Binatone Electronics MBP854HDSPU Digital Baby Monitor (Parent Unit) User Manual I

Binatone Electronics International Ltd. Digital Baby Monitor (Parent Unit) I

Contents

User Manual I

Users GuideDigital Video Baby Monitor With Wi-Fi® Internet ViewingModels: MBP854CONNECT, MBP854CONNECT-2,MBP854CONNECT-3, MBP854CONNECT-4The features described in this Users Guide are subject to modifications without prior notice.
Welcome...to your new Motorola Digital Video Baby Monitor!Thank you for purchasing your new Motorola Digital Video Baby Monitor.Now you can see and hear your baby sleeping in another room or you canmonitor your older children in their playroom.Please retain your original dated sales receipt for your records.For warranty service of your Motorola product, you will need to provide acopy of your dated sales receipt to confirm warranty status. Registration isnot required for warranty coverage.For product related questions, please call:This User's Guide provides you with all the information you need to get themost from your product.Before you can use the Baby Monitor, we recommend you fully charge thebattery in the Parent Unit, so that it continues to work if you disconnect itfrom the power supply to carry it to another location. Please read theSafety Instructions on page 8 before you install the units.Got everything? 1 x Parent Unit 1 x Baby Unit (Camera) 1 x Power adapter for the Parent Unit 1 x Power adapter(s) for the Baby UnitIn multi-camera packs, you will find one or more additional camera unitswith power adapter units and battery packs.US and Canada 1-888-331-3383Email: support@motorolamonitors.com
Overview of the Parent Unit1. Display (LCD screen)2. Video ON/OFF Key VPress to turn the LCD display ON/OFF3. Talk Key TPress and hold to speak to your baby4. Up Key +Normal Mode: Tilt UpMenu Mode: Up5. Down Key -Normal Mode: Tilt DownMenu Mode: Down6. Microphone7. Menu Key MPress to open the Menu options8. OK Key O9. Left Key <Normal Mode: Pan LeftMenu Mode: Left10. Right Key >Normal Mode: Pan RightMenu Mode: Right11. Power Adapter / Battery LED BLUEwhen connected to an electricaloutlet.RED when battery low.12. Unit ON/OFF LED (Green)13. Audio Level LED (Green, Orange,Red)14. Power Key 0Press and Hold to turn the unit ON/OFF15. Volume KeyPress -/+ to decrease/increaseVolume level on Parent Unit16. Reset Key17. SD Card socket18. Micro USB Socket19. Stand20. Speaker21. AntennaRaise the antenna for optimalreception
Parent Unit menu iconsSignal Level (4 Levels)Night Vision Mode (Screen changes to Black/White)Talk ModeBattery Level Control (4 Levels)Pan LeftPan RightTilt UpTilt DownZoom Level Control (1X, 2X)Brightness Level Control (8 Levels)Lullaby Control (5 Song Selections)Alarm Setting (6h, 4h, 2h, Off)Temperature Reading (HH ºC / ºF or LL ºC / ºF)Icon & readings turn RED > 29ºC / 84ºF, and reading displayHH ºC / ºF > 36ºC / 97 ºFIcon & readings turn RED < 14ºC / 57ºF, and reading displayLL ºC / ºF < 1ºC / 34 ºFCamera Control (scan, view, add, delete)Local Recording (Record, Play)Set Video On Timer (5 min, 30 min, 60 min)Time Setting (Date, Time format 12/24 Hour and Time)Volume Level Control (8 Levels)SD Card detectionNo Baby Unit detected
Important guidelines for installing your Baby Monitor To use your Video Monitor Baby and Parent Units together, you must be able to establish aradio link between them, and the range will be affected by environmental conditions. Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors orreinforced concrete between the Baby and Parent Unit may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radioor electrical equipment, such as TVs, computers, cordless or mobile phones,fluorescent lights or dimmer switches. Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth®systems, or microwave ovens, may cause interference with this product, so keep theBaby Monitor away at least 3ft from these types of products, or turn them off if theyappear to be causing interference. If the signal is weak, try raising the Parent Unit's Antenna, moving the Parent and/or theBaby Unit to different positions in the room(s).1. Light Sensor (for night mode detection) 7. Speaker2. Camera Lens 8. Antenna3. Infrared LEDs (for night vision) 9. Micro USB socket4. Power / Status indicator 10. ON/OFF Switch5. Microphone 11. Temperature Sensor6. PAIR ButtonOverview of Your Baby Unit
6Table of contentsTable of contents1. Safety Instructions..................................................................................... 82. Getting Started........................................................................................ 112.1 Baby Unit Power Supply............................................................................ 112.2 Parent Unit Power Supply ......................................................................... 112.3 Registration (Pairing) ................................................................................ 133. Using the Baby Monitor........................................................................... 143.1 Setting up .................................................................................................. 143.2 Pan and Tilt ................................................................................................ 143.3 Night Vision Mode .................................................................................... 143.4 Talk Mode.................................................................................................. 143.5 Video ON/OFF ......................................................................................... 143.6 Temperature Display (HH °C / °F or LL °C / °F)...................................... 154. Parent Unit Menu Options ...................................................................... 164.1 Volume ...................................................................................................... 164.2 Brightness.................................................................................................. 164.3 Lullaby ....................................................................................................... 164.4 Zoom ......................................................................................................... 164.5 Alarm ......................................................................................................... 164.6 Camera Control ........................................................................................ 174.6.1 Add (pair) a camera .................................................................. 174.6.2 View a camera ........................................................................... 174.6.3 Delete a camera ........................................................................ 184.6.4 Scan camera .............................................................................. 184.7 Temperature ............................................................................................. 184.8 Power Saving mode.................................................................................. 184.9 Video ......................................................................................................... 194.10 Time Setting .............................................................................................. 195. Wi-Fi Internet Viewing ............................................................................205.1 Minimum System Requirements .............................................................. 205.2 Getting started - Connecting Devices ..................................................... 215.3 User Account and Camera Setup on Android Devices....................... 225.3.1 Power ON and Connect the Camera ...................................... 225.3.2 Download the Hubble App ....................................................... 225.3.3 Run the Hubble App on Android device ............................. 235.3.4 Add Camera to your account ................................................... 24
Table of contents 75.4 User Account and Camera Setup:Working with iPhone®/iPad®................................................................... 285.4.1 Power ON and Connect the Camera ...................................... 285.4.2 Download the Hubble App .......................................................285.4.3 Run the Hubble App on your iPhone®/iPad® ......................... 295.4.4 Add the Camera to your account ............................................. 305.5 Camera Functions:Working with devices for Android.......................................................355.5.1 Connecting the Camera to Power ...........................................355.5.2 Add more cameras .................................................................... 355.5.3 Remove a Camera ....................................................................365.5.4 Change your Account Information ..........................................375.5.5 Camera settings ........................................................................ 385.5.6 General Settings ........................................................................ 395.5.7 Features of the Hubble App ..................................................... 405.6 Camera Functions:Working with devices for iPhone®/iPad®............................................... 445.6.1 Add more cameras .................................................................... 445.6.2 Remove a Camera ....................................................................455.6.3 Change your Account Information ..........................................465.6.4 Camera settings ........................................................................ 475.6.5 General settings ........................................................................ 485.6.6 Hubble App Settings .................................................................495.6.7 Features of the Hubble App ..................................................... 505.7 Camera Functions:Working with PC/Notebook..................................................................... 545.8 Procedure for Resetting the Camera .......................................................546. Disposal of The Device (environment) ...................................................557. Cleaning .................................................................................................. 568. Help.......................................................................................................... 579. General Information ................................................................................ 65
8Safety Instructions1. Safety InstructionsWARNING:Strangulation Hazard: Children haveSTRANGLED in cords. Keep this cordout of the reach of children (more than3ft (1m) away). Never use extensioncords with AC Adapters. Only use the ACAdapters provided.
Safety Instructions 9WARNINGThis digital video Baby Monitor is compliant with all relevant standardsregarding electromagnetic fields and is, when handled as described in theUser's Guide, safe to use. Therefore, always read the instructions in this User'sGuide carefully before using the device. Adult assembly is required. Keep small parts away from children whenassembling. This product is not a toy. Do not allow children to play with it. This Baby Monitor is not a substitute for responsible adult supervision. Keep this Users Guide for future reference. Do not place the Baby Unit or cords in the crib or within reach of the baby(the unit and cords should be more than 3 feet away) Keep the cords out of reach of children. Do not cover the Baby Monitor with a towel or blanket. Never use extension cords with power adapters. Only use the poweradapters provided. Test this monitor and all its functions so that you are familiar with it prior toactual use. Do not use the Baby Monitor near water.Baby Unit SET UP & USE:Choose a location for the Baby Unit that will provide the best view ofyour baby in their crib.Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf ormount the Unit to a wall securely using the keyhole slots on theunderside of the stand.NEVER place the Baby Unit or cords inside your child's crib.Do not place the Baby Unit or cords in the crib or within reach of thebaby (the unit and cords should be more than 3 feet away).
10 Safety Instructions Do not place the Baby Monitor near a heat source. Only use the chargers and power adapters provided. Do not use otherchargers or power adapters as this may damage the device and batterypack. Do not touch the plug contacts with sharp or metal objects.CAUTIONRisk of explosion if battery is replaced by an unapproved battery type.Dispose of used batteries according to their instructions.The Unit shall be setup and used so that parts of the user's body other than thehands are maintained at a distance of approximately 8 inches (20 cm) or more.
Getting Started 112. Getting Started2.1 Baby Unit Power Supply1. Connect the small plug of the power adapter to the Baby Unit (camera) andthe other end to a suitable electrical outlet.NOTEOnly use the enclosed power adapter (5V DC / 1500mA).2. Slide the ON/OFF switch to the ON position. The power LED will light upin blue.3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.2.2 Parent Unit Power SupplyIMPORTANTThe Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-ion battery 1880mAh), please charge it for 16 hours before use.1. Connect the micro USB plug of the power adapter to the Parent Unit andthe other end to a suitable electrical outlet. Only use the enclosed poweradapter (5V DC / 1500mA) with the micro USB plug.Switch to turn ONthe cameraPower adapter plug
12 Getting Started2. Press and hold the 0 POWER ON/OFF button for 1 second to turn ON theParent Unit.3. Once the Baby and Parent Units are switched on, the display on the ParentUnit will show the video captured by the Baby Unit.4. If there is no connection or you are out of range, the video display will turn5. off and the unit will beep every 5 seconds. Move the Parent Unit closer to6. the Baby Unit until the link is re-established.7. Press and hold the 0 POWER ON/OFF button, until the progress barfinishes scrolling, to turn OFF the Parent Unit.NOTEThe battery icon turns RED to indicate that the battery is low, and theparent unit will beep every 15 seconds. The battery needs to be recharged; itwill take12 hours to charge fully.When charging1. Whilst the power is OFF, and the adapter is plugged in, an adapter logo willappear on-screen and a flashing battery logo will display for 15 seconds. TheBlue LED at the top left corner will light up; indicating that the adapter isplugged in.2. Whilst the power is ON, and the adapter is plugged in, the battery icon atthe top right corner of the screen will show that the battery is charging. TheBlue LED at the top left corner will light up to indicate that the adapter isplugged in.
Getting Started 132.3 Registration (Pairing)The Baby Monitor is pre-registered to your Parent Unit. You do not need toregister it again unless the Baby Unit loses its link with the Parent Unit.To re-register your Baby Unit, or register a new Baby Unit, follow the proceduresbelow:1. Press the Mbutton of the Parent Unit and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted, andthe del/ add/ view/ scan menu will pop up.3. Press the + UP button or - DOWN button to selectadd, and press theO button to confirm.4. Camera will pop up, press the + UP button or - DOWNbutton to select the desired Camera and press the Obutton to startsearching for a camera unit. The green audio level LED will flash rapidlywhile searching.5. Press the Obutton to confirm.6. Press and hold the PAIR button underneath the Baby Unit until the ParentUnit finds the camera, beeps and the video from the camera appears.NOTEIf a particular Baby Unit was registered previously, registering this currentBaby Unit again will overwrite the old registration.+
14 Using the Baby Monitor3. Using the Baby Monitor3.1 Setting up Place the Baby Unit in a convenient location (e.g. on a table) and point thecamera lens towards the area you want to monitor. Adjust the angle of the Baby Unit's head by rotating the camera up, down, leftand right until you are satisfied with the image shown on the Parent Unit.NOTEDo not place the Baby Unit within the baby's reach! If there is interference withthe picture or sound, try moving the units to different locations, and ensure theyare not close to other electrical equipment.3.2 Pan and TiltThe camera can be remotely controlled from the Parent Unit.1. Press the + UP button or - DOWN button to tilt up or down.2. Press the < LEFT button or > RIGHT button to pan left or right.3.3 Night Vision ModeThe Baby Unit has 8 high-intensity infrared LEDs for picking up clear images inthe dark. When the built-in photo sensor on the top of the unit detects a low levelof ambient light, the LEDs will automatically activate and the screen on theParent Unit will display in black and white. The icon will be displayed at thetop of the screen.3.4 Talk ModePress and hold the TTALK button on the Parent Unit to talk to your baby throughthe Baby Units loudspeaker. The Ticon will be displayed at the top of the LCDscreen.3.5 Video ON/OFFPress V VIDEO ON/OFF key to turn the LCD display on or off, whilst stillleaving the audio monitor on.
Using the Baby Monitor 153.6 Temperature Display (HH °C / °F or LL °C / °F)The temperature reading from the temperature sensor at the back of the BabyUnit will be displayed at the top of the LCD screen. The readings will turn RED ifthe temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading willchange to HH °C / °F if the temperature goes above 36°C / 97°F. The readingwill change to LL °C / °F if the temperature goes below 1°C / 34°F.
16 Parent Unit Menu Options4. Parent Unit Menu Options4.1 Volume1. Press the Volume button - or + to adjust the volume level, the icon willpop up and you can select the desired volume level from level 0~8. (Thedefault volume level setting is level 4.)4.2 Brightness1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted.3. Press the + UP button or - DOWN button to select the desired brightnesslevel from level 1 ~ 8. (The default brightness level setting is level 5.)4.3 Lullaby1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted.3. Press the + UP button or - DOWN button to select the desired song fromthe 5 lullabies available, or the cycle option to play all 5 songs in turn. If anindividual song is selected it will only play once. (The default setting islullaby OFF.)4. Press O on the selected lullabies to select the desired song sound level.4.4 Zoom1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted.3. Press the + UP button or - DOWN button to select the1X or2X Zoom.(The default setting is 1X.)4.5 Alarm1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted.3. Press the + UP button or -DOWN button to select the alarm time (6h,4h,2h). (The default setting is Alarm OFF.)4. If an alarm time is selected, the Parent Unit will beep for about 45 secondsafter every 6, 4 or 2 hour period.
Parent Unit Menu Options 174.6 Camera Control4.6.1 Add (pair) a camera1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted, andthe del/ add/ view/ scan menu will pop up.3. Press the + UP button or - DOWN button to select add, and press theO button to confirm.4. Camera will pop up, press the + UP button or - DOWNbutton to select the desired Camera, and press the O button to startsearching for a camera unit. The green audio level LED will flash rapidlywhile searching.5. Press and hold the PAIR button on the underside of the Baby Unit until theParent Unit finds the camera, beeps and the picture from the camera appears.NOTEA camera can only be registered to one Parent Unit at any one time.4.6.2 View a camera1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted andthe del/ add/ view/ scan menu pops up.3. Press the + UP button or - DOWN button to select view, and press theO button to confirm.4. Camera will pop up, press the + UP button or - DOWNbutton to select the desired camera, and press the O button to view thepicture from that camera.TIPQuick Method to View Cameras instead of entering into the menu bar.Directly press OK repeatedly to select Camera , scan.
18 Parent Unit Menu Options4.6.3 Delete a camera1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted, andthe del/ add/ view/ scan menu will pop up.3. Press the + UP button or - DOWN button to select del, and press theO button to confirm.4. Camera will pop up, press the + UP button or - DOWNbutton to select the desired Camera, and press the O button to deletethat registration.Note:You are not allowed to delete the camera if there is only one registered camerain the system.4.6.4 Scan camera1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted, andthe del/ add/ view/ scan menu will pop up.3. Press the + UP button or - DOWN button to select scan, and press theO button to confirm.4. The screen will then display images from different registered cameras in aloop of Camera , changing about every 12 seconds.TIPQuick Method to View Cameras instead of entering into the menu bar.Directly press OK repeatedly to select Camera , scan.4.7 Temperature1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted.3. Press the + UP button or - DOWN button to select °C or °F.4.8 Power Saving mode1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until V is highlighted.3. Press the + UP button or - DOWN button to select auto video off after5 mins, 30 mins or 60 mins if not in charging.
Parent Unit Menu Options 194.9 VideoYou can record a video of your baby with this function. The videos will be storedon the SD Memory Card, so please ensure the memory card has enough freememory.1. Press the M button and the menu bar will pop up.2. Press the < LEFT button or > RIGHT button until is highlighted.3. Press the + UP button or - DOWN button to select , and press Obutton to start video recording, thence select press and press Obutton to stop.4. Press the + UP button or - DOWN button to select and press Obutton to play back the video.Note:The video format is AVI which you can view on a computer/smartphone/tablet4.10 Time Setting1. Press the < LEFT button or > RIGHT button until is highlighted andpress O Button.2. Press the < LEFT button or > RIGHT button to move between the settings.3. Press the + UP button or - DOWN button to set Date, Time format andTime.
20 Wi-Fi Internet Viewing5. Wi-Fi Internet Viewing5.1 Minimum System RequirementsWeb Portal Windows® 7 Mac OS® 10.7 Chrome 24 Internet Explorer® 9 Safari® 6 Java 7 Firefox® 18.0 Adobe® Flash® Player 15.0Android System Version 4.2 or aboveiPhone®/iPad® iOS Version 7.0 or aboveWi-Fi requirements: At least 0.6 Mbps upload bandwidth per camera. Test your Internet speed at:http://www.speedtest.net/
Wi-Fi Internet Viewing 215.2 Getting started - Connecting DevicesHow does it work?When a user tries to access the Camera, our secure server authenticates theusers identity and permits access to the Camera.SetupConnect the camera to the power adapter, then plug into a suitable electricaloutlet and make sure the power switch is in the ON position. The Camera mustbe within range of the Wi-Fi® router with which you want to connect. Make surethe password of the router is available for entering during the in-app setupprocess.Status of LED Indication:- Pair / Setup state: LED is red and blue and flashing slowly- Unconnected state: LED is red and flashing slowly- Connected state: LED is blue and always on- Ready for connection state: LED is blue and flashing slowlyNote: You can only setup via a compatible smartphone or tablet and not via a PC.View your Camera from anycompatible device remotely
22 Wi-Fi Internet Viewing5.3 User Account and Camera Setup on AndroidDevicesWhat you need MBP854CONNECT camera The power adapter for the Camera Device with Android system version 4.2 or above5.3.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into themicro USB socket on the back of the Camera. Make sure that the ON/OFF switch is in the ON position. The Cameras Red LED flashes after the Camera has finished booting. Whenyou hear two beeps this means the Camera is ready to setup.5.3.2 Download the Hubble App Go to the Google Play Store to search Hubble for Motorola Monitors. Download the Hubble for Motorola Monitors App from the Google PlayStore and install it on your Android device.
Wi-Fi Internet Viewing 235.3.3 Run the Hubble App on Android device Ensure your Android device is connected to your Wi-Fi® router. Run the Hubble App and key in your Hubble App account information, readthrough the Terms of Service then select I agree to the Terms of Use beforeyou tap on Create. (Picture A1)Note: If you have a Hubble account, please select Already have a Account? togo to the next step.A1
24 Wi-Fi Internet Viewing5.3.4 Add Camera to your account Create a new account and Login. Tap on Add Camera. (Picture A2) Tap on Continue. (Picture A3) The setup instructions will appear on the following screen. (Picture A4)A2 A3A4
Wi-Fi Internet Viewing 25 Press and hold the PAIR button for 3 seconds at the side of the Camera, youwill then hear a beep tone and a voice saying "Ready for pairing" from theCamera Unit. Tap on Search for Camera. The App will automatically search for and connect to your Camera as shownin the pictures below (A5 & A6) and the blue/red color LED on the Camerawill flash.A5 A6
26 Wi-Fi Internet Viewing Select your Wi-Fi® Network and tap Continue, enter your password then tapon Connect. (Picture A7, A8) It will take a few minutes for the Camera to connect to the Wi-Fi® networkbefore showing the connection status (Picture A9, A10). If connection fails,please tap on the Retry button and repeat the steps starting from 5.3.4.A7 A8A9 A10
Wi-Fi Internet Viewing 27 Tap on Watch Live Camera to view the Camera video, the Camera's BlueLED will flash. (Picture A11) Tap on the Hubble logo and go back to the Camera list. (Picture A12)A11 A12
28 Wi-Fi Internet Viewing5.4 User Account and Camera Setup:Working with iPhone®/iPad®What you need MBP854CONNECT camera The power adapter for the Camera iPhone® / iPad® with iOS 7.0 version or up5.4.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into themicro USB socket at the back of the Camera. Make sure that the ON/OFF switch is in the ON position. The Camera's red LED flashes after the Camera has finished booting. Whenyou hear two beeps, this means the Camera is ready for setup.5.4.2 Download the Hubble App Go to the App Store to search for Hubble for Motorola Monitors. Download the Hubble for Motorola Monitors App and install it on youriPhone®/iPad®.
Wi-Fi Internet Viewing 295.4.3 Run the Hubble App on your iPhone®/iPad® Ensure your iPhone®/iPad® is connected to your Wi-Fi® Router. Run the Hubble App and key in your account information, read through theTerms of Service then select I agree to the Terms of Service before you tapon Create. (Picture i1)Note: If you have a Hubble account, please select Already have a Account? togo to the next step.i1
30 Wi-Fi Internet Viewing5.4.4 Add the Camera to your account Create a new account and Login. Tap on Add Camera. (Picture i2) Tap on MBP854CONNECT. (Picture i3) Follow the instruction on screen to turn on the Bluetooth function of youriPhone/iPad.i2 i3FOCUS85 /SCOUT66 /MBP854Blink83 / Scout83 /MBP36HDi4
Wi-Fi Internet Viewing 31 Tap on the Home button, then enter the Settings menu to turn on theBluetooth function of your iPhone/iPad. Press the HOME key to exit the Settings menu and tap on the Hubble forMotorola Monitors App to enter the start up screen.i5 i6i7
32 Wi-Fi Internet Viewing Tap on Continue and follow the instructions below. (Pictures i4-i7)i4 i5
Wi-Fi Internet Viewing 33 Follow the steps above to locate the camera with identification numberCameraHD-xxxxxxxxxx, then tap on Continue once your iPhone® or iPad®has connected to the camera. (Picture i8) Select your Wi-Fi® Network and tap Continue, enter your password andthen tap Next. (Pictures i9, i10)i8i9 i10
34 Wi-Fi Internet Viewing It will take a few minutes for the Camera to connect to the Wi-Fi® networkbefore showing the connection status (Pictures i11, i12). If connection fails,please tap on the Retry button and repeat Step 5.4.4 as instructed above. Tap on Watch Live Camera to view the Camera video. (Picture i13) Tap on Hubble logo to go back to Camera list. (Picture i14)i11 i12i13 i14
Wi-Fi Internet Viewing 355.5 Camera Functions:Working with devices for Android5.5.1 Connecting the Camera to Power Insert the small end of the Power Adapter into the Power Adapter Connectorand plug the Power Adapter into a suitable electrical outlet. Slide the ON/OFF switch to ON, the blue Power LED will light up. (Note: Toswitch the device off, slide the ON/OFF switch to OFF.) Run the Hubble App on your Android device. The Camera view appears on the screen.5.5.2 Add more cameras On Camera view, tap on the Hubble logo to go back to the Add Camerapage. (Picture A13) Tap on Add Camera to add more Cameras by following the steps for Androiddevice setup Section 5.3.4. (Picture A14) Once the Camera has been added, the Camera view will be automaticallydisplayed.A13 A14
36 Wi-Fi Internet Viewing5.5.3 Remove a CameraYou can remove a Camera from your account by following these steps: Tap the Settings icon on the General page, then tap on Camera Detail.(Picture A15) Select Remove Camera and tap on Yes to delete the unit from camera list.(Picture A16)A15 A16
Wi-Fi Internet Viewing 375.5.4 Change your Account InformationYou can change the account information using your Android device. Tap Account on the General page, the Account Settings appears on screen.(Picture A17) Tap on Change Password to change your password following the instructions. Tap on Log Out to leave the account. Tap on Freemium plan, it will go to the link of Cloud Video RecordingService, to obtain more information, please visit our websitehttp://www.hubbleconnected.com. Tap on Use Remote Only to access Remote Connection Setting , confirmUse Remote Only by Selecting Yes.Enable Disconnect Alert , when disconnect it will be "beeps" alert,enablethe disconnect Alert by selecting Yes. Tap on Send Log to send your Hubble Android App report to our server viae-mail; this should be sent if requested by a customer service agent.A17
38 Wi-Fi Internet Viewing5.5.5 Camera settingsYou can change the Camera settings by tapping the Settings icon on theCamera list screen/page. (Picture A18) Tap on Camera Details to review Camera Name, Change Image, Firmwareversion, Model ID and Remove Camera. (Picture A19) Tap on Notification Sensitivity to set the sensitivity of sound & motiondetection, and to set an Alert of High/Low temperature. (Picture A20)A18 A19A20
Wi-Fi Internet Viewing 395.5.6 General Settings Tap Settings on the General page. Tap on General Settings to shift the format of the Clock (12hr/24hr) & theTemperature (°C / °F) and activate Notification Sound or Vibration. (PictureA21) Tap on Do Not Disturb, set the timer to the desired time and select ON, theCamera will not send any sound or alert to your Android device for theduration of your setting. (Picture A22)A21 A22
40 Wi-Fi Internet Viewing5.5.7 Features of the Hubble AppTap on the viewing area and the function icons will appear as shown below.Two Way Communication Tap on to activate the function. Press theround button once to speak through the Camera. Toggle the button again tolisten to the audio feedback from the Camera. (Pictures A23, A24)A23 A24
Wi-Fi Internet Viewing 41Pan and Tilt Function:Tap the up and down buttons to tilt, the left and right buttons to pan. (PicturesA25, A26)A25 A26
42 Wi-Fi Internet ViewingPhoto/Video - Take a photo or record a video from your Camera.Tap the Video icon to activate the Video function and press the red button tostart and release to stop recording. (Pictures A27, A28)Tap the Camera icon to switch to Camera mode, you can capture photosfrom the Camera view. (Picture A29)A27 A28A29
Wi-Fi Internet Viewing 43Note:Photos and videos will be stored on the internal flash memory of your Androiddevice, and can be accessed via the Gallery or Media Player. To play videos,please use the Hubble App or a 3rd party application, such as MX player (foundin the Google Play Store), which is able to play MJPG (Motionjpeg) files.Melody To play one of the pre-set 5 melodies, tap on Melody to show theMelody menu and select the one you prefer to play on your Camera. (Picture A30)Temperature Measure The temperature reading from the temperaturesensor at the back of the Camera will display on your Android device screen(Picture A31). The reading will turn RED if the temperature goes beyond theHigh/Low Temperature as set in your Account. (see section 4.2.4)A30 A31
44 Wi-Fi Internet Viewing5.6 Camera Functions:Working with devices for iPhone®/iPad® Run the Hubble App on your iPhone®/iPad®. The Camera view appears on the screen.5.6.1 Add more cameras In Camera view, tap on the Motorola logo to go to the Add Camera page.(Picture i15) Tap on Add Camera to add another Camera (follow steps for iPhone®/iPad®setup Section 5.4.4.) (Picture i16) Once the Camera has been added, the Camera view will be automaticallydisplayed.i15 i16
Wi-Fi Internet Viewing 455.6.2 Remove a CameraYou can remove a Camera from your Account by following these steps: Tap the Settings icon on the General page, then tap on Camera Detail.(Picture i17) Select Remove Camera and tap on Yes to delete the unit from camera list.(Picture i18)i17 i18
46 Wi-Fi Internet Viewing5.6.3 Change your Account InformationYou can change the account information using your iPhone®/iPad®. Tap Account on the General page and the Account settings will appear onscreen. (Picture i19) Tap on Change Password to change your password by following theinstructions. Tap on Log Out to leave the account. Tap on Current plan, it will go to the link of Cloud Video Recording Service,to obtain more information, please visit our websitehttps://hubbleconnected.com/plans/. Tap on Send app log to send your Hubble App report to our server via e-mail;this should be sent if requested by a customer service agent.i19
Wi-Fi Internet Viewing 475.6.4 Camera settingsYou can change the Camera settings to tap the Settings icon on the Generalpage (Picture i20). You can review the Camera Name and Firmware version(Picture i21) and are allowed to change the Camera name by tapping on theexisting name and following the instructions. Tap on Notification Sensitivity to set the sensitivity of sound & motiondetection, and to set an Alert of High/Low temperature. (Picture i22)i20 i21i22
48 Wi-Fi Internet Viewing5.6.5 General settings Tap on Settings on the General page. (Picture i23)Tap on General Settings to change the format for Clock (12hr/24hr) &Temperature (°C / °F) and activate Notification Sound or Vibration. (Picture i24) Tap on Do Not Disturb, set the timer to the desired time and select ON, theCamera will not send any sound or alert to your iPhone®/iPad® for theduration of your setting. (Picture i25)i23 i24i25
Wi-Fi Internet Viewing 495.6.6 Hubble App Settings Tap on Settings on your iPhone®/iPad®, and the applications will appear, tapon the Hubble App and the settings will be shown on screen. (Picture i26)i26
50 Wi-Fi Internet Viewing5.6.7 Features of the Hubble AppOn Camera view, tap the viewing area and Function Icons will appear as follows.Two Way Communication Tap on to activate the function. Press theround button once to speak through the Camera. Toggle the button again tolisten to the audio feedback from the Camera. (Pictures i27, i28)i27 i28
Wi-Fi Internet Viewing 51Pan and Tilt Function:Tap the up and down buttons to tilt, the left and right buttons to pan. (Picturesi29, i30)i29 i30
52 Wi-Fi Internet ViewingTake Picture - Tap on Camera icon to capture photos from the Cameraview. (Picture i31)Note:Photos will be stored on the internal flash memory of your iPhone®/iPad®.i31
Wi-Fi Internet Viewing 53Melody To play one of the pre-set 5 melodies, tap on Melody to show theMelody menu and select the one you prefer to play on your Camera. (Picture i32)Temperature Display The temperature reading from the temperaturesensor at the back of the Camera will display on your iPhone®/iPad® screen(Picture i33). The readings will turn RED if the temperature goes beyond theHigh/Low Temperature as set in your Account. (see section 5.6.5)i32 i33

Navigation menu