Billy Goat F1802V Users Manual 440313 F060811D FORCE PUSH OPER

f902h 59ff690a-159a-4008-85fd-4e87331aaa23 Billy Goat Blower F902H User Guide |

2015-02-02

: Billy-Goat Billy-Goat-F1802V-Users-Manual-481482 billy-goat-f1802v-users-manual-481482 billy-goat pdf

Open the PDF directly: View PDF PDF.
Page Count: 11

DownloadBilly-Goat Billy-Goat-F1802V-Users-Manual 440313 F060811D FORCE PUSH OPER MANUAL
Open PDF In BrowserView PDF
FORCE BLOWER PUSH Owner’s Manual

Patent #6,253,416 and other patents pending
F902S, F902H, F1302H, F1802V

BILLY GOAT FORCE BLOWER
Owner's Manual
Accessories
HOLD DOWN KIT
To secure blower for
transportation on
trailer floors.

P/N 440120
Part No 440313

SOLID FRONT TIRE
Solid flat-free front tire.

PARKING BRAKE
Effective and Easy to
use to prevent blower
from rolling.

CASTER KIT
For greater
maneuverability on
hard surfaces.

P/N 440279

P/N 440140

P/N 440293

1

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

CONTENTS

SPECIFICATIONS

_______________________

3

INSTRUCTION LABELS

4

PACKING CHECKLIST

5

ASSEMBLY

6

OPERATION
MAINTENANCE AND TROUBLESHOOTING

__ 7
____

8

ILLUSTRATED PARTS LIST

9

PARTS LIST

10-11

Go to http://www.billygoat.com for French-Canadian translations of the product manuals.
Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits

Part No 440313

2

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual
Specifications

F902S

Engine: HP

F902H

F1302H

F1802V

9.0 HP (6.6kW)

9.0 HP (6.6kW)

13.0 HP (9.6kW)

Engine: Model

EX270D50021

GX270K1QA2

GX390K1QAA2

3564420224E9

Engine: Type

SUBARU OHC

HONDA OHV

HONDA OHV

B & S VANGUARD

Engine: Fuel Capacity

6.4 qt. (6.1L)

6.3 qt. (6.0L)

6.5 qt. (6.1L)

9 qt. (8.52L)

Engine: Oil Capacity

1.05 qt. (1.0L)

1.16 qt. (1.1L)

1.16 qt. (1.1L)

1.75 qt. (1.66L)

Total Unit Weight:

138 # (62.6Kg)

143 # (64.8Kg)

160 # (72.6Kg)

179 # (81.2Kg)

58"(1.43m)

58"(1.43m)

58"(1.43m)

58"(1.43m)

Overall Width

29.25” (0.74m)

29.25” (0.74m)

29.25” (0.74m)

29.25” (0.74m)

Overall Height

45" (1.14m)

45" (1.14m)

45" (1.14m)

45" (1.14m)

107dB(a) @3340
rpm

109dB(a) @ 3660
rpm

110dB(a) @ 3640 rpm

117dB(a)

87dB(a) @ 3340 rpm

89dB(a) @ 3660 rpm

90dB(a) @ 3640 rpm

97dB(a)

Overall Length:

In compliance with 2000/14/EEC
standards
Sound at Operator’s ears
Vibration at operator position

2

.96 g (9.44 m/s )

2

1.05 g (10.30 m/s )

2

.81 g (7.96 m/s )

18 HP (13.42kW)

2

1.2 g (11.9 m/s )

SOUND

117 dB SOUND LEVEL 97 Db(a) at Operators Position
Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 12-122006 under the conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on
the unit for the sound power level for your model.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure:

Sunny
40.4oF (4.7oC)
6.1 mph (9.9kph)
Southwest
93.6%
30Hg (101.85kpa)

VIBRATION DATA
VIBRATION LEVEL 1.2g (11.9m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 12-13-2006 under the conditions listed below.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure:

Part No 440313

Sunny
57.2oF (14.3oC)
11.8 mph (19.1kph)
South
46.4%
30.1Hg (101.96kpa)

3

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ® FORCE Blower. If any labels are damaged or
missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part
numbers are provided for convenience in ordering replacement labels. The correct position for each label may be
determined by referring to the Figure and Item numbers shown.

LABEL SPARK ARRESTOR
P/N 100252

LABEL READ OWNERS MANUAL
ITEM #44 P/N890301

LABEL EAR EYE BREATHING
ITEM# 45 P/N890254

DANGER FLYING DEBRIS
ITEM # 46 P/N 810736

START

LABEL EXPLOSIVE FUEL
ITEM # 43 P/N 400268

LABEL THROTTLE CONTROL
ITEM # 42 P/N 810656
STOP

ENGINE LABELS

HONDA

SUBARU

READ OWNER’S MANUAL BEFORE OPERATION.
LIRE LE MANUEL D UTILISATEUR AVANT USAGE.
VOR INBETRIEBNAHME UNBEDINGHT BEDIENUNGSANLEITUNG DURCHLESEN.
NO UTILIZAR SINANTES NO HABER LEIDO EL MANUAL

OIL ALERT
WHEN OIL LEVELLOW,
ENGINE STOPS IMMEDIATELY.

HONDA MOTOR CO. , LTD. MADE IN JAPAN

BRIGGS AND STRATTON VANGUARD

Part No 440313

4

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

PACKING CHECKLIST
These items should be included in your carton. If any of these parts are missing, contact your dealer.
Your BILLY GOAT ® FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle
Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag.
READ all safety instructions before assembling unit.
TAKE CAUTION when removing the unit from the box the Handle Assembly is attached to the
unit by cables.

PUT OIL IN ENGINE BEFORE STARTING

PARTS BAG &
LITERATURE ASSY
Warranty card P/N- 400972, Owner’s Manual P/N-440313, General Safety and Warnings Manual P/N100294, Declaration of Conformity P/N-440022, Handle Hardware-Items #10, #11, #74, #71 and #36

Boxing Parts Checklist
Front Air Diverter
(For F902S, F902H, and F1302H
models only)
Item#38
F9 MODEL P/N-440045-4
F13 MODEL P/N-440045-5
Handle Upper Assembly
Item #30 P/N-440035
Parts Bag & Literature Assy
P/N-440266

Honda 9 or 13 hp
Subaru 9 hp
B & S Vanguard 18 hp

Part No 440313

5

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

ASSEMBLY
1.Follow the steps in figures A and B, then securely tighten all hardware shown.
2.Connect spark plug wire.

Figure A

Figure B

The hardware for attaching the upper handle to the lower
is in the parts bag. Install upper handle (item 30), to
preassembled lower handle (item 28) by sliding the upper
over and down the outside of the lower handle. Using bolt
(items #36 and 71), washers (item #10) & lock nut (item
#11) to install upper handle to lower handle. Note: The
Pigtail bolt should go on the side that the pull start is on
and the open end should be facing down. Finish installing
the other side of the upper handle assembly using screw
and lock nut provided.

The throttle control will be attached to the throttle arm on
the engine and wrapped around the engine for shipping.
Unwrap and secure throttle control (item #31) to upper
handle with screws (item #17). Screws will already be
mounted in handle, simply remove and use to mount the
throttle control securing the cable with two Ty-wraps. The
Aim-and-Shoot TM is not attached, you will need to unroll
the cable and attach the ball end to the lever and seat the
cable end into the hole on the saddle clamp, with the
cable running through the slot. To keep the cable from
being damaged use three ty-wraps (item 74) to secure it
to the handle as shown making sure that the cable is not
rubbing against the tire. Note: the cable should be seated
properly in the saddle and should follow the contours of
the handle.

Good routing

Two ½” open ended wrenches

Part No 440313

Bad routing

One 5/16 open ended wrench

6

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

BLOWING OPERATION
Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-Shoot TM control lever to allow
the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful
when debris has piled up to the point that it cannot be blown any farther. The air stream can be directed upward to blow
the top of the debris pile over and allow the operator to continue moving more debris farther.
ADJUSTING AIR DIRECTOR
To adjust air direction, squeeze Aim-N-ShootTM control lever. When you want to blow debris at the same angle for an
extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position.
For operations that do not require the use of the Aim-N-ShootTM feature the manual adjustment knob, pictured below, can
be used to permanently lock the cone into position. NOTE: be sure to release the knob when returning to using the AimN-ShootTM.
DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying
debris may damage, harm, or cause injury to people or objects in air flow range.

Manual Adjustment
knob

FRONT DIVERTER POSITIONING (F9 and F13 models only)
The removable front diverter adapter can be slipped inside the cone to direct the air stream forward. First turn off engine,
and then simply collapse the fold in the larger opening of the diverter and slide inside the cone and allow it to expand.
Then position to the desired angle by rotating the diverter. This option is extremely useful for cleaning out long cracks in
pavement or for cleaning under bushes, building overhangs or along curbs.
WARNING: Unit will be more difficult to control due to the air exiting the unit. Keep hands on the unit at all times when
using the front diverter. Please note that the Aim-N-ShootTM feature will not function when the Front Diverter is installed.

Squeeze and fold
here

Part No 440313

Front diverter

7

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual
MAINTENANCE
PERIODIC MAINTENANCE
Periodic maintenance should be performed at the following intervals:
Maintenance Operation

Every
Use

Daily or Every
5 Hours

Every 25
Hours

Every 50
Hours

Every
100-150
Hours

z

Inspect for worn or damaged parts.

z

Check for excessive vibration

z

Inspect Impeller for cracks or damage
z

Inspect for loose parts.

IMPELLER REMOVAL
1.
2.
3.
4.
5.
6.

Wait for engine to cool and disconnect spark plug.
Remove housing front cover, by removing (11) bolts and nuts, items #13 & #14, around outside of front cover.
Remove impeller bolt (item #35), lock washer (item #86) and washer (item #34).
DO NOT pry on impeller. Pull on center hub area only of impeller. Using a penetrating oil can help loosen a stuck
impeller.
Reinstall new impeller in reverse order of removal.
Tighten impeller bolt. Torque impeller bolt (see parts list on page 15 for proper impeller bolt torque specifications).

TIRE AIR PRESSURE
Check at regular intervals and maintain.
Front Tires - 24 Psi (165 kPa).
Rear Tires - 20 Psi (137 kPa).

TROUBLESHOOTING
Problem
Abnorm al vibration.

Engine will not start.

Engine is locked, will not pull
over.
TM
Aim -N-Shoot
lever sticking

Possible Cause
· Loose or out of balance im peller.
· Debris in im peller.
· Loose engine.

Solution
· Check im peller and replace if required.
· Clear debris with com pressed air or a
backpack blower (see below pictures).*
· Check engine.

· Engine not in full choke position.
· Out of gasoline or bad, old gasoline.

· Check choke position.
· Check gasoline.

· Spark Plug wire disconnected.
· Gas valve off.
· Dirty air cleaner.

· Connect spark plug wire.
· Turn on gas valve.
· Clean or replace air cleaner. Contact a
qualified service person.
· Contact an engine servicing dealer for
engine problem s.
· Clean debis
· Apply silicone based lubricant to
pivot points
· Loosen m anual adjustm ent knob
· Loosen nut

· Engine problem .
· Debris stuck around cone
· Cone adjustm ent knob too tight
· Adaptor m ount nut (item 38) too
tight

*Using compressed air, or a Backpack blower, you can
loosen or free debris easily from the impeller and housing,
which can cause wear and tear on the machine. You can
manually remove debris by taking off the front housing.
Note: Always disconnect the sparkplug when servicing.

Part No 440313

8

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

ILLUSTRATED PARTS LIST

Part No 440313

9

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

PARTS LIST
F1302H
F902H
F902S
F1802V
ITEM NO. DESCRIPTION
PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. PART NUMBER
1
ENGINE 13 HP HONDA GX390
440018
1
ENGINE 9 HP HONDA GX270
430287
1
ENGINE 9 HP HORZ SUBARU OHC
430413
1
ENGINE 18 VANGUARD
812240
2
BASE ENGINE WA FSP
440244-S
1
440244-S
1
440244-S
1
440244-S
3
SPACER RING ENGINE
440009
1
440009
1
440009
1
440174
4
PLATE REINFORCE HOUSING
440010
2
440010
2
440010
2
440010
5
HOUSING FRONT MOLDED
440023
1
440023
1
440023
1
440023
6
HOUSING BACK MOLDED
440024
1
440024
1
440024
1
440024
7
WASHER LOCK
8177012
5
8177013
5
8177013
5
8177013
8
SCREW CAP 3/8-16X1 1/2 ZP
8041052
4
8041052
4
8041052
4
SCREW CAP 3/8-16X 2" ZP
8041054
9
ROD HAND STOP
440057
1
440057
1
440057
1
440057
10
WASHER 5/16 FLATWASHER Z/P
8171003
20
8171003
20
8171003
20
8171003
11
NYLON INSERT LOCKNUT 5/16-18
8160002
10
8160002
10
8160002
10
8160002
12
SCREWCAP 5/16-18 X 1.75 ZP
8041031
4
8041031
4
8041031
4
8041031
13
SCREWCAP 1/4-20 x 1 1/2
8041008
11
8041008
11
8041008
11
8041008
14
NUT FLANGE 1/4-20
900455
11
900455
11
900455
11
900455
15
WHEEL & TIRE 13" X 5" PNEUMATIC
440054
2
440054
2
440054
2
440054
16
RING RETAINING 3/4
850230
2
850230
2
850230
2
850230
17
SCREW SELF-TAP 5/16 NC X 3/4 HEX
8122082
7
8122082
7
8122082
7
18
WHEEL ASSY 10 " PNEUMATIC
400295
1
400295
1
400295
1
400295
19
SPACER FRONT AXLE
440220
1
440220
1
440220
1
440220
20
SPACER LH WHEEL FRONT
440224
1
440224
1
440224
1
440224
21
SPACER RH WHEEL FRONT
440221
1
440221
1
440221
1
440221
22
SCREWCAP 1/2-13 x 9 1/2"
8041240
1
8041240
1
8041240
1
8041240
23
WASHER FLAT 1/2" SAE
8172011
2
8172011
2
8172011
2
8172011
24
WASHER W/BOLT WA
440075
1
440075
1
440075
1
440075
25
KNOB 3/8-16 SOLID HUB
811230
1
811230
1
811230
1
811230
26
WASHER 2.25 OD x .515 ID x .134 ZP
610308-P
1
610308-P
1
610308-P
1
610308-P
27
BRACKET HOLDER WA
440240
1
440240
1
440240
1
28
HANDLE LOWER
440034
1
440034
1
440034
1
440034
29
NYLON INSERT LOCKNUT 1/2-13
8160005
1
8160005
1
8160005
1
8160005
30
HANDLE UPPER
440035
1
440035
1
440035
1
440035
31
CONTROL THROTTLE
440013
1
440013
1
440013
1
440013
32
CABLE THROTTLE CONTROL
440014
1
440014
1
440014
1
440178
33
NUT LOCK 3/8-16 LT WT THIN ZP
8161042
1
8161042
1
8161042
1
8161042
34
WASHER 1.5 O.D.X 0.45 I.D. X 0.5
440176
1
440176
1
440176
1
440176
35
790167
1
SCREWCAP 3/8-24 X 2 3/4" GR. 8 (38 +/-2 ft-lbs.)
SCREWCAP 7/16-20 X 2 3/4" GR.8 (60 +/-2 ft-lbs)
440285
1
440285
1
8042062
SCREWCAP 3/8-24 X 4 GR.8 (38 +/-2 ft-lbs)
36
SCREWCAP 5/16"-18 X 2" ZP
8041032
1
8041032
1
8041032
1
8041032
37
DIRECTOR CONE 5"
440044-S
1
DIRECTOR CONE 4"
440046-S
1
440046-S
1
DIRECTOR CONE 6"
440170-S
38
DIVERTOR FRONT
440045-5
1
440045-4
1
440045-4
1
39
SCREW SM #10-24X1/2" DRILL POINT
8122064
2
8122064
2
8122064
2
8122064
40
IMPELLER ASSEMBLY 17"
440236
1
440236
1
440236
1
IMPELLER SERVICE ASSY FORCE 18HP
440162
41
GRILL FRONT BLOWER
440067-1-S
1
440067-1-S
1
440067-1-S
1
440171-S
42
LABEL THROTTLE CONTROL
810656
1
810656
1
810656
1
810656
43
LABEL FUEL EN/SP
100261
1
100261
44
LABEL READ
890301
1
890301
1
890301
1
890301
45
LABEL EAR EYE BREATHING
890254
1
890254
1
890254
1
890254
46
LABEL DANGER FLYING DEBRIS
810736
1
810736
1
810736
1
810736
47
GRIP 1-1/4" ID x 13"
440012
1
440012
1
440012
1
440012
48
LABEL FORCE
440268
1
440268
1
440268
1
440268
49
HANDLE ASSY UPPER
440104
1
440104
1
440104
1
440104
50
KEY 1/4" SQ x 3.25
9201128
1
9201128
1
9201128
1
KEY 1/4" SQ x 2.75
9201130
51
SCREWCAP 1/4-20 X 1"
8041006
52
WASHER FLAT 1/4
8171002
53
NUT LOCK 1/4"-20 HEX ZP
8160001
1
8160001
1
8160001
1
8160001
54
HANDLE DIVERTER FORCE
440119
1
440119
1
440119
1
440119
55
PIN LATCH DIVERTER
440118
1
440118
1
440118
1
440118
56
SPRING COMPRESSION 0.281 X 0.88
440129
1
440129
1
440129
1
440129
57
RING RETAINING .122 DIA
440125
1
440125
1
440125
1
440125
58
SADDLE UPPER DIVERTER
440115
1
440115
1
440115
1
440115
59
PLATE LOCK DIVERTER
440116
1
440116
1
440116
1
440116
60
SCREW PLASTITE #6-19 X 5/8"
440126
1
440126
1
440126
1
440126

