2015 BMX EN
2015-03-09
: Bike Guide 2015 Bmx En 2015_BMX_EN_ 15bike manuals
Open the PDF directly: View PDF 
.
Page Count: 13
| Download | |
| Open PDF In Browser | View PDF |
www.scott-sports.com All rights reserved © 2014 SCOTT Sports SA SCOTT Sports SA | 17 Route du Crochet | 1762 Givisiez | Switzerland Distribution: SSG (Europe) Distribution Center SA P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | Belgium V4. 3/ 19012015 SCOTT BMX BIKE OWNER’S MANUAL 2015 ENGLISH ENGLISH CONTENTS Bicycle Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 www.scott-sports.com Saddle Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Chain Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Congratulations on your purchase of a new SCOTT bicycle! We are confident that the bicycle will exceed your expectations for value, performance, and ride quality. Each frame set and component has been carefully selected and designed to enhance your riding experience. Whether you are a beginner cyclist, or a seasoned pro, SCOTT bicycles will provide endless hours of two‑wheeled fun. We strongly recommend you take the time to read this manual and familiarize yourself with your new bicycle. If you have purchased a bike for your child, please take the time to ensure they understand the safety information contained in this manual. Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Tires and Rims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09 Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Maintenance and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Bicycle Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Tightening Torques for SCOTT Bikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Parts of Wear and Tear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 SCOTT Service Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 02 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 03 IMPORTANT! If you purchased this bicycle for a minor, it is essential that a responsible adult thoroughly reads and explains the safety instructions in this manual to the minor. Please ensure your SCOTT bike is completely assembled by your authorized SCOTT dealer. This ensures that your bike is correctly set up to optimize safety, performance and fun while riding. It is important to understand the basics of and exercise common sense when cycling. Cycling is a dynamic sport that requires awareness of and reaction to various situations and surroundings. Like any sport, cycling involves risks of injury and damage. By choosing to ride a bicycle, you assume the responsibility for those risks. SADDLE HEIGHT ENGLISH ENGLISH BICYCLE SAFETY Comfortable riding depends on the position and height of the saddle. You can adjust the saddle height by: 1. Straddle the saddle. Place the ball of your foot on the pedal nearest to the ground. Make sure the cranks are vertical. 2. If the heel of your foot points down about 30 degrees, the saddle height is correct. CAUTION! Ensure that the limit marking on your seat post is inside the seat tube. If it is not possible to reach the correct seat height, you will need a larger size. Please use your bike only for the purpose it was made for. Ensure that the seatpost marking is inserted into the frame. If you need to change the inclination of the saddle or the horizontal position, ensure you do not exceed the max. tightening torque. For instance, a road racing bike should not be used as a substitute for a mountain bike in off road terrain. Nor should a Trekking bike be used for downhill racing or road racing. Screws with M5 should be tightened with 6 Nm, and M8 with 20 Nm. If you have any questions regarding your new SCOTT bicycle, please contact your authorized dealer. Ensure the saddle is installed correctly with the seat post before every ride. Ride Frequently! Please note that SCOTT is not responsible for damages caused by neglecting the tightening torques on the seatclamp fixing screws. IMPORTANT! 1. Obey all traffic laws. Use proper signals when turning. Never tow yourself behind another vehicle. Do not weave or race in traffic. 2. Watch out for parked cars. A car door can open or a car can pull out into traffic at any time. CHAIN TENSION 3. Always ensure you are highly visible. Wear bright colors, install reflectors properly and use lights at night. 4. Always wear a helmet. Ensure the helmet meets or exceeds national safety standards. 5. Ensure that your bicycle is in good working condition before every ride. Check your brakes, tires, components, etc. 6. Ensure that the bike is the right size. The rider should be able to reach the brake levers properly. 7. Never have two people on a bicycle designed for one. Except specially designed and properly installed child carriers. If the chain needs to be tensioned again, release nut A on both sides and pull the rear wheel straight backward until the tension is ok. Retighten nut A on both sides. Please note the tightening torque in the Tightening Torques table at the end of this manual. A 8. Mount loads securely. Never mount anything that interferes with brakes or vision. 04 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 05 -- Finally make the fine tuning with adjustment screw B as mentioned above. The wheel needs to spin free without touching the brake pads. Fix counter nut A. GENERAL BRAKE ADJUSTMENT ENGLISH ENGLISH BRAKES IMPORTANT! Your SCOTT bike is fitted with a reliable and well-functioning braking system, provided the brakes are correctly adjusted. Check by measuring the distance between the brake shoes and the rim: it should be 1.5 to 2 mm. Make sure that the brake works perfectly. IMPORTANT! Cable connection and adjustment of the (Dual Pivot) brake 1. Put the quick release lever in the closed position. 2. Adjust the brake shoe clearance (as shown in the illustration) and secure the cable with the pinch bolt nut. Cable bolt tightening torque 6-8 Nm Under wet conditions the brake performance can decrease which will result in a prolongation of the braking distance. centering adjustment bolt 3mm allen key open V-BRAKE A B closed quick release lever A + B =3-4mm 2 1 2 1. While holding the shoe against the rim, tighten the shoe fixing nut. 2. Pass the inner cable through the inner cable lead, and after setting so that the total of the clearances between the left and right shoes and the rim is 2 mm tighten the cable fixing bolt. 1 HOW TO CHANGE BRAKE PADS tightening torque : 6-8 Nm (52-69 in. lbs.) inner cable lead 5mm allen key B C B + C = 2 mm 1. Loosen the security screw with a 2 mm allen key. 2. Push the used brake pad out of the aluminum brake shoe. 3. Adjust the distance with the spring tension adjustment screws. 3. Push the new brake pad into the brake shoe, according to the arrow showing the mounting direction. 4. Tighten the security screw to approximately 1.5 Nm. -- Close the caliper brake with your hand to the rim, adjust the brake cable and tighten clamping screw C. Please note the Tightening Torques table at the end of this manual. 06 BMX | BIKE OWNER’S MANUAL 2015 1 Spring tension adjustment screw CALIPER BRAKE Release counter nut A and turn adjustment screw B counter clockwise until the distance between brake pads and rims is approx. 2mm on each side. Tighten counter nut A. -- If the adjustment screw B is released already to the limit, then release cable clamping screw C and turn adjustment screw clockwise to its original position. 2 2 Spring tension adjustment screw 1 1 1 mm 2 1 mm 4. Depress lever about 10 times Depress lever about 10 times B A C BIKE OWNER’S MANUAL 2015 | BMX 07 Remove the shoe fixing pin shoe fixing pin ENGLISH ENGLISH TIRES AND RIMS Replacement of the brake pads/cartridge shoe Tires should always be inflated within the manufacturer’s recommendations. They are rated from 40 to 80 lbs. (check your tires). Higher pressure for smoother roads or heavy riders. Lower pressure for more shock absorption on rougher terrains. For example: Remove the shoe by sliding it along the groove of the shoe holder INFLATE TO MIN. 3.5 (50PSI) - MAX. 6.0 BAR (85PSI) shoe RIM AND WEAR OF THE RIM If the brake system has brake pads, please be aware that the rim will become worn through the action of braking. When riding in wet and muddy terrain, for example, the rim is quickly worn out. Make sure to use the correct brake pad and brake shoe for each side. Those for the left side are different from those for the right side. Slide the new pad into the shoe and make sure that the direction is correct and that the security pin holes concord. for the left for the right same at front and rear The appearance of small cracks or deformation of the brake surface on the rim when increasing the tire pressure indicates increased wear of the rim. If this occurs, the rim should be replaced immediately at an authorized dealer. SCOTT bikes that are fully equipped (lights, mudguard, carrier) have a wear‑out‑indicator. Please follow the instructions of the rim manufacturer shown in the manual or on the rim itself. same at front and rear front front shoe shoe shoe holder shoe holder shoe insertion direction shoe fixing pin shoe fixing pin Insertion of shoe fixing pin is very critical to keep shoe properly fixed in place 08 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 09 Bicycle wheels are designed to be removable for easier transportation and for repair of a tire puncture. In most cases, the wheel axles are inserted into slots, called “dropouts” in the fork and frame, but some suspension mountain bikes use what is called a “through axle” wheel mounting system. If you have a mountain bike equipped with through axle front or rear wheels, make sure that your dealer has given you the manufacturer’s instructions, and follow those when installing or removing a through axle wheel. If you don’t know what a through axle is, ask your dealer. Hex nuts or hex key bolts which are threaded on to or into the hub axle (bolt-on wheel, fig. 10) Your bicycle may be equipped with a different securing method for the front wheel than for the rear wheel. Discuss the wheel securing method for your bicycle with your dealer. It is very important that you understand the type of wheel securing method on your bicycle, that you know how to secure the wheels correctly, and that you know how to apply the correct clamping force that safely secures the wheel. Ask your dealer to instruct you in correct wheel removal and installation, and ask him to give you any available manufacturer’s instructions. FRONT WHEEL SECONDARY RETENTION DEVICES ENGLISH ENGLISH WHEELS Most bicycles have front forks which utilize a secondary wheel retention device to keep the wheel from disengaging if the quick release is incorrectly adjusted. Secondary retention devices are not a substitute for correct quick release adjustment. Secondary retention devices fall into two basic categories: 1. The clip-on type is a part which the manufacturer adds to the front wheel hub or front fork. 2. The integral type is molded, cast or machined into the outer faces of the front fork dropouts. Ask your dealer to explain the particular secondary retention device on your bike. WARNING! Do not remove or disable the secondary retention device. As its name implies, it serves as a back-up for a critical adjustment. If the quick release is not adjusted correctly, the secondary retention device can reduce the risk of the wheel disengaging from the fork. Removing or disabling the secondary retention device may also void the warranty. Failure to properly adjust the quick release mechanism can cause the wheel to wobble or disengage, which could cause you to loose control and fall, resulting in serious injury or death. FIXING A FLAT TIRE Bike tires are fitted with tubes. Remove the wheel from the bike and deflate it. Unhook the tire from one side of the rim using tire tools. Do not screwdrivers. Remove the tube from the tire casing, repair or replace it. Install the new or repaired tire. Fill the tube lightly with air in order to let it take its shape. Put the valve stem through the hole, and fit the inside tire. Put the tire bead in the rim starting at the valve and finishing at the opposite end, working on both sides. Push the valve stem into the tire and pull it back down to seat. Make sure the tube is not pinched under the tire bead. Inflate with hand or foot-pump. Close the brake’s quick release system carefully. USE OF A BICYCLE HAULER SCOTT bikes are not intended to be used with haulers (load-haulers, kids-haulers, Trailer bikes). Please note that SCOTT will not take any warranty or responsibility when using a hauler. There are too many different haulers and hauler fixation systems on the market to give a detailed table of systems that might fit without technical problems or endangering the passengers. 10 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 11 SCOTT bikes such as Racing Concept, Racing, Endurance, Progressive, Road, Roadster and Kids Series are not intended to be used with baby seats. Please note that SCOTT will not take any warranty or responsibility when using a baby seat on bikes mentioned above. There are too many different baby seat and baby seat fixation systems on the market to give a detailed table of systems that might fit without technical problems or endangering the passengers. ASSIGNMENT OF BRAKE LEVERS TO FRONT AND REAR BRAKE In general SCOTT bikes are delivered and preassembled with the right lever matching the rear brake and the left lever matching the front brake. MAINTENANCE AND CARE MAINTENANCE SCHEDULE Please be aware that you must follow the list of maximum tightening torques for screws at the end of this chapter. CHECK BEFORE EVERY RIDE: -- All bolts and nuts, especially the quick releases of the wheels for proper fit. If they are loose tighten them according to the maximum tightening torque. -- Stem and handlebar for visible damage and replace them if necessary. Ensure that the bolts are tightened evenly when closing the front cap according to the tightening torque recommended by the producer of the parts. Due to national laws this may have been changed by your SCOTT dealer to fulfil the national laws. -- Braking systems. Please ask your dealer to explain to you the assignment of the brakes and brake levers when handing over the bike. -- Light systems and bell. MAXIMUM WEIGHT AND LOAD OF SCOTT BIKES SCOTT mountain bikes are intended for a maximum rider weight of 110 kgs, the overall weight of bike including rider should not exceed 119-128kgs (depending on bike weight). ENGLISH ENGLISH USE OF A BABY SEAT -- Air pressure of the tires according to the recommendation of the producer. -- Handlebar grips to be fixed to the handlebar. -- All parts of the rear suspension system including mounting bolts. -- The front suspension fork on perfect function and play in the bushings. CHECK ADDITIONALLY EVERY MONTH SCOTT trekking bikes are intended for a maximum rider weight of 110 kgs, the overall weight of bike including rider and a maximum load of 25kgs should not exceed 143-150kgs (depending on bike weight). -- Front and rear derailleur for perfect function and grease them. Readjust the system and clean it if necessary. SCOTT road bikes are intended for a maximum rider weight of 110 kgs, the overall weight of bike including rider should not exceed 117-120kgs (depending on bike weight). -- Brake and shifting cables on perfect wear and leakage on hydraulic systems. Grease the cables if necessary. -- The play of the headset. Readjust it if necessary. SCOTT kids bikes are intended for a maximum load of 50 kgs including rider and load. Please always follow the information of the component suppliers regarding the maximum rider weight. USE OF SCOTT BIKES IN PUBLIC TRAFFIC Please follow the national laws concerning the use of equipped and non-equipped bikes in public traffic. For example, reflectors and light systems. 12 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 13 -- Chain wear and tension (on bikes equipped with internal gear hubs). Readjust if necessary, clean and grease the chain. -- Bottom bracket cartridge for play, replace it if necessary. -- Pedal bearings for play, replace them if necessary. -- Front and rear derailleur for perfect function and grease them. Readjust the system and clean it if necessary. -- Stem and handlebar for visible damage and replace them if necessary. Ensure that the bolts are tightened evenly when closing the front cap, according to the tightening torque recommended by the producer of the parts. -- Complete brake system on perfect function and readjust and grease it if necessary. Replace worn out or defective parts. Replace leaking hydraulic pipelines at once . -- Rims and tension of spokes. If necessary true them. -- Air pressure of the tires according to the recommendation of the producer. BICYCLE CARE ENGLISH ENGLISH CHECK WHEN NECESSARY OR AT LEAST ONCE A YEAR AT YOUR LOCAL DEALER We recommend periodical care in order to keep your bike functioning well and in good condition. Doing so maintains the value of the bike and helps to prevent corrosion or other damages. -- Clean using a soft brush, water and soft towel. Do not use a high pressure cleaner, otherwise bearings, colors or decals may become damaged -- Do not use aggressive cleaning substances -- Repair any damage to the paint immediately -- Grease or oil all metal parts especially during winter use Please use biodegradable bicycle cleaners and degreasers which are available from your local SCOTT dealer. -- Overall condition of the tires. -- Light systems and bell. -- Handlebar grips to be fixed to the handlebar. -- All parts of the rear suspension system including mounting bolts. -- The front suspension fork on perfect function and play in the bushings. -- Frame and fork on perfect condition, replace if damaged. SPARE PARTS FOR YOUR SCOTT BIKE When buying spare parts we strongly recommend visiting your local SCOTT dealer as they will be best equipped with the knowledge, advice and specific parts that are correct for your bike. By doing so you can avoid using wrong or incorrectly installed parts that could damage your bike or cause personal injuries. This is extremely important on parts of the brake system, the tire and air tube. Please only use original spare parts as only these can guarantee optimum function and safety while riding. Please note that SCOTT is not responsible for damages caused by not using original spare parts. Never use adapter solutions on parts such as brakes, seat/seatpost, stem/handlebar! 