Benq WDC10R InstaShow Host User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3007038
Application ID	GY2Vam61968V9AXoWfFTvQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	311.91kB (3898815 bits)
Date Submitted	2016-05-27 00:00:00
Date Available	2016-05-30 00:00:00
Creation Date	2017-12-06 17:37:21
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-06 17:37:21
Document Title	Users Manual
Document Creator	Adobe Acrobat 11.0.16
Document Author:	BenQ

WDC10
InstaShow™
User Manual
Copyright
Copyright © 2016 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for
any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and
to make changes from time to time in the contents hereof without obligation of BenQ Corporation
to notify any person of such revision or changes.
This user manual aims to provide the most updated and accurate information to customers, and thus
all contents may be modified from time to time without prior notice. Please visit www.benq.com for
the latest version of this manual.
The illustrations and the images in this guide are for your reference.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its aspiration
to realize the ideal of the “Bringing Enjoyment 'N Quality to Life” corporate vision with the ultimate
goal to achieve a low-carbon society. Besides meeting international regulatory requirement and
standards pertaining to environmental management, BenQ has spared no efforts in pushing our
initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing,
packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key ecofriendly design highlights of each product, hoping to ensure that consumers make informed green
choices at purchase. Check out BenQ's CSR Website at http://csr.BenQ.com/ for more details on
BenQ's environmental commitments and achievements.
4/22/16
Table of contents
Copyright ...................................................................................................................................... 2
Disclaimer ..................................................................................................................................... 2
BenQ ecoFACTS ......................................................................................................................... 2
Introduction .................................................................................................................................. 4
Product features .............................................................................................................................................. 4
Package content ............................................................................................................................................... 5
Overview ........................................................................................................................................................... 6
InstaShow Button .......................................................................................................................................................................... 6
InstaShow Host ............................................................................................................................................................................. 6
Installation ..................................................................................................................................... 8
Assembling InstaShow Host .......................................................................................................................... 8
Setting up InstaShow Host ............................................................................................................................ 8
Attaching InstaShow Host to the ceiling ................................................................................................................................. 9
Attaching InstaShow Host to a ceiling mount ........................................................................................................................ 9
Placing InstaShow Host on a table .......................................................................................................................................... 10
Installing InstaShow Host on the wall or trolley ................................................................................................................. 10
Connecting the HDMI cable and power .................................................................................................. 11
Assembling the adapter ............................................................................................................................................................. 11
Connecting the HDMI cable..................................................................................................................................................... 12
Power supply via a USB type A jack (5V/1.5V) .................................................................................................................... 12
Power supply via a power adapter.......................................................................................................................................... 13
Setting up and power supply of InstaShow Button ................................................................................ 13
Using Cable USB A(F) to USB A(M) ......................................................................................................... 15
Pairing InstaShow Button and InstaShow Host ....................................................................................... 16
When InstaShow Host is placed on the table ...................................................................................................................... 16
Waking up InstaShow Host ......................................................................................................................... 18
Storing InstaShow Buttons in the cradle .................................................................................................. 18
Starting and stopping presentation .......................................................................................19
Getting ready .................................................................................................................................................. 19
Starting presentation ..................................................................................................................................... 19
Idle presentation ............................................................................................................................................ 21
Play video with InstaShow™ ....................................................................................................................... 22
Troubleshooting ........................................................................................................................24
Product specification ................................................................................................................28
Introduction
InstaShow™ is a wireless device for corporate meeting rooms. Users expect devices to respond
instantly, apps to launch and to control at their fingertips, and information to be available on demand.
Instashow™ bypasses the complicated steps of IP addresses, driver installation, app execution, setting
selection, etc. to quickly deliver professional, stable visual quality for teams to collaborate freely and
confidently. InstaShow™ is an unique all-hardware solution without software issues for universal
compatibility and display flexibility.
Product features
InstaShow™ is equipped with the following features:
Features
True Plug & Play
No Software
InstaVideo
Auto Channel
Selection
Wireless 802.11ac
Video and Audio
Assured Performance
Extended Desktop
Description
Simply connect InstaShow™ into your USB and HDMI ports, then
push the button to start presenting immediately.
InstaShow™ doesn't need any software installation or execution.
There's no setup, configuration, or waiting for pop-ups to launch. Just
plug into your PC or Mac and start presenting immediately.
Convenient button switches between Presentation mode and Video
mode for precise productivity or smooth 1080p video, only from
BenQ. See Play video with InstaShow™ on page 22 for details.
InstaShow™ automatically selects the best wireless channel upon
boot-up, ensuring smooth presentations in any environment.
The latest 802.11ac Wi-Fi guarantees extremely smooth wireless
streaming without lag or buffering.
InstaShow™'s HDMI output supports up to 60Hz Full HD 1080p
video and stereo sound without cable clutter or complicated driver
selection.
Peace of mind for consistent wireless presentation performance
without relying on your PC.
Keep your presenter view, notes, and backup data on your laptop
screen while presenting to the wireless screen with extended desktop
in both Windows and OS X.
• Transmission distance depends on actual environment. Stated distance is based on line-of-sight measurement.
Structures constructed of steel, wood, concrete, or brick may decrease transmission distance.
• According to regulatory restrictions in different regions of the world, Wi-Fi channels cannot be used in
countries outside the purchased region.
Introduction
Package content
InstaShow Buttons
InstaShow Host
2 Antennas
Cradle
Adapter & Plugs
Cable: USB A(M) to Micro B(M)
Cable: HDMI A(M) to A(M)
Cable: USB A(F) to USB A(M)
Screws & Rubber Foot
Velcro Strap
Round Double-sided sponge
Tape
Quick Start Guide & Safety
Statement
• Available accessories and the pictures shown here may differ from the actual contents and the product
supplied for your region.
• Use original accessories to ensure compatibility.
• Always keep the product and accessories out of reach of children.
Introduction
Overview
InstaShow Button
1.
Present key with LED indicator
2.
Press to start or stop presenting.
MODE key
3.
Press to pair with InstaShow Host or to switch to
Video/Present mode.
USB 3.0 connector
Connect to a computer or laptop.
4.
HDMI 1.4 connector
5.
Connect to a computer or laptop.
RESET
RESET
Poke at the RESET hole to reset the device if the
device stops responding.
Bottom of InstaShow Button
InstaShow Host
1.
Fixture parts for the Antennas
2.
Refer to Assembling InstaShow Host on page 8
for more information.
DC 1.5A port
3.
Connect to an adapter or a display using a Cable
USB A(M) to Micro B(M).
HDMI port
4.
Connect to a display using a Cable HDMI A(M) to
A(M).
LAN port
5.
Allow users to have access to the web
management through network.
PAIRING key
6.
Press to pair with InstaShow Button.
RESET
7.
Poke at the RESET hole to reset the device if the
device stops responding.
Power button with LED indicator
8.
Press to turn InstaShow Host on and off.
Lid
6 5 4 3 2
Alignment hole
Lid of InstaShow Host
Refer to Attaching InstaShow Host to the ceiling
on page 9 for more information.
Introduction
LED indicators of InstaShow Button and InstaShow Host
Please refer below for detailed indicator and status description of InstaShow Button and InstaShow
Host.
LED indicator on
InstaShow Button
Static blue
Flashing blue
Flashing green
Static green
Flashing red
Static red
Off
Quick flashing red
LED indicator on
InstaShow Host
Static blue
Status Description
The device is presenting.
The device is in pairing state for 10 seconds.
The device is upgrading the firmware.
The device is connected and working
normally.
The device is trying to connect to InstaShow
Host or encountering a problem.
The device is starting up.
The device is powered off.
The reset process is triggered.
Status Description
Connected device is presenting.
Flashing green
The device is in pairing state for two
minutes.
The device is upgrading the firmware.
50% static green
Static green
Flashing red
Static red
Off
Quick flashing red
The device is in network standby mode.
The device is on and ready for connection.
The device is encountering a problem.
The device is starting up.
The device is powered off.
The reset process is triggered.
Flashing blue
Introduction
Installation
This section will guide you on how to prepare the unit before its initial use.
As your InstaShow™ could work with different displays, the steps required to complete the
installation may vary according to the actual environment and your display specifications. Follow the
procedures below and refer to the specified sections for details.
1. Assemble InstaShow Host with the antennas. See Assembling InstaShow Host on page 8 for
details.
2. Connect InstaShow Host to the display and power properly. See Setting up InstaShow Host on
page 8 and Connecting the HDMI cable and power on page 11 for details.
3. Connect InstaShow Button to the desired devices and power properly. See Setting up and power
supply of InstaShow Button on page 13 for details.
4. Make sure that all the connected devices have been powered on. Press the source button of the
display and make sure that the HDMI source has been transmitted. See Pairing InstaShow Button
and InstaShow Host on page 16 for details.
Assembling InstaShow Host
Assemble InstaShow Host with two antennas by turning the antennas clockwise (right) and
counterclockwise (left) to fasten them tightly.
Setting up InstaShow Host
You are provided with four different ways to position InstaShow Host.
Installation
Attaching InstaShow Host to the ceiling
1. Rotate the lid clockwise until the lid is removed from InstaShow Host.
2. Place the lid on the ceiling and locate the alignment hole.
3. Use the screws provided to lock the lid to the ceiling.
4. Lock the first hole (1).
5. Follow the instruction in the illustration below to lock the other holes (2-4).
6. Rotate InstaShow Host counterclockwise to affix InstaShow Host to the lid.
Alignment
hole
open lock
open
ope
n lo
ck
lock
Attaching InstaShow Host to a ceiling mount
If the display is mounted on the ceiling:
1. Attach InstaShow Host to the ceiling mount using the provided velcro strap.
2. Fix InstaShow Host to the mounting holder.
3. Use the supplied velcro to fix the mounting holder and InstaShow Host to the ceiling mount as
shown in the illustration.
Installation
Placing InstaShow Host on a table
If your display is placed on a table, attach the rubber foot to the recesses on lid of InstaShow Host
and put InstaShow Host right next to the display.
Installing InstaShow Host on the wall or trolley
If you need to install InstaShow Host near a display:
1. Use the round double-sided sponge tape provided to stick to the lid of InstaShow Host.
2. Affix InstaShow Host on the wall near the display.
3. Keep the antennas away from any signal obstructions.
You can also place InstaShow Host on a mobile display trolley. See the illustration.
10
Installation
Connecting the HDMI cable and power
Once InstaShow Host has been positioned properly near the display, connect the HDMI cable and
power to ensure signal transmission.
To supply power to InstaShow Host, do one of the following.
Assemble the adapter. See Assembling the adapter on page 11 for details.
• Some of the BenQ projector models may be equipped with a USB type A jack (5V/1.5V) to provide
power supply for InstaShow Host. See Power supply via a USB type A jack (5V/1.5V) on page 12 for
details.
• For display models without a USB type A jack (5V/1.5V) for power supply, see Power supply via a
power adapter on page 13 for details.
Assembling the adapter
Every InstaShow™ adapter has two plug socket options included in the box: standard European and
standard British.
To connect the plug of your choice, follow the steps below.
1. Align and insert the bottom hook to the adapter.
2. Close the gap by pushing the plug.
3. The adapter is successfully assembled when it clips into place.
OPEN
PUSH
LOCK
To disconnect the plug, follow the steps below.
OPEN
LOCK
1. Push the latch in the middle.
2. Open the gap by pulling the gap downwards.
Installation
11
Connecting the HDMI cable
Connect the HDMI cable to the HDMI out jack of InstaShow Host and the HDMI input jack of the
projector.
HDMI
USB
HDMI
USB
Power supply via a USB type A jack (5V/1.5V)
Just connect one end of the supplied USB cable to the mini USB jack of InstaShow Host and the other
end to the USB type A jack (1.5V) of the BenQ projector. See the illustration.
HDMI
USB
HDMI
12
Installation
USB
Power supply via a power adapter
Connect the supplied USB power adapter to the mini USB jack of InstaShow Host and plug the other
end into a wall socket. The LED indicator on the power button of InstaShow Host lights up in static
red when InstaShow Host is connected to the power mains.
HDMI
HDMI
USB
For BenQ IFP (Interactive Flat Panel) products, please have power supply via a power adapter.
Setting up and power supply of InstaShow Button
1. Connect InstaShow Button’s HDMI and USB jacks to the corresponding inputs of a laptop. See
the illustration.
HDMI
1.4
USB
3.0
MODE
Installation
13
2. The LED indicator of InstaShow Button will turn red when the Button is trying to connect to
InstaShow Host.
3. Press Present key when the LED indicator turns green.
• Handle the Button cable with care. Rough handling might cause defects.
• Take the plug instead of the cable when inserting or removing InstaShow Buttons.
14
Installation
Using Cable USB A(F) to USB A(M)
Two USB cables are provided for MacBook and Windows laptop users. One is about 15 cm, and the
other is about 80 cm to suit your usage situation.
1. Insert the HDMI cable of InstaShow Button to the HDMI converter of your laptop.
2. Connect the cable USB A(F) to your laptop.
3. Connect InstaShow Button’s USB jack to the Cable USB A(M).
15cm
80cm
HDMI
HDMI
USB
USB
Cable USB A(F) to
USB A(M)
Cable USB A(F) to
USB A(M)
Make sure your own HDMI converter is workable.
Installation
15
Pairing InstaShow Button and InstaShow Host
A set of InstaShow™ includes an InstaShow Host and two InstaShow Buttons, which are paired
before shipment. In that case, you don’t need to pair them again. However, if you buy two or more
sets of InstaShow™, and you want to pair a Button with a different Host, you need to follow the
instruction below. If you buy an additional InstaShow Button kit, and you want to pair the new
Buttons with your Host, you need to follow the instruction below as well.
When InstaShow Host is placed on the table
1. Make sure your InstaShow Host is ready with power supply. Connect InstaShow Button’s HDMI
and USB jacks to the corresponding inputs of a laptop.
HDMI
1.4
USB
3.0
MODE
2. When InstaShow Button is connected to the laptop, the LED indicator of InstaShow Button will
flash red. InstaShow Button is in pairing mode, waiting to pair with your InstaShow Host.
If an InstaShow Button nearby has been paired with an InstaShow Host before, it will turn static green.
16
Installation
3. Press PAIRING key of InstaShow Host for five seconds, then the LED indicator of InstaShow
Host will blink blue for two minutes, waiting to pair with InstaShow button.
00:00:00
00:00:05
PAIRING
4. Press MODE key on the side of InstaShow Button for five seconds. The LED indicator of
InstaShow Button will blink blue for about 10 seconds. The pairing process is ongoing. The
“Pairing” message will be shown on the screen.
00:00:00
00:00:05
MODE
pairing...
pairing sccuess, sn: WDX10001103G
The images are for reference only. Each product has different serial number.
Installation
17
5. The LED indicator of InstaShow Button turns static green when InstaShow Host and InstaShow
Button are successfully paired.
The maximum number of InstaShow Buttons you can pair with one InstaShow Host is 16.
Waking up InstaShow Host
When InstaShow Host’s power indicator turns 50% static green, press Present key of InstaShow
Button to start presentation and InstaShow Host will wake up automatically.
Storing InstaShow Buttons in the cradle
You are provided with two different ways to store InstaShow Buttons in the cradle. Place InstaShow
Buttons in the cradle vertically (1) and horizontally (2). See the illustration.
18
Installation
Starting and stopping presentation
This section will guide you on how to start and stop a presentation using InstaShow™.
Getting ready
Make sure that all the connected devices have been powered on and ready for the presentation.
As your InstaShow™ could work with different projectors, IFPs, TVs, or monitors with standard
HDMI ports, the steps required to start a presentation may vary according to the actual environment
and your display specifications. Follow the procedures below and refer to the specified sections for
details.
1. To start a presentation, see Starting presentation on page 19 for details.
2. To stop a presentation, see Idle presentation on page 21 for details.
3. To learn more about InstaVideo, see Play video with InstaShow™ on page 22 for details.
Starting presentation
1. Make sure the power is supplied to InstaShow Host. See Connecting the HDMI cable and power
on page 11 for more information.
