Binatone Electronics IDECTX2I 1.9GHZ CORDLESS PHONE User Manual ht420 d p65

Download:
Mirror Download [FCC.gov]
Document ID	937855
Application ID	EVcK+ynmweCrjbMreeIvtQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	206.48kB (2581017 bits)
Date Submitted	2008-05-07 00:00:00
Date Available	2008-05-08 00:00:00
Creation Date	2006-06-08 03:32:14
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2008-04-11 11:08:11
Document Title	ht420_d.p65
Document Creator	PageMaker 6.5
Document Author:	tj

USER GUIDE
iDECT X2i System
DIGITAL CORDLESS
TELEPHONE
THIS EQUIPMENT IS NOT DESIGNED FOR
MAKING EMERGENCY TELEPHONE CALLS
WHEN THE POWER FAILS. ALTERNATIVE
ARRANGEMENTS SHOULD BE MADE FOR
ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
iDECT X2i
iDECT X2i
a power adapter for the base unit
iDECT X2i
a power adapter for each charger pod
Keep your sales receipt, which is
your proof of purchase.
iDECT X2i
Contents of this User Guide
1.
Where to find it
2.
Installation
3.
Basic Telephone operation
4.
Caller Display operation
5.
Customizing your Phone
6.
Phonebook Function
7.
Handset Registration
8.
Restoring default settings
9.
Intercom, transfer, and conference
10. Operational notes
11. Troubleshooting
12. Guarantee and service
13. Technical details
Pressing buttons on your phone
„ When the instructions in this user guide tell you simply to ‘press’ a
button, this means that you should press the button briefly, then release
it.
„ When the instructions tell you to ‘press and hold’ a button, this means
you should keep the button pressed until the display changes and/or you
hear a tone.
IMPORTANTES MESURES DE SÉCURITÉ
Certaines mesures de sécurité doivent être prises pendant
l’utilisation de matérial téléphonique afin de réduire les risques
d’incendie, de choc électrique et de blessures. En voici
quelquesunes:
1.
Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une
baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à
laver, dans un sous-sol humide ou près d’une piscine.
2.
Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil
sans fil) pendant un orage électrique. Ceci peut présenter
un risque de choc électrique causé par la foudre.
3.
Ne pas utiliser l’appareil téléphonique pour signaler une
fuite de gaz s’il est situé près de la fuite.
4.
Utiliser seulement le cordon d’alimentation et le type de
piles indiqués dans ce manuel. Ne pas jeter les piles
dans le feu: elles peuvent exploser. Se conformer aux
règlements pertinents quant à l’élimination des piles.
5.
la socklet-sortie sera installée près de l'équipement et
serafacilement accessible
6.
ATTENTIONIl y a danger d’explosion s’il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie
du même type ou d’un type équivalent recommandé par le
constructeur. Mettre au rebut les batteries usagées
conformément aux instructions du fabricant. ’’A utiliser
uniquement avec les piles rechargeables SANIK
2SN-3/5F60H-S NiMH 600mAh 2.4V .
CONSERVER CES INSTRUCTIONS
================================================
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
1.
Do not use this product near water, for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2.
Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk of
electric shock from lightning.
3.
Do not use the telephone to report a gas leak in the
vicinity of the leak.
4.
Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special
disposal instructions.
5.
Plug the adaptor to the socket-outlet that near the
equipment and shall be easily accessible.
6.
CAUTION
Risk of explosion if battery is replaced by an Incorrect type.
Dispose of used batteries according to the instructions.
Use only with Sanik 2SN-3/5F60H-S NiMH 600mAh 2.4V
rechargeable battery.
SAVE THESE INSTRUCTIONS
================================================
Equipment Approval Information
This equipment is approved for connection to the Public
Switched Telephone Network and complies with Part 15 and 68
of the FCC rules and the requirements adopted by the ACTA.
Notification to Local Telephone Company
On the bottom of this equipment is a label that contains, among
other information, the US number and Ringer Equivalence
Number (REN) for the equipment. If requested, this number
must be provided to the telephone company.
The REN is used to determine the number of devices that may
be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to a line, as determined by
the total RENs, contact the local telephone company. [For
products approved after July 23, 2001, the REN for this product
is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (e.g., 03 is a REN of 0.3). For
earlier products, the REN is separately shown on the label.]
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions
for details.
NOTICE:
•
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation of
this product does not disable your alarm equipment. If you
have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
•
•
Connection to a party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
AC electrical surges, typically resulting from lightning
strikes, are very destructive to the telephone equipment
connected to AC power sources. To minimize damage
from these types of surges, a surge arrestor is
recommended
Rights of the Telephone Company
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required or may request that
you disconnect the equipment until the problem is resolved. But
if advance notice isn't practical, the telephone company will
notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
FCC Interference Information
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference; and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
Privacy of communications may not be ensured when using
this phone.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit that is
different to the one the receiver is connected.
If these measures do not eliminate the interference, please
consult the dealer or an experienced radio/TV technician for
help.
WARNING:
Changes or modifications to this unit that are not expressly
approved by the party responsible for compliance, could void
the user's authority to operate the equipment.
Hearing Aid Compatibility (HAC)
This equipment is hearing aid compatible.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body. This
transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
NOTE: For body worn operation, this handset has been tested
and meets the FCC RF exposure guidelines when used with an
accessories that contains no metal. Use of other accessories
may not ensure compliance with FCC RF exposure guidelines.
Industry Canada Approval information
This product meets the applicable Industry Canada technical
specifications.
The Ringer Equivalence Number is an indication of the
maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed five.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES003. (Cut appareil numérique de la classe B est conforme à la
noeme NMB-003 du Canada.)
Privacy of communications may not be ensured when using
this telephone.
Caution: To maintain the compliance with the Industry
Canada’s RF exposure guidance, place the base unit at least
20cm from nearby persons.
Left and Right soft buttons
Press to select the functions
shown above, then on the display
(for example, Menu or Name)
FLASH / (ON-OFF)
- Press this button for a Flash signal
Keypad lock key
CID
FORMAT key
- Press to edit caller ID for dialing back
-Press and hold over
2 seconds playback
all recorded messages
(New and Old)
REWIND
This line shows the Handset's name.
This line shows the time and date,
and the duration of a call.
You can press either Left or Right
soft buttons to display menu options
or phonebook names neshectwely
TAD
This line shows icons
HANDSET
01:02A 1/1
Me nu
Name
Displayed when the TAD is switched ON,
it turns off when TAD is off.
2. Installation
1. Choose a suitable site for the base unit.
„ where the power adapter plug can reach an easily accessible 120V power
outlet, never try to stretch the mains supply cable.
„ where the telephone line cable reaches your telephone line socket or
extension socket.
„ where the unit isn’t near a bath tub or shower, or anywhere it could get wet.
„ where the unit isn’t near to another telephone or other
electrical equipment, that may cause interference.
2. Plug the telephone line cord and the mains
power lead into the rear of the Base unit.
Press the cables into the grooves so that
the Base unit stands level.
Always use the telephone line cord
supplied with your iDECT X 2 i . Other
telephone line cords may not work.
3. Plug the mains adapter into a
120 V AC, 60 Hz power outlet.
to modular
wall jack
The iDECT X 2 i Base unit must be used with the
supplied mains adapter. Using any other adapter
will result to noncompliance with UL, and
will invalidate any approval given to this apparatus.
4. If you have an iDECT X2i Twin, Triple or Quad system.
Plug the remaining power adapter into an available 120V
power outlet.
Installation continue...
5. Fitting the rechargeable batteries into the Handset.
The One rechargeable battery pack comes with your phone.
A. Remove the battery compartment,
B. Plug the battery connector into the socket at the top of
The battery compartment.
C. Place the battery in the compartment
D. Fit the battery compartment cover, sliding it into place
and pressing firmly to make sure it is secur.
NOTE: Always use the battery pack supplied - never use
any other kind of batteries in the handset
6. Charge the batteries for 15 hours.
Before you use the Handset for the first time, it’s important
to fully charge the batteries. You hear a ‘beep’ when the
Handset is positioned correctly on
the charging cradle.
Leave the Handset on the Base unit
or charger pod for 15 hours.
To keep the batteries charged,
whenever you don’t need to use
the Handset (such as overnight,
or when you go out), leave it on
the Base unit or charger pod.
7. Connect the base unit to the
telephone line connection jack.
3. Basic Telephone operation
The Speakerphone
Press the SPEAKERPHONE button to listen on
calls without holding the Handset near to your ear.
You can start a call by pressing the
SPEAKERPHONE button, or press it at any time
during a call; but you must always press the
PHONE button to end a call.
Basic Telephone operation continue...
To make a call
Using the
Pre-dial mode
Press PHONE or SPEAKERPHONE button.
Dial the telephone number you wish to call.
Dial the phone number.
Ö Press soft button DELETE to clear a wrong input.
Ö Press and hold soft button DELETE to exist
To answer a call
To reject an
Incoming call
to idle state.
Press PHONE or SPEAKERPHONE button.
When the phone rings for an external call, the
icon will flash and the LCD screen will display
EXT CALL (except for calls with Caller display).
Press PHONE or SPEAKERPHONE button to
answer the call.
Press UP or DOWN button to adjust the receiver
volume (1~5 levels).
Ö The LCD screen will display the volume level for
5 seconds. The iDECT X2i phone uses two
separate volume adjustment for the Handset and
the Speakerphone mode.
When receiving an External or Internal incoming
call, and you do not like to answer;
Press soft button END
Ö The incoming call will be rejected.
To end a call
Press PHONE button.
OR
Place the Handset in the Base unit charge cradle.
Ö The phone will automatically hang up (Auto
standby feature). The LCD screen will display the
talk duration time for 5 seconds.
Basic Telephone operation continue...
Mute function
During a call, press soft button MUTE once.
Ö When the mouthpiece is muted,
the person at the other end of the call
cannot hear you but you can hear his side.
Press soft button UNMUTE again to disable the mute
function.
Last Number
Redial
To make a repeat call to the last number you
dialed:
Press REDIAL/UP button to access redial list
Ö The LCD screen will display the last dialed
number.
Press PHONE or SPEAKERPHONE button.
To make a repeat call to one of the 10 last
numbers you dialed:
To delete a
redial number
To delete
All redial
numbers
Press REDIAL/UP button to access redial list
Press UP or DOWN to find the desired number.
Press PHONE or SPEAKERPHONE button
to make call.
Press REDIAL/UP button to access redial list
Press UP or DOWN button to find the number.
Press soft button Option
Press UP or Down button until DELETE
is highlighted
Press soft button SELECT to confirm the deletion
Ö The LCD screen displays the next redial
number record.
Press REDIAL/UP button to access redial list
Pres soft button Option
Press UP or DOWN button until DEL ALL option
is highlighted
Press soft button SELECT to confirm the deletion
Basic Telephone operation continue...
Handset Power
On/Off
To turn the Handset power to Off:
Press and hold POWER button for 3 seconds.
Ö The LCD screen will turn blank.
Ringer On/Off
shortcut
feature
To turn the Handset power to On:
Press POWER button.
Ö The LCD screen shows, INITIALIZE then
return the standby display.
Place the Handset face up on the Base unit
charge cradle.
In Standby mode, press and hold RINGER ON/OFF
button for 3 seconds.
Ö The LCD screen displays RING OFF and
the
icon turns on. The ring volume will
be set to VOLUME 0.
To restore the ring function, press and hold RINGER
ON/OFF button again for 3 seconds.
Ö The icon turns off.
When the keypad is locked, no numeric button can be
pressed so you can’t make calls by mistake. While keypad
is locked, the iDECT X2i phone is still able to make
an emergency call and answering an incoming call.
Press and hold KEY LOCK button for 3 secs.,
the
icon will turn on.
To unlock
Press any button, soft button shows UNLOCK
Press soft button UNLOCK
Ö The display shows PRESS*
Press
Keypad lock
Ö
button UNLOCK
icon turns off.
This feature is useful if you don’t remember where
you put your Handset(s).
Paging the
Handset(s)
Press PAGE button on the Base unit.
Ö The Handset(s) registered to the Base unit emits
a paging tone for 60 seconds. The LCD screen will
show, PAGING
Press any button on the Handset or press PAGE
button on the Base unit to terminate the paging call.
4. Caller Display Operation
Caller Display (CID) Feature
If you subscribe to this feature from your local telephone company, you can see
the phone number of the person calling you before you answer. The caller
display information includes:
„ The caller’s name (maximum of 8 characters) if the network sends it.
„ The caller’s number (maximum of 22 digits).
„ The date and time of the call.
Notes:
1. The Caller Display information will also include a name from the phonebook
if the incoming number matches an entry in the Phonebook.
2. The Date and time are available only with PSTN lines.
The Caller Display records are stored in the Handset. Deletion of
Caller Display records on one Handset applies only to that Handset and
doest not affect the other Handsets registered to the same Base unit.
The place origin of the Caller Display record will display a special network
message as follows:
Message
Significant
WITHHELD
UNAVAIL
The caller hides his number.
The caller’s number is out of the network area.
Note: Withheld and Unavailable calls are not saved in the calls list and do
not show as missed calls.
Call Waiting
When you subscribe to Call Waiting service from your
local telephone company, this telephone will display
the name and number of the second caller while you
are having a conversation with the first caller. When a
new call comes in while you are talking, you will hear
a call waiting beep notification from the Handset. The
new caller’s name (if available) and phone number,
appears on the LCD screen.
When you receive a ‘Call Waiting’ call and you
want to connect the call, press FLASH button and start
talking with the second caller.
Ö The active call will be placed on hold.
Press FLASH button to Switch between callers.
Caller Display Operation continue...
Caller Display list
This phone automatically stores the last 18 calls received. It records call
information such as caller’s name (max. 8 characters) and telephone number
(max. 22 digits) together with the date and time of the call. When the caller
display list is full, the new caller display entry will replace the oldest record.
The ‘CID’
icon will blink to indicate that you have a new Caller Display call stored in
memory, it will blink continuously until you have viewed the new caller display record.
Viewing the
Caller Display
list
Storing Caller
Display
records into
Phonebook
Press UP or DOWN button to scroll to the next
Caller Display record.
Press soft button Details
Ö The number displays.
Press soft button Details again
Ö The date and time display
Press DOWN/CID button.
Press UP or DOWN button to find the Caller
Display record you want to save.
Press left soft button until its shows Option
Press soft button Option display shows
Deleting
Caller Display
Records
Press DOWN/CID button.
Ö The most recent caller' s name be displays.
SAVE TO PB highlighted.
Press soft button Select to confirm.
Press soft button ok to confirm
caller' s name entry
Ö Display shows caller' s number.
Press soft button ok to confirm number entry.
Ö Then recorded in phonebook
the selected caller ID.
Press DOWN/CID button.
Press UP or DOWN button to find the Caller
Display record.
Press left soft button Option display shows
SAVE TO PB is highlighted
Press DOWN button until Delete is highlighted
Press soft button Select confirmation tone
Ö The LCD screen will return to the Caller Display
review.
Caller Display Operation continue...
Deleting
Caller Display
Records
Ö To delete more records, follow steps 2 to 5.
Deleting All Caller Display records:
Press DOWN/CID button.
Press soft button Details,Option until
SAVE TO PB is highlighted
Press DOWN button until DEL ALL is highlighted
Press soft button OK to confirm the deletion.
Press DOWN/CID button.
Press UP or DOWN button to find the Caller Display
record you wish to call.
Press PHONE or SPEAKERPHONE button.
To call back a
Caller Display
record
NOTE: Depending on (a) how the incoming caller's phone number is
formatted when it is received, and (b) whether or not you previously
pre-programmed your local code into the set up menu, you may
need to adjust the format of the incoming caller's stored phone number
before making the call, press the format button to adjust the
number, and try again.
Available formats include:
Number of digits
Explanation
Example
long distance code "1"
+3-digit area code
+7-digit telephone number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
Eleven digits
Ten digits
Seven digits
1-317-888-8888
317-888-8888
888-8888
5. Customizing your Phone
The iDECT X2i provides a user-friendly menu to let
you perform a customize setting for your telephone.
When programming the menu;
„
Press soft button MENU to access menu options
„
Press UP or DOWN button to scroll through the
program sub-menus.
10
Customizing your Phone continue...
The Menu Structure
Main Menu
HANDSET
EXT RING
INT RING
ALARM
0 ~ 4
KEY TONE
LOW BATT
MELODY
VOLUME
TONE
BASE
HS NAME
LOCAL CODE
DATE & TIME
ALARM
DIAL MODE
MELODY 1- 12
MELODY 1- 12
MELODY 1- 12
TONE
PULSE
100MS
250MS
600MS
FLASH TIME
DE-REG HS
REGISTER
LANGUAGE
ENGLISH
FRANCAIS
ESPANOL
Phonebook/ EMERGENCY
Emergency VIEW
call
ADD ENTRY
EDIT
DELETE
DEL ALL
MEM 1-MEMS
Telephone
ACCESS TAD
Answering
Device Menu
PLAY MSG
PLAY MEMO
REC MEMO
PLAY OGM 1
REC OGM 1
PLAY OGM 2
REC OGM 2
DELETE ALL
SET TAD
TAD ON/OFF
ANS MODE
ANS & REC
ANS ONLY
TOLL SAVE, 0~9 RINGS
ANS DELAY
REMOTE PIN
DEFAULT
11
Customizing your Phone continue...
Melody ring
setting for
EXT, INT
and ALARM
Handset ring
volume
setting
Press UP or DOWN button to select EXT RING (external
ring),INT RING (internal ring) or ALARM (alarm
tone)
Press soft button Select to access the one of the above
ring submenu.
Ö The current melody ring will be shown and played once.
Press UP or DOWN button to select one of the 12 melodies.
Ö A sample melody will be played when toggling
from one melody to another.
Press soft button Select to confirm setting.
Ö Display return to ring selection menu
You have a choice of four volume levels, or turn the ringer off.
Key tone
setting
This phone enables you to select one of the 12
ringer melodies for each of the external, internal
call, and alarm.
Press soft button MENU to access menu
Ö display shows HANDSET
Press soft button Select to access handset menu
Ö display shows MELODY highlighted
Press soft button Select to access handset menu
Ö display shows EXT RING highlighted
Press soft button MENU ,the display shows HANDSET
highlighted
Press soft button Select to access handset submenu.
Ö The display shows MELODY highlighted
Press DOWN button once,until VOLUME is highlighted
Press soft button Select to confirm.
Ö The current volume level will be shown and played once.
Press UP or DOWN button to select Volume 0, 1,
2, 3, or 4.
Ö Each selection will be played with emphasis on
the volume intensity.
Press soft button Select to confirm.
Note: If the ring volume is set to VOLUME 0, you
will not be alerted by a ring signal when receiving
an external/internal call but it will not affect your
page and alarm functions.
Each time you press a button, you will hear a tone.
You can turn this off if you prefer.
Press soft button Menu display shows Handset is highlighted.
12
Customizing your Phone continue...
Low battery
warning tone
setting
Press UP or DOWN button to toggle between On or Off.
Press soft button Select to confirm setting.
Handset name
setting
Press soft button Select , display shows Melody
highlighted.
Press DOWN button twice until Tone is highlighted
Press soft button Select to confirm,
Ö display shows Key Tone
Press soft button Select to confirm
Ö display shows ON highlighted
When the battery charge level is low, you will hear a
tone and the ‘battery’ symbol flashes on the LCD
screen. You can turn the tone off if you prefer.
