Billionton Systems GUBT40D USB Bluetooth 4.0 Dongle User Manual Quick Start Guide
Billionton Systems, Inc. USB Bluetooth 4.0 Dongle Quick Start Guide
user manual
Quick Start Guide v.2.1
USB Bluetooth Adapter
Windows Setup:
O/S supported: Win2000 / XP/ Vista.
1. Insert the software CD in the CD-ROM and the installation process will start
automatically
2. Follow the on-screen instruction for software installation
3. Insert the USB dongle into a free USB port of your computer
4. Reboot your computer (if necessary)
5. Start the Bluetooth software
Mac Setup:
1. Make sure your Mac OS is X or above
2. Insert the USB dongle into a free USB port of your Mac
3. Mac OS will install the Bluetooth driver automatically
4. A Bluetooth icon will appear, start the Bluetooth software
5. Please update the Bluetooth software stack from Apple’s Bluetooth support site, if
you have trouble using the USB Bluetooth Adapter
User Guide:
Please refer to the user’s guide in the installation CD.
X:\userguide.pdf
(X stands for the location of the CD-ROM)
You can also read the “Online Help” file by pressing “F1” in the Bluetooth software.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.