2. Choose the HDMI source of the display. You can see the Guide screen.
Guide
Screen
Starting and stopping presentation
19
3. Please follow the instruction on the Guide screen to supply power to InstaShow Button. You can
also see Setting up and power supply of InstaShow Button on page 13 for more information. The
LED indicator of InstaShow Button is in static green when InstaShow Button is connected and
working properly. Then you can see the Idle screen.
Idle
Screen
4. To start presentation, press Present key.
5. The device starts presenting, and the LED indicator of InstaShow Button turns static blue.
Present
key
• Make sure the transmission distance between InstaShow Button and InstaShow Host is within 8M and with no
obstacles.
• InstaShow™ supports MacBooks and Windows laptops to mirror an extended desktop.
20
Starting and stopping presentation
Idle presentation
1. To stop presentation, press Present key.
2. The device stops presenting, and the LED indicator of InstaShow Button turns green.
3. Users can press Present key to go back to presentation.
Present
key
Starting and stopping presentation
21
Play video with InstaShow™
Our exclusive InstaVideo function optimizes InstaShow™'s audiovisual settings to instantly switch
from clear Presentation mode to smooth Video mode with stereo sound at the click of a button
without requiring IT support, cable clutter or complex software settings. By enabling presenters to
quickly customize the projection for precise productivity or smooth wireless Full HD 1080p video,
users can confidently blend text, graphs and charts, pictures, and multimedia audio and video without
hesitation for the most effective meetings.
InstaVideo introduces two modes: Presentation mode and Video mode.
1. The default mode is Presentation mode. It presents clear document files.
2. If you want to view your full HD 1080p video projected smoothly, switch to Video mode by
pressing MODE key to proceed.
22
Starting and stopping presentation
3. You can see the Video message on the upper left corner of the screen. Now you can play full
HD 1080p videos smoothly.
Video
Video
InstaShow™ is primarily for the use of business presentation with documents such as PowerPoint, Word, Excel,
PDF, and Full HD video clips. If users have home theater wireless video display demand, please contact local agent
about BenQ WDP02 product for home entertainment usage.
Starting and stopping presentation
23
Troubleshooting
Category
Problem
Your screen is not
appearing on the
display when
pressing InstaShow
button.
Cause
Web Management >
The system is locked. Advanced Setting> Screen
Lock > Disable
InstaShow Button is InstaShow Button should be
connecting to other paired again with InstaShow
InstaShow Host.
Host.
Press the present key until the
Pressing time is not
LED indicator turns from green
enough.
to blue.
The screen turns
blank or flickers
when InstaShow
Host is presenting
Insufficient power
(power connect
supply
through USB type A
not guaranteed with
5V 1.5A).
Your screen
Insufficient power
supply for InstaShow
Button. The old
laptop with USB 2.0
port may be used as
the power supply for
InstaShow Button.
The screen lags
seriously and the
audio is breaking up
sometimes.
Wi-Fi interference or
signal attenuation
24
Troubleshooting
Solution
Change power supply of
InstaShow Host to a power
adapter.
• Make sure you use USB 3.0 as
the power supply for
InstaShow Button.
• If the USB 2.0 port is the only
option for the power supply
for InstaShow Button, try to
reduce the power
consumption of InstaShow
Button by changing Picture
Quality Mode to Low
Power in the web
management.
• Make sure the transmission
distance is within 8M and with
no obstacles.
• Restart InstaShow Host in
order to rescan the Wi-Fi 5G
channel.
• Log in the Web Management
> Wireless Network > WiFi Radio Setup > toggle the
Rescan button.
Category
Problem
The message, "No
Signal", from
InstaShow Host is
shown on the
display when
InstaShow Button is
presenting.
Your screen
Your screen is
shown, but your
audio is not playing
on the audio system
of the meeting
room.
Your content is
removed from the
display and the LED
indicator of your
Button is blinking
red.
InstaShow Button
The LED indicator
of InstaShow Button
is blinking red when
the power is on.
The LED indicator
of InstaShow Button
is always off.
Cause
The HDMI
connection between
your laptop and
InstaShow Button is
loose.
