Billionton Systems UBTCR3C1 Bluetooth USB Dongle User Manual
Billionton Systems, Inc. Bluetooth USB Dongle
User Manual
1
USB Bluetooth Adapter
User Guide
UBTCR3C1
Billionton Systems Inc.
No. 21, Sui-Lih Rd, Hsin-Chu, 300, Taiwan.
2
Index:
Setup for Windows 98SE/2000/ME/XP
Setup for Mac
Setup for Windows 98SE/2000/ME/XP
Installing Bluetooth software for Windows
IMPORTANT: You must install the software before installing the
Bluetooth device. During the software installation, you will be
prompted to install the device.
Place the installation CD into a CD-ROM drive and setup should launch
automatically. If setup does not launch, use Windows Explorer to
navigate to the appropriate CD-ROM drive and run "Bsetup".
1. Please select your device and O.S.
2. InstallShield Wizard setup dialog box will automatically be
displayed. If the setup program doesn't startup automatically,
manually start the setup program by double clicking Setup.exe
from the Bluetooth software folder.
3
3. Follow the installation wizard and complete the steps to install
Bluetooth software.
4. On the Welcome screen, click the Next button.
5. When the License Agreement screen is displayed, read the License
Agreement, then click the radio button to the left of "I accept the
terms in the license agreement" and click the “Next” button.
6. You can choose the destination folder in your system. If you do not
want to change the destination folder please click “Next”. On the
Destination Folder screen, click the “Change” button to browse to
a new destination folder for the Bluetooth software. Otherwise,
click the “Next” button to accept the default folder.
7. The system is ready to install the Bluetooth software. If you need
to review or change any settings, click the "Back" button. Click
the "Cancel" button to exit the Wizard. Otherwise, click the
"Install" button.
8. For Windows 2000/XP users, system will popup a "Driver
Signature Notice", please click the "OK" button to continue.
9. During installation, system will try to detect your Bluetooth device.
Plug in your Bluetooth device securely when prompted and click
"OK" to continue, or you can click "Cancel" to continue the
installation if you don’t wish to plug in the Bluetooth device.
10. If you click “OK”, the installation program will install the driver
for the Bluetooth device automatically.
4
11. When the installation is completed, click "Finish".
12. Click "Yes" to restart your computer. If you plan to restart later,
click "No".
For more information about the Bluetooth software configuration,
please check the User Guide Readme file or the Application Notes
on the driver and software CD!
Setup for Mac
Mac O.S. X 10.2 or greater
Mac O.S. X 10.2 has built-in Bluetooth software support for USB
Bluetooth. Simply plug in your USB Bluetooth in the USB port. Launch
the Bluetooth software from Control Panel and you can start working in
the realm of Bluetooth. Check the Apple Help menu or the Readme file
on the CD for Bluetooth support.
FCC RF Radiation Exposure Statement:
The equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment."
5
FCC Caution
"This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter."
"Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment."