Billionton Systems USBBT02 Bluetooth USB dongle User Manual

Billionton Systems, Inc. Bluetooth USB dongle Users Manual

UserManual.wiki >

Billionton Systems >

USBBT02 User Manual

Users Manual

CF and USB Bluetooth Adapter ManualIndex:1. Introduction2. Features 3. Specification4. Setup for Windows 98/2000/ME/XP5. Troubleshooting 1.Introduction:Bluetooth is an open specification for a cutting-edge technology that enables short-rangewireless connections between desktop and laptop computers, personal digital assistants,cellular phones, printers, scanners, digital cameras and even home appliances — on aglobally available band (2.4GHz) for worldwide compatibility. In a nutshell, Bluetoothunplugs your digital peripherals and makes cable clutter a thing of the past. Now you canconnect your PDA or PC to bluetooth™ enabled mobile phone with thisBluetooth™adapter. You can access e-mail & Internet no matter where you are with just a little help from yourbluetooth™ mobile phone. Plus, when you are back in the office, you can hook yourself up to your office network aswell as communicate with other Bluetooth™-enabled devices..Package-One USB or CF Bluetooth adapter -One driver and software disk -This user manual2.Features·Bluetooth v1.1 compliance·Full speed USB v1.1 Interface ·Wireless communication within a radius of 32 Feet (10Meters) ·Connect up to 7 different bluetooth enabled devices ·Encryption andauthentication ensure safe, secure communications ·Low power consumption3.Specifications·Main chip : CSR BlueCore 02·Protocol : Bluetooth 2.4 GHz ISM band frequency hopping ·Data Rate : 721 kbps ·Connect up to7 devices in a Piconet ·Antenna: Integrated inside the adapter ·0dBm(Class 2) bluetoothradio ·Connections within ranges up to 32 feet (10 meters) ·Sensitivity : -80dbm at 0.1% Bit

2. Place select your device and O.S..For CF Bluetooth adapter please install the driver before installingBluetooth software, the driver can be located in BTCF of the driverCD.

4.1.1 SYSTEM REQUIREMENTSBluetooth software for Windows runs under Microsoft Windows 98 Second Edition(SE), Windows 2000, Windows Millennium Edition (“Me") and Windows XP.4.1.2 UNINSTALL PREVIOUS VERSION OF Bluetooth softwareAny previous version of the Bluetooth software must be uninstalled before installing anupgraded version.There are two ways to remove Bluetooth software:1. The InstallShield Wizard automatically uninstalls the previous version when anew version is installed.2. Manually uninstall Bluetooth software by completing these steps:a) Close any open applications.b) From the Windows taskbar, click Start followed by Settings followed byControl Panel.c) Double-click Add/Remove Programs.d) On the Add/Remove Programs window, select the BluetoothSoftware entry. Scroll down if necessary.e) Click the Change/Remove button (Windows 2000). The InstallShield Wizard is started.f) Click OK on the Confirm File Deletion window to remove the Bluetooth Software and allof its components.g) When prompted, click Restart and then click the Finish button.4.1.3 INSTALL Bluetooth software4.1.3.1 Windows 98 Second Edition (SE) and Windows Millennium Edition (Me)Bluetooth software requires that a number of Microsoft Windows networking componentsbe installed before Bluetooth software can be successfully configured.If Windows 98SE or Windows Me was installed without the networking components,have the MS Windows CD available during the Bluetooth software installation process.Under normal Windows 2000 installations you should not be prompted for the WindowsCD, however you may want to have it on hand.4.1.3.2 InstallShield WizardInstalling Bluetooth software is an automated process made easy by the use of theInstallShield Wizard. You will need to:

* Read and acknowledge the License Agreement.* Fill in some device information.* Make a few choicesBluetooth software Installation Instructions Section 1—Installing BluetoothsoftwareComplete these steps to install Bluetooth software:1. Exit all applications.2. Insert the Bluetooth software CD. The auto-run option will start and the InstallShieldWizard setup dialog box (Figure 1) is displayed. If auto-run does not occur, manuallystart the setup.(Figure 1)3. Follow the instructions on the screen:a) On the Welcome screen (Figure 2), click the Next button.

(Figure 2)c) When the License Agreement screen is displayed, read the License Agreement, thenclick the radio button (Figure 3) to the left of “I accept the terms in the licenseagreement” and click the Next button.(Figure 3)d) On the Device Information screen (Figure4), enter the required information:

* A Device Name, for example, MT1.* Device Type click the down arrow and choose Desktop or Laptop from the drop-downlist. The device type can be changed after the installation process through the Bluetoothsoftware Configuration Panel.* Click the Next button.(Figure4)f) On the Destination Folder screen (Figure 5), click the Change button to browse to anew destination folder for the Bluetooth software (Figure 5).Otherwise, click the Nextbutton to accept the default folder.