Solution
Reconnect the HDMI cable of
InstaShow Button.
• Reconnect the USB cable of
InstaShow Button.
• Reboot your laptop.
The audio signal on
Right click on the speaker icon
your laptop is muted. and switch off the mute.
The audio output of
the laptop hasn’t
Change the default audio output
been set to the
to the second screen
second screen
(InstaShow™) on the laptop.
(InstaShow™) from
the EDID of
InstaShow Button.
1. InstaShow Host will restore
the Wi-Fi connection
The wireless
automatically.
connection is lost
2. If this fails, the LED indicator
between InstaShow
of your Button starts blinking
Button and InstaShow
red.
Host.
3. Unplug the Button from your
laptop and try again.
Make sure the transmission
Wi-Fi interference or
distance is within 8M and with
signal attenuation
no obstacles.
InstaShow Host has
Make sure InstaShow Host is
not been turned on. turned on.
InstaShow Host has
InstaShow Host should pair
not paired with
with InstaShow Button again.
InstaShow Button.
Make sure the transmission
Wi-Fi interference or
distance is within 8M and with
signal attenuation
no obstacles.
Check the USB port of your
There is no power
laptop. If the port fails to
supply.
function, try other USB ports.
Your laptop cannot
detect the second
monitor.
Troubleshooting
25
Category
InstaShow Button
InstaShow Host
Problem
Cause
InstaShow Button
Insufficient power
automatically
supply
restarts sometimes.
The display is
switched off.
The wrong input is
selected.
The display cable is
not connected
properly.
The display fails to
show InstaShow
Host’s output
resolution at 720p in
"Guild Screen" or
"Idle Screen".
InstaShow Host is in
Nothing is shown
on the display at all. Network Standby
Mode when network
standby function is
enabled.
InstaShow Host is in
HDMI Standby
Mode when HDMI
standby function is
enabled.
InstaShow Host is
powered off.
Insufficient power
supply
26
Troubleshooting
Solution
• Make sure you use USB 3.0 as
the power supply for
InstaShow Button.
• If the USB 2.0 port is the only
option for the power supply
for InstaShow Button, try to
reduce the power
consumption of InstaShow
Button by changing Picture
Quality Mode to Low
Power in Web Management.
Switch on the display.
Select the correct input.
Insert the HDMI cable between
InstaShow Host and the display
device again.
Replace the display with a new
one that supports output
resolution at 720p.
Press present key of InstaShow
Button to start presentation.
Briefly press the power button
on InstaShow Host or power
on the display (connected to
InstaShow Host with an HDMI
cable). InstaShow Host will
wake up automatically.
Briefly press the power button
on InstaShow Host.
Change power supply of
InstaShow Host to a power
adapter.
Category
EDID
Pairing
Windows
Software
Problem
Cause
The HDMI
connection between
After connecting
your laptop and
InstaShow Button
to your laptop, the InstaShow Button is
loose.
second screen
(InstaShow™)
Laptop problem
cannot be detected. InstaShow Button is
shutdown.
1. Error: 004
2. InstaShow Host
has reached the
The message,
maximum number
"Pairing failed", from
of pairing.
InstaShow Host is
shown on the
Wi-Fi interference or
display when
signal attenuation
InstaShow Host is
pairing with
InstaShow Button has
InstaShow Button.
not entered the
pairing mode in time.
When presenting a
video file via Gom
Media Player, the
full-screen image is
cut into upper and
lower halves.
Solution
Reconnect the HDMI cable of
InstaShow Button.
Reboot your laptop.
Reconnect the USB cable of
InstaShow Button.
Log into the web management,
then select Pairing Status >
Delete
Delete unnecessary pairings.
Make sure the transmission
distance is within 8M and with
no obstacles.
When InstaShow Host enters
the pairing mode, InstaShow
Button should also enter the
pairing mode within two
minutes.
Media player
Use other media players to play
video files, such as Windows
Media Player.
Cannot Log in
Forget the account
and password.
1. Reset InstaShow Host.
2. The default log in account:
admin
3. The default log in password:
0000.
Laptop cannot
connect the SSID
with the correct
password by Wi-Fi.
Laptop Wi-Fi module Laptop can connect InstaShow
cannot support
Host with an Ethernet cable
802.11 AC.
instead of Wi-Fi connection.
Web management
Troubleshooting
27
Product specification
Feature
Color
Video outputs
Frame Rate
Output resolution
Input resolution
Number of simultaneous connections
Audio
Wireless transmission protocol
Data rate wireless
Frequency Band
Authentication protocol
Security (encryption)
Support platform
Reach
Temperature range
Humidity
Black
HDMI 1.4, comply with HDCP
Up to 30fps depending on environment
Video Timing: 1280x720 (720P), 1920x1080 (1080p)
PC Timing: 800 x 600, 1024 x 768,1280 x 768,
1280 x 1024,1280 x 960,1360 x 768,1440 x 900,
1400 x 1050,1680 x 1050
Up to 1920x1080
16 pcs
Stereo, Radio quality 16bits 48KHz
IEEE 802.11ac, 5GHz, 2T2R
Up to 400Mbps
5GHz
WPA2 (WPAS-PSK (Pre-Shared key) / WPA2Enterprise)
AES 128 bit
Windows, MAC, Chrome. Any OS supports HDMI
standard 1.4
Max. 8M between InstaShow Button and InstaShow
Host
Operating: 0°C to +40°C (+32°F to +104°F)
Storage: -10°C to +60°C (+14°F to +140°F)
Storage: 5% to 90% relative humidity, non-condensing
Operation: 10% to 80% relative humidity, noncondensing
InstaShow Button
Cable
Reset button
Mode key
LED
USB Type A, HDMI Cable
x1
x1
Red (booting), Green
(Wi-Fi connected), Blue
(presenting)
Power supply
Power consumption
Dimension
DC 5V±10%, 0.9A
normal: 4.5W
84.5*189.55*19.9mm
Weight
100g
x1
x1
x1 (10/100 Mbps)
x1 HDMI 1.4 (video and
audio)
Power supply
DC 5V±10%, 1.5A
InstaShow Host
Power button
Pairing key
LAN
Video output
28
Product specification
Power consumption
Normal: 5W
Network standby: 2W
HDMI standby: 0.02W
Feature
DC Power
Jack
x1 (micro USB)
Dimension
110*110*27mm (99mm with
antenna, not include antenna
and rubber foot)
LED
Red (booting), Green
(ready for connection),
Blue (presenting)
Weight (include
antenna)
150g
85*97.5*170.4mm
Weight
630g
Cradle
Dimension
Product specification
29
InstaShow Buttons
InstaShow Host
2 Antennas
Cradle
ope
n lo
ck
WDC10
InstaShow
Quick Start Guide
Adapter & Plugs
Cable: USB A(M) to
Micro B(M)
Cable: HDMI A(M) to
A(M)
Cable: USB A(F) to
USB A(M)
Screws & Rubber Foot
Velcro Strap
Round Double-sided
Sponge Tape
Quick Start Guide
& Safety Statement
P/N: 4J.JF801.001
2-A
2-B
2-C
2-D
ope
n lo
ck
open lock
open
WDC10_QSG.indd 1
lock
2016/3/17 上午 08:51:55
3-A
3-B
HDMI
HDMI
HDMI
USB
HDMI
HDMI
USB
HDMI
HDMI
1.4
USB
USB
HDMI
HDMI
USB
USB
3.0
8m
WDC10_QSG.indd 2
USB
www.BenQ.com
2016/3/17 上午 08:51:56

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : BenQ
Create Date                     : 2016:05:19 16:09:40+08:00
Modify Date                     : 2016:05:19 16:18:16+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:05:19 16:18:16+08:00
Creator Tool                    : Adobe Acrobat 11.0.16
Format                          : application/pdf
Creator                         : BenQ
Document ID                     : uuid:cfa8c7b2-77bc-4416-b360-665396eb0da6
Instance ID                     : uuid:64afa5ae-d48a-407c-ab12-477e84a17e35
Producer                        : Adobe Acrobat 11.0.16
Page Count                      : 31

EXIF Metadata provided by EXIF.tools