Binatone Electronics MBP50PU Digital Video Baby monitor User Manual MBP50 IFU US EN

Download:
Mirror Download [FCC.gov]
Document ID	3501233
Application ID	wanH/wMpUhiw3wmY0pwREQ==
Document Description	User manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	392.14kB (4901790 bits)
Date Submitted	2017-08-08 00:00:00
Date Available	2017-08-08 00:00:00
Creation Date	2016-10-04 12:51:36
Producing Software	Acrobat Elements 10.0.0 (Windows)
Document Lastmod	2016-10-28 17:32:22
Document Title	MBP50_IFU_US_EN.book
Document Creator	FrameMaker 11.0
Document Author:	LiPing

User’s Guide
Digital Video Baby Monitor
Models: MBP50, MBP50-2, MBP50-3, MBP50-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing your new Motorola Digital Video Baby Monitor.
Now you can see and hear your baby sleeping in another room or you can
monitor your older children in their playroom.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to provide a
copy of your dated sales receipt to confirm warranty status. Registration is
not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you can use the Baby Monitor, we recommend you fully charge the
battery in the Parent Unit, so that it continues to work if you disconnect it
from the power supply to carry it to another location. Please read the
Safety Instructions on page 8 before you install the units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Power adapter for the Parent Unit
• 1 x Power adapter for the Baby Unit
In multi-camera packs, you will find one or more additional camera and
power adapter units.
Overview of the Parent Unit
12 13
14
15
16
17
10
11
Display (LCD screen)
VIDEO ON/OFF button V
Press to turn the LCD screen
ON/OFF
3. TALK button T
Press and hold to speak to your baby
4. RESET button (recessed - use
small pin)
5. UP button +
Normal Mode: Tilt Up
Menu Mode: Up
6. DOWN button Normal Mode: Tilt Down
Menu Mode: Down
7. MENU button M
Press to open the Menu options
8. OK button O
9. Micro USB power adapter
connector
10. LEFT button <
Normal Mode: Pan Left
Menu Mode: Left
11. RIGHT button >
Normal Mode: Pan Right
Menu Mode: Right
1.
2.
18
19
12. Power Adapter LED:
13.
14.
15.
16.
17.
18.
19.
BLUE when mains power
connected.
Unit ON/OFF LEDs (Green)
Audio Level LEDs (Green, Orange,
Red, Red)
Volume button
Press -/+ to decrease/increase
Volume level on Parent Unit
Power button 0
Press and Hold to turn the unit
ON/OFF
Microphone
Stand
Speaker
Parent Unit menu icons
Signal Level (5 Levels)
Night Vision Mode (Screen changes to Black/White)
Talk Mode
Battery Level Indication (4 Levels)
Pan Left
Pan Right
Tilt Up
Tilt Down
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Sound Selections)
Alarm Setting (6h, 4h, 2h, Off)
Temperature scale select (oC / oF)
Readings display in BLUE, but turn RED > 29ºC / 84ºF, or < 14ºC / 57ºF
Displays HH oC / oF if >36oC / 97oF.
Displays LL oC / oF if < 1oC / 34oF.
Camera Control (scan, view, add, delete)
Set Screen Off Timer (Off
, 5 min, 30 min, 60 min)
Indicates the screen off timer is set
Time Setting (Date, Time format 12/24 Hour and Time)
Volume Level Control (8 Levels)
No Baby Unit detected
View multiple cameras on screen. Available when you have more than 1
Baby Unit (Camera).
Overview of Your Baby Unit
ON / OFF
PAIR
10
1.
2.
3.
4.
5.
Photo Sensor (Night Vision Mode)
Camera Lens
Infrared LEDs (x 8, for night vision)
Power LED
Microphone
6. POWER ON/OFF switch
7. Speaker
8. PAIR button
9. Power Adapter Connector
10. Temperature Sensor
Important guidelines for installing your Baby Monitor
•
•
•
•
•
To use your Video Monitor Baby and Parent Units together, you must be able to establish a
radio link between them, and the range will be affected by environmental conditions.
Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or
reinforced concrete between the Baby and Parent Unit may block the radio signal.
The signal strength may also be reduced by other solid structures, like walls, or by radio
or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™
systems, or microwave ovens, may cause interference with this product, so keep the
Baby Monitor away at least 3 feet from these types of products, or turn them off if they
appear to be causing interference.
If the signal is weak, try raising the Parent Unit's Antenna, or moving the Parent and/or
the Baby Unit to different positions in the room(s).
