Bike Guide 2017 Plasma4 En 151216 User Manual
2017-01-09
User Manual: Bike Guide 2017 Plasma4 En 151216 2017_Plasma4_EN_151216 bikes bike 2017 manuals
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
SCOTT PLASMA 4 USER MANUAL All rights reserved © 2016 SCOTT Sports SA Distribution: SSG (Europe) Distribution Center SA, P.E.D. Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium v6.2/15122016 WWW.SCOTT-SPORTS.COM SCOTT Sports SA Route du Crochet 17, CH–1762 Givisiez Phone: +41 26 460 16 16 | Fax: +41 26 460 16 00 Email: scottsupport@scott-sports.com W W W. S C O T T- S P O R T S . C O M CONTENT Plasma 4 Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 Geometry/Technical Data Plasma 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05 www.scott-sports.com Plasma 4 Frameset Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 The Plasma 4 Carbon bikes should be adjusted exactly to the current rider for reaching maximum safety and performance while riding. Please note that all adjustments should be done at your local SCOTT dealer or following to this manual. Specific Torques Values Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Rear Drop out and Derailleur Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07 BB Standard and FD Mount Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Headset Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08 BB Cable Guide and Cable Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08 Seatpost and Seatube Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09 Storage Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Guarantee on SCOTT Bikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 | 02 ENGLISH PLASMA 4 | BIKE USER MANUAL BIKE USER MANUAL | PLASMA 4 ENGLISH 03 | PLASMA 4 CONCEPT GEOMETRY/TECHNICAL DATA PLASMA 4 Plasma 4 is the result of research and development based on the feedback of the SCOTT-triathlon and time trial athletes searching for one of the most efficient aerodynamics orientated yet affordable frames in the market. Headtube diameter Plasma 4: 1.1/8” SCOTT’s focus was not only on the frame and rider aerodynamics but also on the bike’s ergonomic side and adjustability as well as the frame front end stiffness. BB housing PF BB 86 Rear brake SHIMANO direct mount compatible brake calipers Front brake Compatible with both SHIMANO direct mount and single bolt front brake calipers. Seat post saddle rails clamps Different seatpost saddle rail clamps are available to match with your saddle: 7x7mm, 8x8.5mm or 7x9.6mm Rear hanger Compatible Plasma 4 and Plasma 5 Shifting Mechanical and electrical shifting compatible S/51 A HEAD TUBE ANGLE M/54 72.0 ° L/57 73.0 ° XL/60 73.0 ° 73.5 ° B HEAD TUBE LENGTH 100.0 mm 3.9 in 128.0 mm 5.0 in 159.0 mm 6.3 in 199.0 mm 7.8 in C TOP TUBE HORIZONTAL 526.0 mm 20.7 in 546.0 mm 21.5 in 566.0 mm 22.3 in 583.0 mm 23.0 in D STANDOVER HEIGHT 769.0 mm 30.3 in 799.0 mm 31.5 in 829.0 mm 32.6 in 869.0 mm 34.2 in E BB OFFSET -65.0 mm -2.6 in -65.0 mm -2.6 in -65.0 mm -2.6 in -65.0 mm -2.6 in F BB HEIGHT 269.0 mm 10.6 in 269.0 mm 10.6 in 269.0 mm 10.6 in 269.0 mm 10.6 in G WHEEL BASE 965.0 mm 38.0 in 983.0 mm 38.7 in 1,009.0 mm 39.7 in 1,029.0 mm 40.5 in H BB CENTER TO TOPTUBE CENTER 504.9 mm 19.9 in 534.7 mm 21.0 in 564.4 mm 22.2 in 604.2 mm 23.8 in I BB CENTER TO TOP OF SEATTUBE 519.9 mm 20.5 in 549.7 mm 21.6 in 579.4 mm 22.8 in 619.2 mm 24.4 in J SEATTUBE ANGLE K CHAINSTAY MIN. 403.0 mm 15.9 in 403.0 mm 15.9 in 403.0 mm 15.9 in 403.0 mm 15.9 in L REACH 383.0 mm 15.1 in 400.0 mm 15.7 in 417.0 mm 16.4 in 430.0 mm 16.9 in M STACK 500.0 mm 19.7 in 530.0 mm 20.9 in 560.0 mm 22.0 in 600.0 mm 23.6 in 74.0 ° 75.0 ° 75.0 ° 76.0 ° N STEM LENGTH | 04 ENGLISH PLASMA 4 | BIKE USER MANUAL BIKE USER MANUAL | PLASMA 4 ENGLISH 05 | PLASMA 4 FRAMESET CONTENT REAR DROP OUT AND DERAILLEUR HANGER 1. Frame -- Setup screw: Dropout length can be set to adjust the rear wheel tire clearance with the frame (100) thanks to the rear dropout adjustement screws. The chainstays length can be set from 403mm to 413mm. 2. Fork 3. Headset -- Loosen the screw to set a longer chainstays length, 4. Seatpost -- Tighten the screw to set a shorter chainstays length. 5. Storage box Make sure right and left side are set at the same length by assembling the rear wheel and verifying it is centred with the chainstays. SPECIFIC TORQUES VALUES TABLE -- Rear derailleur hanger: place the rear derailleur hanger in the cavity and tighten the 2x M5 screws to their specified torques. Rear derailleur hanger: SCOTT Part number 239178 Drop out adjustment screws: Standard M5*10mm headless screw available in any hardware shop. | 06 ENGLISH PLASMA 4 | BIKE USER MANUAL BIKE USER MANUAL | PLASMA 4 ENGLISH 07 | BB STANDARD AND FD MOUNT STANDARD The BB standard on Plasma 4 is PF86. FD Mount Standard: Brazed on standard same as other SCOTT road frames: Solace, Addict or Foil. HEADSET OPTIONS Plasma 4 headset Syncros Drop-In 1 1/8” black part number: 238600 Bearings standard: IS41/28.6 | IS41/30 SEATPOST AND SEATUBE CLAMP SADDLE ASSEMBLY: •• IMPORTANT Before assembling the saddle, make sure the seatpost saddle rail clamps (524/525) are compatible with your saddle rails! 1. measure your saddle rails height and width (HxW) 2. Ritchey WCS Carbon One-Bolt Saddle Rail Clamp outer-pieces specifications should be compatible with your saddle rails 3. if the saddle rails dimensions you measured are different from the saddle clamps specifications, purchase the required saddle rail clamps parts at your retailer’s 4. following dimensions are available: 7x7mm, 8x8.5mm or 7x9.6mm 5. set the right saddle tilt and position the saddle rails so that the saddle rail clamps are in the middle of the usable rail clamping area 6. tighten the M6 screw (527) to the specified torque (T13) to assemble the saddle 7. use the seatpost adjustment barrel to adjust your BB-Saddle horizontal offset BB CABLE GUIDE AND CABLE ROUTING 8. once the right offset is set, tighten the two M5 barrel screws (521) to the specified torque (T12) BB cable guide set Plasma 4 Di2 + mechanical part number: 239179 | 08 ENGLISH PLASMA 4 | BIKE USER MANUAL 9. in some cases, you will need to remove the saddle to access the two M5 barrel screws. BIKE USER MANUAL | PLASMA 4 ENGLISH 09 | STORAGE BOX SEATPOST ASSEMBLY: •• IMPORTANT Before assembling the seatpost into the frame, make sure the rear side of the seatpost (side where head is longer) is at the rear end of the frame 1. push gently the seatpost into the frame Plasma 4 framesets and complete bikes are delivered with an additional storage box that can be fitted to the top front end of the Toptube via 2 M5 Allen screws as shown on the sketch below. 2. for electronic shifting: make sure the battery does not get stuck into the frame 3. once the desired seatpost height is achieved pre-assemble the seatpost wedge: position the upper wedge part (505) over the mid wedge part (504) and the low wedge threaded part (503) below the mid wedge part 4. position the M6 wedge screw (506) into the assembly head up and pre-tighten it over 3 turns 5. position the wedge assembly into the seattube insert in front of the seattube, its concave face should correspond to the seatpost front surface 6. tighten the M6 screw to the specified torque (T11) while making sure the upper surface of the wedge coincides with the upper surface of the top tube. Seatpost and seatclamp assembly are fully compatible between Plasma 4 and Plasma 5 frames. -- Seatpost Plasma 4/5 SCOTT part number: 239318 -- Seat Clamp Plasma 4/5 SCOTT part number: 239544 | 10 ENGLISH PLASMA 4 | BIKE USER MANUAL BIKE USER MANUAL | PLASMA 4 ENGLISH 11 | GUARANTEE ON SCOTT BIKES •• WARNING! SCOTT Sports SA is not responsible or liable for any injury caused by any missing compliance with these instructions, particularly but not limited to misuse, incorrect maintenance, incorrect set-up and handling, neglect or abuse. Failure to follow these instructions can result in component failure, serious personal injury. Component failure can lead to loss of control of the bicycle and result in serious personal injury. What is Covered? This warranty covers defects in materials and workmanship at the time of transfer of risks in frames, swingarms and forks (provided it is a fork of SCOTT) on SCOTT branded bikes sold completely assembled by SCOTT or an authorized SCOTT dealer (“Product”). How long does coverage last? This voluntary manufacturer’s warranty is limited to five years for frames and swingarms, respectively two years for forks, from the date of purchase of the Product and is limited to the first purchaser of the Product and subject to the prior registration of your SCOTT bike on www.scott-sports.com within 10 days as of the date of purchase. Transfer of the Product from the first purchaser to another person terminates this limited warranty. The limited warranty of five years for the frames and swingarms shall only be granted in case once a year a maintenance service has been effected according to maintenance requirements as set forth in the manual. The effected annual maintenance service shall be confirmed by stamp and signature. In case such an annual maintenance service has not been effected the