Press soft button Menu to access handset menu
Press soft button Select
Ö display shows Melody highlighted
Press DOWN button until Tone is highlighted
Press soft button Select
Ö display shows Key Tone highlighted
Press DOWN button until LOW BATT option
is highlighted.
Press soft button Select
Ö display shows ON option highlighted
Press UP or DOWN button to toggle between On or Off.
Press soft button Select to confirm.
This feature allows you to change the Handset
name shown on the LCD screen in standby display
Press soft button Menu to access handset menu
Press soft button Select
Ö display shows MELODY highlighted
Press DOWN button until HS NAME is highlighted
Press soft button Select
Ö display shows HANDSET _ by default
Press soft button DELETE once to delete characters one by
one or press and hold soft button DELETE for 5s to delete
whole current name.
Key in upto 8 characters
Press soft button OK to confirm.
Note: The default Handset name is BINATONE
13
Customizing your Phone continue...
Local Code
setting
Date & Time
setting
This feature can hide the local code from
telephone number when receiving a local call or
Press soft button Menu
Ö display shows HANDSET highlighted
Press soft button Select to access handset submenu.
Ö display shows MELODY highlighted
Press DOWN button until LOCAL CODE is highlighted
Press soft button Select
Ö display shows _
Key in your local area code (max 8 digits).
Press soft button OK to confirm.
Note: If this feature is not applicable to your area,
please do not input any digit(s) and confirm as it may
affect the CID/CW (Caller Display/Call Waiting)
information display. Whereas applicable, the user should
input the LOCAL CODE in order to match the number of the
Caller Display records stored on the Phonebook memory.
The default setting is 00:00 1/1. However, you can
set the date and time manually;
Press soft button Menu to access handset menu.
Press soft button Select
Ö display shows Melody highlighted
Press DOWN button until Day&Time is highlighted.
Press soft button Select
Ö display shows Month 1 by default.
Key in digits from 1 to 12.
Press soft button OK to confirm
Ö display shows DATE 01 by default.
Key in digits from 01 to 31.
Press soft button OK to confirm
Ö display shows HOUR 01AM by default.
Key in digits from 01 to 12
10
Toggle UP/DOWN key to select AM or P M
11
Press soft button OK to confirm
Ö display shows MINUTE 30 by default.
12
Key in digits from 00 to 59
13
Press soft button OK to confirm the setting.
14
Customizing your Phone continue...
Alarm setting
This feature allows you to set an alarm time for your Handset.
Press soft button Menu to access handset menu
Press soft button Select
Ö display shows MELODY highlighted.
Press DOWN button until ALARM is highlighted
Press soft button Select
Ö display shows ON by default, or toggle to show OFF
Press soft button ON to confirm
Ö display shows HOUR 12AM by default.
Key in digits from 01 to 12
Toggle UP/DOWN key to select AM or PM
Press soft button OK to confirm
Ö display shows MINUTE 00 by default.
Key in digits from 0 0 to 59
10
Press soft button OK to confirm the setting.
You can set the alarm melody ringer under MELODY
sub-menu. When activated, the Handset will ring
for 30 seconds.
To stop the alarm, press any button on the Handset.
Dial mode
setting
Flash time
setting
Note: Once activated, the alarm will only ring
once. You must repeat setting the alarm if you
want to be alerted on the following day.
Press soft button Menu
Ö display shows HANDSET highlighted
Press Down button until BASE option is highlighted
Press soft button Select
Ö display shows DIAL MODE highlighted
Press soft button Select to confirm
Ö display shows TONE highlighted
Press soft button Select to confirm the setting.
Repeat the steps above for Pulse mode setting.
Note: When dialing in Pulse mode, press */RING
button once to temporarily switch to the tone mode
dialing. It will return to the pulse mode once the
Handset goes on hook (Temporary tone dialing feature).
Press soft button Menu
Ö display shows HANDSET highlighted
Press Down button until BASE option is highlighted
15
Customizing your Phone continue...
To unsubscribe 1
all registered
Handsets
Language
display
setting
Emergency
Call setting
Press soft button Select
Ö display shows DIAL MODE highlighted
Press Down button until FLASH TIME option is highlighted
Press soft button Select to confirm
Ö display shows 600ms highlighted by default
Press DOWN button to highlight options of 100ms,
250ms and 600ms setting.
Press soft button Select to confirm highlighted .
In standby mode, press and hold PAGE button on
the Base unit until the ‘In use’ LED turns ON.
Release the PAGE button.
Press and hold PAGE button again until the ‘In
use’ LED turns OFF.
Ö All of the Handsets registered to the Base unit
are removed.
You can change the language that appears on the
LCD Screen.
Press soft button Menu
Ö display shows HANDSET highlighted
Press Down button until BASE option is highlighted
Press soft button Select
Ö display shows ENGLISH highlighted by default.
Press DOWN button to highlight options of
ENGLISH,FRANCAIS and ESPANOL setting.
Press soft button Select to confirm highlighted .
Your Handset can pre-program 5 different numbers
for an emergency call.
Press soft button Name
Ö display shows EMERGENCY highlighted
Press soft button Select
Ö display shows MEM 1(menory location 1).
Press UP or DOWN button
Ö display shows memory location (MEM1~MEM5)
Press soft button Select highlighted memory location
Ö display shows -
Key in digits (upto 18 max.)
Press soft button OK to confirm
16
Customizing your Phone continue...
Making an
Emergency
Call
Press and hold soft button Name
Ö display shows MEM CALL
Tap the numeric button(1 to 5 JKL) of the
emergency call number location.
The handset will dial out the number automatically.
To end the call, press PHONE button.
6. Phonebook function
Phonebook
To add a new
record into the
Phonebook.
The Phonebook can store up to 50 names (8 char.max)
and telephone numbers (18 digits max).
Press soft button Name
Ö display shows EMERGENCY highlighted
Press DOWN button VIEW until option is highlighted.
Press soft button Select
Ö The phonebook entry will be displayed in alphanumeric
order (or the display will show EMPTY if there is no record
stored).
Tap the button (2 ABC .... 9 WXYZ)
that corresponds to the first letter of a Caller’s
name and the search will jump to the entry
beginning with that letter.
Or press UP or DOWN button to scroll through the
next records.
Press soft button Details to review number
record of current name entry.
Press soft button Name
Ö display shows EMERGENCY highlighted
Press DOWN button until ADD ENTRY
option is highlighted.
Press soft button Name
Ö display shows NAME?
Key in characters (upto 8 characters max)
Press soft button OK to confirm
Ö display shows NUMBER?
Key in digits (upto 18 digits max)
Press soft button OK to confirm the entry.
17
Phonebook function continue...
Notes:
Ö If there are no memory locations left in the
Phonebook, the LCD screen will display MEM FULL
To continue with memory programming, you must
delete or edit existing Phonebook records.
Ö If you mis-type entering the name or phone
number, press soft button DELETE to delete the
last character or digit entry. Press and hold soft
button DELETE to delete all the name or number
entry.
Some internal switchboards may require you to dial
a number to get an outside line. It may take a few
seconds to connect, requiring a pause in the
dialing sequence.
In the number entry mode, press and hold PAUSE
button for 3 seconds to make a pause.
Ö It will be displayed as P on the LCD screen.
Note: The default pause time is 3 seconds.
Storing a pause
in a number
To edit a
Phonebook
record
Press soft button Name
Ö display shows EMERGENCY highlighted
Press DOWN button until EDIT option is highlighted.
Press soft button Select
Ö The phonebook entry will be displayed in
alphanumeric order(or the display will show EMPTY
if there is no record stored).
Press UP or DOWN button to search for the entry
which you wish to edit.
Press soft button OK
Ö display shows name entry.
Press soft button DELETE to delete unwanted
characters then key in desired characters via keyboard.
Press soft button OK
Ö display shows number entry.
Repeat step 6 to edit the number.
Press soft button OK to confirm.
18
Phonebook function continue...
The alphanumeric
keypad buttons
Keypad buttons
Deleting a
single
Phonebook
record
Deleting all
Phonebook
records
The telephone alphanumeric buttons are used to enter
characters when entering names and numbers. Press the
appropriate keypad button to get the following characters.
You can store a maximum of 8 characters on the letter icon
and a maximum of 18 digits on the number icon.
1st press 2nd press 3rd press 4th press 5th press
Space
Press soft button Name
Ö display shows EMERGENCY highlighted
Press DOWN button until DELETE option is highlighted.
Press soft button Select
Ö The phonebook entries will be displayed in
alphanumeric order(or the display will show EMPTY
if there is no record stored).
Press UP or DOWN button to search the entry
which you wish to delete.
Press soft button OK
Ö display shows CONFIRM?
Press soft button OK to confirm the deletion of
current entry.
Press soft button Name
Ö display shows EMERGENCY highlighted
Press DOWN button until DEL ALL option is highlighted.
Press soft button Select
Ö display shows CONFIRM?
Press soft button OK to confirm the deletion of
all entry.
19
7. Handset registration
The Handset supplied with your iDECT X2i Base
is pre-registered at the factory so that your phone
will be ready for use out-of-box.
Ö To check whether a Handset is registered, make
sure mains power to the Base unit is switched on and
the Handset is within transmitting range. The
Handset LCD screen should show its number and the
‘antenna’ icon.
However, in case the Handset accidentally lost link to
the Base unit, you need to re-register the Handset.
WARNING:
You should not register the Handset/s unless the
Handset has lost registration.
To register a
new handset
or to
re-register a
handset
Press soft button Menu
Ö display shows HANDSET highlighted
Press DOWN button until REGISTER
option is highlighted.
Press soft button Select
Ö display shows PIN CODE
Key in 4 digit PIN code (default = 0000).
Press soft button ok to confirm
Ö display shows SEARCHING
Simultaneously, press and hold PAGE button on the
Base unit until the ‘In Use’ LED indicator lights up.
If the registration is successful, the LCD screen will
display:
SUCCESS and then shows the standby display .
If the registration has failed, the LCD screen will
display:
FAILED and then shows BS SEARCH
and the
icon will be flashing. Repeat the
registration process again.
Note: You can register up to four Handsets on the Base unit.
20
8. Intercom, transfer & conference
„
To make an
intercom call
With more than one Handset registered to your
Base unit, you can
make intercom calls from one handset to another,
„
make a new intercom call while you are on an
outside call,
„
transfer an outside call from one handset to another,
„
set up a three-way conference call between
yourself, an outside call and an intercom call.
Each handset has its own number - 1, 2, 3, or 4
which is shown behind the Handset name.
To make a call to another Handset:
Press Handset INTERCOM button.
Enter the Handset number you wish to call.
Ö The called Handset number will ring.
Ö To answer the Intercom call, the called party
Handset user must press PHONE or
SPEAKERPHONE button.
To end an intercom call:
Press PHONE button or put the Handset to the
Base unit cradle.
Ö The other Handset will automatically hang up.
Note: After an intercom call is established between
two Handsets, the third Handset can still make or
answer an external call.
21
Intercom, transfer & conference continue...
To transfer
a call
When you’ve made or answered an outside call and
want to transfer it to another Handset:
Press INTERCOM button.
Ö The outside call will be put on hold.
Key in the number of the other Handset.
Ö If the other handset does not answer, you can get
back to the outside call by pressing INTERCOM
button again.
When the other Handset answers, press PHONE
button to hang up and the outside call is transferred.
Ring back
call feature
When the transferred call is not answered within a
time-out period of 30 seconds, a Ring back call will
be generated on the internal caller handset. If there
is no CID information available, RING BACK will
be displayed; otherwise the normal CID information
will display again.
Press PHONE button if you wish to answer back
the outside call.
Ö When the transferred call is not yet answered
within 30 seconds, your phone will automatically
hang up.
Conference
calls
To set up a three-way conference between yourself, an
outside call and an intercom call with another handset:
Either make or answer an outside call.
Press INTERCOM button then Key in the number
of the other Handset.
Ö The outside call will be put on hold.
Ö The internal Handset user (Intercom call) answers
by pressing PHONE or SPEAKERPHONE button on
their Handset.
When the internal Handset answers, press and
hold #/ button to establish the
three-way conference call.
Ö During the conference call, either Handset can
hang up, and will not affect the conversation
between the external caller and the other Handset.
22
9 . Answering Machine system
„ The X2i (Telephone Answering Machine) system has a memory to record the
TAD, and Memo messages .
„ When the TAD has recorded new ICM message(s), the IN USE light on the Base
unit will flash and the the Handset LCD screen displays ‘NEW MSGX’.
„ For multi-Handset operation, only one Handset can access the TAD system at a
time . If other registered Handset/s tries to access, the LCD screen will display ‘BUSY’.
The TAD is accessed through the Handset. The message/s will be played
in speakerphone mode (default setting).
Listening to
your incoming
message
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press soft button Select
Ö display shows PLAY MSG highlighted
Press soft button Select
Ö display shows PLAYING 1(message 1playback)
and voice playback at handset loudspearker then
next until finish all.
Ö display shows NO MSG if there is no voice message
Note: during the time, you can use handset numeric
keyboard to perform STOP,SKIP, GO BACK and
DELETE operations
23
Answering Machine system continue...
