Bighouse Electronics Commerce HWYX-01 Bluetooth Speaker User Manual 15 HWYX 01 UserMan

Shenzhen Bighouse Electronics Commerce Co., Ltd Bluetooth Speaker 15 HWYX 01 UserMan

15_HWYX-01 UserMan

01 Safety Instructions1. Please read and follow the instructions; 2. Store and use the product at normal temperature environment;3. Do not use the product near water; do not immerse this product in any liquid or drop or splash any liquid on this product; 4. Do not use the product near the heat source, such as heat sink, air conditioner, stoves, or other instruments that can generate heat (including amplifiers); 5. Do not block the mouth of loudspeaker or stuck objects into the vents or slot; 6. Do not throw the product in case of damage from falling; 7. Please charge with charger complying with affordable power of loudspeaker; 8. Please adjust the loudspeaker to the appropriate volume, in order to avoid hearing impairment; 9. Please ask professional maintenance staff to repair in time regardless what the damage result from; unauthorized repair will make the warranty invalid.M mode key: Bluetooth mode, TFcard mode (need to insert TFcard), external-drive sound source mode (connecting audio line)Prev/V-:Short press to back to the previous track; long press to decrease volume. Next/V+: Short press to the next track; long press to increase volume.Play-Pause/Call: Short press the Play button to Pause Music; Short press to pick up, hang up in coming call; Long press to decline a call.Power: Press for 2 seconds to turn on/offBluetooth indicator03 Button Function Description08 Problem solution07 Technical ParametersType Portable Bluetooth loudspeakeractive/passive activeAdjust method ButtonsStorage type Maximum capacity of 128G TF card supportiveBattery Built-in 3600mAh lithium batteryWireless connection way Bluetooth100mm210mm75mm05 LED IndicatorMicroUSB interface: Connect the USB DC5V power adapter or charge in USB port.AUX-IN interface: Connect audio line and voice prompts Line-in. Loudspeaker will automatically switch to the mode of external-drive sound source.TFcard: Insert the TFcard in state of power-on and voice prompts Music. The loudspeaker will automatically play the music within the TFcard. If necessary, short press the M button can switch to other modes.USB charging port: The output supply current is 5V 1A, applicable for phone charging.The built-in reset key can restart system by pressing with thin bar. 04 Interface Function DescriptionBluetooth searching for matching Turn on the loudspeaker and find the Setting to turn on the Bluetooth. Click the Aptoyu-02 in the list to start connection. When connection succeeds, theBluetooth lamp remains on and voice prompt can be heard.NoticeWhen the loudspeaker is turned on, it will automatically connect to the last connecting equipment before it turned off last time (only the Bluetooth remains open). No need to researching.06 Bluetooth audio connectionBluetooth indicator: The Bluetooth lamp flickers when waiting to be connected; the Bluetooth lamp remains on when the connection succeeds. Electric quantity indicator: The lamps flicker successively on battery charging; battery needs to be charged on low electric quantity. 02 Host and accessoriesInstructionsInstructions3.5mm audio lineMicroUSB power cordLoudspeaker hostpouchInstructionsAPTOYUBluetooth SpeakerHWYX-01
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC statement

Navigation menu