Part No 440313

10

QTY.
1
1
1
2
1
1
5
4
1
20
10
2
11
11
2
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
7
5
1
1
1
1
1
1
1
1

Form No F060811D

FORCE BLOWER PUSH Owner’s Manual

ITEM NO.
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
125

DESCRIPTION
SADDLE LOWER DIVERTER
SCREW PLASTITE #10-14 X 1"
PIN PIVOT DIVERTER CONTROL
RING RETAINING 5/16
CABLE ASSY
DIVERTER PIVOT ADAPTOR
SPRING EXTENSION 0.468 X 5.25
BRACKET DIVERTER FORCE
PIN CLEVIS 1/4 X 3/4
.051 X 3/4" HITCH PIN CLIP
EYEBOLT PIGTAIL 5/16"-18 X 1 1/4"
ADAPTOR MOUNT WA
GRIP 1-1/4" ID x 9.5" LONG
TY-WRAP
WASHER .765 ID X 1.25 OD X 0.6"
FORCE WHEEL BEARING .751 ID
GUARD MANIFOLD
GUARD MUFFLER
SPACER 1" ID X 2" OD X 0.890 TK
SPACER 1" ID X 2" OD X 0.265 TK
SCREW SELF TAP 1/4"-20 X 5/8"
SPACER REAR WHEEL PUSH
PLUG
CARRIAGE BOLT 3/8"-16 X 2" ZP
SPARK ARRESTOR LABEL
WASHER LOCK 3/8 ST MED
WASHER LOCK 7/16 ST MED
SCREW PLASTITE 1/4"-10 X 3/4" HWH ZP
SCREW SM 1/4 X 1" DRILL PT
LABEL MADE IN U.S.A.

Part No 440313

F1301H
F901H
F901S
F1801V
PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. PART NUMBER
440114
1
440114
1
440114
1
440114
440132
2
440132
2
440132
2
440132
440123
1
440123
1
440123
1
440123
430327
1
430327
1
430327
1
430327
440117
1
440117
1
440117
1
440117
440121
1
440121
1
440121
1
440121
440130
1
440130
1
440130
1
440130
440212
1
440212
1
440212
1
440212
440124
1
440124
1
440124
1
440124
440193
1
440193
1
440193
1
440193
440280
1
440280
1
440280
1
440280
440122
1
440122
1
440122
1
440122
440146
1
440146
1
440146
1
440146
900407
5
900407
5
900407
5
900407
850238
2
850238
2
850238
2
850238
440055
2
440055
2
440055
2
440055
812243
812242
830112
830113
890359
440226
2
440226
2
440226
2
440226
791056
2
791056
2
791056
2
791056
8024062
4
8024062
4
8024062
4
8024062
100252
1
100252
1
100252
1
100252
8177012
1
8177012
8177013
8177013
1
840082
2
840082
2
840082
2
840082
430208
520116
1
520116
1
520116
1
520116

11

QTY.
1
2
1
1
1
1
1
1
1
1
1
1
1
5
2
2
1
1
1
2
2
2
2
4
1
1
2
2
1

Form No F060811D



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 11
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:bd9abc87-2997-437b-87dd-33fad991109c
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2011:06:15 13:55:55-05:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:06:15 13:55:55-05:00
Document ID                     : uuid:44e0ac6e-ecac-44b5-a41e-81f9fa38c896
Format                          : application/pdf
Title                           : Microsoft Word - 440313 F060811D FORCE PUSH OPER MANUAL
Creator                         : FlorenceJ
Author                          : FlorenceJ
EXIF Metadata provided by EXIF.tools

Navigation menu