warranty of five years for the frame shall be reduced to three years. Costs for maintenance and service have to be borne by the owner of the Product. On Gambler, Voltage FR and Volt-X the warranty period is limited to two years. Repaired or replaced Products are covered for the remainder of the original warranty period and subject to the conditions outlined in the original warranty, to the extent permitted by law. Hereby SCOTT grants a worldwide voluntarily manufacturer’s warranty. To the extent permitted by law and unless a shorter duration is stipulated by law, any warranties implied by law are limited in duration to maximum five, respectively two years, from the date of purchase of the Product and are limited to the first purchaser of the Product. limited warranty does not cover purchases of not completely assembled bikes. This limited warranty does not cover any defect caused by “wear and tear” (a complete list of all parts of “wear and tear” can be found in the general manual that came with your bike), accident, neglect, improper handling, colour fade due to exposure to sunlight, abuse, misuse, an act of God, improper assembly, non-compliance with recommended maintenance and care procedures, improper or incorrectly performed maintenance or repairs performed by someone other than an authorized SCOTT dealer, use of parts or devices not consistent with the Product, and alteration of the Product. All Products come with a manual; please carefully follow the instructions located there or affixed elsewhere to the Product. To the extent permitted by law, consequential and incidental damages are not recoverable under this limited warranty. How do you make a claim under this limited warranty? To make a claim under this limited warranty, you must notify SCOTT of the claimed defect within the warranty period and timely return the Product to SCOTT at your expense for inspection. Please contact your authorized SCOTT dealer, call SCOTT’s customer service or the national SCOTT distributor (dealer locator: www.scott-sports.com). All returned Products must be accompanied by proof of purchase (receipt) from an authorized SCOTT dealer or this limited warranty will not apply. In case of replacement or refund, returned Product becomes the property of SCOTT. A protocol for the handing over of the Product (which you will find at the end of the manual) will remain in copy at the SCOTT dealer after acceptance and signature of the consumer. It is obligatory to show this protocol of handing over together with the defective part in case of a warranty claim given that it provides evidence of purchase or this limited warranty will not apply. How do state laws affect your rights under this limited warranty? This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Recommendation We strongly recommend that you use only authorized SCOTT dealers for yearly maintenance services and for repairs, as improper or incorrectly performed maintenance or repairs voids this limited warranty. Costs for maintenance service have to be borne by the consumer. What will SCOTT do? SCOTT will replace or repair any defective Product, or will refund your purchase price (as evidenced by your tendered receipt of purchase of the Product), at SCOTT’s option. You must pay charges in connection with replacement of any non-defective parts. In such a case, you will be alerted to the advisability of replacing non-defective parts, so you can pre‑authorize the costs. 5 SCOTT Bikes Gambler, Voltage FR, Volt-X What does this limited warranty not cover? This limited warranty does not cover defects which did not exist before the transfer of risks. This limited warranty does not cover Products used in rental operations. This | 12 ENGLISH PLASMA 4 | BIKE USER MANUAL BIKE USER MANUAL | PLASMA 4 ENGLISH 13 |
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Create Date : 2016:12:17 00:46:01+11:00 Metadata Date : 2016:12:17 00:46:04+11:00 Modify Date : 2016:12:17 00:46:04+11:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:ee17ef42-a924-014f-9e46-484dec3b10eb Original Document ID : xmp.did:02801174072068119109A3CCBAC12A51 Document ID : xmp.id:96cefad0-9a88-4933-a673-3f84afab2699 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:64ca6a0e-233b-4da4-b5b7-0397099684c3 Derived From Document ID : xmp.did:1d3d10b6-a73b-42fe-9097-f4fe85371651 Derived From Original Document ID: xmp.did:02801174072068119109A3CCBAC12A51 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2016:12:17 00:46:01+11:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 7 Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools