BiSRO ALC-502 REMOTE CONTROL User Manual LC50SeriesManual user

Download:
Mirror Download [FCC.gov]
Document ID	1057755
Application ID	SJNizLfKz5F8s7+Tyu2Hpg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.84kB (2422947 bits)
Date Submitted	2009-01-16 00:00:00
Date Available	2009-01-16 00:00:00
Creation Date	2009-01-14 16:58:03
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-01-14 17:09:19
Document Title	사본 - LC50SeriesManual(user).pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ghpark

SIGNCA
CAR SECURITY SYSTEM
LC-50 SERIES
SIGNCA
CAR SECURITY SYSTEM
Thank you for purchasing our product. Our systems have all been
designed and tested to be compatible with the eafliest to latest
vehicles available throughout the world. Our primary goal was to
provide a reliable and stable product. Our secondary goal was to
ensure that our systems are easy to install. Our final goal was to
provide features that would benefit the user and installer. We are
confident that our products will meet and exceed your expectations,
We are constantly working to research, design, and build next
generation products. We would not expect anything less since we
use our products in our own vehicles.
CAUTION!
PLEASE READ CAREFULLY
The user and installer should completely read the User Manual, In-
stallation Manual, and the vehicle’s manual completely before install-
ing and operating this system. Not reading the manuals completely
may result in injury or damage to the user(s), installer(s), and/or the
vehicle. Installation and use of this system is acknowledgment that
the user and installer have fully read the manuals and indemnify
Zenesis Alarms from any injuries or damages resulting from wrong
use of our system. Please take the following precautions.
99.39.“
. When using remote start, place the gear in Park(P)
(automatic transmission) or Neutral (manual transmission)
and set the parking brake (emergency brake)
The transmission (Tx) and reception (Rx) distance will vary
from interference from other radio signals.
If any defects are discovered, do not open or attempt to re-
pair the system, Ask the installer for assistance.
Zenesis Alarms will not be responsible for any theft and/or
damages to your vehicle.
The installer of this system will be responsible for any injuries
and/or damages resulting from incorrect installation.
The user of this system will be responsible for any injuries
and/or damages resulting from misuse,
CONTENTS
1. Introduction
1.1
1.2
1.3
1.4 Remote Control Button Introduction (Primary/Secondary)
System Contents
Remote Control Button Layout
LCD Display Introduction
2. Primary Features
2.1
2.2
2.3
2.4
2.5
2.6
Door Lock (Arm)
Door Unlock (Disann)
Ann I Disarm Status (50A150AS)
Remote Stan (505 / SOAS)
Trunk Release
Valet Mode
3. Secondary Features
choximmuww-n
we
_._.
N—‘Q
3.13
3.14
3.15
3.16
3.17
User Programmable Options
Remote Control Registration
Remote Start Reservation (505 I SOAS)
Temperature Status (50A / SOAS)
Paging (50A / SOAS)
Remote Control Beep Mute
Siren Mute (50A / SOAS)
Passive Lock (Arm)
Safety Relock (Reann)
Ignition Lock
Cold Start Timer (505 / SOAS)
Turbo Timer (505 / 50AS)
Option 1 Input
Aux 1 Output
Aux 2 Output
Shock Sensor (50A l SOAS)
Shock Sensor Sensitivity (50A I 50AS)
4. Factory Reset
5. Notes
6. Warranty Card
(DONG?
11
11
12
12
12
13
13
15
16
16
17
17
1B
18
18
19
19
19
20
20
20
20
21
21
21
23
1. INTRODUCTION
System Contents
Remote Control Button Layout
LCD Display Introductlon
Remote Control Button Introduction
“nun;
1.2 Remote Control Button Laxout
517 P f
Front Side |
it:
Antenna
Right Side
Back Side
2-wny Remote Control
Specifications
120 ppm/year
- 40'0 ~ +80'C
mm
1.3 LCD Display instruction
CAUTION
NEVER use the system except
for its intended use. This is an
electronic system with complex
circuitry. Avoid dropping the
components or cause any other
physical damage as that will
void the warranty,
Antenna
Vibration
Door Lock/Unlock
Time.Turbo. Reserve
Remote Start Status
Run Auto Lock
Cold Start Timer
Temperature
Siren ON/OFF
Shock ON/OFF
Function Stop
Auto Ann Set
Auto Rearm Set
Light ONIOFF
L4 Romote Control Button Introduction
Button(s) Duration Descri tion
0.5 nor: Door Lock lArm
0.5 see Door Unlock / Disarm
0.5 aec LCD Display Status
0.5 u: Panic
0.5 sec Valet Mode ONIOFF
2 sec Emergency Siren
2 see Remote Start
2 see Trunk Release
4 let Time, Time Alarm, Remote Stan Reservation Timer
0.5 u: Remote Control Registration (Normal)
0.5 see Remote Control Registration (Door lock atter remote start)
0.5 oer: Rmote Control Beep Mute ON/OFF
0.5 sec Siren Mute ONIOFF
0.5 sec Aux 2
0.5 u: Aux 1
1 us User Programmable Options
sec Auto Arming ONIOFF
u: Paging ONIOFF
sec Passive Lock (Arm) ONIOFF
sec Safety Relock (Rearm) ONIOFF
u: Shock Sensor ONIOFF
sec Ignition Lock ONIOFF
nee Turbo Timer ONIOFF
hhbabh.
- (2 sec) 1xBeep. Remote Control Tx/Rx
(Ann) 2xBeep, Remote Control Tx/Rx
+ Push 2 Button- alums time
2.1mm
Successful door lock (arm) ©°JS€°
Failed door lock (disarm) can occur ifa door, hood and/ortrunk is 0 en.
JE
Ifthe trunk and/or hood is open while arming (EDA/SOAS), the siren
will sond immediuately. Ifa door is open while arming (SOAEUAS),
the siren will sound alter 45 seconds.
NOTE: Since the doors cannot be locked and the system cannot be armed (GOA/SEAS)
while the hood and/ortrunk is open, ensure that the hood and trunk are closed
before locking I arming.
2.2 Door Unlock (Disam) 2 dill-HOG
Successful door lock (arm
3 E x mm a 2 beans
.3 Arm / Dlnrm Status AI SIMS
Disarrred Mode
| Triggered Ahm
Aflerthe alarm is triggered.
Hlét -> This button will stop the siren from sounding. 5 siren chirps and fast LED flashes
(Ulfllé) on the antenna module will confirm button press.
Elli—1.2 -> This button will stop the siren from sounding. The system will be disarmed with 2
(UlDIE) siren chirps. The LED on the anttenna module will flash quickly.
Door open and close -> The LED on the antenna module will stop flashing,
HES! -> This button will start the siren from sounding. The system will be rearmed with 1
(UlOIE) 1 siren chirp. The LED on the antenna module will flash.
The siren duration can be programmed through the User Programmable Options.
a Remote Start fills I 50A§1
Successful remote start
‘J' W
Failed remote start
Key in key cylinder at ON
-osition
Open door
Oen hood and trunk
Failed remote start
reservation
1 parking light flashes &1 siren chirps
3 parking light flashes &3 siren chirps
4 Harkin Iiht flashes &4 siren chirs
7 parking light flashes &7 siren chirps
3 x beep
o ltthe OlUIEUta) button Is pressed tor 2 seconds whlle remote start is on. remote start
will turn off.
0 The default remote start engine runnlng timer Is 5 minutes. The time can he changed
through the User Programmable Options,
CAUTION: Do not use the remote start features ofthe vehicle is on an enclosed area.
Do not use the remote start feautre where laws prevent its usage.
Do not turn the key to the start postion or elase damage may (emergency brake)
is always engaged.
umeuumflzgs
Trunk release will unloc
the s stem.
The system will be disarmed when trunk release.
2&3 OiDIE will be deleted when rearmins atter trunk close or when press rumors for [15 sec.
NOTE: On manual transmission vehicles, trunk release will turn off remote start
2 5 Car Find a Status In 0.5 m:
Normal status
Abnormal status
Status can be checked, - 4 beeps. remote control
Door open Hood open Trunk release
4 “a. “13:35 “a- New 7. “a. .. 13:30
Remote start Shock Indicate Option 1 occurred
-- 1885 Y; a - .. 13:30 ‘fnl 5": - map - l
w, _ ‘ "; -
"k .-,k
When press I." | buttons the system will be back to normal mode
Car must be within the distance that Tx and Rx can be reached
lawm—
When you enter programming mode by holdingmmfor 2 seconds, the LED Backlights will blink
1 time and the remote control will beep 1 time. The parking lights will flash 1 time and the siren
will chirp 1 time. You are now in programming mode. Follow the chart below for programming options.
Remote start run time | II c w (2 sec) " W " | " 3 min. Resetting
Diesel warm up time | II f w (2 sec) — 4 sec as the 1st
Siren sound time | ll 0 m (2 sec) — N — I 30 sec one
Turbo timer run time | II 4 N (2 sec) — u - N — 2 min.
Remote start resewation(ManuaI)| u o w (2 sec) - automatic
Regular remote start timer | 1 hour
Shock sensor ONIOFF | ON
Cold start timer Fahrenheit
3.2 Remote Control Registration
Open driver' side door.
Press the key into the key cylinder and turn to the ON postion.
Press fook break 5 times.
3 parking light flashes and 3 siren chirps will conflmr remote control
programming mode.
5, Press the appropriate button(s) forEl.5 sec. As belows.
“1-0th
Remote Control Registration (Normal)
--> I+II |
Remote Control Registration (Door lock after remote start)
--> I“!
6 After remote control registration, 2 blinks and 2 beeps from the remote
control and 2 parking light falshes and 2 siren chirps Will sound.
Up to 3 remote controls can be added to each system.
7 Once the kkey is turned to the OFF postion or 10 seconds have passed
without adding a remote control, the system will exit remote control
registration mode.
NOTE ' Each time a remote control is added. all remote contorls
must be re-registered to the system. Adding a remote control
erases pewiously stored remote controls from the system.
3.3 Remote Start Reservation
Manual transmission vehicles require remote start reservation in orderto
ensure that the vehicles is properly prepared for remtoe start There are
2 remote start reservation modes : automatic and manual. Please note that
automatic and manual do not referto the transmission type. Rather,
automatic and mauhaul referto the type of remote start reservation,
A) Automatic Remote Start Reservation (Default)
1) Before truning offthe enigine, put the transmission into Neutral, Ensure
that the parking brake (emergency brake) is engaged. Take foot oflthe
foot brake.
2) Turn the key to the OFF position The engine should still be running,
3) Exit the vehicle within 2 minutes.
4) Once the last door is closed, the enigne will tur off.
6) Lcok (arm) the system Remote start is ready to be used.
8) Manual Remote Start Reservation
) Before turning oft'the engine, put the transmission into Neutral Ensure
that the parking Brake (emergency brake) is engaged. Take foot oflthe
foot brake.
Press || button for 2 seconds.
Turn the key to the OFF position. The engine should still be running.
EXit the vehicle within 2 minutes.
Once the last door is closed, the engine will turn oifl.
Lcok (arm) the system. Remote start is ready to be used.
93588
NOTE: Remote start reservation type can be changed through the user
Programmable Options.
WARRANTY CARD
Use this warranty card for your records.
Please go to www.signca.com to fill out the warranty details.
\fisit the link above for specific warranty terms and conditions.
Model Number
Owner‘s Name
Owner’s Address
Owner‘s Phone
Date of Purchase
Date of Install
Retailer Name
Retailer Address
Retailer Phone
Installer Name
Installer Address
Installer Phone
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions ;
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Product Information
Remote control
M/N: ALC-502
FCC |D:WJ3ALC-502

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2009:01:14 16:58:03+09:00
Modify Date                     : 2009:01:14 17:09:19+09:00
Metadata Date                   : 2009:01:14 17:09:19+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:F1539A0311E2DD11A22B95A49C9A309B
Instance ID                     : uuid:1afd8390-bcbe-4e08-8e93-cec1b02e90c0
Derived From Instance ID        : uuid:06f41742-4d4b-4031-8a41-9a6c0d4baece
Derived From Document ID        : uuid:f9702dfb-db23-4906-bf10-be78d5223fc6
Format                          : application/pdf
Title                           : 사본 - LC50SeriesManual(user).pdf
Creator                         : ghpark
Has XFA                         : No
Page Count                      : 13
Author                          : ghpark

EXIF Metadata provided by EXIF.tools