(Figure 5)g) The system is ready to install the Bluetooth software. If you need to review or changeany settings, click the Back button. Click the Cancel button to exit the Wizard. Otherwise,click the Install button (Figure 6).(Figure 6)The Installing Bluetooth Software screen (Figure 7) displays the installation progress. If

prompted to insert the Windows CD, do so and follow the on-screen instructions.(Figure 7)h) When the installation has complete, click the Finish button (Figure 8) on theCompleted screen.(Figure 8) g) And please click Yes to restart your computer, if you plan to restart later please click

No. (Figure 9) (Figure 9) After restart please insert your bluetooth adapter in to your PC orNotebook USB port system will automatically install driver.For more information of Bluetooth software Configuration & User’sGuide, please check the readme file or application note in the driverand software CD! 5. Troubleshooting5.1 CANNOT CONNECT TO A PAIRED DEVICE:Paired devices are always displayed in My Bluetooth Places, even if the remote device isout of range or not powered up.Verify that the remote member of the pair is within radio range and powered up and thenattempt the connection again.5.2 CANNOT DISCOVER SERVICES ON AN UN-PAIRED REMOTE DEVICE:The remote device may not be powered up or may be out of range.* Verify that the remote device is powered up.* Verify that the remote device is in Connectable mode (Bluetooth Configuration Panel >Accessibility tab).* Perform a Search for Devices to verify that the device is within range.5.3 DIAL-UP NETWORKING SERVICE DOES NOT START:The Dial-up Networking service will not start unless a properly configured modem isattached to the server.* Verify that the modem is usable as a local device from the server.* In the Bluetooth Configuration Panel, Local Services tab, double-click the Dialup

Networking service:* Click the down arrow in the Modem field and select the modem that will be used to dialout* Click the OK button* Click the OK button to close the Bluetooth Configuration Panel.5.4 HOW DO I DETERMINE THE BLUETOOTH DEVICE ADDRESS (BDA) OF MYHARDWARE DEVICE?In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices section, selectthe device you want to determine the address of. In the Device Properties section of thedialog box, the fourth entry, Device Address, is the BDA of the selected Bluetoothdevice.5.5 HOW DO I DETERMINE THE VERSION NUMBER OF THE BLUETOOTHSPECIFICATION THAT THE HOST CONTROLLER INTERFACE (HCI) COMPLIES WITH?In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Propertiessection, the fifth entry provides Bluetooth Specification compliance information for theHost Controller Interface.The sixth entry contains the Specification Revision information for the Host ControllerInterface, if appropriate.5.6 HOW DO I DETERMINE THE VERSION NUMBER OF THE LINK MANAGER PROTOCOL(LMP)?In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Propertiessection, the seventh entry provides Link Manager Protocol version number information.The eighth entry contains the Link Manager Protocol sub-version number information, ifappropriate.5.7 HOW dO I FIND INFORMATION ABOUT THE BLUETOOTH HARDWARE ATTACHED TO MYCOMPUTER?In the Bluetooth Configuration Panel, select the Hardware tab.5.8 HOW DO I TEST A NETWORK ACCESS CONNECTION?If the client is hardwired to the LAN, unplug the hardwired connection to ensure that thetest checks the wireless connection rather than the hardwired connection. If the serverhas access to the Internet, open a browser on the client and connect to the World WideWeb. You may also Ping the server from the DOS prompt.5.9 WHY DO I GET AN UNKNOWN PORT MESSAGE WHEN I ATTEMPT TO USE A BLUETOOTHSERIAL PORT?The “Unknown Port” error message usually means an attempt was made to connect aport that was in use.Additional Bluetooth Serial Ports can be added if they are required.

FCC Caution:1. The device complies with Part 15 of the FCC rules. Operation is subject to thefollowing two conditions:1. This device may not cause harmful interference, and (2) this device must acceptany interferencereceived, including interference that may cause undesired operation. 2.FCC RF Radiation Exposure Statement: The equipment complies with FCC RFradiation exposurelimits set forth for an uncontrolled environment. This equipment should be installed andoperated with aminimum distance of 20 centimeters between the radiator and your body. 3. This Transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.4. Changes or modifications to this unit not expressly approved by the party responsiblefor compliancecould void the user authority to operate the equipment.

Navigation menu