14 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 15 PART Rear Derailleur MOUNTING BOLT -- Mounting bolt -- Cable fixing bolt -- Pulley screws MAX. TORQUE 7.8-9.8 Nm 3.9-5.9 Nm 2.9-3.9 Nm TROUBLE REASON SOLUTION Fork Shakes Headset Loose Tighten and Lock Chain Pops Out -- Derailleurs Not Adjusted -- Adjust According to Manual -- Chainwheel Bent -- Fix or Change Front Derailleur -- Clamp -- Cable fixing bolt 4.9-6.8 Nm 4.9-6.8 Nm -- Bottom Bracket -- Replacement Rapidfire lever -- Clamp mounting bolt 4.9-6.8 Nm -- Pedals Need Grease -- Dismount, Clean, Grease STI -- Clamp mounting bolt 4.9-6.8 Nm -- Hubs Need Grease -- Dismount, Clean, Grease Brake lever -- Clamp mounting bolt 4.9-6.8 Nm -- Bottom Bracket -- Replacement Freewheel hub -- Freewheel body -- Cassette fixing nut 35-49 Nm 30-49 Nm -- Pedals -- Tighten and Lock Crankset -- Square type -- Spline type -- Chainring screws 35-45 Nm 35-50 Nm 7.8-10.7 Nm -- Hubs -- Tighten and Lock Handlebar Cracks, Shakes Stem Or Handlebar Bolts Are Loose or Turn Tighten All Bolts and Nuts 50-70 Nm Seat Post Turns or Slides -- Quick Release is Loose -- Retighten and Lock -- Seat Post Diameter Too Thin -- Check Diameter -- Bottom Bracket Loose -- Tighten Bottom Bracket -- Not Adjusted -- Adjust -- Chainwheel Bent -- Fix or Change BB-Cartridge Pedals Bearings Squeak or Crack Bearings Are Loose 40 Nm Stem Mounting bolts -- M5 -- M6 5.6-7.8 Nm 9.8-13.7 Nm -- M4 -- M5 -- M6 2.8-3.9 Nm 5.6-7.8 Nm 9.8-13.7 Nm V-Brake -- Frame mounting bolts -- Cable fixing bolt -- Brake pad bolts 5-6.8 Nm 5.8-7.8 Nm 5-6.8 Nm Caliper Disc brake ----- Magura Shimano Formula Hayes 6 Nm 6-8 Nm 9 Nm 12 Nm Disc mounting bolts ----- Magura Shimano Formula Hayes 4 Nm 2-4 Nm 6.2 Nm 5 Nm Seatpost-seatclamp 16 TROUBLESHOOTING ENGLISH ENGLISH TIGHTENING TORQUES FOR SCOTT BIKES BMX | BIKE OWNER’S MANUAL 2015 Front Derailleur Rattles Suspension Fork is Loose Contact Your Local Dealer Rear Suspension is Loose Contact Your Local Dealer BIKE OWNER’S MANUAL 2015 | BMX 17 WARRANTY What is Covered? How Do You Make a Claim Under This Limited Warranty? This warranty covers defects in materials and workmanship at the time of transfer of risks in frames, swingarms and forks (provided it is a fork of SCOTT) on SCOTT branded bikes sold completely assembled by SCOTT or an authorized SCOTT dealer (“Product”). To make a claim under this limited warranty, you must notify SCOTT of the claimed defect within the warranty period and timely return the Product to SCOTT at your expense for inspection. Please contact your authorized SCOTT dealer, call SCOTT’s customer service or the national SCOTT distributor (dealer locator: www.scott‑sports.com). All returned Products must be accompanied by proof of purchase (receipt) from an authorized SCOTT dealer or this limited warranty will not apply. In case of replacement or refund, returned Product becomes the property of SCOTT. How Long Does Coverage Last? This voluntary manufacturer’s warranty is limited to five years for frames and swingarms, respectively two years for forks, from the date of purchase of the Product and is limited to the first purchaser of the Product. Transfer of the Product from the first purchaser to another person terminates this limited warranty. The limited warranty of five years for the frames and swingarms shall only be granted in case once a year a maintenance service has been effected according to maintenance requirements as set forth in the manual. The effected annual maintenance service shall be confirmed by stamp and signature. In case such an annual maintenance service has not been effected the warranty of five years for the frame shall be reduced to three years. Costs for maintenance and service have to be borne by the owner of the Product. On Gambler, Voltage Fr and Volt-X the warranty period is limited to two years. Repaired or replaced Products are covered for the remainder of the original warranty period and subject to the conditions outlined in the original warranty, to the extent permitted by law. Hereby SCOTT grants a worldwide voluntarily manufacturer’s warranty. To the extent permitted by law and unless a shorter duration is stipulated by law, any warranties implied by law are limited in duration to maximum five, respectively two years, from the date of purchase of the Product and are limited to the first purchaser of the Product. ENGLISH ENGLISH WARRANTY A protocol for the handing over of the Product (which you will find at the end of the manual) will remain in copy at the SCOTT dealer after acceptance and signature of the consumer. It is obligatory to show this protocol of handing over together with the defective part in case of a warranty claim given that it provides evidence of purchase or this limited warranty will not apply. How Do State Laws Affect Your Rights Under This Limited Warranty? This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Recommendation We strongly recommend that you use only authorized SCOTT dealers for yearly maintenance services and for repairs, as improper or incorrectly performed maintenance or repairs voids this limited warranty. Costs for maintenance service have to be borne by the consumer. What Will SCOTT Do? SCOTT will replace by similar kind and quality or repair any defective Product, or will refund your purchase price (as evidenced by your tendered receipt of purchase of the Product), at SCOTT’s option. You must pay charges in connection with replacement of any non-defective parts. In such a case, you will be alerted to the advisability of replacing non-defective parts, so you can pre-authorize the costs. What Does This Limited Warranty Not Cover? This limited warranty does not cover defects which did not exist before the transfer of risks. This limited warranty does not cover Products used in rental operations. This limited warranty does not cover purchases of not completely assembled bikes. This limited warranty does not cover any defect caused by “wear and tear” (a complete list of all parts of “wear and tear” can be found in the manual), accident, neglect, improper handling, abuse, misuse, an act of God, improper assembly, non-compliance with recommended maintenance and care procedures, improper or incorrectly performed maintenance or repairs performed by someone other than an authorized SCOTT dealer, use of parts or devices not consistent with the Product, and alteration of the Product. All Products come with a manual; please carefully follow the instructions located there or affixed elsewhere to the Product. To the extent permitted by law, consequential and incidental damages are not recoverable under this limited warranty. 18 BMX | BIKE OWNER’S MANUAL 2015 5 SCOTT Bikes Gambler, Voltage FR, Volt-X BIKE OWNER’S MANUAL 2015 | BMX 19 PARTS OF WEAR AND TEAR ARE EXCLUDED FROM ANY WARRANTY. TIRES The tires are subject to wear and tear due to their use. The extend of the wear and tear depends on the maintenance and conditions the bike is subjected to and is influenced by the owner's riding style. ENGLISH ENGLISH PARTS OF WEAR AND TEAR Aggressive braking will reduce the lifetime of the tire dramatically. CHAIN The chain is subject to wear and tear due to its use. The extend of the wear and tear depends on the maintenance and conditions the bike is subjected to (amount of kilometers, rain, dirt, salt, etc.). Cleaning and greasing will help to prolong the life of the chain but it is the responsibility of the owner to replace the chain when reaching the wear limit. In addition, check the air pressure regularly and inflate the tire according to the pressure recommended by the producer of the tire which is imprinted on the sidewall of the tire. LIGHT SYSTEMS AND REFLECTORS SPROCKETS, CHAINRINGS AND PULLEYS A well functioning light system is incredibly important for your riding safety in public traffic. Before every ride check your front and tail lights and the condition of the reflectors. Light bulbs are subject to wear and tear and we recommend taking replacements with you in case of failure. The sprockets, chainrings and pulleys are subject to wear and tear due to their use. The extend of the wear and tear depends on the maintenance and conditions the bike is subjected to (amount of kilometers, rain, dirt, salt, etc.). HANDLEBAR GRIPS Cleaning and greasing will help to prolong the life of the sprockets, chainrings and pulleys, but it is the responsibility of the owner to replace them when reaching their wear limit. Handlebar grips are subject to wear and tear due to their use and should be replaced immediately if they no longer fit to the handlebar or become loose. HANDLEBAR, STEM AND SEAT POST SHIFTING AND BRAKE CABLES The handlebar, stem and seat post are subject to high dynamic forces while riding. All cables must be checked regularly and changed if necessary. Cables may need to be changed more regularly if the bike is often left outside or exposed to weather. Please check these parts regularly for visible cracks or damage and replace them if necessary. BRAKE PADS In addition, we recommend a periodical replacement (every two years) of these parts if you ride often and hard. All brake pads, whether