Playing a
memo
Press soft button Menu
Ö display shows TAD highlighted.
Press soft button Select
Ö display shows ACCESS TAD highlighted.
Press soft button Select.
Ö display shows PLAY MSG highlighted.
Press DOWN button until
PLAY MEMO option is highlighted.
Recording a
memo
Press soft button Select
Ö display shows PLAYING 01:02AM 08/24
(time and date when record made) and voice playback
at handset loudspeaker then next until all finish.
Ö display shows NO MSG if there is no voice message
Note:During the time,you can use handset numeric
keyborad to perform STOP ,SKIP,GO BACK and DELETE
operations.
The X2i provides only one recording space
with a maximum length of 1 minute Memo
message.
You have to erase the old memo first before
recording a new memo.
Press soft button Menu
Ö display shows TAD highlighted.
Press soft button Select
Ö display shows ACCESS TAD highlighted.
Press soft button Select
Ö display shows PLAY MSG highlighted.
Press DOWN button until
REC MEMO option is highlighted.
Press soft button Select
Ö display shows RECORDING 00:00
Speak into the handset microphone for
max one minute.
Press
to stop recording
Ö the Memo message play back for
review immediately.
24
Answering Machine system continue...
Playing an
outgoing message
(OGM 1)
OGM 1 is denoted the ANS & REC mode outgoing
greeting asking caller to leave voice message and
to be recorded in X2i systiem.
Press soft button Menu
Ö display shows TAD highlighted.
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press soft button Select
Ö display shows PLAY MSG highlighted.
Press DOWN button until PLAY
Ö OGM 1 option is highlighted.
Press soft button Select
Ö display shows PLAYING and OGM 1
playbacks at handset loudspeaker.
25
Answering Machine system continue...
Recording an
outgoing message
(OGM 1)
Playing an
outgoing
announcement
(OGM 2)
X 2i sytem comes with the pre-recorded OGM,
“Hello,we are not available, please leave a message
after the tone” (default OGM 1) however, you can also
record your own OGM 1.
Press soft button Menu
Ö display shows TAD hightlighted.
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press soft button Select
Ö display shows PLAY MSG highlighted
Press DOWN button until REC OGM 1
option is highlighted
Press soft button Select
Ö display shows RECORDING 00:00 (counter)
Speak to the handset microphone to record the
memo for 30 sec max.
Press
button to stop recording.
Ö The OGM 1 playbacks immediately for you review.
OGM 2 is denoted the ANS ONLY mode outgoing
greeting asking caller to call back later.
Press soft button Menu
Ö display show TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press soft button Select
Ö display shows PLAY MSG highlighted
Press DOWN button until PLAY OGM 2
option is highlighted
Press soft button Select
Ö display shows PLAYING and OGM 2 playbacks
at handset loudspeaker.
26
Answering Machine system continue...
Recording an
outgoing
announcement
(OGM 2)
Deleting All of
ICM and Memo
messages
X 2i comes with the recorded OGM 2, "
not available, please call back ” however, you can
also record your own OGM 2.
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press soft button Select
Ö display shows PLAY MSG highlighted
Press DOWN button until REC OGM 2
option is highlighted.
Press soft button Select
Ö display shows RECORDING 00:00 (counter)
Speak to the handset microphone to record the
memo for 30 sec max.
Press
button to stop recording.
Ö The OGM 2 playbacks immediately for you review.
This operation allows you to delete all of the
recorded ICM and Memo messages in an instant.
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press DOWN button until DELETE
Ö ALL option is highlighted
Press soft button Select
Ö display shows CONFIRM?
Press soft button Select to confirm.
Notes:
1. The DELETE ALL function will not be carried out
if a new ICM message is still present. The LCD
screen displays ‘ NEW MSG X ’ when confirming the
DELETE ALL operation.
2. The DELETE ALL operation will not affect the
recorded OGM 1 and OGM 2 message.
27
Answering Machine system continue...
Switching the
TAM ON
or OFF
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press DOWN button until SET TAD
option is highlighted
Press soft button Select
Ö display shows TAD ON/OFF
Press soft button Select
Ö display shows ON highlighted (default)
Press UP or DOWN button to select ‘ON ’ (default)
or ‘ OFF.’
Ö The
icon appears on the LCD screen if the
TAD ON/OFF is set to ON. If the TAD ON/OFF is
set to OFF, the
icon disappears on the LCD screen.
Press soft button Select to confirm your selection.
Note: If the TAD ON/OFF is set to OFF, the TAD
system will activate calls after 12 rings, allow you
to remotely switch on the answering machine
Changing the
Answering
mode
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press DOWN button until SET TAD option
is highlighted
Press soft button Select
Ö display shows TAD ON/OFF
Press DOWN button until ANS MODE is highlighted.
Press soft button Select
Ö display shows ANS & REC highlighted.
Press UP or DOWN button to select
ANS & REC (default) or ANS ONLY
Ö With ANS & REC , the TAD system will answer
the incoming call after the selected number of rings. It
will announce the OGM 1 and allows the recording of
ICM message.
Ö With ANS ONLY, the TAD system will answer the
incoming call after the selected number of rings. It will
announce the OGM 2 and does not allow the recording
of ICM message.
Press soft button Select to confirm your selection.
28
Answering Machine system continue...
Note: If the memory is full, the answer mode will
automatically change from ANS & REC to ANS ONLY
It will resume to ANS & REC mode after deleting
some recorded message(s).
Selecting the
number of
rings
You can select the number of rings before the X2i
system answers a call.
Changing the
Remote PIN
code
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press DOWN button until SET TAD option
is highlighted.
Press soft button Select
Ö display shows TAD ON/OFF
Press DOWN button until ANS DELAY
is highlighted.
Press soft button Select to confirm
Press UP or DOWN button to select TOLL SAVE,
2, 3, 4, 5, 6, 7, 8 or 9 rings.
Ö Use ‘ TOLL SAVE , the answering machine
responds after the 2nd ring only if you have a new
message. If there is no new message.
The phone will answer after the 4th ring.
Press soft button Select to confirm your selection.
The REMOTE PIN is a three-digit code you need if
you call away from home to check your messages.
The default is 123, you can change it to any three
digits you want.
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press DOWN button until SET TAD
option is highlighted.
Press soft button Select
Ö display shows TAD ON/OFF
29
Answering Machine system continue...
Press DOWN button until REMOTE PIN is highlighted.
Press soft button Select to confirm
Ö display shows OLD PIN for inputting current PIN.
Key in current PIN upto 3 digits
Press soft button OK to confirm .
