to “Yes”,you will receive a notification when a message is successfullysent or failed.4. Priority: Specify the priority of the message. You can choose from“Normal” or “Urgent”.5. Signature: Signature is a short text (e.g. your name) that will beautomatically attached to your outgoing messages ifenabled. Press the “Select” soft key to access itsoptions below:Enable: Allows you to enable the signature function.To enable, press “Select” soft key. If there isno existing signature text, you will beprompted to enter the signature. Whenfinished, press the “Ok” soft key.View: Allows you to view existing signature.Edit: Edit existing signature.6. Expire Period: You can set up the expiration period of messagehere. Expiration period is the time the messagecenter handles the messages you sent and deliverthem to the receiver you specified. If due to anyreason, the message can not be deliveredsuccessfully within the expiration period, themessage will be removed from the messagecenter.You can specify the duration in 30 minutes, 1hour, 2 hours, 12 hours, 1 day, 2 days, 3 days.7. Insert Object: You can select to put some objects like Animation,Picture or Sound in the message.
BenQ C600 Mobile PhoneView outgoing messagesThe messages to be sent are stored in Outbox. You can enter theOutbox by selecting “Outbox” in the Messages Menu.If you have multiple outgoing messages, press or on the scrollkey to browse messages.Press “Select” soft key to read the selected message. While readingthe message, you can press the “Options” soft key and select from theoptions below:Status: Check to see if this message is sent successfully or not.Erase: Delete this message.Send Again: Send this message again.Erase messagesYou can erase all messages in the Inbox, Outbox, or Draft.Erase messages in the Inbox• In the Messages Menu, select “Erase All”, “Inbox”.• Press “Yes” soft key to erase.Erase messages in the Outbox• In the Messages Menu, select “Erase All”, “Outbox”.• Press “Yes” soft key to erase.Erase messages in the Draft• In the Messages Menu, select “Erase All”, “Draft”.• Press “Yes” soft key to erase.Customize message settingsTo customize message settings, select “Msg Setting” in the MessagesMenu.You can use the following items provided to customize messagesettings:
BenQ C600 Mobile PhoneCallback #: You can set up the Callback number for all youroutgoing messages here. You can also set up the callbacknumber separately before you send a message.Delivery Acknowledgement: You can set up the status of messagedelivery acknowledgement here. Ifyou set it to ”Yes”, you will receive anotification when a message issuccessfully sent or failed. Signature: Signature is a short text (e.g. your name) that will beautomatically attached to your outgoing messages ifenabled. Press the “Select” soft key to access its optionsbelow:Enable: Allows you to enable the signature function. Toenable, press “Select” soft key. If there is noexisting signature text, you will be prompted toenter the signature. When finished, press the“Ok” soft key.View: Allows you to view existing signature.Edit: Edit existing signature.Expire Period: You can set up the expiration period of messagehere. Expiration period is the time the messagecenter handles the messages you sent and deliverthem to the receiver you specified. If due to anyreason, the message can not be deliveredsuccessfully within the expiration period, themessage will be removed from the message center.You can specify the duration in 30 minutes, 1 hour,2 hours, 12 hours, 1 day, 2 days, 3 days.Save Msg: With this function, you can decide to save the messageyou sent to the Outbox or not. After you get theacknowledgement of the message, press the “Select” softkey to access it’s option as follow shows:Auto Save: Save the message you sent to the Outbox.Prompt: Allows you to save it or not.Not Save: Not to save the message you sent to theOutbox.