they are rim-brakes, disc-brakes or internal brakes, are subject to wear and tear due to their use. The extend of the wear and tear depends on the maintenance and conditions the bike is subjected to (amount of kilometers, rain, dirt, salt, etc.). Check your brake pads regularly and replace them if necessary. RIMS When using rim brakes, not only are the brake pads subject to wear and tear, but also the rim. So regularly check the rims, e.g. when inflating the tires. If you see small cracks or deformation in the brake surface of the rim while inflating the tires, then replace the rim immediately. Rims with wear-out indicators enable the bike user to easily check the condition of the rim. Refer to the sticker on the rim. 20 BMX | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | BMX 21 SCOTT SERVICE PLAN Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date of purchase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date of purchase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Annual service to be done Annual service to be done -- Check of shock mounts incl. lubricating the bushings -- Check of shock mounts incl. lubricating the bushings -- Check of swingarm pivot incl. axle and mounts -- Check of swingarm pivot incl. axle and mounts -- Check of rear shock according to the enclosed shock manual -- Check of rear shock according to the enclosed shock manual -- Check of hubs, bottom bracket and headset -- Check of hubs, bottom bracket and headset -- Check of all screws of the bike -- Check of all screws of the bike -- Check of handle bar, stem, saddle rails and seat post -- Check of handle bar, stem, saddle rails and seat post -- Check if brakepads and rims are worn out -- Check if brakepads and rims are worn out -- Check of disc brake according to enclosed service manual -- Check of disc brake according to enclosed service manual -- Check of suspension fork according to enclosed service manual -- Check of suspension fork according to enclosed service manual -- Check of shifters and derailleurs incl. cables. -- Check of shifters and derailleurs incl. cables. Date of Service: 22 Dealer’s Signature: BMX | BIKE OWNER’S MANUAL 2015 Date of Service: ENGLISH ENGLISH SCOTT SERVICE PLAN Dealer’s Signature: BIKE OWNER’S MANUAL 2015 | BMX 23 SCOTT SERVICE PLAN Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date of purchase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date of purchase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Annual service to be done Annual service to be done -- Check of shock mounts incl. lubricating the bushings -- Check of shock mounts incl. lubricating the bushings -- Check of swingarm pivot incl. axle and mounts -- Check of swingarm pivot incl. axle and mounts -- Check of rear shock according to the enclosed shock manual -- Check of rear shock according to the enclosed shock manual -- Check of hubs, bottom bracket and headset -- Check of hubs, bottom bracket and headset -- Check of all screws of the bike -- Check of all screws of the bike -- Check of handle bar, stem, saddle rails and seat post -- Check of handle bar, stem, saddle rails and seat post -- Check if brakepads and rims are worn out -- Check if brakepads and rims are worn out -- Check of disc brake according to enclosed service manual -- Check of disc brake according to enclosed service manual -- Check of suspension fork according to enclosed service manual -- Check of suspension fork according to enclosed service manual -- Check of shifters and derailleurs incl. cables. -- Check of shifters and derailleurs incl. cables. Date of Service: 24 Dealer’s Signature: BMX | BIKE OWNER’S MANUAL 2015 Date of Service: ENGLISH ENGLISH SCOTT SERVICE PLAN Dealer’s Signature: BIKE OWNER’S MANUAL 2015 | BMX 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2014:09:24 10:23:26+02:00 Creator : Adobe InDesign CC 2014 (Macintosh) Modify Date : 2015:01:15 16:39:05+01:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:01:15 16:39:05+01:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:9b735b99-6f54-a04e-bb67-f3ab9bc629f8 Original Document ID : xmp.did:02801174072068119109A3CCBAC12A51 Document ID : xmp.id:759cb445-13be-41aa-a2ba-e78e1f6ec48a Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:26ca3e56-b16f-4a74-ba98-b5f407ba617f Derived From Document ID : xmp.did:84a97797-d6d6-49b5-aed8-4459d8f5713e Derived From Original Document ID: xmp.did:02801174072068119109A3CCBAC12A51 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2014:09:24 10:23:26+02:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 13EXIF Metadata provided by EXIF.tools