Ö display shows NEW PIN for inputting new PIN.
Key in new PIN upto 3 digits
10
Press soft button OK to confirm new setting.
Note: The changing of the REMOTE PIN will not be
carried out if you have entered an incorrect OLD PIN
code. However, it will return to the default REMOTE
PIN code after resetting the TAD system.
Resetting the
TAD system
Press soft button Menu
Ö display shows TAD highlighted
Press soft button Select
Ö display shows ACCESS TAD highlighted
Press DOWN button until SET TAD
option is highlighted.
Press soft button Select
Ö display shows TAD ON/OFF
Press DOWN button until DEFAULT is highlighted
Press soft button Select to confirm
Ö display shows CONFIRM?
Press soft button OK to reset X2i to ex-factory setting.
Warning:
To ensure the proper operation of your
phone, please DO NOT reset X2i
system unless it is necessary.
30
Answering Machine system continue...
You can use the Answering System features of your
telephone when you are away from home. To protect
your privacy, most of the features can be used only
after you enter the three-digit REMOTE PIN Code.
Remote
operation
To check your
messages
from a remote
location
Using a tone dialing phone, dial your home phone
number.
Listen to or bypass the OGM.
To bypass the Outgoing Message, press “*” button
Enter your REMOTE PIN Code.
Ö Once you have successfully accessed the VMAIL
sytem of your phone, any new ICM message(s) will
be automatically played back.
Ö Otherwise, press keypad “5” to playback old ICM
message(s). When playing, press keypad “5” again
to play the current message from the beginning.
For other instructions, see the Remote Intruction
code menu.
Note:
„ If the memory is FULL, the X 2i system will
answer your call after the selected time of rings and
plays the OGM 2 message, and then hangs up after 10
seconds. (To free some memory, the caller should
enter the security code and then erase some
unwanted message/s before hang up).
The following is the Remote Instruction Code Help
Menu:
To play previous message, press “4”
To skip message, press “6”
To stop function, press “2”
To delete message currently playing, press “8”
To play MEMO message, press “0”
To switch TAD to ON, press “#” (a single beep tone
will be heard). Press “#” again to TAD ON/OFF to
OFF (a double beep tone will be heard).
31
10. Operational notes
Electrical safety
DON’T let the Base unit get wet. Electrical equipment can cause serious
injury if used while you are wet or standing in water.
If the Base unit ever falls into water, DON’T retrieve it until you have
unplugged the power lead from the mains and the telephone line plug
from the telephone socket; then pull it out by the unplugged cables.
NEVER use your iDECT X2i outdoors during a thunderstorm - unplug
the Base unit from the telephone line and the mains socket when there are
storms in your area. Damage caused by lightning is not covered by the
guarantee.
Locating the Base unit and charger pod
The Base unit and charger pod should be placed on a level surface, in a position
where:
the mains adapter plug will reach an easily accessible AC power outlet
-never try to lengthen the mains power cable.
the telephone line cable will reach your telephone line socket or extension
socket (Base unit only; charger pods have no connection to the telephone
line.)
it is not close to another telephone - this can cause radio interference
during calls
it is not close to a sink, bath or shower, or anywhere else where it might get
wet.
it is not close to other electrical equipment - fridges, washing machines,
microwave ovens, TVs, fluorescent lights, etc.
Radio signals between the Handset and the Base unit
To use your Handset and Base unit together, you must be able to establish a
radio link between them. Be aware that:
Siting the Base unit as high as possible will give better results - for example,
in a two-story house, the best position may be on the first-floor landing.
Any large metal object - like a refrigerator, a mirror or a filing cabinet between the Handset and Base unit may block the radio signal.
Other solid structures, like walls, may reduce the signal strength.
32
Operational notes continue...
Interference
If the sound quality gets worse as you move around while on a call, this is probably
due to interference between the Handset and the Base unit, perhaps because you
are too near to another phone or other electrical equipment. Move to a different
position to clear the interference. If you do not move, your call may be cut off.
Radio interference in the environment may occasionally cause a short break in the
link between the Handset and the Base unit while you are on a call. The Handset’s
display will flash briefly, while the unit automatically changes to a different channel
to restore the link.
Keeping the batteries charged
When you don’t need to carry your Handsets around (for example, at night), leave
them on the Base unit or charger pod, to keep the batteries charged.
Whenever the battery charge level symbol on the display shows ‘nearly empty’,
replace the Handset on the Base unit or charger pod.
Cleaning and care
„ Don’t clean any part of your iDECT X2i with benzene, thinner or other solvent
chemicals - this may cause permanent damage which is not covered by the
Guarantee. When necessary, clean it with a damp cloth.
„ Keep your iDECT X2i away fromhot, humid conditions or strong sunlight,
and don’t let it get wet.
„ Every effort has been made to ensure high standards of reliability for your
iDECT X2i. However, if something does go wrong, pleasedo not try to
repair it yourself - consult your supplier or the Binatone Help Line.
33
11. Troubleshooting
The iDECT X2i must be serviced by trained engineers. NEVER
attempt any repairs or adjustments yourself - you could make the problem
worse and invalidate the Guarantee.
ALWAYS check
first that:
„
„
„
„
you have followed the steps listed in Section 2 to
install and set up your iDECT X2i.
all connectors are firmly inserted in their sockets.
mains power is switched on at the socket.
the batteries are correctly and securely installed, and
are not run down
Everyday use
“I cannot make or
answer calls.”
Check that the Base unit’s mains power adapter is
plugged in and power is switched on. The Base unit
needs mains power for normal operation of the phone
- not just for charging the batteries.
Make sure you’re using the telephone line cable that
was supplied with your iDECT X2i. Other telephone line
cables might not work.
Move the Handset closer to the Base unit.
Check the Battery Level symbol on the display. If it is
low, replace the handset on the base unit or charger pod
to recharge the batteries.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
If you still can’t make calls, try re-registering the
Handset.
“When I press keys
on the Handset,
nothing happens.”
Make sure the batteries are fitted in your handset. If the
Battery Level symbol on the display shows ‘low’,
recharge the batteries.
Press and hold the OK button until the handset comes
to life. The OK button switches the handset on and off.
Check whether there’s a ‘Lock’ symbol on the display. If
so, the keypad is locked. Turn to Section 3 to find out
how to unlock it.
34
Troubleshooting continue...
“When I press keys on
Handset, digits appear
on the LCD screen, but
I can’t make an outside
call.”
Try moving the Handset closer to the Base unit.
“The phone does not
ring.”
Check that the Base unit’s mains power adapter is
plugged in and power is switched on. The Base unit
needs mains power for normal operation of the phone not just for charging the batteries.