BenQ C600 Mobile PhoneTools MenuThe Tools Menu provides several extra tools. You can use or on the scroll key to highlight an item andpress “Select” soft key to enter.Using BrowserTo enter Browser, select “Browser” in the Tools Menu and press“Select” soft key, then select “Start Browser”, or long press key in standby mode. A few seconds later, the home page will appearon the screen.Now you can access the various on-line information through yourphone. For details on the content of on-line service and how to use it,please contact your network service provider. Please see the table below for the icons that may appear on thescreen and their meanings:Icon Meaning MessageThis icon indicates that there are new andunread incoming web alert messages orunsent outgoing web alert messages.Digital modeThis icon appears when the phone worksin digital mode. You can access WAPservice only when this icon appears.ConnectedThis icon appears when the phone isconnected to the WAP server.Secure modeThis icon appears when you are in asecure web browser session.Browser
BenQ C600 Mobile PhoneKey operations in BrowserPlease see the table below for the key operations in Browser:Browser optionsYou can long press key to enter the Browser menu to accessthe following options:• Reload: Reload current web page.• Home: Return to the home page.• Bookmarks: Open the bookmark list and choose a bookmark.• Mark site: Bookmark current web page.• About Openwave: Display the Browser version and informa-tion about Browser and the phone.Press... To...End/Powerkey• Return to the home page.• Long press to exit Browser.Scrollkey Select an item in a menu.Clear key• Return to the previous page.• Long press to return to the homepage.• Clear current character when enter-ing text.• Long press to clear all characterswhen entering text.Star key Long press to enter Browser options.Pound key Long press to bookmark current website.Volume adjustmentkey Scroll the page up or down.Alphanumeric keys Long press a numeric key to jump to thebookmarked pages 1~9 in the bookmarklist.
BenQ C600 Mobile Phone• Advanced: Provides advanced Browser setting options. Pleasecontact your network service provider for details.Entering text in BrowserYou might be asked to provide text information when accessing on-line service (e.g, your ID number or sending messages), you can pressalphanumeric keys to enter texts. Your phone provides 3 text entrymodes.To switch among these modes, press right soft key until you find thedesired one.alpha: Allows you to enter English characters. You can press key to change the character case.SYM: If this mode is selected, a symbol list will appear on the screen.Press an alphanumeric key that corresponds to the number ofthe symbol to enter the one you want.You can press “More” soft key to get more symbols.NUM: Allows you to enter numbers.Exit browserTo exit Browser, long press key.You can use this function to set up the alarm clock you need and store the alarm clock setting in the phone memory. There are three settings for you to choose.You can use and on the scroll key to choose the item you want to set. Then press “Select” soft key to enter the submenu. You will be promped to enter the time of your alarm clock setting.Once: Press “Select” soft key and you will be prompted to enter the time of your alarm clock setting. In this mode, the alarm clock will only activate once.Daily: Press “Select” soft key and you will be prompted to enter the time of your alarm clock setting. In this mode, the alarm clock will activate every day.Mon-Fri: Press “Select” soft key and you will be prompted to enter the time of your alarm clock setting. In this mode, the alarm clock will activate from Monday to Friday.Alarm clock
BenQ C600 Mobile PhoneOff: Press “Select” soft key and you can set the alarm clock functionoff.You can use your phone as a handy calculator. A cursor will appear atthe upper left of the screen. Follow the chart below to enter numbersand arithmetic symbols.&'(!&'(!&'(!&'(!)*+'$,-./+,% ,0*)*+'$,-./+,% ,0*)*+'$,-./+,% ,0*)*+'$,-./+,% ,0* $+ % $+ % $+ % $+ %$%$%$%$%$+%$,%$%$+%$,%$%$+%$,%$%$+%$,%$%1111Press the “=” soft key to display the result.     2342342342345555  !"#$%"!"#$%"!"#$%"!"#$%"&&&&242424245555'$%"'$%"'$%"'$%"%$""((((((%$""((((((%$""((((((%$""((((((Calculator
BenQ C600 Mobile PhoneView your scheduler eventsThere are 4 options in the menu. You can press or on thescroll key to select an option, and press "Select" soft key to enter.View Calendar: View the calendar and see the events of a particularday.View Event: View the events that have already occurred.Add Event: Add new events to your schedule.Erase All: Erase all events.If there are no events for your selection, "No Record" will appear onthe screen. Otherwise you can press or on the scroll key toselect the record you want to view and press "Select" soft key to seethe detail, or long press key to delete the record.In the “View Event” screen, you can choose a specified event bypressing "Select" soft key to access the following two main options:1. View: After pressing “Selct” soft key, you can see the followingdetails:Event type: Select the event type.Description: The description of the event.Date: The date of the event.Time: The time of the event.Alarm : Select the alarm type: No Alarm, On Time, MinsBefore, Hours before.Repeat : Select the event repeat option: No Repeat, Daily,Weekly.To modify the details, you can press “Edit” left soft key. To savethe event, you can press “Done” right soft key. 2. Erase: Press "Select" soft key again and the selected event will bedeleted.Scheduler
BenQ C600 Mobile PhoneAdd an eventYou can add new events to your scheduler, and you can choose to letthe phone generate an alarm to remind you of the event.To add a new event, first select "Add" then press "Select" softkey to select this item, then a "Reminder" menu appears:Meeting : add a new meeting.Call : add a new call (will prompt for a phone number).Birthday : add a new birthday.Other : add some other reminder.Press or key to select the reminder type you want, then youwill be prompted to key in the contents of the event and select thedate of it. When finished, the Option menu will follow:Date : Enter the date of the event.Time : Enter the time of the event. After the time is set, you willsee the screen become similar to that in “View Event”.You can also press “Edit“ soft key to edit the details ofthe event.Alarm : Select the alarm type: No Alarm, On Time, Mins Before,Hours before.Repeat : Select the event repeat option: No Repeat, Daily,Weekly.You can press “Done” soft key to save the new event to memory.Erase allYou can use this function to delete all events in the scheduler.After you press "Select" soft key to select this item, press "Yes"soft key and all events in the memory will be erased.
BenQ C600 Mobile PhoneYour phone provides 5 interesting games: Snake, Digit, Brick, FiveStone and Box World.SnakeMake the snake grow longer by feeding it with as many goodies aspossible. Use (up), (down), (right) and (left) to direct the snake to a goody. The longer the snake, the higherthe score. You are not allowed to stop the snake or make it go backwards.When the snake hits its own tail or eggs, or the surrounding frame, agame is over. Then the screen will show your score.After you select this game, you will see the following:Continue: Resume a paused game. This item appears only when agame has been temporarily halted.New Game: Start a new game. If you want to exit the game before itis over (to halt a game), press key. To resume a haltedgame, go to Continue. Set Level: Set the difficulty level of the game.Last View: Show the result of the last game you played.Help: Read the instructions for the game.DigitRearrange the numbers in the correct order shown below. Use (up), (down), (right) and (left), or (up), (down) on the scroll key to move the numbers. Whileplaying, the screen will show the time and number of steps you took.The menu options in this game are exactly the same as those in Snakeexcept that there is no Top Score.))))****++++,,,,----....666677778888Games
BenQ C600 Mobile PhoneBrickIn this game you have to break an entire set of brick using a balland a racket. When you have broken all of the bricks, you go tothe next level with a new set of bricks to break.•Start a game by pressing the key to fire the ball. The ball ismoving through the screen, bouncing in different directionsafter hitting the frame or the bricks. When the ball hits a brick,the brick disappears.•Use (left) and (right) to move the rackethorizontally at the screen bottom. You can also press-holdthese keys to move the racket without stopping. When the ballreaches the bottom, you must hit it to make it bounce towardsthe bricks.•You can change the direction in which the ball bounces byhitting the ball in a particular angle.•You have three credits for each game. If the ball goes past thebottom, you lose one credit. The game ends if you lose all yourthree credits.•The more bricks you break, the more points you score.•A falling object may appear as the ball hits the bricks. You cantell what the object means by looking at the icon shown at thebottom right of the screen, which helps you decide whether tocatch or dodge the object:• The skull warns you to dodge a deadly falling object. Ifthe object hits your racket, you lose one credit.• The key tells you to catch a falling object for access tothe next level directly.• "$" tells you to get a falling object for bonus.• The missile tells you that catching the object will makethe ball bounce faster.• indicates that catching the object will shortenthe racket narrower.• indicates that catching the object will lengthenthe racket.The menu options in this game are the same as those in Snake.
BenQ C600 Mobile PhoneFive StoneThis is a traditional checker-type game in which the lining up offive pieces in a straight line scores victory. It’s a kind of gobang.Box WorldYou have to push the boxes to the black spots to score.With this function, you can set your hour reminder. Choose “On”and press “Select” soft key to activate this function.This function allows you to convert foreign and local currency.With this function, you can easily check the current time in 6 majorcities in the world. Select a city and the current time will appear onthe screen.This item provides you a stopwatch function which allows you tocount time.Hour ReminderCurrency ConverterWorld timeStopwatch
BenQ C600 Mobile PhoneThis item provides you a quick key list which allows you to find anduse these common functions. With this function, you can easily findthe function you want to use.The number you entered during a call (see “In call options” onpage 18) is stored here. You can choose to save it to Phone Book.This function allows you to download information from internet byWAP function. There are four items for you to choose.Quick KeyScratch padDownload
BenQ C600 Mobile PhoneSettings MenuThe options in the Settings Menu allow you to customize the date,display and other settings of your phone according to yourpreferences.You can use or on the scroll key to highlight an item andpress “Select” soft key to enter.Disp Time/Date• Press “Select” soft key to choose time and date display mode.Date Format• Press “Select” soft key to choose date display format.Time Format• Press “Select” soft key to choose time display format.PowerOn Time • This item allows your handset to be powered on at a specifiedtime automatically. PowerOff Time • This item allows your handset to be powered off at a specifiedtime automatically. Set Time You can set up the system time of your phone here. However, if thedigital network is available, the time setting of the digital network willoverride your time setup here.To set up current time:Date/Time
BenQ C600 Mobile Phone• Press the alphanumeric keys to set up current hour and minute.Use or on the scroll key to select “AM” or “PM”. Press“OK” soft key.• Then, use the alphanumeric keys to set up current date.• Press “OK” soft key.Your phone provides screen saver function. After you activate thescreen saver, if no incoming call is received and you leave the keypaduntouched for about 5 minute, the animation will appear on thescreen.To activate screen saver:• Select “Screensaver” in the Settings Menu.• Use or on the scroll key to highlight “Power Saving”.• Press “Select” soft key.To deactivate screen saver:• Select “Screensaver” in the Settings Menu.• Use or on the scroll key to highlight “Disable”.• Press “Select” soft key.When you press a key on the keypad, the back light of the screen willbe turned on automatically. The back light of the phone screen allowsyou to clearly read the information displayed on the screen when theenvironment is dark. However, letting the back light stay on too longwill drain the power of battery quicker. There are two items for youto modify your backlight setting:Screen SaverBacklight
BenQ C600 Mobile PhoneDuration Press “Select” soft key to view the option list and use or onthe scroll key to highlight an item, then press “Select” soft key toselect.5 Seconds: If no key is pressed after the back light is on for 5seconds, it will be turned off automatically.10 Seconds: If no key is pressed after the back light is on for 10seconds, it will be turned off automatically. 20 Seconds: If no key is pressed after the back light is on for 20seconds, it will be turned off automatically.60 Seconds: If no key is pressed after the back light is on for 60seconds, it will be turned off automatically.Always Off: Always turn off the backlight.Color Your phone provides 3 different backlight, blue, orange, and purplefor you to choose. Press “Select” soft key to view the option list anduse or on the scroll key to highlight an item, then press“Select” soft key to select.You can adjust the LCD contrast level of your phone here. Press“Select” soft key to enter and choose the level you like.You can choose the language used to display information on thephone screen.• Select “Language” in the Settings Menu.• Use or on the scroll key to select a language, then press“Select” soft key to confirm.• LCD Contrast Language
BenQ C600 Mobile PhoneWhen an incoming call is received, you can choose to use one of thefollowing modes to answer that call. To choose an answer mode:• Press “Select” soft key to view the options and use or onthe scroll key to highlight the mode you want to use:Send Key: The call can be answered by pressing “Send” keyon the keypad. Any Key: The call can be answered by pressing any key onthe keypad.FlipActivate: The call will be answered in flipactivationmode.• Press “Select” soft key to select.The Auto mode works only when a hands free or car kit is connected to thephone, or the Answer Machine function is activated.When you try to make a call but you are not successful, you can letyour phone try redialing for you. To activate auto redial function:• Press “Select” soft key to view the options and press or on the scroll key to highlight a mode you want to use. Prompt: Your phone will prompt you before retrying.Enable: If the call is not connected, your phone will retrymaking the call for 5 times.Disable: The phone does not retry making the call.• Press “Select” soft key to confirm.Answer ByAuto Redial
BenQ C600 Mobile PhoneThis item allows you to restore the default value when the phone ishaving problems. These default values are factory settings optimizedfor your phone. You will be prompted to enter your phone codebefore the default values are set.Restore Default Value
BenQ C600 Mobile PhoneCall Srvcs MenuThe Call Services Menu allows you to set up call and networkservices. You can use or on the scroll key to highlight an item andpress “Select” soft key to enter.When you dial a call, answer an incoming call or on conversation, ifthe total call time exceeds the time limit set here, the limited alerttimer will give you a warning pop up display and beep.To set up usage limit:• Press “Select” key to enter Limit Alert On/Off menu.• Use or on the scroll key to select “On”, then press“Select” soft key.• Enter the limit time in minutes.To deactivated usage limit:• Press “Select” key to enter Limit Alert On/Off menu.• Use or on the scroll key to select “Off”, then press“Select” soft key.This item allows you to choose your call service mode. There are twooptions for you to choose: CDMA only and Automatic.There are 3 options for you to choose: NAM 1, NAM 2, and Auto.Limit AlertForce ModeNAM Select
BenQ C600 Mobile PhoneYou can choose the home system to use.To select:• Use or on the navigation key to scroll the options below:Home Only:Use only home network.Automatic: The phone selects the home systemautomatically.• Press “Select” soft key to select.This item allows you to change the data service: Voice Mode, FaxMode, and Data Mode. • Once: Operating Fax or Data mode once and then it will go backto voice mode.Use this function to activate your voice privacy. Press “Select” key tostart activating “On” or “Off” to deactivate.This is an optional and network dependent feature. Please contact yournetwork service provider for availability.With this function, you can activate your phone. Press “Select” softkey and you will be prompted to confirm with “Yes” or “ No”.Choose “Yes” to activate and “No” to deactivate. System SelectData ServiceVoice PrivacyPhone Activation
BenQ C600 Mobile PhoneAudio MenuThe Audio Menu allows you to set up or change the audio settings ofthe phone. There are 5 submenus: Profiles, System Alert, Answer By,DTMF Setting, and Melody Editor, which provide you audio selectionin the Audio menu.You can use or on the scroll key to highlight an item andpress “Select” soft key to enter.Enter this sumenu to use built-in audio function. Press “Select” key tochoose audio function.Audio Mute: Audio mute alert is generated when the audio is set to be mute. Svc Change: The phone will alert when its service system changes from CDMA to AMPS or from AMPS to CDMA.Roaming: Roaming alert is generated when you are roaming under a friendly network. Minute Alert: Minute alert is generated once every minute after a phone call is connected. This item allows you to change DTMF function. Press “Select” softkey to enter and select your options. There are two options for youto choose: DTMF Mute and Duration.Enter this sumenu and you can edit your audio melody. Press “Select”key to start your edition.ProfilesSystem AlertDTMF MuteMelodyEditor
BenQ C600 Mobile PhoneSecurity MenuThe options in the Security Menu can help keep your phone fromunauthorized access. You have to enter the lock code to enter the submenu. Thedefault lock code is the last four digits of your phone number.After you enter the security code, you can use or on thescroll key to highlight an item and press “Select” soft key to enter.This function allows you to lock the phone. If the phone is locked, youcan only make emergency calls (see “Emergency number” onpage 55).To lock phone (Phone Lock):• Press “Select” soft key and then or on the scroll key tohighlight one of the following options. Power On: The next time you power on your phone, itwill be locked automatically. To unlock thephone, enter the unlock code.Now: The phone will lock immediately. Off: Cancel all lock modes.• Press “Select” soft key to select.You can change the security code of your phone.Press “Select” soft key and you will be prompted to enter the newlock code (4 digits). Enter the new lock code twice.Lock StatusChange code
BenQ C600 Mobile PhoneThis function allows you to restrict incoming and outgoing calls. IncomingRestrict all incoming calls. OutgoingRestrict all outgoing calls. Roam IncomingRestrict all incoming calls when you are roaming. Roam OutgoingRestrict all outgoing calls when you are roaming. You can store three emergency numbers in the emergency numberlist. When the phone is locked, only numbers that match the numbersin the emergency number list can be dialed.To add an emergency number:• Press “Select” soft key and the screen shows the emergencynumber stored in the memory.• Press or on the scroll key to scroll the location of theemergency number (1, 2 or 3), then press “Select” soft key tostart entering the number.• When completed, press “OK” soft key. To add more emergency numbers, repeat the steps above.Call restrictEmergency number
Chapter 4: Care and Maintenance
BenQ C600 Mobile PhoneYour phone is a delicate electronic device and should be used andhandled carefully in compliance with the instructions below. Failure toobserve these instructions may void your product warranty.• Do not use your phone in dusty and humid areas. Your phone isextremely vulnerable to liquid and sand grains can scratch thesurface of your phone.• Do not store your phone in extremely hot or cold areas. Heatcan cause damage to both the outer case and components insidethe phone. In an extremely cold area, moisture can form insidethe phone after you turn on your phone and it can damage thecomponents inside. • Do not drop, shake or knock your phone. This will cause damageto the components and circuits of the phone.• Do not use strong detergents, thinners or other corrosive liquidto clean your phone. Instead, use a clean, lint-free and slightlydampened cloth. When you do so, keep water from gettinginside the phone.• Keep your phone, batteries and accessories away from reach ofsmall children.• Use only supplied or approved replacement antenna and accesso-ries. Unapproved antenna and accessories can cause damage toyour phone and your health.• Follow the safety instructions as set forth at the beginning of thismanual.
Chapter 5: Troubleshooting
BenQ C600 Mobile PhoneWhen you encounter problems while using your mobile phone, please refer to thefollowing table to solve the problem. If problem persists, please contact your dealerimmediately for service.Problems Possible cause How to solve the problemPoor signalreceptionYou are using your mobilephone in a location (e.g. inthe basement or building)where signal is weak.Move to a location where signalcan be better received.You are using your mobilephone in a peak-demandtime (e.g. the rush hour).Make your call later.You are too far from thebase station of your networkservice provider. Move closer to a base station.Echo or noiseDue to the quality of thenetwork trunk of yournetwork service provider. Poor local telephone linequality.Hang up the phone and then dialagain. You may be switched to abetter-quality network trunk orline.The standby timebecomes shortThe standby time can dependon the system settings ofyour network serviceprovider. If you are in a location where thesignal is weak, turn off yourphone temporarily.The battery may be at theend of its service life. Use a new battery.If the phone can not getconnected to a network, itwill continue searching forthe signal from the basestation, which consumesbattery capacity. Change your location or turn offyour phone temporarily.Unable to poweron The battery is drained. Recharge the battery.
BenQ C600 Mobile PhoneVersion: 1.0Unable to chargethe batteryThe battery or charger ismalfunctioning. Contact your dealer.The phone temperature isunder 41°F or above 104°F.Change the battery chargingenvironment.Poor connection. Check to see if all connectorsare connected properly. Unable to inputdata into the PhoneBookThe Phone book memory isfull. Delete some data from thePhone Book. Unable to choosecertain function(s)Your network serviceprovider doesn't supportsuch function(s).Contact your network serviceprovider.
BenQ C600 Mobile Phone<Memo>

Navigation menu