Table of contents
1.
2.
Safety Instructions ..................................................................................... 7
Getting Started........................................................................................ 10
2.1
2.2
2.3
3.
Using the Baby Monitor........................................................................... 13
3.1
3.2
3.3
3.4
3.5
3.6
4.
Baby Unit Power Supply............................................................................ 10
Parent Unit Power Supply ......................................................................... 10
Registration (Pairing) ................................................................................ 12
Setting up .................................................................................................. 13
Pan and Tilt ................................................................................................ 13
Night Vision Mode .................................................................................... 13
Talk Mode.................................................................................................. 13
Video ON/OFF ......................................................................................... 13
Temperature Display (HH °C / °F or LL °C / °F)...................................... 14
Parent Unit Menu Options ...................................................................... 15
4.1
4.2
4.3
4.4
4.5
4.6
Volume ...................................................................................................... 15
Brightness .................................................................................................. 15
Lullaby ....................................................................................................... 15
Zoom ......................................................................................................... 15
Alarm ......................................................................................................... 15
Camera Control ........................................................................................ 16
4.6.1
Add (pair) a camera .................................................................. 16
4.6.2
View a camera ........................................................................... 16
4.6.3
Delete a camera ........................................................................ 17
4.6.4
Scan camera .............................................................................. 17
4.7 Temperature ............................................................................................. 17
4.8 Power Saving mode.................................................................................. 18
4.9 Time Setting .............................................................................................. 18
4.10 View multiple cameras on screen ............................................................ 18
5.
6.
7.
8.
Disposal of The Device (environment) ................................................... 19
Cleaning .................................................................................................. 20
Help.......................................................................................................... 21
General Information ................................................................................ 23
Table of contents
ENGLISH
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED in cords. Keep this cord
out of the reach of children (more than
3 feet away). Never use extension cords
with AC Adapters. Only use the AC
Adapters provided.
Safety Instructions
Baby Unit SET UP & USE:
● Choose a location for the Baby Unit that will provide the best view of
your baby in their crib.
● Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or
mount the Unit to a wall securely using the keyhole slot on the
underside of the stand.
● NEVER place the Baby Unit or cords inside your child's crib.
● Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
WARNING
This digital video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User’s Guide for future reference.
• Do not place the Baby Unit or cords in the crib or within reach of the baby
(the unit and cords should be more than 3 feet away)
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor near water.
Safety Instructions
ENGLISH
• Do not place the Baby Monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which
is not a user-accessible item. If you think the battery needs replacing, please
contact the helpline. Do not try to replace it yourself.
Risk of explosion if battery is replaced by an unapproved battery type.
Dispose of used batteries according to their instructions.
The Unit should be set up and used so that parts of the user's body other than the
hands are maintained at a distance of approximately 8 inches (20 cm) or more.
Safety Instructions
2. Getting Started
2.1
1.
Baby Unit Power Supply
Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable mains power outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2.
3.
2.2
Slide the POWER ON/OFF switch to the ON position. The power LED will
light up in red.
Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit
off.
Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithiumion battery 1880mAh), please charge it for 16 hours before initial use. The
battery is not a user-accessible item. Please contact the helpline if you think it
needs replacing.
10
Getting Started
Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable mains power outlet. Only use the enclosed
power adapter (5V DC / 1000mA) with the micro USB plug.
2. Press and hold the 0 POWER ON/OFF button for 3 seconds to turn ON
the Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the unit will beep every
few seconds. Move the Parent Unit closer to the Baby Unit until the link is
re-established.
5. Press and hold the 0 POWER ON/OFF button, until the progress bar
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon
turns RED to indicate that the battery is low, and the
parent unit will beep every 15 seconds. The battery needs to be recharged; it
will take16 hours to charge fully.
When charging
1.
2.
If the Parent Unit is turned OFF with the adapter plugged in, a 2-pin plug logo
will appear on-screen for about 5 seconds, and then a flashing battery logo
will display for 15 seconds. The Blue LED at the top left will light up; indicating
that the adapter is plugged in and charging is continuing.
Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Blue LED at the top left will light up to indicate that the adapter is plugged
in.
Getting Started
11
ENGLISH
1.
2.3
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1. Press the M button of the Parent Unit and the menu bar will pop up.
is highlighted, and
2. Press the < LEFT button or > RIGHT button until
del/
add/
view/
scan menu will pop up.
the
add, and press the
3. Press the + UP button or - DOWN button to select
O button to confirm.
4. Camera
/ / / will pop up, press the + UP button or - DOWN
button to select the desired Camera and press the O button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press the O button to confirm.
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and PAIR OK appears on the screen. The
video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will cancel its old registration.
12
Getting Started
3.1
ENGLISH
3. Using the Baby Monitor
Setting up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's camera by using the pan and tilt function
from the Parent Unit, to move up, down, left and right until you are satisfied
with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2
Pan and Tilt
The camera can be remotely controlled from the Parent Unit when in a camera
viewing mode.
1.
2.
3.3
Press the + UP button or - DOWN button to tilt up or down.
Press the < LEFT button or > RIGHT button to pan left or right.
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
icon will be displayed at the
top of the screen.
3.4
Talk Mode
Press and hold the T TALK button on the Parent Unit to talk to your baby through
the Baby Unit’s loudspeaker. The T icon will be displayed at the top of the LCD
screen.
3.5
Video ON/OFF
Press V VIDEO ON/OFF button to turn the LCD screen on or off, whilst still
leaving the audio monitor on.
Using the Baby Monitor
13
3.6
Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
14
Using the Baby Monitor
4.1
1.
4.2
1.
2.
3.
4.3
1.
2.
3.
4.
4.4
1.
2.
4.5
1.
2.
3.
4.
ENGLISH
4. Parent Unit Menu Options
Volume
Press the Volume button - or + to adjust the volume level, the
icon will
pop up and you can select the desired volume level from level 0~8. (The
default volume level setting is level 5, and level 0 is OFF.)
Brightness
Press the M button and the menu bar will pop up.
is highlighted.
Press the < LEFT button or > RIGHT button until
Press the + UP button or - DOWN button to select the desired brightness
level from level 1 ~ 8. (The default brightness level setting is level 4.)
Lullaby
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted.
Press the + UP button or - DOWN button to select from the 5 sounds
available. If a sound is selected, it will repeat continually until it is
unselected. (The default setting is lullaby OFF.)
Press O then + UP button or - DOWN button, when a sound is
selected, to adjust the playing volume at the Baby Unit Camera.
Zoom
Press the M button and the menu bar will pop up with highlighted.
Press the + UP button or - DOWN button to select the 1X or 2X Zoom.
(The default setting is 1X.)
Alarm
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until is highlighted.
Press the + UP button or - DOWN button to select the alarm time (6h, 4h,
2h). (The default setting is Alarm OFF.)
If an alarm time is selected, the Parent Unit will beep for about 45 seconds
after every 6, 4 or 2 hour period.
Parent Unit Menu Options
15
4.6
Camera Control
4.6.1
Add (pair) a camera
Press the M button and the menu bar will pop up.
is highlighted, and
Press the < LEFT button or > RIGHT button until
del/
add/
view/
scan menu will pop up.
the
add, and press the
3. Press the + UP button or - DOWN button to select
O button to confirm.
4. Camera
/ / / will pop up, press the + UP button or - DOWN
button to select the desired Camera, and press the O button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
1.
2.
4.6.2
1.
2.
3.
4.
View a camera
Press the M button and the menu bar will pop up.
is highlighted and
Press the < LEFT button or > RIGHT button until
del/
add/
view/
scan menu pops up.
the
view, and press the
Press the + UP button or - DOWN button to select
O button to confirm.
Camera
/ / / will pop up, press the + UP button or - DOWN
button to select the desired camera, and press the O button to view the
picture from that camera.
Note: Only camera locations with a * can selected.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press the O button repeatedly to select the available Camera
options from
scan .
/ / / ,
16
Parent Unit Menu Options
Delete a camera
Press the M button and the menu bar will pop up.
is highlighted, and
Press the < LEFT button or > RIGHT button until
del/
add/
view/
scan menu will pop up.
the
del , and press the
3. Press the + UP button or - DOWN button to select
O button to confirm.
4. Camera
will pop up, press the + UP button or - DOWN
/ / /
button to select the desired Camera, and press the O button.
5. Press the + UP button or - DOWN button to select , then press the
O button to delete that registration.
Note:
You are not allowed to delete the camera if there is only one registered camera
in the system.
1.
2.
4.6.4
Scan camera
This function is only available when you have more than 1 Baby Unit (Camera).
1.
2.
3.
4.
Press the M button and the menu bar will pop up.
is highlighted, and
Press the < LEFT button or > RIGHT button until
del/
add/
view/
scan menu will pop up.
the
scan, and press the
Press the + UP button or - DOWN button to select
O button to confirm.
The screen will then display images from different registered cameras in a
loop of Camera
/ / / , changing about every 12 seconds.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select the available Camera options from
scan.
/ / / ,
4.7
1.
2.
3.
Temperature
Press the M button and the menu bar will pop up.
is highlighted.
Press the < LEFT button or > RIGHT button until
Press the + UP button or - DOWN button to select °C or °F.
Parent Unit Menu Options
17
ENGLISH
4.6.3
4.8
Power Saving mode
Press the M button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until V is highlighted.
Press the + UP button or - DOWN button to select auto video off after
5 mins, 30 mins or 60 mins if operating on batteries only.
Note:
The audio will stay on and you can press any key to switch the video back on.
1.
2.
3.
4.9
1.
2.
3.
Time Setting
Press M, then < LEFT button or > RIGHT button until
is highlighted
and press the O button.
Press the < LEFT button or > RIGHT button to move between the settings.
Press the + UP button or - DOWN button to alter Date, Time format and
Time, then press the O button to confirm the setting.
4.10
View multiple cameras on screen
This function is only available when you have more than 1 Baby Unit (Camera).
When the Split Screen function is On, you can view multiple cameras on the
screen.
1.
2.
3.
4.
Press the M button and the menu bar will pop up.
is highlighted.
Press the < LEFT button or > RIGHT button until
Press+ UP button or - DOWN button to select Split Screen On / Off .
When the Split Screen function is On, you can press the < LEFT button/
> RIGHT button/ + UP button/ - DOWN button to switch between
cameras to hear the audio from the selected camera.
18
Parent Unit Menu Options
ENGLISH
5. Disposal of The Device (environment)
At the end of the product lifecycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user's guide and/or
box indicates this.
Some of the product materials can be reused if you take them to
a recycling point. By reusing some parts or raw materials from used products
you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the
collection points in your area.
The internal battery should be disposed of with the Parent unit in an
environmentally-friendly manner according to your local regulations.
Disposal of The Device (environment)
19
6. Cleaning
Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the product with thinners or other solvents and
chemicals – this may cause permanent damage to the product which is not
covered by the warranty.
• Keep the Baby Monitor away from hot, humid areas or strong sunlight, and
don't let it get wet.
• Every effort has been made to ensure high standards of reliability for your
Baby Monitor. However, if something does go wrong, please do not try to
repair it yourself – contact Customer Service for assistance.
20
Cleaning
ENGLISH
7. Help
Display
No display
• Try recharging or press the RESET button once.
• Reset the units. Press the RESET button once on the Parent Unit and unplug
both the units' electrical power, then plug them back in.
• Is the unit turned on?
Press and hold the ON/OFF button 0 on the Parent Unit to turn it ON.
• Is the correct camera selected?
Change the camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF button V to turn it on.
• When operating using batteries only, the Display will go blank after
5 minutes or 30 minutes or 60 minutes to save power (depending on video
settings). The unit is still active and will give you audio alerts. You can
reactivate the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or press the RESET button once on the Parent Unit.
• If the Baby Unit is too far away it may be going out of range, so move the
Baby Unit closer to the Parent Unit.
• Reset the units by disconnecting the Baby Unit from electrical power and
press the RESET button once on the Parent Unit. Wait about 15 seconds
before reconnecting. Allow up to one minute for the Baby Unit and the
Parent Unit to synchronize.
• See 2.3 Registration (Pairing), if there is a need to re-register the units.
Help
21
Interference
Noise interference on your Parent Unit
• Your Baby and Parent Units may be too close. Move them farther apart.
• Make sure there is at least 3 to 6 feet between the 2 units to avoid audio
feedback.
• lf the baby unit is too far away it may be out of range, so move the Baby Unit
closer to the Parent Unit.
• Make sure the Baby and Parent Units are not near other electrical equipment,
such as a television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers),
Bluetooth™ systems, or microwave ovens, may cause interference with this
product, so keep the baby monitor away at least 1.5m (5ft) from these types
of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.
22
Help
ENGLISH
8. General Information
lf your product is not working properly....
1.
Read this User's Guide or the Quick Start Guide.
2.
Contact Customer Service:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
If you think you need a battery replacement, please contact customer service.
Consumer Products and Accessories Limited Warranty
("Warranty")
Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold
for use with this product that it manufactured to be free from defects in materials
and workmanship under normal consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is not transferable.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE
OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR
CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR
REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR
COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED
WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY
SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL
UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF
YOUR COUNTRY, PROVINCE OR STATE.
General Information
23
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that does not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
24
General Information
Length of Coverage
One (1) year from the date of the
products original purchase by the first
consumer purchaser of the product.
Consumer Accessories
Ninety (90) days from the date of the
accessories original purchase by the first
consumer purchaser of the product.
Consumer Products and Accessories The balance of the original warranty or
that are Repaired or Replaced
for Ninety (90) days from the date
returned to the consumer, whichever is
longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage (cracks,
scratches, etc.) to the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
General Information
25
ENGLISH
Products Covered
Consumer Products
Unauthorized Service or Modification. Defects or damages resulting from
service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than MOTOROLA, BINATONE or its
authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that
have been removed, altered or obliterated; (b) broken seals or that show evidence
of tampering; (c) mismatched board serial numbers; or (d) nonconforming or nonMotorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller of
the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete warranty agreement
between you and BINATONE regarding the Products or Accessories purchased
by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials
issued by BINATONE or representations made by any agent, employee or staff
of BINATONE, that may have been made in connection with the said purchase.
26
General Information
FCC Part l5
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Privacy of communications
may not be ensured when using this device.
To ensure safety of users, the FCC has established criteria for the amount of radio
frequency energy that can be safely absorbed by a user or bystander according to
the intended usage of the product. This product has been tested and found to
comply with the FCC criteria. The Baby Unit shall be installed and used such that
parts of the user’s body other than the hands are maintained at a distance of
approximately 8 inches (20 cm) or more.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/NMB-3(B)
General Information
27
ENGLISH
FCC and IC regulations
WARNING
Changes or modifications to this equipment not expressively approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
FCC/IC RF Radiation Exposure Statement Caution: This Transmitter must be
installed to provide a separation distance of at least 20 cm from all persons.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s):
Operation is subject to the following Two conditions:(1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
The term "IC: " before the certification/registration number only signifies that
the Industry Canada technical specifications were met. This product meets the
applicable Industry Canada technical specifications.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Déclaration d'exposition Attention: Cet émetteur doit être installé
pour fournir une distance de séparation d'au moins 20 cm de toute personne.
28
General Information
ENGLISH
Technical Specifications
Baby Unit (MBP50BU)
Frequency
2.4 GHz to 2.48 GHz
Image sensor
color CMOS 1M Pixels
Operating Temperature
IR LED
0oC - 45oC
8 pcs
Power Adapter
Ten Pao International Ltd.
S006AKU0500100
Input: 100-240V AC, 50/60Hz, 200mA;
Output: 5.0V DC, 1000mA
WARNING
Use only with supplied power supply.
General Information
29
Parent Unit
Frequency
2.4 GHz to 2.48 GHz
Display
5" diagonal TFT LCD
Display colors
16.7M color LCD
Operating Temperature 0oC - 45oC
Brightness control
8 steps
Volume control
Power Adapter
8 steps
Ten Pao International Ltd.
S006AKU0500100
Input: 100-240V AC, 50/60Hz, 200mA;
Output: 5.0V DC, 1000mA
WARNING
Use only with provided power supply.
Battery (built-in)
LG Chemical Limited (Motorola BF6X)
3.7V, 1880mAh Lithium-Ion Polymer, rechargeable
battery pack
WARNING
Do not attempt to replace the battery, but contact
Customer Service if it needs replacing.
30
General Information
Manufactured, distributed or sold by Binatone Electronics
International LTD., official licensee for this product. MOTOROLA
and the Stylized M Logo, are trademarks or registered trademarks
of Motorola Trademark Holdings, LLC. and are used under
license. All other trademarks are the property of their respective
owners. © 2016 Motorola Mobility LLC. All rights reserved.
EN_US Version 1.0
Printed in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : LiPing
Title                           : MBP50_IFU_US_EN.book
Create Date                     : 2016:10:04 12:51:36Z
Creator Tool                    : FrameMaker 11.0
Modify Date                     : 2016:10:28 17:32:22+08:00
Metadata Date                   : 2016:10:28 17:32:22+08:00
Producer                        : Acrobat Elements 10.0.0 (Windows)
Document ID                     : uuid:586edc16-c59e-4c7d-8f05-a77e2986b8ae
Instance ID                     : uuid:db8b9ab5-1ee0-4873-9ef9-00b1d8a4d384
Page Mode                       : UseOutlines
Page Count                      : 31
Author                          : LiPing

EXIF Metadata provided by EXIF.tools