Try a different position for the base unit - perhaps
higher, or further from other electrical equipment.
Make sure you’re using the telephone line cable that
was supplied with your iDECT X2i. Other telephone
line cables might not work.
Check that you have not set the ringer volume to Off.
See Section 4 for more information.
Check that the total REN value of all equipment
connected to your telephone line is no more than 4.
Disconnect one or more telephones and see whether
that helps.
“My call was cut off
when I went out of
range. Now I can’t
use my handset.”
Move the Handset closer to the Base unit before you try
again to make a call.
“There is interference,
noise or echoing on
the line.”
Move the Handset closer to the Base unit, or to a
different position.
Try moving the Base unit so that it’s not near other
electrical equipment, such as a TV or a computer.
If you are using a routing box (smart socket), try
disconnecting it then making a call. If the sound is OK
without the routing box, that’s the cause of the problem.
You’ll get the best results if you site the Base unit as
high as possible. For example, in a two-story house,
the first-floor landing is an ideal place for the base unit.
“When I press the
PHONE or SPEAKERPHONE button, I hear
a loud noise.”
The strange noise is caused by interference. Disconnect
the mains power lead from the back of the Base unit,
then wait for 30 seconds before reconnecting it.
35
Troubleshooting continue...
“The volume in the
earpiece is low.”
Make sure to hold the earpiece correctly over your ear.
“The Caller Display
feature isn’t
working.”
You need to subscribe to Caller Display from your service
provider. Contact the service provider for details of how to
subscribe.
Adjust the volume as described in Section 5.
The caller may have withheld his number.
Or he may be calling from a network that does not transmit the Caller Display (ex., it may be an international call).
Check if your Handset is linked with the Base unit. If not,
you need to re-register the Handset.
If the display says BS SEARCH, make sure the mains
power lead is plugged into the back of the Base unit, and
the adapter is plugged into the mains socket with the
power switched on.
Intercom and transfer
“I can’t transfer a
call.”
Make sure the other Handset is within range from the
Base unit.
Make sure you are keying in the correct number (1 to 4)
for the other Handset.
Batteries
“The batteries are
running low within
an hour or two.”
Before initial use, charge the batteries up to 15 hours.
“The CHARGE light
on the Base unit does
not come on.“
Clean the battery charging contacts with a dry cloth.
You may need to replace the batteries.
Check the connections between the base unit and the
mains power socket.
36
Troubleshooting continue...
Answering Machine
“The machine won’t
record any
messages”
The machine’s memory may be full. You need to delete
enough recorded messages to free at least one minute
recording time. Or you can delete all recorded messages
to make room for new ones
Make sure the TAD SWITCH setting is set to ON- the
icon should appear on the LCD screen.
Make sure you have not selected ANS & REC on the
Answer mode setting- with ANS ONLY selected, callers
cannot leave messages (see page 19).
“Remote operation
doesn’t work.”
Make sure you are using the correct remote security
pin code.
Check that you are using a suitable tone-dialling phone.
Some cordless or mobile phones do not generate
continuous tones and so are not ideal for remote
operation.
Don’t leave more than 10 seconds between key
presses; otherwise, your call will be cut off.
37
Troubleshooting continue...
You need to replace the batteries. Please note the
following safety warnings:
„ Use only rechargeable batteries in the Handset. The
best way to make sure you get the right ones is to take
the old ones with you when you go to buy new ones.
„ Dispose of used batteries safely - never burn them, or
put them where they could get punctured.
“I try to recharge
the batteries, but
I still get a warning
that they are low.”
To de register a Handset
“How to de-register a
Handset from the Base
unit.”
Use the following procedure:
Press soft button Menu
Ö display shows HANDSET highlighted
Press DOWN button until BASE option is highlighted.
Press soft button Select
Ö display shows DIAL MODE
Press DOWN button until DE-REG HS
option is highlighted.
Press soft button Select to confirm
Ö display shows CONFIRM?
Press soft button OK to confirm
WARNING: You should not use this function unless
the Handset has lost registration.
If the fault persists …
„
„
Disconnect all other instruments connected to the same
line as the iDECT X2i and check if you can make a call.
Disconnect the Base unit from the telephone line and
plug a different phone into the master telephone socket.
Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone directly
into the socket. If the call now works, the adapter may be
faulty.
If you cannot make a call, the fault may be on the exchange
line. Contact the service provider (the your cabe company).
If you still cannot identify the cause of the problem,
contact the Help Line on 888 453 7440
Toll free from the US and Canada.
38
12. Guarantee
The iDECT X2i is guaranteed for 12 months from the date of purchase.
The guarantee does not cover damage by misuse or negligence, or by
excessive voltage.
If you think your iDECT X2 has developed a fault, please return
it to the shop where you bought it. Remember to take your sales (till)
receipt with you.
If you are not totally satisfied with any Binatone product, you may call
the Help line at 888-453-7440 for instructions on how to return, at your
expense, the product. The return address is
My-Tec Inc.
150 Stewart Pkwy.
Greensboro,
GA 30642.
39
13. Technical details
Standard
1.9GHz(Digital Enhanced Cordless Telecommunications)
Frequency
1.920~1.930 GHz
Channel Bandwidth
1.28MHz
Modulation type
GFSK
CID / CIDCW type
FSK CID type 1/2 + DTMF
Dialing mode
Tone (DTMF) / Pulse
Transmission speed
1.152 Mbps (Baud rate)
Duplexing
Time Division Duplex (TDD)
Speech encoding
ADPCM / 32kbit/s
RF Accessing
Time Division Multiple Access (TDMA)
RF Channel
5 channel
Coverage range
50m indoor; 300m open space
Base Power Supply
AC/DC adaptor:Input 100-240Vac;
Output 7.5Vdc 300mA
Handset Power Supply Ni-MH Rechargeable battery: 2.4V/ 600mAh
Charge Time initially
12 hours
Operation time
100 hours in standby; 10 hours in talk
Normal condition of use 0 C to 40 C
Storage Temperature -20 C to 60 C
40

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2006:06:08 03:32:14Z
Modify Date                     : 2008:04:11 11:08:11+08:00
Metadata Date                   : 2008:04:11 11:08:11+08:00
Creator Tool                    : PageMaker 6.5
Document ID                     : uuid:b491611a-3ea7-4bbf-a333-056f243ff7cf
Instance ID                     : uuid:afc9b507-06ea-4dda-8c2b-619c01307340
Format                          : application/pdf
Creator                         : tj
Title                           : ht420_d.p65
Has XFA                         : No
Page Count                      : 49
Author                          : tj

EXIF Metadata provided by EXIF.tools